[PATCH 0/6] Input: standardize on "wakeup-source" property

[PATCH 0/6] Input: standardize on "wakeup-source" property

[Dmitry Torokhov]

Hi,

Currently input drivers use many forms of annotating devices that should
be set up as wakeup sources for the system. This patch series converts them
all to use "wakeup-source" name (to match what i2c devices are using) while
keeping old names as fallback to keep compatibility with existing DTSes.

Maybe in the future we could move parsing of "wakeup-source" into device
core.

Thanks.

-- 
Dmitry

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/6] Input: standardize on "wakeup-source" property

[Dmitry Torokhov]

Hi,

Currently input drivers use many forms of annotating devices that should
be set up as wakeup sources for the system. This patch series converts them
all to use "wakeup-source" name (to match what i2c devices are using) while
keeping old names as fallback to keep compatibility with existing DTSes.

Maybe in the future we could move parsing of "wakeup-source" into device
core.

Thanks.

-- 
Dmitry

[PATCH 1/6] Input: matrix_keypad - change name of wakeup property to "wakeup-source"

[Dmitry Torokhov]

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt | 2 +-
 drivers/input/keyboard/matrix_keypad.c                         | 6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
index ead641c..4d86059 100644
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -19,7 +19,7 @@ Required Properties:
 
 Optional Properties:
 - linux,no-autorepeat:	do no enable autorepeat feature.
-- linux,wakeup:		use any event on keypad as wakeup event.
+- wakeup-source:	use any event on keypad as wakeup event.
 - debounce-delay-ms:	debounce interval in milliseconds
 - col-scan-delay-us:	delay, measured in microseconds, that is needed
 			before we can scan keypad after activating column gpio
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index b370a59..7f12b65 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -425,8 +425,10 @@ matrix_keypad_parse_dt(struct device *dev)
 
 	if (of_get_property(np, "linux,no-autorepeat", NULL))
 		pdata->no_autorepeat = true;
-	if (of_get_property(np, "linux,wakeup", NULL))
-		pdata->wakeup = true;
+
+	pdata->wakeup = of_property_read_bool(np, "wakeup-source") ||
+			of_property_read_bool(np, "linux,wakeup"); /* legacy */
+
 	if (of_get_property(np, "gpio-activelow", NULL))
 		pdata->active_low = true;
 
-- 
2.4.3.573.g4eafbef

[PATCH 2/6] Input: ads7846 - change name of wakeup property to "wakeup-source"

[Dmitry Torokhov]

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/input/ads7846.txt | 2 +-
 drivers/input/touchscreen/ads7846.c                 | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
index 5f7619c..df8b127 100644
--- a/Documentation/devicetree/bindings/input/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/ads7846.txt
@@ -64,7 +64,7 @@ Optional properties:
 					pendown-gpio (u32).
 	pendown-gpio			GPIO handle describing the pin the !PENIRQ
 					line is connected to.
-	linux,wakeup			use any event on touchscreen as wakeup event.
+	wakeup-source			use any event on touchscreen as wakeup event.
 
 
 Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index e4eb8a6..0f5f968 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1234,7 +1234,8 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
 	of_property_read_u32(node, "ti,pendown-gpio-debounce",
 			     &pdata->gpio_pendown_debounce);
 
-	pdata->wakeup = of_property_read_bool(node, "linux,wakeup");
+	pdata->wakeup = of_property_read_bool(node, "wakeup-source") ||
+			of_property_read_bool(node, "linux,wakeup");
 
 	pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0);
 
-- 
2.4.3.573.g4eafbef

[PATCH 3/6] Input: pmic8xxx-keypad - change name of wakeup property

[Dmitry Torokhov]

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt |  2 +-
 drivers/input/keyboard/pmic8xxx-keypad.c                       | 10 ++++++----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
index 7d8cb92..ee62156 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -33,7 +33,7 @@ PROPERTIES
 	Value type: <bool>
 	Definition: don't enable autorepeat feature.
 
-- linux,keypad-wakeup:
+- wakeup-source:
 	Usage: optional
 	Value type: <bool>
 	Definition: use any event on keypad as wakeup event.
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 32580af..5c68e3f 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -507,6 +507,7 @@ static void pmic8xxx_kp_close(struct input_dev *dev)
  */
 static int pmic8xxx_kp_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	unsigned int rows, cols;
 	bool repeat;
 	bool wakeup;
@@ -524,10 +525,11 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	repeat = !of_property_read_bool(pdev->dev.of_node,
-					"linux,input-no-autorepeat");
-	wakeup = of_property_read_bool(pdev->dev.of_node,
-					"linux,keypad-wakeup");
+	repeat = !of_property_read_bool(np, "linux,input-no-autorepeat");
+
+	wakeup = of_property_read_bool(np, "wakeup-source") ||
+		 /* legacy name */
+		 of_property_read_bool(np, "linux,keypad-wakeup");
 
 	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
 	if (!kp)
-- 
2.4.3.573.g4eafbef

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/6] Input: pmic8xxx-keypad - change name of wakeup property

[Dmitry Torokhov]

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt |  2 +-
 drivers/input/keyboard/pmic8xxx-keypad.c                       | 10 ++++++----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
index 7d8cb92..ee62156 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -33,7 +33,7 @@ PROPERTIES
 	Value type: <bool>
 	Definition: don't enable autorepeat feature.
 
