* [U-Boot] [PATCH] sunxi: Enable musb in host mode on the Jesurun Q5
@ 2015-08-04 21:51 Hans de Goede
2015-08-05 8:09 ` Ian Campbell
0 siblings, 1 reply; 3+ messages in thread
From: Hans de Goede @ 2015-08-04 21:51 UTC (permalink / raw)
To: u-boot
The Jesurun Q5 has the musb hooked up to an usb-a receptacle, enable it
in host-only mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
configs/jesurun_q5_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index a2115b6..46c38e5 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=312
+CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
@@ -10,3 +11,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB0_VBUS_PIN="PB9"
--
2.4.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] sunxi: Enable musb in host mode on the Jesurun Q5
2015-08-04 21:51 [U-Boot] [PATCH] sunxi: Enable musb in host mode on the Jesurun Q5 Hans de Goede
@ 2015-08-05 8:09 ` Ian Campbell
2015-08-05 15:07 ` Hans de Goede
0 siblings, 1 reply; 3+ messages in thread
From: Ian Campbell @ 2015-08-05 8:09 UTC (permalink / raw)
To: u-boot
On Tue, 2015-08-04 at 23:51 +0200, Hans de Goede wrote:
> The Jesurun Q5 has the musb hooked up to an usb-a receptacle, enable it
> in host-only mode.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[..]
> @@ -2,6 +2,7 @@ CONFIG_ARM=y
> CONFIG_ARCH_SUNXI=y
> CONFIG_MACH_SUN4I=y
> CONFIG_DRAM_CLK=312
> +CONFIG_VIDEO_COMPOSITE=y
Did you intend this to be in one of the composite mode patches I just
looked at, or maybe a separate patch in that series? It doesn't seem to
belong here anyway.
> @@ -10,3 +11,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)"
> # CONFIG_CMD_FLASH is not set
> # CONFIG_CMD_FPGA is not set
> CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_MUSB_HOST=y
> +CONFIG_USB0_VBUS_PIN="PB9"
With the above commit message this hunk:
Acked-by: Ian Campbell <ijc@hellion.org.uk>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] sunxi: Enable musb in host mode on the Jesurun Q5
2015-08-05 8:09 ` Ian Campbell
@ 2015-08-05 15:07 ` Hans de Goede
0 siblings, 0 replies; 3+ messages in thread
From: Hans de Goede @ 2015-08-05 15:07 UTC (permalink / raw)
To: u-boot
Hi,
On 05-08-15 10:09, Ian Campbell wrote:
> On Tue, 2015-08-04 at 23:51 +0200, Hans de Goede wrote:
>> The Jesurun Q5 has the musb hooked up to an usb-a receptacle, enable it
>> in host-only mode.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> [..]
>> @@ -2,6 +2,7 @@ CONFIG_ARM=y
>> CONFIG_ARCH_SUNXI=y
>> CONFIG_MACH_SUN4I=y
>> CONFIG_DRAM_CLK=312
>> +CONFIG_VIDEO_COMPOSITE=y
>
> Did you intend this to be in one of the composite mode patches I just
> looked at, or maybe a separate patch in that series? It doesn't seem to
> belong here anyway.
>
Oops, dropped this from this commit as it indeed does not belong here.
>> @@ -10,3 +11,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)"
>> # CONFIG_CMD_FLASH is not set
>> # CONFIG_CMD_FPGA is not set
>> CONFIG_USB_EHCI_HCD=y
>> +CONFIG_USB_MUSB_HOST=y
>> +CONFIG_USB0_VBUS_PIN="PB9"
>
> With the above commit message this hunk:
>
> Acked-by: Ian Campbell <ijc@hellion.org.uk>
Thanks & Regards,
Hans
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-08-05 15:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-04 21:51 [U-Boot] [PATCH] sunxi: Enable musb in host mode on the Jesurun Q5 Hans de Goede
2015-08-05 8:09 ` Ian Campbell
2015-08-05 15:07 ` Hans de Goede
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.