[PATCH v3 2/3] ARM: at91/dt: add basic dtsi for sama5d2 SoC

[nicolas.ferre@atmel.com (Nicolas Ferre)]

Le 30/07/2015 13:55, Nicolas Ferre a ?crit :
> From: Ludovic Desroches <ludovic.desroches@atmel.com>
> 
> Only the basic support for this new Atmel Cortex-A5 SoC. A subset of the
> peripherals is setup to allow booting.
> IRQ, clocks, USB, crypto, timers, rtc, ethernet, spi/i2c and
> uart/usart peripheral nodes are added.
> 
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> 
> Changes in v3:
> - remove sd/mmc nodes
> - remove generated clock nodes

Oh I forgot about this:
- corrected the DMA HW handler interfaces for SHA and AES thanks to Leilei!

Bye,

> 
> Changes in v2:
> - fix sdmmc clocks and memory range
> - add flexcom and audio Class D amplifier peripheral clock definitions
> - add qspi peripheral clock definitions
> - add more generated clock definitions
> - fix DMA definitions for crypto peripherals
> - add spi, i2c and rtc nodes
> 
>  arch/arm/boot/dts/sama5d2.dtsi | 925 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 925 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sama5d2.dtsi
> 
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> new file mode 100644
> index 000000000000..f39258fa3815
> --- /dev/null
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -0,0 +1,925 @@
> +/*
> + * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
> + *
> + *  Copyright (C) 2015 Atmel,
> + *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "skeleton.dtsi"
> +#include <dt-bindings/dma/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/at91.h>
> +
> +/ {
> +	model = "Atmel SAMA5D2 family SoC";
> +	compatible = "atmel,sama5d2";
> +	interrupt-parent = <&aic>;
> +
> +	aliases {
> +		serial0 = &uart1;
> +		serial1 = &uart3;
> +		tcb0 = &tcb0;
> +		tcb1 = &tcb1;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a5";
> +			reg = <0>;
> +			next-level-cache = <&L2>;
> +		};
> +	};
> +
> +	memory {
> +		reg = <0x20000000 0x20000000>;
> +	};
> +
> +	clocks {
> +		slow_xtal: slow_xtal {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <0>;
> +		};
> +
> +		main_xtal: main_xtal {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <0>;
> +		};
> +
> +		adc_op_clk: adc_op_clk{
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <1000000>;
> +		};
> +	};
> +
> +	ns_sram: sram at 00200000 {
> +		compatible = "mmio-sram";
> +		reg = <0x00200000 0x20000>;
> +	};
> +
> +	ahb {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		usb0: gadget at 00300000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "atmel,sama5d3-udc";
> +			reg = <0x00300000 0x100000
> +			       0xfc02c000 0x400>;
> +			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
> +			clocks = <&udphs_clk>, <&utmi>;
> +			clock-names = "pclk", "hclk";
> +			status = "disabled";
> +
> +			ep0 {
> +				reg = <0>;
> +				atmel,fifo-size = <64>;
> +				atmel,nb-banks = <1>;
> +			};
> +
> +			ep1 {
> +				reg = <1>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <3>;
> +				atmel,can-dma;
> +				atmel,can-isoc;
> +			};
> +
> +			ep2 {
> +				reg = <2>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <3>;
> +				atmel,can-dma;
> +				atmel,can-isoc;
> +			};
> +
> +			ep3 {
> +				reg = <3>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-dma;
> +				atmel,can-isoc;
> +			};
> +
> +			ep4 {
> +				reg = <4>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-dma;
> +				atmel,can-isoc;
> +			};
> +
> +			ep5 {
> +				reg = <5>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-dma;
> +				atmel,can-isoc;
> +			};
> +
> +			ep6 {
> +				reg = <6>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-dma;
> +				atmel,can-isoc;
> +			};
> +
> +			ep7 {
> +				reg = <7>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-dma;
> +				atmel,can-isoc;
> +			};
> +
> +			ep8 {
> +				reg = <8>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-isoc;
> +			};
> +
> +			ep9 {
> +				reg = <9>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-isoc;
> +			};
> +
> +			ep10 {
> +				reg = <10>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-isoc;
> +			};
> +
> +			ep11 {
> +				reg = <11>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-isoc;
> +			};
> +
> +			ep12 {
