[Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Marcel Apfelbaum]

Clear host multi-queue related features if the peer
doesn't support it.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
---
Notes:
 This fixes a guest CPU soft lock, however the virtio-net
 device will not work correctly. It seems that is
 peer's "fault", not knowing how to handle the situation.
 However, I submit this patch since it corrects the negotiation
 and saves us from a guest crash (!).

 Any ideas from the virtio/multi-queue developers on how to debug
 this further are welcomed.
    
 hw/net/virtio-net.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index 9281aa1..63e59e8 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -367,6 +367,11 @@ static int peer_has_ufo(VirtIONet *n)
     return n->has_ufo;
 }
 
+static int peer_has_multiqueue(VirtIONet *n)
+{
+    return n->multiqueue;
+}
+
 static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
                                        int version_1)
 {
@@ -469,6 +474,13 @@ static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features)
         virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
     }
 
+    if (!peer_has_multiqueue(n)) {
+        virtio_clear_feature(&features, VIRTIO_NET_F_MQ);
+        virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
+        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_VQ);
+        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_RX);
+    }
+
     if (!get_vhost_net(nc->peer)) {
         virtio_add_feature(&features, VIRTIO_F_VERSION_1);
         return features;
@@ -1314,7 +1326,6 @@ static void virtio_net_tx_bh(void *opaque)
 static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
 {
     n->multiqueue = multiqueue;
-
     virtio_net_set_queues(n);
 }
 
-- 
2.1.0

Re: [Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Michael S. Tsirkin]

On Thu, Jun 18, 2015 at 09:05:44PM +0300, Marcel Apfelbaum wrote:
> Clear host multi-queue related features if the peer
> doesn't support it.
> 
> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
> ---
> Notes:
>  This fixes a guest CPU soft lock, however the virtio-net
>  device will not work correctly. It seems that is
>  peer's "fault", not knowing how to handle the situation.
>  However, I submit this patch since it corrects the negotiation
>  and saves us from a guest crash (!).
> 
>  Any ideas from the virtio/multi-queue developers on how to debug
>  this further are welcomed.
>     
>  hw/net/virtio-net.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
> index 9281aa1..63e59e8 100644
> --- a/hw/net/virtio-net.c
> +++ b/hw/net/virtio-net.c
> @@ -367,6 +367,11 @@ static int peer_has_ufo(VirtIONet *n)
>      return n->has_ufo;
>  }
>  
> +static int peer_has_multiqueue(VirtIONet *n)
> +{
> +    return n->multiqueue;
> +}
> +
>  static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
>                                         int version_1)
>  {
> @@ -469,6 +474,13 @@ static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features)
>          virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
>      }
>  
> +    if (!peer_has_multiqueue(n)) {
> +        virtio_clear_feature(&features, VIRTIO_NET_F_MQ);
> +        virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_VQ);
> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_RX);
> +    }
> +
>      if (!get_vhost_net(nc->peer)) {
>          virtio_add_feature(&features, VIRTIO_F_VERSION_1);
>          return features;

_MQ makes sense but what about the rest? Why clear them?

> @@ -1314,7 +1326,6 @@ static void virtio_net_tx_bh(void *opaque)
>  static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
>  {
>      n->multiqueue = multiqueue;
> -
>      virtio_net_set_queues(n);
>  }
>  
> -- 
> 2.1.0

Re: [Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Marcel Apfelbaum]

On 06/23/2015 12:57 PM, Michael S. Tsirkin wrote:
> On Thu, Jun 18, 2015 at 09:05:44PM +0300, Marcel Apfelbaum wrote:
>> Clear host multi-queue related features if the peer
>> doesn't support it.
>>
>> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
>> ---
>> Notes:
>>   This fixes a guest CPU soft lock, however the virtio-net
>>   device will not work correctly. It seems that is
>>   peer's "fault", not knowing how to handle the situation.
>>   However, I submit this patch since it corrects the negotiation
>>   and saves us from a guest crash (!).
>>
>>   Any ideas from the virtio/multi-queue developers on how to debug
>>   this further are welcomed.
>>
>>   hw/net/virtio-net.c | 13 ++++++++++++-
>>   1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
>> index 9281aa1..63e59e8 100644
>> --- a/hw/net/virtio-net.c
>> +++ b/hw/net/virtio-net.c
>> @@ -367,6 +367,11 @@ static int peer_has_ufo(VirtIONet *n)
>>       return n->has_ufo;
>>   }
>>
>> +static int peer_has_multiqueue(VirtIONet *n)
>> +{
>> +    return n->multiqueue;
>> +}
>> +
>>   static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
>>                                          int version_1)
>>   {
>> @@ -469,6 +474,13 @@ static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features)
>>           virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
>>       }
>>
>> +    if (!peer_has_multiqueue(n)) {
>> +        virtio_clear_feature(&features, VIRTIO_NET_F_MQ);
>> +        virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
>> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_VQ);
>> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_RX);
>> +    }
>> +
>>       if (!get_vhost_net(nc->peer)) {
>>           virtio_add_feature(&features, VIRTIO_F_VERSION_1);
>>           return features;
>
> _MQ makes sense but what about the rest? Why clear them?
Guest's virtio driver doesn't like if MQ is off and any of the other flags remains ON.
It has a specific check for each of them and fails the loading if not all are off.

