* compile failure linux 3.10 with gcc 4.9.3 for mips
@ 2015-07-14 18:04 Reinoud Koornstra
2015-07-15 8:03 ` Markos Chandras
0 siblings, 1 reply; 8+ messages in thread
From: Reinoud Koornstra @ 2015-07-14 18:04 UTC (permalink / raw)
To: linux-mips
Hi Everyone,
Did anybody enounter the following compiler problem with linux 3.10.81?
gcc version is 4.9.3 for mips and binutils 2.25
arch/mips/kernel/r4k_fpu.S: Assembler messages:
arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f0,272+0($4)'
arch/mips/kernel/r4k_fpu.S:60: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f2,272+16($4)'
arch/mips/kernel/r4k_fpu.S:61: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f4,272+32($4)'
arch/mips/kernel/r4k_fpu.S:62: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f6,272+48($4)'
arch/mips/kernel/r4k_fpu.S:63: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f8,272+64($4)'
arch/mips/kernel/r4k_fpu.S:64: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f10,272+80($4)'
arch/mips/kernel/r4k_fpu.S:65: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f12,272+96($4)'
arch/mips/kernel/r4k_fpu.S:66: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f14,272+112($4)'
arch/mips/kernel/r4k_fpu.S:67: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f16,272+128($4)'
arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f18,272+144($4)'
arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f20,272+160($4)'
arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f22,272+176($4)'
arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f24,272+192($4)'
arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f26,272+208($4)'
arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f28,272+224($4)'
arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f30,272+240($4)'
arch/mips/kernel/r4k_fpu.S:135: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f0,272+0($4)'
arch/mips/kernel/r4k_fpu.S:136: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f2,272+16($4)'
arch/mips/kernel/r4k_fpu.S:137: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f4,272+32($4)'
arch/mips/kernel/r4k_fpu.S:138: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f6,272+48($4)'
arch/mips/kernel/r4k_fpu.S:139: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f8,272+64($4)'
arch/mips/kernel/r4k_fpu.S:140: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f10,272+80($4)'
arch/mips/kernel/r4k_fpu.S:141: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f12,272+96($4)'
arch/mips/kernel/r4k_fpu.S:142: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f14,272+112($4)'
arch/mips/kernel/r4k_fpu.S:143: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f16,272+128($4)'
arch/mips/kernel/r4k_fpu.S:144: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f18,272+144($4)'
arch/mips/kernel/r4k_fpu.S:145: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f20,272+160($4)'
arch/mips/kernel/r4k_fpu.S:146: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f22,272+176($4)'
arch/mips/kernel/r4k_fpu.S:147: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f24,272+192($4)'
arch/mips/kernel/r4k_fpu.S:148: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f26,272+208($4)'
arch/mips/kernel/r4k_fpu.S:149: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f28,272+224($4)'
arch/mips/kernel/r4k_fpu.S:150: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f30,272+240($4)'
Thanks,
Reinoud.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: compile failure linux 3.10 with gcc 4.9.3 for mips
@ 2015-07-15 8:03 ` Markos Chandras
0 siblings, 0 replies; 8+ messages in thread
From: Markos Chandras @ 2015-07-15 8:03 UTC (permalink / raw)
To: linux-mips
On 07/14/2015 07:04 PM, Reinoud Koornstra wrote:
> Hi Everyone,
>
> Did anybody enounter the following compiler problem with linux 3.10.81?
> gcc version is 4.9.3 for mips and binutils 2.25
>
> arch/mips/kernel/r4k_fpu.S: Assembler messages:
> arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this
> processor: mips3 (mips3) `sdc1 $f0,272+0($4)'
I think this is a known bug and it needs a backport of
https://patchwork.linux-mips.org/patch/8355/
--
markos
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: compile failure linux 3.10 with gcc 4.9.3 for mips
@ 2015-07-15 8:03 ` Markos Chandras
0 siblings, 0 replies; 8+ messages in thread
From: Markos Chandras @ 2015-07-15 8:03 UTC (permalink / raw)
To: linux-mips
On 07/14/2015 07:04 PM, Reinoud Koornstra wrote:
> Hi Everyone,
>
> Did anybody enounter the following compiler problem with linux 3.10.81?
> gcc version is 4.9.3 for mips and binutils 2.25
>
> arch/mips/kernel/r4k_fpu.S: Assembler messages:
> arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this
> processor: mips3 (mips3) `sdc1 $f0,272+0($4)'
I think this is a known bug and it needs a backport of
https://patchwork.linux-mips.org/patch/8355/
--
markos
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: compile failure linux 3.10 with gcc 4.9.3 for mips
2015-07-15 8:03 ` Markos Chandras
(?)
@ 2015-07-15 19:56 ` Reinoud Koornstra
2015-07-16 8:42 ` Markos Chandras
-1 siblings, 1 reply; 8+ messages in thread
From: Reinoud Koornstra @ 2015-07-15 19:56 UTC (permalink / raw)
To: Markos Chandras; +Cc: linux-mips
Thanks for your answer.
Is this patch going in upstream
Thanks,
Reinoud
On Wed, Jul 15, 2015 at 2:03 AM, Markos Chandras
<Markos.Chandras@imgtec.com> wrote:
> On 07/14/2015 07:04 PM, Reinoud Koornstra wrote:
>> Hi Everyone,
>>
>> Did anybody enounter the following compiler problem with linux 3.10.81?
