From: Roger Quadros <rogerq@ti.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>, linux-input@vger.kernel.org
Cc: Jianchun Bian <jcbian@pixcir.com.cn>, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/6] Input: pixcir_i2c_ts - switch the device over to gpiod
Date: Tue, 7 Jul 2015 13:55:15 +0300 [thread overview]
Message-ID: <559BB013.1060004@ti.com> (raw)
In-Reply-To: <1436229011-29655-2-git-send-email-dmitry.torokhov@gmail.com>
On 07/07/15 03:30, Dmitry Torokhov wrote:
> This allows uniform parsing on legacy, DT and ACPI systems.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Roger Quadros <rogerq@ti.com>
cheers,
-roger
> ---
> drivers/input/touchscreen/pixcir_i2c_ts.c | 26 +++++++++-----------------
> include/linux/platform_data/pixcir_i2c_ts.h | 1 -
> 2 files changed, 9 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index ccafa75..9093aa9 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -25,8 +25,8 @@
> #include <linux/input.h>
> #include <linux/input/mt.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/of.h>
> -#include <linux/of_gpio.h>
> #include <linux/of_device.h>
> #include <linux/platform_data/pixcir_i2c_ts.h>
>
> @@ -35,6 +35,7 @@
> struct pixcir_i2c_ts_data {
> struct i2c_client *client;
> struct input_dev *input;
> + struct gpio_desc *gpio_attb;
> const struct pixcir_ts_platform_data *pdata;
> bool running;
> int max_fingers; /* Max fingers supported in this instance */
> @@ -161,7 +162,6 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
> static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
> {
> struct pixcir_i2c_ts_data *tsdata = dev_id;
> - const struct pixcir_ts_platform_data *pdata = tsdata->pdata;
> struct pixcir_report_data report;
>
> while (tsdata->running) {
> @@ -171,7 +171,7 @@ static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
> /* report it */
> pixcir_ts_report(tsdata, &report);
>
> - if (gpio_get_value(pdata->gpio_attb)) {
> + if (gpiod_get_value(tsdata->gpio_attb)) {
> if (report.num_touches) {
> /*
> * Last report with no finger up?
> @@ -427,9 +427,6 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>
> pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data;
>
> - pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0);
> - /* gpio_attb validity is checked in probe */
> -
> if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) {
> dev_err(dev, "Failed to get touchscreen-size-x property\n");
> return ERR_PTR(-EINVAL);
> @@ -442,8 +439,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
> }
> pdata->y_max -= 1;
>
> - dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
> - pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
> + dev_dbg(dev, "%s: x %d, y %d\n", __func__,
> + pdata->x_max + 1, pdata->y_max + 1);
>
> return pdata;
> }
> @@ -476,11 +473,6 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
> return -EINVAL;
> }
>
> - if (!gpio_is_valid(pdata->gpio_attb)) {
> - dev_err(dev, "Invalid gpio_attb in pdata\n");
> - return -EINVAL;
> - }
> -
> if (!pdata->chip.max_fingers) {
> dev_err(dev, "Invalid max_fingers in pdata\n");
> return -EINVAL;
> @@ -530,10 +522,10 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>
> input_set_drvdata(input, tsdata);
>
> - error = devm_gpio_request_one(dev, pdata->gpio_attb,
> - GPIOF_DIR_IN, "pixcir_i2c_attb");
> - if (error) {
> - dev_err(dev, "Failed to request ATTB gpio\n");
> + tsdata->gpio_attb = devm_gpiod_get(dev, "attb", GPIOD_IN);
> + if (IS_ERR(tsdata->gpio_attb)) {
> + error = PTR_ERR(tsdata->gpio_attb);
> + dev_err(dev, "Failed to request ATTB gpio: %d\n", error);
> return error;
> }
>
> diff --git a/include/linux/platform_data/pixcir_i2c_ts.h b/include/linux/platform_data/pixcir_i2c_ts.h
> index 7bae83b..646af6f 100644
> --- a/include/linux/platform_data/pixcir_i2c_ts.h
> +++ b/include/linux/platform_data/pixcir_i2c_ts.h
> @@ -57,7 +57,6 @@ struct pixcir_i2c_chip_data {
> struct pixcir_ts_platform_data {
> int x_max;
> int y_max;
> - int gpio_attb; /* GPIO connected to ATTB line */
> struct pixcir_i2c_chip_data chip;
> };
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
<linux-input@vger.kernel.org>
Cc: Jianchun Bian <jcbian@pixcir.com.cn>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/6] Input: pixcir_i2c_ts - switch the device over to gpiod
Date: Tue, 7 Jul 2015 13:55:15 +0300 [thread overview]
Message-ID: <559BB013.1060004@ti.com> (raw)
In-Reply-To: <1436229011-29655-2-git-send-email-dmitry.torokhov@gmail.com>
On 07/07/15 03:30, Dmitry Torokhov wrote:
> This allows uniform parsing on legacy, DT and ACPI systems.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Roger Quadros <rogerq@ti.com>
cheers,
-roger
> ---
> drivers/input/touchscreen/pixcir_i2c_ts.c | 26 +++++++++-----------------
> include/linux/platform_data/pixcir_i2c_ts.h | 1 -
> 2 files changed, 9 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index ccafa75..9093aa9 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -25,8 +25,8 @@
> #include <linux/input.h>
> #include <linux/input/mt.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/of.h>
> -#include <linux/of_gpio.h>
> #include <linux/of_device.h>
> #include <linux/platform_data/pixcir_i2c_ts.h>
>
> @@ -35,6 +35,7 @@
> struct pixcir_i2c_ts_data {
> struct i2c_client *client;
> struct input_dev *input;
> + struct gpio_desc *gpio_attb;
> const struct pixcir_ts_platform_data *pdata;
> bool running;
> int max_fingers; /* Max fingers supported in this instance */
> @@ -161,7 +162,6 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
> static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
> {
> struct pixcir_i2c_ts_data *tsdata = dev_id;
> - const struct pixcir_ts_platform_data *pdata = tsdata->pdata;
> struct pixcir_report_data report;
>
> while (tsdata->running) {
> @@ -171,7 +171,7 @@ static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
> /* report it */
> pixcir_ts_report(tsdata, &report);
>
> - if (gpio_get_value(pdata->gpio_attb)) {
> + if (gpiod_get_value(tsdata->gpio_attb)) {
> if (report.num_touches) {
> /*
> * Last report with no finger up?