Thanks,
Marcel

>
>> @@ -1314,7 +1326,6 @@ static void virtio_net_tx_bh(void *opaque)
>>   static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
>>   {
>>       n->multiqueue = multiqueue;
>> -
>>       virtio_net_set_queues(n);
>>   }
>>
>> --
>> 2.1.0

Re: [Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Michael S. Tsirkin]

On Tue, Jun 23, 2015 at 01:23:10PM +0300, Marcel Apfelbaum wrote:
> On 06/23/2015 12:57 PM, Michael S. Tsirkin wrote:
> >On Thu, Jun 18, 2015 at 09:05:44PM +0300, Marcel Apfelbaum wrote:
> >>Clear host multi-queue related features if the peer
> >>doesn't support it.
> >>
> >>Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
> >>---
> >>Notes:
> >>  This fixes a guest CPU soft lock, however the virtio-net
> >>  device will not work correctly. It seems that is
> >>  peer's "fault", not knowing how to handle the situation.
> >>  However, I submit this patch since it corrects the negotiation
> >>  and saves us from a guest crash (!).
> >>
> >>  Any ideas from the virtio/multi-queue developers on how to debug
> >>  this further are welcomed.
> >>
> >>  hw/net/virtio-net.c | 13 ++++++++++++-
> >>  1 file changed, 12 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
> >>index 9281aa1..63e59e8 100644
> >>--- a/hw/net/virtio-net.c
> >>+++ b/hw/net/virtio-net.c
> >>@@ -367,6 +367,11 @@ static int peer_has_ufo(VirtIONet *n)
> >>      return n->has_ufo;
> >>  }
> >>
> >>+static int peer_has_multiqueue(VirtIONet *n)
> >>+{
> >>+    return n->multiqueue;
> >>+}
> >>+
> >>  static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
> >>                                         int version_1)
> >>  {
> >>@@ -469,6 +474,13 @@ static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features)
> >>          virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
> >>      }
> >>
> >>+    if (!peer_has_multiqueue(n)) {
> >>+        virtio_clear_feature(&features, VIRTIO_NET_F_MQ);
> >>+        virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
> >>+        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_VQ);
> >>+        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_RX);
> >>+    }
> >>+
> >>      if (!get_vhost_net(nc->peer)) {
> >>          virtio_add_feature(&features, VIRTIO_F_VERSION_1);
> >>          return features;
> >
> >_MQ makes sense but what about the rest? Why clear them?
> Guest's virtio driver doesn't like if MQ is off and any of the other flags remains ON.
> It has a specific check for each of them and fails the loading if not all are off.
> 
> Thanks,
> Marcel


I think you are mistaken.

        if (!virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ) &&
            (VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_RX,
                             "VIRTIO_NET_F_CTRL_VQ") ||
             VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_VLAN,
                             "VIRTIO_NET_F_CTRL_VQ") ||
             VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_GUEST_ANNOUNCE,
                             "VIRTIO_NET_F_CTRL_VQ") ||
             VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_MQ, "VIRTIO_NET_F_CTRL_VQ") ||
             VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR,
                             "VIRTIO_NET_F_CTRL_VQ"))) {
                return false;
        }

        return true;

So if CTRL VQ is not set, you can not have MQ or any of the others.



