From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [patch v2 1/2] pinctrl: samsung: don't truncate the last char
Date: Mon, 22 Jun 2015 23:51:27 +0000 [thread overview]
Message-ID: <55889F7F.9090106@samsung.com> (raw)
In-Reply-To: <20150622151223.GA14156@mwanda>
On 23.06.2015 00:12, Dan Carpenter wrote:
> We were allocating enough space because sizeof("-grp") and
> sizeof("-mux") are both equal to 5 but in the snprintf() we only allowed
> for 4 characters so the last 'p' and 'x' characters were truncated.
>
> The allocate and sprintf can be done in one step with the kasprintf().
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos5440.c b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> index f5619fb..fa84db6 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> @@ -44,9 +44,7 @@
> #define PIN_NAME_LENGTH 10
>
> #define GROUP_SUFFIX "-grp"
> -#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
> #define FUNCTION_SUFFIX "-mux"
> -#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
>
> /*
> * pin configuration type and its value are packed together into a 16-bits.
> @@ -215,12 +213,11 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
> * Allocate memory for pin group name. The pin group name is derived
> * from the node name from which these map entries are be created.
> */
> - gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
> + gname = kasprintf(GFP_KERNEL, "%s%s", np->name, GROUP_SUFFIX);
> if (!gname) {
> dev_err(dev, "failed to alloc memory for group name\n");
> goto free_map;
> }
> - snprintf(gname, strlen(np->name) + 4, "%s%s", np->name, GROUP_SUFFIX);
>
> /*
> * don't have config options? then skip over to creating function
> @@ -254,13 +251,12 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
> skip_cfgs:
> /* create the function map entry */
> if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) {
> - fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL);
> + fname = kasprintf(GFP_KERNEL,
> + "%s%s", np->name, FUNCTION_SUFFIX);
> if (!fname) {
> dev_err(dev, "failed to alloc memory for func name\n");
> goto free_cfg;
> }
> - snprintf(fname, strlen(np->name) + 4, "%s%s", np->name,
> - FUNCTION_SUFFIX);
>
> map[*nmaps].data.mux.group = gname;
> map[*nmaps].data.mux.function = fname;
> @@ -710,14 +706,12 @@ static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev,
> }
>
> /* derive pin group name from the node name */
> - gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
> - GFP_KERNEL);
> + gname = devm_kasprintf(dev, GFP_KERNEL,
> + "%s%s", cfg_np->name, GROUP_SUFFIX);
> if (!gname) {
> dev_err(dev, "failed to alloc memory for group name\n");
> return -ENOMEM;
> }
> - snprintf(gname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> - GROUP_SUFFIX);
>
> grp->name = gname;
> grp->pins = pin_list;
> @@ -731,14 +725,12 @@ skip_to_pin_function:
> continue;
>
> /* derive function name from the node name */
> - fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
> - GFP_KERNEL);
> + fname = devm_kasprintf(dev, GFP_KERNEL,
> + "%s%s", cfg_np->name, FUNCTION_SUFFIX);
> if (!fname) {
> dev_err(dev, "failed to alloc memory for func name\n");
> return -ENOMEM;
> }
> - snprintf(fname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> - FUNCTION_SUFFIX);
>
> func->name = fname;
> func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
>
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Dan Carpenter <dan.carpenter@oracle.com>,
Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Kukjin Kim <kgene@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [patch v2 1/2] pinctrl: samsung: don't truncate the last char
Date: Tue, 23 Jun 2015 08:51:27 +0900 [thread overview]
Message-ID: <55889F7F.9090106@samsung.com> (raw)
In-Reply-To: <20150622151223.GA14156@mwanda>
On 23.06.2015 00:12, Dan Carpenter wrote:
> We were allocating enough space because sizeof("-grp") and
> sizeof("-mux") are both equal to 5 but in the snprintf() we only allowed
> for 4 characters so the last 'p' and 'x' characters were truncated.
>
> The allocate and sprintf can be done in one step with the kasprintf().
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos5440.c b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> index f5619fb..fa84db6 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> @@ -44,9 +44,7 @@
> #define PIN_NAME_LENGTH 10
>
> #define GROUP_SUFFIX "-grp"
> -#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
> #define FUNCTION_SUFFIX "-mux"
> -#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
>
> /*
> * pin configuration type and its value are packed together into a 16-bits.
> @@ -215,12 +213,11 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
> * Allocate memory for pin group name. The pin group name is derived
> * from the node name from which these map entries are be created.
