[RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Chunyan Zhang]

From: Billows Wu <billows.wu@spreadtrum.com>

The Spreadtrum MMC host driver is used to support EMMC, SD, and
SDIO types of memory cards.

Signed-off-by: Billows Wu <billows.wu@spreadtrum.com>
Reviewed-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
 drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
 drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
 drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
 6 files changed, 2027 insertions(+)
 create mode 100644 drivers/mmc/host/sprd_sdhost.c
 create mode 100644 drivers/mmc/host/sprd_sdhost.h
 create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
 create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h

diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
new file mode 100644
index 0000000..e7a66e8
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost.c
@@ -0,0 +1,1270 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+
+#include "sprd_sdhost.h"
+#include "sprd_sdhost_debugfs.h"
+
+#define DRIVER_NAME "sdhost"
+#define SDHOST_CAPS \
+		(MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
+		MMC_CAP_ERASE |	 MMC_CAP_UHS_SDR50 | \
+		MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
+
+struct sdhost_caps_data {
+	char *name;
+	uint32_t ocr_avail;
+	uint32_t caps;
+	uint32_t caps2;
+	uint32_t pm_caps;
+	/* TODO: we will obtain these values from regulator and clock
+	 * phandles after LDO and clock function is OK
+	 */
+	uint32_t base_clk;
+	uint32_t signal_default_voltage;
+};
+
+struct sdhost_caps_data sd_caps_info = {
+	.name = "sd",
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
+	.caps = SDHOST_CAPS,
+	.caps2 = MMC_CAP2_HC_ERASE_SZ,
+	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
+	.base_clk = 192000000,
+	.signal_default_voltage = 3000000,
+};
+
+struct sdhost_caps_data wifi_caps_info = {
+	.name = "wifi",
+	.ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
+	    MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,
+	.pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
+	.base_clk = 76000000,
+};
+
+struct sdhost_caps_data emmc_caps_info = {
+	.name = "emmc",
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
+	.caps = SDHOST_CAPS |
+	    MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
+	    MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
+	.caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
+	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
+	.base_clk = 192000000,
+	.signal_default_voltage = 1800000,
+};
+
+const struct of_device_id sdhost_of_match[] = {
+	{.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
+	{.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
+	{.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
+	{ /* sentinel */ }
+};
+
+void _reset_ios(struct sdhost_host *host)
+{
+	_sdhost_disable_all_int(host->ioaddr);
+
+	host->ios.clock = 0;
+	host->ios.vdd = 0;
+	/* host->ios.bus_mode    = MMC_BUSMODE_OPENDRAIN; */
+	/* host->ios.chip_select = MMC_CS_DONTCARE; */
+	host->ios.power_mode = MMC_POWER_OFF;
+	host->ios.bus_width = MMC_BUS_WIDTH_1;
+	host->ios.timing = MMC_TIMING_LEGACY;
+	host->ios.signal_voltage = MMC_SIGNAL_VOLTAGE_330;
+	/*host->ios.drv_type    = MMC_SET_DRIVER_TYPE_B; */
+
+	_sdhost_reset(host->ioaddr, _RST_ALL);
+	_sdhost_set_delay(host->ioaddr, host->write_delay,
+			  host->read_pos_delay, host->read_neg_delay);
+}
+
+int __local_pm_suspend(struct sdhost_host *host)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	_sdhost_disable_all_int(host->ioaddr);
+	_sdhost_all_clk_off(host->ioaddr);
+	clk_disable(host->clk);
+	/* wake lock */
+	spin_unlock_irqrestore(&host->lock, flags);
+	clk_unprepare(host->clk);
+	synchronize_irq(host->irq);
+
+	return 0;
+}
+
+int __local_pm_resume(struct sdhost_host *host)
+{
+	unsigned long flags;
+
+	clk_prepare(host->clk);
+	spin_lock_irqsave(&host->lock, flags);
+	clk_enable(host->clk);
+	if (host->ios.clock) {
+		_sdhost_sd_clk_off(host->ioaddr);
+		_sdhost_clk_set_and_on(host->ioaddr,
+				       _sdhost_calc_div(host->base_clk,
+							host->ios.clock));
+		_sdhost_sd_clk_on(host->ioaddr);
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return 0;
+}
+
+void pm_runtime_setting(struct platform_device *pdev, struct sdhost_host *host)
+{
+	pm_runtime_set_active(&pdev->dev);
+#ifdef CONFIG_PM_RUNTIME
+	pm_suspend_ignore_children(&pdev->dev, true);
+#endif
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+}
+
+int _runtime_get(struct sdhost_host *host)
+{
+	return pm_runtime_get_sync(host->mmc->parent);
+}
+
+int _runtime_put(struct sdhost_host *host)
+{
+	pm_runtime_mark_last_busy(host->mmc->parent);
+	return pm_runtime_put_autosuspend(host->mmc->parent);
+}
+
+int _runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	return __local_pm_suspend(host);
+}
+
+int _runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	return __local_pm_resume(host);
+}
+
+int _runtime_idle(struct device *dev)
+{
+	return 0;
+}
+
+int _pm_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	_runtime_get(host);
+
+	host->mmc->pm_flags = host->mmc->pm_caps;
+
+	pr_debug("%s(%s):\n"
+		 "sdhost clock = %d\n"
+		 "sdhost vdd = %d\n"
+		 "sdhost bus_mode = %d\n"
+		 "sdhost chip_select = %d\n"
+		 "sdhost power_mode = %d\n"
+		 "sdhost bus_width = %d\n"
+		 "sdhost timing = %d\n"
+		 "sdhost signal_voltage = %d\n"
+		 "sdhost drv_type = %d\n",
+		 __func__, host->device_name,
+		 host->ios.clock,
+		 host->ios.vdd,
+		 host->ios.bus_mode,
+		 host->ios.chip_select,
+		 host->ios.power_mode,
+		 host->ios.bus_width,
+		 host->ios.timing,
+		 host->ios.signal_voltage, host->ios.drv_type);
+
+	return __local_pm_suspend(host);
+}
+
+int _pm_resume(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+	struct mmc_ios ios;
+
+	__local_pm_resume(host);
+
+	ios = host->mmc->ios;
+	_reset_ios(host);
+	host->mmc->ops->set_ios(host->mmc, &ios);
+
+	pr_debug("%s(%s):\n"
+		 "sdhost clock = %d\n"
+		 "sdhost vdd = %d\n"
+		 "sdhost bus_mode = %d\n"
+		 "sdhost chip_select = %d\n"
+		 "sdhost power_mode = %d\n"
+		 "sdhost bus_width = %d\n"
+		 "sdhost timing = %d\n"
+		 "sdhost signal_voltage = %d\n"
+		 "sdhost drv_type = %d\n",
+		 __func__, host->device_name,
+		 host->ios.clock,
+		 host->ios.vdd,
+		 host->ios.bus_mode,
+		 host->ios.chip_select,
+		 host->ios.power_mode,
+		 host->ios.bus_width,
+		 host->ios.timing,
+		 host->ios.signal_voltage, host->ios.drv_type);
+
+	_runtime_put(host);
+
+	return 0;
+}
+
+void __get_rsp(struct sdhost_host *host)
+{
+	u32 i, offset;
+	unsigned int flags = host->cmd->flags;
+	u32 *resp = host->cmd->resp;
+	void __iomem *addr = host->ioaddr;
+
+	if (!(flags & MMC_RSP_PRESENT))
+		return;
+
+	if (flags & MMC_RSP_136) {
+		/* CRC is stripped so we need to do some shifting. */
+		for (i = 0, offset = 12; i < 3; i++, offset -= 4) {
+			resp[i] =
+			    _sdhost_readl(addr, SDHOST_32_RESP + offset) << 8;
+			resp[i] |=
+			    _sdhost_readb(addr, SDHOST_32_RESP + offset - 1);
+		}
+		resp[3] = _sdhost_readl(addr, SDHOST_32_RESP) << 8;
+	} else {
+		resp[0] = _sdhost_readl(addr, SDHOST_32_RESP);
+	}
+}
+
+void _send_cmd(struct sdhost_host *host, struct mmc_command *cmd)
+{
+	struct mmc_data *data = cmd->data;
+	int sg_cnt;
+	u32 flag = 0;
+	u16 rsp_type = 0;
+	int if_has_data = 0;
+	int if_multi = 0;
+	int if_rd = 0;
+	int if_dma = 0;
+	uint16_t auto_cmd = __ACMD_DIS;
+
+	pr_debug("sdhost %s cmd %d, arg 0x%x, flag 0x%x\n",
+		 host->device_name, cmd->opcode, cmd->arg, cmd->flags);
+	if (cmd->data)
+		pr_debug("sdhost %s block size %d, cnt %d\n",
+			 host->device_name, cmd->data->blksz,
+			 cmd->data->blocks);
+
+	_sdhost_disable_all_int(host->ioaddr);
+
+	if (38 == cmd->opcode) {
+		/* if it is erase command , it's busy time will long,
+		 * so we set long timeout value here.
+		 */
+		mod_timer(&host->timer, jiffies + 10 * HZ);
+		_sdhost_writeb(host->ioaddr, __TIMEOUT_MAX_VAL,
+			       SDHOST_8_TIMEOUT);
+	} else {
+		mod_timer(&host->timer, jiffies + 3 * HZ);
+		_sdhost_writeb(host->ioaddr, host->data_time_out_val,
+			       SDHOST_8_TIMEOUT);
+	}
+
+	host->cmd = cmd;
+	if (data) {
+		/* set data param */
+		WARN_ON((data->blksz * data->blocks > 524288) ||
+		       (data->blksz > host->mmc->max_blk_size) ||
+		       (data->blocks > 65535));
+
+		data->bytes_xfered = 0;
+
+		if_has_data = 1;
+		if_rd = (data->flags & MMC_DATA_READ);
+		if_multi = (mmc_op_multi(cmd->opcode) || data->blocks > 1);
+		if (if_rd && !if_multi)
+			flag = _DATA_FILTER_RD_SIGLE;
+		else if (if_rd && if_multi)
+			flag = _DATA_FILTER_RD_MULTI;
+		else if (!if_rd && !if_multi)
+			flag = _DATA_FILTER_WR_SIGLE;
+		else
+			flag = _DATA_FILTER_WR_MULT;
+
+		if (!host->auto_cmd_mode)
+			flag |= _INT_ERR_ACMD;
+
+		if_dma = 1;
+		auto_cmd = host->auto_cmd_mode;
+		_sdhost_set_blk_size(host->ioaddr, data->blksz);
+
+		sg_cnt = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+				    (data->flags & MMC_DATA_READ) ?
+				    DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		if (1 == sg_cnt) {
+			_sdhost_set_dma(host->ioaddr, __SDMA_MOD);
+			_sdhost_set_16_blk_cnt(host->ioaddr, data->blocks);
+			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
+				       SDHOST_32_SYS_ADDR);
+		} else {
+			WARN_ON(1);
+			flag |= _INT_ERR_ADMA;
+			_sdhost_set_dma(host->ioaddr, __32_ADMA_MOD);
+			_sdhost_set_32_blk_cnt(host->ioaddr, data->blocks);
+			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
+				       SDHOST_32_SYS_ADDR);
+		}
+	} else {
+		/* _sdhost_set_trans_mode(host->ioaddr,
+		 * 0, 0, __ACMD_DIS, 0, 0);
+		 */
+	}
+
+	_sdhost_writel(host->ioaddr, cmd->arg, SDHOST_32_ARG);
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1B:
+		rsp_type = _RSP1B_5B;
+		flag |= _CMD_FILTER_R1B;
+		break;
+	case MMC_RSP_NONE:
+		rsp_type = _RSP0;
+		flag |= _CMD_FILTER_R0;
+		break;
+	case MMC_RSP_R2:
+		rsp_type = _RSP2;
+		flag |= _CMD_FILTER_R2;
+		break;
+
+	case MMC_RSP_R4:
+		rsp_type = _RSP3_4;
+		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
+		break;
+
+	case MMC_RSP_R1:
+	case MMC_RSP_R1 & ~MMC_RSP_CRC:
+		rsp_type = _RSP1_5_6_7;
+		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
+		break;
+
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	host->int_filter = flag;
+	_sdhost_enable_int(host->ioaddr, flag);
+	pr_debug("sdhost %s cmd:%d rsp:%d intflag:0x%x\n"
+		 "if_multi:0x%x if_rd:0x%x auto_cmd:0x%x if_dma:0x%x\n",
+		 host->device_name, cmd->opcode, mmc_resp_type(cmd),
+		 flag, if_multi, if_rd, auto_cmd, if_dma);
+	_sdhost_set_trans_and_cmd(host->ioaddr, if_multi, if_rd, auto_cmd,
+		if_multi, if_dma, cmd->opcode, if_has_data, rsp_type);
+}
+
+void _cmd_irq(struct sdhost_host *host, u32 intmask)
+{
+	if (0 == intmask) {
+		WARN_ON(1);
+		return;
+	}
+
+	if (!host->cmd) {
+		pr_err("%s: got command interrupt 0x%08x even though no command operation was in process\n",
+		     host->device_name, (unsigned)intmask);
+		return;
+	}
+
+	if (_INT_ERR_CMD_TIMEOUT & intmask)
+		host->cmd->error = -ETIMEDOUT;
+	else if ((_INT_ERR_CMD_CRC | _INT_ERR_CMD_END |
+		  _INT_ERR_CMD_INDEX) & intmask)
+		host->cmd->error = -EILSEQ;
+}
+
+void _data_irq(struct sdhost_host *host, u32 intmask)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	if (data) {
+		/* current error is happened in data token */
+		if (_INT_ERR_DATA_TIMEOUT & intmask)
+			data->error = -ETIMEDOUT;
+		else
+			data->error = -EILSEQ;
+	} else {
+		/* current error is happend in response with busy */
+		if (_INT_ERR_DATA_TIMEOUT & intmask)
+			cmd->error = -ETIMEDOUT;
+		else
+			cmd->error = -EILSEQ;
+	}
+}
+
+void _trans_end_irq(struct sdhost_host *host, u32 intmask)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	if (data) {
+		dma_unmap_sg(mmc_dev(host->mmc),
+			     data->sg, data->sg_len,
+			     (data->flags & MMC_DATA_READ) ?
+			     DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		data->error = 0;
+		data->bytes_xfered = data->blksz * data->blocks;
+	} else {
+		/* R1B also can produce transferComplete interrupt */
+		cmd->error = 0;
+	}
+}
+
+int _err_irq_handle(struct sdhost_host *host, u32 intmask)
+{
+	int ret = 1;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	/* some error happened in command */
+	_cmd_irq(host, intmask & _INT_FILTER_ERR);
+	if (_INT_FILTER_ERR_DATA & intmask)
+		/* some error happened in data token or command with R1B */
+		_data_irq(host, intmask);
+
+	if (_INT_ERR_ACMD & intmask)
+		/* Auto cmd12 and cmd23 error is belong to data token error */
+		data->error = -EILSEQ;
+
+	if (_INT_ERR_ADMA & intmask)
+		data->error = -EIO;
+
+	/* for debug */
+	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
+	dump_sdio_reg(host);
+	_sdhost_disable_all_int(host->ioaddr);
+
+	/* if current error happened in data token we send cmd12 to stop it*/
+	if ((mrq->cmd == cmd) && (mrq->stop)) {
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		_send_cmd(host, mrq->stop);
+	} else {
+		/* request finish with error, so reset it
+		 * and stop the request
+		 */
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		tasklet_schedule(&host->finish_tasklet);
+	}
+
+	return ret;
+}
+
+int _normal_irq_handle(struct sdhost_host *host, u32 intmask)
+{
+	int ret = 0;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+
+	/* delete irq that wanted in filter */
+	/* _sdhost_clear_int(host->ioaddr,
+	 *_INT_FILTER_NORMAL & intmask);
+	 */
+	host->int_filter &= ~(_INT_FILTER_NORMAL & intmask);
+	if (_INT_DMA_END & intmask)
+		_sdhost_writel(host->ioaddr,
+			_sdhost_readl(host->ioaddr,
+				SDHOST_32_SYS_ADDR),
+				SDHOST_32_SYS_ADDR);
+
+	if (_INT_CMD_END & intmask) {
+		cmd->error = 0;
+		__get_rsp(host);
+	}
+	if (_INT_TRAN_END & intmask)
+		_trans_end_irq(host, intmask);
+	if (!(_INT_FILTER_NORMAL & host->int_filter)) {
+		/* current cmd finished */
+		_sdhost_disable_all_int(host->ioaddr);
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		if (mrq->sbc == cmd) {
+			_send_cmd(host, mrq->cmd);
+		} else if ((mrq->cmd == host->cmd)
+			&& (mrq->stop)) {
+				_send_cmd(host, mrq->stop);
+		} else {
+			/* finish with success and stop the
+			 * request
+			 */
+			tasklet_schedule(&host->finish_tasklet);
+			ret = 1;
+		}
+	}
+
+	return ret;
+}
+
+irqreturn_t _irq_func(int irq, void *param)
+{
+	u32 intmask;
+	struct sdhost_host *host = (struct sdhost_host *)param;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data;
+
+	spin_lock(&host->lock);
+	/* maybe _timeout_func run in one core and _irq_func run in
+	 * another core, this will panic if access cmd->data
+	 */
+	if ((!mrq) || (!cmd)) {
+		spin_unlock(&host->lock);
+		return IRQ_NONE;
+	}
+	data = cmd->data;
+
+	intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
+	if (!intmask) {
+		spin_unlock(&host->lock);
+		return IRQ_NONE;
+	}
+	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
+
+	/* disable unused interrupt */
+	_sdhost_clear_int(host->ioaddr, intmask);
+	/* just care about the interrupt that we want */
+	intmask &= host->int_filter;
+
+	while (intmask) {
+		int ret;
+
+		if (_INT_FILTER_ERR & intmask) {
+			ret = _err_irq_handle(host, intmask);
+			if (ret)
+				goto out;
+		} else {
+			ret = _normal_irq_handle(host, intmask);
+			if (ret)
+				goto out;
+		}
+
+		intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
+		_sdhost_clear_int(host->ioaddr, intmask);
+		intmask &= host->int_filter;
+	};
+
+out:
+	spin_unlock(&host->lock);
+	return IRQ_HANDLED;
+}
+
+void _tasklet_func(unsigned long param)
+{
+	struct sdhost_host *host = (struct sdhost_host *)param;
+	unsigned long flags;
+	struct mmc_request *mrq;
+
+	del_timer(&host->timer);
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (!host->mrq) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+	mrq = host->mrq;
+	host->mrq = NULL;
+	host->cmd = NULL;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	pr_debug("sdhost %s cmd %d data %d\n",
+		 host->device_name, mrq->cmd->error,
+		 ((!!mrq->cmd->data) ? mrq->cmd->data->error : 0));
+	mmc_request_done(host->mmc, mrq);
+	_runtime_put(host);
+}
+
+void _timeout_func(unsigned long data)
+{
+	struct sdhost_host *host = (struct sdhost_host *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (host->mrq) {
+		pr_info("sdhost %s Timeout waiting for hardware interrupt!\n",
+			host->device_name);
+		dump_sdio_reg(host);
+		if (host->cmd->data)
+			host->cmd->data->error = -ETIMEDOUT;
+		else if (host->cmd)
+			host->cmd->error = -ETIMEDOUT;
+		else
+			host->mrq->cmd->error = -ETIMEDOUT;
+
+		_sdhost_disable_all_int(host->ioaddr);
+		_sdhost_reset(host->ioaddr, _RST_CMD | _RST_DATA);
+		tasklet_schedule(&host->finish_tasklet);
+	}
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	host->mrq = mrq;
+	/* 1 find whether card is still in slot */
+	if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE)) {
+		if (!mmc_gpio_get_cd(host->mmc)) {
+			mrq->cmd->error = -ENOMEDIUM;
+			tasklet_schedule(&host->finish_tasklet);
+			mmiowb();
+			spin_unlock_irqrestore(&host->lock, flags);
+			return;
+		}
+		/* else asume sdcard is present */
+	}
+
+	/*
+	 * in our control we can not use auto cmd12 and auto cmd23 together
+	 * so in following program we use auto cmd23 prior to auto cmd12
+	 */
+	pr_debug("sdhost %s request %d %d %d\n",
+		 host->device_name, !!mrq->sbc, !!mrq->cmd, !!mrq->stop);
+	host->auto_cmd_mode = __ACMD_DIS;
+	if (!mrq->sbc && mrq->stop && SDHOST_FLAG_EN_ACMD12) {
+		host->auto_cmd_mode = __ACMD12;
+		mrq->data->stop = NULL;
+		mrq->stop = NULL;
+	}
+
+	/* 3 send cmd list */
+	if ((mrq->sbc) && SDHOST_FLAG_EN_ACMD23) {
+		host->auto_cmd_mode = __ACMD23;
+		_send_cmd(host, mrq->cmd);
+	} else if (mrq->sbc)
+		_send_cmd(host, mrq->sbc);
+	else
+		_send_cmd(host, mrq->cmd);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void signal_voltage_on_off(struct sdhost_host *host, uint32_t on_off)
+{
+	if (!host->mmc->supply.vqmmc) {
+		pr_err("%s(%s) there is no signal voltage!\n",
+		       __func__, host->device_name);
+		return;
+	}
+
+	if (on_off && (!host->sdio_1_8v_signal_enabled)) {
+		if (!regulator_enable(host->mmc->supply.vqmmc) &&
+			regulator_is_enabled(host->mmc->supply.vqmmc)) {
+			host->sdio_1_8v_signal_enabled = true;
+			pr_info("%s(%s) signal voltage enable success!\n",
+					__func__, host->device_name);
+		} else
+			pr_err("%s(%s) signal voltage enable fail!\n",
+				__func__, host->device_name);
+
+	} else if (!on_off && host->sdio_1_8v_signal_enabled) {
+		if (!regulator_disable(host->mmc->supply.vqmmc) &&
+			!regulator_is_enabled(host->mmc->supply.vqmmc)) {
+			host->sdio_1_8v_signal_enabled = false;
+			pr_info("%s(%s) signal voltage disable success!\n",
+				__func__, host->device_name);
+		} else
+			pr_err("%s(%s) signal voltage disable fail\n",
+				__func__, host->device_name);
+	}
+}
+
+/*
+ * 1 This votage is always poweron
+ * 2 initial votage is 2.7v~3.6v
+ * 3 It can be reconfig to 1.7v~1.95v
+ */
+int sdhost_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int err;
+
+	pr_debug("%s(%s) vqmmc:\n"
+		 "sdhost clock = %d-->%d\n"
+		 "sdhost vdd = %d-->%d\n"
+		 "sdhost bus_mode = %d-->%d\n"
+		 "sdhost chip_select = %d-->%d\n"
+		 "sdhost power_mode = %d-->%d\n"
+		 "sdhost bus_width = %d-->%d\n"
+		 "sdhost timing = %d-->%d\n"
+		 "sdhost signal_voltage = %d-->%d\n"
+		 "sdhost drv_type = %d-->%d\n",
+		 __func__, host->device_name,
+		 host->ios.clock, ios->clock,
+		 host->ios.vdd, ios->vdd,
+		 host->ios.bus_mode, ios->bus_mode,
+		 host->ios.chip_select, ios->chip_select,
+		 host->ios.power_mode, ios->power_mode,
+		 host->ios.bus_width, ios->bus_width,
+		 host->ios.timing, ios->timing,
+		 host->ios.signal_voltage, ios->signal_voltage,
+		 host->ios.drv_type, ios->drv_type);
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (!mmc->supply.vqmmc) {
+		/* there are no 1.8v signal votage. */
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		/* err = -EINVAL; */
+		err = 0;
+		pr_err("sdhost %s There is no signalling voltage\n",
+		       host->device_name);
+		return err;
+	}
+
+	/* I/O power supply */
+	if (ios->signal_voltage == host->ios.signal_voltage) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		return 0;
+	}
+
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    3000000, 3000000);
+		break;
+	case MMC_SIGNAL_VOLTAGE_180:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    1800000, 1800000);
+		break;
+	case MMC_SIGNAL_VOLTAGE_120:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    1100000, 1300000);
+		break;
+	default:
+		err = -EIO;
+		break;
+	}
+	if (likely(!err))
+		host->ios.signal_voltage = ios->signal_voltage;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+	WARN(err, "Switching to signalling voltage  failed\n");
+	return err;
+}
+
+void sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	pr_debug("%s(%s) ios:\n"
+		 "sdhost clock = %d-->%d\n"
+		 "sdhost vdd = %d-->%d\n"
+		 "sdhost bus_mode = %d-->%d\n"
+		 "sdhost chip_select = %d-->%d\n"
+		 "sdhost power_mode = %d-->%d\n"
+		 "sdhost bus_width = %d-->%d\n"
+		 "sdhost timing = %d-->%d\n"
+		 "sdhost signal_voltage = %d-->%d\n"
+		 "sdhost drv_type = %d-->%d\n",
+		 __func__, host->device_name,
+		 host->ios.clock, ios->clock,
+		 host->ios.vdd, ios->vdd,
+		 host->ios.bus_mode, ios->bus_mode,
+		 host->ios.chip_select, ios->chip_select,
+		 host->ios.power_mode, ios->power_mode,
+		 host->ios.bus_width, ios->bus_width,
+		 host->ios.timing, ios->timing,
+		 host->ios.signal_voltage, ios->signal_voltage,
+		 host->ios.drv_type, ios->drv_type);
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+	dump_sdio_reg(host);
+
+	if (0 == ios->clock) {
+		_sdhost_all_clk_off(host->ioaddr);
+		host->ios.clock = 0;
+	} else if (ios->clock != host->ios.clock) {
+		uint32_t div;
+
+		div = _sdhost_calc_div(host->base_clk, ios->clock);
+		_sdhost_sd_clk_off(host->ioaddr);
+		_sdhost_clk_set_and_on(host->ioaddr, div);
+		_sdhost_sd_clk_on(host->ioaddr);
+		host->ios.clock = ios->clock;
+		host->data_time_out_val =
+			_sdhost_calc_timeout(host->base_clk, div, 3);
+	}
+
+	if (ios->power_mode != host->ios.power_mode) {
+		switch (ios->power_mode) {
+		case MMC_POWER_OFF:
+			signal_voltage_on_off(host, 0);
+			if (mmc->supply.vmmc)
+				mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, 0);
+			_reset_ios(host);
+			host->ios.power_mode = ios->power_mode;
+			break;
+		case MMC_POWER_ON:
+		case MMC_POWER_UP:
+			if (mmc->supply.vmmc)
+				mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, ios->vdd);
+			signal_voltage_on_off(host, 1);
+			host->ios.power_mode = ios->power_mode;
+			host->ios.vdd = ios->vdd;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* flash power voltage select */
+	if (ios->vdd != host->ios.vdd) {
+		if (mmc->supply.vmmc) {
+			pr_info("sdhost %s 3.0 %d!\n",
+				host->device_name, ios->vdd);
+			mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, ios->vdd);
+		}
+		host->ios.vdd = ios->vdd;
+	}
+
+	if (ios->bus_width != host->ios.bus_width) {
+		_sdhost_set_buswidth(host->ioaddr, ios->bus_width);
+		host->ios.bus_width = ios->bus_width;
+	}
+
+	if (ios->timing != host->ios.timing) {
+		/* 1 first close SD clock */
+		_sdhost_sd_clk_off(host->ioaddr);
+		/* 2 set timing mode */
+		switch (ios->timing) {	/* timing specification used */
+		case MMC_TIMING_LEGACY:
+			/*basic clock mode */
+			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
+			break;
+		case MMC_TIMING_MMC_HS:
+		case MMC_TIMING_SD_HS:
+			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
+			break;
+		case MMC_TIMING_UHS_SDR12:
+		case MMC_TIMING_UHS_SDR25:
+		case MMC_TIMING_UHS_SDR50:
+		case MMC_TIMING_UHS_SDR104:
+		case MMC_TIMING_UHS_DDR50:
+		case MMC_TIMING_MMC_HS200:
+			/* _sdhost_enable_hispd(host->ioaddr); */
+			_sdhost_set_uhs_mode(host->ioaddr, ios->timing -
+				MMC_TIMING_UHS_SDR12 + __TIMING_MODE_SDR12);
+			break;
+		default:
+			break;
+		}
+		/* 3 open SD clock */
+		_sdhost_sd_clk_on(host->ioaddr);
+		host->ios.timing = ios->timing;
+	}
+
+	mdelay(100);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+}
+
+int sdhost_get_ro(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+	/*read & write */
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+	return 0;
+}
+
+int sdhost_get_cd(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int gpio_cd;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (host->mmc->caps & MMC_CAP_NONREMOVABLE) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		return 1;
+	}
+
+	gpio_cd = mmc_gpio_get_cd(host->mmc);
+	if (IS_ERR_VALUE(gpio_cd))
+		gpio_cd = 1;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+	return !!gpio_cd;
+}
+
+int sdhost_card_busy(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u32 present_state;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Check whether DAT[3:0] is 0000 */
+	present_state = _sdhost_readl(host->ioaddr, SDHOST_32_PRES_STATE);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+	return !(present_state & _DAT_LVL_MASK);
+}
+
+void sdhost_hw_reset(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* close LDO and open LDO again. */
+	signal_voltage_on_off(host, 0);
+	if (mmc->supply.vmmc)
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
+	mdelay(50);
+	if (mmc->supply.vmmc)
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc,
+				      host->ios.vdd);
+
+	signal_voltage_on_off(host, 1);
+	mdelay(50);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+}
+
+const struct mmc_host_ops sdhost_ops = {
+	.request = sdhost_request,
+	.set_ios = sdhost_set_ios,
+	.get_ro = sdhost_get_ro,
+	.get_cd = sdhost_get_cd,
+
+	.start_signal_voltage_switch = sdhost_set_vqmmc,
+	.card_busy = sdhost_card_busy,
+	.hw_reset = sdhost_hw_reset,
+};
+
+void get_caps_info(struct sdhost_host *host, struct sdhost_caps_data *pdata)
+{
+	host->device_name = pdata->name;
+	host->ocr_avail = pdata->ocr_avail;
+	host->caps = pdata->caps;
+	host->caps2 = pdata->caps2;
+	host->pm_caps = pdata->pm_caps;
+	host->base_clk = pdata->base_clk;
+	host->signal_default_voltage = pdata->signal_default_voltage;
+}
+
+int get_basic_resource(struct platform_device *pdev, struct sdhost_host *host)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	uint32_t sdhost_delay[3];
+	struct sdhost_caps_data *pdata;
+	const struct of_device_id *of_id;
+	int ret;
+
+	of_id = of_match_node(sdhost_of_match, np);
+	if (!of_id) {
+		dev_err(&pdev->dev, "failed to match node\n");
+		return -ENODEV;
+	}
+	pdata = (struct sdhost_caps_data *)of_id->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	host->ioaddr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	host->mapbase = res->start;
+	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq < 0)
+		return host->irq;
+
+#if 0
+	host->clk = of_clk_get(np, 0);
+	if (IS_ERR_OR_NULL(host->clk))
+		return PTR_ERR(host->clk);
+
+	host->clk_parent = of_clk_get(np, 1);
+	if (IS_ERR_OR_NULL(host->clk_parent))
+		return PTR_ERR(host->clk_parent);
+#endif
+
+	get_caps_info(host, pdata);
+	host->detect_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+	if (!gpio_is_valid(host->detect_gpio))
+		host->detect_gpio = -1;
+
+	ret = of_property_read_u32_array(np, "sprd,delay", sdhost_delay, 3);
+	if (!ret) {
+		host->write_delay = sdhost_delay[0];
+		host->read_pos_delay = sdhost_delay[1];
+		host->read_neg_delay = sdhost_delay[2];
+	} else
+		dev_err(&pdev->dev, "can not read the property of sprd delay\n");
+
+	return 0;
+}
+
+int get_external_resource(struct sdhost_host *host)
+{
+	int err;
+	struct mmc_host *mmc = host->mmc;
+
+	host->dma_mask = DMA_BIT_MASK(64);
+	host->data_time_out_val = 0;
+
+	/* 1 LDO */
+	mmc_regulator_get_supply(mmc);
+	if (IS_ERR_OR_NULL(mmc->supply.vmmc)) {
+		pr_err("%s(%s): no vmmc regulator found\n",
+		       __func__, host->device_name);
+		mmc->supply.vmmc = NULL;
+	}
+	if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) {
+		pr_err("%s(%s): no vqmmc regulator found\n",
+		       __func__, host->device_name);
+		mmc->supply.vqmmc = NULL;
+	} else {
+		regulator_is_supported_voltage(mmc->supply.vqmmc,
+			host->signal_default_voltage,
+			host->signal_default_voltage);
+		regulator_set_voltage(mmc->supply.vqmmc,
+			host->signal_default_voltage,
+			host->signal_default_voltage);
+	}
+	host->mmc = mmc;
+
+#if 0
+	/* 2 clock */
+	clk_set_parent(host->clk, host->clk_parent);
+	clk_prepare_enable(host->clk);
+#endif
+	/* 3 reset sdio */
+	_reset_ios(host);
+	err = devm_request_irq(&host->pdev->dev, host->irq, _irq_func,
+			       IRQF_SHARED, mmc_hostname(host->mmc), host);
+	if (err)
+		return err;
+	tasklet_init(&host->finish_tasklet, _tasklet_func, (unsigned long)host);
+	/* 4 init timer */
+	setup_timer(&host->timer, _timeout_func, (unsigned long)host);
+
+	return 0;
+}
+
+int set_mmc_struct(struct sdhost_host *host, struct mmc_host *mmc)
+{
+	int ret = 0;
+
+	mmc = host->mmc;
+	mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+	mmc->ops = &sdhost_ops;
+	mmc->f_max = host->base_clk;
+	mmc->f_min = (unsigned int)(host->base_clk / __CLK_MAX_DIV);
+	mmc->max_busy_timeout = (1 << 27) / (host->base_clk / 1000);
+
+	mmc->caps = host->caps;
+	mmc->caps2 = host->caps2;
+	mmc->pm_caps = host->pm_caps;
+	mmc->pm_flags = host->pm_caps;
+	mmc->ocr_avail = host->ocr_avail;
+	mmc->ocr_avail_sdio = host->ocr_avail;
+	mmc->ocr_avail_sd = host->ocr_avail;
+	mmc->ocr_avail_mmc = host->ocr_avail;
+	mmc->max_current_330 = SDHOST_MAX_CUR;
+	mmc->max_current_300 = SDHOST_MAX_CUR;
+	mmc->max_current_180 = SDHOST_MAX_CUR;
+
+	mmc->max_segs = 1;
+	mmc->max_req_size = 524288;	/* 512k */
+	mmc->max_seg_size = mmc->max_req_size;
+
+	mmc->max_blk_size = 512;
+	mmc->max_blk_count = 65535;
+
+	ret = mmc_of_parse(mmc);
+	if (ret) {
+		mmc_free_host(mmc);
+		pr_info("parse sprd %s controller fail\n", host->device_name);
+		return ret;
+	}
+
+	pr_info("%s(%s): ocr avail = 0x%x\n"
+		"base clock = %u, pm_caps = 0x%x\n"
+		"caps: 0x%x, caps2: 0x%x\n",
+		__func__, host->device_name, mmc->ocr_avail,
+		host->base_clk, host->pm_caps, mmc->caps, mmc->caps2);
+
+	return ret;
+}
+
+int sdhost_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct sdhost_host *host;
+	int ret;
+
+	/* globe resource */
+	mmc = mmc_alloc_host(sizeof(struct sdhost_host), &pdev->dev);
+	if (!mmc) {
+		dev_err(&pdev->dev, "no memory for MMC host\n");
+		return -ENOMEM;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->pdev = pdev;
+	spin_lock_init(&host->lock);
+	platform_set_drvdata(pdev, host);
+
+	/* get sdio irq and sdio iomem */
+	ret = get_basic_resource(pdev, host);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to get basic resource: %d\n", ret);
+		return ret;
+	}
+
+	ret = get_external_resource(host);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to get external resource: %d\n", ret);
+		return ret;
+	}
+
+	ret = set_mmc_struct(host, mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to set mmc struct: %d\n", ret);
+		return ret;
+	}
+
+	pm_runtime_setting(pdev, host);
+
+	/*add host */
+	mmiowb();
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret);
+		mmc_free_host(mmc);
+	}
+
+	if (-1 != host->detect_gpio)
+		mmc_gpio_request_cd(mmc, host->detect_gpio, 0);
+
+	sdhost_add_debugfs(host);
+
+	dev_info(&pdev->dev,
+		 "Spreadtrum %s host controller at 0x%08lx irq %d\n",
+		 host->device_name, host->mapbase, host->irq);
+
+	return ret;
+}
+
+void sdhost_shutdown(struct platform_device *pdev)
+{
+}
+
+const struct dev_pm_ops sdhost_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(_pm_suspend, _pm_resume)
+	SET_RUNTIME_PM_OPS(_runtime_suspend,
+			       _runtime_resume, _runtime_idle)
+};
+
+MODULE_DEVICE_TABLE(of, sdhost_of_match);
+
+struct platform_driver sdhost_driver = {
+	.probe = sdhost_probe,
+	.shutdown = sdhost_shutdown,
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .pm = &sdhost_dev_pm_ops,
+		   .name = DRIVER_NAME,
+		   .of_match_table = of_match_ptr(sdhost_of_match),
+		   },
+};
+
+module_platform_driver(sdhost_driver);
+
+MODULE_DESCRIPTION("Spreadtrum sdio host controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sprd_sdhost.h b/drivers/mmc/host/sprd_sdhost.h
new file mode 100644
index 0000000..5778b6d
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost.h
@@ -0,0 +1,507 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef __SDHOST_H_
+#define __SDHOST_H_
+
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/scatterlist.h>
+#include <linux/types.h>
+
+/* Controller flag */
+#define SDHOST_FLAG_EN_ACMD12	1
+#define SDHOST_FLAG_EN_ACMD23	1
+#define SDHOST_FLAG_USE_ADMA	1
+
+/* Controller registers */
+static inline void _sdhost_writeb(void __iomem *ioadr, uint8_t val, int reg)
+{
+		writeb_relaxed(val, ioadr + reg);
+}
+static inline void _sdhost_writew(void __iomem *ioadr, uint16_t val, int reg)
+{
+		writew_relaxed(val, ioadr + reg);
+}
+static inline void _sdhost_writel(void __iomem *ioadr, uint32_t val, int reg)
+{
+		writel_relaxed(val, ioadr + reg);
+}
+static inline uint8_t _sdhost_readb(void __iomem *ioadr, int reg)
+{
+		return readb_relaxed(ioadr + reg);
+}
+static inline uint16_t _sdhost_readw(void __iomem *ioadr, int reg)
+{
+		return readw_relaxed(ioadr + reg);
+}
+static inline uint32_t _sdhost_readl(void __iomem *ioadr, int reg)
+{
+		return readl_relaxed(ioadr + reg);
+}
+#define SDHOST_32_SYS_ADDR	0x00
+/* used in cmd23 with ADMA in sdio 3.0 */
+#define SDHOST_32_BLK_CNT	0x00
+#define SDHOST_16_BLK_CNT	0x06
+
+static inline void _sdhost_set_16_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
+{
+	writew_relaxed((blk_cnt & 0xFFFF), ioadr + SDHOST_16_BLK_CNT);
+}
+
+static inline void _sdhost_set_32_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
+{
+	writel_relaxed((blk_cnt & 0xFFFFFFFF), ioadr + SDHOST_32_BLK_CNT);
+}
+
+#define SDHOST_16_BLK_SIZE	0x04
+
+static inline void _sdhost_set_blk_size(void __iomem *ioadr, uint32_t blk_size)
+{
+	writew_relaxed((blk_size & 0xFFF) | 0x7000, ioadr + SDHOST_16_BLK_SIZE);
+}
+
+#define SDHOST_32_ARG			0x08
+#define SDHOST_16_TR_MODE		0x0C
+#define __ACMD_DIS	0x00
+#define __ACMD12	0x01
+#define __ACMD23	0x02
+static inline void _sdhost_set_trans_mode(
+				void __iomem *io_addr, int if_multi,
+				int if_read, uint16_t auto_cmd,
+				int if_blk_cnt, int if_dma)
+{
+	writew_relaxed(
+		(((if_multi ? 1 : 0) << 5) |
+		((if_read ? 1 : 0) << 4) |
+		(((u16)auto_cmd) << 2) |
+		((if_blk_cnt ? 1 : 0) << 1) |
+		((if_dma ? 1 : 0) << 0)) ,
+		io_addr + SDHOST_16_TR_MODE);
+}
+
+#define SDHOST_16_CMD			0x0E
+#define _CMD_INDEX_CHK			0x0010
+#define _CMD_CRC_CHK			0x0008
+#define _CMD_RSP_NONE			0x0000
+#define _CMD_RSP_136			0x0001
+#define _CMD_RSP_48				0x0002
+#define _CMD_RSP_48_BUSY		0x0003
+#define _RSP0			0
+#define _RSP1_5_6_7	\
+		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48)
+#define _RSP2 \
+		(_CMD_CRC_CHK | _CMD_RSP_136)
+#define _RSP3_4	\
+		_CMD_RSP_48
+#define _RSP1B_5B \
+		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48_BUSY)
+
+static inline void _sdhost_set_cmd(
+				void __iomem *ioadr, u32 cmd,
+				int if_has_data, u32 rsp_type)
+{
+	writew_relaxed(
+		((((u16)(cmd)) << 8) |
+		(((if_has_data) ? 1 : 0) << 5) |
+		((u16)(rsp_type))),
+		(ioadr) + SDHOST_16_CMD);
+}
+
+#define SDHOST_32_TR_MODE_AND_CMD		0x0C
+
+static inline void _sdhost_set_trans_and_cmd(
+				void __iomem *ioadr, int if_multi,
+				int if_read, uint16_t auto_cmd,
+				int if_blk_cnt, int if_dma, u32 cmd,
+				int if_has_data, u32 rsp_type)
+{
+	writel_relaxed(
+		((((if_multi) ? 1 : 0) << 5) |
+		(((if_read) ? 1 : 0) << 4) |
+		(((u32)(auto_cmd)) << 2) |
+		(((if_blk_cnt) ? 1 : 0) << 1) |
+		(((if_dma) ? 1 : 0) << 0) |
+		(((u32)(cmd)) << 24) |
+		(((if_has_data) ? 1 : 0) << 21) |
+		(((u32)(rsp_type)) << 16)) ,
+		ioadr + SDHOST_32_TR_MODE_AND_CMD);
+}
+
+#define SDHOST_32_RESP	0x10
+#define SDHOST_32_PRES_STATE	0x24
+#define  _DAT_LVL_MASK		0x00F00000
+#define SDHOST_8_HOST_CTRL	0x28
+#define __8_BIT_MOD		0x20
+#define __4_BIT_MOD		0x02
+#define __1_BIT_MOD	0x00
+#define __SDMA_MOD		0x00
+#define __32_ADMA_MOD	0x10
+#define __64_ADMA_MOD	0x18
+#define __HISPD_MOD		0x04
+
+static inline void _sdhost_set_buswidth(void __iomem *ioadr, uint32_t buswidth)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl &= (~(__8_BIT_MOD | __4_BIT_MOD | __1_BIT_MOD));
+	switch (buswidth) {
+	case MMC_BUS_WIDTH_1:
+		ctrl |= __1_BIT_MOD;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl |= __4_BIT_MOD;
+		break;
+	case MMC_BUS_WIDTH_8:
+		ctrl |= __8_BIT_MOD;
+		break;
+	default:
+		BUG_ON(1);
+		break;
+	}
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+static inline void _sdhost_set_dma(void __iomem *ioadr, u8 dmaMod)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl &= (~(__SDMA_MOD | __32_ADMA_MOD | __64_ADMA_MOD));
+	ctrl |= dmaMod;
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+static inline void _sdhost_enable_hispd(void __iomem *ioadr)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl |= __HISPD_MOD;
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+/*#define SDHOST_8_PWR_CTRL     0x29    */ /* not used */
+#define SDHOST_8_BLK_GAP		0x2A	/* not used */
+#define SDHOST_8_WACKUP_CTRL	0x2B	/* not used */
+#define SDHOST_16_CLOCK_CTRL	0x2C
+#define __CLK_IN_EN		0x0001
+#define __CLK_IN_STABLE	0x0002
+#define __CLK_SD			0x0004
+#define __CLK_MAX_DIV		2046
+
+static inline void _sdhost_all_clk_off(void __iomem *ioadr)
+{
+	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline void _sdhost_sd_clk_off(void __iomem *ioadr)
+{
+	u16 ctrl = 0;
+
+	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl &= (~__CLK_SD);
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline void _sdhost_sd_clk_on(void __iomem *ioadr)
+{
+	u16 ctrl = 0;
+
+	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl |= __CLK_SD;
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline uint32_t _sdhost_calc_div(uint32_t base_clk, uint32_t clk)
+{
+	uint32_t N;
+
+	if (base_clk <= clk)
+		return 0;
+
+	N = (uint32_t) (base_clk / clk);
+	N = (N >> 1);
+	if (N)
+		N--;
+	if ((base_clk / ((N + 1) << 1)) > clk)
+		N++;
+	if (__CLK_MAX_DIV < N)
+		N = __CLK_MAX_DIV;
+	return N;
+}
+
+static inline void _sdhost_clk_set_and_on(void __iomem *ioadr, uint32_t div)
+{
+	u16 ctrl = 0;
+
+	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl |= (uint16_t) (((div & 0x300) >> 2) | ((div & 0xFF) << 8));
+	ctrl |= __CLK_IN_EN;
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+	while (!(__CLK_IN_STABLE & readw_relaxed(ioadr +
+						SDHOST_16_CLOCK_CTRL)))
+		;
+}
+
+#define SDHOST_8_TIMEOUT		0x2E
+#define __TIMEOUT_MAX_VAL		0xe
+static inline uint8_t _sdhost_calc_timeout(uint32_t base_clk,
+						uint32_t div, uint32_t seconds)
+{
+	uint32_t sd_clk = seconds * (base_clk / ((div + 1) << 1));
+	uint8_t i;
+
+	for (i = 0; i < 15; i++) {
+		if ((((uint32_t) 1) << (16 + i)) > sd_clk) {
+			if (0 != i)
+				i--;
+			break;
+		}
+	}
+	return i;
+}
+
+#define SDHOST_8_RESET			0x2F
+#define  _RST_ALL		0x01
+#define  _RST_CMD		0x02
+#define  _RST_DATA		0x04
+#define  _RST_EMMC		0x08	/*spredtrum define it byself */
+
+static inline void _sdhost_reset(void __iomem *ioadr, uint8_t mask)
+{
+	writeb_relaxed((_RST_EMMC | mask), ioadr + SDHOST_8_RESET);
+	while (_sdhost_readb(ioadr, SDHOST_8_RESET) & mask)
+		;
+}
+
+/* spredtrum define it byself */
+static inline void _sdhost_reset_emmc(void __iomem *ioadr)
+{
+	writeb_relaxed(0, ioadr + SDHOST_8_RESET);
+	mdelay(2);
+	writeb_relaxed(_RST_EMMC, ioadr + SDHOST_8_RESET);
+}
+
+#define SDHOST_32_INT_STATUS		0x30
+#define SDHOST_32_INT_STATUS_EN	0x34
+#define SDHOST_32_INT_SIGNAL_EN	0x38
+#define _INT_CMD_END		0x00000001
+#define _INT_TRAN_END		0x00000002
+#define _INT_DMA_END		0x00000008
+#define _INT_WR_RDY			0x00000010	/*not used */
+#define _INT_RD_RDY			0x00000020	/* not used */
+#define _INT_ERR				0x00008000
+#define _INT_ERR_CMD_TIMEOUT	0x00010000
+#define _INT_ERR_CMD_CRC		0x00020000
+#define _INT_ERR_CMD_END		0x00040000
+#define _INT_ERR_CMD_INDEX	0x00080000
+#define _INT_ERR_DATA_TIMEOUT	0x00100000
+#define _INT_ERR_DATA_CRC		0x00200000
+#define _INT_ERR_DATA_END		0x00400000
+#define _INT_ERR_CUR_LIMIT		0x00800000
+#define _INT_ERR_ACMD			0x01000000
+#define _INT_ERR_ADMA			0x02000000
+
+/* used in irq */
+#define _INT_FILTER_ERR_CMD \
+		(_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX)
+#define _INT_FILTER_ERR_DATA \
+		(_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
+		_INT_ERR_DATA_END)
+#define _INT_FILTER_ERR \
+		(_INT_ERR | _INT_FILTER_ERR_CMD | \
+		_INT_FILTER_ERR_DATA | _INT_ERR_ACMD | \
+		_INT_ERR_ADMA)
+#define _INT_FILTER_NORMAL \
+		(_INT_CMD_END | _INT_TRAN_END)
+
+/* used for setting */
+#define _DATA_FILTER_RD_SIGLE \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC | _INT_ERR_DATA_END)
+#define _DATA_FILTER_RD_MULTI \
+		(_INT_TRAN_END | _INT_DMA_END | _INT_ERR | \
+		_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
+		_INT_ERR_DATA_END)
+#define _DATA_FILTER_WR_SIGLE \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC)
+#define _DATA_FILTER_WR_MULT \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC)
+#define _CMD_FILTER_R0 \
+		(_INT_CMD_END)
+#define _CMD_FILTER_R2 \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END)
+#define _CMD_FILTER_R3 \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_END)
+#define _CMD_FILTER_R1_R4_R5_R6_R7 \
+		(_INT_CMD_END | _INT_ERR | _INT_ERR_CMD_TIMEOUT | \
+		_INT_ERR_CMD_CRC | _INT_ERR_CMD_END | \
+		_INT_ERR_CMD_INDEX)
+#define _CMD_FILTER_R1B \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX | \
+		_INT_TRAN_END | _INT_ERR_DATA_TIMEOUT)
+
+
+static inline void _sdhost_disable_all_int(void __iomem *ioadr)
+{
+	writel_relaxed(0x0, ioadr + SDHOST_32_INT_SIGNAL_EN);
+	writel_relaxed(0x0, ioadr + SDHOST_32_INT_STATUS_EN);
+	writel_relaxed(0xFFFFFFFF, ioadr + SDHOST_32_INT_STATUS);
+}
+
+static inline void _sdhost_enable_int(void __iomem *ioadr, u32 mask)
+{
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS_EN);
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_SIGNAL_EN);
+}
+
+static inline void _sdhost_clear_int(void __iomem *ioadr, u32 mask)
+{
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS);
+}
+
+#define SDHOST_16_ACMD_ERR		0x3C
+
+#define SDHOST_16_HOST_CTRL_2		0x3E
+#define __TIMING_MODE_SDR12		0x0000
+#define __TIMING_MODE_SDR25		0x0001
+#define __TIMING_MODE_SDR50		0x0002
+#define __TIMING_MODE_SDR104	0x0003
+#define __TIMING_MODE_DDR50	0x0004
+#define __TIMING_MODE_SDR200	0x0005
+
+static inline void _sdhost_set_uhs_mode(void __iomem *ioadr, uint16_t mode)
+{
+	writew_relaxed(mode, ioadr +  SDHOST_16_HOST_CTRL_2);
+}
+
+#define SDHOST_MAX_CUR	1020
+
+/* following register is defined by spreadtrum self.
+ * It is not standard register of SDIO.
+ */
+static inline void _sdhost_set_delay(
+				void __iomem *ioadr, uint32_t write_delay,
+				uint32_t read_pos_delay,
+				uint32_t read_neg_delay)
+{
+	writel_relaxed(write_delay, ioadr + 0x80);
+	writel_relaxed(read_pos_delay, ioadr + 0x84);
+	writel_relaxed(read_neg_delay, ioadr + 0x88);
+}
+
+#define SDHOST_32_CAPS	0x40
+#define  __TIMEOUT_CLK_MASK	0x0000003F
+#define  __TIMEOUT_CLK_SHIFT 0
+#define  __TIMEOUT_CLK_UNIT	0x00000080
+#define  __CLOCK_BASE_MASK	0x00003F00
+#define  __CLOCK_V3_BASE_MASK	0x0000FF00
+#define  __CLOCK_BASE_SHIFT	8
+#define  __MAX_BLOCK_MASK	0x00030000
+#define  __MAX_BLOCK_SHIFT  16
+#define  __CAN_DO_8BIT	0x00040000
+#define  __CAN_DO_ADMA2	0x00080000
+#define  __CAN_DO_ADMA1	0x00100000
+#define  __CAN_DO_HISPD	0x00200000
+#define  __CAN_DO_SDMA	0x00400000
+#define  __CAN_VDD_330	0x01000000
+#define  __CAN_VDD_300	0x02000000
+#define  __CAN_VDD_180	0x04000000
+#define  __CAN_64BIT	0x10000000
+
+#define SDHOST_32_CAPS2	0x44
+#define  __SUPPORT_SDR50	0x00000001
+#define  __SUPPORT_SDR104	0x00000002
+#define  __SUPPORT_DDR50	0x00000004
+#define  __DRIVER_TYPE_A	0x00000010
+#define  __DRIVER_TYPE_C	0x00000020
+#define  __DRIVER_TYPE_D	0x00000040
+#define  __RETUNING_TIMER_COUNT_MASK	0x00000F00
+#define  __RETUNING_TIMER_COUNT_SHIFT	8
+#define  __USE_SDR50_TUNING			0x00002000
+#define  __RETUNING_MODE_MASK		0x0000C000
+#define  __RETUNING_MODE_SHIFT		14
+#define  __CLOCK_MUL_MASK	0x00FF0000
+#define  __CLOCK_MUL_SHIFT	16
+
+
+/**********************************************************\
+ *
+ * Controller block structure
+ *
+\**********************************************************/
+struct sdhost_host {
+	/* --globe resource--- */
+	spinlock_t lock;
+	struct mmc_host *mmc;
+
+	/*--basic resource-- */
+	void __iomem *ioaddr;
+	int irq;
+	const char *device_name;
+	struct platform_device *pdev;
+	unsigned long mapbase;
+
+	int detect_gpio;
+	uint32_t ocr_avail;
+	char *clk_name;
+	char *clk_parent_name;
+	uint32_t base_clk;
+	uint32_t caps;
+	uint32_t caps2;
+	uint32_t pm_caps;
+	uint32_t write_delay;
+	uint32_t read_pos_delay;
+	uint32_t read_neg_delay;
+
+	/* --extern resource getted by base resource-- */
+	uint64_t dma_mask;
+	uint8_t data_time_out_val;
+	uint32_t signal_default_voltage;
+	bool sdio_1_8v_signal_enabled;
+	struct clk *clk;
+	struct clk *clk_parent;
+	struct tasklet_struct finish_tasklet;
+	struct timer_list timer;
+
+	/* --runtime param-- */
+	uint32_t int_filter;
+	struct mmc_ios ios;
+	struct mmc_request *mrq;	/* Current request */
+	struct mmc_command *cmd;	/* Current command */
+	uint16_t auto_cmd_mode;
+
+	/*--debugfs-- */
+	struct dentry *debugfs_root;
+};
+
+#endif /* __SDHOST_H_ */
diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.c b/drivers/mmc/host/sprd_sdhost_debugfs.c
new file mode 100644
index 0000000..bc04aea
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost_debugfs.c
@@ -0,0 +1,213 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost_debugfs.c - Secure Digital Host
+ * Controller Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+
+#include "sprd_sdhost_debugfs.h"
+
+#define ELEMENT(v) {v, #v}
+#define ELEMENT_NUM	26
+struct {
+	uint32_t bit;
+	char *caps_name;
+} caps_info[3][ELEMENT_NUM] = {
+	{
+		ELEMENT(MMC_CAP_4_BIT_DATA),
+		ELEMENT(MMC_CAP_MMC_HIGHSPEED),
+		ELEMENT(MMC_CAP_SD_HIGHSPEED),
+		ELEMENT(MMC_CAP_SDIO_IRQ),
+		ELEMENT(MMC_CAP_SPI),
+		ELEMENT(MMC_CAP_NEEDS_POLL),
+		ELEMENT(MMC_CAP_8_BIT_DATA),
+		ELEMENT(MMC_CAP_AGGRESSIVE_PM),
+		ELEMENT(MMC_CAP_NONREMOVABLE),
+		ELEMENT(MMC_CAP_WAIT_WHILE_BUSY),
+		ELEMENT(MMC_CAP_ERASE),
+		ELEMENT(MMC_CAP_1_8V_DDR),
+		ELEMENT(MMC_CAP_1_2V_DDR),
+		ELEMENT(MMC_CAP_POWER_OFF_CARD),
+		ELEMENT(MMC_CAP_BUS_WIDTH_TEST),
+		ELEMENT(MMC_CAP_UHS_SDR12),
+		ELEMENT(MMC_CAP_UHS_SDR25),
+		ELEMENT(MMC_CAP_UHS_SDR50),
+		ELEMENT(MMC_CAP_UHS_SDR104),
+		ELEMENT(MMC_CAP_UHS_DDR50),
+		ELEMENT(MMC_CAP_RUNTIME_RESUME),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_A),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_C),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_D),
+		ELEMENT(MMC_CAP_CMD23),
+		ELEMENT(MMC_CAP_HW_RESET)
+	}, {
+		ELEMENT(MMC_CAP2_BOOTPART_NOACC),
+		ELEMENT(MMC_CAP2_FULL_PWR_CYCLE),
+		ELEMENT(MMC_CAP2_HS200_1_8V_SDR),
+		ELEMENT(MMC_CAP2_HS200_1_2V_SDR),
+		ELEMENT(MMC_CAP2_HS200),
+		ELEMENT(MMC_CAP2_HC_ERASE_SZ),
+		ELEMENT(MMC_CAP2_CD_ACTIVE_HIGH),
+		ELEMENT(MMC_CAP2_RO_ACTIVE_HIGH),
+		ELEMENT(MMC_CAP2_PACKED_RD),
+		ELEMENT(MMC_CAP2_PACKED_WR),
+		ELEMENT(MMC_CAP2_PACKED_CMD),
+		ELEMENT(MMC_CAP2_NO_PRESCAN_POWERUP),
+		ELEMENT(MMC_CAP2_HS400_1_8V),
+		ELEMENT(MMC_CAP2_HS400_1_2V),
+		ELEMENT(MMC_CAP2_HS400),
+		ELEMENT(MMC_CAP2_SDIO_IRQ_NOTHREAD)
+	}, {
+		ELEMENT(MMC_PM_KEEP_POWER),
+		ELEMENT(MMC_PM_WAKE_SDIO_IRQ),
+		ELEMENT(MMC_PM_IGNORE_PM_NOTIFY)
+	}
+
+};
+
+static int sdhost_param_show(struct seq_file *s, void *data)
+{
+	struct sdhost_host *host = s->private;
+	uint32_t i;
+
+	seq_printf(s, "\n"
+		   "ioaddr\t= 0x%p\n"
+		   "irq\t= %d\n"
+		   "device_name\t= %s\n"
+		   "detect_gpio\t= %d\n"
+		   "base_clk\t= %d\n"
+		   "write_delay\t= %d\n"
+		   "read_pos_delay\t= %d\n"
+		   "read_neg_delay\t= %d\n",
+		   host->ioaddr, host->irq, host->device_name,
+		   host->detect_gpio, host->base_clk,
+		   host->write_delay, host->read_pos_delay,
+		   host->read_neg_delay);
+	seq_printf(s, "OCR 0x%x\n", host->ocr_avail);
+
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[0][i].bit ==
+			(host->caps & caps_info[0][i].bit))
+					&& caps_info[0][i].bit)
+			seq_printf(s, "caps:%s\n", caps_info[0][i].caps_name);
+	}
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[1][i].bit ==
+			(host->caps2 & caps_info[1][i].bit))
+						&& caps_info[1][i].bit)
+			seq_printf(s, "caps2:%s\n", caps_info[1][i].caps_name);
+	}
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[2][i].bit ==
+				(host->pm_caps & caps_info[2][i].bit))
+							&& caps_info[2][i].bit)
+			seq_printf(s, "pm_caps:%s\n",
+					caps_info[2][i].caps_name);
+	}
+
+	return 0;
+}
+
+static int sdhost_param_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sdhost_param_show, inode->i_private);
+}
+
+static const struct file_operations sdhost_param_fops = {
+	.open = sdhost_param_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+#define SDHOST_ATTR(PARAM_NAME)	\
+	static int sdhost_##PARAM_NAME##_get(void *data, u64 *val)\
+	{ \
+		struct sdhost_host *host = data;\
+		*val = (u64)host->PARAM_NAME;\
+		return 0;\
+	} \
+	static int sdhost_##PARAM_NAME##_set(void *data, u64 val)\
+	{ \
+		struct sdhost_host *host = data;\
+		if (0x7F >= (uint32_t)val) { \
+			host->PARAM_NAME = (uint32_t)val;\
+			_sdhost_set_delay(host->ioaddr, \
+							host->write_delay, \
+							host->read_pos_delay, \
+							host->read_neg_delay);\
+		} \
+		return 0;\
+	} \
+	DEFINE_SIMPLE_ATTRIBUTE(sdhost_##PARAM_NAME##_fops,\
+						sdhost_##PARAM_NAME##_get,\
+						sdhost_##PARAM_NAME##_set,\
+						"%llu\n")
+
+SDHOST_ATTR(write_delay);
+SDHOST_ATTR(read_pos_delay);
+SDHOST_ATTR(read_neg_delay);
+
+void sdhost_add_debugfs(struct sdhost_host *host)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(host->device_name, NULL);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		return;
+
+	host->debugfs_root = root;
+
+	if (!debugfs_create_file("basic_resource", S_IRUSR, root,
+				(void *)host, &sdhost_param_fops))
+		goto err;
+	if (!debugfs_create_file("write_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_write_delay_fops))
+		goto err;
+	if (!debugfs_create_file("read_pos_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_read_pos_delay_fops))
+		goto err;
+	if (!debugfs_create_file("read_neg_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_read_neg_delay_fops))
+		goto err;
+	return;
+
+err:
+	debugfs_remove_recursive(root);
+	host->debugfs_root = 0;
+}
+
+void dump_sdio_reg(struct sdhost_host *host)
+{
+	unsigned int i;
+
+	if (!host->mmc->card)
+		return;
+
+	pr_info("sdhost" ": =========== REGISTER DUMP (%s)========\n",
+		host->device_name);
+
+	for (i = 0; i < 0x09; i++) {
+		pr_info("sdhost" ": 0x%08x | 0x%08x | 0x%08x | 0x%08x\n\r",
+		       _sdhost_readl(host->ioaddr, 0 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 4 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 8 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 12 + (i << 4))
+		    );
+	}
+
+	pr_info("sdhost" ": ==================================\n");
+	mdelay(100);
+}
diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.h b/drivers/mmc/host/sprd_sdhost_debugfs.h
new file mode 100644
index 0000000..0063e1b
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost_debugfs.h
@@ -0,0 +1,27 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost_debugfs.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef _SDHOST_DEBUGFS_H_
+#define _SDHOST_DEBUGFS_H_
+
+#include "sprd_sdhost.h"
+
+#ifdef CONFIG_DEBUG_FS
+void sdhost_add_debugfs(struct sdhost_host *host);
+void dump_sdio_reg(struct sdhost_host *host);
+#else
+static inline void sdhost_add_debugfs(struct sdhost_host *host) {}
+static inline void dump_sdio_reg(struct sdhost_host *host) {}
+#endif
+
+#endif
-- 
1.7.9.5

[RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Chunyan Zhang]

From: Billows Wu <billows.wu@spreadtrum.com>

The Spreadtrum MMC host driver is used to support EMMC, SD, and
SDIO types of memory cards.