>> gcc version is 4.9.3 for mips and binutils 2.25
>>
>> arch/mips/kernel/r4k_fpu.S: Assembler messages:
>> arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this
>> processor: mips3 (mips3) `sdc1 $f0,272+0($4)'
>
> I think this is a known bug and it needs a backport of
>
> https://patchwork.linux-mips.org/patch/8355/
>
> --
> markos
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: compile failure linux 3.10 with gcc 4.9.3 for mips
@ 2015-07-16 8:42 ` Markos Chandras
0 siblings, 0 replies; 8+ messages in thread
From: Markos Chandras @ 2015-07-16 8:42 UTC (permalink / raw)
To: Reinoud Koornstra; +Cc: linux-mips
On 07/15/2015 08:56 PM, Reinoud Koornstra wrote:
> Thanks for your answer.
> Is this patch going in upstream
> Thanks,
>
> Reinoud
>
It's already upstream just not in 3.10. A more recent kernel should
compile fine with your toolchain.
--
markos
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: compile failure linux 3.10 with gcc 4.9.3 for mips
@ 2015-07-16 8:42 ` Markos Chandras
0 siblings, 0 replies; 8+ messages in thread
From: Markos Chandras @ 2015-07-16 8:42 UTC (permalink / raw)
To: Reinoud Koornstra; +Cc: linux-mips
On 07/15/2015 08:56 PM, Reinoud Koornstra wrote:
> Thanks for your answer.
> Is this patch going in upstream
> Thanks,
>
> Reinoud
>
It's already upstream just not in 3.10. A more recent kernel should
compile fine with your toolchain.
--
markos
^ permalink raw reply [flat|nested] 8+ messages in thread
* compile failure linux 3.10 with gcc 4.9.3 for mips
@ 2015-07-13 23:52 Reinoud Koornstra
2015-07-15 4:38 ` Khem Raj
0 siblings, 1 reply; 8+ messages in thread
From: Reinoud Koornstra @ 2015-07-13 23:52 UTC (permalink / raw)
To: linux-kernel
Hi Everyone,
Did anybody enounter the following compiler problem with linux 3.10.81?
gcc version is 4.9.3 for mips.
arch/mips/kernel/r4k_fpu.S: Assembler messages:
arch/mips/kernel/r4k_fpu.S:59: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f0,272+0($4)'
arch/mips/kernel/r4k_fpu.S:60: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f2,272+16($4)'
arch/mips/kernel/r4k_fpu.S:61: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f4,272+32($4)'
arch/mips/kernel/r4k_fpu.S:62: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f6,272+48($4)'
arch/mips/kernel/r4k_fpu.S:63: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f8,272+64($4)'
arch/mips/kernel/r4k_fpu.S:64: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f10,272+80($4)'
arch/mips/kernel/r4k_fpu.S:65: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f12,272+96($4)'
arch/mips/kernel/r4k_fpu.S:66: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f14,272+112($4)'
arch/mips/kernel/r4k_fpu.S:67: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f16,272+128($4)'
arch/mips/kernel/r4k_fpu.S:68: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f18,272+144($4)'
arch/mips/kernel/r4k_fpu.S:69: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f20,272+160($4)'
arch/mips/kernel/r4k_fpu.S:70: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f22,272+176($4)'
arch/mips/kernel/r4k_fpu.S:71: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f24,272+192($4)'
arch/mips/kernel/r4k_fpu.S:72: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f26,272+208($4)'
arch/mips/kernel/r4k_fpu.S:73: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f28,272+224($4)'
arch/mips/kernel/r4k_fpu.S:74: Error: opcode not supported on this
processor: mips3 (mips3) `sdc1 $f30,272+240($4)'
arch/mips/kernel/r4k_fpu.S:135: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f0,272+0($4)'
arch/mips/kernel/r4k_fpu.S:136: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f2,272+16($4)'
arch/mips/kernel/r4k_fpu.S:137: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f4,272+32($4)'
arch/mips/kernel/r4k_fpu.S:138: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f6,272+48($4)'
arch/mips/kernel/r4k_fpu.S:139: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f8,272+64($4)'
arch/mips/kernel/r4k_fpu.S:140: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f10,272+80($4)'
arch/mips/kernel/r4k_fpu.S:141: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f12,272+96($4)'
arch/mips/kernel/r4k_fpu.S:142: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f14,272+112($4)'
arch/mips/kernel/r4k_fpu.S:143: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f16,272+128($4)'
arch/mips/kernel/r4k_fpu.S:144: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f18,272+144($4)'
arch/mips/kernel/r4k_fpu.S:145: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f20,272+160($4)'
arch/mips/kernel/r4k_fpu.S:146: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f22,272+176($4)'
arch/mips/kernel/r4k_fpu.S:147: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f24,272+192($4)'
arch/mips/kernel/r4k_fpu.S:148: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f26,272+208($4)'
arch/mips/kernel/r4k_fpu.S:149: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f28,272+224($4)'
arch/mips/kernel/r4k_fpu.S:150: Error: opcode not supported on this
processor: mips3 (mips3) `ldc1 $f30,272+240($4)'
Thanks,
Reinoud.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-07-16 8:42 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-07-14 18:04 compile failure linux 3.10 with gcc 4.9.3 for mips Reinoud Koornstra
2015-07-15 8:03 ` Markos Chandras
2015-07-15 8:03 ` Markos Chandras
2015-07-15 19:56 ` Reinoud Koornstra
2015-07-16 8:42 ` Markos Chandras
2015-07-16 8:42 ` Markos Chandras
-- strict thread matches above, loose matches on Subject: below --
2015-07-13 23:52 Reinoud Koornstra
2015-07-15 4:38 ` Khem Raj
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.