> +				reg = <12>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-isoc;
> +			};
> +
> +			ep13 {
> +				reg = <13>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-isoc;
> +			};
> +
> +			ep14 {
> +				reg = <14>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-isoc;
> +			};
> +
> +			ep15 {
> +				reg = <15>;
> +				atmel,fifo-size = <1024>;
> +				atmel,nb-banks = <2>;
> +				atmel,can-isoc;
> +			};
> +		};
> +
> +		usb1: ohci at 00400000 {
> +			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
> +			reg = <0x00400000 0x100000>;
> +			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
> +			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
> +			clock-names = "ohci_clk", "hclk", "uhpck";
> +			status = "disabled";
> +		};
> +
> +		usb2: ehci at 00500000 {
> +			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
> +			reg = <0x00500000 0x100000>;
> +			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
> +			clocks = <&utmi>, <&uhphs_clk>;
> +			clock-names = "usb_clk", "ehci_clk";
> +			status = "disabled";
> +		};
> +
> +		L2: cache-controller at 00a00000 {
> +			compatible = "arm,pl310-cache";
> +			reg = <0x00a00000 0x1000>;
> +			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
> +			cache-unified;
> +			cache-level = <2>;
> +		};
> +
> +		apb {
> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			ramc0: ramc at f000c000 {
> +				compatible = "atmel,sama5d3-ddramc";
> +				reg = <0xf000c000 0x200>;
> +				clocks = <&ddrck>, <&mpddr_clk>;
> +				clock-names = "ddrck", "mpddr";
> +			};
> +
> +			dma0: dma-controller at f0010000 {
> +				compatible = "atmel,sama5d4-dma";
> +				reg = <0xf0010000 0x1000>;
> +				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
> +				#dma-cells = <1>;
> +				clocks = <&dma0_clk>;
> +				clock-names = "dma_clk";
> +			};
> +
> +			pmc: pmc at f0014000 {
> +				compatible = "atmel,sama5d2-pmc";
> +				reg = <0xf0014000 0x160>;
> +				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
> +				interrupt-controller;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				#interrupt-cells = <1>;
> +
> +				main_rc_osc: main_rc_osc {
> +					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
> +					#clock-cells = <0>;
> +					interrupt-parent = <&pmc>;
> +					interrupts = <AT91_PMC_MOSCRCS>;
> +					clock-frequency = <12000000>;
> +					clock-accuracy = <100000000>;
> +				};
> +
> +				main_osc: main_osc {
> +					compatible = "atmel,at91rm9200-clk-main-osc";
> +					#clock-cells = <0>;
> +					interrupt-parent = <&pmc>;
> +					interrupts = <AT91_PMC_MOSCS>;
> +					clocks = <&main_xtal>;
> +				};
> +
> +				main: mainck {
> +					compatible = "atmel,at91sam9x5-clk-main";
> +					#clock-cells = <0>;
> +					interrupt-parent = <&pmc>;
> +					interrupts = <AT91_PMC_MOSCSELS>;
> +					clocks = <&main_rc_osc &main_osc>;
> +				};
> +
> +				plla: pllack {
> +					compatible = "atmel,sama5d3-clk-pll";
> +					#clock-cells = <0>;
> +					interrupt-parent = <&pmc>;
> +					interrupts = <AT91_PMC_LOCKA>;
> +					clocks = <&main>;
> +					reg = <0>;
> +					atmel,clk-input-range = <12000000 12000000>;
> +					#atmel,pll-clk-output-range-cells = <4>;
> +					atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
> +				};
> +
> +				plladiv: plladivck {
> +					compatible = "atmel,at91sam9x5-clk-plldiv";
> +					#clock-cells = <0>;
> +					clocks = <&plla>;
> +				};
> +
> +				utmi: utmick {
> +					compatible = "atmel,at91sam9x5-clk-utmi";
> +					#clock-cells = <0>;
> +					interrupt-parent = <&pmc>;
> +					interrupts = <AT91_PMC_LOCKU>;
> +					clocks = <&main>;
> +				};
> +
> +				mck: masterck {
> +					compatible = "atmel,at91sam9x5-clk-master";
> +					#clock-cells = <0>;
> +					interrupt-parent = <&pmc>;
> +					interrupts = <AT91_PMC_MCKRDY>;
> +					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
> +					atmel,clk-output-range = <124000000 166000000>;
> +					atmel,clk-divisors = <1 2 4 3>;
> +				};
> +
> +				h32ck: h32mxck {
> +					#clock-cells = <0>;
> +					compatible = "atmel,sama5d4-clk-h32mx";
> +					clocks = <&mck>;
> +				};
> +
> +				usb: usbck {
> +					compatible = "atmel,at91sam9x5-clk-usb";
> +					#clock-cells = <0>;
> +					clocks = <&plladiv>, <&utmi>;