Signed-off-by: Billows Wu <billows.wu@spreadtrum.com>
Reviewed-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
 drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
 drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
 drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
 6 files changed, 2027 insertions(+)
 create mode 100644 drivers/mmc/host/sprd_sdhost.c
 create mode 100644 drivers/mmc/host/sprd_sdhost.h
 create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
 create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h

diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
new file mode 100644
index 0000000..e7a66e8
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost.c
@@ -0,0 +1,1270 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+
+#include "sprd_sdhost.h"
+#include "sprd_sdhost_debugfs.h"
+
+#define DRIVER_NAME "sdhost"
+#define SDHOST_CAPS \
+		(MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
+		MMC_CAP_ERASE |	 MMC_CAP_UHS_SDR50 | \
+		MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
+
+struct sdhost_caps_data {
+	char *name;
+	uint32_t ocr_avail;
+	uint32_t caps;
+	uint32_t caps2;
+	uint32_t pm_caps;
+	/* TODO: we will obtain these values from regulator and clock
+	 * phandles after LDO and clock function is OK
+	 */
+	uint32_t base_clk;
+	uint32_t signal_default_voltage;
+};
+
+struct sdhost_caps_data sd_caps_info = {
+	.name = "sd",
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
+	.caps = SDHOST_CAPS,
+	.caps2 = MMC_CAP2_HC_ERASE_SZ,
+	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
+	.base_clk = 192000000,
+	.signal_default_voltage = 3000000,
+};
+
+struct sdhost_caps_data wifi_caps_info = {
+	.name = "wifi",
+	.ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
+	    MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,
+	.pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
+	.base_clk = 76000000,
+};
+
+struct sdhost_caps_data emmc_caps_info = {
+	.name = "emmc",
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
+	.caps = SDHOST_CAPS |
+	    MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
+	    MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
+	.caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
+	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
+	.base_clk = 192000000,
+	.signal_default_voltage = 1800000,
+};
+
+const struct of_device_id sdhost_of_match[] = {
+	{.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
+	{.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
+	{.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
+	{ /* sentinel */ }
+};
+
+void _reset_ios(struct sdhost_host *host)
+{
+	_sdhost_disable_all_int(host->ioaddr);
+
+	host->ios.clock = 0;
+	host->ios.vdd = 0;
+	/* host->ios.bus_mode    = MMC_BUSMODE_OPENDRAIN; */
+	/* host->ios.chip_select = MMC_CS_DONTCARE; */
+	host->ios.power_mode = MMC_POWER_OFF;
+	host->ios.bus_width = MMC_BUS_WIDTH_1;
+	host->ios.timing = MMC_TIMING_LEGACY;
+	host->ios.signal_voltage = MMC_SIGNAL_VOLTAGE_330;
+	/*host->ios.drv_type    = MMC_SET_DRIVER_TYPE_B; */
+
+	_sdhost_reset(host->ioaddr, _RST_ALL);
+	_sdhost_set_delay(host->ioaddr, host->write_delay,
+			  host->read_pos_delay, host->read_neg_delay);
+}
+
+int __local_pm_suspend(struct sdhost_host *host)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	_sdhost_disable_all_int(host->ioaddr);
+	_sdhost_all_clk_off(host->ioaddr);
+	clk_disable(host->clk);
+	/* wake lock */
+	spin_unlock_irqrestore(&host->lock, flags);
+	clk_unprepare(host->clk);
+	synchronize_irq(host->irq);
+
+	return 0;
+}
+
+int __local_pm_resume(struct sdhost_host *host)
+{
+	unsigned long flags;
+
+	clk_prepare(host->clk);
+	spin_lock_irqsave(&host->lock, flags);
+	clk_enable(host->clk);
+	if (host->ios.clock) {
+		_sdhost_sd_clk_off(host->ioaddr);
+		_sdhost_clk_set_and_on(host->ioaddr,
+				       _sdhost_calc_div(host->base_clk,
+							host->ios.clock));
+		_sdhost_sd_clk_on(host->ioaddr);
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return 0;
+}
+
+void pm_runtime_setting(struct platform_device *pdev, struct sdhost_host *host)
+{
+	pm_runtime_set_active(&pdev->dev);
+#ifdef CONFIG_PM_RUNTIME
+	pm_suspend_ignore_children(&pdev->dev, true);
+#endif
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+}
+
+int _runtime_get(struct sdhost_host *host)
+{
+	return pm_runtime_get_sync(host->mmc->parent);
+}
+
+int _runtime_put(struct sdhost_host *host)
+{
+	pm_runtime_mark_last_busy(host->mmc->parent);
+	return pm_runtime_put_autosuspend(host->mmc->parent);
+}
+
+int _runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	return __local_pm_suspend(host);
+}
+
+int _runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	return __local_pm_resume(host);
+}
+
+int _runtime_idle(struct device *dev)
+{
+	return 0;
+}
+
+int _pm_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	_runtime_get(host);
+
+	host->mmc->pm_flags = host->mmc->pm_caps;
+
+	pr_debug("%s(%s):\n"
+		 "sdhost clock = %d\n"
+		 "sdhost vdd = %d\n"
+		 "sdhost bus_mode = %d\n"
+		 "sdhost chip_select = %d\n"
+		 "sdhost power_mode = %d\n"
+		 "sdhost bus_width = %d\n"
+		 "sdhost timing = %d\n"
+		 "sdhost signal_voltage = %d\n"
+		 "sdhost drv_type = %d\n",
+		 __func__, host->device_name,
+		 host->ios.clock,
+		 host->ios.vdd,
+		 host->ios.bus_mode,
+		 host->ios.chip_select,
+		 host->ios.power_mode,
+		 host->ios.bus_width,
+		 host->ios.timing,
+		 host->ios.signal_voltage, host->ios.drv_type);
+
+	return __local_pm_suspend(host);
+}
+
+int _pm_resume(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+	struct mmc_ios ios;
+
+	__local_pm_resume(host);
+
+	ios = host->mmc->ios;
+	_reset_ios(host);
+	host->mmc->ops->set_ios(host->mmc, &ios);
+
+	pr_debug("%s(%s):\n"
+		 "sdhost clock = %d\n"
+		 "sdhost vdd = %d\n"
+		 "sdhost bus_mode = %d\n"
+		 "sdhost chip_select = %d\n"
+		 "sdhost power_mode = %d\n"
+		 "sdhost bus_width = %d\n"
+		 "sdhost timing = %d\n"
+		 "sdhost signal_voltage = %d\n"
+		 "sdhost drv_type = %d\n",
+		 __func__, host->device_name,
+		 host->ios.clock,
+		 host->ios.vdd,
+		 host->ios.bus_mode,
+		 host->ios.chip_select,
+		 host->ios.power_mode,
+		 host->ios.bus_width,
+		 host->ios.timing,
+		 host->ios.signal_voltage, host->ios.drv_type);
+
+	_runtime_put(host);
+
+	return 0;
+}
+
+void __get_rsp(struct sdhost_host *host)
+{
+	u32 i, offset;
+	unsigned int flags = host->cmd->flags;
+	u32 *resp = host->cmd->resp;
+	void __iomem *addr = host->ioaddr;
+
+	if (!(flags & MMC_RSP_PRESENT))
+		return;
+
+	if (flags & MMC_RSP_136) {
+		/* CRC is stripped so we need to do some shifting. */
+		for (i = 0, offset = 12; i < 3; i++, offset -= 4) {
+			resp[i] =
+			    _sdhost_readl(addr, SDHOST_32_RESP + offset) << 8;
+			resp[i] |=
+			    _sdhost_readb(addr, SDHOST_32_RESP + offset - 1);
+		}
+		resp[3] = _sdhost_readl(addr, SDHOST_32_RESP) << 8;
+	} else {
+		resp[0] = _sdhost_readl(addr, SDHOST_32_RESP);
+	}
+}
+
+void _send_cmd(struct sdhost_host *host, struct mmc_command *cmd)
+{
+	struct mmc_data *data = cmd->data;
+	int sg_cnt;
+	u32 flag = 0;
+	u16 rsp_type = 0;
+	int if_has_data = 0;
+	int if_multi = 0;
+	int if_rd = 0;
+	int if_dma = 0;
+	uint16_t auto_cmd = __ACMD_DIS;
+
+	pr_debug("sdhost %s cmd %d, arg 0x%x, flag 0x%x\n",
+		 host->device_name, cmd->opcode, cmd->arg, cmd->flags);
+	if (cmd->data)
+		pr_debug("sdhost %s block size %d, cnt %d\n",
+			 host->device_name, cmd->data->blksz,
+			 cmd->data->blocks);
+
+	_sdhost_disable_all_int(host->ioaddr);
+
+	if (38 == cmd->opcode) {
+		/* if it is erase command , it's busy time will long,
+		 * so we set long timeout value here.
+		 */
+		mod_timer(&host->timer, jiffies + 10 * HZ);
+		_sdhost_writeb(host->ioaddr, __TIMEOUT_MAX_VAL,
+			       SDHOST_8_TIMEOUT);
+	} else {
+		mod_timer(&host->timer, jiffies + 3 * HZ);
+		_sdhost_writeb(host->ioaddr, host->data_time_out_val,
+			       SDHOST_8_TIMEOUT);
+	}
+
+	host->cmd = cmd;
+	if (data) {
+		/* set data param */
+		WARN_ON((data->blksz * data->blocks > 524288) ||
+		       (data->blksz > host->mmc->max_blk_size) ||
+		       (data->blocks > 65535));
+
+		data->bytes_xfered = 0;
+
+		if_has_data = 1;
+		if_rd = (data->flags & MMC_DATA_READ);
+		if_multi = (mmc_op_multi(cmd->opcode) || data->blocks > 1);
+		if (if_rd && !if_multi)
+			flag = _DATA_FILTER_RD_SIGLE;
+		else if (if_rd && if_multi)
+			flag = _DATA_FILTER_RD_MULTI;
+		else if (!if_rd && !if_multi)
+			flag = _DATA_FILTER_WR_SIGLE;
+		else
+			flag = _DATA_FILTER_WR_MULT;
+
+		if (!host->auto_cmd_mode)
+			flag |= _INT_ERR_ACMD;
+
+		if_dma = 1;
+		auto_cmd = host->auto_cmd_mode;
+		_sdhost_set_blk_size(host->ioaddr, data->blksz);
+
+		sg_cnt = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+				    (data->flags & MMC_DATA_READ) ?
+				    DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		if (1 == sg_cnt) {
+			_sdhost_set_dma(host->ioaddr, __SDMA_MOD);
+			_sdhost_set_16_blk_cnt(host->ioaddr, data->blocks);
+			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
+				       SDHOST_32_SYS_ADDR);
+		} else {
+			WARN_ON(1);
+			flag |= _INT_ERR_ADMA;
+			_sdhost_set_dma(host->ioaddr, __32_ADMA_MOD);
+			_sdhost_set_32_blk_cnt(host->ioaddr, data->blocks);
+			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
+				       SDHOST_32_SYS_ADDR);
+		}
+	} else {
+		/* _sdhost_set_trans_mode(host->ioaddr,
+		 * 0, 0, __ACMD_DIS, 0, 0);
+		 */
+	}
+
+	_sdhost_writel(host->ioaddr, cmd->arg, SDHOST_32_ARG);
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1B:
+		rsp_type = _RSP1B_5B;
+		flag |= _CMD_FILTER_R1B;
+		break;
+	case MMC_RSP_NONE:
+		rsp_type = _RSP0;
+		flag |= _CMD_FILTER_R0;
+		break;
+	case MMC_RSP_R2:
+		rsp_type = _RSP2;
+		flag |= _CMD_FILTER_R2;
+		break;
+
+	case MMC_RSP_R4:
+		rsp_type = _RSP3_4;
+		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
+		break;
+
+	case MMC_RSP_R1:
+	case MMC_RSP_R1 & ~MMC_RSP_CRC:
+		rsp_type = _RSP1_5_6_7;
+		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
+		break;
+
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	host->int_filter = flag;
+	_sdhost_enable_int(host->ioaddr, flag);
+	pr_debug("sdhost %s cmd:%d rsp:%d intflag:0x%x\n"
+		 "if_multi:0x%x if_rd:0x%x auto_cmd:0x%x if_dma:0x%x\n",
+		 host->device_name, cmd->opcode, mmc_resp_type(cmd),
+		 flag, if_multi, if_rd, auto_cmd, if_dma);
+	_sdhost_set_trans_and_cmd(host->ioaddr, if_multi, if_rd, auto_cmd,
+		if_multi, if_dma, cmd->opcode, if_has_data, rsp_type);
+}
+
+void _cmd_irq(struct sdhost_host *host, u32 intmask)
+{
+	if (0 == intmask) {
+		WARN_ON(1);
+		return;
+	}
+
+	if (!host->cmd) {
+		pr_err("%s: got command interrupt 0x%08x even though no command operation was in process\n",
+		     host->device_name, (unsigned)intmask);
+		return;
+	}
+
+	if (_INT_ERR_CMD_TIMEOUT & intmask)
+		host->cmd->error = -ETIMEDOUT;
+	else if ((_INT_ERR_CMD_CRC | _INT_ERR_CMD_END |
+		  _INT_ERR_CMD_INDEX) & intmask)
+		host->cmd->error = -EILSEQ;
+}
+
+void _data_irq(struct sdhost_host *host, u32 intmask)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	if (data) {
+		/* current error is happened in data token */
+		if (_INT_ERR_DATA_TIMEOUT & intmask)
+			data->error = -ETIMEDOUT;
+		else
+			data->error = -EILSEQ;
+	} else {
+		/* current error is happend in response with busy */
+		if (_INT_ERR_DATA_TIMEOUT & intmask)
+			cmd->error = -ETIMEDOUT;
+		else
+			cmd->error = -EILSEQ;
+	}
+}
+
+void _trans_end_irq(struct sdhost_host *host, u32 intmask)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	if (data) {
+		dma_unmap_sg(mmc_dev(host->mmc),
+			     data->sg, data->sg_len,
+			     (data->flags & MMC_DATA_READ) ?
+			     DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		data->error = 0;
+		data->bytes_xfered = data->blksz * data->blocks;
+	} else {
+		/* R1B also can produce transferComplete interrupt */
+		cmd->error = 0;
+	}
+}
+
+int _err_irq_handle(struct sdhost_host *host, u32 intmask)
+{
+	int ret = 1;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	/* some error happened in command */
+	_cmd_irq(host, intmask & _INT_FILTER_ERR);
+	if (_INT_FILTER_ERR_DATA & intmask)
+		/* some error happened in data token or command with R1B */
+		_data_irq(host, intmask);
+
+	if (_INT_ERR_ACMD & intmask)
+		/* Auto cmd12 and cmd23 error is belong to data token error */
+		data->error = -EILSEQ;
+
+	if (_INT_ERR_ADMA & intmask)
+		data->error = -EIO;
+
+	/* for debug */
+	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
+	dump_sdio_reg(host);
+	_sdhost_disable_all_int(host->ioaddr);
+
+	/* if current error happened in data token we send cmd12 to stop it*/
+	if ((mrq->cmd == cmd) && (mrq->stop)) {
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		_send_cmd(host, mrq->stop);
+	} else {
+		/* request finish with error, so reset it
+		 * and stop the request
+		 */
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		tasklet_schedule(&host->finish_tasklet);
+	}
+
+	return ret;
+}
+
+int _normal_irq_handle(struct sdhost_host *host, u32 intmask)
+{
+	int ret = 0;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+
+	/* delete irq that wanted in filter */
+	/* _sdhost_clear_int(host->ioaddr,
+	 *_INT_FILTER_NORMAL & intmask);
+	 */
+	host->int_filter &= ~(_INT_FILTER_NORMAL & intmask);
+	if (_INT_DMA_END & intmask)
+		_sdhost_writel(host->ioaddr,
+			_sdhost_readl(host->ioaddr,
+				SDHOST_32_SYS_ADDR),
+				SDHOST_32_SYS_ADDR);
+
+	if (_INT_CMD_END & intmask) {
+		cmd->error = 0;
+		__get_rsp(host);
+	}
+	if (_INT_TRAN_END & intmask)
+		_trans_end_irq(host, intmask);
+	if (!(_INT_FILTER_NORMAL & host->int_filter)) {
+		/* current cmd finished */
+		_sdhost_disable_all_int(host->ioaddr);
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		if (mrq->sbc == cmd) {
+			_send_cmd(host, mrq->cmd);
+		} else if ((mrq->cmd == host->cmd)
+			&& (mrq->stop)) {
+				_send_cmd(host, mrq->stop);
+		} else {
+			/* finish with success and stop the
+			 * request
+			 */
+			tasklet_schedule(&host->finish_tasklet);
+			ret = 1;
+		}
+	}
+
+	return ret;
+}
+
+irqreturn_t _irq_func(int irq, void *param)
+{
+	u32 intmask;
+	struct sdhost_host *host = (struct sdhost_host *)param;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data;
+
+	spin_lock(&host->lock);
+	/* maybe _timeout_func run in one core and _irq_func run in
+	 * another core, this will panic if access cmd->data
+	 */
+	if ((!mrq) || (!cmd)) {
+		spin_unlock(&host->lock);
+		return IRQ_NONE;
+	}
+	data = cmd->data;
+
+	intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
+	if (!intmask) {
+		spin_unlock(&host->lock);
+		return IRQ_NONE;
+	}
+	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
+
+	/* disable unused interrupt */
+	_sdhost_clear_int(host->ioaddr, intmask);
+	/* just care about the interrupt that we want */
+	intmask &= host->int_filter;
+
+	while (intmask) {
+		int ret;
+
+		if (_INT_FILTER_ERR & intmask) {
+			ret = _err_irq_handle(host, intmask);
+			if (ret)
+				goto out;
+		} else {
+			ret = _normal_irq_handle(host, intmask);
+			if (ret)
+				goto out;
+		}
+
+		intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
+		_sdhost_clear_int(host->ioaddr, intmask);
+		intmask &= host->int_filter;
+	};
+
+out:
+	spin_unlock(&host->lock);
+	return IRQ_HANDLED;
+}
+
+void _tasklet_func(unsigned long param)
+{
+	struct sdhost_host *host = (struct sdhost_host *)param;
+	unsigned long flags;
+	struct mmc_request *mrq;
+
+	del_timer(&host->timer);
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (!host->mrq) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+	mrq = host->mrq;
+	host->mrq = NULL;
+	host->cmd = NULL;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	pr_debug("sdhost %s cmd %d data %d\n",
+		 host->device_name, mrq->cmd->error,
+		 ((!!mrq->cmd->data) ? mrq->cmd->data->error : 0));
+	mmc_request_done(host->mmc, mrq);
+	_runtime_put(host);
+}
+
+void _timeout_func(unsigned long data)
+{
+	struct sdhost_host *host = (struct sdhost_host *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (host->mrq) {
+		pr_info("sdhost %s Timeout waiting for hardware interrupt!\n",
+			host->device_name);
+		dump_sdio_reg(host);
+		if (host->cmd->data)
+			host->cmd->data->error = -ETIMEDOUT;
+		else if (host->cmd)
+			host->cmd->error = -ETIMEDOUT;
+		else
+			host->mrq->cmd->error = -ETIMEDOUT;
+
+		_sdhost_disable_all_int(host->ioaddr);
+		_sdhost_reset(host->ioaddr, _RST_CMD | _RST_DATA);
+		tasklet_schedule(&host->finish_tasklet);
+	}
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	host->mrq = mrq;
+	/* 1 find whether card is still in slot */
+	if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE)) {
+		if (!mmc_gpio_get_cd(host->mmc)) {
+			mrq->cmd->error = -ENOMEDIUM;
+			tasklet_schedule(&host->finish_tasklet);
+			mmiowb();
+			spin_unlock_irqrestore(&host->lock, flags);
+			return;
+		}
+		/* else asume sdcard is present */
+	}
+
+	/*
+	 * in our control we can not use auto cmd12 and auto cmd23 together
+	 * so in following program we use auto cmd23 prior to auto cmd12
+	 */
+	pr_debug("sdhost %s request %d %d %d\n",
+		 host->device_name, !!mrq->sbc, !!mrq->cmd, !!mrq->stop);
+	host->auto_cmd_mode = __ACMD_DIS;
+	if (!mrq->sbc && mrq->stop && SDHOST_FLAG_EN_ACMD12) {
+		host->auto_cmd_mode = __ACMD12;
+		mrq->data->stop = NULL;
+		mrq->stop = NULL;
+	}
+
+	/* 3 send cmd list */
+	if ((mrq->sbc) && SDHOST_FLAG_EN_ACMD23) {
+		host->auto_cmd_mode = __ACMD23;
+		_send_cmd(host, mrq->cmd);
+	} else if (mrq->sbc)
+		_send_cmd(host, mrq->sbc);
+	else
+		_send_cmd(host, mrq->cmd);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void signal_voltage_on_off(struct sdhost_host *host, uint32_t on_off)
+{
+	if (!host->mmc->supply.vqmmc) {
+		pr_err("%s(%s) there is no signal voltage!\n",
+		       __func__, host->device_name);
+		return;
+	}
+
+	if (on_off && (!host->sdio_1_8v_signal_enabled)) {
+		if (!regulator_enable(host->mmc->supply.vqmmc) &&
+			regulator_is_enabled(host->mmc->supply.vqmmc)) {
+			host->sdio_1_8v_signal_enabled = true;
+			pr_info("%s(%s) signal voltage enable success!\n",
+					__func__, host->device_name);
+		} else
+			pr_err("%s(%s) signal voltage enable fail!\n",
+				__func__, host->device_name);
+
+	} else if (!on_off && host->sdio_1_8v_signal_enabled) {
+		if (!regulator_disable(host->mmc->supply.vqmmc) &&
+			!regulator_is_enabled(host->mmc->supply.vqmmc)) {
+			host->sdio_1_8v_signal_enabled = false;
+			pr_info("%s(%s) signal voltage disable success!\n",
+				__func__, host->device_name);
+		} else
+			pr_err("%s(%s) signal voltage disable fail\n",
+				__func__, host->device_name);
+	}
+}
+
+/*
+ * 1 This votage is always poweron
+ * 2 initial votage is 2.7v~3.6v
+ * 3 It can be reconfig to 1.7v~1.95v
+ */
+int sdhost_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int err;
+
+	pr_debug("%s(%s) vqmmc:\n"
+		 "sdhost clock = %d-->%d\n"
+		 "sdhost vdd = %d-->%d\n"
+		 "sdhost bus_mode = %d-->%d\n"
+		 "sdhost chip_select = %d-->%d\n"
+		 "sdhost power_mode = %d-->%d\n"
+		 "sdhost bus_width = %d-->%d\n"
+		 "sdhost timing = %d-->%d\n"
+		 "sdhost signal_voltage = %d-->%d\n"
+		 "sdhost drv_type = %d-->%d\n",
+		 __func__, host->device_name,
+		 host->ios.clock, ios->clock,
+		 host->ios.vdd, ios->vdd,
+		 host->ios.bus_mode, ios->bus_mode,
+		 host->ios.chip_select, ios->chip_select,
+		 host->ios.power_mode, ios->power_mode,
+		 host->ios.bus_width, ios->bus_width,
+		 host->ios.timing, ios->timing,
+		 host->ios.signal_voltage, ios->signal_voltage,
+		 host->ios.drv_type, ios->drv_type);
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (!mmc->supply.vqmmc) {
+		/* there are no 1.8v signal votage. */
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		/* err = -EINVAL; */
+		err = 0;
+		pr_err("sdhost %s There is no signalling voltage\n",
+		       host->device_name);
+		return err;
+	}
+
+	/* I/O power supply */
+	if (ios->signal_voltage == host->ios.signal_voltage) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		return 0;
+	}
+
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    3000000, 3000000);
+		break;
+	case MMC_SIGNAL_VOLTAGE_180:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    1800000, 1800000);
+		break;
+	case MMC_SIGNAL_VOLTAGE_120:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    1100000, 1300000);
+		break;
+	default:
+		err = -EIO;
+		break;
+	}
+	if (likely(!err))
+		host->ios.signal_voltage = ios->signal_voltage;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+	WARN(err, "Switching to signalling voltage  failed\n");
+	return err;
+}
+
+void sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	pr_debug("%s(%s) ios:\n"
+		 "sdhost clock = %d-->%d\n"
+		 "sdhost vdd = %d-->%d\n"
+		 "sdhost bus_mode = %d-->%d\n"
+		 "sdhost chip_select = %d-->%d\n"
+		 "sdhost power_mode = %d-->%d\n"
+		 "sdhost bus_width = %d-->%d\n"
+		 "sdhost timing = %d-->%d\n"
+		 "sdhost signal_voltage = %d-->%d\n"
+		 "sdhost drv_type = %d-->%d\n",
+		 __func__, host->device_name,
+		 host->ios.clock, ios->clock,
+		 host->ios.vdd, ios->vdd,
+		 host->ios.bus_mode, ios->bus_mode,
+		 host->ios.chip_select, ios->chip_select,
+		 host->ios.power_mode, ios->power_mode,
+		 host->ios.bus_width, ios->bus_width,
+		 host->ios.timing, ios->timing,
+		 host->ios.signal_voltage, ios->signal_voltage,
+		 host->ios.drv_type, ios->drv_type);
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+	dump_sdio_reg(host);
+
+	if (0 == ios->clock) {
+		_sdhost_all_clk_off(host->ioaddr);
+		host->ios.clock = 0;
+	} else if (ios->clock != host->ios.clock) {
+		uint32_t div;
+
+		div = _sdhost_calc_div(host->base_clk, ios->clock);
+		_sdhost_sd_clk_off(host->ioaddr);
+		_sdhost_clk_set_and_on(host->ioaddr, div);
+		_sdhost_sd_clk_on(host->ioaddr);
+		host->ios.clock = ios->clock;
+		host->data_time_out_val =
+			_sdhost_calc_timeout(host->base_clk, div, 3);
+	}
+
+	if (ios->power_mode != host->ios.power_mode) {
+		switch (ios->power_mode) {
+		case MMC_POWER_OFF:
+			signal_voltage_on_off(host, 0);
+			if (mmc->supply.vmmc)
+				mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, 0);
+			_reset_ios(host);
+			host->ios.power_mode = ios->power_mode;
+			break;
+		case MMC_POWER_ON:
+		case MMC_POWER_UP:
+			if (mmc->supply.vmmc)
+				mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, ios->vdd);
+			signal_voltage_on_off(host, 1);
+			host->ios.power_mode = ios->power_mode;
+			host->ios.vdd = ios->vdd;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* flash power voltage select */
+	if (ios->vdd != host->ios.vdd) {
+		if (mmc->supply.vmmc) {
+			pr_info("sdhost %s 3.0 %d!\n",
+				host->device_name, ios->vdd);
+			mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, ios->vdd);
+		}
+		host->ios.vdd = ios->vdd;
+	}
+
+	if (ios->bus_width != host->ios.bus_width) {
+		_sdhost_set_buswidth(host->ioaddr, ios->bus_width);
+		host->ios.bus_width = ios->bus_width;
+	}
+
+	if (ios->timing != host->ios.timing) {
+		/* 1 first close SD clock */
+		_sdhost_sd_clk_off(host->ioaddr);
+		/* 2 set timing mode */
+		switch (ios->timing) {	/* timing specification used */
+		case MMC_TIMING_LEGACY:
+			/*basic clock mode */
+			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
+			break;
+		case MMC_TIMING_MMC_HS:
+		case MMC_TIMING_SD_HS:
+			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
+			break;
+		case MMC_TIMING_UHS_SDR12:
+		case MMC_TIMING_UHS_SDR25:
+		case MMC_TIMING_UHS_SDR50:
+		case MMC_TIMING_UHS_SDR104:
+		case MMC_TIMING_UHS_DDR50:
+		case MMC_TIMING_MMC_HS200:
+			/* _sdhost_enable_hispd(host->ioaddr); */
+			_sdhost_set_uhs_mode(host->ioaddr, ios->timing -
+				MMC_TIMING_UHS_SDR12 + __TIMING_MODE_SDR12);
+			break;
+		default:
+			break;
+		}
+		/* 3 open SD clock */
+		_sdhost_sd_clk_on(host->ioaddr);
+		host->ios.timing = ios->timing;
+	}
+
+	mdelay(100);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+}
+
+int sdhost_get_ro(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+	/*read & write */
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+	return 0;
+}
+
+int sdhost_get_cd(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int gpio_cd;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (host->mmc->caps & MMC_CAP_NONREMOVABLE) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		return 1;
+	}
+
+	gpio_cd = mmc_gpio_get_cd(host->mmc);
+	if (IS_ERR_VALUE(gpio_cd))
+		gpio_cd = 1;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+	return !!gpio_cd;
+}
+
+int sdhost_card_busy(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u32 present_state;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Check whether DAT[3:0] is 0000 */
+	present_state = _sdhost_readl(host->ioaddr, SDHOST_32_PRES_STATE);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+	return !(present_state & _DAT_LVL_MASK);
+}
+
+void sdhost_hw_reset(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* close LDO and open LDO again. */
+	signal_voltage_on_off(host, 0);
+	if (mmc->supply.vmmc)
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
+	mdelay(50);
+	if (mmc->supply.vmmc)
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc,
+				      host->ios.vdd);
+
+	signal_voltage_on_off(host, 1);
+	mdelay(50);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+}
+
+const struct mmc_host_ops sdhost_ops = {
+	.request = sdhost_request,
+	.set_ios = sdhost_set_ios,
+	.get_ro = sdhost_get_ro,
+	.get_cd = sdhost_get_cd,
+
+	.start_signal_voltage_switch = sdhost_set_vqmmc,
+	.card_busy = sdhost_card_busy,
+	.hw_reset = sdhost_hw_reset,
+};
+
+void get_caps_info(struct sdhost_host *host, struct sdhost_caps_data *pdata)
+{
+	host->device_name = pdata->name;
+	host->ocr_avail = pdata->ocr_avail;
+	host->caps = pdata->caps;
+	host->caps2 = pdata->caps2;
+	host->pm_caps = pdata->pm_caps;
+	host->base_clk = pdata->base_clk;
+	host->signal_default_voltage = pdata->signal_default_voltage;
+}
+
+int get_basic_resource(struct platform_device *pdev, struct sdhost_host *host)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	uint32_t sdhost_delay[3];
+	struct sdhost_caps_data *pdata;
+	const struct of_device_id *of_id;
+	int ret;
+
+	of_id = of_match_node(sdhost_of_match, np);
+	if (!of_id) {
+		dev_err(&pdev->dev, "failed to match node\n");
+		return -ENODEV;
+	}
+	pdata = (struct sdhost_caps_data *)of_id->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	host->ioaddr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	host->mapbase = res->start;
+	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq < 0)
+		return host->irq;
+
+#if 0
+	host->clk = of_clk_get(np, 0);
+	if (IS_ERR_OR_NULL(host->clk))
+		return PTR_ERR(host->clk);
+
+	host->clk_parent = of_clk_get(np, 1);
+	if (IS_ERR_OR_NULL(host->clk_parent))
+		return PTR_ERR(host->clk_parent);
+#endif
+
+	get_caps_info(host, pdata);
+	host->detect_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+	if (!gpio_is_valid(host->detect_gpio))
+		host->detect_gpio = -1;
+
+	ret = of_property_read_u32_array(np, "sprd,delay", sdhost_delay, 3);
+	if (!ret) {
+		host->write_delay = sdhost_delay[0];
+		host->read_pos_delay = sdhost_delay[1];
+		host->read_neg_delay = sdhost_delay[2];
+	} else
+		dev_err(&pdev->dev, "can not read the property of sprd delay\n");
+
+	return 0;
+}
+
+int get_external_resource(struct sdhost_host *host)
+{
+	int err;
+	struct mmc_host *mmc = host->mmc;
+
+	host->dma_mask = DMA_BIT_MASK(64);
+	host->data_time_out_val = 0;
+
+	/* 1 LDO */
+	mmc_regulator_get_supply(mmc);
+	if (IS_ERR_OR_NULL(mmc->supply.vmmc)) {
+		pr_err("%s(%s): no vmmc regulator found\n",
+		       __func__, host->device_name);
+		mmc->supply.vmmc = NULL;
+	}
+	if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) {
+		pr_err("%s(%s): no vqmmc regulator found\n",
+		       __func__, host->device_name);
+		mmc->supply.vqmmc = NULL;
+	} else {
+		regulator_is_supported_voltage(mmc->supply.vqmmc,
+			host->signal_default_voltage,
+			host->signal_default_voltage);
+		regulator_set_voltage(mmc->supply.vqmmc,
+			host->signal_default_voltage,
+			host->signal_default_voltage);
+	}
+	host->mmc = mmc;
+
+#if 0
+	/* 2 clock */
+	clk_set_parent(host->clk, host->clk_parent);
+	clk_prepare_enable(host->clk);
+#endif
+	/* 3 reset sdio */
+	_reset_ios(host);
+	err = devm_request_irq(&host->pdev->dev, host->irq, _irq_func,
+			       IRQF_SHARED, mmc_hostname(host->mmc), host);
+	if (err)
+		return err;
+	tasklet_init(&host->finish_tasklet, _tasklet_func, (unsigned long)host);
+	/* 4 init timer */
+	setup_timer(&host->timer, _timeout_func, (unsigned long)host);
+
+	return 0;
+}
+
+int set_mmc_struct(struct sdhost_host *host, struct mmc_host *mmc)
+{
+	int ret = 0;
+
+	mmc = host->mmc;
+	mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+	mmc->ops = &sdhost_ops;
+	mmc->f_max = host->base_clk;
+	mmc->f_min = (unsigned int)(host->base_clk / __CLK_MAX_DIV);
+	mmc->max_busy_timeout = (1 << 27) / (host->base_clk / 1000);
+
+	mmc->caps = host->caps;
+	mmc->caps2 = host->caps2;
+	mmc->pm_caps = host->pm_caps;
+	mmc->pm_flags = host->pm_caps;
+	mmc->ocr_avail = host->ocr_avail;
+	mmc->ocr_avail_sdio = host->ocr_avail;
+	mmc->ocr_avail_sd = host->ocr_avail;
+	mmc->ocr_avail_mmc = host->ocr_avail;
+	mmc->max_current_330 = SDHOST_MAX_CUR;
+	mmc->max_current_300 = SDHOST_MAX_CUR;
+	mmc->max_current_180 = SDHOST_MAX_CUR;
+
+	mmc->max_segs = 1;
+	mmc->max_req_size = 524288;	/* 512k */
+	mmc->max_seg_size = mmc->max_req_size;
+
+	mmc->max_blk_size = 512;
+	mmc->max_blk_count = 65535;
+
+	ret = mmc_of_parse(mmc);
+	if (ret) {
+		mmc_free_host(mmc);
+		pr_info("parse sprd %s controller fail\n", host->device_name);
+		return ret;
+	}
+
+	pr_info("%s(%s): ocr avail = 0x%x\n"
+		"base clock = %u, pm_caps = 0x%x\n"
+		"caps: 0x%x, caps2: 0x%x\n",
+		__func__, host->device_name, mmc->ocr_avail,
+		host->base_clk, host->pm_caps, mmc->caps, mmc->caps2);
+
+	return ret;
+}
+
+int sdhost_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct sdhost_host *host;
+	int ret;
+
+	/* globe resource */
+	mmc = mmc_alloc_host(sizeof(struct sdhost_host), &pdev->dev);
+	if (!mmc) {
+		dev_err(&pdev->dev, "no memory for MMC host\n");
+		return -ENOMEM;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->pdev = pdev;
+	spin_lock_init(&host->lock);
+	platform_set_drvdata(pdev, host);
+
+	/* get sdio irq and sdio iomem */
+	ret = get_basic_resource(pdev, host);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to get basic resource: %d\n", ret);
+		return ret;
+	}
+
+	ret = get_external_resource(host);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to get external resource: %d\n", ret);
+		return ret;
+	}
+
+	ret = set_mmc_struct(host, mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to set mmc struct: %d\n", ret);
+		return ret;
+	}
+
+	pm_runtime_setting(pdev, host);
+
+	/*add host */
+	mmiowb();
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret);
+		mmc_free_host(mmc);
+	}
+
+	if (-1 != host->detect_gpio)
+		mmc_gpio_request_cd(mmc, host->detect_gpio, 0);
+
+	sdhost_add_debugfs(host);
+
+	dev_info(&pdev->dev,
+		 "Spreadtrum %s host controller at 0x%08lx irq %d\n",
+		 host->device_name, host->mapbase, host->irq);
+
+	return ret;
+}
+
+void sdhost_shutdown(struct platform_device *pdev)
+{
+}
+
+const struct dev_pm_ops sdhost_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(_pm_suspend, _pm_resume)
+	SET_RUNTIME_PM_OPS(_runtime_suspend,
+			       _runtime_resume, _runtime_idle)
+};
+
+MODULE_DEVICE_TABLE(of, sdhost_of_match);
+
+struct platform_driver sdhost_driver = {
+	.probe = sdhost_probe,
+	.shutdown = sdhost_shutdown,
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .pm = &sdhost_dev_pm_ops,
+		   .name = DRIVER_NAME,
+		   .of_match_table = of_match_ptr(sdhost_of_match),
+		   },
+};
+
+module_platform_driver(sdhost_driver);
+
+MODULE_DESCRIPTION("Spreadtrum sdio host controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sprd_sdhost.h b/drivers/mmc/host/sprd_sdhost.h
new file mode 100644
index 0000000..5778b6d
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost.h
@@ -0,0 +1,507 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef __SDHOST_H_
+#define __SDHOST_H_
+
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/scatterlist.h>
+#include <linux/types.h>
+
+/* Controller flag */
+#define SDHOST_FLAG_EN_ACMD12	1
+#define SDHOST_FLAG_EN_ACMD23	1
+#define SDHOST_FLAG_USE_ADMA	1
+
+/* Controller registers */
+static inline void _sdhost_writeb(void __iomem *ioadr, uint8_t val, int reg)
+{
+		writeb_relaxed(val, ioadr + reg);
+}
+static inline void _sdhost_writew(void __iomem *ioadr, uint16_t val, int reg)
+{
+		writew_relaxed(val, ioadr + reg);
+}
+static inline void _sdhost_writel(void __iomem *ioadr, uint32_t val, int reg)
+{
+		writel_relaxed(val, ioadr + reg);
+}
+static inline uint8_t _sdhost_readb(void __iomem *ioadr, int reg)
+{
+		return readb_relaxed(ioadr + reg);
+}
+static inline uint16_t _sdhost_readw(void __iomem *ioadr, int reg)
+{
+		return readw_relaxed(ioadr + reg);
+}
+static inline uint32_t _sdhost_readl(void __iomem *ioadr, int reg)
+{
+		return readl_relaxed(ioadr + reg);
+}
+#define SDHOST_32_SYS_ADDR	0x00
+/* used in cmd23 with ADMA in sdio 3.0 */
+#define SDHOST_32_BLK_CNT	0x00
+#define SDHOST_16_BLK_CNT	0x06
+
+static inline void _sdhost_set_16_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
+{
+	writew_relaxed((blk_cnt & 0xFFFF), ioadr + SDHOST_16_BLK_CNT);
+}
+
+static inline void _sdhost_set_32_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
+{
+	writel_relaxed((blk_cnt & 0xFFFFFFFF), ioadr + SDHOST_32_BLK_CNT);
+}
+
+#define SDHOST_16_BLK_SIZE	0x04
+
+static inline void _sdhost_set_blk_size(void __iomem *ioadr, uint32_t blk_size)
+{
+	writew_relaxed((blk_size & 0xFFF) | 0x7000, ioadr + SDHOST_16_BLK_SIZE);
+}
+
+#define SDHOST_32_ARG			0x08
+#define SDHOST_16_TR_MODE		0x0C
+#define __ACMD_DIS	0x00
+#define __ACMD12	0x01
+#define __ACMD23	0x02
+static inline void _sdhost_set_trans_mode(
+				void __iomem *io_addr, int if_multi,
+				int if_read, uint16_t auto_cmd,
+				int if_blk_cnt, int if_dma)
+{
+	writew_relaxed(
+		(((if_multi ? 1 : 0) << 5) |
+		((if_read ? 1 : 0) << 4) |
+		(((u16)auto_cmd) << 2) |
+		((if_blk_cnt ? 1 : 0) << 1) |
+		((if_dma ? 1 : 0) << 0)) ,
+		io_addr + SDHOST_16_TR_MODE);
+}
+
+#define SDHOST_16_CMD			0x0E
+#define _CMD_INDEX_CHK			0x0010
+#define _CMD_CRC_CHK			0x0008
+#define _CMD_RSP_NONE			0x0000
+#define _CMD_RSP_136			0x0001
+#define _CMD_RSP_48				0x0002
+#define _CMD_RSP_48_BUSY		0x0003
+#define _RSP0			0
+#define _RSP1_5_6_7	\
+		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48)
+#define _RSP2 \
+		(_CMD_CRC_CHK | _CMD_RSP_136)
+#define _RSP3_4	\
+		_CMD_RSP_48
+#define _RSP1B_5B \
+		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48_BUSY)
+
+static inline void _sdhost_set_cmd(
+				void __iomem *ioadr, u32 cmd,
+				int if_has_data, u32 rsp_type)
+{
+	writew_relaxed(
+		((((u16)(cmd)) << 8) |
+		(((if_has_data) ? 1 : 0) << 5) |
+		((u16)(rsp_type))),
+		(ioadr) + SDHOST_16_CMD);
+}
+
+#define SDHOST_32_TR_MODE_AND_CMD		0x0C
+
+static inline void _sdhost_set_trans_and_cmd(
+				void __iomem *ioadr, int if_multi,
+				int if_read, uint16_t auto_cmd,
+				int if_blk_cnt, int if_dma, u32 cmd,
+				int if_has_data, u32 rsp_type)
+{
+	writel_relaxed(
+		((((if_multi) ? 1 : 0) << 5) |
+		(((if_read) ? 1 : 0) << 4) |
+		(((u32)(auto_cmd)) << 2) |
+		(((if_blk_cnt) ? 1 : 0) << 1) |
+		(((if_dma) ? 1 : 0) << 0) |
+		(((u32)(cmd)) << 24) |
+		(((if_has_data) ? 1 : 0) << 21) |
+		(((u32)(rsp_type)) << 16)) ,
+		ioadr + SDHOST_32_TR_MODE_AND_CMD);
+}
+
+#define SDHOST_32_RESP	0x10
+#define SDHOST_32_PRES_STATE	0x24
+#define  _DAT_LVL_MASK		0x00F00000
+#define SDHOST_8_HOST_CTRL	0x28
+#define __8_BIT_MOD		0x20
+#define __4_BIT_MOD		0x02
+#define __1_BIT_MOD	0x00
+#define __SDMA_MOD		0x00
+#define __32_ADMA_MOD	0x10
+#define __64_ADMA_MOD	0x18
+#define __HISPD_MOD		0x04
+
+static inline void _sdhost_set_buswidth(void __iomem *ioadr, uint32_t buswidth)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl &= (~(__8_BIT_MOD | __4_BIT_MOD | __1_BIT_MOD));
+	switch (buswidth) {
+	case MMC_BUS_WIDTH_1:
+		ctrl |= __1_BIT_MOD;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl |= __4_BIT_MOD;
+		break;
+	case MMC_BUS_WIDTH_8:
+		ctrl |= __8_BIT_MOD;
+		break;
+	default:
+		BUG_ON(1);
+		break;
+	}
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+static inline void _sdhost_set_dma(void __iomem *ioadr, u8 dmaMod)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl &= (~(__SDMA_MOD | __32_ADMA_MOD | __64_ADMA_MOD));
+	ctrl |= dmaMod;
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+static inline void _sdhost_enable_hispd(void __iomem *ioadr)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl |= __HISPD_MOD;
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+/*#define SDHOST_8_PWR_CTRL     0x29    */ /* not used */
+#define SDHOST_8_BLK_GAP		0x2A	/* not used */
+#define SDHOST_8_WACKUP_CTRL	0x2B	/* not used */
+#define SDHOST_16_CLOCK_CTRL	0x2C
+#define __CLK_IN_EN		0x0001
+#define __CLK_IN_STABLE	0x0002
+#define __CLK_SD			0x0004
+#define __CLK_MAX_DIV		2046
+
+static inline void _sdhost_all_clk_off(void __iomem *ioadr)
+{
+	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline void _sdhost_sd_clk_off(void __iomem *ioadr)
+{
+	u16 ctrl = 0;
+
+	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl &= (~__CLK_SD);
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline void _sdhost_sd_clk_on(void __iomem *ioadr)
+{
+	u16 ctrl = 0;
+
+	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl |= __CLK_SD;
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline uint32_t _sdhost_calc_div(uint32_t base_clk, uint32_t clk)
+{
+	uint32_t N;
+
+	if (base_clk <= clk)
+		return 0;
+
+	N = (uint32_t) (base_clk / clk);
+	N = (N >> 1);
+	if (N)
+		N--;
+	if ((base_clk / ((N + 1) << 1)) > clk)
+		N++;
+	if (__CLK_MAX_DIV < N)
+		N = __CLK_MAX_DIV;
+	return N;
+}
+
+static inline void _sdhost_clk_set_and_on(void __iomem *ioadr, uint32_t div)
+{
+	u16 ctrl = 0;
+
+	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl |= (uint16_t) (((div & 0x300) >> 2) | ((div & 0xFF) << 8));
+	ctrl |= __CLK_IN_EN;
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+	while (!(__CLK_IN_STABLE & readw_relaxed(ioadr +
+						SDHOST_16_CLOCK_CTRL)))
+		;
+}
+
+#define SDHOST_8_TIMEOUT		0x2E
+#define __TIMEOUT_MAX_VAL		0xe
+static inline uint8_t _sdhost_calc_timeout(uint32_t base_clk,
+						uint32_t div, uint32_t seconds)
+{
+	uint32_t sd_clk = seconds * (base_clk / ((div + 1) << 1));
+	uint8_t i;
+
+	for (i = 0; i < 15; i++) {
+		if ((((uint32_t) 1) << (16 + i)) > sd_clk) {
+			if (0 != i)
+				i--;
+			break;
+		}
+	}
+	return i;
+}
+
+#define SDHOST_8_RESET			0x2F
+#define  _RST_ALL		0x01
+#define  _RST_CMD		0x02
+#define  _RST_DATA		0x04
+#define  _RST_EMMC		0x08	/*spredtrum define it byself */
+
+static inline void _sdhost_reset(void __iomem *ioadr, uint8_t mask)
+{
+	writeb_relaxed((_RST_EMMC | mask), ioadr + SDHOST_8_RESET);
+	while (_sdhost_readb(ioadr, SDHOST_8_RESET) & mask)
+		;
+}
+
+/* spredtrum define it byself */
+static inline void _sdhost_reset_emmc(void __iomem *ioadr)
+{
+	writeb_relaxed(0, ioadr + SDHOST_8_RESET);
+	mdelay(2);
+	writeb_relaxed(_RST_EMMC, ioadr + SDHOST_8_RESET);
+}
+
+#define SDHOST_32_INT_STATUS		0x30
+#define SDHOST_32_INT_STATUS_EN	0x34
+#define SDHOST_32_INT_SIGNAL_EN	0x38
+#define _INT_CMD_END		0x00000001
+#define _INT_TRAN_END		0x00000002
+#define _INT_DMA_END		0x00000008
+#define _INT_WR_RDY			0x00000010	/*not used */
+#define _INT_RD_RDY			0x00000020	/* not used */
+#define _INT_ERR				0x00008000
+#define _INT_ERR_CMD_TIMEOUT	0x00010000
+#define _INT_ERR_CMD_CRC		0x00020000
+#define _INT_ERR_CMD_END		0x00040000
+#define _INT_ERR_CMD_INDEX	0x00080000
+#define _INT_ERR_DATA_TIMEOUT	0x00100000
+#define _INT_ERR_DATA_CRC		0x00200000
+#define _INT_ERR_DATA_END		0x00400000
+#define _INT_ERR_CUR_LIMIT		0x00800000
+#define _INT_ERR_ACMD			0x01000000
+#define _INT_ERR_ADMA			0x02000000
+
+/* used in irq */
+#define _INT_FILTER_ERR_CMD \
+		(_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX)
+#define _INT_FILTER_ERR_DATA \
+		(_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
+		_INT_ERR_DATA_END)
+#define _INT_FILTER_ERR \
+		(_INT_ERR | _INT_FILTER_ERR_CMD | \
+		_INT_FILTER_ERR_DATA | _INT_ERR_ACMD | \
+		_INT_ERR_ADMA)
+#define _INT_FILTER_NORMAL \
+		(_INT_CMD_END | _INT_TRAN_END)
+
+/* used for setting */
+#define _DATA_FILTER_RD_SIGLE \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC | _INT_ERR_DATA_END)
+#define _DATA_FILTER_RD_MULTI \
+		(_INT_TRAN_END | _INT_DMA_END | _INT_ERR | \
+		_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
+		_INT_ERR_DATA_END)
+#define _DATA_FILTER_WR_SIGLE \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC)
+#define _DATA_FILTER_WR_MULT \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC)
+#define _CMD_FILTER_R0 \
+		(_INT_CMD_END)
+#define _CMD_FILTER_R2 \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END)
+#define _CMD_FILTER_R3 \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_END)
+#define _CMD_FILTER_R1_R4_R5_R6_R7 \
+		(_INT_CMD_END | _INT_ERR | _INT_ERR_CMD_TIMEOUT | \
+		_INT_ERR_CMD_CRC | _INT_ERR_CMD_END | \
+		_INT_ERR_CMD_INDEX)
+#define _CMD_FILTER_R1B \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX | \
+		_INT_TRAN_END | _INT_ERR_DATA_TIMEOUT)
+
+
+static inline void _sdhost_disable_all_int(void __iomem *ioadr)
+{
+	writel_relaxed(0x0, ioadr + SDHOST_32_INT_SIGNAL_EN);
+	writel_relaxed(0x0, ioadr + SDHOST_32_INT_STATUS_EN);
+	writel_relaxed(0xFFFFFFFF, ioadr + SDHOST_32_INT_STATUS);
+}
+
+static inline void _sdhost_enable_int(void __iomem *ioadr, u32 mask)
+{
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS_EN);
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_SIGNAL_EN);
+}
+
+static inline void _sdhost_clear_int(void __iomem *ioadr, u32 mask)
+{
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS);
+}
+
+#define SDHOST_16_ACMD_ERR		0x3C
+
+#define SDHOST_16_HOST_CTRL_2		0x3E
+#define __TIMING_MODE_SDR12		0x0000
+#define __TIMING_MODE_SDR25		0x0001
+#define __TIMING_MODE_SDR50		0x0002
+#define __TIMING_MODE_SDR104	0x0003
+#define __TIMING_MODE_DDR50	0x0004
+#define __TIMING_MODE_SDR200	0x0005
+
+static inline void _sdhost_set_uhs_mode(void __iomem *ioadr, uint16_t mode)
+{
+	writew_relaxed(mode, ioadr +  SDHOST_16_HOST_CTRL_2);
+}
+
+#define SDHOST_MAX_CUR	1020
+
+/* following register is defined by spreadtrum self.
+ * It is not standard register of SDIO.
+ */
+static inline void _sdhost_set_delay(
+				void __iomem *ioadr, uint32_t write_delay,
+				uint32_t read_pos_delay,
+				uint32_t read_neg_delay)
+{
+	writel_relaxed(write_delay, ioadr + 0x80);
+	writel_relaxed(read_pos_delay, ioadr + 0x84);
+	writel_relaxed(read_neg_delay, ioadr + 0x88);
+}
+
+#define SDHOST_32_CAPS	0x40
+#define  __TIMEOUT_CLK_MASK	0x0000003F
+#define  __TIMEOUT_CLK_SHIFT 0
+#define  __TIMEOUT_CLK_UNIT	0x00000080
+#define  __CLOCK_BASE_MASK	0x00003F00
+#define  __CLOCK_V3_BASE_MASK	0x0000FF00
+#define  __CLOCK_BASE_SHIFT	8
+#define  __MAX_BLOCK_MASK	0x00030000
+#define  __MAX_BLOCK_SHIFT  16
+#define  __CAN_DO_8BIT	0x00040000
+#define  __CAN_DO_ADMA2	0x00080000
+#define  __CAN_DO_ADMA1	0x00100000
+#define  __CAN_DO_HISPD	0x00200000
+#define  __CAN_DO_SDMA	0x00400000
+#define  __CAN_VDD_330	0x01000000
+#define  __CAN_VDD_300	0x02000000
+#define  __CAN_VDD_180	0x04000000
+#define  __CAN_64BIT	0x10000000
+
+#define SDHOST_32_CAPS2	0x44
+#define  __SUPPORT_SDR50	0x00000001
+#define  __SUPPORT_SDR104	0x00000002
+#define  __SUPPORT_DDR50	0x00000004
+#define  __DRIVER_TYPE_A	0x00000010
+#define  __DRIVER_TYPE_C	0x00000020
+#define  __DRIVER_TYPE_D	0x00000040
+#define  __RETUNING_TIMER_COUNT_MASK	0x00000F00
+#define  __RETUNING_TIMER_COUNT_SHIFT	8
+#define  __USE_SDR50_TUNING			0x00002000
+#define  __RETUNING_MODE_MASK		0x0000C000
+#define  __RETUNING_MODE_SHIFT		14
+#define  __CLOCK_MUL_MASK	0x00FF0000
+#define  __CLOCK_MUL_SHIFT	16
+
+
+/**********************************************************\
+ *
+ * Controller block structure
+ *
+\**********************************************************/
+struct sdhost_host {
+	/* --globe resource--- */
+	spinlock_t lock;
+	struct mmc_host *mmc;
+
+	/*--basic resource-- */
+	void __iomem *ioaddr;
+	int irq;
+	const char *device_name;
+	struct platform_device *pdev;
+	unsigned long mapbase;
+
+	int detect_gpio;
+	uint32_t ocr_avail;
+	char *clk_name;
+	char *clk_parent_name;
+	uint32_t base_clk;
+	uint32_t caps;
+	uint32_t caps2;
+	uint32_t pm_caps;
+	uint32_t write_delay;
+	uint32_t read_pos_delay;
+	uint32_t read_neg_delay;
+
+	/* --extern resource getted by base resource-- */
+	uint64_t dma_mask;
+	uint8_t data_time_out_val;
+	uint32_t signal_default_voltage;
+	bool sdio_1_8v_signal_enabled;
+	struct clk *clk;
+	struct clk *clk_parent;
+	struct tasklet_struct finish_tasklet;
+	struct timer_list timer;
+
+	/* --runtime param-- */
+	uint32_t int_filter;
+	struct mmc_ios ios;
+	struct mmc_request *mrq;	/* Current request */
+	struct mmc_command *cmd;	/* Current command */
+	uint16_t auto_cmd_mode;
+
+	/*--debugfs-- */
+	struct dentry *debugfs_root;
+};
+
+#endif /* __SDHOST_H_ */
diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.c b/drivers/mmc/host/sprd_sdhost_debugfs.c
new file mode 100644
index 0000000..bc04aea
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost_debugfs.c
@@ -0,0 +1,213 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost_debugfs.c - Secure Digital Host
+ * Controller Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+
+#include "sprd_sdhost_debugfs.h"
+
+#define ELEMENT(v) {v, #v}
+#define ELEMENT_NUM	26
+struct {
+	uint32_t bit;
+	char *caps_name;
+} caps_info[3][ELEMENT_NUM] = {
+	{
+		ELEMENT(MMC_CAP_4_BIT_DATA),
+		ELEMENT(MMC_CAP_MMC_HIGHSPEED),
+		ELEMENT(MMC_CAP_SD_HIGHSPEED),
+		ELEMENT(MMC_CAP_SDIO_IRQ),
+		ELEMENT(MMC_CAP_SPI),
+		ELEMENT(MMC_CAP_NEEDS_POLL),
+		ELEMENT(MMC_CAP_8_BIT_DATA),
+		ELEMENT(MMC_CAP_AGGRESSIVE_PM),
+		ELEMENT(MMC_CAP_NONREMOVABLE),
+		ELEMENT(MMC_CAP_WAIT_WHILE_BUSY),
+		ELEMENT(MMC_CAP_ERASE),
+		ELEMENT(MMC_CAP_1_8V_DDR),
+		ELEMENT(MMC_CAP_1_2V_DDR),
+		ELEMENT(MMC_CAP_POWER_OFF_CARD),
+		ELEMENT(MMC_CAP_BUS_WIDTH_TEST),
+		ELEMENT(MMC_CAP_UHS_SDR12),
+		ELEMENT(MMC_CAP_UHS_SDR25),
+		ELEMENT(MMC_CAP_UHS_SDR50),
+		ELEMENT(MMC_CAP_UHS_SDR104),
+		ELEMENT(MMC_CAP_UHS_DDR50),
+		ELEMENT(MMC_CAP_RUNTIME_RESUME),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_A),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_C),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_D),
+		ELEMENT(MMC_CAP_CMD23),
+		ELEMENT(MMC_CAP_HW_RESET)
+	}, {
+		ELEMENT(MMC_CAP2_BOOTPART_NOACC),
+		ELEMENT(MMC_CAP2_FULL_PWR_CYCLE),
+		ELEMENT(MMC_CAP2_HS200_1_8V_SDR),
+		ELEMENT(MMC_CAP2_HS200_1_2V_SDR),
+		ELEMENT(MMC_CAP2_HS200),
+		ELEMENT(MMC_CAP2_HC_ERASE_SZ),
+		ELEMENT(MMC_CAP2_CD_ACTIVE_HIGH),
+		ELEMENT(MMC_CAP2_RO_ACTIVE_HIGH),
+		ELEMENT(MMC_CAP2_PACKED_RD),
+		ELEMENT(MMC_CAP2_PACKED_WR),
+		ELEMENT(MMC_CAP2_PACKED_CMD),
+		ELEMENT(MMC_CAP2_NO_PRESCAN_POWERUP),
+		ELEMENT(MMC_CAP2_HS400_1_8V),
+		ELEMENT(MMC_CAP2_HS400_1_2V),
+		ELEMENT(MMC_CAP2_HS400),
+		ELEMENT(MMC_CAP2_SDIO_IRQ_NOTHREAD)
+	}, {
+		ELEMENT(MMC_PM_KEEP_POWER),
+		ELEMENT(MMC_PM_WAKE_SDIO_IRQ),
+		ELEMENT(MMC_PM_IGNORE_PM_NOTIFY)
+	}
+
+};
+
+static int sdhost_param_show(struct seq_file *s, void *data)
+{
+	struct sdhost_host *host = s->private;
+	uint32_t i;
+
+	seq_printf(s, "\n"
+		   "ioaddr\t= 0x%p\n"
+		   "irq\t= %d\n"
+		   "device_name\t= %s\n"
+		   "detect_gpio\t= %d\n"
+		   "base_clk\t= %d\n"
+		   "write_delay\t= %d\n"
+		   "read_pos_delay\t= %d\n"
+		   "read_neg_delay\t= %d\n",
+		   host->ioaddr, host->irq, host->device_name,
+		   host->detect_gpio, host->base_clk,
+		   host->write_delay, host->read_pos_delay,
+		   host->read_neg_delay);
+	seq_printf(s, "OCR 0x%x\n", host->ocr_avail);
+
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[0][i].bit ==
+			(host->caps & caps_info[0][i].bit))
+					&& caps_info[0][i].bit)
+			seq_printf(s, "caps:%s\n", caps_info[0][i].caps_name);
+	}
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[1][i].bit ==
+			(host->caps2 & caps_info[1][i].bit))
+						&& caps_info[1][i].bit)
+			seq_printf(s, "caps2:%s\n", caps_info[1][i].caps_name);
+	}
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[2][i].bit ==
+				(host->pm_caps & caps_info[2][i].bit))
+							&& caps_info[2][i].bit)
+			seq_printf(s, "pm_caps:%s\n",
+					caps_info[2][i].caps_name);
+	}
+
+	return 0;
+}
+
+static int sdhost_param_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sdhost_param_show, inode->i_private);
+}
+
+static const struct file_operations sdhost_param_fops = {
+	.open = sdhost_param_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+#define SDHOST_ATTR(PARAM_NAME)	\
+	static int sdhost_##PARAM_NAME##_get(void *data, u64 *val)\
+	{ \
+		struct sdhost_host *host = data;\
+		*val = (u64)host->PARAM_NAME;\
+		return 0;\
+	} \
+	static int sdhost_##PARAM_NAME##_set(void *data, u64 val)\
+	{ \
+		struct sdhost_host *host = data;\
+		if (0x7F >= (uint32_t)val) { \
+			host->PARAM_NAME = (uint32_t)val;\
+			_sdhost_set_delay(host->ioaddr, \
+							host->write_delay, \
+							host->read_pos_delay, \
+							host->read_neg_delay);\
+		} \
+		return 0;\
+	} \
+	DEFINE_SIMPLE_ATTRIBUTE(sdhost_##PARAM_NAME##_fops,\
+						sdhost_##PARAM_NAME##_get,\
+						sdhost_##PARAM_NAME##_set,\
+						"%llu\n")
+
+SDHOST_ATTR(write_delay);
+SDHOST_ATTR(read_pos_delay);
+SDHOST_ATTR(read_neg_delay);
+
+void sdhost_add_debugfs(struct sdhost_host *host)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(host->device_name, NULL);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		return;
+
+	host->debugfs_root = root;
+
+	if (!debugfs_create_file("basic_resource", S_IRUSR, root,
+				(void *)host, &sdhost_param_fops))
+		goto err;
+	if (!debugfs_create_file("write_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_write_delay_fops))
+		goto err;
+	if (!debugfs_create_file("read_pos_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_read_pos_delay_fops))
+		goto err;
+	if (!debugfs_create_file("read_neg_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_read_neg_delay_fops))
+		goto err;
+	return;
+
+err:
+	debugfs_remove_recursive(root);
+	host->debugfs_root = 0;
+}
+
+void dump_sdio_reg(struct sdhost_host *host)
+{
+	unsigned int i;
+
+	if (!host->mmc->card)
+		return;
+
+	pr_info("sdhost" ": =========== REGISTER DUMP (%s)========\n",
+		host->device_name);
+
+	for (i = 0; i < 0x09; i++) {
+		pr_info("sdhost" ": 0x%08x | 0x%08x | 0x%08x | 0x%08x\n\r",
+		       _sdhost_readl(host->ioaddr, 0 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 4 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 8 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 12 + (i << 4))
+		    );
+	}
+
+	pr_info("sdhost" ": ==================================\n");
+	mdelay(100);
+}
diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.h b/drivers/mmc/host/sprd_sdhost_debugfs.h
new file mode 100644
index 0000000..0063e1b
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost_debugfs.h
@@ -0,0 +1,27 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost_debugfs.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef _SDHOST_DEBUGFS_H_
+#define _SDHOST_DEBUGFS_H_
+
+#include "sprd_sdhost.h"
+
+#ifdef CONFIG_DEBUG_FS
+void sdhost_add_debugfs(struct sdhost_host *host);
+void dump_sdio_reg(struct sdhost_host *host);
+#else
+static inline void sdhost_add_debugfs(struct sdhost_host *host) {}
+static inline void dump_sdio_reg(struct sdhost_host *host) {}
+#endif
+
+#endif
-- 
1.7.9.5