> >
> >>@@ -1314,7 +1326,6 @@ static void virtio_net_tx_bh(void *opaque)
> >>  static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
> >>  {
> >>      n->multiqueue = multiqueue;
> >>-
> >>      virtio_net_set_queues(n);
> >>  }
> >>
> >>--
> >>2.1.0

Re: [Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Marcel Apfelbaum]

On 06/23/2015 01:56 PM, Michael S. Tsirkin wrote:
> On Tue, Jun 23, 2015 at 01:23:10PM +0300, Marcel Apfelbaum wrote:
>> On 06/23/2015 12:57 PM, Michael S. Tsirkin wrote:
>>> On Thu, Jun 18, 2015 at 09:05:44PM +0300, Marcel Apfelbaum wrote:
>>>> Clear host multi-queue related features if the peer
>>>> doesn't support it.
>>>>
>>>> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
>>>> ---
>>>> Notes:
>>>>   This fixes a guest CPU soft lock, however the virtio-net
>>>>   device will not work correctly. It seems that is
>>>>   peer's "fault", not knowing how to handle the situation.
>>>>   However, I submit this patch since it corrects the negotiation
>>>>   and saves us from a guest crash (!).
>>>>
>>>>   Any ideas from the virtio/multi-queue developers on how to debug
>>>>   this further are welcomed.
>>>>
>>>>   hw/net/virtio-net.c | 13 ++++++++++++-
>>>>   1 file changed, 12 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
>>>> index 9281aa1..63e59e8 100644
>>>> --- a/hw/net/virtio-net.c
>>>> +++ b/hw/net/virtio-net.c
>>>> @@ -367,6 +367,11 @@ static int peer_has_ufo(VirtIONet *n)
>>>>       return n->has_ufo;
>>>>   }
>>>>
>>>> +static int peer_has_multiqueue(VirtIONet *n)
>>>> +{
>>>> +    return n->multiqueue;
>>>> +}
>>>> +
>>>>   static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
>>>>                                          int version_1)
>>>>   {
>>>> @@ -469,6 +474,13 @@ static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features)
>>>>           virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
>>>>       }
>>>>
>>>> +    if (!peer_has_multiqueue(n)) {
>>>> +        virtio_clear_feature(&features, VIRTIO_NET_F_MQ);
>>>> +        virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
>>>> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_VQ);
>>>> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_RX);
>>>> +    }
>>>> +
>>>>       if (!get_vhost_net(nc->peer)) {
>>>>           virtio_add_feature(&features, VIRTIO_F_VERSION_1);
>>>>           return features;
>>>
>>> _MQ makes sense but what about the rest? Why clear them?
>> Guest's virtio driver doesn't like if MQ is off and any of the other flags remains ON.
>> It has a specific check for each of them and fails the loading if not all are off.
>>
>> Thanks,
>> Marcel
>
>
> I think you are mistaken.
>
>          if (!virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ) &&
>              (VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_RX,
>                               "VIRTIO_NET_F_CTRL_VQ") ||
>               VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_VLAN,
>                               "VIRTIO_NET_F_CTRL_VQ") ||
>               VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_GUEST_ANNOUNCE,
>                               "VIRTIO_NET_F_CTRL_VQ") ||
>               VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_MQ, "VIRTIO_NET_F_CTRL_VQ") ||
>               VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR,
>                               "VIRTIO_NET_F_CTRL_VQ"))) {
>                  return false;
>          }
>
>          return true;
>
> So if CTRL VQ is not set, you can not have MQ or any of the others.
>
Hmm, I know what saw, but I don't fully understand why is happening.
I'll give another try and I'll return with more info.

Thanks,
Marcel

>
>
>>>
>>>> @@ -1314,7 +1326,6 @@ static void virtio_net_tx_bh(void *opaque)
>>>>   static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
>>>>   {
>>>>       n->multiqueue = multiqueue;
>>>> -
>>>>       virtio_net_set_queues(n);
>>>>   }
>>>>
>>>> --
>>>> 2.1.0
>

Re: [Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Jason Wang]

On 06/19/2015 02:05 AM, Marcel Apfelbaum wrote:
> Clear host multi-queue related features if the peer
> doesn't support it.
>
> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
> ---
> Notes:
>  This fixes a guest CPU soft lock, however the virtio-net
>  device will not work correctly. It seems that is
>  peer's "fault", not knowing how to handle the situation.
>  However, I submit this patch since it corrects the negotiation
>  and saves us from a guest crash (!).

Could you please describe how to reproduce this issue?

