* raspberry Pi core-image-sato
@ 2015-07-23 14:37 Edward Vidal
2015-07-23 14:57 ` ***SPAM*** " Herve Jourdain
2015-07-23 14:57 ` Gary Thomas
0 siblings, 2 replies; 9+ messages in thread
From: Edward Vidal @ 2015-07-23 14:37 UTC (permalink / raw)
To: yocto@yoctoproject.org
[-- Attachment #1.1: Type: text/plain, Size: 689 bytes --]
Hi Gary,Is this the log that you need?I also ran the bitbake -DD core-image-sato and have the log for that run.
| WARNING: exit code 1 from a shell command.
| ERROR: oe_runconf failed
| ERROR: Function failed: do_configure (log file is located at /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.9672)
ERROR: Task 4597 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'
Let me know what I can provide.Thanks for the help Regards,Edward Vidal Jr.
e-mail develone@sbcglobal.net
915-595-1613
[-- Attachment #1.2: Type: text/html, Size: 1575 bytes --]
[-- Attachment #2: log.do_configure.9672 --]
[-- Type: application/octet-stream, Size: 22891 bytes --]
DEBUG: Executing python function sysroot_cleansstate
DEBUG: Python function sysroot_cleansstate finished
DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
DEBUG: Executing shell function autotools_preconfigure
DEBUG: Shell function autotools_preconfigure finished
DEBUG: Executing python function autotools_copy_aclocals
DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
DEBUG: Python function autotools_copy_aclocals finished
DEBUG: Executing shell function do_configure
automake (GNU automake) 1.15
Copyright (C) 2014 Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by Tom Tromey <tromey@redhat.com>
and Alexandre Duret-Lutz <adl@gnu.org>.
AUTOV is 1
NOTE: Executing ACLOCAL="aclocal --system-acdir=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/build/aclocal-copy/" autoreconf --verbose --install --force --exclude=autopoint
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --system-acdir=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/build/aclocal-copy/ --force
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
autoreconf: running: /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf --force
autoreconf: running: /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/x86_64-linux/usr/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:41: installing './compile'
configure.ac:32: installing './missing'
src/Makefile.am: installing './depcomp'
autoreconf: running: gnu-configize
autoreconf: Leaving directory `.'
NOTE: Running /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/git/configure --build=x86_64-linux --host=arm-poky-linux-gnueabi --target=arm-poky-linux-gnueabi --prefix=/usr --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib/libepoxy --datadir=/usr/share --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var --libdir=/usr/lib --includedir=/usr/include --oldincludedir=/usr/include --infodir=/usr/share/info --mandir=/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 --enable-glx
configure: loading site script /home/vidal/wkg/yocto/RaspberryPi2/poky/meta/site/endian-little
configure: loading site script /home/vidal/wkg/yocto/RaspberryPi2/poky/meta/site/arm-common
configure: loading site script /home/vidal/wkg/yocto/RaspberryPi2/poky/meta/site/arm-32
configure: loading site script /home/vidal/wkg/yocto/RaspberryPi2/poky/meta/site/common-linux
configure: loading site script /home/vidal/wkg/yocto/RaspberryPi2/poky/meta/site/common-glibc
configure: loading site script /home/vidal/wkg/yocto/RaspberryPi2/poky/meta/site/arm-linux
configure: loading site script /home/vidal/wkg/yocto/RaspberryPi2/poky/meta/site/common
configure: loading site script /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/build/aclocal-copy/glibc_config
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for arm-poky-linux-gnueabi-strip... arm-poky-linux-gnueabi-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for style of include used by make... GNU
checking for arm-poky-linux-gnueabi-gcc... arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 accepts -g... yes
checking for arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 option to accept ISO C89... none needed
checking whether arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 understands -c and -o together... yes
checking dependency style of arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2... none
checking for arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 option to accept ISO C99... -std=gnu99
checking how to run the C preprocessor... arm-poky-linux-gnueabi-gcc -E --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking whether __clang__ is declared... no
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking for arm-poky-linux-gnueabi-pkg-config... no
checking for pkg-config... /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/x86_64-linux/usr/bin/pkg-config
configure: WARNING: using cross tools not prefixed with host triplet
checking pkg-config is at least version 0.9.0... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... arm-poky-linux-gnueabi
checking for a sed that does not truncate output... (cached) sed
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=unknown-warning-option... no
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=unused-command-line-argument... no