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Jaehoon Chung]

Hi, 

Is sdhost based on SDHCI controller?
Why don't use sdhci.c? Is there any reason?

Best Regards,
Jaehoon Chung

On 07/01/2015 04:12 PM, Chunyan Zhang wrote:
> From: Billows Wu <billows.wu-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> 
> The Spreadtrum MMC host driver is used to support EMMC, SD, and
> SDIO types of memory cards.
> 
> Signed-off-by: Billows Wu <billows.wu-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> Reviewed-by: Orson Zhai <orson.zhai-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> Signed-off-by: Chunyan Zhang <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> ---
>  drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
>  drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
>  drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
>  drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
>  6 files changed, 2027 insertions(+)
>  create mode 100644 drivers/mmc/host/sprd_sdhost.c
>  create mode 100644 drivers/mmc/host/sprd_sdhost.h
>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h
> 
> diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
> new file mode 100644
> index 0000000..e7a66e8
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost.c
> @@ -0,0 +1,1270 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
> + * Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/highmem.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/scatterlist.h>
> +
> +#include "sprd_sdhost.h"
> +#include "sprd_sdhost_debugfs.h"
> +
> +#define DRIVER_NAME "sdhost"
> +#define SDHOST_CAPS \
> +		(MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
> +		MMC_CAP_ERASE |	 MMC_CAP_UHS_SDR50 | \
> +		MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
> +
> +struct sdhost_caps_data {
> +	char *name;
> +	uint32_t ocr_avail;
> +	uint32_t caps;
> +	uint32_t caps2;
> +	uint32_t pm_caps;
> +	/* TODO: we will obtain these values from regulator and clock
> +	 * phandles after LDO and clock function is OK
> +	 */
> +	uint32_t base_clk;
> +	uint32_t signal_default_voltage;
> +};
> +
> +struct sdhost_caps_data sd_caps_info = {
> +	.name = "sd",
> +	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
> +	.caps = SDHOST_CAPS,
> +	.caps2 = MMC_CAP2_HC_ERASE_SZ,
> +	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
> +	.base_clk = 192000000,
> +	.signal_default_voltage = 3000000,
> +};
> +
> +struct sdhost_caps_data wifi_caps_info = {
> +	.name = "wifi",
> +	.ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
> +	    MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
> +	.caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,
> +	.pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
> +	.base_clk = 76000000,
> +};
> +
> +struct sdhost_caps_data emmc_caps_info = {
> +	.name = "emmc",
> +	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
> +	.caps = SDHOST_CAPS |
> +	    MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
> +	    MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
> +	.caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
> +	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
> +	.base_clk = 192000000,
> +	.signal_default_voltage = 1800000,
> +};
> +
> +const struct of_device_id sdhost_of_match[] = {
> +	{.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
> +	{.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
> +	{.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
> +	{ /* sentinel */ }
> +};
> +
> +void _reset_ios(struct sdhost_host *host)
> +{
> +	_sdhost_disable_all_int(host->ioaddr);
> +
> +	host->ios.clock = 0;
> +	host->ios.vdd = 0;
> +	/* host->ios.bus_mode    = MMC_BUSMODE_OPENDRAIN; */
> +	/* host->ios.chip_select = MMC_CS_DONTCARE; */
> +	host->ios.power_mode = MMC_POWER_OFF;
> +	host->ios.bus_width = MMC_BUS_WIDTH_1;
> +	host->ios.timing = MMC_TIMING_LEGACY;
> +	host->ios.signal_voltage = MMC_SIGNAL_VOLTAGE_330;
> +	/*host->ios.drv_type    = MMC_SET_DRIVER_TYPE_B; */
> +
> +	_sdhost_reset(host->ioaddr, _RST_ALL);
> +	_sdhost_set_delay(host->ioaddr, host->write_delay,
> +			  host->read_pos_delay, host->read_neg_delay);
> +}
> +
> +int __local_pm_suspend(struct sdhost_host *host)
> +{
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&host->lock, flags);
> +	_sdhost_disable_all_int(host->ioaddr);
> +	_sdhost_all_clk_off(host->ioaddr);
> +	clk_disable(host->clk);
> +	/* wake lock */
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	clk_unprepare(host->clk);
> +	synchronize_irq(host->irq);
> +
> +	return 0;
> +}
> +
> +int __local_pm_resume(struct sdhost_host *host)
> +{
> +	unsigned long flags;
> +
> +	clk_prepare(host->clk);
> +	spin_lock_irqsave(&host->lock, flags);
> +	clk_enable(host->clk);
> +	if (host->ios.clock) {
> +		_sdhost_sd_clk_off(host->ioaddr);
> +		_sdhost_clk_set_and_on(host->ioaddr,
> +				       _sdhost_calc_div(host->base_clk,
> +							host->ios.clock));
> +		_sdhost_sd_clk_on(host->ioaddr);
> +	}
> +	spin_unlock_irqrestore(&host->lock, flags);
> +
> +	return 0;
> +}
> +
> +void pm_runtime_setting(struct platform_device *pdev, struct sdhost_host *host)
> +{
> +	pm_runtime_set_active(&pdev->dev);
> +#ifdef CONFIG_PM_RUNTIME
> +	pm_suspend_ignore_children(&pdev->dev, true);
> +#endif
> +	pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
> +	pm_runtime_use_autosuspend(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +}
> +
> +int _runtime_get(struct sdhost_host *host)
> +{
> +	return pm_runtime_get_sync(host->mmc->parent);
> +}
> +
> +int _runtime_put(struct sdhost_host *host)
> +{
> +	pm_runtime_mark_last_busy(host->mmc->parent);
> +	return pm_runtime_put_autosuspend(host->mmc->parent);
> +}
> +
> +int _runtime_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev =
> +	    container_of(dev, struct platform_device, dev);
> +	struct sdhost_host *host = platform_get_drvdata(pdev);
> +
> +	return __local_pm_suspend(host);
> +}
> +
> +int _runtime_resume(struct device *dev)
> +{
> +	struct platform_device *pdev =
> +	    container_of(dev, struct platform_device, dev);
> +	struct sdhost_host *host = platform_get_drvdata(pdev);
> +
> +	return __local_pm_resume(host);
> +}
> +
> +int _runtime_idle(struct device *dev)
> +{
> +	return 0;
> +}
> +
> +int _pm_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev =
> +	    container_of(dev, struct platform_device, dev);
> +	struct sdhost_host *host = platform_get_drvdata(pdev);
> +
> +	_runtime_get(host);
> +
> +	host->mmc->pm_flags = host->mmc->pm_caps;
> +
> +	pr_debug("%s(%s):\n"
> +		 "sdhost clock = %d\n"
> +		 "sdhost vdd = %d\n"
> +		 "sdhost bus_mode = %d\n"
> +		 "sdhost chip_select = %d\n"
> +		 "sdhost power_mode = %d\n"
> +		 "sdhost bus_width = %d\n"
> +		 "sdhost timing = %d\n"
> +		 "sdhost signal_voltage = %d\n"
> +		 "sdhost drv_type = %d\n",
> +		 __func__, host->device_name,
> +		 host->ios.clock,
> +		 host->ios.vdd,
> +		 host->ios.bus_mode,
> +		 host->ios.chip_select,
> +		 host->ios.power_mode,
> +		 host->ios.bus_width,
> +		 host->ios.timing,
> +		 host->ios.signal_voltage, host->ios.drv_type);
> +
> +	return __local_pm_suspend(host);
> +}
> +
> +int _pm_resume(struct device *dev)
> +{
> +	struct platform_device *pdev =
> +	    container_of(dev, struct platform_device, dev);
> +	struct sdhost_host *host = platform_get_drvdata(pdev);
> +	struct mmc_ios ios;
> +
> +	__local_pm_resume(host);
> +
> +	ios = host->mmc->ios;
> +	_reset_ios(host);
> +	host->mmc->ops->set_ios(host->mmc, &ios);
> +
> +	pr_debug("%s(%s):\n"
> +		 "sdhost clock = %d\n"
> +		 "sdhost vdd = %d\n"
> +		 "sdhost bus_mode = %d\n"
> +		 "sdhost chip_select = %d\n"
> +		 "sdhost power_mode = %d\n"
> +		 "sdhost bus_width = %d\n"
> +		 "sdhost timing = %d\n"
> +		 "sdhost signal_voltage = %d\n"
> +		 "sdhost drv_type = %d\n",
> +		 __func__, host->device_name,
> +		 host->ios.clock,
> +		 host->ios.vdd,
> +		 host->ios.bus_mode,
> +		 host->ios.chip_select,
> +		 host->ios.power_mode,
> +		 host->ios.bus_width,
> +		 host->ios.timing,
> +		 host->ios.signal_voltage, host->ios.drv_type);
> +
> +	_runtime_put(host);
> +
> +	return 0;
> +}
> +
> +void __get_rsp(struct sdhost_host *host)
> +{
> +	u32 i, offset;
> +	unsigned int flags = host->cmd->flags;
> +	u32 *resp = host->cmd->resp;
> +	void __iomem *addr = host->ioaddr;
> +
> +	if (!(flags & MMC_RSP_PRESENT))
> +		return;
> +
> +	if (flags & MMC_RSP_136) {
> +		/* CRC is stripped so we need to do some shifting. */
> +		for (i = 0, offset = 12; i < 3; i++, offset -= 4) {
> +			resp[i] =
> +			    _sdhost_readl(addr, SDHOST_32_RESP + offset) << 8;
> +			resp[i] |=
> +			    _sdhost_readb(addr, SDHOST_32_RESP + offset - 1);
> +		}
> +		resp[3] = _sdhost_readl(addr, SDHOST_32_RESP) << 8;
> +	} else {
> +		resp[0] = _sdhost_readl(addr, SDHOST_32_RESP);
> +	}
> +}
> +
> +void _send_cmd(struct sdhost_host *host, struct mmc_command *cmd)
> +{
> +	struct mmc_data *data = cmd->data;
> +	int sg_cnt;
> +	u32 flag = 0;
> +	u16 rsp_type = 0;
> +	int if_has_data = 0;
> +	int if_multi = 0;
> +	int if_rd = 0;
> +	int if_dma = 0;
> +	uint16_t auto_cmd = __ACMD_DIS;
> +
> +	pr_debug("sdhost %s cmd %d, arg 0x%x, flag 0x%x\n",
> +		 host->device_name, cmd->opcode, cmd->arg, cmd->flags);
> +	if (cmd->data)
> +		pr_debug("sdhost %s block size %d, cnt %d\n",
> +			 host->device_name, cmd->data->blksz,
> +			 cmd->data->blocks);
> +
> +	_sdhost_disable_all_int(host->ioaddr);
> +
> +	if (38 == cmd->opcode) {
> +		/* if it is erase command , it's busy time will long,
> +		 * so we set long timeout value here.
> +		 */
> +		mod_timer(&host->timer, jiffies + 10 * HZ);
> +		_sdhost_writeb(host->ioaddr, __TIMEOUT_MAX_VAL,
> +			       SDHOST_8_TIMEOUT);
> +	} else {
> +		mod_timer(&host->timer, jiffies + 3 * HZ);
> +		_sdhost_writeb(host->ioaddr, host->data_time_out_val,
> +			       SDHOST_8_TIMEOUT);
> +	}
> +
> +	host->cmd = cmd;
> +	if (data) {
> +		/* set data param */
> +		WARN_ON((data->blksz * data->blocks > 524288) ||
> +		       (data->blksz > host->mmc->max_blk_size) ||
> +		       (data->blocks > 65535));
> +
> +		data->bytes_xfered = 0;
> +
> +		if_has_data = 1;
> +		if_rd = (data->flags & MMC_DATA_READ);
> +		if_multi = (mmc_op_multi(cmd->opcode) || data->blocks > 1);
> +		if (if_rd && !if_multi)
> +			flag = _DATA_FILTER_RD_SIGLE;
> +		else if (if_rd && if_multi)
> +			flag = _DATA_FILTER_RD_MULTI;
> +		else if (!if_rd && !if_multi)
> +			flag = _DATA_FILTER_WR_SIGLE;
> +		else
> +			flag = _DATA_FILTER_WR_MULT;
> +
> +		if (!host->auto_cmd_mode)
> +			flag |= _INT_ERR_ACMD;
> +
> +		if_dma = 1;
> +		auto_cmd = host->auto_cmd_mode;
> +		_sdhost_set_blk_size(host->ioaddr, data->blksz);
> +
> +		sg_cnt = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
> +				    (data->flags & MMC_DATA_READ) ?
> +				    DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +		if (1 == sg_cnt) {
> +			_sdhost_set_dma(host->ioaddr, __SDMA_MOD);
> +			_sdhost_set_16_blk_cnt(host->ioaddr, data->blocks);
> +			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
> +				       SDHOST_32_SYS_ADDR);
> +		} else {
> +			WARN_ON(1);
> +			flag |= _INT_ERR_ADMA;
> +			_sdhost_set_dma(host->ioaddr, __32_ADMA_MOD);
> +			_sdhost_set_32_blk_cnt(host->ioaddr, data->blocks);
> +			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
> +				       SDHOST_32_SYS_ADDR);
> +		}
> +	} else {
> +		/* _sdhost_set_trans_mode(host->ioaddr,
> +		 * 0, 0, __ACMD_DIS, 0, 0);
> +		 */
> +	}
> +
> +	_sdhost_writel(host->ioaddr, cmd->arg, SDHOST_32_ARG);
> +	switch (mmc_resp_type(cmd)) {
> +	case MMC_RSP_R1B:
> +		rsp_type = _RSP1B_5B;
> +		flag |= _CMD_FILTER_R1B;
> +		break;
> +	case MMC_RSP_NONE:
> +		rsp_type = _RSP0;
> +		flag |= _CMD_FILTER_R0;
> +		break;
> +	case MMC_RSP_R2:
> +		rsp_type = _RSP2;
> +		flag |= _CMD_FILTER_R2;
> +		break;
> +
> +	case MMC_RSP_R4:
> +		rsp_type = _RSP3_4;
> +		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
> +		break;
> +
> +	case MMC_RSP_R1:
> +	case MMC_RSP_R1 & ~MMC_RSP_CRC:
> +		rsp_type = _RSP1_5_6_7;
> +		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
> +		break;
> +
> +	default:
> +		WARN_ON(1);
> +		break;
> +	}
> +
> +	host->int_filter = flag;
> +	_sdhost_enable_int(host->ioaddr, flag);
> +	pr_debug("sdhost %s cmd:%d rsp:%d intflag:0x%x\n"
> +		 "if_multi:0x%x if_rd:0x%x auto_cmd:0x%x if_dma:0x%x\n",
> +		 host->device_name, cmd->opcode, mmc_resp_type(cmd),
> +		 flag, if_multi, if_rd, auto_cmd, if_dma);
> +	_sdhost_set_trans_and_cmd(host->ioaddr, if_multi, if_rd, auto_cmd,
> +		if_multi, if_dma, cmd->opcode, if_has_data, rsp_type);
> +}
> +
> +void _cmd_irq(struct sdhost_host *host, u32 intmask)
> +{
> +	if (0 == intmask) {
> +		WARN_ON(1);
> +		return;
> +	}
> +
> +	if (!host->cmd) {
> +		pr_err("%s: got command interrupt 0x%08x even though no command operation was in process\n",
> +		     host->device_name, (unsigned)intmask);
> +		return;
> +	}
> +
> +	if (_INT_ERR_CMD_TIMEOUT & intmask)
> +		host->cmd->error = -ETIMEDOUT;
> +	else if ((_INT_ERR_CMD_CRC | _INT_ERR_CMD_END |
> +		  _INT_ERR_CMD_INDEX) & intmask)
> +		host->cmd->error = -EILSEQ;
> +}
> +
> +void _data_irq(struct sdhost_host *host, u32 intmask)
> +{
> +	struct mmc_command *cmd = host->cmd;
> +	struct mmc_data *data = cmd->data;
> +
> +	if (data) {
> +		/* current error is happened in data token */
> +		if (_INT_ERR_DATA_TIMEOUT & intmask)
> +			data->error = -ETIMEDOUT;
> +		else
> +			data->error = -EILSEQ;
> +	} else {
> +		/* current error is happend in response with busy */
> +		if (_INT_ERR_DATA_TIMEOUT & intmask)
> +			cmd->error = -ETIMEDOUT;
> +		else
> +			cmd->error = -EILSEQ;
> +	}
> +}
> +
> +void _trans_end_irq(struct sdhost_host *host, u32 intmask)
> +{
> +	struct mmc_command *cmd = host->cmd;
> +	struct mmc_data *data = cmd->data;
> +
> +	if (data) {
> +		dma_unmap_sg(mmc_dev(host->mmc),
> +			     data->sg, data->sg_len,
> +			     (data->flags & MMC_DATA_READ) ?
> +			     DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +		data->error = 0;
> +		data->bytes_xfered = data->blksz * data->blocks;
> +	} else {
> +		/* R1B also can produce transferComplete interrupt */
> +		cmd->error = 0;
> +	}
> +}
> +
> +int _err_irq_handle(struct sdhost_host *host, u32 intmask)
> +{
> +	int ret = 1;
> +	struct mmc_request *mrq = host->mrq;
> +	struct mmc_command *cmd = host->cmd;
> +	struct mmc_data *data = cmd->data;
> +
> +	/* some error happened in command */
> +	_cmd_irq(host, intmask & _INT_FILTER_ERR);
> +	if (_INT_FILTER_ERR_DATA & intmask)
> +		/* some error happened in data token or command with R1B */
> +		_data_irq(host, intmask);
> +
> +	if (_INT_ERR_ACMD & intmask)
> +		/* Auto cmd12 and cmd23 error is belong to data token error */
> +		data->error = -EILSEQ;
> +
> +	if (_INT_ERR_ADMA & intmask)
> +		data->error = -EIO;
> +
> +	/* for debug */
> +	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
> +	dump_sdio_reg(host);
> +	_sdhost_disable_all_int(host->ioaddr);
> +
> +	/* if current error happened in data token we send cmd12 to stop it*/
> +	if ((mrq->cmd == cmd) && (mrq->stop)) {
> +		_sdhost_reset(host->ioaddr,
> +			_RST_CMD | _RST_DATA);
> +		_send_cmd(host, mrq->stop);
> +	} else {
> +		/* request finish with error, so reset it
> +		 * and stop the request
> +		 */
> +		_sdhost_reset(host->ioaddr,
> +			_RST_CMD | _RST_DATA);
> +		tasklet_schedule(&host->finish_tasklet);
> +	}
> +
> +	return ret;
> +}
> +
> +int _normal_irq_handle(struct sdhost_host *host, u32 intmask)
> +{
> +	int ret = 0;
> +	struct mmc_request *mrq = host->mrq;
> +	struct mmc_command *cmd = host->cmd;
> +
> +	/* delete irq that wanted in filter */
> +	/* _sdhost_clear_int(host->ioaddr,
> +	 *_INT_FILTER_NORMAL & intmask);
> +	 */
> +	host->int_filter &= ~(_INT_FILTER_NORMAL & intmask);
> +	if (_INT_DMA_END & intmask)
> +		_sdhost_writel(host->ioaddr,
> +			_sdhost_readl(host->ioaddr,
> +				SDHOST_32_SYS_ADDR),
> +				SDHOST_32_SYS_ADDR);
> +
> +	if (_INT_CMD_END & intmask) {
> +		cmd->error = 0;
> +		__get_rsp(host);
> +	}
> +	if (_INT_TRAN_END & intmask)
> +		_trans_end_irq(host, intmask);
> +	if (!(_INT_FILTER_NORMAL & host->int_filter)) {
> +		/* current cmd finished */
> +		_sdhost_disable_all_int(host->ioaddr);
> +		_sdhost_reset(host->ioaddr,
> +			_RST_CMD | _RST_DATA);
> +		if (mrq->sbc == cmd) {
> +			_send_cmd(host, mrq->cmd);
> +		} else if ((mrq->cmd == host->cmd)
> +			&& (mrq->stop)) {
> +				_send_cmd(host, mrq->stop);
> +		} else {
> +			/* finish with success and stop the
> +			 * request
> +			 */
> +			tasklet_schedule(&host->finish_tasklet);
> +			ret = 1;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +irqreturn_t _irq_func(int irq, void *param)
> +{
> +	u32 intmask;
> +	struct sdhost_host *host = (struct sdhost_host *)param;
> +	struct mmc_request *mrq = host->mrq;
> +	struct mmc_command *cmd = host->cmd;
> +	struct mmc_data *data;
> +
> +	spin_lock(&host->lock);
> +	/* maybe _timeout_func run in one core and _irq_func run in
> +	 * another core, this will panic if access cmd->data
> +	 */
> +	if ((!mrq) || (!cmd)) {
> +		spin_unlock(&host->lock);
> +		return IRQ_NONE;
> +	}
> +	data = cmd->data;
> +
> +	intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
> +	if (!intmask) {
> +		spin_unlock(&host->lock);
> +		return IRQ_NONE;
> +	}
> +	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
> +
> +	/* disable unused interrupt */
> +	_sdhost_clear_int(host->ioaddr, intmask);
> +	/* just care about the interrupt that we want */
> +	intmask &= host->int_filter;
> +
> +	while (intmask) {
> +		int ret;
> +
> +		if (_INT_FILTER_ERR & intmask) {
> +			ret = _err_irq_handle(host, intmask);
> +			if (ret)
> +				goto out;
> +		} else {
> +			ret = _normal_irq_handle(host, intmask);
> +			if (ret)
> +				goto out;
> +		}
> +
> +		intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
> +		_sdhost_clear_int(host->ioaddr, intmask);
> +		intmask &= host->int_filter;
> +	};
> +
> +out:
> +	spin_unlock(&host->lock);
> +	return IRQ_HANDLED;
> +}
> +
> +void _tasklet_func(unsigned long param)
> +{
> +	struct sdhost_host *host = (struct sdhost_host *)param;
> +	unsigned long flags;
> +	struct mmc_request *mrq;
> +
> +	del_timer(&host->timer);
> +
> +	spin_lock_irqsave(&host->lock, flags);
> +	if (!host->mrq) {
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		return;
> +	}
> +	mrq = host->mrq;
> +	host->mrq = NULL;
> +	host->cmd = NULL;
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +
> +	pr_debug("sdhost %s cmd %d data %d\n",
> +		 host->device_name, mrq->cmd->error,
> +		 ((!!mrq->cmd->data) ? mrq->cmd->data->error : 0));
> +	mmc_request_done(host->mmc, mrq);
> +	_runtime_put(host);
> +}
> +
> +void _timeout_func(unsigned long data)
> +{
> +	struct sdhost_host *host = (struct sdhost_host *)data;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&host->lock, flags);
> +	if (host->mrq) {
> +		pr_info("sdhost %s Timeout waiting for hardware interrupt!\n",
> +			host->device_name);
> +		dump_sdio_reg(host);
> +		if (host->cmd->data)
> +			host->cmd->data->error = -ETIMEDOUT;
> +		else if (host->cmd)
> +			host->cmd->error = -ETIMEDOUT;
> +		else
> +			host->mrq->cmd->error = -ETIMEDOUT;
> +
> +		_sdhost_disable_all_int(host->ioaddr);
> +		_sdhost_reset(host->ioaddr, _RST_CMD | _RST_DATA);
> +		tasklet_schedule(&host->finish_tasklet);
> +	}
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +}
> +
> +void sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	host->mrq = mrq;
> +	/* 1 find whether card is still in slot */
> +	if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE)) {
> +		if (!mmc_gpio_get_cd(host->mmc)) {
> +			mrq->cmd->error = -ENOMEDIUM;
> +			tasklet_schedule(&host->finish_tasklet);
> +			mmiowb();
> +			spin_unlock_irqrestore(&host->lock, flags);
> +			return;
> +		}
> +		/* else asume sdcard is present */
> +	}
> +
> +	/*
> +	 * in our control we can not use auto cmd12 and auto cmd23 together
> +	 * so in following program we use auto cmd23 prior to auto cmd12
> +	 */
> +	pr_debug("sdhost %s request %d %d %d\n",
> +		 host->device_name, !!mrq->sbc, !!mrq->cmd, !!mrq->stop);
> +	host->auto_cmd_mode = __ACMD_DIS;
> +	if (!mrq->sbc && mrq->stop && SDHOST_FLAG_EN_ACMD12) {
> +		host->auto_cmd_mode = __ACMD12;
> +		mrq->data->stop = NULL;
> +		mrq->stop = NULL;
> +	}
> +
> +	/* 3 send cmd list */
> +	if ((mrq->sbc) && SDHOST_FLAG_EN_ACMD23) {
> +		host->auto_cmd_mode = __ACMD23;
> +		_send_cmd(host, mrq->cmd);
> +	} else if (mrq->sbc)
> +		_send_cmd(host, mrq->sbc);
> +	else
> +		_send_cmd(host, mrq->cmd);
> +
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +}
> +
> +void signal_voltage_on_off(struct sdhost_host *host, uint32_t on_off)
> +{
> +	if (!host->mmc->supply.vqmmc) {
> +		pr_err("%s(%s) there is no signal voltage!\n",
> +		       __func__, host->device_name);
> +		return;
> +	}
> +
> +	if (on_off && (!host->sdio_1_8v_signal_enabled)) {
> +		if (!regulator_enable(host->mmc->supply.vqmmc) &&
> +			regulator_is_enabled(host->mmc->supply.vqmmc)) {
> +			host->sdio_1_8v_signal_enabled = true;
> +			pr_info("%s(%s) signal voltage enable success!\n",
> +					__func__, host->device_name);
> +		} else
> +			pr_err("%s(%s) signal voltage enable fail!\n",
> +				__func__, host->device_name);
> +
> +	} else if (!on_off && host->sdio_1_8v_signal_enabled) {
> +		if (!regulator_disable(host->mmc->supply.vqmmc) &&
> +			!regulator_is_enabled(host->mmc->supply.vqmmc)) {
> +			host->sdio_1_8v_signal_enabled = false;
> +			pr_info("%s(%s) signal voltage disable success!\n",
> +				__func__, host->device_name);
> +		} else
> +			pr_err("%s(%s) signal voltage disable fail\n",
> +				__func__, host->device_name);
> +	}
> +}
> +
> +/*
> + * 1 This votage is always poweron
> + * 2 initial votage is 2.7v~3.6v
> + * 3 It can be reconfig to 1.7v~1.95v
> + */
> +int sdhost_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +	int err;
> +
> +	pr_debug("%s(%s) vqmmc:\n"
> +		 "sdhost clock = %d-->%d\n"
> +		 "sdhost vdd = %d-->%d\n"
> +		 "sdhost bus_mode = %d-->%d\n"
> +		 "sdhost chip_select = %d-->%d\n"
> +		 "sdhost power_mode = %d-->%d\n"
> +		 "sdhost bus_width = %d-->%d\n"
> +		 "sdhost timing = %d-->%d\n"
> +		 "sdhost signal_voltage = %d-->%d\n"
> +		 "sdhost drv_type = %d-->%d\n",
> +		 __func__, host->device_name,
> +		 host->ios.clock, ios->clock,
> +		 host->ios.vdd, ios->vdd,
> +		 host->ios.bus_mode, ios->bus_mode,
> +		 host->ios.chip_select, ios->chip_select,
> +		 host->ios.power_mode, ios->power_mode,
> +		 host->ios.bus_width, ios->bus_width,
> +		 host->ios.timing, ios->timing,
> +		 host->ios.signal_voltage, ios->signal_voltage,
> +		 host->ios.drv_type, ios->drv_type);
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	if (!mmc->supply.vqmmc) {
> +		/* there are no 1.8v signal votage. */
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		_runtime_put(host);
> +		/* err = -EINVAL; */
> +		err = 0;
> +		pr_err("sdhost %s There is no signalling voltage\n",
> +		       host->device_name);
> +		return err;
> +	}
> +
> +	/* I/O power supply */
> +	if (ios->signal_voltage == host->ios.signal_voltage) {
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		_runtime_put(host);
> +		return 0;
> +	}
> +
> +	switch (ios->signal_voltage) {
> +	case MMC_SIGNAL_VOLTAGE_330:
> +		err = regulator_set_voltage(mmc->supply.vqmmc,
> +					    3000000, 3000000);
> +		break;
> +	case MMC_SIGNAL_VOLTAGE_180:
> +		err = regulator_set_voltage(mmc->supply.vqmmc,
> +					    1800000, 1800000);
> +		break;
> +	case MMC_SIGNAL_VOLTAGE_120:
> +		err = regulator_set_voltage(mmc->supply.vqmmc,
> +					    1100000, 1300000);
> +		break;
> +	default:
> +		err = -EIO;
> +		break;
> +	}
> +	if (likely(!err))
> +		host->ios.signal_voltage = ios->signal_voltage;
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +
> +	WARN(err, "Switching to signalling voltage  failed\n");
> +	return err;
> +}
> +
> +void sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +
> +	pr_debug("%s(%s) ios:\n"
> +		 "sdhost clock = %d-->%d\n"
> +		 "sdhost vdd = %d-->%d\n"
> +		 "sdhost bus_mode = %d-->%d\n"
> +		 "sdhost chip_select = %d-->%d\n"
> +		 "sdhost power_mode = %d-->%d\n"
> +		 "sdhost bus_width = %d-->%d\n"
> +		 "sdhost timing = %d-->%d\n"
> +		 "sdhost signal_voltage = %d-->%d\n"
> +		 "sdhost drv_type = %d-->%d\n",
> +		 __func__, host->device_name,
> +		 host->ios.clock, ios->clock,
> +		 host->ios.vdd, ios->vdd,
> +		 host->ios.bus_mode, ios->bus_mode,
> +		 host->ios.chip_select, ios->chip_select,
> +		 host->ios.power_mode, ios->power_mode,
> +		 host->ios.bus_width, ios->bus_width,
> +		 host->ios.timing, ios->timing,
> +		 host->ios.signal_voltage, ios->signal_voltage,
> +		 host->ios.drv_type, ios->drv_type);
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +	dump_sdio_reg(host);
> +
> +	if (0 == ios->clock) {
> +		_sdhost_all_clk_off(host->ioaddr);
> +		host->ios.clock = 0;
> +	} else if (ios->clock != host->ios.clock) {
> +		uint32_t div;
> +
> +		div = _sdhost_calc_div(host->base_clk, ios->clock);
> +		_sdhost_sd_clk_off(host->ioaddr);
> +		_sdhost_clk_set_and_on(host->ioaddr, div);
> +		_sdhost_sd_clk_on(host->ioaddr);
> +		host->ios.clock = ios->clock;
> +		host->data_time_out_val =
> +			_sdhost_calc_timeout(host->base_clk, div, 3);
> +	}
> +
> +	if (ios->power_mode != host->ios.power_mode) {
> +		switch (ios->power_mode) {
> +		case MMC_POWER_OFF:
> +			signal_voltage_on_off(host, 0);
> +			if (mmc->supply.vmmc)
> +				mmc_regulator_set_ocr(host->mmc,
> +					mmc->supply.vmmc, 0);
> +			_reset_ios(host);
> +			host->ios.power_mode = ios->power_mode;
> +			break;
> +		case MMC_POWER_ON:
> +		case MMC_POWER_UP:
> +			if (mmc->supply.vmmc)
> +				mmc_regulator_set_ocr(host->mmc,
> +					mmc->supply.vmmc, ios->vdd);
> +			signal_voltage_on_off(host, 1);
> +			host->ios.power_mode = ios->power_mode;
> +			host->ios.vdd = ios->vdd;
> +			break;
> +		default:
> +			break;
> +		}
> +	}
> +
> +	/* flash power voltage select */
> +	if (ios->vdd != host->ios.vdd) {
> +		if (mmc->supply.vmmc) {
> +			pr_info("sdhost %s 3.0 %d!\n",
> +				host->device_name, ios->vdd);
> +			mmc_regulator_set_ocr(host->mmc,
> +					mmc->supply.vmmc, ios->vdd);
> +		}
> +		host->ios.vdd = ios->vdd;
> +	}
> +
> +	if (ios->bus_width != host->ios.bus_width) {
> +		_sdhost_set_buswidth(host->ioaddr, ios->bus_width);
> +		host->ios.bus_width = ios->bus_width;
> +	}
> +
> +	if (ios->timing != host->ios.timing) {
> +		/* 1 first close SD clock */
> +		_sdhost_sd_clk_off(host->ioaddr);
> +		/* 2 set timing mode */
> +		switch (ios->timing) {	/* timing specification used */
> +		case MMC_TIMING_LEGACY:
> +			/*basic clock mode */
> +			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
> +			break;
> +		case MMC_TIMING_MMC_HS:
> +		case MMC_TIMING_SD_HS:
> +			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
> +			break;
> +		case MMC_TIMING_UHS_SDR12:
> +		case MMC_TIMING_UHS_SDR25:
> +		case MMC_TIMING_UHS_SDR50:
> +		case MMC_TIMING_UHS_SDR104:
> +		case MMC_TIMING_UHS_DDR50:
> +		case MMC_TIMING_MMC_HS200:
> +			/* _sdhost_enable_hispd(host->ioaddr); */
> +			_sdhost_set_uhs_mode(host->ioaddr, ios->timing -
> +				MMC_TIMING_UHS_SDR12 + __TIMING_MODE_SDR12);
> +			break;
> +		default:
> +			break;
> +		}
> +		/* 3 open SD clock */
> +		_sdhost_sd_clk_on(host->ioaddr);
> +		host->ios.timing = ios->timing;
> +	}
> +
> +	mdelay(100);
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +}
> +
> +int sdhost_get_ro(struct mmc_host *mmc)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +	/*read & write */
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +	return 0;
> +}
> +
> +int sdhost_get_cd(struct mmc_host *mmc)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +	int gpio_cd;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	if (host->mmc->caps & MMC_CAP_NONREMOVABLE) {
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		_runtime_put(host);
> +		return 1;
> +	}
> +
> +	gpio_cd = mmc_gpio_get_cd(host->mmc);
> +	if (IS_ERR_VALUE(gpio_cd))
> +		gpio_cd = 1;
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +	return !!gpio_cd;
> +}
> +
> +int sdhost_card_busy(struct mmc_host *mmc)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +	u32 present_state;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	/* Check whether DAT[3:0] is 0000 */
> +	present_state = _sdhost_readl(host->ioaddr, SDHOST_32_PRES_STATE);
> +
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +
> +	return !(present_state & _DAT_LVL_MASK);
> +}
> +
> +void sdhost_hw_reset(struct mmc_host *mmc)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	/* close LDO and open LDO again. */
> +	signal_voltage_on_off(host, 0);
> +	if (mmc->supply.vmmc)
> +		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
> +	mdelay(50);
> +	if (mmc->supply.vmmc)
> +		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc,
> +				      host->ios.vdd);
> +
> +	signal_voltage_on_off(host, 1);
> +	mdelay(50);
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +
> +}
> +
> +const struct mmc_host_ops sdhost_ops = {
> +	.request = sdhost_request,
> +	.set_ios = sdhost_set_ios,
> +	.get_ro = sdhost_get_ro,
> +	.get_cd = sdhost_get_cd,
> +
> +	.start_signal_voltage_switch = sdhost_set_vqmmc,
> +	.card_busy = sdhost_card_busy,
> +	.hw_reset = sdhost_hw_reset,
> +};
> +
> +void get_caps_info(struct sdhost_host *host, struct sdhost_caps_data *pdata)
> +{
> +	host->device_name = pdata->name;
> +	host->ocr_avail = pdata->ocr_avail;
> +	host->caps = pdata->caps;
> +	host->caps2 = pdata->caps2;
> +	host->pm_caps = pdata->pm_caps;
> +	host->base_clk = pdata->base_clk;
> +	host->signal_default_voltage = pdata->signal_default_voltage;
> +}
> +
> +int get_basic_resource(struct platform_device *pdev, struct sdhost_host *host)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct resource *res;
> +	uint32_t sdhost_delay[3];
> +	struct sdhost_caps_data *pdata;
> +	const struct of_device_id *of_id;
> +	int ret;
> +
> +	of_id = of_match_node(sdhost_of_match, np);
> +	if (!of_id) {
> +		dev_err(&pdev->dev, "failed to match node\n");
> +		return -ENODEV;
> +	}
> +	pdata = (struct sdhost_caps_data *)of_id->data;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return -ENOENT;
> +
> +	host->ioaddr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> +	host->mapbase = res->start;
> +	host->irq = platform_get_irq(pdev, 0);
> +	if (host->irq < 0)
> +		return host->irq;
> +
> +#if 0
> +	host->clk = of_clk_get(np, 0);
> +	if (IS_ERR_OR_NULL(host->clk))
> +		return PTR_ERR(host->clk);
> +
> +	host->clk_parent = of_clk_get(np, 1);
> +	if (IS_ERR_OR_NULL(host->clk_parent))
> +		return PTR_ERR(host->clk_parent);
> +#endif
> +
> +	get_caps_info(host, pdata);
> +	host->detect_gpio = of_get_named_gpio(np, "cd-gpios", 0);
> +	if (!gpio_is_valid(host->detect_gpio))
> +		host->detect_gpio = -1;
> +
> +	ret = of_property_read_u32_array(np, "sprd,delay", sdhost_delay, 3);
> +	if (!ret) {
> +		host->write_delay = sdhost_delay[0];
> +		host->read_pos_delay = sdhost_delay[1];
> +		host->read_neg_delay = sdhost_delay[2];
> +	} else
> +		dev_err(&pdev->dev, "can not read the property of sprd delay\n");
> +
> +	return 0;
> +}
> +
> +int get_external_resource(struct sdhost_host *host)
> +{
> +	int err;
> +	struct mmc_host *mmc = host->mmc;
> +
> +	host->dma_mask = DMA_BIT_MASK(64);
> +	host->data_time_out_val = 0;
> +
> +	/* 1 LDO */
> +	mmc_regulator_get_supply(mmc);
> +	if (IS_ERR_OR_NULL(mmc->supply.vmmc)) {
> +		pr_err("%s(%s): no vmmc regulator found\n",
> +		       __func__, host->device_name);
> +		mmc->supply.vmmc = NULL;
> +	}
> +	if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) {
> +		pr_err("%s(%s): no vqmmc regulator found\n",
> +		       __func__, host->device_name);
> +		mmc->supply.vqmmc = NULL;
> +	} else {
> +		regulator_is_supported_voltage(mmc->supply.vqmmc,
> +			host->signal_default_voltage,
> +			host->signal_default_voltage);
> +		regulator_set_voltage(mmc->supply.vqmmc,
> +			host->signal_default_voltage,
> +			host->signal_default_voltage);
> +	}
> +	host->mmc = mmc;
> +
> +#if 0
> +	/* 2 clock */
> +	clk_set_parent(host->clk, host->clk_parent);
> +	clk_prepare_enable(host->clk);
> +#endif
> +	/* 3 reset sdio */
> +	_reset_ios(host);
> +	err = devm_request_irq(&host->pdev->dev, host->irq, _irq_func,
> +			       IRQF_SHARED, mmc_hostname(host->mmc), host);
> +	if (err)
> +		return err;
> +	tasklet_init(&host->finish_tasklet, _tasklet_func, (unsigned long)host);
> +	/* 4 init timer */
> +	setup_timer(&host->timer, _timeout_func, (unsigned long)host);
> +
> +	return 0;
> +}
> +
> +int set_mmc_struct(struct sdhost_host *host, struct mmc_host *mmc)
> +{
> +	int ret = 0;
> +
> +	mmc = host->mmc;
> +	mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
> +	mmc->ops = &sdhost_ops;
> +	mmc->f_max = host->base_clk;
> +	mmc->f_min = (unsigned int)(host->base_clk / __CLK_MAX_DIV);
> +	mmc->max_busy_timeout = (1 << 27) / (host->base_clk / 1000);
> +
> +	mmc->caps = host->caps;
> +	mmc->caps2 = host->caps2;
> +	mmc->pm_caps = host->pm_caps;
> +	mmc->pm_flags = host->pm_caps;
> +	mmc->ocr_avail = host->ocr_avail;
> +	mmc->ocr_avail_sdio = host->ocr_avail;
> +	mmc->ocr_avail_sd = host->ocr_avail;
> +	mmc->ocr_avail_mmc = host->ocr_avail;
> +	mmc->max_current_330 = SDHOST_MAX_CUR;
> +	mmc->max_current_300 = SDHOST_MAX_CUR;
> +	mmc->max_current_180 = SDHOST_MAX_CUR;
> +
> +	mmc->max_segs = 1;
> +	mmc->max_req_size = 524288;	/* 512k */
> +	mmc->max_seg_size = mmc->max_req_size;
> +
> +	mmc->max_blk_size = 512;
> +	mmc->max_blk_count = 65535;
> +
> +	ret = mmc_of_parse(mmc);
> +	if (ret) {
> +		mmc_free_host(mmc);
> +		pr_info("parse sprd %s controller fail\n", host->device_name);
> +		return ret;
> +	}
> +
> +	pr_info("%s(%s): ocr avail = 0x%x\n"
> +		"base clock = %u, pm_caps = 0x%x\n"
> +		"caps: 0x%x, caps2: 0x%x\n",
> +		__func__, host->device_name, mmc->ocr_avail,
> +		host->base_clk, host->pm_caps, mmc->caps, mmc->caps2);
> +
> +	return ret;
> +}
> +
> +int sdhost_probe(struct platform_device *pdev)
> +{
> +	struct mmc_host *mmc;
> +	struct sdhost_host *host;
> +	int ret;
> +
> +	/* globe resource */
> +	mmc = mmc_alloc_host(sizeof(struct sdhost_host), &pdev->dev);
> +	if (!mmc) {
> +		dev_err(&pdev->dev, "no memory for MMC host\n");
> +		return -ENOMEM;
> +	}
> +
> +	host = mmc_priv(mmc);
> +	host->mmc = mmc;
> +	host->pdev = pdev;
> +	spin_lock_init(&host->lock);
> +	platform_set_drvdata(pdev, host);
> +
> +	/* get sdio irq and sdio iomem */
> +	ret = get_basic_resource(pdev, host);
> +	if (ret) {
> +		dev_err(&pdev->dev, "fail to get basic resource: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = get_external_resource(host);
> +	if (ret) {
> +		dev_err(&pdev->dev, "fail to get external resource: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = set_mmc_struct(host, mmc);
> +	if (ret) {
> +		dev_err(&pdev->dev, "fail to set mmc struct: %d\n", ret);
> +		return ret;
> +	}
> +
> +	pm_runtime_setting(pdev, host);
> +
> +	/*add host */
> +	mmiowb();
> +	ret = mmc_add_host(mmc);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret);
> +		mmc_free_host(mmc);
> +	}
> +
> +	if (-1 != host->detect_gpio)
> +		mmc_gpio_request_cd(mmc, host->detect_gpio, 0);
> +
> +	sdhost_add_debugfs(host);
> +
> +	dev_info(&pdev->dev,
> +		 "Spreadtrum %s host controller at 0x%08lx irq %d\n",
> +		 host->device_name, host->mapbase, host->irq);
> +
> +	return ret;
> +}
> +
> +void sdhost_shutdown(struct platform_device *pdev)
> +{
> +}
> +
> +const struct dev_pm_ops sdhost_dev_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(_pm_suspend, _pm_resume)
> +	SET_RUNTIME_PM_OPS(_runtime_suspend,
> +			       _runtime_resume, _runtime_idle)
> +};
> +
> +MODULE_DEVICE_TABLE(of, sdhost_of_match);
> +
> +struct platform_driver sdhost_driver = {
> +	.probe = sdhost_probe,
> +	.shutdown = sdhost_shutdown,
> +	.driver = {
> +		   .owner = THIS_MODULE,
> +		   .pm = &sdhost_dev_pm_ops,
> +		   .name = DRIVER_NAME,
> +		   .of_match_table = of_match_ptr(sdhost_of_match),
> +		   },
> +};
> +
> +module_platform_driver(sdhost_driver);
> +
> +MODULE_DESCRIPTION("Spreadtrum sdio host controller driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/mmc/host/sprd_sdhost.h b/drivers/mmc/host/sprd_sdhost.h
> new file mode 100644
> index 0000000..5778b6d
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost.h
> @@ -0,0 +1,507 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost.h - Secure Digital Host Controller
> + * Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +
> +#ifndef __SDHOST_H_
> +#define __SDHOST_H_
> +
> +#include <linux/clk.h>
> +#include <linux/compiler.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mmc/card.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/slot-gpio.h>
> +#include <linux/scatterlist.h>
> +#include <linux/types.h>
> +
> +/* Controller flag */
> +#define SDHOST_FLAG_EN_ACMD12	1
> +#define SDHOST_FLAG_EN_ACMD23	1
> +#define SDHOST_FLAG_USE_ADMA	1
> +
> +/* Controller registers */
> +static inline void _sdhost_writeb(void __iomem *ioadr, uint8_t val, int reg)
> +{
> +		writeb_relaxed(val, ioadr + reg);
> +}
> +static inline void _sdhost_writew(void __iomem *ioadr, uint16_t val, int reg)
> +{
> +		writew_relaxed(val, ioadr + reg);
> +}
> +static inline void _sdhost_writel(void __iomem *ioadr, uint32_t val, int reg)
> +{
> +		writel_relaxed(val, ioadr + reg);
> +}
> +static inline uint8_t _sdhost_readb(void __iomem *ioadr, int reg)
> +{
> +		return readb_relaxed(ioadr + reg);
> +}
> +static inline uint16_t _sdhost_readw(void __iomem *ioadr, int reg)
> +{
> +		return readw_relaxed(ioadr + reg);
> +}
> +static inline uint32_t _sdhost_readl(void __iomem *ioadr, int reg)
> +{
> +		return readl_relaxed(ioadr + reg);
> +}
> +#define SDHOST_32_SYS_ADDR	0x00
> +/* used in cmd23 with ADMA in sdio 3.0 */
> +#define SDHOST_32_BLK_CNT	0x00
> +#define SDHOST_16_BLK_CNT	0x06
> +
> +static inline void _sdhost_set_16_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
> +{
> +	writew_relaxed((blk_cnt & 0xFFFF), ioadr + SDHOST_16_BLK_CNT);
> +}
> +
> +static inline void _sdhost_set_32_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
> +{
> +	writel_relaxed((blk_cnt & 0xFFFFFFFF), ioadr + SDHOST_32_BLK_CNT);
> +}
> +
> +#define SDHOST_16_BLK_SIZE	0x04
> +
> +static inline void _sdhost_set_blk_size(void __iomem *ioadr, uint32_t blk_size)
> +{
> +	writew_relaxed((blk_size & 0xFFF) | 0x7000, ioadr + SDHOST_16_BLK_SIZE);
> +}
> +
> +#define SDHOST_32_ARG			0x08
> +#define SDHOST_16_TR_MODE		0x0C
> +#define __ACMD_DIS	0x00
> +#define __ACMD12	0x01
> +#define __ACMD23	0x02
> +static inline void _sdhost_set_trans_mode(
> +				void __iomem *io_addr, int if_multi,
> +				int if_read, uint16_t auto_cmd,
> +				int if_blk_cnt, int if_dma)
> +{
> +	writew_relaxed(
> +		(((if_multi ? 1 : 0) << 5) |
> +		((if_read ? 1 : 0) << 4) |
> +		(((u16)auto_cmd) << 2) |
> +		((if_blk_cnt ? 1 : 0) << 1) |
> +		((if_dma ? 1 : 0) << 0)) ,
> +		io_addr + SDHOST_16_TR_MODE);
> +}
> +
> +#define SDHOST_16_CMD			0x0E
> +#define _CMD_INDEX_CHK			0x0010
> +#define _CMD_CRC_CHK			0x0008
> +#define _CMD_RSP_NONE			0x0000
> +#define _CMD_RSP_136			0x0001
> +#define _CMD_RSP_48				0x0002
> +#define _CMD_RSP_48_BUSY		0x0003
> +#define _RSP0			0
> +#define _RSP1_5_6_7	\
> +		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48)
> +#define _RSP2 \
> +		(_CMD_CRC_CHK | _CMD_RSP_136)
> +#define _RSP3_4	\
> +		_CMD_RSP_48
> +#define _RSP1B_5B \
> +		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48_BUSY)
> +
> +static inline void _sdhost_set_cmd(
> +				void __iomem *ioadr, u32 cmd,
> +				int if_has_data, u32 rsp_type)
> +{
> +	writew_relaxed(
> +		((((u16)(cmd)) << 8) |
> +		(((if_has_data) ? 1 : 0) << 5) |
> +		((u16)(rsp_type))),
> +		(ioadr) + SDHOST_16_CMD);
> +}
> +
> +#define SDHOST_32_TR_MODE_AND_CMD		0x0C
> +
> +static inline void _sdhost_set_trans_and_cmd(
> +				void __iomem *ioadr, int if_multi,
> +				int if_read, uint16_t auto_cmd,
> +				int if_blk_cnt, int if_dma, u32 cmd,
> +				int if_has_data, u32 rsp_type)
> +{
> +	writel_relaxed(
> +		((((if_multi) ? 1 : 0) << 5) |
> +		(((if_read) ? 1 : 0) << 4) |
> +		(((u32)(auto_cmd)) << 2) |
> +		(((if_blk_cnt) ? 1 : 0) << 1) |
> +		(((if_dma) ? 1 : 0) << 0) |
> +		(((u32)(cmd)) << 24) |
> +		(((if_has_data) ? 1 : 0) << 21) |
> +		(((u32)(rsp_type)) << 16)) ,
> +		ioadr + SDHOST_32_TR_MODE_AND_CMD);
> +}
> +
> +#define SDHOST_32_RESP	0x10
> +#define SDHOST_32_PRES_STATE	0x24
> +#define  _DAT_LVL_MASK		0x00F00000
> +#define SDHOST_8_HOST_CTRL	0x28
> +#define __8_BIT_MOD		0x20
> +#define __4_BIT_MOD		0x02
> +#define __1_BIT_MOD	0x00
> +#define __SDMA_MOD		0x00
> +#define __32_ADMA_MOD	0x10
> +#define __64_ADMA_MOD	0x18
> +#define __HISPD_MOD		0x04
> +
> +static inline void _sdhost_set_buswidth(void __iomem *ioadr, uint32_t buswidth)
> +{
> +	u8 ctrl = 0;
> +
> +	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
> +	ctrl &= (~(__8_BIT_MOD | __4_BIT_MOD | __1_BIT_MOD));
> +	switch (buswidth) {
> +	case MMC_BUS_WIDTH_1:
> +		ctrl |= __1_BIT_MOD;
> +		break;
> +	case MMC_BUS_WIDTH_4:
> +		ctrl |= __4_BIT_MOD;
> +		break;
> +	case MMC_BUS_WIDTH_8:
> +		ctrl |= __8_BIT_MOD;
> +		break;
> +	default:
> +		BUG_ON(1);
> +		break;
> +	}
> +	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
> +}
> +
> +static inline void _sdhost_set_dma(void __iomem *ioadr, u8 dmaMod)
> +{
> +	u8 ctrl = 0;
> +
> +	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
> +	ctrl &= (~(__SDMA_MOD | __32_ADMA_MOD | __64_ADMA_MOD));
> +	ctrl |= dmaMod;
> +	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
> +}
> +
> +static inline void _sdhost_enable_hispd(void __iomem *ioadr)
> +{
> +	u8 ctrl = 0;
> +
> +	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
> +	ctrl |= __HISPD_MOD;
> +	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
> +}
> +
> +/*#define SDHOST_8_PWR_CTRL     0x29    */ /* not used */
> +#define SDHOST_8_BLK_GAP		0x2A	/* not used */
> +#define SDHOST_8_WACKUP_CTRL	0x2B	/* not used */
> +#define SDHOST_16_CLOCK_CTRL	0x2C
> +#define __CLK_IN_EN		0x0001
> +#define __CLK_IN_STABLE	0x0002
> +#define __CLK_SD			0x0004
> +#define __CLK_MAX_DIV		2046
> +
> +static inline void _sdhost_all_clk_off(void __iomem *ioadr)
> +{
> +	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
> +}
> +
> +static inline void _sdhost_sd_clk_off(void __iomem *ioadr)
> +{
> +	u16 ctrl = 0;
> +
> +	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
> +	ctrl &= (~__CLK_SD);
> +	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
> +}
> +
> +static inline void _sdhost_sd_clk_on(void __iomem *ioadr)
> +{
> +	u16 ctrl = 0;
> +
> +	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
> +	ctrl |= __CLK_SD;
> +	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
> +}
> +
> +static inline uint32_t _sdhost_calc_div(uint32_t base_clk, uint32_t clk)
> +{
> +	uint32_t N;
> +
> +	if (base_clk <= clk)
> +		return 0;
> +
> +	N = (uint32_t) (base_clk / clk);
> +	N = (N >> 1);
> +	if (N)
> +		N--;
> +	if ((base_clk / ((N + 1) << 1)) > clk)
> +		N++;
> +	if (__CLK_MAX_DIV < N)
> +		N = __CLK_MAX_DIV;
> +	return N;
> +}
> +
> +static inline void _sdhost_clk_set_and_on(void __iomem *ioadr, uint32_t div)
> +{
> +	u16 ctrl = 0;
> +
> +	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
> +	ctrl |= (uint16_t) (((div & 0x300) >> 2) | ((div & 0xFF) << 8));
> +	ctrl |= __CLK_IN_EN;
> +	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
> +	while (!(__CLK_IN_STABLE & readw_relaxed(ioadr +
> +						SDHOST_16_CLOCK_CTRL)))
> +		;
> +}
> +
> +#define SDHOST_8_TIMEOUT		0x2E
> +#define __TIMEOUT_MAX_VAL		0xe
> +static inline uint8_t _sdhost_calc_timeout(uint32_t base_clk,
> +						uint32_t div, uint32_t seconds)
> +{
> +	uint32_t sd_clk = seconds * (base_clk / ((div + 1) << 1));
> +	uint8_t i;
> +
> +	for (i = 0; i < 15; i++) {
> +		if ((((uint32_t) 1) << (16 + i)) > sd_clk) {
> +			if (0 != i)
> +				i--;
> +			break;
> +		}
> +	}
> +	return i;
> +}
> +
> +#define SDHOST_8_RESET			0x2F
> +#define  _RST_ALL		0x01
> +#define  _RST_CMD		0x02
> +#define  _RST_DATA		0x04
> +#define  _RST_EMMC		0x08	/*spredtrum define it byself */
> +
> +static inline void _sdhost_reset(void __iomem *ioadr, uint8_t mask)
> +{
> +	writeb_relaxed((_RST_EMMC | mask), ioadr + SDHOST_8_RESET);
> +	while (_sdhost_readb(ioadr, SDHOST_8_RESET) & mask)
> +		;
> +}
> +
> +/* spredtrum define it byself */
> +static inline void _sdhost_reset_emmc(void __iomem *ioadr)
> +{
> +	writeb_relaxed(0, ioadr + SDHOST_8_RESET);
> +	mdelay(2);
> +	writeb_relaxed(_RST_EMMC, ioadr + SDHOST_8_RESET);
> +}
> +
> +#define SDHOST_32_INT_STATUS		0x30
> +#define SDHOST_32_INT_STATUS_EN	0x34
> +#define SDHOST_32_INT_SIGNAL_EN	0x38
> +#define _INT_CMD_END		0x00000001
> +#define _INT_TRAN_END		0x00000002
> +#define _INT_DMA_END		0x00000008
> +#define _INT_WR_RDY			0x00000010	/*not used */
> +#define _INT_RD_RDY			0x00000020	/* not used */
> +#define _INT_ERR				0x00008000
> +#define _INT_ERR_CMD_TIMEOUT	0x00010000
> +#define _INT_ERR_CMD_CRC		0x00020000
> +#define _INT_ERR_CMD_END		0x00040000
> +#define _INT_ERR_CMD_INDEX	0x00080000
> +#define _INT_ERR_DATA_TIMEOUT	0x00100000
> +#define _INT_ERR_DATA_CRC		0x00200000
> +#define _INT_ERR_DATA_END		0x00400000
> +#define _INT_ERR_CUR_LIMIT		0x00800000
> +#define _INT_ERR_ACMD			0x01000000
> +#define _INT_ERR_ADMA			0x02000000
> +
> +/* used in irq */
> +#define _INT_FILTER_ERR_CMD \
> +		(_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
> +		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX)
> +#define _INT_FILTER_ERR_DATA \
> +		(_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
> +		_INT_ERR_DATA_END)
> +#define _INT_FILTER_ERR \
> +		(_INT_ERR | _INT_FILTER_ERR_CMD | \
> +		_INT_FILTER_ERR_DATA | _INT_ERR_ACMD | \
> +		_INT_ERR_ADMA)
> +#define _INT_FILTER_NORMAL \
> +		(_INT_CMD_END | _INT_TRAN_END)
> +
> +/* used for setting */
> +#define _DATA_FILTER_RD_SIGLE \
> +		(_INT_TRAN_END | _INT_DMA_END | \
> +		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
> +		_INT_ERR_DATA_CRC | _INT_ERR_DATA_END)
> +#define _DATA_FILTER_RD_MULTI \
> +		(_INT_TRAN_END | _INT_DMA_END | _INT_ERR | \
> +		_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
> +		_INT_ERR_DATA_END)
> +#define _DATA_FILTER_WR_SIGLE \
> +		(_INT_TRAN_END | _INT_DMA_END | \
> +		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
> +		_INT_ERR_DATA_CRC)
> +#define _DATA_FILTER_WR_MULT \
> +		(_INT_TRAN_END | _INT_DMA_END | \
> +		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
> +		_INT_ERR_DATA_CRC)
> +#define _CMD_FILTER_R0 \
> +		(_INT_CMD_END)
> +#define _CMD_FILTER_R2 \
> +		(_INT_CMD_END | _INT_ERR | \
> +		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
> +		_INT_ERR_CMD_END)
> +#define _CMD_FILTER_R3 \
> +		(_INT_CMD_END | _INT_ERR | \
> +		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_END)
> +#define _CMD_FILTER_R1_R4_R5_R6_R7 \
> +		(_INT_CMD_END | _INT_ERR | _INT_ERR_CMD_TIMEOUT | \
> +		_INT_ERR_CMD_CRC | _INT_ERR_CMD_END | \
> +		_INT_ERR_CMD_INDEX)
> +#define _CMD_FILTER_R1B \
> +		(_INT_CMD_END | _INT_ERR | \
> +		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
> +		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX | \
> +		_INT_TRAN_END | _INT_ERR_DATA_TIMEOUT)
> +
> +
> +static inline void _sdhost_disable_all_int(void __iomem *ioadr)
> +{
> +	writel_relaxed(0x0, ioadr + SDHOST_32_INT_SIGNAL_EN);
> +	writel_relaxed(0x0, ioadr + SDHOST_32_INT_STATUS_EN);
> +	writel_relaxed(0xFFFFFFFF, ioadr + SDHOST_32_INT_STATUS);
> +}
> +
> +static inline void _sdhost_enable_int(void __iomem *ioadr, u32 mask)
> +{
> +	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS_EN);
> +	writel_relaxed(mask, ioadr + SDHOST_32_INT_SIGNAL_EN);
> +}
> +
> +static inline void _sdhost_clear_int(void __iomem *ioadr, u32 mask)
> +{
> +	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS);
> +}
> +
> +#define SDHOST_16_ACMD_ERR		0x3C
> +
> +#define SDHOST_16_HOST_CTRL_2		0x3E
> +#define __TIMING_MODE_SDR12		0x0000
> +#define __TIMING_MODE_SDR25		0x0001
> +#define __TIMING_MODE_SDR50		0x0002
> +#define __TIMING_MODE_SDR104	0x0003
> +#define __TIMING_MODE_DDR50	0x0004
> +#define __TIMING_MODE_SDR200	0x0005
> +
> +static inline void _sdhost_set_uhs_mode(void __iomem *ioadr, uint16_t mode)
> +{
> +	writew_relaxed(mode, ioadr +  SDHOST_16_HOST_CTRL_2);
> +}
> +
> +#define SDHOST_MAX_CUR	1020
> +
> +/* following register is defined by spreadtrum self.
> + * It is not standard register of SDIO.
> + */
> +static inline void _sdhost_set_delay(
> +				void __iomem *ioadr, uint32_t write_delay,
> +				uint32_t read_pos_delay,
> +				uint32_t read_neg_delay)
> +{
> +	writel_relaxed(write_delay, ioadr + 0x80);
> +	writel_relaxed(read_pos_delay, ioadr + 0x84);
> +	writel_relaxed(read_neg_delay, ioadr + 0x88);
> +}
> +
> +#define SDHOST_32_CAPS	0x40
> +#define  __TIMEOUT_CLK_MASK	0x0000003F
> +#define  __TIMEOUT_CLK_SHIFT 0
> +#define  __TIMEOUT_CLK_UNIT	0x00000080
> +#define  __CLOCK_BASE_MASK	0x00003F00
> +#define  __CLOCK_V3_BASE_MASK	0x0000FF00
> +#define  __CLOCK_BASE_SHIFT	8
> +#define  __MAX_BLOCK_MASK	0x00030000
> +#define  __MAX_BLOCK_SHIFT  16
> +#define  __CAN_DO_8BIT	0x00040000
> +#define  __CAN_DO_ADMA2	0x00080000
> +#define  __CAN_DO_ADMA1	0x00100000
> +#define  __CAN_DO_HISPD	0x00200000
> +#define  __CAN_DO_SDMA	0x00400000
> +#define  __CAN_VDD_330	0x01000000
> +#define  __CAN_VDD_300	0x02000000
> +#define  __CAN_VDD_180	0x04000000
> +#define  __CAN_64BIT	0x10000000
> +
> +#define SDHOST_32_CAPS2	0x44
> +#define  __SUPPORT_SDR50	0x00000001
> +#define  __SUPPORT_SDR104	0x00000002
> +#define  __SUPPORT_DDR50	0x00000004
> +#define  __DRIVER_TYPE_A	0x00000010
> +#define  __DRIVER_TYPE_C	0x00000020
> +#define  __DRIVER_TYPE_D	0x00000040
> +#define  __RETUNING_TIMER_COUNT_MASK	0x00000F00
> +#define  __RETUNING_TIMER_COUNT_SHIFT	8
> +#define  __USE_SDR50_TUNING			0x00002000
> +#define  __RETUNING_MODE_MASK		0x0000C000
> +#define  __RETUNING_MODE_SHIFT		14
> +#define  __CLOCK_MUL_MASK	0x00FF0000
> +#define  __CLOCK_MUL_SHIFT	16
> +
> +
> +/**********************************************************\
> + *
> + * Controller block structure
> + *
> +\**********************************************************/
> +struct sdhost_host {
> +	/* --globe resource--- */
> +	spinlock_t lock;
> +	struct mmc_host *mmc;
> +
> +	/*--basic resource-- */
> +	void __iomem *ioaddr;
> +	int irq;
> +	const char *device_name;
> +	struct platform_device *pdev;
> +	unsigned long mapbase;
> +
> +	int detect_gpio;
> +	uint32_t ocr_avail;
> +	char *clk_name;
> +	char *clk_parent_name;
> +	uint32_t base_clk;
> +	uint32_t caps;
> +	uint32_t caps2;
> +	uint32_t pm_caps;
> +	uint32_t write_delay;
> +	uint32_t read_pos_delay;
> +	uint32_t read_neg_delay;
> +
> +	/* --extern resource getted by base resource-- */
> +	uint64_t dma_mask;
> +	uint8_t data_time_out_val;
> +	uint32_t signal_default_voltage;
> +	bool sdio_1_8v_signal_enabled;
> +	struct clk *clk;
> +	struct clk *clk_parent;
> +	struct tasklet_struct finish_tasklet;
> +	struct timer_list timer;
> +
> +	/* --runtime param-- */
> +	uint32_t int_filter;
> +	struct mmc_ios ios;
> +	struct mmc_request *mrq;	/* Current request */
> +	struct mmc_command *cmd;	/* Current command */
> +	uint16_t auto_cmd_mode;
> +
> +	/*--debugfs-- */
> +	struct dentry *debugfs_root;
> +};
> +
> +#endif /* __SDHOST_H_ */
> diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.c b/drivers/mmc/host/sprd_sdhost_debugfs.c
> new file mode 100644
> index 0000000..bc04aea
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost_debugfs.c
> @@ -0,0 +1,213 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost_debugfs.c - Secure Digital Host
> + * Controller Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +#include <linux/debugfs.h>
> +#include <linux/delay.h>
> +#include <linux/mmc/host.h>
> +
> +#include "sprd_sdhost_debugfs.h"
> +
> +#define ELEMENT(v) {v, #v}
> +#define ELEMENT_NUM	26
> +struct {
> +	uint32_t bit;
> +	char *caps_name;
> +} caps_info[3][ELEMENT_NUM] = {
> +	{
> +		ELEMENT(MMC_CAP_4_BIT_DATA),
> +		ELEMENT(MMC_CAP_MMC_HIGHSPEED),
> +		ELEMENT(MMC_CAP_SD_HIGHSPEED),
> +		ELEMENT(MMC_CAP_SDIO_IRQ),
> +		ELEMENT(MMC_CAP_SPI),
> +		ELEMENT(MMC_CAP_NEEDS_POLL),
> +		ELEMENT(MMC_CAP_8_BIT_DATA),
> +		ELEMENT(MMC_CAP_AGGRESSIVE_PM),
> +		ELEMENT(MMC_CAP_NONREMOVABLE),
> +		ELEMENT(MMC_CAP_WAIT_WHILE_BUSY),
> +		ELEMENT(MMC_CAP_ERASE),
> +		ELEMENT(MMC_CAP_1_8V_DDR),
> +		ELEMENT(MMC_CAP_1_2V_DDR),
> +		ELEMENT(MMC_CAP_POWER_OFF_CARD),
> +		ELEMENT(MMC_CAP_BUS_WIDTH_TEST),
> +		ELEMENT(MMC_CAP_UHS_SDR12),
> +		ELEMENT(MMC_CAP_UHS_SDR25),
> +		ELEMENT(MMC_CAP_UHS_SDR50),
> +		ELEMENT(MMC_CAP_UHS_SDR104),
> +		ELEMENT(MMC_CAP_UHS_DDR50),
> +		ELEMENT(MMC_CAP_RUNTIME_RESUME),
> +		ELEMENT(MMC_CAP_DRIVER_TYPE_A),
> +		ELEMENT(MMC_CAP_DRIVER_TYPE_C),
> +		ELEMENT(MMC_CAP_DRIVER_TYPE_D),
> +		ELEMENT(MMC_CAP_CMD23),
> +		ELEMENT(MMC_CAP_HW_RESET)
> +	}, {
> +		ELEMENT(MMC_CAP2_BOOTPART_NOACC),
> +		ELEMENT(MMC_CAP2_FULL_PWR_CYCLE),
> +		ELEMENT(MMC_CAP2_HS200_1_8V_SDR),
> +		ELEMENT(MMC_CAP2_HS200_1_2V_SDR),
> +		ELEMENT(MMC_CAP2_HS200),
> +		ELEMENT(MMC_CAP2_HC_ERASE_SZ),
> +		ELEMENT(MMC_CAP2_CD_ACTIVE_HIGH),
> +		ELEMENT(MMC_CAP2_RO_ACTIVE_HIGH),
> +		ELEMENT(MMC_CAP2_PACKED_RD),
> +		ELEMENT(MMC_CAP2_PACKED_WR),
> +		ELEMENT(MMC_CAP2_PACKED_CMD),
> +		ELEMENT(MMC_CAP2_NO_PRESCAN_POWERUP),
> +		ELEMENT(MMC_CAP2_HS400_1_8V),
> +		ELEMENT(MMC_CAP2_HS400_1_2V),
> +		ELEMENT(MMC_CAP2_HS400),
> +		ELEMENT(MMC_CAP2_SDIO_IRQ_NOTHREAD)
> +	}, {
> +		ELEMENT(MMC_PM_KEEP_POWER),
> +		ELEMENT(MMC_PM_WAKE_SDIO_IRQ),
> +		ELEMENT(MMC_PM_IGNORE_PM_NOTIFY)
> +	}
> +
> +};
> +
> +static int sdhost_param_show(struct seq_file *s, void *data)
> +{
> +	struct sdhost_host *host = s->private;
> +	uint32_t i;
> +
> +	seq_printf(s, "\n"
> +		   "ioaddr\t= 0x%p\n"
> +		   "irq\t= %d\n"
> +		   "device_name\t= %s\n"
> +		   "detect_gpio\t= %d\n"
> +		   "base_clk\t= %d\n"
> +		   "write_delay\t= %d\n"
> +		   "read_pos_delay\t= %d\n"
> +		   "read_neg_delay\t= %d\n",
> +		   host->ioaddr, host->irq, host->device_name,
> +		   host->detect_gpio, host->base_clk,
> +		   host->write_delay, host->read_pos_delay,
> +		   host->read_neg_delay);
> +	seq_printf(s, "OCR 0x%x\n", host->ocr_avail);
> +
> +	for (i = 0; i < ELEMENT_NUM; i++) {
> +		if ((caps_info[0][i].bit ==
> +			(host->caps & caps_info[0][i].bit))
> +					&& caps_info[0][i].bit)
> +			seq_printf(s, "caps:%s\n", caps_info[0][i].caps_name);
> +	}
> +	for (i = 0; i < ELEMENT_NUM; i++) {
> +		if ((caps_info[1][i].bit ==
> +			(host->caps2 & caps_info[1][i].bit))
> +						&& caps_info[1][i].bit)
> +			seq_printf(s, "caps2:%s\n", caps_info[1][i].caps_name);
> +	}
> +	for (i = 0; i < ELEMENT_NUM; i++) {
> +		if ((caps_info[2][i].bit ==
> +				(host->pm_caps & caps_info[2][i].bit))
> +							&& caps_info[2][i].bit)
> +			seq_printf(s, "pm_caps:%s\n",
> +					caps_info[2][i].caps_name);
> +	}
> +
> +	return 0;
> +}
> +
> +static int sdhost_param_open(struct inode *inode, struct file *file)
> +{
> +	return single_open(file, sdhost_param_show, inode->i_private);
> +}
> +
> +static const struct file_operations sdhost_param_fops = {
> +	.open = sdhost_param_open,
> +	.read = seq_read,
> +	.llseek = seq_lseek,
> +	.release = single_release,
> +};
> +
> +#define SDHOST_ATTR(PARAM_NAME)	\
> +	static int sdhost_##PARAM_NAME##_get(void *data, u64 *val)\
> +	{ \
> +		struct sdhost_host *host = data;\
> +		*val = (u64)host->PARAM_NAME;\
> +		return 0;\
> +	} \
> +	static int sdhost_##PARAM_NAME##_set(void *data, u64 val)\
> +	{ \
> +		struct sdhost_host *host = data;\
> +		if (0x7F >= (uint32_t)val) { \
> +			host->PARAM_NAME = (uint32_t)val;\
> +			_sdhost_set_delay(host->ioaddr, \
> +							host->write_delay, \
> +							host->read_pos_delay, \
> +							host->read_neg_delay);\
> +		} \
> +		return 0;\
> +	} \
> +	DEFINE_SIMPLE_ATTRIBUTE(sdhost_##PARAM_NAME##_fops,\
> +						sdhost_##PARAM_NAME##_get,\
> +						sdhost_##PARAM_NAME##_set,\
> +						"%llu\n")
> +
> +SDHOST_ATTR(write_delay);
> +SDHOST_ATTR(read_pos_delay);
> +SDHOST_ATTR(read_neg_delay);
> +
> +void sdhost_add_debugfs(struct sdhost_host *host)
> +{
> +	struct dentry *root;
> +
> +	root = debugfs_create_dir(host->device_name, NULL);
> +	if (IS_ERR(root))
> +		/* Don't complain -- debugfs just isn't enabled */
> +		return;
> +	if (!root)
> +		return;
> +
> +	host->debugfs_root = root;
> +
> +	if (!debugfs_create_file("basic_resource", S_IRUSR, root,
> +				(void *)host, &sdhost_param_fops))
> +		goto err;
> +	if (!debugfs_create_file("write_delay", S_IRUSR | S_IWUSR, root,
> +				(void *)host, &sdhost_write_delay_fops))
> +		goto err;
> +	if (!debugfs_create_file("read_pos_delay", S_IRUSR | S_IWUSR, root,
> +				(void *)host, &sdhost_read_pos_delay_fops))
> +		goto err;
> +	if (!debugfs_create_file("read_neg_delay", S_IRUSR | S_IWUSR, root,
> +				(void *)host, &sdhost_read_neg_delay_fops))
> +		goto err;
> +	return;
> +
> +err:
> +	debugfs_remove_recursive(root);
> +	host->debugfs_root = 0;
> +}
> +
> +void dump_sdio_reg(struct sdhost_host *host)
> +{
> +	unsigned int i;
> +
> +	if (!host->mmc->card)
> +		return;
> +
> +	pr_info("sdhost" ": =========== REGISTER DUMP (%s)========\n",
> +		host->device_name);
> +
> +	for (i = 0; i < 0x09; i++) {
> +		pr_info("sdhost" ": 0x%08x | 0x%08x | 0x%08x | 0x%08x\n\r",
> +		       _sdhost_readl(host->ioaddr, 0 + (i << 4)),
> +		       _sdhost_readl(host->ioaddr, 4 + (i << 4)),
> +		       _sdhost_readl(host->ioaddr, 8 + (i << 4)),
> +		       _sdhost_readl(host->ioaddr, 12 + (i << 4))
> +		    );
> +	}
> +
> +	pr_info("sdhost" ": ==================================\n");
> +	mdelay(100);
> +}
> diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.h b/drivers/mmc/host/sprd_sdhost_debugfs.h
> new file mode 100644
> index 0000000..0063e1b
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost_debugfs.h
> @@ -0,0 +1,27 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost_debugfs.h - Secure Digital Host Controller
> + * Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +
> +#ifndef _SDHOST_DEBUGFS_H_
> +#define _SDHOST_DEBUGFS_H_
> +
> +#include "sprd_sdhost.h"
> +
> +#ifdef CONFIG_DEBUG_FS
> +void sdhost_add_debugfs(struct sdhost_host *host);
> +void dump_sdio_reg(struct sdhost_host *host);
> +#else
> +static inline void sdhost_add_debugfs(struct sdhost_host *host) {}
> +static inline void dump_sdio_reg(struct sdhost_host *host) {}
> +#endif
> +
> +#endif
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Jaehoon Chung]