> */
> - gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
> + gname = kasprintf(GFP_KERNEL, "%s%s", np->name, GROUP_SUFFIX);
> if (!gname) {
> dev_err(dev, "failed to alloc memory for group name\n");
> goto free_map;
> }
> - snprintf(gname, strlen(np->name) + 4, "%s%s", np->name, GROUP_SUFFIX);
>
> /*
> * don't have config options? then skip over to creating function
> @@ -254,13 +251,12 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
> skip_cfgs:
> /* create the function map entry */
> if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) {
> - fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL);
> + fname = kasprintf(GFP_KERNEL,
> + "%s%s", np->name, FUNCTION_SUFFIX);
> if (!fname) {
> dev_err(dev, "failed to alloc memory for func name\n");
> goto free_cfg;
> }
> - snprintf(fname, strlen(np->name) + 4, "%s%s", np->name,
> - FUNCTION_SUFFIX);
>
> map[*nmaps].data.mux.group = gname;
> map[*nmaps].data.mux.function = fname;
> @@ -710,14 +706,12 @@ static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev,
> }
>
> /* derive pin group name from the node name */
> - gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
> - GFP_KERNEL);
> + gname = devm_kasprintf(dev, GFP_KERNEL,
> + "%s%s", cfg_np->name, GROUP_SUFFIX);
> if (!gname) {
> dev_err(dev, "failed to alloc memory for group name\n");
> return -ENOMEM;
> }
> - snprintf(gname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> - GROUP_SUFFIX);
>
> grp->name = gname;
> grp->pins = pin_list;
> @@ -731,14 +725,12 @@ skip_to_pin_function:
> continue;
>
> /* derive function name from the node name */
> - fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
> - GFP_KERNEL);
> + fname = devm_kasprintf(dev, GFP_KERNEL,
> + "%s%s", cfg_np->name, FUNCTION_SUFFIX);
> if (!fname) {
> dev_err(dev, "failed to alloc memory for func name\n");
> return -ENOMEM;
> }
> - snprintf(fname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> - FUNCTION_SUFFIX);
>
> func->name = fname;
> func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
>
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [patch v2 1/2] pinctrl: samsung: don't truncate the last char
Date: Tue, 23 Jun 2015 08:51:27 +0900 [thread overview]
Message-ID: <55889F7F.9090106@samsung.com> (raw)
In-Reply-To: <20150622151223.GA14156@mwanda>
On 23.06.2015 00:12, Dan Carpenter wrote:
> We were allocating enough space because sizeof("-grp") and
> sizeof("-mux") are both equal to 5 but in the snprintf() we only allowed
> for 4 characters so the last 'p' and 'x' characters were truncated.
>
> The allocate and sprintf can be done in one step with the kasprintf().
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos5440.c b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> index f5619fb..fa84db6 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> @@ -44,9 +44,7 @@
> #define PIN_NAME_LENGTH 10
>
> #define GROUP_SUFFIX "-grp"
> -#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
> #define FUNCTION_SUFFIX "-mux"
> -#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
>
> /*
> * pin configuration type and its value are packed together into a 16-bits.
> @@ -215,12 +213,11 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
> * Allocate memory for pin group name. The pin group name is derived
> * from the node name from which these map entries are be created.
> */
> - gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
> + gname = kasprintf(GFP_KERNEL, "%s%s", np->name, GROUP_SUFFIX);
> if (!gname) {
> dev_err(dev, "failed to alloc memory for group name\n");
> goto free_map;
> }
> - snprintf(gname, strlen(np->name) + 4, "%s%s", np->name, GROUP_SUFFIX);
>
> /*
> * don't have config options? then skip over to creating function
> @@ -254,13 +251,12 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
> skip_cfgs:
> /* create the function map entry */
> if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) {
> - fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL);
> + fname = kasprintf(GFP_KERNEL,
> + "%s%s", np->name, FUNCTION_SUFFIX);
> if (!fname) {
> dev_err(dev, "failed to alloc memory for func name\n");
> goto free_cfg;
> }
> - snprintf(fname, strlen(np->name) + 4, "%s%s", np->name,
> - FUNCTION_SUFFIX);
>
> map[*nmaps].data.mux.group = gname;
> map[*nmaps].data.mux.function = fname;
> @@ -710,14 +706,12 @@ static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev,
> }
>
> /* derive pin group name from the node name */
> - gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
> - GFP_KERNEL);
> + gname = devm_kasprintf(dev, GFP_KERNEL,
> + "%s%s", cfg_np->name, GROUP_SUFFIX);
> if (!gname) {
> dev_err(dev, "failed to alloc memory for group name\n");
> return -ENOMEM;
> }
> - snprintf(gname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> - GROUP_SUFFIX);
>
> grp->name = gname;
> grp->pins = pin_list;
> @@ -731,14 +725,12 @@ skip_to_pin_function:
> continue;
>
> /* derive function name from the node name */
> - fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
> - GFP_KERNEL);
> + fname = devm_kasprintf(dev, GFP_KERNEL,
> + "%s%s", cfg_np->name, FUNCTION_SUFFIX);
> if (!fname) {
> dev_err(dev, "failed to alloc memory for func name\n");
> return -ENOMEM;
> }
> - snprintf(fname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> - FUNCTION_SUFFIX);
>
> func->name = fname;
> func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
>
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Dan Carpenter <dan.carpenter@oracle.com>,
Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Kukjin Kim <kgene@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [patch v2 1/2] pinctrl: samsung: don't truncate the last char
Date: Tue, 23 Jun 2015 08:51:27 +0900 [thread overview]
Message-ID: <55889F7F.9090106@samsung.com> (raw)
In-Reply-To: <20150622151223.GA14156@mwanda>
On 23.06.2015 00:12, Dan Carpenter wrote:
> We were allocating enough space because sizeof("-grp") and
> sizeof("-mux") are both equal to 5 but in the snprintf() we only allowed
> for 4 characters so the last 'p' and 'x' characters were truncated.