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wall... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wpointer-arith... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wmissing-declarations... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wformat=2... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wstrict-prototypes... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wmissing-prototypes... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wnested-externs... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wbad-function-cast... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wold-style-definition... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wdeclaration-after-statement... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wunused... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wuninitialized... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wshadow... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wmissing-noreturn... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wmissing-format-attribute... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wredundant-decls... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wlogical-op... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=implicit... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=nonnull... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=init-self... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=main... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=missing-braces... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=sequence-point... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=return-type... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=trigraphs... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=array-bounds... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=write-strings... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=address... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=int-to-pointer-cast... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=pointer-to-int-cast... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -pedantic... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking for python3... no
checking for python2... python2
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) sed
checking for fgrep... /bin/grep -F
checking for ld used by arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99... arm-poky-linux-gnueabi-ld --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2
checking if the linker (arm-poky-linux-gnueabi-ld --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 ) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... arm-poky-linux-gnueabi-nm
checking the name lister (arm-poky-linux-gnueabi-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to arm-poky-linux-gnueabi format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for arm-poky-linux-gnueabi-ld --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 option to reload object files... -r
checking for arm-poky-linux-gnueabi-objdump... arm-poky-linux-gnueabi-objdump
checking how to recognize dependent libraries... pass_all
checking for arm-poky-linux-gnueabi-dlltool... dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for arm-poky-linux-gnueabi-ar... arm-poky-linux-gnueabi-ar
checking for archiver @FILE support... @
checking for arm-poky-linux-gnueabi-strip... (cached) arm-poky-linux-gnueabi-strip
checking for arm-poky-linux-gnueabi-ranlib... arm-poky-linux-gnueabi-ranlib
checking command to parse arm-poky-linux-gnueabi-nm output from arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 object... ok
checking for sysroot... /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for arm-poky-linux-gnueabi-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... (cached) yes
checking for objdir... .libs
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -fno-rtti -fno-exceptions... no
checking for arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 option to produce PIC... -fPIC -DPIC
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 PIC flag -fPIC -DPIC works... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 static flag -static works... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -c -o file.o... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -c -o file.o... (cached) yes
checking whether the arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 linker (arm-poky-linux-gnueabi-ld --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 ) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking KHR/khrplatform.h usability... yes
checking KHR/khrplatform.h presence... yes
checking for KHR/khrplatform.h... yes
checking if arm-poky-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon-vfpv4 -mtune=cortex-a7 --sysroot=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2 -std=gnu99 supports -Wno-int-conversion... yes
checking for X11... yes
checking for EGL... no
configure: error: Package requirements (egl) were not met:
No package 'egl' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables EGL_CFLAGS
and EGL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
Configure failed. The contents of all config.log files follows to aid debugging
WARNING: exit code 1 from a shell command.
ERROR: oe_runconf failed
ERROR: Function failed: do_configure (log file is located at /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.9672)
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: ***SPAM*** raspberry Pi core-image-sato
2015-07-23 14:37 raspberry Pi core-image-sato Edward Vidal
@ 2015-07-23 14:57 ` Herve Jourdain
2015-07-23 14:57 ` Gary Thomas
1 sibling, 0 replies; 9+ messages in thread
From: Herve Jourdain @ 2015-07-23 14:57 UTC (permalink / raw)
To: 'Edward Vidal', yocto
[-- Attachment #1: Type: text/plain, Size: 1496 bytes --]
Hi,
Not sure if it’s the case, because the config.log might give more details, but maybe you can try adding the following to your recipe :
EXTRA_OECONF += “-I${STAGING_DIR_TARGET}/usr/include/interface/vcos/pthreads/ \
-I${STAGING_DIR_TARGET}/usr/include/interface/vmcs_host/linux/"
I needed that to compile other packages that were using EGL.