-- linux,keypad-wakeup:
+- wakeup-source:
 	Usage: optional
 	Value type: <bool>
 	Definition: use any event on keypad as wakeup event.
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 32580af..5c68e3f 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -507,6 +507,7 @@ static void pmic8xxx_kp_close(struct input_dev *dev)
  */
 static int pmic8xxx_kp_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	unsigned int rows, cols;
 	bool repeat;
 	bool wakeup;
@@ -524,10 +525,11 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	repeat = !of_property_read_bool(pdev->dev.of_node,
-					"linux,input-no-autorepeat");
-	wakeup = of_property_read_bool(pdev->dev.of_node,
-					"linux,keypad-wakeup");
+	repeat = !of_property_read_bool(np, "linux,input-no-autorepeat");
+
+	wakeup = of_property_read_bool(np, "wakeup-source") ||
+		 /* legacy name */
+		 of_property_read_bool(np, "linux,keypad-wakeup");
 
 	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
 	if (!kp)
-- 
2.4.3.573.g4eafbef

Re: [PATCH 3/6] Input: pmic8xxx-keypad - change name of wakeup property

[Stephen Boyd]

On 07/17/2015 05:36 PM, Dmitry Torokhov wrote:
> Wakeup property of device is not Linux-specific, it describes intended
> system behavior regardless of the OS being used. Therefore let's drop
> "linux," prefix, and, while at it, use the same name as I2C bus does:
> "wakeup-source".
>
> We keep parsing old name to keep compatibility with old DTSes.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Acked-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 6/6] Input: tc3589x-keypad - change name of wakeup property

[Dmitry Torokhov]

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 Documentation/devicetree/bindings/mfd/tc3589x.txt | 4 ++--
 drivers/input/keyboard/tc3589x-keypad.c           | 5 ++++-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 6fcedba..37bf7f1 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -55,7 +55,7 @@ Optional nodes:
  - linux,keymap: the definition can be found in
    bindings/input/matrix-keymap.txt
  - linux,no-autorepeat: do no enable autorepeat feature.
- - linux,wakeup: use any event on keypad as wakeup event.
+ - wakeup-source: use any event on keypad as wakeup event.
 
 Example:
 
@@ -84,7 +84,6 @@ tc35893@44 {
 		keypad,num-columns = <8>;
 		keypad,num-rows = <8>;
 		linux,no-autorepeat;
-		linux,wakeup;
 		linux,keymap = <0x0301006b
 				0x04010066
 				0x06040072
@@ -103,5 +102,6 @@ tc35893@44 {
 				0x01030039
 				0x07060069
 				0x050500d9>;
+		wakeup-source;
 	};
 };
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 31c606a..565805e 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -352,7 +352,10 @@ tc3589x_keypad_of_probe(struct device *dev)
 	}
 
 	plat->no_autorepeat = of_property_read_bool(np, "linux,no-autorepeat");
-	plat->enable_wakeup = of_property_read_bool(np, "linux,wakeup");
+
+	plat->enable_wakeup = of_property_read_bool(np, "wakeup-source") ||
+			      /* legacy name */
+			      of_property_read_bool(np, "linux,wakeup");
 
 	/* The custom delay format is ms/16 */
 	of_property_read_u32(np, "debounce-delay-ms", &debounce_ms);
-- 
2.4.3.573.g4eafbef

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 6/6] Input: tc3589x-keypad - change name of wakeup property

[Dmitry Torokhov]

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/mfd/tc3589x.txt | 4 ++--
 drivers/input/keyboard/tc3589x-keypad.c           | 5 ++++-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 6fcedba..37bf7f1 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -55,7 +55,7 @@ Optional nodes:
  - linux,keymap: the definition can be found in
    bindings/input/matrix-keymap.txt
  - linux,no-autorepeat: do no enable autorepeat feature.
- - linux,wakeup: use any event on keypad as wakeup event.
+ - wakeup-source: use any event on keypad as wakeup event.
 
 Example:
 
@@ -84,7 +84,6 @@ tc35893@44 {
 		keypad,num-columns = <8>;
 		keypad,num-rows = <8>;
 		linux,no-autorepeat;
-		linux,wakeup;
 		linux,keymap = <0x0301006b
 				0x04010066
 				0x06040072
@@ -103,5 +102,6 @@ tc35893@44 {
 				0x01030039
 				0x07060069
 				0x050500d9>;
+		wakeup-source;
 	};
 };
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 31c606a..565805e 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -352,7 +352,10 @@ tc3589x_keypad_of_probe(struct device *dev)
 	}
 
 	plat->no_autorepeat = of_property_read_bool(np, "linux,no-autorepeat");
-	plat->enable_wakeup = of_property_read_bool(np, "linux,wakeup");
+
+	plat->enable_wakeup = of_property_read_bool(np, "wakeup-source") ||
+			      /* legacy name */
+			      of_property_read_bool(np, "linux,wakeup");
 
