From: Murali Karicheri <m-karicheri2@ti.com>
To: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <ssantosh@kernel.org>,
<mturquette@linaro.org>, <sboyd@codeaurora.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-clk@vger.kernel.org>, <linux@arm.linux.org.uk>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll
Date: Fri, 31 Jul 2015 10:20:02 -0400 [thread overview]
Message-ID: <55BB8412.2000905@ti.com> (raw)
In-Reply-To: <1432915453-409-2-git-send-email-m-karicheri2@ti.com>
On 05/29/2015 12:04 PM, Murali Karicheri wrote:
> All of the keystone devices have a separate register to hold post
> divider value for main pll clock. Currently the fixed-postdiv
> value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
> use a value of 2 for this. Now that we have fixed this in the pll
> clock driver change the dt bindings for the same.
>
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
> ---
> arch/arm/boot/dts/k2e-clocks.dtsi | 5 ++---
> arch/arm/boot/dts/k2hk-clocks.dtsi | 5 ++---
> arch/arm/boot/dts/k2l-clocks.dtsi | 5 ++---
> 3 files changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
> index 4773d6a..d56d68f 100644
> --- a/arch/arm/boot/dts/k2e-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2e-clocks.dtsi
> @@ -13,9 +13,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
> diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
> index d5adee3..af9b719 100644
> --- a/arch/arm/boot/dts/k2hk-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
> @@ -22,9 +22,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
> diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
> index eb1e3e2..ef8464b 100644
> --- a/arch/arm/boot/dts/k2l-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2l-clocks.dtsi
> @@ -22,9 +22,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
>
Santosh,
The clk driver update is already merged to v4.2-rc. Could you send this
DT update as well for 4.2-rc?
Murali
--
Murali Karicheri
Linux Kernel, Keystone
WARNING: multiple messages have this Message-ID (diff)
From: m-karicheri2@ti.com (Murali Karicheri)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll
Date: Fri, 31 Jul 2015 10:20:02 -0400 [thread overview]
Message-ID: <55BB8412.2000905@ti.com> (raw)
In-Reply-To: <1432915453-409-2-git-send-email-m-karicheri2@ti.com>
On 05/29/2015 12:04 PM, Murali Karicheri wrote:
> All of the keystone devices have a separate register to hold post
> divider value for main pll clock. Currently the fixed-postdiv
> value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
> use a value of 2 for this. Now that we have fixed this in the pll
> clock driver change the dt bindings for the same.
>
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
> ---
> arch/arm/boot/dts/k2e-clocks.dtsi | 5 ++---
> arch/arm/boot/dts/k2hk-clocks.dtsi | 5 ++---
> arch/arm/boot/dts/k2l-clocks.dtsi | 5 ++---
> 3 files changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
> index 4773d6a..d56d68f 100644
> --- a/arch/arm/boot/dts/k2e-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2e-clocks.dtsi
> @@ -13,9 +13,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk at 2620358 {
> diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
> index d5adee3..af9b719 100644
> --- a/arch/arm/boot/dts/k2hk-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
> @@ -22,9 +22,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk at 2620358 {
> diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
> index eb1e3e2..ef8464b 100644
> --- a/arch/arm/boot/dts/k2l-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2l-clocks.dtsi
> @@ -22,9 +22,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk at 2620358 {
>
Santosh,
The clk driver update is already merged to v4.2-rc. Could you send this
DT update as well for 4.2-rc?
Murali
--
Murali Karicheri
Linux Kernel, Keystone
WARNING: multiple messages have this Message-ID (diff)
From: Murali Karicheri <m-karicheri2@ti.com>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
ssantosh@kernel.org, mturquette@linaro.org, sboyd@codeaurora.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll
Date: Fri, 31 Jul 2015 10:20:02 -0400 [thread overview]
Message-ID: <55BB8412.2000905@ti.com> (raw)
In-Reply-To: <1432915453-409-2-git-send-email-m-karicheri2@ti.com>
On 05/29/2015 12:04 PM, Murali Karicheri wrote:
> All of the keystone devices have a separate register to hold post
> divider value for main pll clock. Currently the fixed-postdiv
> value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
> use a value of 2 for this. Now that we have fixed this in the pll
> clock driver change the dt bindings for the same.