Once again, just a hint, no warranty whatsoever…
BR,
Hervé
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Edward Vidal
Sent: jeudi 23 juillet 2015 16:38
To: yocto@yoctoproject.org
Subject: ***SPAM*** [yocto] raspberry Pi core-image-sato
Hi Gary,
Is this the log that you need?
I also ran the bitbake -DD core-image-sato and have the log for that run.
| WARNING: exit code 1 from a shell command.
| ERROR: oe_runconf failed
| ERROR: Function failed: do_configure (log file is located at /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.9672)
ERROR: Task 4597 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'
Let me know what I can provide.
Thanks for the help
Regards,
Edward Vidal Jr.
e-mail develone@sbcglobal.net <mailto:develone@sbcglobal.net>
915-595-1613
[-- Attachment #2: Type: text/html, Size: 7256 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: raspberry Pi core-image-sato
2015-07-23 14:37 raspberry Pi core-image-sato Edward Vidal
2015-07-23 14:57 ` ***SPAM*** " Herve Jourdain
@ 2015-07-23 14:57 ` Gary Thomas
1 sibling, 0 replies; 9+ messages in thread
From: Gary Thomas @ 2015-07-23 14:57 UTC (permalink / raw)
To: yocto
On 2015-07-23 08:37, Edward Vidal wrote:
> Hi Gary,
> Is this the log that you need?
> I also ran the bitbake -DD core-image-sato and have the log for that run.
>
> | WARNING: exit code 1 from a shell command.
> | ERROR: oe_runconf failed
> | ERROR: Function failed: do_configure (log file is located at
> /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.9672)
> ERROR: Task 4597 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'
Did you look at the error? It's the same as you had yesterday:
checking for EGL... no
configure: error: Package requirements (egl) were not met:
No package 'egl' found
Did you perhaps remove those PREFERRED_PROVIDER lines from local.conf?
You need these lines for this to work:
PREFERRED_PROVIDER_virtual/egl ?= "vc-graphics-hardfp"
PREFERRED_PROVIDER_virtual/libgles2 ?= "vc-graphics-hardfp"
> Let me know what I can provide.
Send your _complete_ local.conf and bblayers.conf
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <mailman.5858.1437611001.2787.yocto@yoctoproject.org>]
* raspberry Pi core-image-sato
[not found] <mailman.5858.1437611001.2787.yocto@yoctoproject.org>
@ 2015-07-23 12:35 ` Edward Vidal
2015-07-23 12:49 ` Gary Thomas
0 siblings, 1 reply; 9+ messages in thread
From: Edward Vidal @ 2015-07-23 12:35 UTC (permalink / raw)
To: yocto@yoctoproject.org
[-- Attachment #1: Type: text/plain, Size: 12370 bytes --]
Hi Gary,
Thanks for the help.
I executed the command
"bitbake userland -c cleansstate"
This completed successful.
5: userland-git-r5 do_compile (pid 17332)
Did not know how to apply the patch.
I tried in poky folder
patch --dry-run < ~/Downloads/attachment-0001.bin
patch < ~/Downloads/attachment-0001.bin
git apply --stat ~/Downloads/attachment-0001.bin
Could not get the patch so I did manually.
git diff
diff --git a/meta-yocto/conf/distro/poky.conf b/meta-yocto/conf/distro/poky.conf
index e3d3c78..238b553 100644
--- a/meta-yocto/conf/distro/poky.conf
+++ b/meta-yocto/conf/distro/poky.conf
@@ -72,6 +72,7 @@ CONNECTIVITY_CHECK_URIS ?= " \
SANITY_TESTED_DISTROS ?= " \
poky-1.7 \n \
poky-1.8 \n \
+ Ubuntu-12.04 \n \
Ubuntu-14.04 \n \
Ubuntu-14.10 \n \
Ubuntu-15.04 \n \
diff --git a/meta/recipes-graphics/libepoxy/libepoxy_git.bb b/meta/recipes-graph
index 9816257..0330a7b 100644
--- a/meta/recipes-graphics/libepoxy/libepoxy_git.bb
+++ b/meta/recipes-graphics/libepoxy/libepoxy_git.bb
@@ -16,7 +16,7 @@ PV = "1.2+git${SRCPV}"
S = "${WORKDIR}/git"
-inherit autotools pkgconfig
+inherit autotools pkgconfig python3native
DEPENDS = "util-macros virtual/egl"
bitbake core-image-sato failed with same error.