Hi, 

Is sdhost based on SDHCI controller?
Why don't use sdhci.c? Is there any reason?

Best Regards,
Jaehoon Chung

On 07/01/2015 04:12 PM, Chunyan Zhang wrote:
> From: Billows Wu <billows.wu@spreadtrum.com>
> 
> The Spreadtrum MMC host driver is used to support EMMC, SD, and
> SDIO types of memory cards.
> 
> Signed-off-by: Billows Wu <billows.wu@spreadtrum.com>
> Reviewed-by: Orson Zhai <orson.zhai@spreadtrum.com>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> ---
>  drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
>  drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
>  drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
>  drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
>  6 files changed, 2027 insertions(+)
>  create mode 100644 drivers/mmc/host/sprd_sdhost.c
>  create mode 100644 drivers/mmc/host/sprd_sdhost.h
>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h
> 
> diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
> new file mode 100644
> index 0000000..e7a66e8
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost.c
> @@ -0,0 +1,1270 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
> + * Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/highmem.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/scatterlist.h>
> +
> +#include "sprd_sdhost.h"
> +#include "sprd_sdhost_debugfs.h"
> +
> +#define DRIVER_NAME "sdhost"
> +#define SDHOST_CAPS \
> +		(MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
> +		MMC_CAP_ERASE |	 MMC_CAP_UHS_SDR50 | \
> +		MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
> +
> +struct sdhost_caps_data {
> +	char *name;
> +	uint32_t ocr_avail;
> +	uint32_t caps;
> +	uint32_t caps2;
> +	uint32_t pm_caps;
> +	/* TODO: we will obtain these values from regulator and clock
> +	 * phandles after LDO and clock function is OK
> +	 */
> +	uint32_t base_clk;
> +	uint32_t signal_default_voltage;
> +};
> +
> +struct sdhost_caps_data sd_caps_info = {
> +	.name = "sd",
> +	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
> +	.caps = SDHOST_CAPS,
> +	.caps2 = MMC_CAP2_HC_ERASE_SZ,
> +	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
> +	.base_clk = 192000000,
> +	.signal_default_voltage = 3000000,
> +};
> +
> +struct sdhost_caps_data wifi_caps_info = {
> +	.name = "wifi",
> +	.ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
> +	    MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
> +	.caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,
> +	.pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
> +	.base_clk = 76000000,
> +};
> +
> +struct sdhost_caps_data emmc_caps_info = {
> +	.name = "emmc",
> +	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
> +	.caps = SDHOST_CAPS |
> +	    MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
> +	    MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
> +	.caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
> +	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
> +	.base_clk = 192000000,
> +	.signal_default_voltage = 1800000,
> +};
> +
> +const struct of_device_id sdhost_of_match[] = {
> +	{.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
> +	{.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
> +	{.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
> +	{ /* sentinel */ }
> +};
> +
> +void _reset_ios(struct sdhost_host *host)
> +{
> +	_sdhost_disable_all_int(host->ioaddr);
> +
> +	host->ios.clock = 0;
> +	host->ios.vdd = 0;
> +	/* host->ios.bus_mode    = MMC_BUSMODE_OPENDRAIN; */
> +	/* host->ios.chip_select = MMC_CS_DONTCARE; */
> +	host->ios.power_mode = MMC_POWER_OFF;
> +	host->ios.bus_width = MMC_BUS_WIDTH_1;
> +	host->ios.timing = MMC_TIMING_LEGACY;
> +	host->ios.signal_voltage = MMC_SIGNAL_VOLTAGE_330;
> +	/*host->ios.drv_type    = MMC_SET_DRIVER_TYPE_B; */
> +
> +	_sdhost_reset(host->ioaddr, _RST_ALL);
> +	_sdhost_set_delay(host->ioaddr, host->write_delay,
> +			  host->read_pos_delay, host->read_neg_delay);
> +}
> +
> +int __local_pm_suspend(struct sdhost_host *host)
> +{
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&host->lock, flags);
> +	_sdhost_disable_all_int(host->ioaddr);
> +	_sdhost_all_clk_off(host->ioaddr);
> +	clk_disable(host->clk);
> +	/* wake lock */
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	clk_unprepare(host->clk);
> +	synchronize_irq(host->irq);
> +
> +	return 0;
> +}
> +
> +int __local_pm_resume(struct sdhost_host *host)
> +{
> +	unsigned long flags;
> +
> +	clk_prepare(host->clk);
> +	spin_lock_irqsave(&host->lock, flags);
> +	clk_enable(host->clk);
> +	if (host->ios.clock) {
> +		_sdhost_sd_clk_off(host->ioaddr);
> +		_sdhost_clk_set_and_on(host->ioaddr,
> +				       _sdhost_calc_div(host->base_clk,
> +							host->ios.clock));
> +		_sdhost_sd_clk_on(host->ioaddr);
> +	}
> +	spin_unlock_irqrestore(&host->lock, flags);
> +
> +	return 0;
> +}
> +
> +void pm_runtime_setting(struct platform_device *pdev, struct sdhost_host *host)
> +{
> +	pm_runtime_set_active(&pdev->dev);
> +#ifdef CONFIG_PM_RUNTIME
> +	pm_suspend_ignore_children(&pdev->dev, true);
> +#endif
> +	pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
> +	pm_runtime_use_autosuspend(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +}
> +
> +int _runtime_get(struct sdhost_host *host)
> +{
> +	return pm_runtime_get_sync(host->mmc->parent);
> +}
> +
> +int _runtime_put(struct sdhost_host *host)
> +{
> +	pm_runtime_mark_last_busy(host->mmc->parent);
> +	return pm_runtime_put_autosuspend(host->mmc->parent);
> +}
> +
> +int _runtime_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev =
> +	    container_of(dev, struct platform_device, dev);
> +	struct sdhost_host *host = platform_get_drvdata(pdev);
> +
> +	return __local_pm_suspend(host);
> +}
> +
> +int _runtime_resume(struct device *dev)
> +{
> +	struct platform_device *pdev =
> +	    container_of(dev, struct platform_device, dev);
> +	struct sdhost_host *host = platform_get_drvdata(pdev);
> +
> +	return __local_pm_resume(host);
> +}
> +
> +int _runtime_idle(struct device *dev)
> +{
> +	return 0;
> +}
> +
> +int _pm_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev =
> +	    container_of(dev, struct platform_device, dev);
> +	struct sdhost_host *host = platform_get_drvdata(pdev);
> +
> +	_runtime_get(host);
> +
> +	host->mmc->pm_flags = host->mmc->pm_caps;
> +
> +	pr_debug("%s(%s):\n"
> +		 "sdhost clock = %d\n"
> +		 "sdhost vdd = %d\n"
> +		 "sdhost bus_mode = %d\n"
> +		 "sdhost chip_select = %d\n"
> +		 "sdhost power_mode = %d\n"
> +		 "sdhost bus_width = %d\n"
> +		 "sdhost timing = %d\n"
> +		 "sdhost signal_voltage = %d\n"
> +		 "sdhost drv_type = %d\n",
> +		 __func__, host->device_name,
> +		 host->ios.clock,
> +		 host->ios.vdd,
> +		 host->ios.bus_mode,
> +		 host->ios.chip_select,
> +		 host->ios.power_mode,
> +		 host->ios.bus_width,
> +		 host->ios.timing,
> +		 host->ios.signal_voltage, host->ios.drv_type);
> +
> +	return __local_pm_suspend(host);
> +}
> +
> +int _pm_resume(struct device *dev)
> +{
> +	struct platform_device *pdev =
> +	    container_of(dev, struct platform_device, dev);
> +	struct sdhost_host *host = platform_get_drvdata(pdev);
> +	struct mmc_ios ios;
> +
> +	__local_pm_resume(host);
> +
> +	ios = host->mmc->ios;
> +	_reset_ios(host);
> +	host->mmc->ops->set_ios(host->mmc, &ios);
> +
> +	pr_debug("%s(%s):\n"
> +		 "sdhost clock = %d\n"
> +		 "sdhost vdd = %d\n"
> +		 "sdhost bus_mode = %d\n"
> +		 "sdhost chip_select = %d\n"
> +		 "sdhost power_mode = %d\n"
> +		 "sdhost bus_width = %d\n"
> +		 "sdhost timing = %d\n"
> +		 "sdhost signal_voltage = %d\n"
> +		 "sdhost drv_type = %d\n",
> +		 __func__, host->device_name,
> +		 host->ios.clock,
> +		 host->ios.vdd,
> +		 host->ios.bus_mode,
> +		 host->ios.chip_select,
> +		 host->ios.power_mode,
> +		 host->ios.bus_width,
> +		 host->ios.timing,
> +		 host->ios.signal_voltage, host->ios.drv_type);
> +
> +	_runtime_put(host);
> +
> +	return 0;
> +}
> +
> +void __get_rsp(struct sdhost_host *host)
> +{
> +	u32 i, offset;
> +	unsigned int flags = host->cmd->flags;
> +	u32 *resp = host->cmd->resp;
> +	void __iomem *addr = host->ioaddr;
> +
> +	if (!(flags & MMC_RSP_PRESENT))
> +		return;
> +
> +	if (flags & MMC_RSP_136) {
> +		/* CRC is stripped so we need to do some shifting. */
> +		for (i = 0, offset = 12; i < 3; i++, offset -= 4) {
> +			resp[i] =
> +			    _sdhost_readl(addr, SDHOST_32_RESP + offset) << 8;
> +			resp[i] |=
> +			    _sdhost_readb(addr, SDHOST_32_RESP + offset - 1);
> +		}
> +		resp[3] = _sdhost_readl(addr, SDHOST_32_RESP) << 8;
> +	} else {
> +		resp[0] = _sdhost_readl(addr, SDHOST_32_RESP);
> +	}
> +}
> +
> +void _send_cmd(struct sdhost_host *host, struct mmc_command *cmd)
> +{
> +	struct mmc_data *data = cmd->data;
> +	int sg_cnt;
> +	u32 flag = 0;
> +	u16 rsp_type = 0;
> +	int if_has_data = 0;
> +	int if_multi = 0;
> +	int if_rd = 0;
> +	int if_dma = 0;
> +	uint16_t auto_cmd = __ACMD_DIS;
> +
> +	pr_debug("sdhost %s cmd %d, arg 0x%x, flag 0x%x\n",
> +		 host->device_name, cmd->opcode, cmd->arg, cmd->flags);
> +	if (cmd->data)
> +		pr_debug("sdhost %s block size %d, cnt %d\n",
> +			 host->device_name, cmd->data->blksz,
> +			 cmd->data->blocks);
> +
> +	_sdhost_disable_all_int(host->ioaddr);
> +
> +	if (38 == cmd->opcode) {
> +		/* if it is erase command , it's busy time will long,
> +		 * so we set long timeout value here.
> +		 */
> +		mod_timer(&host->timer, jiffies + 10 * HZ);
> +		_sdhost_writeb(host->ioaddr, __TIMEOUT_MAX_VAL,
> +			       SDHOST_8_TIMEOUT);
> +	} else {
> +		mod_timer(&host->timer, jiffies + 3 * HZ);
> +		_sdhost_writeb(host->ioaddr, host->data_time_out_val,
> +			       SDHOST_8_TIMEOUT);
> +	}
> +
> +	host->cmd = cmd;
> +	if (data) {
> +		/* set data param */
> +		WARN_ON((data->blksz * data->blocks > 524288) ||
> +		       (data->blksz > host->mmc->max_blk_size) ||
> +		       (data->blocks > 65535));
> +
> +		data->bytes_xfered = 0;
> +
> +		if_has_data = 1;
> +		if_rd = (data->flags & MMC_DATA_READ);
> +		if_multi = (mmc_op_multi(cmd->opcode) || data->blocks > 1);
> +		if (if_rd && !if_multi)
> +			flag = _DATA_FILTER_RD_SIGLE;
> +		else if (if_rd && if_multi)
> +			flag = _DATA_FILTER_RD_MULTI;
> +		else if (!if_rd && !if_multi)
> +			flag = _DATA_FILTER_WR_SIGLE;
> +		else
> +			flag = _DATA_FILTER_WR_MULT;
> +
> +		if (!host->auto_cmd_mode)
> +			flag |= _INT_ERR_ACMD;
> +
> +		if_dma = 1;
> +		auto_cmd = host->auto_cmd_mode;
> +		_sdhost_set_blk_size(host->ioaddr, data->blksz);
> +
> +		sg_cnt = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
> +				    (data->flags & MMC_DATA_READ) ?
> +				    DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +		if (1 == sg_cnt) {
> +			_sdhost_set_dma(host->ioaddr, __SDMA_MOD);
> +			_sdhost_set_16_blk_cnt(host->ioaddr, data->blocks);
> +			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
> +				       SDHOST_32_SYS_ADDR);
> +		} else {
> +			WARN_ON(1);
> +			flag |= _INT_ERR_ADMA;
> +			_sdhost_set_dma(host->ioaddr, __32_ADMA_MOD);
> +			_sdhost_set_32_blk_cnt(host->ioaddr, data->blocks);
> +			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
> +				       SDHOST_32_SYS_ADDR);
> +		}
> +	} else {
> +		/* _sdhost_set_trans_mode(host->ioaddr,
> +		 * 0, 0, __ACMD_DIS, 0, 0);
> +		 */
> +	}
> +
> +	_sdhost_writel(host->ioaddr, cmd->arg, SDHOST_32_ARG);
> +	switch (mmc_resp_type(cmd)) {
> +	case MMC_RSP_R1B:
> +		rsp_type = _RSP1B_5B;
> +		flag |= _CMD_FILTER_R1B;
> +		break;
> +	case MMC_RSP_NONE:
> +		rsp_type = _RSP0;
> +		flag |= _CMD_FILTER_R0;
> +		break;
> +	case MMC_RSP_R2:
> +		rsp_type = _RSP2;
> +		flag |= _CMD_FILTER_R2;
> +		break;
> +
> +	case MMC_RSP_R4:
> +		rsp_type = _RSP3_4;
> +		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
> +		break;
> +
> +	case MMC_RSP_R1:
> +	case MMC_RSP_R1 & ~MMC_RSP_CRC:
> +		rsp_type = _RSP1_5_6_7;
> +		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
> +		break;
> +
> +	default:
> +		WARN_ON(1);
> +		break;
> +	}
> +
> +	host->int_filter = flag;
> +	_sdhost_enable_int(host->ioaddr, flag);
> +	pr_debug("sdhost %s cmd:%d rsp:%d intflag:0x%x\n"
> +		 "if_multi:0x%x if_rd:0x%x auto_cmd:0x%x if_dma:0x%x\n",
> +		 host->device_name, cmd->opcode, mmc_resp_type(cmd),
> +		 flag, if_multi, if_rd, auto_cmd, if_dma);
> +	_sdhost_set_trans_and_cmd(host->ioaddr, if_multi, if_rd, auto_cmd,
> +		if_multi, if_dma, cmd->opcode, if_has_data, rsp_type);
> +}
> +
> +void _cmd_irq(struct sdhost_host *host, u32 intmask)
> +{
> +	if (0 == intmask) {
> +		WARN_ON(1);
> +		return;
> +	}
> +
> +	if (!host->cmd) {
> +		pr_err("%s: got command interrupt 0x%08x even though no command operation was in process\n",
> +		     host->device_name, (unsigned)intmask);
> +		return;
> +	}
> +
> +	if (_INT_ERR_CMD_TIMEOUT & intmask)
> +		host->cmd->error = -ETIMEDOUT;
> +	else if ((_INT_ERR_CMD_CRC | _INT_ERR_CMD_END |
> +		  _INT_ERR_CMD_INDEX) & intmask)
> +		host->cmd->error = -EILSEQ;
> +}
> +
> +void _data_irq(struct sdhost_host *host, u32 intmask)
> +{
> +	struct mmc_command *cmd = host->cmd;
> +	struct mmc_data *data = cmd->data;
> +
> +	if (data) {
> +		/* current error is happened in data token */
> +		if (_INT_ERR_DATA_TIMEOUT & intmask)
> +			data->error = -ETIMEDOUT;
> +		else
> +			data->error = -EILSEQ;
> +	} else {
> +		/* current error is happend in response with busy */
> +		if (_INT_ERR_DATA_TIMEOUT & intmask)
> +			cmd->error = -ETIMEDOUT;
> +		else
> +			cmd->error = -EILSEQ;
> +	}
> +}
> +
> +void _trans_end_irq(struct sdhost_host *host, u32 intmask)
> +{
> +	struct mmc_command *cmd = host->cmd;
> +	struct mmc_data *data = cmd->data;
> +
> +	if (data) {
> +		dma_unmap_sg(mmc_dev(host->mmc),
> +			     data->sg, data->sg_len,
> +			     (data->flags & MMC_DATA_READ) ?
> +			     DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +		data->error = 0;
> +		data->bytes_xfered = data->blksz * data->blocks;
> +	} else {
> +		/* R1B also can produce transferComplete interrupt */
> +		cmd->error = 0;
> +	}
> +}
> +
> +int _err_irq_handle(struct sdhost_host *host, u32 intmask)
> +{
> +	int ret = 1;
> +	struct mmc_request *mrq = host->mrq;
> +	struct mmc_command *cmd = host->cmd;
> +	struct mmc_data *data = cmd->data;
> +
> +	/* some error happened in command */
> +	_cmd_irq(host, intmask & _INT_FILTER_ERR);
> +	if (_INT_FILTER_ERR_DATA & intmask)
> +		/* some error happened in data token or command with R1B */
> +		_data_irq(host, intmask);
> +
> +	if (_INT_ERR_ACMD & intmask)
> +		/* Auto cmd12 and cmd23 error is belong to data token error */
> +		data->error = -EILSEQ;
> +
> +	if (_INT_ERR_ADMA & intmask)
> +		data->error = -EIO;
> +
> +	/* for debug */
> +	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
> +	dump_sdio_reg(host);
> +	_sdhost_disable_all_int(host->ioaddr);
> +
> +	/* if current error happened in data token we send cmd12 to stop it*/
> +	if ((mrq->cmd == cmd) && (mrq->stop)) {
> +		_sdhost_reset(host->ioaddr,
> +			_RST_CMD | _RST_DATA);
> +		_send_cmd(host, mrq->stop);
> +	} else {
> +		/* request finish with error, so reset it
> +		 * and stop the request
> +		 */
> +		_sdhost_reset(host->ioaddr,
> +			_RST_CMD | _RST_DATA);
> +		tasklet_schedule(&host->finish_tasklet);
> +	}
> +
> +	return ret;
> +}
> +
> +int _normal_irq_handle(struct sdhost_host *host, u32 intmask)
> +{
> +	int ret = 0;
> +	struct mmc_request *mrq = host->mrq;
> +	struct mmc_command *cmd = host->cmd;
> +
> +	/* delete irq that wanted in filter */
> +	/* _sdhost_clear_int(host->ioaddr,
> +	 *_INT_FILTER_NORMAL & intmask);
> +	 */
> +	host->int_filter &= ~(_INT_FILTER_NORMAL & intmask);
> +	if (_INT_DMA_END & intmask)
> +		_sdhost_writel(host->ioaddr,
> +			_sdhost_readl(host->ioaddr,
> +				SDHOST_32_SYS_ADDR),
> +				SDHOST_32_SYS_ADDR);
> +
> +	if (_INT_CMD_END & intmask) {
> +		cmd->error = 0;
> +		__get_rsp(host);
> +	}
> +	if (_INT_TRAN_END & intmask)
> +		_trans_end_irq(host, intmask);
> +	if (!(_INT_FILTER_NORMAL & host->int_filter)) {
> +		/* current cmd finished */
> +		_sdhost_disable_all_int(host->ioaddr);
> +		_sdhost_reset(host->ioaddr,
> +			_RST_CMD | _RST_DATA);
> +		if (mrq->sbc == cmd) {
> +			_send_cmd(host, mrq->cmd);
> +		} else if ((mrq->cmd == host->cmd)
> +			&& (mrq->stop)) {
> +				_send_cmd(host, mrq->stop);
> +		} else {
> +			/* finish with success and stop the
> +			 * request
> +			 */
> +			tasklet_schedule(&host->finish_tasklet);
> +			ret = 1;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +irqreturn_t _irq_func(int irq, void *param)
> +{
> +	u32 intmask;
> +	struct sdhost_host *host = (struct sdhost_host *)param;
> +	struct mmc_request *mrq = host->mrq;
> +	struct mmc_command *cmd = host->cmd;
> +	struct mmc_data *data;
> +
> +	spin_lock(&host->lock);
> +	/* maybe _timeout_func run in one core and _irq_func run in
> +	 * another core, this will panic if access cmd->data
> +	 */
> +	if ((!mrq) || (!cmd)) {
> +		spin_unlock(&host->lock);
> +		return IRQ_NONE;
> +	}
> +	data = cmd->data;
> +
> +	intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
> +	if (!intmask) {
> +		spin_unlock(&host->lock);
> +		return IRQ_NONE;
> +	}
> +	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
> +
> +	/* disable unused interrupt */
> +	_sdhost_clear_int(host->ioaddr, intmask);
> +	/* just care about the interrupt that we want */
> +	intmask &= host->int_filter;
> +
> +	while (intmask) {
> +		int ret;
> +
> +		if (_INT_FILTER_ERR & intmask) {
> +			ret = _err_irq_handle(host, intmask);
> +			if (ret)
> +				goto out;
> +		} else {
> +			ret = _normal_irq_handle(host, intmask);
> +			if (ret)
> +				goto out;
> +		}
> +
> +		intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
> +		_sdhost_clear_int(host->ioaddr, intmask);
> +		intmask &= host->int_filter;
> +	};
> +
> +out:
> +	spin_unlock(&host->lock);
> +	return IRQ_HANDLED;
> +}
> +
> +void _tasklet_func(unsigned long param)
> +{
> +	struct sdhost_host *host = (struct sdhost_host *)param;
> +	unsigned long flags;
> +	struct mmc_request *mrq;
> +
> +	del_timer(&host->timer);
> +
> +	spin_lock_irqsave(&host->lock, flags);
> +	if (!host->mrq) {
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		return;
> +	}
> +	mrq = host->mrq;
> +	host->mrq = NULL;
> +	host->cmd = NULL;
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +
> +	pr_debug("sdhost %s cmd %d data %d\n",
> +		 host->device_name, mrq->cmd->error,
> +		 ((!!mrq->cmd->data) ? mrq->cmd->data->error : 0));
> +	mmc_request_done(host->mmc, mrq);
> +	_runtime_put(host);
> +}
> +
> +void _timeout_func(unsigned long data)
> +{
> +	struct sdhost_host *host = (struct sdhost_host *)data;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&host->lock, flags);
> +	if (host->mrq) {
> +		pr_info("sdhost %s Timeout waiting for hardware interrupt!\n",
> +			host->device_name);
> +		dump_sdio_reg(host);
> +		if (host->cmd->data)
> +			host->cmd->data->error = -ETIMEDOUT;
> +		else if (host->cmd)
> +			host->cmd->error = -ETIMEDOUT;
> +		else
> +			host->mrq->cmd->error = -ETIMEDOUT;
> +
> +		_sdhost_disable_all_int(host->ioaddr);
> +		_sdhost_reset(host->ioaddr, _RST_CMD | _RST_DATA);
> +		tasklet_schedule(&host->finish_tasklet);
> +	}
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +}
> +
> +void sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	host->mrq = mrq;
> +	/* 1 find whether card is still in slot */
> +	if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE)) {
> +		if (!mmc_gpio_get_cd(host->mmc)) {
> +			mrq->cmd->error = -ENOMEDIUM;
> +			tasklet_schedule(&host->finish_tasklet);
> +			mmiowb();
> +			spin_unlock_irqrestore(&host->lock, flags);
> +			return;
> +		}
> +		/* else asume sdcard is present */
> +	}
> +
> +	/*
> +	 * in our control we can not use auto cmd12 and auto cmd23 together
> +	 * so in following program we use auto cmd23 prior to auto cmd12
> +	 */
> +	pr_debug("sdhost %s request %d %d %d\n",
> +		 host->device_name, !!mrq->sbc, !!mrq->cmd, !!mrq->stop);
> +	host->auto_cmd_mode = __ACMD_DIS;
> +	if (!mrq->sbc && mrq->stop && SDHOST_FLAG_EN_ACMD12) {
> +		host->auto_cmd_mode = __ACMD12;
> +		mrq->data->stop = NULL;
> +		mrq->stop = NULL;
> +	}
> +
> +	/* 3 send cmd list */
> +	if ((mrq->sbc) && SDHOST_FLAG_EN_ACMD23) {
> +		host->auto_cmd_mode = __ACMD23;
> +		_send_cmd(host, mrq->cmd);
> +	} else if (mrq->sbc)
> +		_send_cmd(host, mrq->sbc);
> +	else
> +		_send_cmd(host, mrq->cmd);
> +
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +}
> +
> +void signal_voltage_on_off(struct sdhost_host *host, uint32_t on_off)
> +{
> +	if (!host->mmc->supply.vqmmc) {
> +		pr_err("%s(%s) there is no signal voltage!\n",
> +		       __func__, host->device_name);
> +		return;
> +	}
> +
> +	if (on_off && (!host->sdio_1_8v_signal_enabled)) {
> +		if (!regulator_enable(host->mmc->supply.vqmmc) &&
> +			regulator_is_enabled(host->mmc->supply.vqmmc)) {
> +			host->sdio_1_8v_signal_enabled = true;
> +			pr_info("%s(%s) signal voltage enable success!\n",
> +					__func__, host->device_name);
> +		} else
> +			pr_err("%s(%s) signal voltage enable fail!\n",
> +				__func__, host->device_name);
> +
> +	} else if (!on_off && host->sdio_1_8v_signal_enabled) {
> +		if (!regulator_disable(host->mmc->supply.vqmmc) &&
> +			!regulator_is_enabled(host->mmc->supply.vqmmc)) {
> +			host->sdio_1_8v_signal_enabled = false;
> +			pr_info("%s(%s) signal voltage disable success!\n",
> +				__func__, host->device_name);
> +		} else
> +			pr_err("%s(%s) signal voltage disable fail\n",
> +				__func__, host->device_name);
> +	}
> +}
> +
> +/*
> + * 1 This votage is always poweron
> + * 2 initial votage is 2.7v~3.6v
> + * 3 It can be reconfig to 1.7v~1.95v
> + */
> +int sdhost_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +	int err;
> +
> +	pr_debug("%s(%s) vqmmc:\n"
> +		 "sdhost clock = %d-->%d\n"
> +		 "sdhost vdd = %d-->%d\n"
> +		 "sdhost bus_mode = %d-->%d\n"
> +		 "sdhost chip_select = %d-->%d\n"
> +		 "sdhost power_mode = %d-->%d\n"
> +		 "sdhost bus_width = %d-->%d\n"
> +		 "sdhost timing = %d-->%d\n"
> +		 "sdhost signal_voltage = %d-->%d\n"
> +		 "sdhost drv_type = %d-->%d\n",
> +		 __func__, host->device_name,
> +		 host->ios.clock, ios->clock,
> +		 host->ios.vdd, ios->vdd,
> +		 host->ios.bus_mode, ios->bus_mode,
> +		 host->ios.chip_select, ios->chip_select,
> +		 host->ios.power_mode, ios->power_mode,
> +		 host->ios.bus_width, ios->bus_width,
> +		 host->ios.timing, ios->timing,
> +		 host->ios.signal_voltage, ios->signal_voltage,
> +		 host->ios.drv_type, ios->drv_type);
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	if (!mmc->supply.vqmmc) {
> +		/* there are no 1.8v signal votage. */
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		_runtime_put(host);
> +		/* err = -EINVAL; */
> +		err = 0;
> +		pr_err("sdhost %s There is no signalling voltage\n",
> +		       host->device_name);
> +		return err;
> +	}
> +
> +	/* I/O power supply */
> +	if (ios->signal_voltage == host->ios.signal_voltage) {
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		_runtime_put(host);
> +		return 0;
> +	}
> +
> +	switch (ios->signal_voltage) {
> +	case MMC_SIGNAL_VOLTAGE_330:
> +		err = regulator_set_voltage(mmc->supply.vqmmc,
> +					    3000000, 3000000);
> +		break;
> +	case MMC_SIGNAL_VOLTAGE_180:
> +		err = regulator_set_voltage(mmc->supply.vqmmc,
> +					    1800000, 1800000);
> +		break;
> +	case MMC_SIGNAL_VOLTAGE_120:
> +		err = regulator_set_voltage(mmc->supply.vqmmc,
> +					    1100000, 1300000);
> +		break;
> +	default:
> +		err = -EIO;
> +		break;
> +	}
> +	if (likely(!err))
> +		host->ios.signal_voltage = ios->signal_voltage;
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +
> +	WARN(err, "Switching to signalling voltage  failed\n");
> +	return err;
> +}
> +
> +void sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +
> +	pr_debug("%s(%s) ios:\n"
> +		 "sdhost clock = %d-->%d\n"
> +		 "sdhost vdd = %d-->%d\n"
> +		 "sdhost bus_mode = %d-->%d\n"
> +		 "sdhost chip_select = %d-->%d\n"
> +		 "sdhost power_mode = %d-->%d\n"
> +		 "sdhost bus_width = %d-->%d\n"
> +		 "sdhost timing = %d-->%d\n"
> +		 "sdhost signal_voltage = %d-->%d\n"
> +		 "sdhost drv_type = %d-->%d\n",
> +		 __func__, host->device_name,
> +		 host->ios.clock, ios->clock,
> +		 host->ios.vdd, ios->vdd,
> +		 host->ios.bus_mode, ios->bus_mode,
> +		 host->ios.chip_select, ios->chip_select,
> +		 host->ios.power_mode, ios->power_mode,
> +		 host->ios.bus_width, ios->bus_width,
> +		 host->ios.timing, ios->timing,
> +		 host->ios.signal_voltage, ios->signal_voltage,
> +		 host->ios.drv_type, ios->drv_type);
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +	dump_sdio_reg(host);
> +
> +	if (0 == ios->clock) {
> +		_sdhost_all_clk_off(host->ioaddr);
> +		host->ios.clock = 0;
> +	} else if (ios->clock != host->ios.clock) {
> +		uint32_t div;
> +
> +		div = _sdhost_calc_div(host->base_clk, ios->clock);
> +		_sdhost_sd_clk_off(host->ioaddr);
> +		_sdhost_clk_set_and_on(host->ioaddr, div);
> +		_sdhost_sd_clk_on(host->ioaddr);
> +		host->ios.clock = ios->clock;
> +		host->data_time_out_val =
> +			_sdhost_calc_timeout(host->base_clk, div, 3);
> +	}
> +
> +	if (ios->power_mode != host->ios.power_mode) {
> +		switch (ios->power_mode) {
> +		case MMC_POWER_OFF:
> +			signal_voltage_on_off(host, 0);
> +			if (mmc->supply.vmmc)
> +				mmc_regulator_set_ocr(host->mmc,
> +					mmc->supply.vmmc, 0);
> +			_reset_ios(host);
> +			host->ios.power_mode = ios->power_mode;
> +			break;
> +		case MMC_POWER_ON:
> +		case MMC_POWER_UP:
> +			if (mmc->supply.vmmc)
> +				mmc_regulator_set_ocr(host->mmc,
> +					mmc->supply.vmmc, ios->vdd);
> +			signal_voltage_on_off(host, 1);
> +			host->ios.power_mode = ios->power_mode;
> +			host->ios.vdd = ios->vdd;
> +			break;
> +		default:
> +			break;
> +		}
> +	}
> +
> +	/* flash power voltage select */
> +	if (ios->vdd != host->ios.vdd) {
> +		if (mmc->supply.vmmc) {
> +			pr_info("sdhost %s 3.0 %d!\n",
> +				host->device_name, ios->vdd);
> +			mmc_regulator_set_ocr(host->mmc,
> +					mmc->supply.vmmc, ios->vdd);
> +		}
> +		host->ios.vdd = ios->vdd;
> +	}
> +
> +	if (ios->bus_width != host->ios.bus_width) {
> +		_sdhost_set_buswidth(host->ioaddr, ios->bus_width);
> +		host->ios.bus_width = ios->bus_width;
> +	}
> +
> +	if (ios->timing != host->ios.timing) {
> +		/* 1 first close SD clock */
> +		_sdhost_sd_clk_off(host->ioaddr);
> +		/* 2 set timing mode */
> +		switch (ios->timing) {	/* timing specification used */
> +		case MMC_TIMING_LEGACY:
> +			/*basic clock mode */
> +			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
> +			break;
> +		case MMC_TIMING_MMC_HS:
> +		case MMC_TIMING_SD_HS:
> +			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
> +			break;
> +		case MMC_TIMING_UHS_SDR12:
> +		case MMC_TIMING_UHS_SDR25:
> +		case MMC_TIMING_UHS_SDR50:
> +		case MMC_TIMING_UHS_SDR104:
> +		case MMC_TIMING_UHS_DDR50:
> +		case MMC_TIMING_MMC_HS200:
> +			/* _sdhost_enable_hispd(host->ioaddr); */
> +			_sdhost_set_uhs_mode(host->ioaddr, ios->timing -
> +				MMC_TIMING_UHS_SDR12 + __TIMING_MODE_SDR12);
> +			break;
> +		default:
> +			break;
> +		}
> +		/* 3 open SD clock */
> +		_sdhost_sd_clk_on(host->ioaddr);
> +		host->ios.timing = ios->timing;
> +	}
> +
> +	mdelay(100);
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +}
> +
> +int sdhost_get_ro(struct mmc_host *mmc)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +	/*read & write */
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +	return 0;
> +}
> +
> +int sdhost_get_cd(struct mmc_host *mmc)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +	int gpio_cd;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	if (host->mmc->caps & MMC_CAP_NONREMOVABLE) {
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		_runtime_put(host);
> +		return 1;
> +	}
> +
> +	gpio_cd = mmc_gpio_get_cd(host->mmc);
> +	if (IS_ERR_VALUE(gpio_cd))
> +		gpio_cd = 1;
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +	return !!gpio_cd;
> +}
> +
> +int sdhost_card_busy(struct mmc_host *mmc)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +	u32 present_state;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	/* Check whether DAT[3:0] is 0000 */
> +	present_state = _sdhost_readl(host->ioaddr, SDHOST_32_PRES_STATE);
> +
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +
> +	return !(present_state & _DAT_LVL_MASK);
> +}
> +
> +void sdhost_hw_reset(struct mmc_host *mmc)
> +{
> +	struct sdhost_host *host = mmc_priv(mmc);
> +	unsigned long flags;
> +
> +	_runtime_get(host);
> +	spin_lock_irqsave(&host->lock, flags);
> +
> +	/* close LDO and open LDO again. */
> +	signal_voltage_on_off(host, 0);
> +	if (mmc->supply.vmmc)
> +		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
> +	mdelay(50);
> +	if (mmc->supply.vmmc)
> +		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc,
> +				      host->ios.vdd);
> +
> +	signal_voltage_on_off(host, 1);
> +	mdelay(50);
> +	mmiowb();
> +	spin_unlock_irqrestore(&host->lock, flags);
> +	_runtime_put(host);
> +
> +}
> +
> +const struct mmc_host_ops sdhost_ops = {
> +	.request = sdhost_request,
> +	.set_ios = sdhost_set_ios,
> +	.get_ro = sdhost_get_ro,
> +	.get_cd = sdhost_get_cd,
> +
> +	.start_signal_voltage_switch = sdhost_set_vqmmc,
> +	.card_busy = sdhost_card_busy,
> +	.hw_reset = sdhost_hw_reset,
> +};
> +
> +void get_caps_info(struct sdhost_host *host, struct sdhost_caps_data *pdata)
> +{
> +	host->device_name = pdata->name;
> +	host->ocr_avail = pdata->ocr_avail;
> +	host->caps = pdata->caps;
> +	host->caps2 = pdata->caps2;
> +	host->pm_caps = pdata->pm_caps;
> +	host->base_clk = pdata->base_clk;
> +	host->signal_default_voltage = pdata->signal_default_voltage;
> +}
> +
> +int get_basic_resource(struct platform_device *pdev, struct sdhost_host *host)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct resource *res;