> +				};
> +
> +				prog: progck {
> +					compatible = "atmel,at91sam9x5-clk-programmable";
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					interrupt-parent = <&pmc>;
> +					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
> +
> +					prog0: prog0 {
> +						#clock-cells = <0>;
> +						reg = <0>;
> +						interrupts = <AT91_PMC_PCKRDY(0)>;
> +					};
> +
> +					prog1: prog1 {
> +						#clock-cells = <0>;
> +						reg = <1>;
> +						interrupts = <AT91_PMC_PCKRDY(1)>;
> +					};
> +
> +					prog2: prog2 {
> +						#clock-cells = <0>;
> +						reg = <2>;
> +						interrupts = <AT91_PMC_PCKRDY(2)>;
> +					};
> +				};
> +
> +				systemck {
> +					compatible = "atmel,at91rm9200-clk-system";
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					ddrck: ddrck {
> +						#clock-cells = <0>;
> +						reg = <2>;
> +						clocks = <&mck>;
> +					};
> +
> +					lcdck: lcdck {
> +						#clock-cells = <0>;
> +						reg = <3>;
> +						clocks = <&mck>;
> +					};
> +
> +					uhpck: uhpck {
> +						#clock-cells = <0>;
> +						reg = <6>;
> +						clocks = <&usb>;
> +					};
> +
> +					udpck: udpck {
> +						#clock-cells = <0>;
> +						reg = <7>;
> +						clocks = <&usb>;
> +					};
> +
> +					pck0: pck0 {
> +						#clock-cells = <0>;
> +						reg = <8>;
> +						clocks = <&prog0>;
> +					};
> +
> +					pck1: pck1 {
> +						#clock-cells = <0>;
> +						reg = <9>;
> +						clocks = <&prog1>;
> +					};
> +
> +					pck2: pck2 {
> +						#clock-cells = <0>;
> +						reg = <10>;
> +						clocks = <&prog2>;
> +					};
> +
> +					iscck: iscck {
> +						#clock-cells = <0>;
> +						reg = <18>;
> +						clocks = <&mck>;
> +					};
> +				};
> +
> +				periph32ck {
> +					compatible = "atmel,at91sam9x5-clk-peripheral";
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					clocks = <&h32ck>;
> +
> +					macb0_clk: macb0_clk {
> +						#clock-cells = <0>;
> +						reg = <5>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					tdes_clk: tdes_clk {
> +						#clock-cells = <0>;
> +						reg = <11>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					matrix1_clk: matrix1_clk {
> +						#clock-cells = <0>;
> +						reg = <14>;
> +					};
> +
> +					hsmc_clk: hsmc_clk {
> +						#clock-cells = <0>;
> +						reg = <17>;
> +					};
> +
> +					pioA_clk: pioA_clk {
> +						#clock-cells = <0>;
> +						reg = <18>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					flx0_clk: flx0_clk {
> +						#clock-cells = <0>;
> +						reg = <19>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					flx1_clk: flx1_clk {
> +						#clock-cells = <0>;
> +						reg = <20>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					flx2_clk: flx2_clk {
> +						#clock-cells = <0>;
> +						reg = <21>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					flx3_clk: flx3_clk {
> +						#clock-cells = <0>;
> +						reg = <22>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					flx4_clk: flx4_clk {
> +						#clock-cells = <0>;
> +						reg = <23>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					uart0_clk: uart0_clk {
> +						#clock-cells = <0>;
> +						reg = <24>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					uart1_clk: uart1_clk {
> +						#clock-cells = <0>;
> +						reg = <25>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					uart2_clk: uart2_clk {
> +						#clock-cells = <0>;
> +						reg = <26>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					uart3_clk: uart3_clk {
> +						#clock-cells = <0>;
> +						reg = <27>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					uart4_clk: uart4_clk {
> +						#clock-cells = <0>;
> +						reg = <28>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					twi0_clk: twi0_clk {
> +						reg = <29>;
> +						#clock-cells = <0>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					twi1_clk: twi1_clk {
> +						#clock-cells = <0>;
> +						reg = <30>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					spi0_clk: spi0_clk {
> +						#clock-cells = <0>;
> +						reg = <33>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					spi1_clk: spi1_clk {
> +						#clock-cells = <0>;
> +						reg = <34>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					tcb0_clk: tcb0_clk {