| WARNING: exit code 1 from a shell command.
| ERROR: oe_runconf failed
| ERROR: Function failed: do_configure (log file is located at /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.27821)
ERROR: Task 4597 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'
Waiting for 1 running tasks to finish:
These are the layers that I am using.
meta-yocto-bsp = "fido:0f8d89ce66cfffccc9911d6c61470a585173b79d"
meta-raspberrypi = "fido:7457bf182c8fd550ec877ecd786a3edd16e65495"
Do these need to upated I got them on the 20th of this month.
Thanks appreciate all the help. Edward Vidal Jr.
e-mail develone@sbcglobal.net
915-595-1613
On Wednesday, July 22, 2015 6:24 PM, "yocto-request@yoctoproject.org" <yocto-request@yoctoproject.org> wrote:
Send yocto mailing list submissions to
yocto@yoctoproject.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.yoctoproject.org/listinfo/yocto
or, via email, send a message with subject or body 'help' to
yocto-request@yoctoproject.org
You can reach the person managing the list at
yocto-owner@yoctoproject.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of yocto digest..."
Today's Topics:
1. [meta-raspberrypi][PATCH 1/1] packagegroup-rpi-test: Add
pi-blaster (Petter Mab?cker)
2. [meta-raspberrypi][PATCH 0/1] packagegroup-rpi-test: Add
pi-blaster (Petter Mab?cker)
3. VMDK image not booting (Daniel Kuhne)
4. Re: [oe] Bug in Open CV receipt (Otavio Salvador)
5. Re: Exporting kernel header from patch (Gamma.Dean@Emerson.com)
6. raspberry Pi core-image-sato (Edward Vidal)
7. Re: raspberry Pi core-image-sato (Gary Thomas)
----------------------------------------------------------------------
Message: 1
Date: Wed, 22 Jul 2015 23:29:52 +0200
From: Petter Mab?cker <petter@technux.se>
To: yocto@yoctoproject.org
Subject: [yocto] [meta-raspberrypi][PATCH 1/1] packagegroup-rpi-test:
Add pi-blaster
Message-ID:
<7c508bdaa77ecacf897f5470c85767ed6702fd6e.1437600372.git.petter@technux.se>
Content-Type: text/plain; charset=UTF-8
Ensure that pi-blaster is built and included by default when building
'rpi-test-image'.
Signed-off-by: Petter Mab?cker <petter@technux.se>
---
recipes-core/packagegroups/packagegroup-rpi-test.bb | 1 +
1 file changed, 1 insertion(+)
diff --git a/recipes-core/packagegroups/packagegroup-rpi-test.bb b/recipes-core/packagegroups/packagegroup-rpi-test.bb
index e16e79e..d8d311f 100644
--- a/recipes-core/packagegroups/packagegroup-rpi-test.bb
+++ b/recipes-core/packagegroups/packagegroup-rpi-test.bb
@@ -10,6 +10,7 @@ RDEPENDS_${PN} = "\
wiringpi \
rpio \
rpi-gpio \
+ pi-blaster \
"
RRECOMMENDS_${PN} = "\
--
1.9.1
------------------------------
Message: 2
Date: Wed, 22 Jul 2015 23:29:51 +0200
From: Petter Mab?cker <petter@technux.se>
To: yocto@yoctoproject.org
Subject: [yocto] [meta-raspberrypi][PATCH 0/1] packagegroup-rpi-test:
Add pi-blaster
Message-ID: <cover.1437600372.git.petter@technux.se>
Content-Type: text/plain; charset=UTF-8
The following changes since commit 7457bf182c8fd550ec877ecd786a3edd16e65495:
wiringpi: Bump SRCREV (2015-07-19 14:53:27 +0200)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib petmab/rpi_minor_fix
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_minor_fix
Petter Mab?cker (1):
packagegroup-rpi-test: Add pi-blaster
recipes-core/packagegroups/packagegroup-rpi-test.bb | 1 +
1 file changed, 1 insertion(+)
--
1.9.1
------------------------------
Message: 3
Date: Wed, 22 Jul 2015 07:33:20 +0000
From: Daniel Kuhne <dakuit00@gmail.com>
To: yocto@yoctoproject.org
Subject: [yocto] VMDK image not booting
Message-ID:
<CABEeoJV2CXbGtu1UnFZGtg-Snxj7+J9_RBb32EDzhq=LdH5D_Q@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hello,
my vmdk image is not booting into systemd. But my iso image does.