> +	uint32_t sdhost_delay[3];
> +	struct sdhost_caps_data *pdata;
> +	const struct of_device_id *of_id;
> +	int ret;
> +
> +	of_id = of_match_node(sdhost_of_match, np);
> +	if (!of_id) {
> +		dev_err(&pdev->dev, "failed to match node\n");
> +		return -ENODEV;
> +	}
> +	pdata = (struct sdhost_caps_data *)of_id->data;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return -ENOENT;
> +
> +	host->ioaddr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> +	host->mapbase = res->start;
> +	host->irq = platform_get_irq(pdev, 0);
> +	if (host->irq < 0)
> +		return host->irq;
> +
> +#if 0
> +	host->clk = of_clk_get(np, 0);
> +	if (IS_ERR_OR_NULL(host->clk))
> +		return PTR_ERR(host->clk);
> +
> +	host->clk_parent = of_clk_get(np, 1);
> +	if (IS_ERR_OR_NULL(host->clk_parent))
> +		return PTR_ERR(host->clk_parent);
> +#endif
> +
> +	get_caps_info(host, pdata);
> +	host->detect_gpio = of_get_named_gpio(np, "cd-gpios", 0);
> +	if (!gpio_is_valid(host->detect_gpio))
> +		host->detect_gpio = -1;
> +
> +	ret = of_property_read_u32_array(np, "sprd,delay", sdhost_delay, 3);
> +	if (!ret) {
> +		host->write_delay = sdhost_delay[0];
> +		host->read_pos_delay = sdhost_delay[1];
> +		host->read_neg_delay = sdhost_delay[2];
> +	} else
> +		dev_err(&pdev->dev, "can not read the property of sprd delay\n");
> +
> +	return 0;
> +}
> +
> +int get_external_resource(struct sdhost_host *host)
> +{
> +	int err;
> +	struct mmc_host *mmc = host->mmc;
> +
> +	host->dma_mask = DMA_BIT_MASK(64);
> +	host->data_time_out_val = 0;
> +
> +	/* 1 LDO */
> +	mmc_regulator_get_supply(mmc);
> +	if (IS_ERR_OR_NULL(mmc->supply.vmmc)) {
> +		pr_err("%s(%s): no vmmc regulator found\n",
> +		       __func__, host->device_name);
> +		mmc->supply.vmmc = NULL;
> +	}
> +	if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) {
> +		pr_err("%s(%s): no vqmmc regulator found\n",
> +		       __func__, host->device_name);
> +		mmc->supply.vqmmc = NULL;
> +	} else {
> +		regulator_is_supported_voltage(mmc->supply.vqmmc,
> +			host->signal_default_voltage,
> +			host->signal_default_voltage);
> +		regulator_set_voltage(mmc->supply.vqmmc,
> +			host->signal_default_voltage,
> +			host->signal_default_voltage);
> +	}
> +	host->mmc = mmc;
> +
> +#if 0
> +	/* 2 clock */
> +	clk_set_parent(host->clk, host->clk_parent);
> +	clk_prepare_enable(host->clk);
> +#endif
> +	/* 3 reset sdio */
> +	_reset_ios(host);
> +	err = devm_request_irq(&host->pdev->dev, host->irq, _irq_func,
> +			       IRQF_SHARED, mmc_hostname(host->mmc), host);
> +	if (err)
> +		return err;
> +	tasklet_init(&host->finish_tasklet, _tasklet_func, (unsigned long)host);
> +	/* 4 init timer */
> +	setup_timer(&host->timer, _timeout_func, (unsigned long)host);
> +
> +	return 0;
> +}
> +
> +int set_mmc_struct(struct sdhost_host *host, struct mmc_host *mmc)
> +{
> +	int ret = 0;
> +
> +	mmc = host->mmc;
> +	mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
> +	mmc->ops = &sdhost_ops;
> +	mmc->f_max = host->base_clk;
> +	mmc->f_min = (unsigned int)(host->base_clk / __CLK_MAX_DIV);
> +	mmc->max_busy_timeout = (1 << 27) / (host->base_clk / 1000);
> +
> +	mmc->caps = host->caps;
> +	mmc->caps2 = host->caps2;
> +	mmc->pm_caps = host->pm_caps;
> +	mmc->pm_flags = host->pm_caps;
> +	mmc->ocr_avail = host->ocr_avail;
> +	mmc->ocr_avail_sdio = host->ocr_avail;
> +	mmc->ocr_avail_sd = host->ocr_avail;
> +	mmc->ocr_avail_mmc = host->ocr_avail;
> +	mmc->max_current_330 = SDHOST_MAX_CUR;
> +	mmc->max_current_300 = SDHOST_MAX_CUR;
> +	mmc->max_current_180 = SDHOST_MAX_CUR;
> +
> +	mmc->max_segs = 1;
> +	mmc->max_req_size = 524288;	/* 512k */
> +	mmc->max_seg_size = mmc->max_req_size;
> +
> +	mmc->max_blk_size = 512;
> +	mmc->max_blk_count = 65535;
> +
> +	ret = mmc_of_parse(mmc);
> +	if (ret) {
> +		mmc_free_host(mmc);
> +		pr_info("parse sprd %s controller fail\n", host->device_name);
> +		return ret;
> +	}
> +
> +	pr_info("%s(%s): ocr avail = 0x%x\n"
> +		"base clock = %u, pm_caps = 0x%x\n"
> +		"caps: 0x%x, caps2: 0x%x\n",
> +		__func__, host->device_name, mmc->ocr_avail,
> +		host->base_clk, host->pm_caps, mmc->caps, mmc->caps2);
> +
> +	return ret;
> +}
> +
> +int sdhost_probe(struct platform_device *pdev)
> +{
> +	struct mmc_host *mmc;
> +	struct sdhost_host *host;
> +	int ret;
> +
> +	/* globe resource */
> +	mmc = mmc_alloc_host(sizeof(struct sdhost_host), &pdev->dev);
> +	if (!mmc) {
> +		dev_err(&pdev->dev, "no memory for MMC host\n");
> +		return -ENOMEM;
> +	}
> +
> +	host = mmc_priv(mmc);
> +	host->mmc = mmc;
> +	host->pdev = pdev;
> +	spin_lock_init(&host->lock);
> +	platform_set_drvdata(pdev, host);
> +
> +	/* get sdio irq and sdio iomem */
> +	ret = get_basic_resource(pdev, host);
> +	if (ret) {
> +		dev_err(&pdev->dev, "fail to get basic resource: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = get_external_resource(host);
> +	if (ret) {
> +		dev_err(&pdev->dev, "fail to get external resource: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = set_mmc_struct(host, mmc);
> +	if (ret) {
> +		dev_err(&pdev->dev, "fail to set mmc struct: %d\n", ret);
> +		return ret;
> +	}
> +
> +	pm_runtime_setting(pdev, host);
> +
> +	/*add host */
> +	mmiowb();
> +	ret = mmc_add_host(mmc);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret);
> +		mmc_free_host(mmc);
> +	}
> +
> +	if (-1 != host->detect_gpio)
> +		mmc_gpio_request_cd(mmc, host->detect_gpio, 0);
> +
> +	sdhost_add_debugfs(host);
> +
> +	dev_info(&pdev->dev,
> +		 "Spreadtrum %s host controller at 0x%08lx irq %d\n",
> +		 host->device_name, host->mapbase, host->irq);
> +
> +	return ret;
> +}
> +
> +void sdhost_shutdown(struct platform_device *pdev)
> +{
> +}
> +
> +const struct dev_pm_ops sdhost_dev_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(_pm_suspend, _pm_resume)
> +	SET_RUNTIME_PM_OPS(_runtime_suspend,
> +			       _runtime_resume, _runtime_idle)
> +};
> +
> +MODULE_DEVICE_TABLE(of, sdhost_of_match);
> +
> +struct platform_driver sdhost_driver = {
> +	.probe = sdhost_probe,
> +	.shutdown = sdhost_shutdown,
> +	.driver = {
> +		   .owner = THIS_MODULE,
> +		   .pm = &sdhost_dev_pm_ops,
> +		   .name = DRIVER_NAME,
> +		   .of_match_table = of_match_ptr(sdhost_of_match),
> +		   },
> +};
> +
> +module_platform_driver(sdhost_driver);
> +
> +MODULE_DESCRIPTION("Spreadtrum sdio host controller driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/mmc/host/sprd_sdhost.h b/drivers/mmc/host/sprd_sdhost.h
> new file mode 100644
> index 0000000..5778b6d
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost.h
> @@ -0,0 +1,507 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost.h - Secure Digital Host Controller
> + * Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +
> +#ifndef __SDHOST_H_
> +#define __SDHOST_H_
> +
> +#include <linux/clk.h>
> +#include <linux/compiler.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mmc/card.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/slot-gpio.h>
> +#include <linux/scatterlist.h>
> +#include <linux/types.h>
> +
> +/* Controller flag */
> +#define SDHOST_FLAG_EN_ACMD12	1
> +#define SDHOST_FLAG_EN_ACMD23	1
> +#define SDHOST_FLAG_USE_ADMA	1
> +
> +/* Controller registers */
> +static inline void _sdhost_writeb(void __iomem *ioadr, uint8_t val, int reg)
> +{
> +		writeb_relaxed(val, ioadr + reg);
> +}
> +static inline void _sdhost_writew(void __iomem *ioadr, uint16_t val, int reg)
> +{
> +		writew_relaxed(val, ioadr + reg);
> +}
> +static inline void _sdhost_writel(void __iomem *ioadr, uint32_t val, int reg)
> +{
> +		writel_relaxed(val, ioadr + reg);
> +}
> +static inline uint8_t _sdhost_readb(void __iomem *ioadr, int reg)
> +{
> +		return readb_relaxed(ioadr + reg);
> +}
> +static inline uint16_t _sdhost_readw(void __iomem *ioadr, int reg)
> +{
> +		return readw_relaxed(ioadr + reg);
> +}
> +static inline uint32_t _sdhost_readl(void __iomem *ioadr, int reg)
> +{
> +		return readl_relaxed(ioadr + reg);
> +}
> +#define SDHOST_32_SYS_ADDR	0x00
> +/* used in cmd23 with ADMA in sdio 3.0 */
> +#define SDHOST_32_BLK_CNT	0x00
> +#define SDHOST_16_BLK_CNT	0x06
> +
> +static inline void _sdhost_set_16_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
> +{
> +	writew_relaxed((blk_cnt & 0xFFFF), ioadr + SDHOST_16_BLK_CNT);
> +}
> +
> +static inline void _sdhost_set_32_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
> +{
> +	writel_relaxed((blk_cnt & 0xFFFFFFFF), ioadr + SDHOST_32_BLK_CNT);
> +}
> +
> +#define SDHOST_16_BLK_SIZE	0x04
> +
> +static inline void _sdhost_set_blk_size(void __iomem *ioadr, uint32_t blk_size)
> +{
> +	writew_relaxed((blk_size & 0xFFF) | 0x7000, ioadr + SDHOST_16_BLK_SIZE);
> +}
> +
> +#define SDHOST_32_ARG			0x08
> +#define SDHOST_16_TR_MODE		0x0C
> +#define __ACMD_DIS	0x00
> +#define __ACMD12	0x01
> +#define __ACMD23	0x02
> +static inline void _sdhost_set_trans_mode(
> +				void __iomem *io_addr, int if_multi,
> +				int if_read, uint16_t auto_cmd,
> +				int if_blk_cnt, int if_dma)
> +{
> +	writew_relaxed(
> +		(((if_multi ? 1 : 0) << 5) |
> +		((if_read ? 1 : 0) << 4) |
> +		(((u16)auto_cmd) << 2) |
> +		((if_blk_cnt ? 1 : 0) << 1) |
> +		((if_dma ? 1 : 0) << 0)) ,
> +		io_addr + SDHOST_16_TR_MODE);
> +}
> +
> +#define SDHOST_16_CMD			0x0E
> +#define _CMD_INDEX_CHK			0x0010
> +#define _CMD_CRC_CHK			0x0008
> +#define _CMD_RSP_NONE			0x0000
> +#define _CMD_RSP_136			0x0001
> +#define _CMD_RSP_48				0x0002
> +#define _CMD_RSP_48_BUSY		0x0003
> +#define _RSP0			0
> +#define _RSP1_5_6_7	\
> +		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48)
> +#define _RSP2 \
> +		(_CMD_CRC_CHK | _CMD_RSP_136)
> +#define _RSP3_4	\
> +		_CMD_RSP_48
> +#define _RSP1B_5B \
> +		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48_BUSY)
> +
> +static inline void _sdhost_set_cmd(
> +				void __iomem *ioadr, u32 cmd,
> +				int if_has_data, u32 rsp_type)
> +{
> +	writew_relaxed(
> +		((((u16)(cmd)) << 8) |
> +		(((if_has_data) ? 1 : 0) << 5) |
> +		((u16)(rsp_type))),
> +		(ioadr) + SDHOST_16_CMD);
> +}
> +
> +#define SDHOST_32_TR_MODE_AND_CMD		0x0C
> +
> +static inline void _sdhost_set_trans_and_cmd(
> +				void __iomem *ioadr, int if_multi,
> +				int if_read, uint16_t auto_cmd,
> +				int if_blk_cnt, int if_dma, u32 cmd,
> +				int if_has_data, u32 rsp_type)
> +{
> +	writel_relaxed(
> +		((((if_multi) ? 1 : 0) << 5) |
> +		(((if_read) ? 1 : 0) << 4) |
> +		(((u32)(auto_cmd)) << 2) |
> +		(((if_blk_cnt) ? 1 : 0) << 1) |
> +		(((if_dma) ? 1 : 0) << 0) |
> +		(((u32)(cmd)) << 24) |
> +		(((if_has_data) ? 1 : 0) << 21) |
> +		(((u32)(rsp_type)) << 16)) ,
> +		ioadr + SDHOST_32_TR_MODE_AND_CMD);
> +}
> +
> +#define SDHOST_32_RESP	0x10
> +#define SDHOST_32_PRES_STATE	0x24
> +#define  _DAT_LVL_MASK		0x00F00000
> +#define SDHOST_8_HOST_CTRL	0x28
> +#define __8_BIT_MOD		0x20
> +#define __4_BIT_MOD		0x02
> +#define __1_BIT_MOD	0x00
> +#define __SDMA_MOD		0x00
> +#define __32_ADMA_MOD	0x10
> +#define __64_ADMA_MOD	0x18
> +#define __HISPD_MOD		0x04
> +
> +static inline void _sdhost_set_buswidth(void __iomem *ioadr, uint32_t buswidth)
> +{
> +	u8 ctrl = 0;
> +
> +	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
> +	ctrl &= (~(__8_BIT_MOD | __4_BIT_MOD | __1_BIT_MOD));
> +	switch (buswidth) {
> +	case MMC_BUS_WIDTH_1:
> +		ctrl |= __1_BIT_MOD;
> +		break;
> +	case MMC_BUS_WIDTH_4:
> +		ctrl |= __4_BIT_MOD;
> +		break;
> +	case MMC_BUS_WIDTH_8:
> +		ctrl |= __8_BIT_MOD;
> +		break;
> +	default:
> +		BUG_ON(1);
> +		break;
> +	}
> +	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
> +}
> +
> +static inline void _sdhost_set_dma(void __iomem *ioadr, u8 dmaMod)
> +{
> +	u8 ctrl = 0;
> +
> +	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
> +	ctrl &= (~(__SDMA_MOD | __32_ADMA_MOD | __64_ADMA_MOD));
> +	ctrl |= dmaMod;
> +	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
> +}
> +
> +static inline void _sdhost_enable_hispd(void __iomem *ioadr)
> +{
> +	u8 ctrl = 0;
> +
> +	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
> +	ctrl |= __HISPD_MOD;
> +	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
> +}
> +
> +/*#define SDHOST_8_PWR_CTRL     0x29    */ /* not used */
> +#define SDHOST_8_BLK_GAP		0x2A	/* not used */
> +#define SDHOST_8_WACKUP_CTRL	0x2B	/* not used */
> +#define SDHOST_16_CLOCK_CTRL	0x2C
> +#define __CLK_IN_EN		0x0001
> +#define __CLK_IN_STABLE	0x0002
> +#define __CLK_SD			0x0004
> +#define __CLK_MAX_DIV		2046
> +
> +static inline void _sdhost_all_clk_off(void __iomem *ioadr)
> +{
> +	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
> +}
> +
> +static inline void _sdhost_sd_clk_off(void __iomem *ioadr)
> +{
> +	u16 ctrl = 0;
> +
> +	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
> +	ctrl &= (~__CLK_SD);
> +	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
> +}
> +
> +static inline void _sdhost_sd_clk_on(void __iomem *ioadr)
> +{
> +	u16 ctrl = 0;
> +
> +	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
> +	ctrl |= __CLK_SD;
> +	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
> +}
> +
> +static inline uint32_t _sdhost_calc_div(uint32_t base_clk, uint32_t clk)
> +{
> +	uint32_t N;
> +
> +	if (base_clk <= clk)
> +		return 0;
> +
> +	N = (uint32_t) (base_clk / clk);
> +	N = (N >> 1);
> +	if (N)
> +		N--;
> +	if ((base_clk / ((N + 1) << 1)) > clk)
> +		N++;
> +	if (__CLK_MAX_DIV < N)
> +		N = __CLK_MAX_DIV;
> +	return N;
> +}
> +
> +static inline void _sdhost_clk_set_and_on(void __iomem *ioadr, uint32_t div)
> +{
> +	u16 ctrl = 0;
> +
> +	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
> +	ctrl |= (uint16_t) (((div & 0x300) >> 2) | ((div & 0xFF) << 8));
> +	ctrl |= __CLK_IN_EN;
> +	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
> +	while (!(__CLK_IN_STABLE & readw_relaxed(ioadr +
> +						SDHOST_16_CLOCK_CTRL)))
> +		;
> +}
> +
> +#define SDHOST_8_TIMEOUT		0x2E
> +#define __TIMEOUT_MAX_VAL		0xe
> +static inline uint8_t _sdhost_calc_timeout(uint32_t base_clk,
> +						uint32_t div, uint32_t seconds)
> +{
> +	uint32_t sd_clk = seconds * (base_clk / ((div + 1) << 1));
> +	uint8_t i;
> +
> +	for (i = 0; i < 15; i++) {
> +		if ((((uint32_t) 1) << (16 + i)) > sd_clk) {
> +			if (0 != i)
> +				i--;
> +			break;
> +		}
> +	}
> +	return i;
> +}
> +
> +#define SDHOST_8_RESET			0x2F
> +#define  _RST_ALL		0x01
> +#define  _RST_CMD		0x02
> +#define  _RST_DATA		0x04
> +#define  _RST_EMMC		0x08	/*spredtrum define it byself */
> +
> +static inline void _sdhost_reset(void __iomem *ioadr, uint8_t mask)
> +{
> +	writeb_relaxed((_RST_EMMC | mask), ioadr + SDHOST_8_RESET);
> +	while (_sdhost_readb(ioadr, SDHOST_8_RESET) & mask)
> +		;
> +}
> +
> +/* spredtrum define it byself */
> +static inline void _sdhost_reset_emmc(void __iomem *ioadr)
> +{
> +	writeb_relaxed(0, ioadr + SDHOST_8_RESET);
> +	mdelay(2);
> +	writeb_relaxed(_RST_EMMC, ioadr + SDHOST_8_RESET);
> +}
> +
> +#define SDHOST_32_INT_STATUS		0x30
> +#define SDHOST_32_INT_STATUS_EN	0x34
> +#define SDHOST_32_INT_SIGNAL_EN	0x38
> +#define _INT_CMD_END		0x00000001
> +#define _INT_TRAN_END		0x00000002
> +#define _INT_DMA_END		0x00000008
> +#define _INT_WR_RDY			0x00000010	/*not used */
> +#define _INT_RD_RDY			0x00000020	/* not used */
> +#define _INT_ERR				0x00008000
> +#define _INT_ERR_CMD_TIMEOUT	0x00010000
> +#define _INT_ERR_CMD_CRC		0x00020000
> +#define _INT_ERR_CMD_END		0x00040000
> +#define _INT_ERR_CMD_INDEX	0x00080000
> +#define _INT_ERR_DATA_TIMEOUT	0x00100000
> +#define _INT_ERR_DATA_CRC		0x00200000
> +#define _INT_ERR_DATA_END		0x00400000
> +#define _INT_ERR_CUR_LIMIT		0x00800000
> +#define _INT_ERR_ACMD			0x01000000
> +#define _INT_ERR_ADMA			0x02000000
> +
> +/* used in irq */
> +#define _INT_FILTER_ERR_CMD \
> +		(_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
> +		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX)
> +#define _INT_FILTER_ERR_DATA \
> +		(_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
> +		_INT_ERR_DATA_END)
> +#define _INT_FILTER_ERR \
> +		(_INT_ERR | _INT_FILTER_ERR_CMD | \
> +		_INT_FILTER_ERR_DATA | _INT_ERR_ACMD | \
> +		_INT_ERR_ADMA)
> +#define _INT_FILTER_NORMAL \
> +		(_INT_CMD_END | _INT_TRAN_END)
> +
> +/* used for setting */
> +#define _DATA_FILTER_RD_SIGLE \
> +		(_INT_TRAN_END | _INT_DMA_END | \
> +		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
> +		_INT_ERR_DATA_CRC | _INT_ERR_DATA_END)
> +#define _DATA_FILTER_RD_MULTI \
> +		(_INT_TRAN_END | _INT_DMA_END | _INT_ERR | \
> +		_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
> +		_INT_ERR_DATA_END)
> +#define _DATA_FILTER_WR_SIGLE \
> +		(_INT_TRAN_END | _INT_DMA_END | \
> +		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
> +		_INT_ERR_DATA_CRC)
> +#define _DATA_FILTER_WR_MULT \
> +		(_INT_TRAN_END | _INT_DMA_END | \
> +		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
> +		_INT_ERR_DATA_CRC)
> +#define _CMD_FILTER_R0 \
> +		(_INT_CMD_END)
> +#define _CMD_FILTER_R2 \
> +		(_INT_CMD_END | _INT_ERR | \
> +		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
> +		_INT_ERR_CMD_END)
> +#define _CMD_FILTER_R3 \
> +		(_INT_CMD_END | _INT_ERR | \
> +		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_END)
> +#define _CMD_FILTER_R1_R4_R5_R6_R7 \
> +		(_INT_CMD_END | _INT_ERR | _INT_ERR_CMD_TIMEOUT | \
> +		_INT_ERR_CMD_CRC | _INT_ERR_CMD_END | \
> +		_INT_ERR_CMD_INDEX)
> +#define _CMD_FILTER_R1B \
> +		(_INT_CMD_END | _INT_ERR | \
> +		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
> +		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX | \
> +		_INT_TRAN_END | _INT_ERR_DATA_TIMEOUT)
> +
> +
> +static inline void _sdhost_disable_all_int(void __iomem *ioadr)
> +{
> +	writel_relaxed(0x0, ioadr + SDHOST_32_INT_SIGNAL_EN);
> +	writel_relaxed(0x0, ioadr + SDHOST_32_INT_STATUS_EN);
> +	writel_relaxed(0xFFFFFFFF, ioadr + SDHOST_32_INT_STATUS);
> +}
> +
> +static inline void _sdhost_enable_int(void __iomem *ioadr, u32 mask)
> +{
> +	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS_EN);
> +	writel_relaxed(mask, ioadr + SDHOST_32_INT_SIGNAL_EN);
> +}
> +
> +static inline void _sdhost_clear_int(void __iomem *ioadr, u32 mask)
> +{
> +	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS);
> +}
> +
> +#define SDHOST_16_ACMD_ERR		0x3C
> +
> +#define SDHOST_16_HOST_CTRL_2		0x3E
> +#define __TIMING_MODE_SDR12		0x0000
> +#define __TIMING_MODE_SDR25		0x0001
> +#define __TIMING_MODE_SDR50		0x0002
> +#define __TIMING_MODE_SDR104	0x0003
> +#define __TIMING_MODE_DDR50	0x0004
> +#define __TIMING_MODE_SDR200	0x0005
> +
> +static inline void _sdhost_set_uhs_mode(void __iomem *ioadr, uint16_t mode)
> +{
> +	writew_relaxed(mode, ioadr +  SDHOST_16_HOST_CTRL_2);
> +}
> +
> +#define SDHOST_MAX_CUR	1020
> +
> +/* following register is defined by spreadtrum self.
> + * It is not standard register of SDIO.
> + */
> +static inline void _sdhost_set_delay(
> +				void __iomem *ioadr, uint32_t write_delay,
> +				uint32_t read_pos_delay,
> +				uint32_t read_neg_delay)
> +{
> +	writel_relaxed(write_delay, ioadr + 0x80);
> +	writel_relaxed(read_pos_delay, ioadr + 0x84);
> +	writel_relaxed(read_neg_delay, ioadr + 0x88);
> +}
> +
> +#define SDHOST_32_CAPS	0x40
> +#define  __TIMEOUT_CLK_MASK	0x0000003F
> +#define  __TIMEOUT_CLK_SHIFT 0
> +#define  __TIMEOUT_CLK_UNIT	0x00000080
> +#define  __CLOCK_BASE_MASK	0x00003F00
> +#define  __CLOCK_V3_BASE_MASK	0x0000FF00
> +#define  __CLOCK_BASE_SHIFT	8
> +#define  __MAX_BLOCK_MASK	0x00030000
> +#define  __MAX_BLOCK_SHIFT  16
> +#define  __CAN_DO_8BIT	0x00040000
> +#define  __CAN_DO_ADMA2	0x00080000
> +#define  __CAN_DO_ADMA1	0x00100000
> +#define  __CAN_DO_HISPD	0x00200000
> +#define  __CAN_DO_SDMA	0x00400000
> +#define  __CAN_VDD_330	0x01000000
> +#define  __CAN_VDD_300	0x02000000
> +#define  __CAN_VDD_180	0x04000000
> +#define  __CAN_64BIT	0x10000000
> +
> +#define SDHOST_32_CAPS2	0x44
> +#define  __SUPPORT_SDR50	0x00000001
> +#define  __SUPPORT_SDR104	0x00000002
> +#define  __SUPPORT_DDR50	0x00000004
> +#define  __DRIVER_TYPE_A	0x00000010
> +#define  __DRIVER_TYPE_C	0x00000020
> +#define  __DRIVER_TYPE_D	0x00000040
> +#define  __RETUNING_TIMER_COUNT_MASK	0x00000F00
> +#define  __RETUNING_TIMER_COUNT_SHIFT	8
> +#define  __USE_SDR50_TUNING			0x00002000
> +#define  __RETUNING_MODE_MASK		0x0000C000
> +#define  __RETUNING_MODE_SHIFT		14
> +#define  __CLOCK_MUL_MASK	0x00FF0000
> +#define  __CLOCK_MUL_SHIFT	16
> +
> +
> +/**********************************************************\
> + *
> + * Controller block structure
> + *
> +\**********************************************************/
> +struct sdhost_host {
> +	/* --globe resource--- */
> +	spinlock_t lock;
> +	struct mmc_host *mmc;
> +
> +	/*--basic resource-- */
> +	void __iomem *ioaddr;
> +	int irq;
> +	const char *device_name;
> +	struct platform_device *pdev;
> +	unsigned long mapbase;
> +
> +	int detect_gpio;
> +	uint32_t ocr_avail;
> +	char *clk_name;
> +	char *clk_parent_name;
> +	uint32_t base_clk;
> +	uint32_t caps;
> +	uint32_t caps2;
> +	uint32_t pm_caps;
> +	uint32_t write_delay;
> +	uint32_t read_pos_delay;
> +	uint32_t read_neg_delay;
> +
> +	/* --extern resource getted by base resource-- */
> +	uint64_t dma_mask;
> +	uint8_t data_time_out_val;
> +	uint32_t signal_default_voltage;
> +	bool sdio_1_8v_signal_enabled;
> +	struct clk *clk;
> +	struct clk *clk_parent;
> +	struct tasklet_struct finish_tasklet;
> +	struct timer_list timer;
> +
> +	/* --runtime param-- */
> +	uint32_t int_filter;
> +	struct mmc_ios ios;
> +	struct mmc_request *mrq;	/* Current request */
> +	struct mmc_command *cmd;	/* Current command */
> +	uint16_t auto_cmd_mode;
> +
> +	/*--debugfs-- */
> +	struct dentry *debugfs_root;
> +};
> +
> +#endif /* __SDHOST_H_ */
> diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.c b/drivers/mmc/host/sprd_sdhost_debugfs.c
> new file mode 100644
> index 0000000..bc04aea
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost_debugfs.c
> @@ -0,0 +1,213 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost_debugfs.c - Secure Digital Host
> + * Controller Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +#include <linux/debugfs.h>
> +#include <linux/delay.h>
> +#include <linux/mmc/host.h>
> +
> +#include "sprd_sdhost_debugfs.h"
> +
> +#define ELEMENT(v) {v, #v}
> +#define ELEMENT_NUM	26
> +struct {
> +	uint32_t bit;
> +	char *caps_name;
> +} caps_info[3][ELEMENT_NUM] = {
> +	{
> +		ELEMENT(MMC_CAP_4_BIT_DATA),
> +		ELEMENT(MMC_CAP_MMC_HIGHSPEED),
> +		ELEMENT(MMC_CAP_SD_HIGHSPEED),
> +		ELEMENT(MMC_CAP_SDIO_IRQ),
> +		ELEMENT(MMC_CAP_SPI),
> +		ELEMENT(MMC_CAP_NEEDS_POLL),
> +		ELEMENT(MMC_CAP_8_BIT_DATA),
> +		ELEMENT(MMC_CAP_AGGRESSIVE_PM),
> +		ELEMENT(MMC_CAP_NONREMOVABLE),
> +		ELEMENT(MMC_CAP_WAIT_WHILE_BUSY),
> +		ELEMENT(MMC_CAP_ERASE),
> +		ELEMENT(MMC_CAP_1_8V_DDR),
> +		ELEMENT(MMC_CAP_1_2V_DDR),
> +		ELEMENT(MMC_CAP_POWER_OFF_CARD),
> +		ELEMENT(MMC_CAP_BUS_WIDTH_TEST),
> +		ELEMENT(MMC_CAP_UHS_SDR12),
> +		ELEMENT(MMC_CAP_UHS_SDR25),
> +		ELEMENT(MMC_CAP_UHS_SDR50),
> +		ELEMENT(MMC_CAP_UHS_SDR104),
> +		ELEMENT(MMC_CAP_UHS_DDR50),
> +		ELEMENT(MMC_CAP_RUNTIME_RESUME),
> +		ELEMENT(MMC_CAP_DRIVER_TYPE_A),
> +		ELEMENT(MMC_CAP_DRIVER_TYPE_C),
> +		ELEMENT(MMC_CAP_DRIVER_TYPE_D),
> +		ELEMENT(MMC_CAP_CMD23),
> +		ELEMENT(MMC_CAP_HW_RESET)
> +	}, {
> +		ELEMENT(MMC_CAP2_BOOTPART_NOACC),
> +		ELEMENT(MMC_CAP2_FULL_PWR_CYCLE),
> +		ELEMENT(MMC_CAP2_HS200_1_8V_SDR),
> +		ELEMENT(MMC_CAP2_HS200_1_2V_SDR),
> +		ELEMENT(MMC_CAP2_HS200),
> +		ELEMENT(MMC_CAP2_HC_ERASE_SZ),
> +		ELEMENT(MMC_CAP2_CD_ACTIVE_HIGH),
> +		ELEMENT(MMC_CAP2_RO_ACTIVE_HIGH),
> +		ELEMENT(MMC_CAP2_PACKED_RD),
> +		ELEMENT(MMC_CAP2_PACKED_WR),
> +		ELEMENT(MMC_CAP2_PACKED_CMD),
> +		ELEMENT(MMC_CAP2_NO_PRESCAN_POWERUP),
> +		ELEMENT(MMC_CAP2_HS400_1_8V),
> +		ELEMENT(MMC_CAP2_HS400_1_2V),
> +		ELEMENT(MMC_CAP2_HS400),
> +		ELEMENT(MMC_CAP2_SDIO_IRQ_NOTHREAD)
> +	}, {
> +		ELEMENT(MMC_PM_KEEP_POWER),
> +		ELEMENT(MMC_PM_WAKE_SDIO_IRQ),
> +		ELEMENT(MMC_PM_IGNORE_PM_NOTIFY)
> +	}
> +
> +};
> +
> +static int sdhost_param_show(struct seq_file *s, void *data)
> +{
> +	struct sdhost_host *host = s->private;
> +	uint32_t i;
> +
> +	seq_printf(s, "\n"
> +		   "ioaddr\t= 0x%p\n"
> +		   "irq\t= %d\n"
> +		   "device_name\t= %s\n"
> +		   "detect_gpio\t= %d\n"
> +		   "base_clk\t= %d\n"
> +		   "write_delay\t= %d\n"
> +		   "read_pos_delay\t= %d\n"
> +		   "read_neg_delay\t= %d\n",
> +		   host->ioaddr, host->irq, host->device_name,
> +		   host->detect_gpio, host->base_clk,
> +		   host->write_delay, host->read_pos_delay,
> +		   host->read_neg_delay);
> +	seq_printf(s, "OCR 0x%x\n", host->ocr_avail);
> +
> +	for (i = 0; i < ELEMENT_NUM; i++) {
> +		if ((caps_info[0][i].bit ==
> +			(host->caps & caps_info[0][i].bit))
> +					&& caps_info[0][i].bit)
> +			seq_printf(s, "caps:%s\n", caps_info[0][i].caps_name);
> +	}
> +	for (i = 0; i < ELEMENT_NUM; i++) {
> +		if ((caps_info[1][i].bit ==
> +			(host->caps2 & caps_info[1][i].bit))
> +						&& caps_info[1][i].bit)
> +			seq_printf(s, "caps2:%s\n", caps_info[1][i].caps_name);
> +	}
> +	for (i = 0; i < ELEMENT_NUM; i++) {
> +		if ((caps_info[2][i].bit ==
> +				(host->pm_caps & caps_info[2][i].bit))
> +							&& caps_info[2][i].bit)
> +			seq_printf(s, "pm_caps:%s\n",
> +					caps_info[2][i].caps_name);
> +	}
> +
> +	return 0;
> +}
> +
> +static int sdhost_param_open(struct inode *inode, struct file *file)
> +{
> +	return single_open(file, sdhost_param_show, inode->i_private);
> +}
> +
> +static const struct file_operations sdhost_param_fops = {
> +	.open = sdhost_param_open,
> +	.read = seq_read,
> +	.llseek = seq_lseek,
> +	.release = single_release,
> +};
> +
> +#define SDHOST_ATTR(PARAM_NAME)	\
> +	static int sdhost_##PARAM_NAME##_get(void *data, u64 *val)\
> +	{ \
> +		struct sdhost_host *host = data;\
> +		*val = (u64)host->PARAM_NAME;\
> +		return 0;\
> +	} \
> +	static int sdhost_##PARAM_NAME##_set(void *data, u64 val)\
> +	{ \
> +		struct sdhost_host *host = data;\
> +		if (0x7F >= (uint32_t)val) { \
> +			host->PARAM_NAME = (uint32_t)val;\
> +			_sdhost_set_delay(host->ioaddr, \
> +							host->write_delay, \
> +							host->read_pos_delay, \
> +							host->read_neg_delay);\
> +		} \
> +		return 0;\
> +	} \
> +	DEFINE_SIMPLE_ATTRIBUTE(sdhost_##PARAM_NAME##_fops,\
> +						sdhost_##PARAM_NAME##_get,\
> +						sdhost_##PARAM_NAME##_set,\
> +						"%llu\n")
> +
> +SDHOST_ATTR(write_delay);
> +SDHOST_ATTR(read_pos_delay);
> +SDHOST_ATTR(read_neg_delay);
> +
> +void sdhost_add_debugfs(struct sdhost_host *host)
> +{
> +	struct dentry *root;
> +
> +	root = debugfs_create_dir(host->device_name, NULL);
> +	if (IS_ERR(root))
> +		/* Don't complain -- debugfs just isn't enabled */
> +		return;
> +	if (!root)
> +		return;
> +
> +	host->debugfs_root = root;
> +
> +	if (!debugfs_create_file("basic_resource", S_IRUSR, root,
> +				(void *)host, &sdhost_param_fops))
> +		goto err;
> +	if (!debugfs_create_file("write_delay", S_IRUSR | S_IWUSR, root,
> +				(void *)host, &sdhost_write_delay_fops))
> +		goto err;
> +	if (!debugfs_create_file("read_pos_delay", S_IRUSR | S_IWUSR, root,
> +				(void *)host, &sdhost_read_pos_delay_fops))
> +		goto err;
> +	if (!debugfs_create_file("read_neg_delay", S_IRUSR | S_IWUSR, root,
> +				(void *)host, &sdhost_read_neg_delay_fops))
> +		goto err;
> +	return;
> +
> +err:
> +	debugfs_remove_recursive(root);
> +	host->debugfs_root = 0;
> +}
> +
> +void dump_sdio_reg(struct sdhost_host *host)
> +{
> +	unsigned int i;
> +
> +	if (!host->mmc->card)
> +		return;
> +
> +	pr_info("sdhost" ": =========== REGISTER DUMP (%s)========\n",
> +		host->device_name);
> +
> +	for (i = 0; i < 0x09; i++) {
> +		pr_info("sdhost" ": 0x%08x | 0x%08x | 0x%08x | 0x%08x\n\r",
> +		       _sdhost_readl(host->ioaddr, 0 + (i << 4)),
> +		       _sdhost_readl(host->ioaddr, 4 + (i << 4)),
> +		       _sdhost_readl(host->ioaddr, 8 + (i << 4)),
> +		       _sdhost_readl(host->ioaddr, 12 + (i << 4))
> +		    );
> +	}
> +
> +	pr_info("sdhost" ": ==================================\n");
> +	mdelay(100);
> +}
> diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.h b/drivers/mmc/host/sprd_sdhost_debugfs.h
> new file mode 100644
> index 0000000..0063e1b
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost_debugfs.h
> @@ -0,0 +1,27 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost_debugfs.h - Secure Digital Host Controller
> + * Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +
> +#ifndef _SDHOST_DEBUGFS_H_
> +#define _SDHOST_DEBUGFS_H_
> +
> +#include "sprd_sdhost.h"
> +
> +#ifdef CONFIG_DEBUG_FS
> +void sdhost_add_debugfs(struct sdhost_host *host);
> +void dump_sdio_reg(struct sdhost_host *host);
> +#else
> +static inline void sdhost_add_debugfs(struct sdhost_host *host) {}
> +static inline void dump_sdio_reg(struct sdhost_host *host) {}
> +#endif
> +
> +#endif
> 

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Chunyan Zhang]

On Wed, Jul 1, 2015 at 5:57 PM, Jaehoon Chung <jh80.chung@samsung.com> wrote:
> Hi,
>
> Is sdhost based on SDHCI controller?
> Why don't use sdhci.c? Is there any reason?
>
> Best Regards,
> Jaehoon Chung
>

Because of base64 code problem of his email server, I'm reporting his
reply instead.

>From Billows Wu <billows.wu@spreadtrum.com>
----------------------------------------------------------------------------------------------------------------------------------------
Hi Jaehoon,
Sdhost driver is not based on SDHCI controller.
Our MMC controller is not a standard controller which meets host
controller specification completely.
We add some registers and change some bits in the remaining register,
such as about clock and regulator portion.
If our driver base on SDHCI controller, we must change many codes in
sdhci.c, and our MMC driver will become more complicated.
In order to better use our controller capability and make MMC driver
more compact, we do not use SDHCI controller.