> @@ -427,9 +427,6 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>
> pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data;
>
> - pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0);
> - /* gpio_attb validity is checked in probe */
> -
> if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) {
> dev_err(dev, "Failed to get touchscreen-size-x property\n");
> return ERR_PTR(-EINVAL);
> @@ -442,8 +439,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
> }
> pdata->y_max -= 1;
>
> - dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
> - pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
> + dev_dbg(dev, "%s: x %d, y %d\n", __func__,
> + pdata->x_max + 1, pdata->y_max + 1);
>
> return pdata;
> }
> @@ -476,11 +473,6 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
> return -EINVAL;
> }
>
> - if (!gpio_is_valid(pdata->gpio_attb)) {
> - dev_err(dev, "Invalid gpio_attb in pdata\n");
> - return -EINVAL;
> - }
> -
> if (!pdata->chip.max_fingers) {
> dev_err(dev, "Invalid max_fingers in pdata\n");
> return -EINVAL;
> @@ -530,10 +522,10 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>
> input_set_drvdata(input, tsdata);
>
> - error = devm_gpio_request_one(dev, pdata->gpio_attb,
> - GPIOF_DIR_IN, "pixcir_i2c_attb");
> - if (error) {
> - dev_err(dev, "Failed to request ATTB gpio\n");
> + tsdata->gpio_attb = devm_gpiod_get(dev, "attb", GPIOD_IN);
> + if (IS_ERR(tsdata->gpio_attb)) {
> + error = PTR_ERR(tsdata->gpio_attb);
> + dev_err(dev, "Failed to request ATTB gpio: %d\n", error);
> return error;
> }
>
> diff --git a/include/linux/platform_data/pixcir_i2c_ts.h b/include/linux/platform_data/pixcir_i2c_ts.h
> index 7bae83b..646af6f 100644
> --- a/include/linux/platform_data/pixcir_i2c_ts.h
> +++ b/include/linux/platform_data/pixcir_i2c_ts.h
> @@ -57,7 +57,6 @@ struct pixcir_i2c_chip_data {
> struct pixcir_ts_platform_data {
> int x_max;
> int y_max;
> - int gpio_attb; /* GPIO connected to ATTB line */
> struct pixcir_i2c_chip_data chip;
> };
>
>
next prev parent reply other threads:[~2015-07-07 10:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-07 0:30 [PATCH 1/6] Input: pixcir_i2c_ts - move platform data Dmitry Torokhov
2015-07-07 0:30 ` [PATCH 2/6] Input: pixcir_i2c_ts - switch the device over to gpiod Dmitry Torokhov
2015-07-07 10:55 ` Roger Quadros [this message]
2015-07-07 10:55 ` Roger Quadros
2015-07-07 0:30 ` [PATCH 3/6] Input: pixcir_i2c_ts - allow using with GPIO expanders Dmitry Torokhov
2015-07-07 10:55 ` Roger Quadros
2015-07-07 10:55 ` Roger Quadros
2015-07-07 0:30 ` [PATCH 4/6] Input: pixcir_i2c_ts - add RESET gpio Dmitry Torokhov
2015-07-07 0:30 ` [PATCH 5/6] Input: pixcir_i2c_ts - simplify input device initialization Dmitry Torokhov
2015-07-07 11:39 ` Roger Quadros
2015-07-07 11:39 ` Roger Quadros
2015-07-07 0:30 ` [PATCH 6/6] Input: pixcir_i2c_ts - use standard OF touchscreen parsing code Dmitry Torokhov
2015-07-07 11:47 ` Roger Quadros
2015-07-07 11:47 ` Roger Quadros
2015-07-07 10:46 ` [PATCH 1/6] Input: pixcir_i2c_ts - move platform data Roger Quadros
2015-07-07 10:46 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559BB013.1060004@ti.com \
--to=rogerq@ti.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jcbian@pixcir.com.cn \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.