It is similar to
https://lists.yoctoproject.org/pipermail/yocto/2014-August/021218.html
I use fido with meta-intel.
Cheers,
Daniel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150722/414c21a0/attachment-0001.html>
------------------------------
Message: 4
Date: Wed, 22 Jul 2015 09:35:20 -0300
From: Otavio Salvador <otavio.salvador@ossystems.com.br>
To: OpenEmbedded Devel List
<openembedded-devel@lists.openembedded.org>
Cc: "yocto@yoctoproject.org" <yocto@yoctoproject.org>
Subject: Re: [yocto] [oe] Bug in Open CV receipt
Message-ID:
<CAP9ODKq6U0udqPvjgs1WmHNFy693O6h5Qt+hHFwnYo5nbpH1kQ@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
On Tue, Jul 21, 2015 at 11:57 AM, Victor Rodriguez <vm.rod25@gmail.com> wrote:
> Few weeks ago I was having some problems with open CV receipt. In the
> begining I toght I was adding opencv tro my core-image-minimal-xfce
> just with this:
>
> IMAGE_INSTALL_append = " gcc gcc-dev openssh php mariadb opencv"
>
> Now after booting the image I realize that none of the libraries for
> open stack were added to my image
>
> What I had to do was the following:
>
>
> IMAGE_INSTALL_append = " libopencv-core-dev libopencv-highgui-dev
> libopencv-imgproc-dev libopencv-objdetect-dev libopencv-ml-dev
> opencv-staticdev python-opencv"
>
> Even last night when one of the opencv developers ask me for python
> opencv I had to add the last part python-opencv. That is not cool at
> all . If I add opencv in the beginning I assume we are more than cool
> with that and yocto will add all the packages . Unless I am doing
> something wrong, in taht case I am more than happy to get the
> feedback.
>
> Thanks a lot for all the help . If someone else can reproduce this bug
> I am more than happy to report it in bugzila (not sure the URL)
You should add the dev-pkgs and tools-sdk image features for the
image, not mangle it manually.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
------------------------------
Message: 5
Date: Wed, 22 Jul 2015 15:09:26 +0000
From: <Gamma.Dean@Emerson.com>
To: <yocto@yoctoproject.org>
Subject: Re: [yocto] Exporting kernel header from patch
Message-ID:
<5B6A9B05AFA9AC4FB94345D083806F144B2BF945@USSTLZ-PMSG016.emrsn.org>
Content-Type: text/plain; charset="us-ascii"
When using a shared sstate cache which has the previously built kernel it appears that STAGING_KERNEL_DIR does not get populated - in my case there is no tmp/work-shared directory at all. If I have modified the user space app to look there for a header is there some dependency I can add that will force STAGING_KERNEL_DIR to get built?
If not, perhaps the best answer is your other proposed method of just adding the header to an additional path in sysroot.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150722/f550ea3d/attachment-0001.html>
------------------------------
Message: 6
Date: Wed, 22 Jul 2015 22:16:50 +0000 (UTC)
From: Edward Vidal <develone@sbcglobal.net>
To: "yocto@yoctoproject.org" <yocto@yoctoproject.org>
Subject: [yocto] raspberry Pi core-image-sato
Message-ID:
<858020079.672977.1437603410191.JavaMail.yahoo@mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"
HiStill having errors with bitbake core-image-satoThis occurs at | checking for X11... yes
| checking for EGL... no
| configure: error: Package requirements (egl) were not met:
ERROR: Task 4856 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'I tried adding /conf/machine/raspberrypi2.conf which I found on the internet.+PREFERRED_PROVIDER_virtual/egl ?= "vc-graphics-hardfp"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "vc-graphics-hardfp"This caused several more errors.Any and all help is appreciated. ?Edward Vidal Jr.