Thanks.
--------------------------------------------------------------------------------------------------------------------------------------------------

[RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Chunyan Zhang]

From: Billows Wu <billows.wu@spreadtrum.com>

The Spreadtrum MMC host driver is used to support EMMC, SD, and
SDIO types of memory cards.

Signed-off-by: Billows Wu <billows.wu@spreadtrum.com>
Reviewed-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
 drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
 drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
 drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
 6 files changed, 2027 insertions(+)
 create mode 100644 drivers/mmc/host/sprd_sdhost.c
 create mode 100644 drivers/mmc/host/sprd_sdhost.h
 create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
 create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h

diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
new file mode 100644
index 0000000..e7a66e8
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost.c
@@ -0,0 +1,1270 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+
+#include "sprd_sdhost.h"
+#include "sprd_sdhost_debugfs.h"
+
+#define DRIVER_NAME "sdhost"
+#define SDHOST_CAPS \
+		(MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
+		MMC_CAP_ERASE |	 MMC_CAP_UHS_SDR50 | \
+		MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
+
+struct sdhost_caps_data {
+	char *name;
+	uint32_t ocr_avail;
+	uint32_t caps;
+	uint32_t caps2;
+	uint32_t pm_caps;
+	/* TODO: we will obtain these values from regulator and clock
+	 * phandles after LDO and clock function is OK
+	 */
+	uint32_t base_clk;
+	uint32_t signal_default_voltage;
+};
+
+struct sdhost_caps_data sd_caps_info = {
+	.name = "sd",
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
+	.caps = SDHOST_CAPS,
+	.caps2 = MMC_CAP2_HC_ERASE_SZ,
+	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
+	.base_clk = 192000000,
+	.signal_default_voltage = 3000000,
+};
+
+struct sdhost_caps_data wifi_caps_info = {
+	.name = "wifi",
+	.ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
+	    MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,
+	.pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
+	.base_clk = 76000000,
+};
+
+struct sdhost_caps_data emmc_caps_info = {
+	.name = "emmc",
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
+	.caps = SDHOST_CAPS |
+	    MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
+	    MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
+	.caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
+	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
+	.base_clk = 192000000,
+	.signal_default_voltage = 1800000,
+};
+
+const struct of_device_id sdhost_of_match[] = {
+	{.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
+	{.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
+	{.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
+	{ /* sentinel */ }
+};
+
+void _reset_ios(struct sdhost_host *host)
+{
+	_sdhost_disable_all_int(host->ioaddr);
+
+	host->ios.clock = 0;
+	host->ios.vdd = 0;
+	/* host->ios.bus_mode    = MMC_BUSMODE_OPENDRAIN; */
+	/* host->ios.chip_select = MMC_CS_DONTCARE; */
+	host->ios.power_mode = MMC_POWER_OFF;
+	host->ios.bus_width = MMC_BUS_WIDTH_1;
+	host->ios.timing = MMC_TIMING_LEGACY;
+	host->ios.signal_voltage = MMC_SIGNAL_VOLTAGE_330;
+	/*host->ios.drv_type    = MMC_SET_DRIVER_TYPE_B; */
+
+	_sdhost_reset(host->ioaddr, _RST_ALL);
+	_sdhost_set_delay(host->ioaddr, host->write_delay,
+			  host->read_pos_delay, host->read_neg_delay);
+}
+
+int __local_pm_suspend(struct sdhost_host *host)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	_sdhost_disable_all_int(host->ioaddr);
+	_sdhost_all_clk_off(host->ioaddr);
+	clk_disable(host->clk);
+	/* wake lock */
+	spin_unlock_irqrestore(&host->lock, flags);
+	clk_unprepare(host->clk);
+	synchronize_irq(host->irq);
+
+	return 0;
+}
+
+int __local_pm_resume(struct sdhost_host *host)
+{
+	unsigned long flags;
+
+	clk_prepare(host->clk);
+	spin_lock_irqsave(&host->lock, flags);
+	clk_enable(host->clk);
+	if (host->ios.clock) {
+		_sdhost_sd_clk_off(host->ioaddr);
+		_sdhost_clk_set_and_on(host->ioaddr,
+				       _sdhost_calc_div(host->base_clk,
+							host->ios.clock));
+		_sdhost_sd_clk_on(host->ioaddr);
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return 0;
+}
+
+void pm_runtime_setting(struct platform_device *pdev, struct sdhost_host *host)
+{
+	pm_runtime_set_active(&pdev->dev);
+#ifdef CONFIG_PM_RUNTIME
+	pm_suspend_ignore_children(&pdev->dev, true);
+#endif
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+}
+
+int _runtime_get(struct sdhost_host *host)
+{
+	return pm_runtime_get_sync(host->mmc->parent);
+}
+
+int _runtime_put(struct sdhost_host *host)
+{
+	pm_runtime_mark_last_busy(host->mmc->parent);
+	return pm_runtime_put_autosuspend(host->mmc->parent);
+}
+
+int _runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	return __local_pm_suspend(host);
+}
+
+int _runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	return __local_pm_resume(host);
+}
+
+int _runtime_idle(struct device *dev)
+{
+	return 0;
+}
+
+int _pm_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	_runtime_get(host);
+
+	host->mmc->pm_flags = host->mmc->pm_caps;
+
+	pr_debug("%s(%s):\n"
+		 "sdhost clock = %d\n"
+		 "sdhost vdd = %d\n"
+		 "sdhost bus_mode = %d\n"
+		 "sdhost chip_select = %d\n"
+		 "sdhost power_mode = %d\n"
+		 "sdhost bus_width = %d\n"
+		 "sdhost timing = %d\n"
+		 "sdhost signal_voltage = %d\n"
+		 "sdhost drv_type = %d\n",
+		 __func__, host->device_name,
+		 host->ios.clock,
+		 host->ios.vdd,
+		 host->ios.bus_mode,
+		 host->ios.chip_select,
+		 host->ios.power_mode,
+		 host->ios.bus_width,
+		 host->ios.timing,
+		 host->ios.signal_voltage, host->ios.drv_type);
+
+	return __local_pm_suspend(host);
+}
+
+int _pm_resume(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+	struct mmc_ios ios;
+
+	__local_pm_resume(host);
+
+	ios = host->mmc->ios;
+	_reset_ios(host);
+	host->mmc->ops->set_ios(host->mmc, &ios);
+
+	pr_debug("%s(%s):\n"
+		 "sdhost clock = %d\n"
+		 "sdhost vdd = %d\n"
+		 "sdhost bus_mode = %d\n"
+		 "sdhost chip_select = %d\n"
+		 "sdhost power_mode = %d\n"
+		 "sdhost bus_width = %d\n"
+		 "sdhost timing = %d\n"
+		 "sdhost signal_voltage = %d\n"
+		 "sdhost drv_type = %d\n",
+		 __func__, host->device_name,
+		 host->ios.clock,
+		 host->ios.vdd,
+		 host->ios.bus_mode,
+		 host->ios.chip_select,
+		 host->ios.power_mode,
+		 host->ios.bus_width,
+		 host->ios.timing,
+		 host->ios.signal_voltage, host->ios.drv_type);
+
+	_runtime_put(host);
+
+	return 0;
+}
+
+void __get_rsp(struct sdhost_host *host)
+{
+	u32 i, offset;
+	unsigned int flags = host->cmd->flags;
+	u32 *resp = host->cmd->resp;
+	void __iomem *addr = host->ioaddr;
+
+	if (!(flags & MMC_RSP_PRESENT))
+		return;
+
+	if (flags & MMC_RSP_136) {
+		/* CRC is stripped so we need to do some shifting. */
+		for (i = 0, offset = 12; i < 3; i++, offset -= 4) {
+			resp[i] =
+			    _sdhost_readl(addr, SDHOST_32_RESP + offset) << 8;
+			resp[i] |=
+			    _sdhost_readb(addr, SDHOST_32_RESP + offset - 1);
+		}
+		resp[3] = _sdhost_readl(addr, SDHOST_32_RESP) << 8;
+	} else {
+		resp[0] = _sdhost_readl(addr, SDHOST_32_RESP);
+	}
+}
+
+void _send_cmd(struct sdhost_host *host, struct mmc_command *cmd)
+{
+	struct mmc_data *data = cmd->data;
+	int sg_cnt;
+	u32 flag = 0;
+	u16 rsp_type = 0;
+	int if_has_data = 0;
+	int if_multi = 0;
+	int if_rd = 0;
+	int if_dma = 0;
+	uint16_t auto_cmd = __ACMD_DIS;
+
+	pr_debug("sdhost %s cmd %d, arg 0x%x, flag 0x%x\n",
+		 host->device_name, cmd->opcode, cmd->arg, cmd->flags);
+	if (cmd->data)
+		pr_debug("sdhost %s block size %d, cnt %d\n",
+			 host->device_name, cmd->data->blksz,
+			 cmd->data->blocks);
+
+	_sdhost_disable_all_int(host->ioaddr);
+
+	if (38 == cmd->opcode) {
+		/* if it is erase command , it's busy time will long,
+		 * so we set long timeout value here.
+		 */
+		mod_timer(&host->timer, jiffies + 10 * HZ);
+		_sdhost_writeb(host->ioaddr, __TIMEOUT_MAX_VAL,
+			       SDHOST_8_TIMEOUT);
+	} else {
+		mod_timer(&host->timer, jiffies + 3 * HZ);
+		_sdhost_writeb(host->ioaddr, host->data_time_out_val,
+			       SDHOST_8_TIMEOUT);
+	}
+
+	host->cmd = cmd;
+	if (data) {
+		/* set data param */
+		WARN_ON((data->blksz * data->blocks > 524288) ||
+		       (data->blksz > host->mmc->max_blk_size) ||
+		       (data->blocks > 65535));
+
+		data->bytes_xfered = 0;
+
+		if_has_data = 1;
+		if_rd = (data->flags & MMC_DATA_READ);
+		if_multi = (mmc_op_multi(cmd->opcode) || data->blocks > 1);
+		if (if_rd && !if_multi)
+			flag = _DATA_FILTER_RD_SIGLE;
+		else if (if_rd && if_multi)
+			flag = _DATA_FILTER_RD_MULTI;
+		else if (!if_rd && !if_multi)
+			flag = _DATA_FILTER_WR_SIGLE;
+		else
+			flag = _DATA_FILTER_WR_MULT;
+
+		if (!host->auto_cmd_mode)
+			flag |= _INT_ERR_ACMD;
+
+		if_dma = 1;
+		auto_cmd = host->auto_cmd_mode;
+		_sdhost_set_blk_size(host->ioaddr, data->blksz);
+
+		sg_cnt = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+				    (data->flags & MMC_DATA_READ) ?
+				    DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		if (1 == sg_cnt) {
+			_sdhost_set_dma(host->ioaddr, __SDMA_MOD);
+			_sdhost_set_16_blk_cnt(host->ioaddr, data->blocks);
+			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
+				       SDHOST_32_SYS_ADDR);
+		} else {
+			WARN_ON(1);
+			flag |= _INT_ERR_ADMA;
+			_sdhost_set_dma(host->ioaddr, __32_ADMA_MOD);
+			_sdhost_set_32_blk_cnt(host->ioaddr, data->blocks);
+			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
+				       SDHOST_32_SYS_ADDR);
+		}
+	} else {
+		/* _sdhost_set_trans_mode(host->ioaddr,
+		 * 0, 0, __ACMD_DIS, 0, 0);
+		 */
+	}
+
+	_sdhost_writel(host->ioaddr, cmd->arg, SDHOST_32_ARG);
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1B:
+		rsp_type = _RSP1B_5B;
+		flag |= _CMD_FILTER_R1B;
+		break;
+	case MMC_RSP_NONE:
+		rsp_type = _RSP0;
+		flag |= _CMD_FILTER_R0;
+		break;
+	case MMC_RSP_R2:
+		rsp_type = _RSP2;
+		flag |= _CMD_FILTER_R2;
+		break;
+
+	case MMC_RSP_R4:
+		rsp_type = _RSP3_4;
+		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
+		break;
+
+	case MMC_RSP_R1:
+	case MMC_RSP_R1 & ~MMC_RSP_CRC:
+		rsp_type = _RSP1_5_6_7;
+		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
+		break;
+
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	host->int_filter = flag;
+	_sdhost_enable_int(host->ioaddr, flag);
+	pr_debug("sdhost %s cmd:%d rsp:%d intflag:0x%x\n"
+		 "if_multi:0x%x if_rd:0x%x auto_cmd:0x%x if_dma:0x%x\n",
+		 host->device_name, cmd->opcode, mmc_resp_type(cmd),
+		 flag, if_multi, if_rd, auto_cmd, if_dma);
+	_sdhost_set_trans_and_cmd(host->ioaddr, if_multi, if_rd, auto_cmd,
+		if_multi, if_dma, cmd->opcode, if_has_data, rsp_type);
+}
+
+void _cmd_irq(struct sdhost_host *host, u32 intmask)
+{
+	if (0 == intmask) {
+		WARN_ON(1);
+		return;
+	}
+
+	if (!host->cmd) {
+		pr_err("%s: got command interrupt 0x%08x even though no command operation was in process\n",
+		     host->device_name, (unsigned)intmask);
+		return;
+	}
+
+	if (_INT_ERR_CMD_TIMEOUT & intmask)
+		host->cmd->error = -ETIMEDOUT;
+	else if ((_INT_ERR_CMD_CRC | _INT_ERR_CMD_END |
+		  _INT_ERR_CMD_INDEX) & intmask)
+		host->cmd->error = -EILSEQ;
+}
+
+void _data_irq(struct sdhost_host *host, u32 intmask)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	if (data) {
+		/* current error is happened in data token */
+		if (_INT_ERR_DATA_TIMEOUT & intmask)
+			data->error = -ETIMEDOUT;
+		else
+			data->error = -EILSEQ;
+	} else {
+		/* current error is happend in response with busy */
+		if (_INT_ERR_DATA_TIMEOUT & intmask)
+			cmd->error = -ETIMEDOUT;
+		else
+			cmd->error = -EILSEQ;
+	}
+}
+
+void _trans_end_irq(struct sdhost_host *host, u32 intmask)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	if (data) {
+		dma_unmap_sg(mmc_dev(host->mmc),
+			     data->sg, data->sg_len,
+			     (data->flags & MMC_DATA_READ) ?
+			     DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		data->error = 0;
+		data->bytes_xfered = data->blksz * data->blocks;
+	} else {
+		/* R1B also can produce transferComplete interrupt */
+		cmd->error = 0;
+	}
+}
+
+int _err_irq_handle(struct sdhost_host *host, u32 intmask)
+{
+	int ret = 1;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	/* some error happened in command */
+	_cmd_irq(host, intmask & _INT_FILTER_ERR);
+	if (_INT_FILTER_ERR_DATA & intmask)
+		/* some error happened in data token or command with R1B */
+		_data_irq(host, intmask);
+
+	if (_INT_ERR_ACMD & intmask)
+		/* Auto cmd12 and cmd23 error is belong to data token error */
+		data->error = -EILSEQ;
+
+	if (_INT_ERR_ADMA & intmask)
+		data->error = -EIO;
+
+	/* for debug */
+	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
+	dump_sdio_reg(host);
+	_sdhost_disable_all_int(host->ioaddr);
+
+	/* if current error happened in data token we send cmd12 to stop it*/
+	if ((mrq->cmd == cmd) && (mrq->stop)) {
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		_send_cmd(host, mrq->stop);
+	} else {
+		/* request finish with error, so reset it
+		 * and stop the request
+		 */
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		tasklet_schedule(&host->finish_tasklet);
+	}
+
+	return ret;
+}
+
+int _normal_irq_handle(struct sdhost_host *host, u32 intmask)
+{
+	int ret = 0;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+
+	/* delete irq that wanted in filter */
+	/* _sdhost_clear_int(host->ioaddr,
+	 *_INT_FILTER_NORMAL & intmask);
+	 */
+	host->int_filter &= ~(_INT_FILTER_NORMAL & intmask);
+	if (_INT_DMA_END & intmask)
+		_sdhost_writel(host->ioaddr,
+			_sdhost_readl(host->ioaddr,
+				SDHOST_32_SYS_ADDR),
+				SDHOST_32_SYS_ADDR);
+
+	if (_INT_CMD_END & intmask) {
+		cmd->error = 0;
+		__get_rsp(host);
+	}
+	if (_INT_TRAN_END & intmask)
+		_trans_end_irq(host, intmask);
+	if (!(_INT_FILTER_NORMAL & host->int_filter)) {
+		/* current cmd finished */
+		_sdhost_disable_all_int(host->ioaddr);
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		if (mrq->sbc == cmd) {
+			_send_cmd(host, mrq->cmd);
+		} else if ((mrq->cmd == host->cmd)
+			&& (mrq->stop)) {
+				_send_cmd(host, mrq->stop);
+		} else {
+			/* finish with success and stop the
+			 * request
+			 */
+			tasklet_schedule(&host->finish_tasklet);
+			ret = 1;
+		}
+	}
+
+	return ret;
+}
+
+irqreturn_t _irq_func(int irq, void *param)
+{
+	u32 intmask;
+	struct sdhost_host *host = (struct sdhost_host *)param;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data;
+
+	spin_lock(&host->lock);
+	/* maybe _timeout_func run in one core and _irq_func run in
+	 * another core, this will panic if access cmd->data
+	 */
+	if ((!mrq) || (!cmd)) {
+		spin_unlock(&host->lock);
+		return IRQ_NONE;
+	}
+	data = cmd->data;
+
+	intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
+	if (!intmask) {
+		spin_unlock(&host->lock);
+		return IRQ_NONE;
+	}
+	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
+
+	/* disable unused interrupt */
+	_sdhost_clear_int(host->ioaddr, intmask);
+	/* just care about the interrupt that we want */
+	intmask &= host->int_filter;
+
+	while (intmask) {
+		int ret;
+
+		if (_INT_FILTER_ERR & intmask) {
+			ret = _err_irq_handle(host, intmask);
+			if (ret)
+				goto out;
+		} else {
+			ret = _normal_irq_handle(host, intmask);
+			if (ret)
+				goto out;
+		}
+
+		intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
+		_sdhost_clear_int(host->ioaddr, intmask);
+		intmask &= host->int_filter;
+	};
+
+out:
+	spin_unlock(&host->lock);
+	return IRQ_HANDLED;
+}
+
+void _tasklet_func(unsigned long param)
+{
+	struct sdhost_host *host = (struct sdhost_host *)param;
+	unsigned long flags;
+	struct mmc_request *mrq;
+
+	del_timer(&host->timer);
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (!host->mrq) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+	mrq = host->mrq;
+	host->mrq = NULL;
+	host->cmd = NULL;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	pr_debug("sdhost %s cmd %d data %d\n",
+		 host->device_name, mrq->cmd->error,
+		 ((!!mrq->cmd->data) ? mrq->cmd->data->error : 0));
+	mmc_request_done(host->mmc, mrq);
+	_runtime_put(host);
+}
+
+void _timeout_func(unsigned long data)
+{
+	struct sdhost_host *host = (struct sdhost_host *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (host->mrq) {
+		pr_info("sdhost %s Timeout waiting for hardware interrupt!\n",
+			host->device_name);
+		dump_sdio_reg(host);
+		if (host->cmd->data)
+			host->cmd->data->error = -ETIMEDOUT;
+		else if (host->cmd)
+			host->cmd->error = -ETIMEDOUT;
+		else
+			host->mrq->cmd->error = -ETIMEDOUT;
+
+		_sdhost_disable_all_int(host->ioaddr);
+		_sdhost_reset(host->ioaddr, _RST_CMD | _RST_DATA);
+		tasklet_schedule(&host->finish_tasklet);
+	}
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	host->mrq = mrq;
+	/* 1 find whether card is still in slot */
+	if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE)) {
+		if (!mmc_gpio_get_cd(host->mmc)) {
+			mrq->cmd->error = -ENOMEDIUM;
+			tasklet_schedule(&host->finish_tasklet);
+			mmiowb();
+			spin_unlock_irqrestore(&host->lock, flags);
+			return;
+		}
+		/* else asume sdcard is present */
+	}
+
+	/*
+	 * in our control we can not use auto cmd12 and auto cmd23 together
+	 * so in following program we use auto cmd23 prior to auto cmd12
+	 */
+	pr_debug("sdhost %s request %d %d %d\n",
+		 host->device_name, !!mrq->sbc, !!mrq->cmd, !!mrq->stop);
+	host->auto_cmd_mode = __ACMD_DIS;
+	if (!mrq->sbc && mrq->stop && SDHOST_FLAG_EN_ACMD12) {
+		host->auto_cmd_mode = __ACMD12;
+		mrq->data->stop = NULL;
+		mrq->stop = NULL;
+	}
+
+	/* 3 send cmd list */
+	if ((mrq->sbc) && SDHOST_FLAG_EN_ACMD23) {
+		host->auto_cmd_mode = __ACMD23;
+		_send_cmd(host, mrq->cmd);
+	} else if (mrq->sbc)
+		_send_cmd(host, mrq->sbc);
+	else
+		_send_cmd(host, mrq->cmd);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void signal_voltage_on_off(struct sdhost_host *host, uint32_t on_off)
+{
+	if (!host->mmc->supply.vqmmc) {
+		pr_err("%s(%s) there is no signal voltage!\n",
+		       __func__, host->device_name);
+		return;
+	}
+
+	if (on_off && (!host->sdio_1_8v_signal_enabled)) {
+		if (!regulator_enable(host->mmc->supply.vqmmc) &&
+			regulator_is_enabled(host->mmc->supply.vqmmc)) {
+			host->sdio_1_8v_signal_enabled = true;
+			pr_info("%s(%s) signal voltage enable success!\n",
+					__func__, host->device_name);
+		} else
+			pr_err("%s(%s) signal voltage enable fail!\n",
+				__func__, host->device_name);
+
+	} else if (!on_off && host->sdio_1_8v_signal_enabled) {
+		if (!regulator_disable(host->mmc->supply.vqmmc) &&
+			!regulator_is_enabled(host->mmc->supply.vqmmc)) {
+			host->sdio_1_8v_signal_enabled = false;
+			pr_info("%s(%s) signal voltage disable success!\n",
+				__func__, host->device_name);
+		} else
+			pr_err("%s(%s) signal voltage disable fail\n",
+				__func__, host->device_name);
+	}
+}
+
+/*
+ * 1 This votage is always poweron
+ * 2 initial votage is 2.7v~3.6v
+ * 3 It can be reconfig to 1.7v~1.95v
+ */
+int sdhost_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int err;
+
+	pr_debug("%s(%s) vqmmc:\n"
+		 "sdhost clock = %d-->%d\n"
+		 "sdhost vdd = %d-->%d\n"
+		 "sdhost bus_mode = %d-->%d\n"
+		 "sdhost chip_select = %d-->%d\n"
+		 "sdhost power_mode = %d-->%d\n"
+		 "sdhost bus_width = %d-->%d\n"
+		 "sdhost timing = %d-->%d\n"
+		 "sdhost signal_voltage = %d-->%d\n"
+		 "sdhost drv_type = %d-->%d\n",
+		 __func__, host->device_name,
+		 host->ios.clock, ios->clock,
+		 host->ios.vdd, ios->vdd,
+		 host->ios.bus_mode, ios->bus_mode,
+		 host->ios.chip_select, ios->chip_select,
+		 host->ios.power_mode, ios->power_mode,
+		 host->ios.bus_width, ios->bus_width,
+		 host->ios.timing, ios->timing,
+		 host->ios.signal_voltage, ios->signal_voltage,
+		 host->ios.drv_type, ios->drv_type);
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (!mmc->supply.vqmmc) {
+		/* there are no 1.8v signal votage. */
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		/* err = -EINVAL; */
+		err = 0;
+		pr_err("sdhost %s There is no signalling voltage\n",
+		       host->device_name);
+		return err;
+	}
+
+	/* I/O power supply */
+	if (ios->signal_voltage == host->ios.signal_voltage) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		return 0;
+	}
+
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    3000000, 3000000);
+		break;
+	case MMC_SIGNAL_VOLTAGE_180:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    1800000, 1800000);
+		break;
+	case MMC_SIGNAL_VOLTAGE_120:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    1100000, 1300000);
+		break;
+	default:
+		err = -EIO;
+		break;
+	}
+	if (likely(!err))
+		host->ios.signal_voltage = ios->signal_voltage;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+	WARN(err, "Switching to signalling voltage  failed\n");
+	return err;
+}
+
+void sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	pr_debug("%s(%s) ios:\n"
+		 "sdhost clock = %d-->%d\n"
+		 "sdhost vdd = %d-->%d\n"
+		 "sdhost bus_mode = %d-->%d\n"
+		 "sdhost chip_select = %d-->%d\n"
+		 "sdhost power_mode = %d-->%d\n"
+		 "sdhost bus_width = %d-->%d\n"
+		 "sdhost timing = %d-->%d\n"
+		 "sdhost signal_voltage = %d-->%d\n"
+		 "sdhost drv_type = %d-->%d\n",
+		 __func__, host->device_name,
+		 host->ios.clock, ios->clock,
+		 host->ios.vdd, ios->vdd,
+		 host->ios.bus_mode, ios->bus_mode,
+		 host->ios.chip_select, ios->chip_select,
+		 host->ios.power_mode, ios->power_mode,
+		 host->ios.bus_width, ios->bus_width,
+		 host->ios.timing, ios->timing,
+		 host->ios.signal_voltage, ios->signal_voltage,
+		 host->ios.drv_type, ios->drv_type);
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+	dump_sdio_reg(host);
+
+	if (0 == ios->clock) {
+		_sdhost_all_clk_off(host->ioaddr);
+		host->ios.clock = 0;
+	} else if (ios->clock != host->ios.clock) {
+		uint32_t div;
+
+		div = _sdhost_calc_div(host->base_clk, ios->clock);
+		_sdhost_sd_clk_off(host->ioaddr);
+		_sdhost_clk_set_and_on(host->ioaddr, div);
+		_sdhost_sd_clk_on(host->ioaddr);
+		host->ios.clock = ios->clock;
+		host->data_time_out_val =
+			_sdhost_calc_timeout(host->base_clk, div, 3);
+	}
+
+	if (ios->power_mode != host->ios.power_mode) {
+		switch (ios->power_mode) {
+		case MMC_POWER_OFF:
+			signal_voltage_on_off(host, 0);
+			if (mmc->supply.vmmc)
+				mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, 0);
+			_reset_ios(host);
+			host->ios.power_mode = ios->power_mode;
+			break;
+		case MMC_POWER_ON:
+		case MMC_POWER_UP:
+			if (mmc->supply.vmmc)
+				mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, ios->vdd);
+			signal_voltage_on_off(host, 1);
+			host->ios.power_mode = ios->power_mode;
+			host->ios.vdd = ios->vdd;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* flash power voltage select */
+	if (ios->vdd != host->ios.vdd) {
+		if (mmc->supply.vmmc) {
+			pr_info("sdhost %s 3.0 %d!\n",
+				host->device_name, ios->vdd);
+			mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, ios->vdd);
+		}
+		host->ios.vdd = ios->vdd;
+	}
+
+	if (ios->bus_width != host->ios.bus_width) {
+		_sdhost_set_buswidth(host->ioaddr, ios->bus_width);
+		host->ios.bus_width = ios->bus_width;
+	}
+
+	if (ios->timing != host->ios.timing) {
+		/* 1 first close SD clock */
+		_sdhost_sd_clk_off(host->ioaddr);
+		/* 2 set timing mode */
+		switch (ios->timing) {	/* timing specification used */
+		case MMC_TIMING_LEGACY:
+			/*basic clock mode */
+			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
+			break;
+		case MMC_TIMING_MMC_HS:
+		case MMC_TIMING_SD_HS:
+			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
+			break;
+		case MMC_TIMING_UHS_SDR12:
+		case MMC_TIMING_UHS_SDR25:
+		case MMC_TIMING_UHS_SDR50:
+		case MMC_TIMING_UHS_SDR104:
+		case MMC_TIMING_UHS_DDR50:
+		case MMC_TIMING_MMC_HS200:
+			/* _sdhost_enable_hispd(host->ioaddr); */
+			_sdhost_set_uhs_mode(host->ioaddr, ios->timing -
+				MMC_TIMING_UHS_SDR12 + __TIMING_MODE_SDR12);
+			break;
+		default:
+			break;
+		}
+		/* 3 open SD clock */
+		_sdhost_sd_clk_on(host->ioaddr);
+		host->ios.timing = ios->timing;
+	}
+
+	mdelay(100);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+}
+
+int sdhost_get_ro(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+	/*read & write */
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+	return 0;
+}
+
+int sdhost_get_cd(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int gpio_cd;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (host->mmc->caps & MMC_CAP_NONREMOVABLE) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		return 1;
+	}
+
+	gpio_cd = mmc_gpio_get_cd(host->mmc);
+	if (IS_ERR_VALUE(gpio_cd))
+		gpio_cd = 1;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+	return !!gpio_cd;
+}
+
+int sdhost_card_busy(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u32 present_state;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Check whether DAT[3:0] is 0000 */
+	present_state = _sdhost_readl(host->ioaddr, SDHOST_32_PRES_STATE);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+	return !(present_state & _DAT_LVL_MASK);
+}
+
+void sdhost_hw_reset(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* close LDO and open LDO again. */
+	signal_voltage_on_off(host, 0);
+	if (mmc->supply.vmmc)
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
+	mdelay(50);
+	if (mmc->supply.vmmc)
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc,
+				      host->ios.vdd);
+
+	signal_voltage_on_off(host, 1);
+	mdelay(50);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+}
+
+const struct mmc_host_ops sdhost_ops = {
+	.request = sdhost_request,
+	.set_ios = sdhost_set_ios,
+	.get_ro = sdhost_get_ro,
+	.get_cd = sdhost_get_cd,
+
+	.start_signal_voltage_switch = sdhost_set_vqmmc,
+	.card_busy = sdhost_card_busy,
+	.hw_reset = sdhost_hw_reset,
+};
+
+void get_caps_info(struct sdhost_host *host, struct sdhost_caps_data *pdata)
+{
+	host->device_name = pdata->name;
+	host->ocr_avail = pdata->ocr_avail;
+	host->caps = pdata->caps;
+	host->caps2 = pdata->caps2;
+	host->pm_caps = pdata->pm_caps;
+	host->base_clk = pdata->base_clk;
+	host->signal_default_voltage = pdata->signal_default_voltage;
+}
+
+int get_basic_resource(struct platform_device *pdev, struct sdhost_host *host)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	uint32_t sdhost_delay[3];
+	struct sdhost_caps_data *pdata;
+	const struct of_device_id *of_id;
+	int ret;
+
+	of_id = of_match_node(sdhost_of_match, np);
+	if (!of_id) {
+		dev_err(&pdev->dev, "failed to match node\n");
+		return -ENODEV;
+	}
+	pdata = (struct sdhost_caps_data *)of_id->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	host->ioaddr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	host->mapbase = res->start;
+	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq < 0)
+		return host->irq;
+
+#if 0
+	host->clk = of_clk_get(np, 0);
+	if (IS_ERR_OR_NULL(host->clk))
+		return PTR_ERR(host->clk);
+
+	host->clk_parent = of_clk_get(np, 1);
+	if (IS_ERR_OR_NULL(host->clk_parent))
+		return PTR_ERR(host->clk_parent);
+#endif
+
+	get_caps_info(host, pdata);
+	host->detect_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+	if (!gpio_is_valid(host->detect_gpio))
+		host->detect_gpio = -1;
+
+	ret = of_property_read_u32_array(np, "sprd,delay", sdhost_delay, 3);
+	if (!ret) {
+		host->write_delay = sdhost_delay[0];
+		host->read_pos_delay = sdhost_delay[1];
+		host->read_neg_delay = sdhost_delay[2];
+	} else
+		dev_err(&pdev->dev, "can not read the property of sprd delay\n");
+
+	return 0;
+}
+
+int get_external_resource(struct sdhost_host *host)
+{
+	int err;
+	struct mmc_host *mmc = host->mmc;
+
+	host->dma_mask = DMA_BIT_MASK(64);
+	host->data_time_out_val = 0;
+
+	/* 1 LDO */
+	mmc_regulator_get_supply(mmc);
+	if (IS_ERR_OR_NULL(mmc->supply.vmmc)) {
+		pr_err("%s(%s): no vmmc regulator found\n",
+		       __func__, host->device_name);
+		mmc->supply.vmmc = NULL;
+	}
+	if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) {
+		pr_err("%s(%s): no vqmmc regulator found\n",
+		       __func__, host->device_name);
+		mmc->supply.vqmmc = NULL;
+	} else {
+		regulator_is_supported_voltage(mmc->supply.vqmmc,
+			host->signal_default_voltage,
+			host->signal_default_voltage);
+		regulator_set_voltage(mmc->supply.vqmmc,
+			host->signal_default_voltage,
+			host->signal_default_voltage);
+	}
+	host->mmc = mmc;
+
+#if 0
+	/* 2 clock */
+	clk_set_parent(host->clk, host->clk_parent);
+	clk_prepare_enable(host->clk);
+#endif
+	/* 3 reset sdio */
+	_reset_ios(host);
+	err = devm_request_irq(&host->pdev->dev, host->irq, _irq_func,
+			       IRQF_SHARED, mmc_hostname(host->mmc), host);
+	if (err)
+		return err;
+	tasklet_init(&host->finish_tasklet, _tasklet_func, (unsigned long)host);
+	/* 4 init timer */
+	setup_timer(&host->timer, _timeout_func, (unsigned long)host);
+
+	return 0;
+}
+
+int set_mmc_struct(struct sdhost_host *host, struct mmc_host *mmc)
+{
+	int ret = 0;
+
+	mmc = host->mmc;
+	mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+	mmc->ops = &sdhost_ops;
+	mmc->f_max = host->base_clk;
+	mmc->f_min = (unsigned int)(host->base_clk / __CLK_MAX_DIV);
+	mmc->max_busy_timeout = (1 << 27) / (host->base_clk / 1000);
+
+	mmc->caps = host->caps;
+	mmc->caps2 = host->caps2;
+	mmc->pm_caps = host->pm_caps;
+	mmc->pm_flags = host->pm_caps;
+	mmc->ocr_avail = host->ocr_avail;
+	mmc->ocr_avail_sdio = host->ocr_avail;
+	mmc->ocr_avail_sd = host->ocr_avail;
+	mmc->ocr_avail_mmc = host->ocr_avail;
+	mmc->max_current_330 = SDHOST_MAX_CUR;
+	mmc->max_current_300 = SDHOST_MAX_CUR;
+	mmc->max_current_180 = SDHOST_MAX_CUR;
+
+	mmc->max_segs = 1;
+	mmc->max_req_size = 524288;	/* 512k */
+	mmc->max_seg_size = mmc->max_req_size;
+
+	mmc->max_blk_size = 512;
+	mmc->max_blk_count = 65535;
+
+	ret = mmc_of_parse(mmc);
+	if (ret) {
+		mmc_free_host(mmc);
+		pr_info("parse sprd %s controller fail\n", host->device_name);
+		return ret;
+	}
+
+	pr_info("%s(%s): ocr avail = 0x%x\n"
+		"base clock = %u, pm_caps = 0x%x\n"
+		"caps: 0x%x, caps2: 0x%x\n",
+		__func__, host->device_name, mmc->ocr_avail,
+		host->base_clk, host->pm_caps, mmc->caps, mmc->caps2);
+
+	return ret;
+}
+
+int sdhost_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct sdhost_host *host;
+	int ret;
+
+	/* globe resource */
+	mmc = mmc_alloc_host(sizeof(struct sdhost_host), &pdev->dev);
+	if (!mmc) {
+		dev_err(&pdev->dev, "no memory for MMC host\n");
+		return -ENOMEM;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->pdev = pdev;
+	spin_lock_init(&host->lock);
+	platform_set_drvdata(pdev, host);
+
+	/* get sdio irq and sdio iomem */
+	ret = get_basic_resource(pdev, host);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to get basic resource: %d\n", ret);
+		return ret;
+	}
+
+	ret = get_external_resource(host);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to get external resource: %d\n", ret);
+		return ret;
+	}
+
+	ret = set_mmc_struct(host, mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to set mmc struct: %d\n", ret);
+		return ret;
+	}
+
+	pm_runtime_setting(pdev, host);
+
+	/*add host */
+	mmiowb();
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret);
+		mmc_free_host(mmc);
+	}
+
+	if (-1 != host->detect_gpio)
+		mmc_gpio_request_cd(mmc, host->detect_gpio, 0);
+
+	sdhost_add_debugfs(host);
+
+	dev_info(&pdev->dev,
+		 "Spreadtrum %s host controller at 0x%08lx irq %d\n",
+		 host->device_name, host->mapbase, host->irq);
+
+	return ret;
+}
+
+void sdhost_shutdown(struct platform_device *pdev)
+{
+}
+
+const struct dev_pm_ops sdhost_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(_pm_suspend, _pm_resume)
+	SET_RUNTIME_PM_OPS(_runtime_suspend,
+			       _runtime_resume, _runtime_idle)
+};
+
+MODULE_DEVICE_TABLE(of, sdhost_of_match);
+
+struct platform_driver sdhost_driver = {
+	.probe = sdhost_probe,
+	.shutdown = sdhost_shutdown,
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .pm = &sdhost_dev_pm_ops,
+		   .name = DRIVER_NAME,
+		   .of_match_table = of_match_ptr(sdhost_of_match),
+		   },
+};
+
+module_platform_driver(sdhost_driver);
+
+MODULE_DESCRIPTION("Spreadtrum sdio host controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sprd_sdhost.h b/drivers/mmc/host/sprd_sdhost.h
new file mode 100644
index 0000000..5778b6d
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost.h
@@ -0,0 +1,507 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef __SDHOST_H_
+#define __SDHOST_H_
+
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/scatterlist.h>
+#include <linux/types.h>
+
+/* Controller flag */
+#define SDHOST_FLAG_EN_ACMD12	1
+#define SDHOST_FLAG_EN_ACMD23	1
+#define SDHOST_FLAG_USE_ADMA	1
+
+/* Controller registers */
+static inline void _sdhost_writeb(void __iomem *ioadr, uint8_t val, int reg)
+{
+		writeb_relaxed(val, ioadr + reg);
+}
+static inline void _sdhost_writew(void __iomem *ioadr, uint16_t val, int reg)
+{
+		writew_relaxed(val, ioadr + reg);
+}
+static inline void _sdhost_writel(void __iomem *ioadr, uint32_t val, int reg)
+{
+		writel_relaxed(val, ioadr + reg);
+}
+static inline uint8_t _sdhost_readb(void __iomem *ioadr, int reg)
+{
+		return readb_relaxed(ioadr + reg);
+}
+static inline uint16_t _sdhost_readw(void __iomem *ioadr, int reg)
+{
+		return readw_relaxed(ioadr + reg);
+}
+static inline uint32_t _sdhost_readl(void __iomem *ioadr, int reg)
+{
+		return readl_relaxed(ioadr + reg);
+}
+#define SDHOST_32_SYS_ADDR	0x00
+/* used in cmd23 with ADMA in sdio 3.0 */
+#define SDHOST_32_BLK_CNT	0x00
+#define SDHOST_16_BLK_CNT	0x06
+
+static inline void _sdhost_set_16_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
+{
+	writew_relaxed((blk_cnt & 0xFFFF), ioadr + SDHOST_16_BLK_CNT);
+}
+
+static inline void _sdhost_set_32_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
+{
+	writel_relaxed((blk_cnt & 0xFFFFFFFF), ioadr + SDHOST_32_BLK_CNT);
+}
+
+#define SDHOST_16_BLK_SIZE	0x04
+
+static inline void _sdhost_set_blk_size(void __iomem *ioadr, uint32_t blk_size)
+{
+	writew_relaxed((blk_size & 0xFFF) | 0x7000, ioadr + SDHOST_16_BLK_SIZE);
+}
+
+#define SDHOST_32_ARG			0x08
+#define SDHOST_16_TR_MODE		0x0C
+#define __ACMD_DIS	0x00
+#define __ACMD12	0x01
+#define __ACMD23	0x02
+static inline void _sdhost_set_trans_mode(
+				void __iomem *io_addr, int if_multi,
+				int if_read, uint16_t auto_cmd,
+				int if_blk_cnt, int if_dma)
+{
+	writew_relaxed(
+		(((if_multi ? 1 : 0) << 5) |
+		((if_read ? 1 : 0) << 4) |
+		(((u16)auto_cmd) << 2) |
+		((if_blk_cnt ? 1 : 0) << 1) |
+		((if_dma ? 1 : 0) << 0)) ,
+		io_addr + SDHOST_16_TR_MODE);
+}
+
+#define SDHOST_16_CMD			0x0E
+#define _CMD_INDEX_CHK			0x0010
+#define _CMD_CRC_CHK			0x0008
+#define _CMD_RSP_NONE			0x0000
+#define _CMD_RSP_136			0x0001
+#define _CMD_RSP_48				0x0002
+#define _CMD_RSP_48_BUSY		0x0003
+#define _RSP0			0
+#define _RSP1_5_6_7	\
+		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48)
+#define _RSP2 \
+		(_CMD_CRC_CHK | _CMD_RSP_136)
+#define _RSP3_4	\
+		_CMD_RSP_48
+#define _RSP1B_5B \
+		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48_BUSY)
+
+static inline void _sdhost_set_cmd(
+				void __iomem *ioadr, u32 cmd,
+				int if_has_data, u32 rsp_type)
+{
+	writew_relaxed(
+		((((u16)(cmd)) << 8) |
+		(((if_has_data) ? 1 : 0) << 5) |
+		((u16)(rsp_type))),
+		(ioadr) + SDHOST_16_CMD);
+}
+
+#define SDHOST_32_TR_MODE_AND_CMD		0x0C
+
+static inline void _sdhost_set_trans_and_cmd(
+				void __iomem *ioadr, int if_multi,
+				int if_read, uint16_t auto_cmd,
+				int if_blk_cnt, int if_dma, u32 cmd,
+				int if_has_data, u32 rsp_type)
+{
+	writel_relaxed(
+		((((if_multi) ? 1 : 0) << 5) |
+		(((if_read) ? 1 : 0) << 4) |
+		(((u32)(auto_cmd)) << 2) |
+		(((if_blk_cnt) ? 1 : 0) << 1) |
+		(((if_dma) ? 1 : 0) << 0) |
+		(((u32)(cmd)) << 24) |
+		(((if_has_data) ? 1 : 0) << 21) |
+		(((u32)(rsp_type)) << 16)) ,
+		ioadr + SDHOST_32_TR_MODE_AND_CMD);
+}
+
+#define SDHOST_32_RESP	0x10
+#define SDHOST_32_PRES_STATE	0x24
+#define  _DAT_LVL_MASK		0x00F00000
+#define SDHOST_8_HOST_CTRL	0x28
+#define __8_BIT_MOD		0x20
+#define __4_BIT_MOD		0x02
+#define __1_BIT_MOD	0x00
+#define __SDMA_MOD		0x00
+#define __32_ADMA_MOD	0x10
+#define __64_ADMA_MOD	0x18
+#define __HISPD_MOD		0x04
+
+static inline void _sdhost_set_buswidth(void __iomem *ioadr, uint32_t buswidth)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl &= (~(__8_BIT_MOD | __4_BIT_MOD | __1_BIT_MOD));
+	switch (buswidth) {
+	case MMC_BUS_WIDTH_1:
+		ctrl |= __1_BIT_MOD;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl |= __4_BIT_MOD;
+		break;
+	case MMC_BUS_WIDTH_8:
+		ctrl |= __8_BIT_MOD;
+		break;
+	default:
+		BUG_ON(1);
+		break;
+	}
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+static inline void _sdhost_set_dma(void __iomem *ioadr, u8 dmaMod)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl &= (~(__SDMA_MOD | __32_ADMA_MOD | __64_ADMA_MOD));
+	ctrl |= dmaMod;
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+static inline void _sdhost_enable_hispd(void __iomem *ioadr)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl |= __HISPD_MOD;
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+/*#define SDHOST_8_PWR_CTRL     0x29    */ /* not used */
+#define SDHOST_8_BLK_GAP		0x2A	/* not used */
+#define SDHOST_8_WACKUP_CTRL	0x2B	/* not used */
+#define SDHOST_16_CLOCK_CTRL	0x2C
+#define __CLK_IN_EN		0x0001
+#define __CLK_IN_STABLE	0x0002
+#define __CLK_SD			0x0004
+#define __CLK_MAX_DIV		2046
+
+static inline void _sdhost_all_clk_off(void __iomem *ioadr)
+{
+	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline void _sdhost_sd_clk_off(void __iomem *ioadr)
+{
+	u16 ctrl = 0;
+
+	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl &= (~__CLK_SD);
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline void _sdhost_sd_clk_on(void __iomem *ioadr)
+{
+	u16 ctrl = 0;
+
+	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl |= __CLK_SD;
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline uint32_t _sdhost_calc_div(uint32_t base_clk, uint32_t clk)
+{
+	uint32_t N;
+
+	if (base_clk <= clk)
+		return 0;
+
+	N = (uint32_t) (base_clk / clk);
+	N = (N >> 1);
+	if (N)
+		N--;
+	if ((base_clk / ((N + 1) << 1)) > clk)
+		N++;
+	if (__CLK_MAX_DIV < N)
+		N = __CLK_MAX_DIV;
+	return N;
+}
+
+static inline void _sdhost_clk_set_and_on(void __iomem *ioadr, uint32_t div)
+{
+	u16 ctrl = 0;
+
+	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl |= (uint16_t) (((div & 0x300) >> 2) | ((div & 0xFF) << 8));
+	ctrl |= __CLK_IN_EN;
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+	while (!(__CLK_IN_STABLE & readw_relaxed(ioadr +
+						SDHOST_16_CLOCK_CTRL)))
+		;
+}
+
+#define SDHOST_8_TIMEOUT		0x2E
+#define __TIMEOUT_MAX_VAL		0xe
+static inline uint8_t _sdhost_calc_timeout(uint32_t base_clk,
+						uint32_t div, uint32_t seconds)
+{
+	uint32_t sd_clk = seconds * (base_clk / ((div + 1) << 1));
+	uint8_t i;
+
+	for (i = 0; i < 15; i++) {
+		if ((((uint32_t) 1) << (16 + i)) > sd_clk) {
+			if (0 != i)
+				i--;
+			break;
+		}
+	}
+	return i;
+}
+
+#define SDHOST_8_RESET			0x2F
+#define  _RST_ALL		0x01
+#define  _RST_CMD		0x02
+#define  _RST_DATA		0x04
+#define  _RST_EMMC		0x08	/*spredtrum define it byself */
+
+static inline void _sdhost_reset(void __iomem *ioadr, uint8_t mask)
+{
+	writeb_relaxed((_RST_EMMC | mask), ioadr + SDHOST_8_RESET);
+	while (_sdhost_readb(ioadr, SDHOST_8_RESET) & mask)
+		;
+}
+
+/* spredtrum define it byself */
+static inline void _sdhost_reset_emmc(void __iomem *ioadr)
+{
+	writeb_relaxed(0, ioadr + SDHOST_8_RESET);
+	mdelay(2);
+	writeb_relaxed(_RST_EMMC, ioadr + SDHOST_8_RESET);
+}
+
+#define SDHOST_32_INT_STATUS		0x30
+#define SDHOST_32_INT_STATUS_EN	0x34
+#define SDHOST_32_INT_SIGNAL_EN	0x38
+#define _INT_CMD_END		0x00000001
+#define _INT_TRAN_END		0x00000002
+#define _INT_DMA_END		0x00000008
+#define _INT_WR_RDY			0x00000010	/*not used */
+#define _INT_RD_RDY			0x00000020	/* not used */
+#define _INT_ERR				0x00008000
+#define _INT_ERR_CMD_TIMEOUT	0x00010000
+#define _INT_ERR_CMD_CRC		0x00020000
+#define _INT_ERR_CMD_END		0x00040000
+#define _INT_ERR_CMD_INDEX	0x00080000
+#define _INT_ERR_DATA_TIMEOUT	0x00100000
+#define _INT_ERR_DATA_CRC		0x00200000
+#define _INT_ERR_DATA_END		0x00400000
+#define _INT_ERR_CUR_LIMIT		0x00800000
+#define _INT_ERR_ACMD			0x01000000
+#define _INT_ERR_ADMA			0x02000000
+
+/* used in irq */
+#define _INT_FILTER_ERR_CMD \
+		(_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX)
+#define _INT_FILTER_ERR_DATA \
+		(_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
+		_INT_ERR_DATA_END)
+#define _INT_FILTER_ERR \
+		(_INT_ERR | _INT_FILTER_ERR_CMD | \
+		_INT_FILTER_ERR_DATA | _INT_ERR_ACMD | \
+		_INT_ERR_ADMA)
+#define _INT_FILTER_NORMAL \
+		(_INT_CMD_END | _INT_TRAN_END)
+
+/* used for setting */
+#define _DATA_FILTER_RD_SIGLE \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC | _INT_ERR_DATA_END)
+#define _DATA_FILTER_RD_MULTI \
+		(_INT_TRAN_END | _INT_DMA_END | _INT_ERR | \
+		_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
+		_INT_ERR_DATA_END)
+#define _DATA_FILTER_WR_SIGLE \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC)
+#define _DATA_FILTER_WR_MULT \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC)
+#define _CMD_FILTER_R0 \
+		(_INT_CMD_END)
+#define _CMD_FILTER_R2 \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END)
+#define _CMD_FILTER_R3 \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_END)
+#define _CMD_FILTER_R1_R4_R5_R6_R7 \
+		(_INT_CMD_END | _INT_ERR | _INT_ERR_CMD_TIMEOUT | \
+		_INT_ERR_CMD_CRC | _INT_ERR_CMD_END | \
+		_INT_ERR_CMD_INDEX)
+#define _CMD_FILTER_R1B \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX | \
+		_INT_TRAN_END | _INT_ERR_DATA_TIMEOUT)
+
+
+static inline void _sdhost_disable_all_int(void __iomem *ioadr)
+{
+	writel_relaxed(0x0, ioadr + SDHOST_32_INT_SIGNAL_EN);
+	writel_relaxed(0x0, ioadr + SDHOST_32_INT_STATUS_EN);
+	writel_relaxed(0xFFFFFFFF, ioadr + SDHOST_32_INT_STATUS);
+}
+
+static inline void _sdhost_enable_int(void __iomem *ioadr, u32 mask)
+{
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS_EN);
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_SIGNAL_EN);
+}
+
+static inline void _sdhost_clear_int(void __iomem *ioadr, u32 mask)
+{
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS);
+}
+
+#define SDHOST_16_ACMD_ERR		0x3C
+
+#define SDHOST_16_HOST_CTRL_2		0x3E
+#define __TIMING_MODE_SDR12		0x0000
+#define __TIMING_MODE_SDR25		0x0001
+#define __TIMING_MODE_SDR50		0x0002
+#define __TIMING_MODE_SDR104	0x0003
+#define __TIMING_MODE_DDR50	0x0004
+#define __TIMING_MODE_SDR200	0x0005
+
+static inline void _sdhost_set_uhs_mode(void __iomem *ioadr, uint16_t mode)
+{
+	writew_relaxed(mode, ioadr +  SDHOST_16_HOST_CTRL_2);
+}
+
+#define SDHOST_MAX_CUR	1020
+
+/* following register is defined by spreadtrum self.
+ * It is not standard register of SDIO.
+ */
+static inline void _sdhost_set_delay(
+				void __iomem *ioadr, uint32_t write_delay,
+				uint32_t read_pos_delay,
+				uint32_t read_neg_delay)
+{
+	writel_relaxed(write_delay, ioadr + 0x80);
+	writel_relaxed(read_pos_delay, ioadr + 0x84);
+	writel_relaxed(read_neg_delay, ioadr + 0x88);
+}
+
+#define SDHOST_32_CAPS	0x40
+#define  __TIMEOUT_CLK_MASK	0x0000003F
+#define  __TIMEOUT_CLK_SHIFT 0
+#define  __TIMEOUT_CLK_UNIT	0x00000080
+#define  __CLOCK_BASE_MASK	0x00003F00
+#define  __CLOCK_V3_BASE_MASK	0x0000FF00
+#define  __CLOCK_BASE_SHIFT	8
+#define  __MAX_BLOCK_MASK	0x00030000
+#define  __MAX_BLOCK_SHIFT  16
+#define  __CAN_DO_8BIT	0x00040000
+#define  __CAN_DO_ADMA2	0x00080000
+#define  __CAN_DO_ADMA1	0x00100000
+#define  __CAN_DO_HISPD	0x00200000
+#define  __CAN_DO_SDMA	0x00400000
+#define  __CAN_VDD_330	0x01000000
+#define  __CAN_VDD_300	0x02000000
+#define  __CAN_VDD_180	0x04000000
+#define  __CAN_64BIT	0x10000000
+
+#define SDHOST_32_CAPS2	0x44
+#define  __SUPPORT_SDR50	0x00000001
+#define  __SUPPORT_SDR104	0x00000002
+#define  __SUPPORT_DDR50	0x00000004
+#define  __DRIVER_TYPE_A	0x00000010
+#define  __DRIVER_TYPE_C	0x00000020
+#define  __DRIVER_TYPE_D	0x00000040
+#define  __RETUNING_TIMER_COUNT_MASK	0x00000F00
+#define  __RETUNING_TIMER_COUNT_SHIFT	8
+#define  __USE_SDR50_TUNING			0x00002000
+#define  __RETUNING_MODE_MASK		0x0000C000
+#define  __RETUNING_MODE_SHIFT		14
+#define  __CLOCK_MUL_MASK	0x00FF0000
+#define  __CLOCK_MUL_SHIFT	16
+
+
+/**********************************************************\
+ *
+ * Controller block structure
+ *
+\**********************************************************/
+struct sdhost_host {
+	/* --globe resource--- */
+	spinlock_t lock;
+	struct mmc_host *mmc;
+
+	/*--basic resource-- */
+	void __iomem *ioaddr;
+	int irq;
+	const char *device_name;
+	struct platform_device *pdev;
+	unsigned long mapbase;
+
+	int detect_gpio;
+	uint32_t ocr_avail;
+	char *clk_name;
+	char *clk_parent_name;
+	uint32_t base_clk;
+	uint32_t caps;
+	uint32_t caps2;
+	uint32_t pm_caps;
+	uint32_t write_delay;
+	uint32_t read_pos_delay;
+	uint32_t read_neg_delay;
+
+	/* --extern resource getted by base resource-- */
+	uint64_t dma_mask;
+	uint8_t data_time_out_val;
+	uint32_t signal_default_voltage;
+	bool sdio_1_8v_signal_enabled;
+	struct clk *clk;
+	struct clk *clk_parent;
+	struct tasklet_struct finish_tasklet;
+	struct timer_list timer;
+
+	/* --runtime param-- */
+	uint32_t int_filter;
+	struct mmc_ios ios;
+	struct mmc_request *mrq;	/* Current request */
+	struct mmc_command *cmd;	/* Current command */
+	uint16_t auto_cmd_mode;
+
+	/*--debugfs-- */
+	struct dentry *debugfs_root;
+};
+
+#endif /* __SDHOST_H_ */
diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.c b/drivers/mmc/host/sprd_sdhost_debugfs.c
new file mode 100644
index 0000000..bc04aea
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost_debugfs.c
@@ -0,0 +1,213 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost_debugfs.c - Secure Digital Host
+ * Controller Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+
+#include "sprd_sdhost_debugfs.h"
+
+#define ELEMENT(v) {v, #v}
+#define ELEMENT_NUM	26
+struct {
+	uint32_t bit;
+	char *caps_name;
+} caps_info[3][ELEMENT_NUM] = {
+	{
+		ELEMENT(MMC_CAP_4_BIT_DATA),
+		ELEMENT(MMC_CAP_MMC_HIGHSPEED),
+		ELEMENT(MMC_CAP_SD_HIGHSPEED),
+		ELEMENT(MMC_CAP_SDIO_IRQ),
+		ELEMENT(MMC_CAP_SPI),
+		ELEMENT(MMC_CAP_NEEDS_POLL),
+		ELEMENT(MMC_CAP_8_BIT_DATA),
+		ELEMENT(MMC_CAP_AGGRESSIVE_PM),
+		ELEMENT(MMC_CAP_NONREMOVABLE),
+		ELEMENT(MMC_CAP_WAIT_WHILE_BUSY),
+		ELEMENT(MMC_CAP_ERASE),
+		ELEMENT(MMC_CAP_1_8V_DDR),
+		ELEMENT(MMC_CAP_1_2V_DDR),
+		ELEMENT(MMC_CAP_POWER_OFF_CARD),
+		ELEMENT(MMC_CAP_BUS_WIDTH_TEST),
+		ELEMENT(MMC_CAP_UHS_SDR12),
+		ELEMENT(MMC_CAP_UHS_SDR25),
+		ELEMENT(MMC_CAP_UHS_SDR50),
+		ELEMENT(MMC_CAP_UHS_SDR104),
+		ELEMENT(MMC_CAP_UHS_DDR50),
+		ELEMENT(MMC_CAP_RUNTIME_RESUME),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_A),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_C),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_D),
+		ELEMENT(MMC_CAP_CMD23),
+		ELEMENT(MMC_CAP_HW_RESET)
+	}, {
+		ELEMENT(MMC_CAP2_BOOTPART_NOACC),
+		ELEMENT(MMC_CAP2_FULL_PWR_CYCLE),
+		ELEMENT(MMC_CAP2_HS200_1_8V_SDR),
+		ELEMENT(MMC_CAP2_HS200_1_2V_SDR),
+		ELEMENT(MMC_CAP2_HS200),
+		ELEMENT(MMC_CAP2_HC_ERASE_SZ),
+		ELEMENT(MMC_CAP2_CD_ACTIVE_HIGH),
+		ELEMENT(MMC_CAP2_RO_ACTIVE_HIGH),
+		ELEMENT(MMC_CAP2_PACKED_RD),
+		ELEMENT(MMC_CAP2_PACKED_WR),
+		ELEMENT(MMC_CAP2_PACKED_CMD),
+		ELEMENT(MMC_CAP2_NO_PRESCAN_POWERUP),
+		ELEMENT(MMC_CAP2_HS400_1_8V),
+		ELEMENT(MMC_CAP2_HS400_1_2V),
+		ELEMENT(MMC_CAP2_HS400),
+		ELEMENT(MMC_CAP2_SDIO_IRQ_NOTHREAD)
+	}, {
+		ELEMENT(MMC_PM_KEEP_POWER),
+		ELEMENT(MMC_PM_WAKE_SDIO_IRQ),
+		ELEMENT(MMC_PM_IGNORE_PM_NOTIFY)
+	}
+
+};
+
+static int sdhost_param_show(struct seq_file *s, void *data)
+{
+	struct sdhost_host *host = s->private;
+	uint32_t i;
+
+	seq_printf(s, "\n"
+		   "ioaddr\t= 0x%p\n"
+		   "irq\t= %d\n"
+		   "device_name\t= %s\n"
+		   "detect_gpio\t= %d\n"
+		   "base_clk\t= %d\n"
+		   "write_delay\t= %d\n"
+		   "read_pos_delay\t= %d\n"
+		   "read_neg_delay\t= %d\n",
+		   host->ioaddr, host->irq, host->device_name,
+		   host->detect_gpio, host->base_clk,
+		   host->write_delay, host->read_pos_delay,
+		   host->read_neg_delay);
+	seq_printf(s, "OCR 0x%x\n", host->ocr_avail);
+
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[0][i].bit ==
+			(host->caps & caps_info[0][i].bit))
+					&& caps_info[0][i].bit)
+			seq_printf(s, "caps:%s\n", caps_info[0][i].caps_name);
+	}
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[1][i].bit ==
+			(host->caps2 & caps_info[1][i].bit))
+						&& caps_info[1][i].bit)
+			seq_printf(s, "caps2:%s\n", caps_info[1][i].caps_name);
+	}
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[2][i].bit ==
+				(host->pm_caps & caps_info[2][i].bit))
+							&& caps_info[2][i].bit)
+			seq_printf(s, "pm_caps:%s\n",
+					caps_info[2][i].caps_name);
+	}
+
+	return 0;
+}
+
+static int sdhost_param_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sdhost_param_show, inode->i_private);
+}
+
+static const struct file_operations sdhost_param_fops = {
+	.open = sdhost_param_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+#define SDHOST_ATTR(PARAM_NAME)	\
+	static int sdhost_##PARAM_NAME##_get(void *data, u64 *val)\
+	{ \
+		struct sdhost_host *host = data;\
+		*val = (u64)host->PARAM_NAME;\
+		return 0;\
+	} \
+	static int sdhost_##PARAM_NAME##_set(void *data, u64 val)\
+	{ \
+		struct sdhost_host *host = data;\
+		if (0x7F >= (uint32_t)val) { \
+			host->PARAM_NAME = (uint32_t)val;\
+			_sdhost_set_delay(host->ioaddr, \
+							host->write_delay, \
+							host->read_pos_delay, \
+							host->read_neg_delay);\
+		} \
+		return 0;\
+	} \
+	DEFINE_SIMPLE_ATTRIBUTE(sdhost_##PARAM_NAME##_fops,\
+						sdhost_##PARAM_NAME##_get,\
+						sdhost_##PARAM_NAME##_set,\
+						"%llu\n")
+
+SDHOST_ATTR(write_delay);
+SDHOST_ATTR(read_pos_delay);
+SDHOST_ATTR(read_neg_delay);
+
+void sdhost_add_debugfs(struct sdhost_host *host)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(host->device_name, NULL);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		return;
+
+	host->debugfs_root = root;
+
+	if (!debugfs_create_file("basic_resource", S_IRUSR, root,
+				(void *)host, &sdhost_param_fops))
+		goto err;
+	if (!debugfs_create_file("write_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_write_delay_fops))
+		goto err;
+	if (!debugfs_create_file("read_pos_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_read_pos_delay_fops))
+		goto err;
+	if (!debugfs_create_file("read_neg_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_read_neg_delay_fops))
+		goto err;
+	return;
+
+err:
+	debugfs_remove_recursive(root);
+	host->debugfs_root = 0;
+}
+
+void dump_sdio_reg(struct sdhost_host *host)
+{
+	unsigned int i;
+
+	if (!host->mmc->card)
+		return;
+
+	pr_info("sdhost" ": =========== REGISTER DUMP (%s)========\n",
+		host->device_name);
+
+	for (i = 0; i < 0x09; i++) {
+		pr_info("sdhost" ": 0x%08x | 0x%08x | 0x%08x | 0x%08x\n\r",
+		       _sdhost_readl(host->ioaddr, 0 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 4 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 8 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 12 + (i << 4))
+		    );
+	}
+
+	pr_info("sdhost" ": ==================================\n");
+	mdelay(100);
+}
diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.h b/drivers/mmc/host/sprd_sdhost_debugfs.h
new file mode 100644
index 0000000..0063e1b
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost_debugfs.h
@@ -0,0 +1,27 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost_debugfs.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef _SDHOST_DEBUGFS_H_
+#define _SDHOST_DEBUGFS_H_
+
+#include "sprd_sdhost.h"
+
+#ifdef CONFIG_DEBUG_FS
+void sdhost_add_debugfs(struct sdhost_host *host);
+void dump_sdio_reg(struct sdhost_host *host);
+#else
+static inline void sdhost_add_debugfs(struct sdhost_host *host) {}
+static inline void dump_sdio_reg(struct sdhost_host *host) {}
+#endif
+
+#endif
-- 
1.7.9.5

[RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Chunyan Zhang]

From: Billows Wu <billows.wu@spreadtrum.com>

The Spreadtrum MMC host driver is used to support EMMC, SD, and
SDIO types of memory cards.

