All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes
Date: Thu, 23 Jul 2015 14:22:15 +0200	[thread overview]
Message-ID: <55B0DC77.5020600@denx.de> (raw)
In-Reply-To: <55A75340.80509@denx.de>

Hi Vikas,

On 16.07.2015 08:46, Stefan Roese wrote:
>>>> In addition can you please check the patch causing this instability on
>>>> socfpga. I don't like to bug you but to close this patchset, this info
>>>> & tests mentioned above seems to be required.
>>>
>>> Okay. I'll try to find some time this week to do some testing here.
>>> It seems
>>> that the other cadence patchset from you ([v4 00/10] spi:
>>> cadence_qspi: sram depth from DT & fix for FIFO width) is not pulled
>>> into
>>> mainline yet. To make it easier for me, could you perhaps publish a git
>>> repository that is based on current mainline. And has the mentioned
>>> above
>>> patch series included. And all the patches in the latest version that
>>> are
>>> currently causing these problems on SoCFPGA?
>>
>> The patchset was in u-boot-spi repository, yesterday pulled by Tom in
>> mainline. I will rebase the patchset in discussion
>> (spi: cadence_qspi: optimize & fix indirect rd-writes) on mainline
>> master & send the V2.
>>
>> Let me know if it is ok.
>
> Okay, I'll try to find some time later this week or next week for some
> tests.

I couldn't find the required time to  test these patches again yet. 
Sorry. And I'll leave for a short vacation tomorrow. So I won't be able 
to get to this issue before week 32.

Perhaps somebody else finds some time to look at this QSPI driver issue 
in the meantime

Thanks,
Stefan

  reply	other threads:[~2015-07-23 12:22 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-17  2:14 [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 1/7] spi: cadence_qspi: remove sram polling from flash read Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 2/7] spi: cadence_qspi: read can be independent of fifo width Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 3/7] spi: cadence_qspi: remove sram polling from flash write Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 4/7] spi: cadence_qspi: move trigger base configuration in init Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 5/7] spi: cadence_qspi: fix indirect read/write start address Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 6/7] spi: cadence_qspi: fix base trigger address & transfer " Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 7/7] spi: cadence_qspi: get fifo width from device tree Vikas Manocha
2015-06-18 12:02 ` [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes Stefan Roese
2015-06-18 18:05   ` Vikas MANOCHA
2015-06-19  6:16     ` Stefan Roese
2015-06-19 21:38       ` Vikas MANOCHA
2015-06-22  8:34         ` Stefan Roese
2015-06-22 23:31           ` Vikas MANOCHA
2015-06-23 14:36             ` Graham Moore
2015-06-23 14:51               ` Vikas MANOCHA
2015-07-02 17:50               ` Vikas MANOCHA
2015-07-06 17:56                 ` Graham Moore
2015-07-06 18:19                   ` Vikas MANOCHA
2015-07-01 16:24           ` Vikas MANOCHA
2015-07-09  1:29           ` Vikas MANOCHA
2015-07-13  9:00             ` Stefan Roese
2015-07-15 21:14               ` Vikas MANOCHA
2015-07-16  6:46                 ` Stefan Roese
2015-07-23 12:22                   ` Stefan Roese [this message]
2015-08-11 21:19                     ` vikasm
2015-08-12 11:36                       ` Stefan Roese
2015-08-12 12:01                         ` Jagan Teki
2015-08-12 17:52                           ` vikasm
2015-08-12 20:22                             ` Marek Vasut
2015-08-13  0:16                               ` vikasm
2015-08-13  0:26                                 ` Marek Vasut
2015-08-13  0:36                                   ` vikasm
2015-08-13  2:15                                     ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55B0DC77.5020600@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.