e-mail develone@sbcglobal.net
915-595-1613
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150722/0edaf329/attachment-0001.html>
------------------------------
Message: 7
Date: Wed, 22 Jul 2015 18:23:18 -0600
From: Gary Thomas <gary@mlbassoc.com>
To: yocto@yoctoproject.org
Subject: Re: [yocto] raspberry Pi core-image-sato
Message-ID: <55B033F6.0@mlbassoc.com>
Content-Type: text/plain; charset="windows-1252"; Format="flowed"
On 2015-07-22 16:16, Edward Vidal wrote:
> Hi
> Still having errors with bitbake core-image-sato
You must have added something to your image - core-image-sato does
not include libepoxy by default.
> This occurs at
> | checking for X11... yes
> | checking for EGL... no
> | configure: error: Package requirements (egl) were not met:
> ERROR: Task 4856 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'
>
> I tried adding /conf/machine/raspberrypi2.conf which I found on the internet.
>
> +PREFERRED_PROVIDER_virtual/egl ?= "vc-graphics-hardfp"
> +PREFERRED_PROVIDER_virtual/libgles2 ?= "vc-graphics-hardfp"
>
> This caused several more errors.
Which you failed [again] to list :-(
> Any and all help is appreciated.
To get libepoxy to build:
% bitbake userland -c cleansstate
Then apply this patch which fixes a problem with libepoxy using
the wrong python3
After that, I got it to build for RaspberryPi-2
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-libepoxy-Use-native-python3.patch
Type: text/x-patch
Size: 927 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150722/ecba9929/attachment.bin>
------------------------------
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
End of yocto Digest, Vol 58, Issue 66
*************************************
[-- Attachment #2: Type: text/html, Size: 19706 bytes --]
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: raspberry Pi core-image-sato
2015-07-23 12:35 ` Edward Vidal
@ 2015-07-23 12:49 ` Gary Thomas
0 siblings, 0 replies; 9+ messages in thread
From: Gary Thomas @ 2015-07-23 12:49 UTC (permalink / raw)
To: yocto
On 2015-07-23 06:35, Edward Vidal wrote:
> bitbake core-image-sato failed with same error.
>
> | WARNING: exit code 1 from a shell command.
> | ERROR: oe_runconf failed
> | ERROR: Function failed: do_configure (log file is located at
> /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.27821)
> ERROR: Task 4597 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'
> Waiting for 1 running tasks to finish:
There's no way to comment further without seeing the log file
mentioned above :-(
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 9+ messages in thread
* raspberry Pi core-image-sato
@ 2015-07-22 22:16 Edward Vidal
2015-07-23 0:23 ` Gary Thomas
0 siblings, 1 reply; 9+ messages in thread
From: Edward Vidal @ 2015-07-22 22:16 UTC (permalink / raw)
To: yocto@yoctoproject.org
[-- Attachment #1: Type: text/plain, Size: 649 bytes --]
HiStill having errors with bitbake core-image-satoThis occurs at | checking for X11... yes
| checking for EGL... no
| configure: error: Package requirements (egl) were not met:
ERROR: Task 4856 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'I tried adding /conf/machine/raspberrypi2.conf which I found on the internet.+PREFERRED_PROVIDER_virtual/egl ?= "vc-graphics-hardfp"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "vc-graphics-hardfp"This caused several more errors.Any and all help is appreciated. Edward Vidal Jr.
e-mail develone@sbcglobal.net
915-595-1613
[-- Attachment #2: Type: text/html, Size: 1360 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: raspberry Pi core-image-sato
2015-07-22 22:16 Edward Vidal
@ 2015-07-23 0:23 ` Gary Thomas
2015-07-23 9:54 ` Burton, Ross
0 siblings, 1 reply; 9+ messages in thread
From: Gary Thomas @ 2015-07-23 0:23 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 1256 bytes --]
On 2015-07-22 16:16, Edward Vidal wrote:
> Hi
> Still having errors with bitbake core-image-sato
You must have added something to your image - core-image-sato does
not include libepoxy by default.
> This occurs at
> | checking for X11... yes
> | checking for EGL... no
> | configure: error: Package requirements (egl) were not met:
> ERROR: Task 4856 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'
>
> I tried adding /conf/machine/raspberrypi2.conf which I found on the internet.
