All of lore.kernel.org
 help / color / mirror / Atom feed
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees
Date: Tue, 28 Jul 2015 09:32:20 +0200	[thread overview]
Message-ID: <55B73004.2070401@atmel.com> (raw)
In-Reply-To: <1434959149-4067-2-git-send-email-alexandre.belloni@free-electrons.com>

Le 22/06/2015 09:45, Alexandre Belloni a ?crit :
> The ADC pinctrl is board specific, move it to the board device trees.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

To the series:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
>  arch/arm/boot/dts/at91-sama5d4_xplained.dts | 9 +++++++++
>  arch/arm/boot/dts/at91-sama5d4ek.dts        | 9 +++++++++
>  arch/arm/boot/dts/sama5d4.dtsi              | 9 ---------
>  3 files changed, 18 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index c740e1a2a3a5..50033760df93 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -123,6 +123,15 @@
>  			};
>  
>  			adc0: adc at fc034000 {
> +				pinctrl-names = "default";
> +				pinctrl-0 = <
> +					/* external trigger conflicts with USBA_VBUS */
> +					&pinctrl_adc0_ad0
> +					&pinctrl_adc0_ad1
> +					&pinctrl_adc0_ad2
> +					&pinctrl_adc0_ad3
> +					&pinctrl_adc0_ad4
> +					>;
>  				atmel,adc-vref = <3300>;
>  				status = "okay";
>  			};
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 89ef4a540db5..202891b4c1b7 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -99,6 +99,15 @@
>  			};
>  
>  			adc0: adc at fc034000 {
> +				pinctrl-names = "default";
> +				pinctrl-0 = <
> +					/* external trigger conflicts with USBA_VBUS */
> +					&pinctrl_adc0_ad0
> +					&pinctrl_adc0_ad1
> +					&pinctrl_adc0_ad2
> +					&pinctrl_adc0_ad3
> +					&pinctrl_adc0_ad4
> +					>;
>  				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
>  				atmel,adc-vref = <3300>;
>  				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
> diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
> index ca1e52989a29..04779fe1c70b 100644
> --- a/arch/arm/boot/dts/sama5d4.dtsi
> +++ b/arch/arm/boot/dts/sama5d4.dtsi
> @@ -1078,15 +1078,6 @@
>  				compatible = "atmel,at91sam9x5-adc";
>  				reg = <0xfc034000 0x100>;
>  				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
> -				pinctrl-names = "default";
> -				pinctrl-0 = <
> -					/* external trigger is conflict with USBA_VBUS */
> -					&pinctrl_adc0_ad0
> -					&pinctrl_adc0_ad1
> -					&pinctrl_adc0_ad2
> -					&pinctrl_adc0_ad3
> -					&pinctrl_adc0_ad4
> -					>;
>  				clocks = <&adc_clk>,
>  					 <&adc_op_clk>;
>  				clock-names = "adc_clk", "adc_op_clk";
> 


-- 
Nicolas Ferre

WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees
Date: Tue, 28 Jul 2015 09:32:20 +0200	[thread overview]
Message-ID: <55B73004.2070401@atmel.com> (raw)
In-Reply-To: <1434959149-4067-2-git-send-email-alexandre.belloni@free-electrons.com>

Le 22/06/2015 09:45, Alexandre Belloni a écrit :
> The ADC pinctrl is board specific, move it to the board device trees.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

To the series:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
>  arch/arm/boot/dts/at91-sama5d4_xplained.dts | 9 +++++++++
>  arch/arm/boot/dts/at91-sama5d4ek.dts        | 9 +++++++++
>  arch/arm/boot/dts/sama5d4.dtsi              | 9 ---------
>  3 files changed, 18 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index c740e1a2a3a5..50033760df93 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -123,6 +123,15 @@
>  			};
>  
>  			adc0: adc@fc034000 {
> +				pinctrl-names = "default";
> +				pinctrl-0 = <
> +					/* external trigger conflicts with USBA_VBUS */
> +					&pinctrl_adc0_ad0
> +					&pinctrl_adc0_ad1
> +					&pinctrl_adc0_ad2
> +					&pinctrl_adc0_ad3
> +					&pinctrl_adc0_ad4
> +					>;
>  				atmel,adc-vref = <3300>;
>  				status = "okay";
>  			};
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 89ef4a540db5..202891b4c1b7 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -99,6 +99,15 @@
>  			};
>  
>  			adc0: adc@fc034000 {
> +				pinctrl-names = "default";
> +				pinctrl-0 = <
> +					/* external trigger conflicts with USBA_VBUS */
> +					&pinctrl_adc0_ad0
> +					&pinctrl_adc0_ad1
> +					&pinctrl_adc0_ad2
> +					&pinctrl_adc0_ad3
> +					&pinctrl_adc0_ad4
> +					>;
>  				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
>  				atmel,adc-vref = <3300>;
>  				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
> diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
> index ca1e52989a29..04779fe1c70b 100644
> --- a/arch/arm/boot/dts/sama5d4.dtsi
> +++ b/arch/arm/boot/dts/sama5d4.dtsi
> @@ -1078,15 +1078,6 @@
>  				compatible = "atmel,at91sam9x5-adc";
>  				reg = <0xfc034000 0x100>;
>  				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
> -				pinctrl-names = "default";
> -				pinctrl-0 = <
> -					/* external trigger is conflict with USBA_VBUS */
> -					&pinctrl_adc0_ad0
> -					&pinctrl_adc0_ad1
> -					&pinctrl_adc0_ad2
> -					&pinctrl_adc0_ad3
> -					&pinctrl_adc0_ad4
> -					>;
>  				clocks = <&adc_clk>,
>  					 <&adc_op_clk>;
>  				clock-names = "adc_clk", "adc_op_clk";
> 


-- 
Nicolas Ferre

  reply	other threads:[~2015-07-28  7:32 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-22  7:45 [PATCH 1/2] ARM: at91/dt: sama5d4: fix external trigger property Alexandre Belloni
2015-06-22  7:45 ` Alexandre Belloni
2015-06-22  7:45 ` [PATCH 2/2] ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees Alexandre Belloni
2015-06-22  7:45   ` Alexandre Belloni
2015-07-28  7:32   ` Nicolas Ferre [this message]
2015-07-28  7:32     ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55B73004.2070401@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.