From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
To: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>,
balbi-l0cyMroinI0@public.gmane.org
Cc: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role
Date: Wed, 8 Jul 2015 16:11:23 +0300 [thread overview]
Message-ID: <559D217B.5000500@cogentembedded.com> (raw)
In-Reply-To: <1436351860-28813-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
Hello.
On 7/8/2015 1:37 PM, Roger Quadros wrote:
> We can't rely just on dr_mode to decide if we're in host or gadget
> mode when we're configured as otg/dual-role. So while dr_mode is
> OTG, we find out from the otg state machine if we're in host
> or gadget mode and take the necessary actions during suspend/resume.
> Also make sure that we disable OTG irq and events during system suspend
> so that we don't lockup the system during system suspend/resume.
> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> ---
> drivers/usb/dwc3/core.c | 27 +++++++++------------------
> 1 file changed, 9 insertions(+), 18 deletions(-)
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index e3c094d..3784287 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1444,18 +1444,15 @@ static int dwc3_suspend(struct device *dev)
> dwc->octl = dwc3_readl(dwc->regs, DWC3_OCTL);
> dwc->oevt = dwc3_readl(dwc->regs, DWC3_OEVT);
> dwc->oevten = dwc3_readl(dwc->regs, DWC3_OEVTEN);
> + dwc3_writel(dwc->regs, DWC3_OEVTEN, 0);
> + disable_irq(dwc->otg_irq);
> }
>
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> + if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
> + ((dwc->dr_mode == USB_DR_MODE_OTG) && dwc->fsm->protocol == PROTO_GADGET))
Hum, enclosing the first == op into parens and not doing it to the second
== op doesn't look very consistent... :-)
[...]
> @@ -1495,18 +1492,12 @@ static int dwc3_resume(struct device *dev)
> dwc3_writel(dwc->regs, DWC3_OCTL, dwc->octl);
> dwc3_writel(dwc->regs, DWC3_OEVT, dwc->oevt);
> dwc3_writel(dwc->regs, DWC3_OEVTEN, dwc->oevten);
> + enable_irq(dwc->otg_irq);
> }
>
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> + if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
> + ((dwc->dr_mode == USB_DR_MODE_OTG) && dwc->fsm->protocol == PROTO_GADGET))
Same here...
[...]
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Roger Quadros <rogerq@ti.com>, balbi@ti.com
Cc: tony@atomide.com, Joao.Pinto@synopsys.com,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org
Subject: Re: [PATCH v3 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role
Date: Wed, 8 Jul 2015 16:11:23 +0300 [thread overview]
Message-ID: <559D217B.5000500@cogentembedded.com> (raw)
In-Reply-To: <1436351860-28813-1-git-send-email-rogerq@ti.com>
Hello.
On 7/8/2015 1:37 PM, Roger Quadros wrote:
> We can't rely just on dr_mode to decide if we're in host or gadget
> mode when we're configured as otg/dual-role. So while dr_mode is
> OTG, we find out from the otg state machine if we're in host
> or gadget mode and take the necessary actions during suspend/resume.
> Also make sure that we disable OTG irq and events during system suspend
> so that we don't lockup the system during system suspend/resume.
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/usb/dwc3/core.c | 27 +++++++++------------------
> 1 file changed, 9 insertions(+), 18 deletions(-)
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index e3c094d..3784287 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1444,18 +1444,15 @@ static int dwc3_suspend(struct device *dev)
> dwc->octl = dwc3_readl(dwc->regs, DWC3_OCTL);
> dwc->oevt = dwc3_readl(dwc->regs, DWC3_OEVT);
> dwc->oevten = dwc3_readl(dwc->regs, DWC3_OEVTEN);
> + dwc3_writel(dwc->regs, DWC3_OEVTEN, 0);
> + disable_irq(dwc->otg_irq);
> }
>
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> + if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
> + ((dwc->dr_mode == USB_DR_MODE_OTG) && dwc->fsm->protocol == PROTO_GADGET))
Hum, enclosing the first == op into parens and not doing it to the second
== op doesn't look very consistent... :-)
[...]
> @@ -1495,18 +1492,12 @@ static int dwc3_resume(struct device *dev)
> dwc3_writel(dwc->regs, DWC3_OCTL, dwc->octl);
> dwc3_writel(dwc->regs, DWC3_OEVT, dwc->oevt);
> dwc3_writel(dwc->regs, DWC3_OEVTEN, dwc->oevten);
> + enable_irq(dwc->otg_irq);
> }
>
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> + if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
> + ((dwc->dr_mode == USB_DR_MODE_OTG) && dwc->fsm->protocol == PROTO_GADGET))
Same here...
[...]
WBR, Sergei
next prev parent reply other threads:[~2015-07-08 13:11 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 10:31 [PATCH v3 0/9] usb: dwc3: add dual-role support Roger Quadros
2015-07-08 10:31 ` Roger Quadros
2015-07-08 10:31 ` [PATCH v3 1/9] " Roger Quadros
2015-07-08 10:31 ` Roger Quadros
2015-07-08 10:31 ` [PATCH v3 2/9] usb: dwc3: core.h: add some register definitions Roger Quadros
2015-07-08 10:31 ` Roger Quadros
2015-07-08 10:36 ` [PATCH v3 3/9] usb: dwc3: dwc3-omap: Make the wrapper interrupt shared Roger Quadros
2015-07-08 10:36 ` Roger Quadros
2015-07-08 10:36 ` [PATCH v3 4/9] usb: dwc3: core: Adapt to named interrupts Roger Quadros
2015-07-08 10:36 ` Roger Quadros
[not found] ` <1436351795-28556-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-07-08 13:06 ` Sergei Shtylyov
2015-07-08 13:06 ` Sergei Shtylyov
2015-07-08 14:43 ` Roger Quadros
2015-07-08 14:43 ` Roger Quadros
2015-07-08 10:36 ` [PATCH v3 5/9] usb: dwc3: core: make dual-role work with OTG irq Roger Quadros
2015-07-08 10:36 ` Roger Quadros
2015-07-08 10:36 ` [PATCH v3 6/9] usb: dwc3: save/restore OTG registers during suspend/resume Roger Quadros
2015-07-08 10:36 ` Roger Quadros
2015-07-08 10:37 ` [PATCH v3 7/9] usb: dwc3: gadget: Fix suspend/resume during dual-role mode Roger Quadros
2015-07-08 10:37 ` Roger Quadros
2015-07-08 10:37 ` [PATCH v3 8/9] usb: dwc3: core: Prevent otg events from disabling themselves Roger Quadros
2015-07-08 10:37 ` Roger Quadros
2015-07-08 10:37 ` [PATCH v3 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Roger Quadros
2015-07-08 10:37 ` Roger Quadros
[not found] ` <1436351860-28813-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-07-08 13:11 ` Sergei Shtylyov [this message]
2015-07-08 13:11 ` Sergei Shtylyov
[not found] ` <559D217B.5000500-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2015-07-08 14:44 ` Roger Quadros
2015-07-08 14:44 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559D217B.5000500@cogentembedded.com \
--to=sergei.shtylyov-m4dtvfq/zs1mrggop+s0pdbpr1lh4cv8@public.gmane.org \
--cc=Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rogerq-l0cyMroinI0@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.