> +						#clock-cells = <0>;
> +						reg = <35>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					tcb1_clk: tcb1_clk {
> +						#clock-cells = <0>;
> +						reg = <36>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					pwm_clk: pwm_clk {
> +						#clock-cells = <0>;
> +						reg = <38>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					adc_clk: adc_clk {
> +						#clock-cells = <0>;
> +						reg = <40>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					uhphs_clk: uhphs_clk {
> +						#clock-cells = <0>;
> +						reg = <41>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					udphs_clk: udphs_clk {
> +						#clock-cells = <0>;
> +						reg = <42>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					ssc0_clk: ssc0_clk {
> +						#clock-cells = <0>;
> +						reg = <43>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					ssc1_clk: ssc1_clk {
> +						#clock-cells = <0>;
> +						reg = <44>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					trng_clk: trng_clk {
> +						#clock-cells = <0>;
> +						reg = <47>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +
> +					classd_clk: classd_clk {
> +						#clock-cells = <0>;
> +						reg = <59>;
> +						atmel,clk-output-range = <0 83000000>;
> +					};
> +				};
> +
> +				periph64ck {
> +					compatible = "atmel,at91sam9x5-clk-peripheral";
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					clocks = <&mck>;
> +
> +					dma0_clk: dma0_clk {
> +						#clock-cells = <0>;
> +						reg = <6>;
> +					};
> +
> +					dma1_clk: dma1_clk {
> +						#clock-cells = <0>;
> +						reg = <7>;
> +					};
> +
> +					aes_clk: aes_clk {
> +						#clock-cells = <0>;
> +						reg = <9>;
> +					};
> +
> +					aesb_clk: aesb_clk {
> +						#clock-cells = <0>;
> +						reg = <10>;
> +					};
> +
> +					sha_clk: sha_clk {
> +						#clock-cells = <0>;
> +						reg = <12>;
> +					};
> +
> +					mpddr_clk: mpddr_clk {
> +						#clock-cells = <0>;
> +						reg = <13>;
> +					};
> +
> +					matrix0_clk: matrix0_clk {
> +						#clock-cells = <0>;
> +						reg = <15>;
> +					};
> +
> +					sdmmc0_hclk: sdmmc0_hclk {
> +						#clock-cells = <0>;
> +						reg = <31>;
> +					};
> +
> +					sdmmc1_hclk: sdmmc1_hclk {
> +						#clock-cells = <0>;
> +						reg = <32>;
> +					};
> +
> +					lcdc_clk: lcdc_clk {
> +						#clock-cells = <0>;
> +						reg = <45>;
> +					};
> +
> +					isc_clk: isc_clk {
> +						#clock-cells = <0>;
> +						reg = <46>;
> +					};
> +
> +					qspi0_clk: qspi0_clk {
> +						#clock-cells = <0>;
> +						reg = <52>;
> +					};
> +
> +					qspi1_clk: qspi1_clk {
> +						#clock-cells = <0>;
> +						reg = <53>;
> +					};
> +				};
> +			};
> +
> +			sha at f0028000 {
> +				compatible = "atmel,at91sam9g46-sha";
> +				reg = <0xf0028000 0x100>;
> +				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(30))>;
> +				dma-names = "tx";
> +				clocks = <&sha_clk>;
> +				clock-names = "sha_clk";
> +				status = "disabled";
> +			};
> +
> +			aes at f002c000 {
> +				compatible = "atmel,at91sam9g46-aes";
> +				reg = <0xf002c000 0x100>;
> +				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(26))>,
> +				       <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(27))>;
> +				dma-names = "tx", "rx";
> +				clocks = <&aes_clk>;
> +				clock-names = "aes_clk";
> +				status = "disabled";
> +			};
> +
> +			spi0: spi at f8000000 {
> +				compatible = "atmel,at91rm9200-spi";
> +				reg = <0xf8000000 0x100>;
> +				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(6))>,
> +				       <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(7))>;
> +				dma-names = "tx", "rx";
> +				clocks = <&spi0_clk>;
> +				clock-names = "spi_clk";
> +				atmel,fifo-size = <16>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			macb0: ethernet at f8008000 {
> +				compatible = "atmel,sama5d2-gem";
> +				reg = <0xf8008000 0x1000>;
> +				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
> +					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
> +					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clocks = <&macb0_clk>, <&macb0_clk>;
> +				clock-names = "hclk", "pclk";
> +				status = "disabled";
> +			};
> +
> +			tcb0: timer at f800c000 {