>
>  Any ideas from the virtio/multi-queue developers on how to debug
>  this further are welcomed.
>     
>  hw/net/virtio-net.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
> index 9281aa1..63e59e8 100644
> --- a/hw/net/virtio-net.c
> +++ b/hw/net/virtio-net.c
> @@ -367,6 +367,11 @@ static int peer_has_ufo(VirtIONet *n)
>      return n->has_ufo;
>  }
>  
> +static int peer_has_multiqueue(VirtIONet *n)
> +{
> +    return n->multiqueue;
> +}

The name is confusing, this is in fact whether or not guest support
multiqueue. To check peer's ability, you need check
n->nic_conf.peers.queues instead.

> +
>  static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
>                                         int version_1)
>  {
> @@ -469,6 +474,13 @@ static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features)
>          virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
>      }
>  
> +    if (!peer_has_multiqueue(n)) {
> +        virtio_clear_feature(&features, VIRTIO_NET_F_MQ);

I'm not quite understand this, VIRTIO_NET_F_MQ should work if peer has
only 1 queue.

> +        virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_VQ);
> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_RX);
> +    }
> +

Those features don't depend on multiqueue, why clear them?

>      if (!get_vhost_net(nc->peer)) {
>          virtio_add_feature(&features, VIRTIO_F_VERSION_1);
>          return features;
> @@ -1314,7 +1326,6 @@ static void virtio_net_tx_bh(void *opaque)
>  static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
>  {
>      n->multiqueue = multiqueue;
> -
>      virtio_net_set_queues(n);
>  }
>  

Re: [Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Marcel Apfelbaum]

On 06/24/2015 11:00 AM, Jason Wang wrote:
>
>
> On 06/19/2015 02:05 AM, Marcel Apfelbaum wrote:
>> Clear host multi-queue related features if the peer
>> doesn't support it.
>>
>> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
>> ---
>> Notes:
>>   This fixes a guest CPU soft lock, however the virtio-net
>>   device will not work correctly. It seems that is
>>   peer's "fault", not knowing how to handle the situation.
>>   However, I submit this patch since it corrects the negotiation
>>   and saves us from a guest crash (!).
>
> Could you please describe how to reproduce this issue?
Hi Jason,
Sorry for the late reply.
I was hoping that a vhost-user multi-queue "insider" will ask questions :)

This happens when we have OVS as backend without multi-queue support
and qemu/guest with multi-queue-support.


>
>>
>>   Any ideas from the virtio/multi-queue developers on how to debug
>>   this further are welcomed.
>>
>>   hw/net/virtio-net.c | 13 ++++++++++++-
>>   1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
>> index 9281aa1..63e59e8 100644
>> --- a/hw/net/virtio-net.c
>> +++ b/hw/net/virtio-net.c
>> @@ -367,6 +367,11 @@ static int peer_has_ufo(VirtIONet *n)
>>       return n->has_ufo;
>>   }
>>
>> +static int peer_has_multiqueue(VirtIONet *n)
>> +{
>> +    return n->multiqueue;
>> +}
>
> The name is confusing, this is in fact whether or not guest support
> multiqueue. To check peer's ability, you need check
> n->nic_conf.peers.queues instead.
I just wanted to mimic similar code, I have no issue against
this approach.

>
>> +
>>   static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int mergeable_rx_bufs,
>>                                          int version_1)
>>   {
>> @@ -469,6 +474,13 @@ static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features)
>>           virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
>>       }
>>
>> +    if (!peer_has_multiqueue(n)) {
>> +        virtio_clear_feature(&features, VIRTIO_NET_F_MQ);
>
> I'm not quite understand this, VIRTIO_NET_F_MQ should work if peer has
> only 1 queue.
Please explain, I thought  VIRTIO_NET_F_MQ flag *enables*
multi-queue, and in our case we pass queue=2 to vhost.

>
>> +        virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
>> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_VQ);
>> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_RX);
>> +    }
>> +
>
> Those features don't depend on multiqueue, why clear them?
Once VIRTIO_NET_F_MQ is cleared, the virtio driver from guest is complaining
about those other flags too.

Any explanations about how *it should* work are welcomed.
Again, the scenario is: backend doesn't support multi-queue, QEMU/guest do,
and queues=2 is passed on command line.