Signed-off-by: Billows Wu <billows.wu@spreadtrum.com>
Reviewed-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
 drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
 drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
 drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
 6 files changed, 2027 insertions(+)
 create mode 100644 drivers/mmc/host/sprd_sdhost.c
 create mode 100644 drivers/mmc/host/sprd_sdhost.h
 create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
 create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h

diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
new file mode 100644
index 0000000..e7a66e8
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost.c
@@ -0,0 +1,1270 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+
+#include "sprd_sdhost.h"
+#include "sprd_sdhost_debugfs.h"
+
+#define DRIVER_NAME "sdhost"
+#define SDHOST_CAPS \
+		(MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
+		MMC_CAP_ERASE |	 MMC_CAP_UHS_SDR50 | \
+		MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
+
+struct sdhost_caps_data {
+	char *name;
+	uint32_t ocr_avail;
+	uint32_t caps;
+	uint32_t caps2;
+	uint32_t pm_caps;
+	/* TODO: we will obtain these values from regulator and clock
+	 * phandles after LDO and clock function is OK
+	 */
+	uint32_t base_clk;
+	uint32_t signal_default_voltage;
+};
+
+struct sdhost_caps_data sd_caps_info = {
+	.name = "sd",
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
+	.caps = SDHOST_CAPS,
+	.caps2 = MMC_CAP2_HC_ERASE_SZ,
+	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
+	.base_clk = 192000000,
+	.signal_default_voltage = 3000000,
+};
+
+struct sdhost_caps_data wifi_caps_info = {
+	.name = "wifi",
+	.ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
+	    MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,
+	.pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
+	.base_clk = 76000000,
+};
+
+struct sdhost_caps_data emmc_caps_info = {
+	.name = "emmc",
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
+	.caps = SDHOST_CAPS |
+	    MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
+	    MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
+	.caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
+	.pm_caps = MMC_PM_WAKE_SDIO_IRQ,
+	.base_clk = 192000000,
+	.signal_default_voltage = 1800000,
+};
+
+const struct of_device_id sdhost_of_match[] = {
+	{.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
+	{.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
+	{.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
+	{ /* sentinel */ }
+};
+
+void _reset_ios(struct sdhost_host *host)
+{
+	_sdhost_disable_all_int(host->ioaddr);
+
+	host->ios.clock = 0;
+	host->ios.vdd = 0;
+	/* host->ios.bus_mode    = MMC_BUSMODE_OPENDRAIN; */
+	/* host->ios.chip_select = MMC_CS_DONTCARE; */
+	host->ios.power_mode = MMC_POWER_OFF;
+	host->ios.bus_width = MMC_BUS_WIDTH_1;
+	host->ios.timing = MMC_TIMING_LEGACY;
+	host->ios.signal_voltage = MMC_SIGNAL_VOLTAGE_330;
+	/*host->ios.drv_type    = MMC_SET_DRIVER_TYPE_B; */
+
+	_sdhost_reset(host->ioaddr, _RST_ALL);
+	_sdhost_set_delay(host->ioaddr, host->write_delay,
+			  host->read_pos_delay, host->read_neg_delay);
+}
+
+int __local_pm_suspend(struct sdhost_host *host)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	_sdhost_disable_all_int(host->ioaddr);
+	_sdhost_all_clk_off(host->ioaddr);
+	clk_disable(host->clk);
+	/* wake lock */
+	spin_unlock_irqrestore(&host->lock, flags);
+	clk_unprepare(host->clk);
+	synchronize_irq(host->irq);
+
+	return 0;
+}
+
+int __local_pm_resume(struct sdhost_host *host)
+{
+	unsigned long flags;
+
+	clk_prepare(host->clk);
+	spin_lock_irqsave(&host->lock, flags);
+	clk_enable(host->clk);
+	if (host->ios.clock) {
+		_sdhost_sd_clk_off(host->ioaddr);
+		_sdhost_clk_set_and_on(host->ioaddr,
+				       _sdhost_calc_div(host->base_clk,
+							host->ios.clock));
+		_sdhost_sd_clk_on(host->ioaddr);
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return 0;
+}
+
+void pm_runtime_setting(struct platform_device *pdev, struct sdhost_host *host)
+{
+	pm_runtime_set_active(&pdev->dev);
+#ifdef CONFIG_PM_RUNTIME
+	pm_suspend_ignore_children(&pdev->dev, true);
+#endif
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+}
+
+int _runtime_get(struct sdhost_host *host)
+{
+	return pm_runtime_get_sync(host->mmc->parent);
+}
+
+int _runtime_put(struct sdhost_host *host)
+{
+	pm_runtime_mark_last_busy(host->mmc->parent);
+	return pm_runtime_put_autosuspend(host->mmc->parent);
+}
+
+int _runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	return __local_pm_suspend(host);
+}
+
+int _runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	return __local_pm_resume(host);
+}
+
+int _runtime_idle(struct device *dev)
+{
+	return 0;
+}
+
+int _pm_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+
+	_runtime_get(host);
+
+	host->mmc->pm_flags = host->mmc->pm_caps;
+
+	pr_debug("%s(%s):\n"
+		 "sdhost clock = %d\n"
+		 "sdhost vdd = %d\n"
+		 "sdhost bus_mode = %d\n"
+		 "sdhost chip_select = %d\n"
+		 "sdhost power_mode = %d\n"
+		 "sdhost bus_width = %d\n"
+		 "sdhost timing = %d\n"
+		 "sdhost signal_voltage = %d\n"
+		 "sdhost drv_type = %d\n",
+		 __func__, host->device_name,
+		 host->ios.clock,
+		 host->ios.vdd,
+		 host->ios.bus_mode,
+		 host->ios.chip_select,
+		 host->ios.power_mode,
+		 host->ios.bus_width,
+		 host->ios.timing,
+		 host->ios.signal_voltage, host->ios.drv_type);
+
+	return __local_pm_suspend(host);
+}
+
+int _pm_resume(struct device *dev)
+{
+	struct platform_device *pdev =
+	    container_of(dev, struct platform_device, dev);
+	struct sdhost_host *host = platform_get_drvdata(pdev);
+	struct mmc_ios ios;
+
+	__local_pm_resume(host);
+
+	ios = host->mmc->ios;
+	_reset_ios(host);
+	host->mmc->ops->set_ios(host->mmc, &ios);
+
+	pr_debug("%s(%s):\n"
+		 "sdhost clock = %d\n"
+		 "sdhost vdd = %d\n"
+		 "sdhost bus_mode = %d\n"
+		 "sdhost chip_select = %d\n"
+		 "sdhost power_mode = %d\n"
+		 "sdhost bus_width = %d\n"
+		 "sdhost timing = %d\n"
+		 "sdhost signal_voltage = %d\n"
+		 "sdhost drv_type = %d\n",
+		 __func__, host->device_name,
+		 host->ios.clock,
+		 host->ios.vdd,
+		 host->ios.bus_mode,
+		 host->ios.chip_select,
+		 host->ios.power_mode,
+		 host->ios.bus_width,
+		 host->ios.timing,
+		 host->ios.signal_voltage, host->ios.drv_type);
+
+	_runtime_put(host);
+
+	return 0;
+}
+
+void __get_rsp(struct sdhost_host *host)
+{
+	u32 i, offset;
+	unsigned int flags = host->cmd->flags;
+	u32 *resp = host->cmd->resp;
+	void __iomem *addr = host->ioaddr;
+
+	if (!(flags & MMC_RSP_PRESENT))
+		return;
+
+	if (flags & MMC_RSP_136) {
+		/* CRC is stripped so we need to do some shifting. */
+		for (i = 0, offset = 12; i < 3; i++, offset -= 4) {
+			resp[i] =
+			    _sdhost_readl(addr, SDHOST_32_RESP + offset) << 8;
+			resp[i] |=
+			    _sdhost_readb(addr, SDHOST_32_RESP + offset - 1);
+		}
+		resp[3] = _sdhost_readl(addr, SDHOST_32_RESP) << 8;
+	} else {
+		resp[0] = _sdhost_readl(addr, SDHOST_32_RESP);
+	}
+}
+
+void _send_cmd(struct sdhost_host *host, struct mmc_command *cmd)
+{
+	struct mmc_data *data = cmd->data;
+	int sg_cnt;
+	u32 flag = 0;
+	u16 rsp_type = 0;
+	int if_has_data = 0;
+	int if_multi = 0;
+	int if_rd = 0;
+	int if_dma = 0;
+	uint16_t auto_cmd = __ACMD_DIS;
+
+	pr_debug("sdhost %s cmd %d, arg 0x%x, flag 0x%x\n",
+		 host->device_name, cmd->opcode, cmd->arg, cmd->flags);
+	if (cmd->data)
+		pr_debug("sdhost %s block size %d, cnt %d\n",
+			 host->device_name, cmd->data->blksz,
+			 cmd->data->blocks);
+
+	_sdhost_disable_all_int(host->ioaddr);
+
+	if (38 == cmd->opcode) {
+		/* if it is erase command , it's busy time will long,
+		 * so we set long timeout value here.
+		 */
+		mod_timer(&host->timer, jiffies + 10 * HZ);
+		_sdhost_writeb(host->ioaddr, __TIMEOUT_MAX_VAL,
+			       SDHOST_8_TIMEOUT);
+	} else {
+		mod_timer(&host->timer, jiffies + 3 * HZ);
+		_sdhost_writeb(host->ioaddr, host->data_time_out_val,
+			       SDHOST_8_TIMEOUT);
+	}
+
+	host->cmd = cmd;
+	if (data) {
+		/* set data param */
+		WARN_ON((data->blksz * data->blocks > 524288) ||
+		       (data->blksz > host->mmc->max_blk_size) ||
+		       (data->blocks > 65535));
+
+		data->bytes_xfered = 0;
+
+		if_has_data = 1;
+		if_rd = (data->flags & MMC_DATA_READ);
+		if_multi = (mmc_op_multi(cmd->opcode) || data->blocks > 1);
+		if (if_rd && !if_multi)
+			flag = _DATA_FILTER_RD_SIGLE;
+		else if (if_rd && if_multi)
+			flag = _DATA_FILTER_RD_MULTI;
+		else if (!if_rd && !if_multi)
+			flag = _DATA_FILTER_WR_SIGLE;
+		else
+			flag = _DATA_FILTER_WR_MULT;
+
+		if (!host->auto_cmd_mode)
+			flag |= _INT_ERR_ACMD;
+
+		if_dma = 1;
+		auto_cmd = host->auto_cmd_mode;
+		_sdhost_set_blk_size(host->ioaddr, data->blksz);
+
+		sg_cnt = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+				    (data->flags & MMC_DATA_READ) ?
+				    DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		if (1 == sg_cnt) {
+			_sdhost_set_dma(host->ioaddr, __SDMA_MOD);
+			_sdhost_set_16_blk_cnt(host->ioaddr, data->blocks);
+			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
+				       SDHOST_32_SYS_ADDR);
+		} else {
+			WARN_ON(1);
+			flag |= _INT_ERR_ADMA;
+			_sdhost_set_dma(host->ioaddr, __32_ADMA_MOD);
+			_sdhost_set_32_blk_cnt(host->ioaddr, data->blocks);
+			_sdhost_writel(host->ioaddr, sg_dma_address(data->sg),
+				       SDHOST_32_SYS_ADDR);
+		}
+	} else {
+		/* _sdhost_set_trans_mode(host->ioaddr,
+		 * 0, 0, __ACMD_DIS, 0, 0);
+		 */
+	}
+
+	_sdhost_writel(host->ioaddr, cmd->arg, SDHOST_32_ARG);
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1B:
+		rsp_type = _RSP1B_5B;
+		flag |= _CMD_FILTER_R1B;
+		break;
+	case MMC_RSP_NONE:
+		rsp_type = _RSP0;
+		flag |= _CMD_FILTER_R0;
+		break;
+	case MMC_RSP_R2:
+		rsp_type = _RSP2;
+		flag |= _CMD_FILTER_R2;
+		break;
+
+	case MMC_RSP_R4:
+		rsp_type = _RSP3_4;
+		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
+		break;
+
+	case MMC_RSP_R1:
+	case MMC_RSP_R1 & ~MMC_RSP_CRC:
+		rsp_type = _RSP1_5_6_7;
+		flag |= _CMD_FILTER_R1_R4_R5_R6_R7;
+		break;
+
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	host->int_filter = flag;
+	_sdhost_enable_int(host->ioaddr, flag);
+	pr_debug("sdhost %s cmd:%d rsp:%d intflag:0x%x\n"
+		 "if_multi:0x%x if_rd:0x%x auto_cmd:0x%x if_dma:0x%x\n",
+		 host->device_name, cmd->opcode, mmc_resp_type(cmd),
+		 flag, if_multi, if_rd, auto_cmd, if_dma);
+	_sdhost_set_trans_and_cmd(host->ioaddr, if_multi, if_rd, auto_cmd,
+		if_multi, if_dma, cmd->opcode, if_has_data, rsp_type);
+}
+
+void _cmd_irq(struct sdhost_host *host, u32 intmask)
+{
+	if (0 == intmask) {
+		WARN_ON(1);
+		return;
+	}
+
+	if (!host->cmd) {
+		pr_err("%s: got command interrupt 0x%08x even though no command operation was in process\n",
+		     host->device_name, (unsigned)intmask);
+		return;
+	}
+
+	if (_INT_ERR_CMD_TIMEOUT & intmask)
+		host->cmd->error = -ETIMEDOUT;
+	else if ((_INT_ERR_CMD_CRC | _INT_ERR_CMD_END |
+		  _INT_ERR_CMD_INDEX) & intmask)
+		host->cmd->error = -EILSEQ;
+}
+
+void _data_irq(struct sdhost_host *host, u32 intmask)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	if (data) {
+		/* current error is happened in data token */
+		if (_INT_ERR_DATA_TIMEOUT & intmask)
+			data->error = -ETIMEDOUT;
+		else
+			data->error = -EILSEQ;
+	} else {
+		/* current error is happend in response with busy */
+		if (_INT_ERR_DATA_TIMEOUT & intmask)
+			cmd->error = -ETIMEDOUT;
+		else
+			cmd->error = -EILSEQ;
+	}
+}
+
+void _trans_end_irq(struct sdhost_host *host, u32 intmask)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	if (data) {
+		dma_unmap_sg(mmc_dev(host->mmc),
+			     data->sg, data->sg_len,
+			     (data->flags & MMC_DATA_READ) ?
+			     DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		data->error = 0;
+		data->bytes_xfered = data->blksz * data->blocks;
+	} else {
+		/* R1B also can produce transferComplete interrupt */
+		cmd->error = 0;
+	}
+}
+
+int _err_irq_handle(struct sdhost_host *host, u32 intmask)
+{
+	int ret = 1;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+
+	/* some error happened in command */
+	_cmd_irq(host, intmask & _INT_FILTER_ERR);
+	if (_INT_FILTER_ERR_DATA & intmask)
+		/* some error happened in data token or command with R1B */
+		_data_irq(host, intmask);
+
+	if (_INT_ERR_ACMD & intmask)
+		/* Auto cmd12 and cmd23 error is belong to data token error */
+		data->error = -EILSEQ;
+
+	if (_INT_ERR_ADMA & intmask)
+		data->error = -EIO;
+
+	/* for debug */
+	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
+	dump_sdio_reg(host);
+	_sdhost_disable_all_int(host->ioaddr);
+
+	/* if current error happened in data token we send cmd12 to stop it*/
+	if ((mrq->cmd == cmd) && (mrq->stop)) {
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		_send_cmd(host, mrq->stop);
+	} else {
+		/* request finish with error, so reset it
+		 * and stop the request
+		 */
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		tasklet_schedule(&host->finish_tasklet);
+	}
+
+	return ret;
+}
+
+int _normal_irq_handle(struct sdhost_host *host, u32 intmask)
+{
+	int ret = 0;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+
+	/* delete irq that wanted in filter */
+	/* _sdhost_clear_int(host->ioaddr,
+	 *_INT_FILTER_NORMAL & intmask);
+	 */
+	host->int_filter &= ~(_INT_FILTER_NORMAL & intmask);
+	if (_INT_DMA_END & intmask)
+		_sdhost_writel(host->ioaddr,
+			_sdhost_readl(host->ioaddr,
+				SDHOST_32_SYS_ADDR),
+				SDHOST_32_SYS_ADDR);
+
+	if (_INT_CMD_END & intmask) {
+		cmd->error = 0;
+		__get_rsp(host);
+	}
+	if (_INT_TRAN_END & intmask)
+		_trans_end_irq(host, intmask);
+	if (!(_INT_FILTER_NORMAL & host->int_filter)) {
+		/* current cmd finished */
+		_sdhost_disable_all_int(host->ioaddr);
+		_sdhost_reset(host->ioaddr,
+			_RST_CMD | _RST_DATA);
+		if (mrq->sbc == cmd) {
+			_send_cmd(host, mrq->cmd);
+		} else if ((mrq->cmd == host->cmd)
+			&& (mrq->stop)) {
+				_send_cmd(host, mrq->stop);
+		} else {
+			/* finish with success and stop the
+			 * request
+			 */
+			tasklet_schedule(&host->finish_tasklet);
+			ret = 1;
+		}
+	}
+
+	return ret;
+}
+
+irqreturn_t _irq_func(int irq, void *param)
+{
+	u32 intmask;
+	struct sdhost_host *host = (struct sdhost_host *)param;
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data;
+
+	spin_lock(&host->lock);
+	/* maybe _timeout_func run in one core and _irq_func run in
+	 * another core, this will panic if access cmd->data
+	 */
+	if ((!mrq) || (!cmd)) {
+		spin_unlock(&host->lock);
+		return IRQ_NONE;
+	}
+	data = cmd->data;
+
+	intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
+	if (!intmask) {
+		spin_unlock(&host->lock);
+		return IRQ_NONE;
+	}
+	pr_debug("sdhost %s int 0x%x\n", host->device_name, intmask);
+
+	/* disable unused interrupt */
+	_sdhost_clear_int(host->ioaddr, intmask);
+	/* just care about the interrupt that we want */
+	intmask &= host->int_filter;
+
+	while (intmask) {
+		int ret;
+
+		if (_INT_FILTER_ERR & intmask) {
+			ret = _err_irq_handle(host, intmask);
+			if (ret)
+				goto out;
+		} else {
+			ret = _normal_irq_handle(host, intmask);
+			if (ret)
+				goto out;
+		}
+
+		intmask = _sdhost_readl(host->ioaddr, SDHOST_32_INT_STATUS);
+		_sdhost_clear_int(host->ioaddr, intmask);
+		intmask &= host->int_filter;
+	};
+
+out:
+	spin_unlock(&host->lock);
+	return IRQ_HANDLED;
+}
+
+void _tasklet_func(unsigned long param)
+{
+	struct sdhost_host *host = (struct sdhost_host *)param;
+	unsigned long flags;
+	struct mmc_request *mrq;
+
+	del_timer(&host->timer);
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (!host->mrq) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+	mrq = host->mrq;
+	host->mrq = NULL;
+	host->cmd = NULL;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	pr_debug("sdhost %s cmd %d data %d\n",
+		 host->device_name, mrq->cmd->error,
+		 ((!!mrq->cmd->data) ? mrq->cmd->data->error : 0));
+	mmc_request_done(host->mmc, mrq);
+	_runtime_put(host);
+}
+
+void _timeout_func(unsigned long data)
+{
+	struct sdhost_host *host = (struct sdhost_host *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (host->mrq) {
+		pr_info("sdhost %s Timeout waiting for hardware interrupt!\n",
+			host->device_name);
+		dump_sdio_reg(host);
+		if (host->cmd->data)
+			host->cmd->data->error = -ETIMEDOUT;
+		else if (host->cmd)
+			host->cmd->error = -ETIMEDOUT;
+		else
+			host->mrq->cmd->error = -ETIMEDOUT;
+
+		_sdhost_disable_all_int(host->ioaddr);
+		_sdhost_reset(host->ioaddr, _RST_CMD | _RST_DATA);
+		tasklet_schedule(&host->finish_tasklet);
+	}
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	host->mrq = mrq;
+	/* 1 find whether card is still in slot */
+	if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE)) {
+		if (!mmc_gpio_get_cd(host->mmc)) {
+			mrq->cmd->error = -ENOMEDIUM;
+			tasklet_schedule(&host->finish_tasklet);
+			mmiowb();
+			spin_unlock_irqrestore(&host->lock, flags);
+			return;
+		}
+		/* else asume sdcard is present */
+	}
+
+	/*
+	 * in our control we can not use auto cmd12 and auto cmd23 together
+	 * so in following program we use auto cmd23 prior to auto cmd12
+	 */
+	pr_debug("sdhost %s request %d %d %d\n",
+		 host->device_name, !!mrq->sbc, !!mrq->cmd, !!mrq->stop);
+	host->auto_cmd_mode = __ACMD_DIS;
+	if (!mrq->sbc && mrq->stop && SDHOST_FLAG_EN_ACMD12) {
+		host->auto_cmd_mode = __ACMD12;
+		mrq->data->stop = NULL;
+		mrq->stop = NULL;
+	}
+
+	/* 3 send cmd list */
+	if ((mrq->sbc) && SDHOST_FLAG_EN_ACMD23) {
+		host->auto_cmd_mode = __ACMD23;
+		_send_cmd(host, mrq->cmd);
+	} else if (mrq->sbc)
+		_send_cmd(host, mrq->sbc);
+	else
+		_send_cmd(host, mrq->cmd);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void signal_voltage_on_off(struct sdhost_host *host, uint32_t on_off)
+{
+	if (!host->mmc->supply.vqmmc) {
+		pr_err("%s(%s) there is no signal voltage!\n",
+		       __func__, host->device_name);
+		return;
+	}
+
+	if (on_off && (!host->sdio_1_8v_signal_enabled)) {
+		if (!regulator_enable(host->mmc->supply.vqmmc) &&
+			regulator_is_enabled(host->mmc->supply.vqmmc)) {
+			host->sdio_1_8v_signal_enabled = true;
+			pr_info("%s(%s) signal voltage enable success!\n",
+					__func__, host->device_name);
+		} else
+			pr_err("%s(%s) signal voltage enable fail!\n",
+				__func__, host->device_name);
+
+	} else if (!on_off && host->sdio_1_8v_signal_enabled) {
+		if (!regulator_disable(host->mmc->supply.vqmmc) &&
+			!regulator_is_enabled(host->mmc->supply.vqmmc)) {
+			host->sdio_1_8v_signal_enabled = false;
+			pr_info("%s(%s) signal voltage disable success!\n",
+				__func__, host->device_name);
+		} else
+			pr_err("%s(%s) signal voltage disable fail\n",
+				__func__, host->device_name);
+	}
+}
+
+/*
+ * 1 This votage is always poweron
+ * 2 initial votage is 2.7v~3.6v
+ * 3 It can be reconfig to 1.7v~1.95v
+ */
+int sdhost_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int err;
+
+	pr_debug("%s(%s) vqmmc:\n"
+		 "sdhost clock = %d-->%d\n"
+		 "sdhost vdd = %d-->%d\n"
+		 "sdhost bus_mode = %d-->%d\n"
+		 "sdhost chip_select = %d-->%d\n"
+		 "sdhost power_mode = %d-->%d\n"
+		 "sdhost bus_width = %d-->%d\n"
+		 "sdhost timing = %d-->%d\n"
+		 "sdhost signal_voltage = %d-->%d\n"
+		 "sdhost drv_type = %d-->%d\n",
+		 __func__, host->device_name,
+		 host->ios.clock, ios->clock,
+		 host->ios.vdd, ios->vdd,
+		 host->ios.bus_mode, ios->bus_mode,
+		 host->ios.chip_select, ios->chip_select,
+		 host->ios.power_mode, ios->power_mode,
+		 host->ios.bus_width, ios->bus_width,
+		 host->ios.timing, ios->timing,
+		 host->ios.signal_voltage, ios->signal_voltage,
+		 host->ios.drv_type, ios->drv_type);
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (!mmc->supply.vqmmc) {
+		/* there are no 1.8v signal votage. */
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		/* err = -EINVAL; */
+		err = 0;
+		pr_err("sdhost %s There is no signalling voltage\n",
+		       host->device_name);
+		return err;
+	}
+
+	/* I/O power supply */
+	if (ios->signal_voltage == host->ios.signal_voltage) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		return 0;
+	}
+
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    3000000, 3000000);
+		break;
+	case MMC_SIGNAL_VOLTAGE_180:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    1800000, 1800000);
+		break;
+	case MMC_SIGNAL_VOLTAGE_120:
+		err = regulator_set_voltage(mmc->supply.vqmmc,
+					    1100000, 1300000);
+		break;
+	default:
+		err = -EIO;
+		break;
+	}
+	if (likely(!err))
+		host->ios.signal_voltage = ios->signal_voltage;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+	WARN(err, "Switching to signalling voltage  failed\n");
+	return err;
+}
+
+void sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	pr_debug("%s(%s) ios:\n"
+		 "sdhost clock = %d-->%d\n"
+		 "sdhost vdd = %d-->%d\n"
+		 "sdhost bus_mode = %d-->%d\n"
+		 "sdhost chip_select = %d-->%d\n"
+		 "sdhost power_mode = %d-->%d\n"
+		 "sdhost bus_width = %d-->%d\n"
+		 "sdhost timing = %d-->%d\n"
+		 "sdhost signal_voltage = %d-->%d\n"
+		 "sdhost drv_type = %d-->%d\n",
+		 __func__, host->device_name,
+		 host->ios.clock, ios->clock,
+		 host->ios.vdd, ios->vdd,
+		 host->ios.bus_mode, ios->bus_mode,
+		 host->ios.chip_select, ios->chip_select,
+		 host->ios.power_mode, ios->power_mode,
+		 host->ios.bus_width, ios->bus_width,
+		 host->ios.timing, ios->timing,
+		 host->ios.signal_voltage, ios->signal_voltage,
+		 host->ios.drv_type, ios->drv_type);
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+	dump_sdio_reg(host);
+
+	if (0 == ios->clock) {
+		_sdhost_all_clk_off(host->ioaddr);
+		host->ios.clock = 0;
+	} else if (ios->clock != host->ios.clock) {
+		uint32_t div;
+
+		div = _sdhost_calc_div(host->base_clk, ios->clock);
+		_sdhost_sd_clk_off(host->ioaddr);
+		_sdhost_clk_set_and_on(host->ioaddr, div);
+		_sdhost_sd_clk_on(host->ioaddr);
+		host->ios.clock = ios->clock;
+		host->data_time_out_val =
+			_sdhost_calc_timeout(host->base_clk, div, 3);
+	}
+
+	if (ios->power_mode != host->ios.power_mode) {
+		switch (ios->power_mode) {
+		case MMC_POWER_OFF:
+			signal_voltage_on_off(host, 0);
+			if (mmc->supply.vmmc)
+				mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, 0);
+			_reset_ios(host);
+			host->ios.power_mode = ios->power_mode;
+			break;
+		case MMC_POWER_ON:
+		case MMC_POWER_UP:
+			if (mmc->supply.vmmc)
+				mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, ios->vdd);
+			signal_voltage_on_off(host, 1);
+			host->ios.power_mode = ios->power_mode;
+			host->ios.vdd = ios->vdd;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* flash power voltage select */
+	if (ios->vdd != host->ios.vdd) {
+		if (mmc->supply.vmmc) {
+			pr_info("sdhost %s 3.0 %d!\n",
+				host->device_name, ios->vdd);
+			mmc_regulator_set_ocr(host->mmc,
+					mmc->supply.vmmc, ios->vdd);
+		}
+		host->ios.vdd = ios->vdd;
+	}
+
+	if (ios->bus_width != host->ios.bus_width) {
+		_sdhost_set_buswidth(host->ioaddr, ios->bus_width);
+		host->ios.bus_width = ios->bus_width;
+	}
+
+	if (ios->timing != host->ios.timing) {
+		/* 1 first close SD clock */
+		_sdhost_sd_clk_off(host->ioaddr);
+		/* 2 set timing mode */
+		switch (ios->timing) {	/* timing specification used */
+		case MMC_TIMING_LEGACY:
+			/*basic clock mode */
+			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
+			break;
+		case MMC_TIMING_MMC_HS:
+		case MMC_TIMING_SD_HS:
+			_sdhost_set_uhs_mode(host->ioaddr, __TIMING_MODE_SDR12);
+			break;
+		case MMC_TIMING_UHS_SDR12:
+		case MMC_TIMING_UHS_SDR25:
+		case MMC_TIMING_UHS_SDR50:
+		case MMC_TIMING_UHS_SDR104:
+		case MMC_TIMING_UHS_DDR50:
+		case MMC_TIMING_MMC_HS200:
+			/* _sdhost_enable_hispd(host->ioaddr); */
+			_sdhost_set_uhs_mode(host->ioaddr, ios->timing -
+				MMC_TIMING_UHS_SDR12 + __TIMING_MODE_SDR12);
+			break;
+		default:
+			break;
+		}
+		/* 3 open SD clock */
+		_sdhost_sd_clk_on(host->ioaddr);
+		host->ios.timing = ios->timing;
+	}
+
+	mdelay(100);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+}
+
+int sdhost_get_ro(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+	/*read & write */
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+	return 0;
+}
+
+int sdhost_get_cd(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int gpio_cd;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (host->mmc->caps & MMC_CAP_NONREMOVABLE) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		_runtime_put(host);
+		return 1;
+	}
+
+	gpio_cd = mmc_gpio_get_cd(host->mmc);
+	if (IS_ERR_VALUE(gpio_cd))
+		gpio_cd = 1;
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+	return !!gpio_cd;
+}
+
+int sdhost_card_busy(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u32 present_state;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Check whether DAT[3:0] is 0000 */
+	present_state = _sdhost_readl(host->ioaddr, SDHOST_32_PRES_STATE);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+	return !(present_state & _DAT_LVL_MASK);
+}
+
+void sdhost_hw_reset(struct mmc_host *mmc)
+{
+	struct sdhost_host *host = mmc_priv(mmc);
+	unsigned long flags;
+
+	_runtime_get(host);
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* close LDO and open LDO again. */
+	signal_voltage_on_off(host, 0);
+	if (mmc->supply.vmmc)
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
+	mdelay(50);
+	if (mmc->supply.vmmc)
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc,
+				      host->ios.vdd);
+
+	signal_voltage_on_off(host, 1);
+	mdelay(50);
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+	_runtime_put(host);
+
+}
+
+const struct mmc_host_ops sdhost_ops = {
+	.request = sdhost_request,
+	.set_ios = sdhost_set_ios,
+	.get_ro = sdhost_get_ro,
+	.get_cd = sdhost_get_cd,
+
+	.start_signal_voltage_switch = sdhost_set_vqmmc,
+	.card_busy = sdhost_card_busy,
+	.hw_reset = sdhost_hw_reset,
+};
+
+void get_caps_info(struct sdhost_host *host, struct sdhost_caps_data *pdata)
+{
+	host->device_name = pdata->name;
+	host->ocr_avail = pdata->ocr_avail;
+	host->caps = pdata->caps;
+	host->caps2 = pdata->caps2;
+	host->pm_caps = pdata->pm_caps;
+	host->base_clk = pdata->base_clk;
+	host->signal_default_voltage = pdata->signal_default_voltage;
+}
+
+int get_basic_resource(struct platform_device *pdev, struct sdhost_host *host)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	uint32_t sdhost_delay[3];
+	struct sdhost_caps_data *pdata;
+	const struct of_device_id *of_id;
+	int ret;
+
+	of_id = of_match_node(sdhost_of_match, np);
+	if (!of_id) {
+		dev_err(&pdev->dev, "failed to match node\n");
+		return -ENODEV;
+	}
+	pdata = (struct sdhost_caps_data *)of_id->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	host->ioaddr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	host->mapbase = res->start;
+	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq < 0)
+		return host->irq;
+
+#if 0
+	host->clk = of_clk_get(np, 0);
+	if (IS_ERR_OR_NULL(host->clk))
+		return PTR_ERR(host->clk);
+
+	host->clk_parent = of_clk_get(np, 1);
+	if (IS_ERR_OR_NULL(host->clk_parent))
+		return PTR_ERR(host->clk_parent);
+#endif
+
+	get_caps_info(host, pdata);
+	host->detect_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+	if (!gpio_is_valid(host->detect_gpio))
+		host->detect_gpio = -1;
+
+	ret = of_property_read_u32_array(np, "sprd,delay", sdhost_delay, 3);
+	if (!ret) {
+		host->write_delay = sdhost_delay[0];
+		host->read_pos_delay = sdhost_delay[1];
+		host->read_neg_delay = sdhost_delay[2];
+	} else
+		dev_err(&pdev->dev, "can not read the property of sprd delay\n");
+
+	return 0;
+}
+
+int get_external_resource(struct sdhost_host *host)
+{
+	int err;
+	struct mmc_host *mmc = host->mmc;
+
+	host->dma_mask = DMA_BIT_MASK(64);
+	host->data_time_out_val = 0;
+
+	/* 1 LDO */
+	mmc_regulator_get_supply(mmc);
+	if (IS_ERR_OR_NULL(mmc->supply.vmmc)) {
+		pr_err("%s(%s): no vmmc regulator found\n",
+		       __func__, host->device_name);
+		mmc->supply.vmmc = NULL;
+	}
+	if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) {
+		pr_err("%s(%s): no vqmmc regulator found\n",
+		       __func__, host->device_name);
+		mmc->supply.vqmmc = NULL;
+	} else {
+		regulator_is_supported_voltage(mmc->supply.vqmmc,
+			host->signal_default_voltage,
+			host->signal_default_voltage);
+		regulator_set_voltage(mmc->supply.vqmmc,
+			host->signal_default_voltage,
+			host->signal_default_voltage);
+	}
+	host->mmc = mmc;
+
+#if 0
+	/* 2 clock */
+	clk_set_parent(host->clk, host->clk_parent);
+	clk_prepare_enable(host->clk);
+#endif
+	/* 3 reset sdio */
+	_reset_ios(host);
+	err = devm_request_irq(&host->pdev->dev, host->irq, _irq_func,
+			       IRQF_SHARED, mmc_hostname(host->mmc), host);
+	if (err)
+		return err;
+	tasklet_init(&host->finish_tasklet, _tasklet_func, (unsigned long)host);
+	/* 4 init timer */
+	setup_timer(&host->timer, _timeout_func, (unsigned long)host);
+
+	return 0;
+}
+
+int set_mmc_struct(struct sdhost_host *host, struct mmc_host *mmc)
+{
+	int ret = 0;
+
+	mmc = host->mmc;
+	mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+	mmc->ops = &sdhost_ops;
+	mmc->f_max = host->base_clk;
+	mmc->f_min = (unsigned int)(host->base_clk / __CLK_MAX_DIV);
+	mmc->max_busy_timeout = (1 << 27) / (host->base_clk / 1000);
+
+	mmc->caps = host->caps;
+	mmc->caps2 = host->caps2;
+	mmc->pm_caps = host->pm_caps;
+	mmc->pm_flags = host->pm_caps;
+	mmc->ocr_avail = host->ocr_avail;
+	mmc->ocr_avail_sdio = host->ocr_avail;
+	mmc->ocr_avail_sd = host->ocr_avail;
+	mmc->ocr_avail_mmc = host->ocr_avail;
+	mmc->max_current_330 = SDHOST_MAX_CUR;
+	mmc->max_current_300 = SDHOST_MAX_CUR;
+	mmc->max_current_180 = SDHOST_MAX_CUR;
+
+	mmc->max_segs = 1;
+	mmc->max_req_size = 524288;	/* 512k */
+	mmc->max_seg_size = mmc->max_req_size;
+
+	mmc->max_blk_size = 512;
+	mmc->max_blk_count = 65535;
+
+	ret = mmc_of_parse(mmc);
+	if (ret) {
+		mmc_free_host(mmc);
+		pr_info("parse sprd %s controller fail\n", host->device_name);
+		return ret;
+	}
+
+	pr_info("%s(%s): ocr avail = 0x%x\n"
+		"base clock = %u, pm_caps = 0x%x\n"
+		"caps: 0x%x, caps2: 0x%x\n",
+		__func__, host->device_name, mmc->ocr_avail,
+		host->base_clk, host->pm_caps, mmc->caps, mmc->caps2);
+
+	return ret;
+}
+
+int sdhost_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct sdhost_host *host;
+	int ret;
+
+	/* globe resource */
+	mmc = mmc_alloc_host(sizeof(struct sdhost_host), &pdev->dev);
+	if (!mmc) {
+		dev_err(&pdev->dev, "no memory for MMC host\n");
+		return -ENOMEM;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->pdev = pdev;
+	spin_lock_init(&host->lock);
+	platform_set_drvdata(pdev, host);
+
+	/* get sdio irq and sdio iomem */
+	ret = get_basic_resource(pdev, host);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to get basic resource: %d\n", ret);
+		return ret;
+	}
+
+	ret = get_external_resource(host);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to get external resource: %d\n", ret);
+		return ret;
+	}
+
+	ret = set_mmc_struct(host, mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to set mmc struct: %d\n", ret);
+		return ret;
+	}
+
+	pm_runtime_setting(pdev, host);
+
+	/*add host */
+	mmiowb();
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret);
+		mmc_free_host(mmc);
+	}
+
+	if (-1 != host->detect_gpio)
+		mmc_gpio_request_cd(mmc, host->detect_gpio, 0);
+
+	sdhost_add_debugfs(host);
+
+	dev_info(&pdev->dev,
+		 "Spreadtrum %s host controller at 0x%08lx irq %d\n",
+		 host->device_name, host->mapbase, host->irq);
+
+	return ret;
+}
+
+void sdhost_shutdown(struct platform_device *pdev)
+{
+}
+
+const struct dev_pm_ops sdhost_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(_pm_suspend, _pm_resume)
+	SET_RUNTIME_PM_OPS(_runtime_suspend,
+			       _runtime_resume, _runtime_idle)
+};
+
+MODULE_DEVICE_TABLE(of, sdhost_of_match);
+
+struct platform_driver sdhost_driver = {
+	.probe = sdhost_probe,
+	.shutdown = sdhost_shutdown,
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .pm = &sdhost_dev_pm_ops,
+		   .name = DRIVER_NAME,
+		   .of_match_table = of_match_ptr(sdhost_of_match),
+		   },
+};
+
+module_platform_driver(sdhost_driver);
+
+MODULE_DESCRIPTION("Spreadtrum sdio host controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sprd_sdhost.h b/drivers/mmc/host/sprd_sdhost.h
new file mode 100644
index 0000000..5778b6d
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost.h
@@ -0,0 +1,507 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef __SDHOST_H_
+#define __SDHOST_H_
+
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/scatterlist.h>
+#include <linux/types.h>
+
+/* Controller flag */
+#define SDHOST_FLAG_EN_ACMD12	1
+#define SDHOST_FLAG_EN_ACMD23	1
+#define SDHOST_FLAG_USE_ADMA	1
+
+/* Controller registers */
+static inline void _sdhost_writeb(void __iomem *ioadr, uint8_t val, int reg)
+{
+		writeb_relaxed(val, ioadr + reg);
+}
+static inline void _sdhost_writew(void __iomem *ioadr, uint16_t val, int reg)
+{
+		writew_relaxed(val, ioadr + reg);
+}
+static inline void _sdhost_writel(void __iomem *ioadr, uint32_t val, int reg)
+{
+		writel_relaxed(val, ioadr + reg);
+}
+static inline uint8_t _sdhost_readb(void __iomem *ioadr, int reg)
+{
+		return readb_relaxed(ioadr + reg);
+}
+static inline uint16_t _sdhost_readw(void __iomem *ioadr, int reg)
+{
+		return readw_relaxed(ioadr + reg);
+}
+static inline uint32_t _sdhost_readl(void __iomem *ioadr, int reg)
+{
+		return readl_relaxed(ioadr + reg);
+}
+#define SDHOST_32_SYS_ADDR	0x00
+/* used in cmd23 with ADMA in sdio 3.0 */
+#define SDHOST_32_BLK_CNT	0x00
+#define SDHOST_16_BLK_CNT	0x06
+
+static inline void _sdhost_set_16_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
+{
+	writew_relaxed((blk_cnt & 0xFFFF), ioadr + SDHOST_16_BLK_CNT);
+}
+
+static inline void _sdhost_set_32_blk_cnt(void __iomem *ioadr, uint32_t blk_cnt)
+{
+	writel_relaxed((blk_cnt & 0xFFFFFFFF), ioadr + SDHOST_32_BLK_CNT);
+}
+
+#define SDHOST_16_BLK_SIZE	0x04
+
+static inline void _sdhost_set_blk_size(void __iomem *ioadr, uint32_t blk_size)
+{
+	writew_relaxed((blk_size & 0xFFF) | 0x7000, ioadr + SDHOST_16_BLK_SIZE);
+}
+
+#define SDHOST_32_ARG			0x08
+#define SDHOST_16_TR_MODE		0x0C
+#define __ACMD_DIS	0x00
+#define __ACMD12	0x01
+#define __ACMD23	0x02
+static inline void _sdhost_set_trans_mode(
+				void __iomem *io_addr, int if_multi,
+				int if_read, uint16_t auto_cmd,
+				int if_blk_cnt, int if_dma)
+{
+	writew_relaxed(
+		(((if_multi ? 1 : 0) << 5) |
+		((if_read ? 1 : 0) << 4) |
+		(((u16)auto_cmd) << 2) |
+		((if_blk_cnt ? 1 : 0) << 1) |
+		((if_dma ? 1 : 0) << 0)) ,
+		io_addr + SDHOST_16_TR_MODE);
+}
+
+#define SDHOST_16_CMD			0x0E
+#define _CMD_INDEX_CHK			0x0010
+#define _CMD_CRC_CHK			0x0008
+#define _CMD_RSP_NONE			0x0000
+#define _CMD_RSP_136			0x0001
+#define _CMD_RSP_48				0x0002
+#define _CMD_RSP_48_BUSY		0x0003
+#define _RSP0			0
+#define _RSP1_5_6_7	\
+		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48)
+#define _RSP2 \
+		(_CMD_CRC_CHK | _CMD_RSP_136)
+#define _RSP3_4	\
+		_CMD_RSP_48
+#define _RSP1B_5B \
+		(_CMD_INDEX_CHK | _CMD_CRC_CHK | _CMD_RSP_48_BUSY)
+
+static inline void _sdhost_set_cmd(
+				void __iomem *ioadr, u32 cmd,
+				int if_has_data, u32 rsp_type)
+{
+	writew_relaxed(
+		((((u16)(cmd)) << 8) |
+		(((if_has_data) ? 1 : 0) << 5) |
+		((u16)(rsp_type))),
+		(ioadr) + SDHOST_16_CMD);
+}
+
+#define SDHOST_32_TR_MODE_AND_CMD		0x0C
+
+static inline void _sdhost_set_trans_and_cmd(
+				void __iomem *ioadr, int if_multi,
+				int if_read, uint16_t auto_cmd,
+				int if_blk_cnt, int if_dma, u32 cmd,
+				int if_has_data, u32 rsp_type)
+{
+	writel_relaxed(
+		((((if_multi) ? 1 : 0) << 5) |
+		(((if_read) ? 1 : 0) << 4) |
+		(((u32)(auto_cmd)) << 2) |
+		(((if_blk_cnt) ? 1 : 0) << 1) |
+		(((if_dma) ? 1 : 0) << 0) |
+		(((u32)(cmd)) << 24) |
+		(((if_has_data) ? 1 : 0) << 21) |
+		(((u32)(rsp_type)) << 16)) ,
+		ioadr + SDHOST_32_TR_MODE_AND_CMD);
+}
+
+#define SDHOST_32_RESP	0x10
+#define SDHOST_32_PRES_STATE	0x24
+#define  _DAT_LVL_MASK		0x00F00000
+#define SDHOST_8_HOST_CTRL	0x28
+#define __8_BIT_MOD		0x20
+#define __4_BIT_MOD		0x02
+#define __1_BIT_MOD	0x00
+#define __SDMA_MOD		0x00
+#define __32_ADMA_MOD	0x10
+#define __64_ADMA_MOD	0x18
+#define __HISPD_MOD		0x04
+
+static inline void _sdhost_set_buswidth(void __iomem *ioadr, uint32_t buswidth)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl &= (~(__8_BIT_MOD | __4_BIT_MOD | __1_BIT_MOD));
+	switch (buswidth) {
+	case MMC_BUS_WIDTH_1:
+		ctrl |= __1_BIT_MOD;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl |= __4_BIT_MOD;
+		break;
+	case MMC_BUS_WIDTH_8:
+		ctrl |= __8_BIT_MOD;
+		break;
+	default:
+		BUG_ON(1);
+		break;
+	}
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+static inline void _sdhost_set_dma(void __iomem *ioadr, u8 dmaMod)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl &= (~(__SDMA_MOD | __32_ADMA_MOD | __64_ADMA_MOD));
+	ctrl |= dmaMod;
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+static inline void _sdhost_enable_hispd(void __iomem *ioadr)
+{
+	u8 ctrl = 0;
+
+	ctrl = readb_relaxed(ioadr + SDHOST_8_HOST_CTRL);
+	ctrl |= __HISPD_MOD;
+	writeb_relaxed(ctrl, ioadr + SDHOST_8_HOST_CTRL);
+}
+
+/*#define SDHOST_8_PWR_CTRL     0x29    */ /* not used */
+#define SDHOST_8_BLK_GAP		0x2A	/* not used */
+#define SDHOST_8_WACKUP_CTRL	0x2B	/* not used */
+#define SDHOST_16_CLOCK_CTRL	0x2C
+#define __CLK_IN_EN		0x0001
+#define __CLK_IN_STABLE	0x0002
+#define __CLK_SD			0x0004
+#define __CLK_MAX_DIV		2046
+
+static inline void _sdhost_all_clk_off(void __iomem *ioadr)
+{
+	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline void _sdhost_sd_clk_off(void __iomem *ioadr)
+{
+	u16 ctrl = 0;
+
+	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl &= (~__CLK_SD);
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline void _sdhost_sd_clk_on(void __iomem *ioadr)
+{
+	u16 ctrl = 0;
+
+	ctrl = readw_relaxed(ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl |= __CLK_SD;
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+}
+
+static inline uint32_t _sdhost_calc_div(uint32_t base_clk, uint32_t clk)
+{
+	uint32_t N;
+
+	if (base_clk <= clk)
+		return 0;
+
+	N = (uint32_t) (base_clk / clk);
+	N = (N >> 1);
+	if (N)
+		N--;
+	if ((base_clk / ((N + 1) << 1)) > clk)
+		N++;
+	if (__CLK_MAX_DIV < N)
+		N = __CLK_MAX_DIV;
+	return N;
+}
+
+static inline void _sdhost_clk_set_and_on(void __iomem *ioadr, uint32_t div)
+{
+	u16 ctrl = 0;
+
+	writew_relaxed(0, ioadr + SDHOST_16_CLOCK_CTRL);
+	ctrl |= (uint16_t) (((div & 0x300) >> 2) | ((div & 0xFF) << 8));
+	ctrl |= __CLK_IN_EN;
+	writew_relaxed(ctrl, ioadr + SDHOST_16_CLOCK_CTRL);
+	while (!(__CLK_IN_STABLE & readw_relaxed(ioadr +
+						SDHOST_16_CLOCK_CTRL)))
+		;
+}
+
+#define SDHOST_8_TIMEOUT		0x2E
+#define __TIMEOUT_MAX_VAL		0xe
+static inline uint8_t _sdhost_calc_timeout(uint32_t base_clk,
+						uint32_t div, uint32_t seconds)
+{
+	uint32_t sd_clk = seconds * (base_clk / ((div + 1) << 1));
+	uint8_t i;
+
+	for (i = 0; i < 15; i++) {
+		if ((((uint32_t) 1) << (16 + i)) > sd_clk) {
+			if (0 != i)
+				i--;
+			break;
+		}
+	}
+	return i;
+}
+
+#define SDHOST_8_RESET			0x2F
+#define  _RST_ALL		0x01
+#define  _RST_CMD		0x02
+#define  _RST_DATA		0x04
+#define  _RST_EMMC		0x08	/*spredtrum define it byself */
+
+static inline void _sdhost_reset(void __iomem *ioadr, uint8_t mask)
+{
+	writeb_relaxed((_RST_EMMC | mask), ioadr + SDHOST_8_RESET);
+	while (_sdhost_readb(ioadr, SDHOST_8_RESET) & mask)
+		;
+}
+
+/* spredtrum define it byself */
+static inline void _sdhost_reset_emmc(void __iomem *ioadr)
+{
+	writeb_relaxed(0, ioadr + SDHOST_8_RESET);
+	mdelay(2);
+	writeb_relaxed(_RST_EMMC, ioadr + SDHOST_8_RESET);
+}
+
+#define SDHOST_32_INT_STATUS		0x30
+#define SDHOST_32_INT_STATUS_EN	0x34
+#define SDHOST_32_INT_SIGNAL_EN	0x38
+#define _INT_CMD_END		0x00000001
+#define _INT_TRAN_END		0x00000002
+#define _INT_DMA_END		0x00000008
+#define _INT_WR_RDY			0x00000010	/*not used */
+#define _INT_RD_RDY			0x00000020	/* not used */
+#define _INT_ERR				0x00008000
+#define _INT_ERR_CMD_TIMEOUT	0x00010000
+#define _INT_ERR_CMD_CRC		0x00020000
+#define _INT_ERR_CMD_END		0x00040000
+#define _INT_ERR_CMD_INDEX	0x00080000
+#define _INT_ERR_DATA_TIMEOUT	0x00100000
+#define _INT_ERR_DATA_CRC		0x00200000
+#define _INT_ERR_DATA_END		0x00400000
+#define _INT_ERR_CUR_LIMIT		0x00800000
+#define _INT_ERR_ACMD			0x01000000
+#define _INT_ERR_ADMA			0x02000000
+
+/* used in irq */
+#define _INT_FILTER_ERR_CMD \
+		(_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX)
+#define _INT_FILTER_ERR_DATA \
+		(_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
+		_INT_ERR_DATA_END)
+#define _INT_FILTER_ERR \
+		(_INT_ERR | _INT_FILTER_ERR_CMD | \
+		_INT_FILTER_ERR_DATA | _INT_ERR_ACMD | \
+		_INT_ERR_ADMA)
+#define _INT_FILTER_NORMAL \
+		(_INT_CMD_END | _INT_TRAN_END)
+
+/* used for setting */
+#define _DATA_FILTER_RD_SIGLE \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC | _INT_ERR_DATA_END)
+#define _DATA_FILTER_RD_MULTI \
+		(_INT_TRAN_END | _INT_DMA_END | _INT_ERR | \
+		_INT_ERR_DATA_TIMEOUT | _INT_ERR_DATA_CRC | \
+		_INT_ERR_DATA_END)
+#define _DATA_FILTER_WR_SIGLE \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC)
+#define _DATA_FILTER_WR_MULT \
+		(_INT_TRAN_END | _INT_DMA_END | \
+		_INT_ERR | _INT_ERR_DATA_TIMEOUT | \
+		_INT_ERR_DATA_CRC)
+#define _CMD_FILTER_R0 \
+		(_INT_CMD_END)
+#define _CMD_FILTER_R2 \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END)
+#define _CMD_FILTER_R3 \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_END)
+#define _CMD_FILTER_R1_R4_R5_R6_R7 \
+		(_INT_CMD_END | _INT_ERR | _INT_ERR_CMD_TIMEOUT | \
+		_INT_ERR_CMD_CRC | _INT_ERR_CMD_END | \
+		_INT_ERR_CMD_INDEX)
+#define _CMD_FILTER_R1B \
+		(_INT_CMD_END | _INT_ERR | \
+		_INT_ERR_CMD_TIMEOUT | _INT_ERR_CMD_CRC | \
+		_INT_ERR_CMD_END | _INT_ERR_CMD_INDEX | \
+		_INT_TRAN_END | _INT_ERR_DATA_TIMEOUT)
+
+
+static inline void _sdhost_disable_all_int(void __iomem *ioadr)
+{
+	writel_relaxed(0x0, ioadr + SDHOST_32_INT_SIGNAL_EN);
+	writel_relaxed(0x0, ioadr + SDHOST_32_INT_STATUS_EN);
+	writel_relaxed(0xFFFFFFFF, ioadr + SDHOST_32_INT_STATUS);
+}
+
+static inline void _sdhost_enable_int(void __iomem *ioadr, u32 mask)
+{
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS_EN);
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_SIGNAL_EN);
+}
+
+static inline void _sdhost_clear_int(void __iomem *ioadr, u32 mask)
+{
+	writel_relaxed(mask, ioadr + SDHOST_32_INT_STATUS);
+}
+
+#define SDHOST_16_ACMD_ERR		0x3C
+
+#define SDHOST_16_HOST_CTRL_2		0x3E
+#define __TIMING_MODE_SDR12		0x0000
+#define __TIMING_MODE_SDR25		0x0001
+#define __TIMING_MODE_SDR50		0x0002
+#define __TIMING_MODE_SDR104	0x0003
+#define __TIMING_MODE_DDR50	0x0004
+#define __TIMING_MODE_SDR200	0x0005
+
+static inline void _sdhost_set_uhs_mode(void __iomem *ioadr, uint16_t mode)
+{
+	writew_relaxed(mode, ioadr +  SDHOST_16_HOST_CTRL_2);
+}
+
+#define SDHOST_MAX_CUR	1020
+
+/* following register is defined by spreadtrum self.
+ * It is not standard register of SDIO.
+ */
+static inline void _sdhost_set_delay(
+				void __iomem *ioadr, uint32_t write_delay,
+				uint32_t read_pos_delay,
+				uint32_t read_neg_delay)
+{
+	writel_relaxed(write_delay, ioadr + 0x80);
+	writel_relaxed(read_pos_delay, ioadr + 0x84);
+	writel_relaxed(read_neg_delay, ioadr + 0x88);
+}
+
+#define SDHOST_32_CAPS	0x40
+#define  __TIMEOUT_CLK_MASK	0x0000003F
+#define  __TIMEOUT_CLK_SHIFT 0
+#define  __TIMEOUT_CLK_UNIT	0x00000080
+#define  __CLOCK_BASE_MASK	0x00003F00
+#define  __CLOCK_V3_BASE_MASK	0x0000FF00
+#define  __CLOCK_BASE_SHIFT	8
+#define  __MAX_BLOCK_MASK	0x00030000
+#define  __MAX_BLOCK_SHIFT  16
+#define  __CAN_DO_8BIT	0x00040000
+#define  __CAN_DO_ADMA2	0x00080000
+#define  __CAN_DO_ADMA1	0x00100000
+#define  __CAN_DO_HISPD	0x00200000
+#define  __CAN_DO_SDMA	0x00400000
+#define  __CAN_VDD_330	0x01000000
+#define  __CAN_VDD_300	0x02000000
+#define  __CAN_VDD_180	0x04000000
+#define  __CAN_64BIT	0x10000000
+
+#define SDHOST_32_CAPS2	0x44
+#define  __SUPPORT_SDR50	0x00000001
+#define  __SUPPORT_SDR104	0x00000002
+#define  __SUPPORT_DDR50	0x00000004
+#define  __DRIVER_TYPE_A	0x00000010
+#define  __DRIVER_TYPE_C	0x00000020
+#define  __DRIVER_TYPE_D	0x00000040
+#define  __RETUNING_TIMER_COUNT_MASK	0x00000F00
+#define  __RETUNING_TIMER_COUNT_SHIFT	8
+#define  __USE_SDR50_TUNING			0x00002000
+#define  __RETUNING_MODE_MASK		0x0000C000
+#define  __RETUNING_MODE_SHIFT		14
+#define  __CLOCK_MUL_MASK	0x00FF0000
+#define  __CLOCK_MUL_SHIFT	16
+
+
+/**********************************************************\
+ *
+ * Controller block structure
+ *
+\**********************************************************/
+struct sdhost_host {
+	/* --globe resource--- */
+	spinlock_t lock;
+	struct mmc_host *mmc;
+
+	/*--basic resource-- */
+	void __iomem *ioaddr;
+	int irq;
+	const char *device_name;
+	struct platform_device *pdev;
+	unsigned long mapbase;
+
+	int detect_gpio;
+	uint32_t ocr_avail;
+	char *clk_name;
+	char *clk_parent_name;
+	uint32_t base_clk;
+	uint32_t caps;
+	uint32_t caps2;
+	uint32_t pm_caps;
+	uint32_t write_delay;
+	uint32_t read_pos_delay;
+	uint32_t read_neg_delay;
+
+	/* --extern resource getted by base resource-- */
+	uint64_t dma_mask;
+	uint8_t data_time_out_val;
+	uint32_t signal_default_voltage;
+	bool sdio_1_8v_signal_enabled;
+	struct clk *clk;
+	struct clk *clk_parent;
+	struct tasklet_struct finish_tasklet;
+	struct timer_list timer;
+
+	/* --runtime param-- */
+	uint32_t int_filter;
+	struct mmc_ios ios;
+	struct mmc_request *mrq;	/* Current request */
+	struct mmc_command *cmd;	/* Current command */
+	uint16_t auto_cmd_mode;
+
+	/*--debugfs-- */
+	struct dentry *debugfs_root;
+};
+
+#endif /* __SDHOST_H_ */
diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.c b/drivers/mmc/host/sprd_sdhost_debugfs.c
new file mode 100644
index 0000000..bc04aea
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost_debugfs.c
@@ -0,0 +1,213 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost_debugfs.c - Secure Digital Host
+ * Controller Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+
+#include "sprd_sdhost_debugfs.h"
+
+#define ELEMENT(v) {v, #v}
+#define ELEMENT_NUM	26
+struct {
+	uint32_t bit;
+	char *caps_name;
+} caps_info[3][ELEMENT_NUM] = {
+	{
+		ELEMENT(MMC_CAP_4_BIT_DATA),
+		ELEMENT(MMC_CAP_MMC_HIGHSPEED),
+		ELEMENT(MMC_CAP_SD_HIGHSPEED),
+		ELEMENT(MMC_CAP_SDIO_IRQ),
+		ELEMENT(MMC_CAP_SPI),
+		ELEMENT(MMC_CAP_NEEDS_POLL),
+		ELEMENT(MMC_CAP_8_BIT_DATA),
+		ELEMENT(MMC_CAP_AGGRESSIVE_PM),
+		ELEMENT(MMC_CAP_NONREMOVABLE),
+		ELEMENT(MMC_CAP_WAIT_WHILE_BUSY),
+		ELEMENT(MMC_CAP_ERASE),
+		ELEMENT(MMC_CAP_1_8V_DDR),
+		ELEMENT(MMC_CAP_1_2V_DDR),
+		ELEMENT(MMC_CAP_POWER_OFF_CARD),
+		ELEMENT(MMC_CAP_BUS_WIDTH_TEST),
+		ELEMENT(MMC_CAP_UHS_SDR12),
+		ELEMENT(MMC_CAP_UHS_SDR25),
+		ELEMENT(MMC_CAP_UHS_SDR50),
+		ELEMENT(MMC_CAP_UHS_SDR104),
+		ELEMENT(MMC_CAP_UHS_DDR50),
+		ELEMENT(MMC_CAP_RUNTIME_RESUME),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_A),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_C),
+		ELEMENT(MMC_CAP_DRIVER_TYPE_D),
+		ELEMENT(MMC_CAP_CMD23),
+		ELEMENT(MMC_CAP_HW_RESET)
+	}, {
+		ELEMENT(MMC_CAP2_BOOTPART_NOACC),
+		ELEMENT(MMC_CAP2_FULL_PWR_CYCLE),
+		ELEMENT(MMC_CAP2_HS200_1_8V_SDR),
+		ELEMENT(MMC_CAP2_HS200_1_2V_SDR),
+		ELEMENT(MMC_CAP2_HS200),
+		ELEMENT(MMC_CAP2_HC_ERASE_SZ),
+		ELEMENT(MMC_CAP2_CD_ACTIVE_HIGH),
+		ELEMENT(MMC_CAP2_RO_ACTIVE_HIGH),
+		ELEMENT(MMC_CAP2_PACKED_RD),
+		ELEMENT(MMC_CAP2_PACKED_WR),
+		ELEMENT(MMC_CAP2_PACKED_CMD),
+		ELEMENT(MMC_CAP2_NO_PRESCAN_POWERUP),
+		ELEMENT(MMC_CAP2_HS400_1_8V),
+		ELEMENT(MMC_CAP2_HS400_1_2V),
+		ELEMENT(MMC_CAP2_HS400),
+		ELEMENT(MMC_CAP2_SDIO_IRQ_NOTHREAD)
+	}, {
+		ELEMENT(MMC_PM_KEEP_POWER),
+		ELEMENT(MMC_PM_WAKE_SDIO_IRQ),
+		ELEMENT(MMC_PM_IGNORE_PM_NOTIFY)
+	}
+
+};
+
+static int sdhost_param_show(struct seq_file *s, void *data)
+{
+	struct sdhost_host *host = s->private;
+	uint32_t i;
+
+	seq_printf(s, "\n"
+		   "ioaddr\t= 0x%p\n"
+		   "irq\t= %d\n"
+		   "device_name\t= %s\n"
+		   "detect_gpio\t= %d\n"
+		   "base_clk\t= %d\n"
+		   "write_delay\t= %d\n"
+		   "read_pos_delay\t= %d\n"
+		   "read_neg_delay\t= %d\n",
+		   host->ioaddr, host->irq, host->device_name,
+		   host->detect_gpio, host->base_clk,
+		   host->write_delay, host->read_pos_delay,
+		   host->read_neg_delay);
+	seq_printf(s, "OCR 0x%x\n", host->ocr_avail);
+
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[0][i].bit ==
+			(host->caps & caps_info[0][i].bit))
+					&& caps_info[0][i].bit)
+			seq_printf(s, "caps:%s\n", caps_info[0][i].caps_name);
+	}
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[1][i].bit ==
+			(host->caps2 & caps_info[1][i].bit))
+						&& caps_info[1][i].bit)
+			seq_printf(s, "caps2:%s\n", caps_info[1][i].caps_name);
+	}
+	for (i = 0; i < ELEMENT_NUM; i++) {
+		if ((caps_info[2][i].bit ==
+				(host->pm_caps & caps_info[2][i].bit))
+							&& caps_info[2][i].bit)
+			seq_printf(s, "pm_caps:%s\n",
+					caps_info[2][i].caps_name);
+	}
+
+	return 0;
+}
+
+static int sdhost_param_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sdhost_param_show, inode->i_private);
+}
+
+static const struct file_operations sdhost_param_fops = {
+	.open = sdhost_param_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+#define SDHOST_ATTR(PARAM_NAME)	\
+	static int sdhost_##PARAM_NAME##_get(void *data, u64 *val)\
+	{ \
+		struct sdhost_host *host = data;\
+		*val = (u64)host->PARAM_NAME;\
+		return 0;\
+	} \
+	static int sdhost_##PARAM_NAME##_set(void *data, u64 val)\
+	{ \
+		struct sdhost_host *host = data;\
+		if (0x7F >= (uint32_t)val) { \
+			host->PARAM_NAME = (uint32_t)val;\
+			_sdhost_set_delay(host->ioaddr, \
+							host->write_delay, \
+							host->read_pos_delay, \
+							host->read_neg_delay);\
+		} \
+		return 0;\
+	} \
+	DEFINE_SIMPLE_ATTRIBUTE(sdhost_##PARAM_NAME##_fops,\
+						sdhost_##PARAM_NAME##_get,\
+						sdhost_##PARAM_NAME##_set,\
+						"%llu\n")
+
+SDHOST_ATTR(write_delay);
+SDHOST_ATTR(read_pos_delay);
+SDHOST_ATTR(read_neg_delay);
+
+void sdhost_add_debugfs(struct sdhost_host *host)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(host->device_name, NULL);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		return;
+
+	host->debugfs_root = root;
+
+	if (!debugfs_create_file("basic_resource", S_IRUSR, root,
+				(void *)host, &sdhost_param_fops))
+		goto err;
+	if (!debugfs_create_file("write_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_write_delay_fops))
+		goto err;
+	if (!debugfs_create_file("read_pos_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_read_pos_delay_fops))
+		goto err;
+	if (!debugfs_create_file("read_neg_delay", S_IRUSR | S_IWUSR, root,
+				(void *)host, &sdhost_read_neg_delay_fops))
+		goto err;
+	return;
+
+err:
+	debugfs_remove_recursive(root);
+	host->debugfs_root = 0;
+}
+
+void dump_sdio_reg(struct sdhost_host *host)
+{
+	unsigned int i;
+
+	if (!host->mmc->card)
+		return;
+
+	pr_info("sdhost" ": =========== REGISTER DUMP (%s)========\n",
+		host->device_name);
+
+	for (i = 0; i < 0x09; i++) {
+		pr_info("sdhost" ": 0x%08x | 0x%08x | 0x%08x | 0x%08x\n\r",
+		       _sdhost_readl(host->ioaddr, 0 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 4 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 8 + (i << 4)),
+		       _sdhost_readl(host->ioaddr, 12 + (i << 4))
+		    );
+	}
+
+	pr_info("sdhost" ": ==================================\n");
+	mdelay(100);
+}
diff --git a/drivers/mmc/host/sprd_sdhost_debugfs.h b/drivers/mmc/host/sprd_sdhost_debugfs.h
new file mode 100644
index 0000000..0063e1b
--- /dev/null
+++ b/drivers/mmc/host/sprd_sdhost_debugfs.h
@@ -0,0 +1,27 @@
+/*
+ * linux/drivers/mmc/host/sprd_sdhost_debugfs.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2015 Spreadtrum corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#ifndef _SDHOST_DEBUGFS_H_
+#define _SDHOST_DEBUGFS_H_
+
+#include "sprd_sdhost.h"
+
+#ifdef CONFIG_DEBUG_FS
+void sdhost_add_debugfs(struct sdhost_host *host);
+void dump_sdio_reg(struct sdhost_host *host);
+#else
+static inline void sdhost_add_debugfs(struct sdhost_host *host) {}
+static inline void dump_sdio_reg(struct sdhost_host *host) {}
+#endif
+
+#endif
-- 
1.7.9.5