>
> The allocate and sprintf can be done in one step with the kasprintf().
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos5440.c b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> index f5619fb..fa84db6 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> @@ -44,9 +44,7 @@
> #define PIN_NAME_LENGTH 10
>
> #define GROUP_SUFFIX "-grp"
> -#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
> #define FUNCTION_SUFFIX "-mux"
> -#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
>
> /*
> * pin configuration type and its value are packed together into a 16-bits.
> @@ -215,12 +213,11 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
> * Allocate memory for pin group name. The pin group name is derived
> * from the node name from which these map entries are be created.
> */
> - gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
> + gname = kasprintf(GFP_KERNEL, "%s%s", np->name, GROUP_SUFFIX);
> if (!gname) {
> dev_err(dev, "failed to alloc memory for group name\n");
> goto free_map;
> }
> - snprintf(gname, strlen(np->name) + 4, "%s%s", np->name, GROUP_SUFFIX);
>
> /*
> * don't have config options? then skip over to creating function
> @@ -254,13 +251,12 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
> skip_cfgs:
> /* create the function map entry */
> if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) {
> - fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL);
> + fname = kasprintf(GFP_KERNEL,
> + "%s%s", np->name, FUNCTION_SUFFIX);
> if (!fname) {
> dev_err(dev, "failed to alloc memory for func name\n");
> goto free_cfg;
> }
> - snprintf(fname, strlen(np->name) + 4, "%s%s", np->name,
> - FUNCTION_SUFFIX);
>
> map[*nmaps].data.mux.group = gname;
> map[*nmaps].data.mux.function = fname;
> @@ -710,14 +706,12 @@ static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev,
> }
>
> /* derive pin group name from the node name */
> - gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
> - GFP_KERNEL);
> + gname = devm_kasprintf(dev, GFP_KERNEL,
> + "%s%s", cfg_np->name, GROUP_SUFFIX);
> if (!gname) {
> dev_err(dev, "failed to alloc memory for group name\n");
> return -ENOMEM;
> }
> - snprintf(gname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> - GROUP_SUFFIX);
>
> grp->name = gname;
> grp->pins = pin_list;
> @@ -731,14 +725,12 @@ skip_to_pin_function:
> continue;
>
> /* derive function name from the node name */
> - fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
> - GFP_KERNEL);
> + fname = devm_kasprintf(dev, GFP_KERNEL,
> + "%s%s", cfg_np->name, FUNCTION_SUFFIX);
> if (!fname) {
> dev_err(dev, "failed to alloc memory for func name\n");
> return -ENOMEM;
> }
> - snprintf(fname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> - FUNCTION_SUFFIX);
>
> func->name = fname;
> func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2015-06-22 23:51 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-11 15:46 [patch] pinctrl: samsung: don't truncate the last char of "-grp" Dan Carpenter
2015-06-11 15:46 ` Dan Carpenter
2015-06-15 4:17 ` Krzysztof Kozlowski
2015-06-15 4:17 ` Krzysztof Kozlowski
2015-06-19 8:52 ` Dan Carpenter
2015-06-19 8:52 ` Dan Carpenter
2015-06-22 15:12 ` [patch v2 1/2] pinctrl: samsung: don't truncate the last char Dan Carpenter
2015-06-22 15:12 ` Dan Carpenter
2015-06-22 15:12 ` Dan Carpenter
2015-06-22 15:12 ` Dan Carpenter
2015-06-22 23:51 ` Krzysztof Kozlowski [this message]
2015-06-22 23:51 ` Krzysztof Kozlowski
2015-06-22 23:51 ` Krzysztof Kozlowski
2015-06-22 23:51 ` Krzysztof Kozlowski
2015-07-16 8:21 ` Linus Walleij
2015-07-16 8:21 ` Linus Walleij
2015-07-16 8:21 ` Linus Walleij
2015-06-22 15:13 ` [patch v2 2/2] pinctrl: samsung: remove "out of memory" messages Dan Carpenter
2015-06-22 15:13 ` Dan Carpenter
2015-06-22 15:13 ` Dan Carpenter
2015-06-22 15:13 ` Dan Carpenter
2015-06-22 23:53 ` Krzysztof Kozlowski
2015-06-22 23:53 ` Krzysztof Kozlowski
2015-06-22 23:53 ` Krzysztof Kozlowski
2015-06-22 23:53 ` Krzysztof Kozlowski
2015-07-16 8:22 ` Linus Walleij
2015-07-16 8:22 ` Linus Walleij
2015-07-16 8:22 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55889F7F.9090106@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.