>
> +PREFERRED_PROVIDER_virtual/egl ?= "vc-graphics-hardfp"
> +PREFERRED_PROVIDER_virtual/libgles2 ?= "vc-graphics-hardfp"
>
> This caused several more errors.
Which you failed [again] to list :-(
> Any and all help is appreciated.
To get libepoxy to build:
% bitbake userland -c cleansstate
Then apply this patch which fixes a problem with libepoxy using
the wrong python3
After that, I got it to build for RaspberryPi-2
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
[-- Attachment #2: 0001-libepoxy-Use-native-python3.patch --]
[-- Type: text/x-patch, Size: 955 bytes --]
From 17d22ee69a1568d1aaeaee26823ce6adbdf3062a Mon Sep 17 00:00:00 2001
From: Gary Thomas <gary@mlbassoc.com>
Date: Wed, 22 Jul 2015 18:20:30 -0600
Subject: [PATCH] libepoxy: Use native python3
This recipe needs python3. This patch arranges to use the bitbake-built
version, not the host version (which may be missing or not work...)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
---
meta/recipes-graphics/libepoxy/libepoxy_git.bb | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/meta/recipes-graphics/libepoxy/libepoxy_git.bb b/meta/recipes-graphics/libepoxy/libepoxy_git.bb
index 9816257..0330a7b 100644
--- a/meta/recipes-graphics/libepoxy/libepoxy_git.bb
+++ b/meta/recipes-graphics/libepoxy/libepoxy_git.bb
@@ -16,7 +16,7 @@ PV = "1.2+git${SRCPV}"
S = "${WORKDIR}/git"
-inherit autotools pkgconfig
+inherit autotools pkgconfig python3native
DEPENDS = "util-macros virtual/egl"
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: raspberry Pi core-image-sato
2015-07-23 0:23 ` Gary Thomas
@ 2015-07-23 9:54 ` Burton, Ross
2015-07-23 11:20 ` Gary Thomas
0 siblings, 1 reply; 9+ messages in thread
From: Burton, Ross @ 2015-07-23 9:54 UTC (permalink / raw)
To: Gary Thomas; +Cc: yocto@yoctoproject.org
[-- Attachment #1: Type: text/plain, Size: 348 bytes --]
On 23 July 2015 at 01:23, Gary Thomas <gary@mlbassoc.com> wrote:
> You must have added something to your image - core-image-sato does
> not include libepoxy by default.
>
"Well actually", if your using oe-core master and DISTRO_FEATURES includes
wayland then xserver-xorg will build the xwayland server, which requires
libepoxy.
Ross
[-- Attachment #2: Type: text/html, Size: 758 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: raspberry Pi core-image-sato
2015-07-23 9:54 ` Burton, Ross
@ 2015-07-23 11:20 ` Gary Thomas
0 siblings, 0 replies; 9+ messages in thread
From: Gary Thomas @ 2015-07-23 11:20 UTC (permalink / raw)
To: yocto
On 2015-07-23 03:54, Burton, Ross wrote:
>
> On 23 July 2015 at 01:23, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote:
>
> You must have added something to your image - core-image-sato does
> not include libepoxy by default.
>
>
> "Well actually", if your using oe-core master and DISTRO_FEATURES includes wayland then xserver-xorg will build the xwayland server, which requires libepoxy.
Good catch, but one never knows as the original poster has
not provided enough details :-(
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-07-23 14:57 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-07-23 14:37 raspberry Pi core-image-sato Edward Vidal
2015-07-23 14:57 ` ***SPAM*** " Herve Jourdain
2015-07-23 14:57 ` Gary Thomas
[not found] <mailman.5858.1437611001.2787.yocto@yoctoproject.org>
2015-07-23 12:35 ` Edward Vidal
2015-07-23 12:49 ` Gary Thomas
-- strict thread matches above, loose matches on Subject: below --
2015-07-22 22:16 Edward Vidal
2015-07-23 0:23 ` Gary Thomas
2015-07-23 9:54 ` Burton, Ross
2015-07-23 11:20 ` Gary Thomas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.