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Rob Herring]

On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
<chunyan.zhang@spreadtrum.com> wrote:
> From: Billows Wu <billows.wu@spreadtrum.com>
>
> The Spreadtrum MMC host driver is used to support EMMC, SD, and
> SDIO types of memory cards.
>
> Signed-off-by: Billows Wu <billows.wu@spreadtrum.com>
> Reviewed-by: Orson Zhai <orson.zhai@spreadtrum.com>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> ---
>  drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
>  drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
>  drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
>  drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
>  6 files changed, 2027 insertions(+)
>  create mode 100644 drivers/mmc/host/sprd_sdhost.c
>  create mode 100644 drivers/mmc/host/sprd_sdhost.h
>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h
>
> diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
> new file mode 100644
> index 0000000..e7a66e8
> --- /dev/null
> +++ b/drivers/mmc/host/sprd_sdhost.c
> @@ -0,0 +1,1270 @@
> +/*
> + * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
> + * Interface driver
> + *
> + * Copyright (C) 2015 Spreadtrum corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/highmem.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/scatterlist.h>
> +
> +#include "sprd_sdhost.h"
> +#include "sprd_sdhost_debugfs.h"
> +
> +#define DRIVER_NAME "sdhost"
> +#define SDHOST_CAPS \
> +               (MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
> +               MMC_CAP_ERASE |  MMC_CAP_UHS_SDR50 | \
> +               MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
> +
> +struct sdhost_caps_data {
> +       char *name;
> +       uint32_t ocr_avail;
> +       uint32_t caps;
> +       uint32_t caps2;
> +       uint32_t pm_caps;
> +       /* TODO: we will obtain these values from regulator and clock
> +        * phandles after LDO and clock function is OK
> +        */

You can do fixed clocks and regulators in DT until you have a driver in place.

> +       uint32_t base_clk;
> +       uint32_t signal_default_voltage;
> +};
> +
> +struct sdhost_caps_data sd_caps_info = {
> +       .name = "sd",
> +       .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
> +       .caps = SDHOST_CAPS,
> +       .caps2 = MMC_CAP2_HC_ERASE_SZ,
> +       .pm_caps = MMC_PM_WAKE_SDIO_IRQ,
> +       .base_clk = 192000000,
> +       .signal_default_voltage = 3000000,
> +};
> +
> +struct sdhost_caps_data wifi_caps_info = {
> +       .name = "wifi",
> +       .ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
> +           MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
> +       .caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,

Is powering off a card a capability of the SD host controller or just
the regulator control you have?

> +       .pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
> +       .base_clk = 76000000,
> +};
> +
> +struct sdhost_caps_data emmc_caps_info = {
> +       .name = "emmc",
> +       .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
> +       .caps = SDHOST_CAPS |
> +           MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
> +           MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
> +       .caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
> +       .pm_caps = MMC_PM_WAKE_SDIO_IRQ,
> +       .base_clk = 192000000,
> +       .signal_default_voltage = 1800000,
> +};
> +
> +const struct of_device_id sdhost_of_match[] = {
> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},

What these are connected to is irrelevant to the driver and compatible
string. All these differences belong in the DT unless the IP blocks
are really different.

Rob

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Orson Zhai]

Hi Rob,

Thanks for your quick reply.
I have one question to your last comment.

On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
> <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org> wrote:
>> From: Billows Wu <billows.wu-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
>>
>> The Spreadtrum MMC host driver is used to support EMMC, SD, and
>> SDIO types of memory cards.
>>
>> Signed-off-by: Billows Wu <billows.wu-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
>> Reviewed-by: Orson Zhai <orson.zhai-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
>> Signed-off-by: Chunyan Zhang <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
>> ---
>>  drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
>>  drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
>>  drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
>>  drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
>>  6 files changed, 2027 insertions(+)
>>  create mode 100644 drivers/mmc/host/sprd_sdhost.c
>>  create mode 100644 drivers/mmc/host/sprd_sdhost.h
>>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
>>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h
>>
>> diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
>> new file mode 100644
>> index 0000000..e7a66e8
>> --- /dev/null
>> +++ b/drivers/mmc/host/sprd_sdhost.c
>> @@ -0,0 +1,1270 @@
>> +/*
>> + * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
>> + * Interface driver
>> + *
>> + * Copyright (C) 2015 Spreadtrum corporation.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or (at
>> + * your option) any later version.
>> + *
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/highmem.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/slab.h>
>> +#include <linux/scatterlist.h>
>> +
>> +#include "sprd_sdhost.h"
>> +#include "sprd_sdhost_debugfs.h"
>> +
>> +#define DRIVER_NAME "sdhost"
>> +#define SDHOST_CAPS \
>> +               (MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
>> +               MMC_CAP_ERASE |  MMC_CAP_UHS_SDR50 | \
>> +               MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
>> +
>> +struct sdhost_caps_data {
>> +       char *name;
>> +       uint32_t ocr_avail;
>> +       uint32_t caps;
>> +       uint32_t caps2;
>> +       uint32_t pm_caps;
>> +       /* TODO: we will obtain these values from regulator and clock
>> +        * phandles after LDO and clock function is OK
>> +        */
>
> You can do fixed clocks and regulators in DT until you have a driver in place.
>
>> +       uint32_t base_clk;
>> +       uint32_t signal_default_voltage;
>> +};
>> +
>> +struct sdhost_caps_data sd_caps_info = {
>> +       .name = "sd",
>> +       .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
>> +       .caps = SDHOST_CAPS,
>> +       .caps2 = MMC_CAP2_HC_ERASE_SZ,
>> +       .pm_caps = MMC_PM_WAKE_SDIO_IRQ,
>> +       .base_clk = 192000000,
>> +       .signal_default_voltage = 3000000,
>> +};
>> +
>> +struct sdhost_caps_data wifi_caps_info = {
>> +       .name = "wifi",
>> +       .ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
>> +           MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
>> +       .caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,
>
> Is powering off a card a capability of the SD host controller or just
> the regulator control you have?
>
>> +       .pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
>> +       .base_clk = 76000000,
>> +};
>> +
>> +struct sdhost_caps_data emmc_caps_info = {
>> +       .name = "emmc",
>> +       .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
>> +       .caps = SDHOST_CAPS |
>> +           MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
>> +           MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
>> +       .caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
>> +       .pm_caps = MMC_PM_WAKE_SDIO_IRQ,
>> +       .base_clk = 192000000,
>> +       .signal_default_voltage = 1800000,
>> +};
>> +
>> +const struct of_device_id sdhost_of_match[] = {
>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>
> What these are connected to is irrelevant to the driver and compatible
> string. All these differences belong in the DT unless the IP blocks
> are really different.

It's my idea to let Billows do like this.
I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
And they may write one of their combo configuration like this:

 43                         ssp1: ssp@80012000 {
 44                                 compatible = "fsl,imx28-mmc";
 45                                 bus-width = <8>;
 46                                 wp-gpios = <&gpio0 28 0>;
 47                         };
 48
 49                         ssp2: ssp@80014000 {
 50                                 #address-cells = <1>;
 51                                 #size-cells = <0>;
 52                                 compatible = "fsl,imx28-spi";
 53                                 pinctrl-names = "default";
 54                                 pinctrl-0 = <&spi2_pins_a>;
 55                                 status = "okay";
 56
 57                                 flash: m25p80@0 {
 58                                         #address-cells = <1>;
 59                                         #size-cells = <1>;
 60                                         compatible = "sst,sst25vf016b";
 61                                         spi-max-frequency = <40000000>;
 62                                         reg = <0>;
 63                                 };
 64                         };

Billows tell me they also have 3 roles in their sd host controller
corresponding to 3 kinds of different operation.
He used to create "sprd,name" property for this. Is it a good way or
anything else better?

Thanks,
Orson

>
> Rob
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Orson Zhai]

Hi Rob,

Thanks for your quick reply.
I have one question to your last comment.

On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2@gmail.com> wrote:
> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
> <chunyan.zhang@spreadtrum.com> wrote:
>> From: Billows Wu <billows.wu@spreadtrum.com>
>>
>> The Spreadtrum MMC host driver is used to support EMMC, SD, and
>> SDIO types of memory cards.
>>
>> Signed-off-by: Billows Wu <billows.wu@spreadtrum.com>
>> Reviewed-by: Orson Zhai <orson.zhai@spreadtrum.com>
>> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
>> ---
>>  drivers/mmc/host/sprd_sdhost.c         | 1270 ++++++++++++++++++++++++++++++++
>>  drivers/mmc/host/sprd_sdhost.h         |  507 +++++++++++++
>>  drivers/mmc/host/sprd_sdhost_debugfs.c |  213 ++++++
>>  drivers/mmc/host/sprd_sdhost_debugfs.h |   27 +
>>  6 files changed, 2027 insertions(+)
>>  create mode 100644 drivers/mmc/host/sprd_sdhost.c
>>  create mode 100644 drivers/mmc/host/sprd_sdhost.h
>>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.c
>>  create mode 100644 drivers/mmc/host/sprd_sdhost_debugfs.h
>>
>> diff --git a/drivers/mmc/host/sprd_sdhost.c b/drivers/mmc/host/sprd_sdhost.c
>> new file mode 100644
>> index 0000000..e7a66e8
>> --- /dev/null
>> +++ b/drivers/mmc/host/sprd_sdhost.c
>> @@ -0,0 +1,1270 @@
>> +/*
>> + * linux/drivers/mmc/host/sprd_sdhost.c - Secure Digital Host Controller
>> + * Interface driver
>> + *
>> + * Copyright (C) 2015 Spreadtrum corporation.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or (at
>> + * your option) any later version.
>> + *
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/highmem.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/slab.h>
>> +#include <linux/scatterlist.h>
>> +
>> +#include "sprd_sdhost.h"
>> +#include "sprd_sdhost_debugfs.h"
>> +
>> +#define DRIVER_NAME "sdhost"
>> +#define SDHOST_CAPS \
>> +               (MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | \
>> +               MMC_CAP_ERASE |  MMC_CAP_UHS_SDR50 | \
>> +               MMC_CAP_CMD23 | MMC_CAP_HW_RESET)
>> +
>> +struct sdhost_caps_data {
>> +       char *name;
>> +       uint32_t ocr_avail;
>> +       uint32_t caps;
>> +       uint32_t caps2;
>> +       uint32_t pm_caps;
>> +       /* TODO: we will obtain these values from regulator and clock
>> +        * phandles after LDO and clock function is OK
>> +        */
>
> You can do fixed clocks and regulators in DT until you have a driver in place.
>
>> +       uint32_t base_clk;
>> +       uint32_t signal_default_voltage;
>> +};
>> +
>> +struct sdhost_caps_data sd_caps_info = {
>> +       .name = "sd",
>> +       .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
>> +       .caps = SDHOST_CAPS,
>> +       .caps2 = MMC_CAP2_HC_ERASE_SZ,
>> +       .pm_caps = MMC_PM_WAKE_SDIO_IRQ,
>> +       .base_clk = 192000000,
>> +       .signal_default_voltage = 3000000,
>> +};
>> +
>> +struct sdhost_caps_data wifi_caps_info = {
>> +       .name = "wifi",
>> +       .ocr_avail = MMC_VDD_165_195 | MMC_VDD_29_30 |
>> +           MMC_VDD_30_31 | MMC_VDD_32_33 | MMC_VDD_33_34,
>> +       .caps = SDHOST_CAPS | MMC_CAP_POWER_OFF_CARD | MMC_CAP_UHS_SDR12,
>
> Is powering off a card a capability of the SD host controller or just
> the regulator control you have?
>
>> +       .pm_caps = MMC_PM_KEEP_POWER | MMC_PM_IGNORE_PM_NOTIFY,
>> +       .base_clk = 76000000,
>> +};
>> +
>> +struct sdhost_caps_data emmc_caps_info = {
>> +       .name = "emmc",
>> +       .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31,
>> +       .caps = SDHOST_CAPS |
>> +           MMC_CAP_8_BIT_DATA | MMC_CAP_UHS_SDR12 |
>> +           MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 | MMC_CAP_MMC_HIGHSPEED,
>> +       .caps2 = MMC_CAP2_FULL_PWR_CYCLE | MMC_CAP2_HC_ERASE_SZ,
>> +       .pm_caps = MMC_PM_WAKE_SDIO_IRQ,
>> +       .base_clk = 192000000,
>> +       .signal_default_voltage = 1800000,
>> +};
>> +
>> +const struct of_device_id sdhost_of_match[] = {
>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>
> What these are connected to is irrelevant to the driver and compatible
> string. All these differences belong in the DT unless the IP blocks
> are really different.

It's my idea to let Billows do like this.
I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
And they may write one of their combo configuration like this:

 43                         ssp1: ssp@80012000 {
 44                                 compatible = "fsl,imx28-mmc";
 45                                 bus-width = <8>;
 46                                 wp-gpios = <&gpio0 28 0>;
 47                         };
 48
 49                         ssp2: ssp@80014000 {
 50                                 #address-cells = <1>;
 51                                 #size-cells = <0>;
 52                                 compatible = "fsl,imx28-spi";
 53                                 pinctrl-names = "default";
 54                                 pinctrl-0 = <&spi2_pins_a>;
 55                                 status = "okay";
 56
 57                                 flash: m25p80@0 {
 58                                         #address-cells = <1>;
 59                                         #size-cells = <1>;
 60                                         compatible = "sst,sst25vf016b";
 61                                         spi-max-frequency = <40000000>;
 62                                         reg = <0>;
 63                                 };
 64                         };

Billows tell me they also have 3 roles in their sd host controller
corresponding to 3 kinds of different operation.
He used to create "sprd,name" property for this. Is it a good way or
anything else better?

Thanks,
Orson

>
> Rob
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Rob Herring]

On Thu, Jul 2, 2015 at 4:26 AM, Orson Zhai <orsonzhai@gmail.com> wrote:
> Hi Rob,
>
> Thanks for your quick reply.
> I have one question to your last comment.
>
> On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2@gmail.com> wrote:
>> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
>> <chunyan.zhang@spreadtrum.com> wrote:
>>> From: Billows Wu <billows.wu@spreadtrum.com>

[...]

>>> +const struct of_device_id sdhost_of_match[] = {
>>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>>
>> What these are connected to is irrelevant to the driver and compatible
>> string. All these differences belong in the DT unless the IP blocks
>> are really different.
>
> It's my idea to let Billows do like this.
> I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
> Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
> And they may write one of their combo configuration like this:

That is a bit different as the host controller is operating in
completely different modes. In your case, the host controller is the
same and functions the same way, but just has different cards
attached.

>
>  43                         ssp1: ssp@80012000 {
>  44                                 compatible = "fsl,imx28-mmc";
>  45                                 bus-width = <8>;
>  46                                 wp-gpios = <&gpio0 28 0>;
>  47                         };
>  48
>  49                         ssp2: ssp@80014000 {
>  50                                 #address-cells = <1>;
>  51                                 #size-cells = <0>;
>  52                                 compatible = "fsl,imx28-spi";
>  53                                 pinctrl-names = "default";
>  54                                 pinctrl-0 = <&spi2_pins_a>;
>  55                                 status = "okay";
>  56
>  57                                 flash: m25p80@0 {
>  58                                         #address-cells = <1>;
>  59                                         #size-cells = <1>;
>  60                                         compatible = "sst,sst25vf016b";
>  61                                         spi-max-frequency = <40000000>;
>  62                                         reg = <0>;
>  63                                 };
>  64                         };
>
> Billows tell me they also have 3 roles in their sd host controller
> corresponding to 3 kinds of different operation.
> He used to create "sprd,name" property for this. Is it a good way or
> anything else better?

Why do you need to know? You can define parameters which can't be
probed such as bus width, voltage, and clock freq. in DT for each
host. The MMC subsys core will figure out the type of device attached.

Rob

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Orson Zhai]

On Thu, Jul 2, 2015 at 11:47 PM, Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> On Thu, Jul 2, 2015 at 4:26 AM, Orson Zhai <orsonzhai-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> Hi Rob,
>>
>> Thanks for your quick reply.
>> I have one question to your last comment.
>>
>> On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>>> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
>>> <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org> wrote:
>>>> From: Billows Wu <billows.wu-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
>
> [...]
>
>>>> +const struct of_device_id sdhost_of_match[] = {
>>>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>>>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>>>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>>>
>>> What these are connected to is irrelevant to the driver and compatible
>>> string. All these differences belong in the DT unless the IP blocks
>>> are really different.
>>
>> It's my idea to let Billows do like this.
>> I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
>> Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
>> And they may write one of their combo configuration like this:
>
> That is a bit different as the host controller is operating in
> completely different modes. In your case, the host controller is the
> same and functions the same way, but just has different cards
> attached.
>
>>
>>  43                         ssp1: ssp@80012000 {
>>  44                                 compatible = "fsl,imx28-mmc";
>>  45                                 bus-width = <8>;
>>  46                                 wp-gpios = <&gpio0 28 0>;
>>  47                         };
>>  48
>>  49                         ssp2: ssp@80014000 {
>>  50                                 #address-cells = <1>;
>>  51                                 #size-cells = <0>;
>>  52                                 compatible = "fsl,imx28-spi";
>>  53                                 pinctrl-names = "default";
>>  54                                 pinctrl-0 = <&spi2_pins_a>;
>>  55                                 status = "okay";
>>  56
>>  57                                 flash: m25p80@0 {
>>  58                                         #address-cells = <1>;
>>  59                                         #size-cells = <1>;
>>  60                                         compatible = "sst,sst25vf016b";
>>  61                                         spi-max-frequency = <40000000>;
>>  62                                         reg = <0>;
>>  63                                 };
>>  64                         };
>>
>> Billows tell me they also have 3 roles in their sd host controller
>> corresponding to 3 kinds of different operation.
>> He used to create "sprd,name" property for this. Is it a good way or
>> anything else better?
>
> Why do you need to know? You can define parameters which can't be
> probed such as bus width, voltage, and clock freq. in DT for each
> host. The MMC subsys core will figure out the type of device attached.

I think you're right.
Thanks!
-orson

>
> Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Orson Zhai]

On Thu, Jul 2, 2015 at 11:47 PM, Rob Herring <robherring2@gmail.com> wrote:
> On Thu, Jul 2, 2015 at 4:26 AM, Orson Zhai <orsonzhai@gmail.com> wrote:
>> Hi Rob,
>>
>> Thanks for your quick reply.
>> I have one question to your last comment.
>>
>> On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2@gmail.com> wrote:
>>> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
>>> <chunyan.zhang@spreadtrum.com> wrote:
>>>> From: Billows Wu <billows.wu@spreadtrum.com>
>
> [...]
>
>>>> +const struct of_device_id sdhost_of_match[] = {
>>>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>>>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>>>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>>>
>>> What these are connected to is irrelevant to the driver and compatible
>>> string. All these differences belong in the DT unless the IP blocks
>>> are really different.
>>
>> It's my idea to let Billows do like this.
>> I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
>> Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
>> And they may write one of their combo configuration like this:
>
> That is a bit different as the host controller is operating in
> completely different modes. In your case, the host controller is the
> same and functions the same way, but just has different cards
> attached.
>
>>
>>  43                         ssp1: ssp@80012000 {
>>  44                                 compatible = "fsl,imx28-mmc";
>>  45                                 bus-width = <8>;
>>  46                                 wp-gpios = <&gpio0 28 0>;
>>  47                         };
>>  48
>>  49                         ssp2: ssp@80014000 {
>>  50                                 #address-cells = <1>;
>>  51                                 #size-cells = <0>;
>>  52                                 compatible = "fsl,imx28-spi";
>>  53                                 pinctrl-names = "default";
>>  54                                 pinctrl-0 = <&spi2_pins_a>;
>>  55                                 status = "okay";
>>  56
>>  57                                 flash: m25p80@0 {
>>  58                                         #address-cells = <1>;
>>  59                                         #size-cells = <1>;
>>  60                                         compatible = "sst,sst25vf016b";
>>  61                                         spi-max-frequency = <40000000>;
>>  62                                         reg = <0>;
>>  63                                 };
>>  64                         };
>>
>> Billows tell me they also have 3 roles in their sd host controller
>> corresponding to 3 kinds of different operation.
>> He used to create "sprd,name" property for this. Is it a good way or
>> anything else better?
>
> Why do you need to know? You can define parameters which can't be
> probed such as bus width, voltage, and clock freq. in DT for each
> host. The MMC subsys core will figure out the type of device attached.

I think you're right.
Thanks!
-orson

>
> Rob

RE: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Billows Wu (武洪涛)]

Hi Rob,

Thanks for your reply.
The MMC subsys core can figure out the type of the device attached. But it happaped after MMC probe function run over. 
If we want to distinguish MMC，SD or Wi-Fi in controller's probe function, we may by controller's register physical address, for example  20600000.sdio，2.400000.sdio or 20300000.sdio.   So we must know MMC controller's physical address is 0x20600000 and SD controller's physical address is 0x20300000. This reduces the code readability. 
If you have a good opinion how to distinguish MMC form SD or SDIO device in host controller probe function not by physical address, please tell us.

Thanks!                    
--billows
___________________________________
From: Orson Zhai <orsonzhai@gmail.com>
Sent: Friday, July 3, 2015 10:50 AM
To: Rob Herring
Cc: Chunyan Zhang (张春艳); chris@printf.net; Ulf Hansson; Lee Jones; Shawn Guo; Grant Likely; Rob Herring; Arnd Bergmann; Billows Wu (武洪涛); Wei Qiao (乔伟); Baolin Wang (王宝林); Ning Yang (杨宁); Orson Zhai (翟京); Jason Wu (吴霁爽); linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
Subject: Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

On Thu, Jul 2, 2015 at 11:47 PM, Rob Herring <robherring2@gmail.com> wrote:
> On Thu, Jul 2, 2015 at 4:26 AM, Orson Zhai <orsonzhai@gmail.com> wrote:
>> Hi Rob,
>>
>> Thanks for your quick reply.
>> I have one question to your last comment.
>>
>> On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2@gmail.com> wrote:
>>> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
>>> <chunyan.zhang@spreadtrum.com> wrote:
>>>> From: Billows Wu <billows.wu@spreadtrum.com>
>
> [...]
>
>>>> +const struct of_device_id sdhost_of_match[] = {
>>>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>>>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>>>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>>>
>>> What these are connected to is irrelevant to the driver and compatible
>>> string. All these differences belong in the DT unless the IP blocks
>>> are really different.
>>
>> It's my idea to let Billows do like this.
>> I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
>> Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
>> And they may write one of their combo configuration like this:
>
> That is a bit different as the host controller is operating in
> completely different modes. In your case, the host controller is the
> same and functions the same way, but just has different cards
> attached.
>
>>
>>  43                         ssp1: ssp@80012000 {
>>  44                                 compatible = "fsl,imx28-mmc";
>>  45                                 bus-width = <8>;
>>  46                                 wp-gpios = <&gpio0 28 0>;
>>  47                         };
>>  48
>>  49                         ssp2: ssp@80014000 {
>>  50                                 #address-cells = <1>;
>>  51                                 #size-cells = <0>;
>>  52                                 compatible = "fsl,imx28-spi";
>>  53                                 pinctrl-names = "default";
>>  54                                 pinctrl-0 = <&spi2_pins_a>;
>>  55                                 status = "okay";
>>  56
>>  57                                 flash: m25p80@0 {
>>  58                                         #address-cells = <1>;
>>  59                                         #size-cells = <1>;
>>  60                                         compatible = "sst,sst25vf016b";
>>  61                                         spi-max-frequency = <40000000>;
>>  62                                         reg = <0>;
>>  63                                 };
>>  64                         };
>>
>> Billows tell me they also have 3 roles in their sd host controller
>> corresponding to 3 kinds of different operation.
>> He used to create "sprd,name" property for this. Is it a good way or
>> anything else better?
>
> Why do you need to know? You can define parameters which can't be
> probed such as bus width, voltage, and clock freq. in DT for each
> host. The MMC subsys core will figure out the type of device attached.

I think you're right.
Thanks!
-orson

>
> Rob

RE: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Billows Wu (武洪涛)]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 4456 bytes --]

Hi Rob,

Thanks for your reply.
The MMC subsys core can figure out the type of the device attached. But it happaped after MMC probe function run over. 
If we want to distinguish MMC£¬SD or Wi-Fi in controller's probe function, we may by controller's register physical address, for example  20600000.sdio£¬2.400000.sdio or 20300000.sdio.   So we must know MMC controller's physical address is 0x20600000 and SD controller's physical address is 0x20300000. This reduces the code readability. 
If you have a good opinion how to distinguish MMC form SD or SDIO device in host controller probe function not by physical address, please tell us.

Thanks!                    
--billows
___________________________________
From: Orson Zhai <orsonzhai@gmail.com>
Sent: Friday, July 3, 2015 10:50 AM
To: Rob Herring
Cc: Chunyan Zhang (ÕÅ´ºÑÞ); chris@printf.net; Ulf Hansson; Lee Jones; Shawn Guo; Grant Likely; Rob Herring; Arnd Bergmann; Billows Wu (ÎäºéÌÎ); Wei Qiao (ÇÇΰ); Baolin Wang (Íõ±¦ÁÖ); Ning Yang (ÑîÄþ); Orson Zhai (µÔ¾©); Jason Wu (Îâö«Ë¬); linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
Subject: Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

On Thu, Jul 2, 2015 at 11:47 PM, Rob Herring <robherring2@gmail.com> wrote:
> On Thu, Jul 2, 2015 at 4:26 AM, Orson Zhai <orsonzhai@gmail.com> wrote:
>> Hi Rob,
>>
>> Thanks for your quick reply.
>> I have one question to your last comment.
>>
>> On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2@gmail.com> wrote:
>>> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
>>> <chunyan.zhang@spreadtrum.com> wrote:
>>>> From: Billows Wu <billows.wu@spreadtrum.com>
>
> [...]
>
>>>> +const struct of_device_id sdhost_of_match[] = {
>>>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>>>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>>>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>>>
>>> What these are connected to is irrelevant to the driver and compatible
>>> string. All these differences belong in the DT unless the IP blocks
>>> are really different.
>>
>> It's my idea to let Billows do like this.
>> I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
>> Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
>> And they may write one of their combo configuration like this:
>
> That is a bit different as the host controller is operating in
> completely different modes. In your case, the host controller is the
> same and functions the same way, but just has different cards
> attached.
>
>>
>>  43                         ssp1: ssp@80012000 {
>>  44                                 compatible = "fsl,imx28-mmc";
>>  45                                 bus-width = <8>;
>>  46                                 wp-gpios = <&gpio0 28 0>;
>>  47                         };
>>  48
>>  49                         ssp2: ssp@80014000 {
>>  50                                 #address-cells = <1>;
>>  51                                 #size-cells = <0>;
>>  52                                 compatible = "fsl,imx28-spi";
>>  53                                 pinctrl-names = "default";
>>  54                                 pinctrl-0 = <&spi2_pins_a>;
>>  55                                 status = "okay";
>>  56
>>  57                                 flash: m25p80@0 {
>>  58                                         #address-cells = <1>;
>>  59                                         #size-cells = <1>;
>>  60                                         compatible = "sst,sst25vf016b";
>>  61                                         spi-max-frequency = <40000000>;
>>  62                                         reg = <0>;
>>  63                                 };
>>  64                         };
>>
>> Billows tell me they also have 3 roles in their sd host controller
>> corresponding to 3 kinds of different operation.
>> He used to create "sprd,name" property for this. Is it a good way or
>> anything else better?
>
> Why do you need to know? You can define parameters which can't be
> probed such as bus width, voltage, and clock freq. in DT for each
> host. The MMC subsys core will figure out the type of device attached.

I think you're right.
Thanks!
-orson

>
> Rob
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Orson Zhai]

On 2015年07月03日 13:44, Billows Wu (武洪涛) wrote:
> Hi Rob,
>
> Thanks for your reply.
> The MMC subsys core can figure out the type of the device attached. But it happaped after MMC probe function run over.
> If we want to distinguish MMC，SD or Wi-Fi in controller's probe function, we may by controller's register physical address, for example  20600000.sdio，2.400000.sdio or 20300000.sdio.   So we must know MMC controller's physical address is 0x20600000 and SD controller's physical address is 0x20300000. This reduces the code readability.
why not answer rob's 2nd comment on POWER_OFF flag in same time?
and you should use "in-line reply" without base64 encoding.

back to the question, i think you don't need to know the exact card type 
at probe time only a little bit earlier than in later work queue.
just printing out the devname and card type at work queue is good enough.
say some logs in work-queue as "20600000.sdio detecting... card type: emmc"

-orson
> If you have a good opinion how to distinguish MMC form SD or SDIO device in host controller probe function not by physical address, please tell us.
>
> Thanks!
> --billows
> ___________________________________
> From: Orson Zhai <orsonzhai-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Sent: Friday, July 3, 2015 10:50 AM
> To: Rob Herring
> Cc: Chunyan Zhang (张春艳); chris-OsFVWbfNK3isTnJN9+BGXg@public.gmane.org; Ulf Hansson; Lee Jones; Shawn Guo; Grant Likely; Rob Herring; Arnd Bergmann; Billows Wu (武洪涛); Wei Qiao (乔伟); Baolin Wang (王宝林); Ning Yang (杨宁); Orson Zhai (翟京); Jason Wu (吴霁爽); linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-kernel@vger.kernel.org; devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Subject: Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC
>
> On Thu, Jul 2, 2015 at 11:47 PM, Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> On Thu, Jul 2, 2015 at 4:26 AM, Orson Zhai <orsonzhai-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>>> Hi Rob,
>>>
>>> Thanks for your quick reply.
>>> I have one question to your last comment.
>>>
>>> On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>>>> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
>>>> <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org> wrote:
>>>>> From: Billows Wu <billows.wu-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
>> [...]
>>
>>>>> +const struct of_device_id sdhost_of_match[] = {
>>>>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>>>>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>>>>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>>>> What these are connected to is irrelevant to the driver and compatible
>>>> string. All these differences belong in the DT unless the IP blocks
>>>> are really different.
>>> It's my idea to let Billows do like this.
>>> I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
>>> Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
>>> And they may write one of their combo configuration like this:
>> That is a bit different as the host controller is operating in
>> completely different modes. In your case, the host controller is the
>> same and functions the same way, but just has different cards
>> attached.
>>
>>>   43                         ssp1: ssp@80012000 {
>>>   44                                 compatible = "fsl,imx28-mmc";
>>>   45                                 bus-width = <8>;
>>>   46                                 wp-gpios = <&gpio0 28 0>;
>>>   47                         };
>>>   48
>>>   49                         ssp2: ssp@80014000 {
>>>   50                                 #address-cells = <1>;
>>>   51                                 #size-cells = <0>;
>>>   52                                 compatible = "fsl,imx28-spi";
>>>   53                                 pinctrl-names = "default";
>>>   54                                 pinctrl-0 = <&spi2_pins_a>;
>>>   55                                 status = "okay";
>>>   56
>>>   57                                 flash: m25p80@0 {
>>>   58                                         #address-cells = <1>;
>>>   59                                         #size-cells = <1>;
>>>   60                                         compatible = "sst,sst25vf016b";
>>>   61                                         spi-max-frequency = <40000000>;
>>>   62                                         reg = <0>;
>>>   63                                 };
>>>   64                         };
>>>
>>> Billows tell me they also have 3 roles in their sd host controller
>>> corresponding to 3 kinds of different operation.
>>> He used to create "sprd,name" property for this. Is it a good way or
>>> anything else better?
>> Why do you need to know? You can define parameters which can't be
>> probed such as bus width, voltage, and clock freq. in DT for each
>> host. The MMC subsys core will figure out the type of device attached.
> I think you're right.
> Thanks!
> -orson
>
>> Rob

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC

[Orson Zhai]

On 2015年07月03日 13:44, Billows Wu (武洪涛) wrote:
> Hi Rob,
>
> Thanks for your reply.
> The MMC subsys core can figure out the type of the device attached. But it happaped after MMC probe function run over.
> If we want to distinguish MMC，SD or Wi-Fi in controller's probe function, we may by controller's register physical address, for example  20600000.sdio，2.400000.sdio or 20300000.sdio.   So we must know MMC controller's physical address is 0x20600000 and SD controller's physical address is 0x20300000. This reduces the code readability.
why not answer rob's 2nd comment on POWER_OFF flag in same time?
and you should use "in-line reply" without base64 encoding.

back to the question, i think you don't need to know the exact card type 
at probe time only a little bit earlier than in later work queue.
just printing out the devname and card type at work queue is good enough.
say some logs in work-queue as "20600000.sdio detecting... card type: emmc"

-orson
> If you have a good opinion how to distinguish MMC form SD or SDIO device in host controller probe function not by physical address, please tell us.
>
> Thanks!
> --billows
> ___________________________________
> From: Orson Zhai <orsonzhai@gmail.com>
> Sent: Friday, July 3, 2015 10:50 AM
> To: Rob Herring
> Cc: Chunyan Zhang (张春艳); chris@printf.net; Ulf Hansson; Lee Jones; Shawn Guo; Grant Likely; Rob Herring; Arnd Bergmann; Billows Wu (武洪涛); Wei Qiao (乔伟); Baolin Wang (王宝林); Ning Yang (杨宁); Orson Zhai (翟京); Jason Wu (吴霁爽); linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Subject: Re: [RFC PATCH] mmc: sprd: add MMC host driver for Spreadtrum SoC
>
> On Thu, Jul 2, 2015 at 11:47 PM, Rob Herring <robherring2@gmail.com> wrote:
>> On Thu, Jul 2, 2015 at 4:26 AM, Orson Zhai <orsonzhai@gmail.com> wrote:
>>> Hi Rob,
>>>
>>> Thanks for your quick reply.
>>> I have one question to your last comment.
>>>
>>> On Thu, Jul 2, 2015 at 1:50 AM, Rob Herring <robherring2@gmail.com> wrote:
>>>> On Wed, Jul 1, 2015 at 2:23 AM, Chunyan Zhang
>>>> <chunyan.zhang@spreadtrum.com> wrote:
>>>>> From: Billows Wu <billows.wu@spreadtrum.com>
>> [...]
>>
>>>>> +const struct of_device_id sdhost_of_match[] = {
>>>>> +       {.compatible = "sprd,sd-sdhost-3.0", .data = &sd_caps_info,},
>>>>> +       {.compatible = "sprd,wifi-sdhost-3.0", .data = &wifi_caps_info,},
>>>>> +       {.compatible = "sprd,emmc-sdhost-3.0",  .data = &emmc_caps_info,},
>>>> What these are connected to is irrelevant to the driver and compatible
>>>> string. All these differences belong in the DT unless the IP blocks
>>>> are really different.
>>> It's my idea to let Billows do like this.
>>> I learn from SSP part in freescale  "arch/arm/boot/dts/imx28-evk.dts"
>>> Their ssp0-ssp2 each have 2 roles, mmc or generic spi bus.
>>> And they may write one of their combo configuration like this:
>> That is a bit different as the host controller is operating in
>> completely different modes. In your case, the host controller is the
>> same and functions the same way, but just has different cards
>> attached.
>>
>>>   43                         ssp1: ssp@80012000 {
>>>   44                                 compatible = "fsl,imx28-mmc";
>>>   45                                 bus-width = <8>;
>>>   46                                 wp-gpios = <&gpio0 28 0>;
>>>   47                         };
>>>   48
>>>   49                         ssp2: ssp@80014000 {
>>>   50                                 #address-cells = <1>;
>>>   51                                 #size-cells = <0>;
>>>   52                                 compatible = "fsl,imx28-spi";
>>>   53                                 pinctrl-names = "default";
>>>   54                                 pinctrl-0 = <&spi2_pins_a>;
>>>   55                                 status = "okay";
>>>   56
>>>   57                                 flash: m25p80@0 {
>>>   58                                         #address-cells = <1>;
>>>   59                                         #size-cells = <1>;
>>>   60                                         compatible = "sst,sst25vf016b";
>>>   61                                         spi-max-frequency = <40000000>;
>>>   62                                         reg = <0>;
>>>   63                                 };
>>>   64                         };
>>>
>>> Billows tell me they also have 3 roles in their sd host controller
>>> corresponding to 3 kinds of different operation.
>>> He used to create "sprd,name" property for this. Is it a good way or
>>> anything else better?
>> Why do you need to know? You can define parameters which can't be
>> probed such as bus width, voltage, and clock freq. in DT for each
>> host. The MMC subsys core will figure out the type of device attached.
> I think you're right.
> Thanks!
> -orson
>
>> Rob