>
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
> ---
> arch/arm/boot/dts/k2e-clocks.dtsi | 5 ++---
> arch/arm/boot/dts/k2hk-clocks.dtsi | 5 ++---
> arch/arm/boot/dts/k2l-clocks.dtsi | 5 ++---
> 3 files changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
> index 4773d6a..d56d68f 100644
> --- a/arch/arm/boot/dts/k2e-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2e-clocks.dtsi
> @@ -13,9 +13,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
> diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
> index d5adee3..af9b719 100644
> --- a/arch/arm/boot/dts/k2hk-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
> @@ -22,9 +22,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
> diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
> index eb1e3e2..ef8464b 100644
> --- a/arch/arm/boot/dts/k2l-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2l-clocks.dtsi
> @@ -22,9 +22,8 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,main-pll-clock";
> clocks = <&refclksys>;
> - reg = <0x02620350 4>, <0x02310110 4>;
> - reg-names = "control", "multiplier";
> - fixed-postdiv = <2>;
> + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
> + reg-names = "control", "multiplier", "post-divider";
> };
>
> papllclk: papllclk@2620358 {
>
Santosh,
The clk driver update is already merged to v4.2-rc. Could you send this
DT update as well for 4.2-rc?
Murali
--
Murali Karicheri
Linux Kernel, Keystone
next prev parent reply other threads:[~2015-07-31 14:21 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-29 16:04 [PATCH 1/2] clk: keystone: add support for post divider register for main pll Murali Karicheri
2015-05-29 16:04 ` Murali Karicheri
2015-05-29 16:04 ` Murali Karicheri
2015-05-29 16:04 ` [PATCH 2/2] ARM: dts: keystone: fix dt bindings to use post div register for mainpll Murali Karicheri
2015-05-29 16:04 ` Murali Karicheri
2015-05-29 16:04 ` Murali Karicheri
2015-07-31 14:20 ` Murali Karicheri [this message]
2015-07-31 14:20 ` Murali Karicheri
2015-07-31 14:20 ` Murali Karicheri
2015-07-31 15:30 ` santosh shilimkar
2015-07-31 15:30 ` santosh shilimkar
2015-07-31 15:30 ` santosh shilimkar
2015-07-31 15:30 ` santosh shilimkar
2015-07-31 20:30 ` Olof Johansson
2015-07-31 20:30 ` Olof Johansson
2015-07-31 22:06 ` santosh.shilimkar
2015-07-31 22:06 ` santosh.shilimkar at oracle.com
2015-06-09 15:25 ` [PATCH 1/2] clk: keystone: add support for post divider register for main pll Murali Karicheri
2015-06-09 15:25 ` Murali Karicheri
2015-06-09 15:25 ` Murali Karicheri
2015-06-09 15:28 ` Fwd: " Murali Karicheri
2015-06-09 15:28 ` Murali Karicheri
2015-06-09 17:34 ` santosh shilimkar
2015-06-09 17:34 ` santosh shilimkar
2015-06-15 16:26 ` Murali Karicheri
2015-06-15 16:26 ` Murali Karicheri
2015-06-15 16:26 ` Murali Karicheri
2015-06-18 22:37 ` Michael Turquette
2015-06-18 22:37 ` Michael Turquette
2015-06-18 22:37 ` Michael Turquette
2015-06-18 22:37 ` Michael Turquette
2015-06-18 22:55 ` santosh shilimkar
2015-06-18 22:55 ` santosh shilimkar
2015-06-22 20:15 ` Murali Karicheri
2015-06-22 20:15 ` Murali Karicheri
2015-06-22 20:15 ` Murali Karicheri
2015-06-22 20:15 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55BB8412.2000905@ti.com \
--to=m-karicheri2@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=ssantosh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.