Thanks,
Marcel
>
>>       if (!get_vhost_net(nc->peer)) {
>>           virtio_add_feature(&features, VIRTIO_F_VERSION_1);
>>           return features;
>> @@ -1314,7 +1326,6 @@ static void virtio_net_tx_bh(void *opaque)
>>   static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
>>   {
>>       n->multiqueue = multiqueue;
>> -
>>       virtio_net_set_queues(n);
>>   }
>>
>

Re: [Qemu-devel] [PATCH] net/virtio: fix multi-queue negotiation

[Jason Wang]

On 06/26/2015 12:54 AM, Marcel Apfelbaum wrote:
> On 06/24/2015 11:00 AM, Jason Wang wrote:
>>
>>
>> On 06/19/2015 02:05 AM, Marcel Apfelbaum wrote:
>>> Clear host multi-queue related features if the peer
>>> doesn't support it.
>>>
>>> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
>>> ---
>>> Notes:
>>>   This fixes a guest CPU soft lock, however the virtio-net
>>>   device will not work correctly. It seems that is
>>>   peer's "fault", not knowing how to handle the situation.
>>>   However, I submit this patch since it corrects the negotiation
>>>   and saves us from a guest crash (!).
>>
>> Could you please describe how to reproduce this issue?
> Hi Jason,
> Sorry for the late reply.
> I was hoping that a vhost-user multi-queue "insider" will ask
> questions :)
>
> This happens when we have OVS as backend without multi-queue support
> and qemu/guest with multi-queue-support.
>
>
>>
>>>
>>>   Any ideas from the virtio/multi-queue developers on how to debug
>>>   this further are welcomed.
>>>
>>>   hw/net/virtio-net.c | 13 ++++++++++++-
>>>   1 file changed, 12 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
>>> index 9281aa1..63e59e8 100644
>>> --- a/hw/net/virtio-net.c
>>> +++ b/hw/net/virtio-net.c
>>> @@ -367,6 +367,11 @@ static int peer_has_ufo(VirtIONet *n)
>>>       return n->has_ufo;
>>>   }
>>>
>>> +static int peer_has_multiqueue(VirtIONet *n)
>>> +{
>>> +    return n->multiqueue;
>>> +}
>>
>> The name is confusing, this is in fact whether or not guest support
>> multiqueue. To check peer's ability, you need check
>> n->nic_conf.peers.queues instead.
> I just wanted to mimic similar code, I have no issue against
> this approach.
>
>>
>>> +
>>>   static void virtio_net_set_mrg_rx_bufs(VirtIONet *n, int
>>> mergeable_rx_bufs,
>>>                                          int version_1)
>>>   {
>>> @@ -469,6 +474,13 @@ static uint64_t
>>> virtio_net_get_features(VirtIODevice *vdev, uint64_t features)
>>>           virtio_clear_feature(&features, VIRTIO_NET_F_HOST_UFO);
>>>       }
>>>
>>> +    if (!peer_has_multiqueue(n)) {
>>> +        virtio_clear_feature(&features, VIRTIO_NET_F_MQ);
>>
>> I'm not quite understand this, VIRTIO_NET_F_MQ should work if peer has
>> only 1 queue.
> Please explain, I thought  VIRTIO_NET_F_MQ flag *enables*
> multi-queue, and in our case we pass queue=2 to vhost.
>
>>
>>> +        virtio_clear_feature(&features, VIRTIO_NET_F_GUEST_ANNOUNCE);
>>> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_VQ);
>>> +        virtio_clear_feature(&features, VIRTIO_NET_F_CTRL_RX);
>>> +    }
>>> +
>>
>> Those features don't depend on multiqueue, why clear them?
> Once VIRTIO_NET_F_MQ is cleared, the virtio driver from guest is
> complaining
> about those other flags too.
>
> Any explanations about how *it should* work are welcomed.
> Again, the scenario is: backend doesn't support multi-queue,
> QEMU/guest do,
> and queues=2 is passed on command line.
>

In this case, backend should just fail the initialization like what
we've done for tap. I believe vhost-user should check whether or not its
backend can support up to 2 queues and fail if not.

Thanks

>
> Thanks,
> Marcel
>>
>>>       if (!get_vhost_net(nc->peer)) {
>>>           virtio_add_feature(&features, VIRTIO_F_VERSION_1);
>>>           return features;
>>> @@ -1314,7 +1326,6 @@ static void virtio_net_tx_bh(void *opaque)
>>>   static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
>>>   {
>>>       n->multiqueue = multiqueue;
>>> -
>>>       virtio_net_set_queues(n);
>>>   }
>>>
>>
>