 	/* The custom delay format is ms/16 */
 	of_property_read_u32(np, "debounce-delay-ms", &debounce_ms);
-- 
2.4.3.573.g4eafbef

Re: [PATCH 6/6] Input: tc3589x-keypad - change name of wakeup property

[Linus Walleij]

On Sat, Jul 18, 2015 at 2:36 AM, Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:

> Wakeup property of device is not Linux-specific, it describes intended
> system behavior regardless of the OS being used. Therefore let's drop
> "linux," prefix, and, while at it, use the same name as I2C bus does:
> "wakeup-source".
>
> We keep parsing old name to keep compatibility with old DTSes.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH 4/6] Input: gpio_keys[_polled] - change name of wakeup property

[Dmitry Torokhov]

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/input/gpio-keys-polled.txt | 2 +-
 Documentation/devicetree/bindings/input/gpio-keys.txt        | 2 +-
 drivers/input/keyboard/gpio_keys.c                           | 4 +++-
 drivers/input/keyboard/gpio_keys_polled.c                    | 5 ++++-
 4 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
index 313abef..5b91f5a 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
@@ -20,7 +20,7 @@ Optional subnode-properties:
 	  If not specified defaults to <1> == EV_KEY.
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
-	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- wakeup-source: Boolean, button can wake-up the system.
 
 Example nodes:
 
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index 44b7057..072bf75 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -23,7 +23,7 @@ Optional subnode-properties:
 	  If not specified defaults to <1> == EV_KEY.
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
-	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- wakeup-source: Boolean, button can wake-up the system.
 	- linux,can-disable: Boolean, indicates that button is connected
 	  to dedicated (not shared) interrupt which can be disabled to
 	  suppress events from the button.
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index ddf4045..1df4507 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -655,7 +655,9 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 		if (of_property_read_u32(pp, "linux,input-type", &button->type))
 			button->type = EV_KEY;
 
-		button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
+		button->wakeup = of_property_read_bool(pp, "wakeup-source") ||
+				 /* legacy name */
+				 of_property_read_bool(pp, "gpio-key,wakeup");
 
 		button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
 
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index 097d721..5a0c999 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -152,7 +152,10 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 					     &button->type))
 			button->type = EV_KEY;
 
-		button->wakeup = fwnode_property_present(child, "gpio-key,wakeup");
+		button->wakeup =
+			fwnode_property_read_bool(child, "wakeup-source") ||
+			/* legacy name */
+			fwnode_property_read_bool(child, "gpio-key,wakeup");
 
 		if (fwnode_property_read_u32(child, "debounce-interval",
 					     &button->debounce_interval))
-- 
2.4.3.573.g4eafbef

Re: [PATCH 4/6] Input: gpio_keys[_polled] - change name of wakeup property

[Linus Walleij]

On Sat, Jul 18, 2015 at 2:36 AM, Dmitry Torokhov
<dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> Wakeup property of device is not Linux-specific, it describes intended
> system behavior regardless of the OS being used. Therefore let's drop
> "linux," prefix, and, while at it, use the same name as I2C bus does:
> "wakeup-source".
>
> We keep parsing old name to keep compatibility with old DTSes.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

This looks good.
Reviewed-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 4/6] Input: gpio_keys[_polled] - change name of wakeup property

[Linus Walleij]

On Sat, Jul 18, 2015 at 2:36 AM, Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:

> Wakeup property of device is not Linux-specific, it describes intended
> system behavior regardless of the OS being used. Therefore let's drop
> "linux," prefix, and, while at it, use the same name as I2C bus does:
> "wakeup-source".
>
> We keep parsing old name to keep compatibility with old DTSes.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This looks good.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH 5/6] Input: samsung-keypad - change name of wakeup property

[Dmitry Torokhov]

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/input/samsung-keypad.txt | 4 +++-
 drivers/input/keyboard/samsung-keypad.c                    | 6 ++++--
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 942d071..863e77f 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -36,9 +36,11 @@ Required Board Specific Properties:
 - pinctrl-0: Should specify pin control groups used for this controller.
 - pinctrl-names: Should contain only one value - "default".
 
+Optional Properties:
+- wakeup-source: use any event on keypad as wakeup event.
+
 Optional Properties specific to linux:
 - linux,keypad-no-autorepeat: do no enable autorepeat feature.
-- linux,keypad-wakeup: use any event on keypad as wakeup event.
 
 
 Example:
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 43e48dac..dc05f39 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -299,8 +299,10 @@ samsung_keypad_parse_dt(struct device *dev)
 	if (of_get_property(np, "linux,input-no-autorepeat", NULL))
 		pdata->no_autorepeat = true;
 
-	if (of_get_property(np, "linux,input-wakeup", NULL))
-		pdata->wakeup = true;
+	pdata->wakeup = of_property_read_bool(pp, "wakeup-source") ||
+			/* legacy name */
+			of_property_read_bool(pp, "linux,input-wakeup");
+
 
 	return pdata;
 }
-- 
2.4.3.573.g4eafbef