> +				compatible = "atmel,at91sam9x5-tcb";
> +				reg = <0xf800c000 0x100>;
> +				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
> +				clocks = <&tcb0_clk>;
> +				clock-names = "t0_clk";
> +			};
> +
> +			tcb1: timer at f8010000 {
> +				compatible = "atmel,at91sam9x5-tcb";
> +				reg = <0xf8010000 0x100>;
> +				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
> +				clocks = <&tcb1_clk>;
> +				clock-names = "t0_clk";
> +			};
> +
> +			uart0: serial at f801c000 {
> +				compatible = "atmel,at91sam9260-usart";
> +				reg = <0xf801c000 0x100>;
> +				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&uart0_clk>;
> +				clock-names = "usart";
> +				status = "disabled";
> +			};
> +
> +			uart1: serial at f8020000 {
> +				compatible = "atmel,at91sam9260-usart";
> +				reg = <0xf8020000 0x100>;
> +				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&uart1_clk>;
> +				clock-names = "usart";
> +				status = "disabled";
> +			};
> +
> +			uart2: serial at f8024000 {
> +				compatible = "atmel,at91sam9260-usart";
> +				reg = <0xf8024000 0x100>;
> +				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&uart2_clk>;
> +				clock-names = "usart";
> +				status = "disabled";
> +			};
> +
> +			i2c0: i2c at f8028000 {
> +				compatible = "atmel,sama5d2-i2c";
> +				reg = <0xf8028000 0x100>;
> +				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(0))>,
> +				       <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(1))>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clocks = <&twi0_clk>;
> +				status = "disabled";
> +			};
> +
> +			pit: timer at f8048030 {
> +				compatible = "atmel,at91sam9260-pit";
> +				reg = <0xf8048030 0x10>;
> +				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
> +				clocks = <&h32ck>;
> +			};
> +
> +			sckc at f8048050 {
> +				compatible = "atmel,at91sam9x5-sckc";
> +				reg = <0xf8048050 0x4>;
> +
> +				slow_rc_osc: slow_rc_osc {
> +					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
> +					#clock-cells = <0>;
> +					clock-frequency = <32768>;
> +					clock-accuracy = <250000000>;
> +					atmel,startup-time-usec = <75>;
> +				};
> +
> +				slow_osc: slow_osc {
> +					compatible = "atmel,at91sam9x5-clk-slow-osc";
> +					#clock-cells = <0>;
> +					clocks = <&slow_xtal>;
> +					atmel,startup-time-usec = <1200000>;
> +				};
> +
> +				clk32k: slowck {
> +					compatible = "atmel,at91sam9x5-clk-slow";
> +					#clock-cells = <0>;
> +					clocks = <&slow_rc_osc &slow_osc>;
> +				};
> +			};
> +
> +			rtc at f80480b0 {
> +				compatible = "atmel,at91rm9200-rtc";
> +				reg = <0xf80480b0 0x30>;
> +				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
> +			};
> +
> +			spi1: spi at fc000000 {
> +				compatible = "atmel,at91rm9200-spi";
> +				reg = <0xfc000000 0x100>;
> +				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(8))>,
> +				       <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(9))>;
> +				dma-names = "tx", "rx";
> +				clocks = <&spi1_clk>;
> +				clock-names = "spi_clk";
> +				atmel,fifo-size = <16>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			uart3: serial at fc008000 {
> +				compatible = "atmel,at91sam9260-usart";
> +				reg = <0xfc008000 0x100>;
> +				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&uart3_clk>;
> +				clock-names = "usart";
> +				status = "disabled";
> +			};
> +
> +			uart4: serial at fc00c000 {
> +				compatible = "atmel,at91sam9260-usart";
> +				reg = <0xfc00c000 0x100>;
> +				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&uart4_clk>;
> +				clock-names = "usart";
> +				status = "disabled";
> +			};
> +
> +			aic: interrupt-controller at fc020000 {
> +				#interrupt-cells = <3>;
> +				compatible = "atmel,sama5d2-aic";
> +				interrupt-controller;
> +				reg = <0xfc020000 0x200>;
> +				atmel,external-irqs = <49>;
> +			};
> +
> +			i2c1: i2c at fc028000 {
> +				compatible = "atmel,sama5d2-i2c";
> +				reg = <0xfc028000 0x100>;
> +				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(2))>,
> +				       <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(3))>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clocks = <&twi1_clk>;
> +				status = "disabled";
> +			};
> +		};
> +	};
> +};
> 


-- 
Nicolas Ferre