[RFC PATCH v4 0/9]

[RFC PATCH v4 0/9]

[Shawn Lin]

Add external dma support for Synopsys MSHC

Synopsys DesignWare mobile storage host controller supports three
types of transfer mode: pio, internal dma and external dma. However,
dw_mmc can only supports pio and internal dma now. Thus some platforms
using dw-mshc integrated with generic dma can't work in dma mode. So we
submit this patch to achieve it.

And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
(commit:f95f3850) for the first version of dw_mmc and never be touched since
then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
time. Nowadays, device-tree helps us to support a variety of boards with one
kernel. That's why we need to remove it and decide the transfer mode by reading
dw_mmc's HCON reg at runtime.

This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
to make the running.

Patch does the following things:
- remove CONFIG_MMC_DW_IDMAC config option
- add bindings for edmac used by synopsys-dw-mshc
  at runtime
- add edmac support for synopsys-dw-mshc

Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc


Changes in v4:
- remove "host->trans_mode" and use "host->use_dma" to indicate
  transfer mode.
- remove all bt-bindings' changes since we don't need new properities.
- check transfer mode at runtime by reading HCON reg
- spilt defconfig changes for each sub-architecture
- fix the title of cover letter
- reuse some code for reducing code size

Changes in v3:
- choose transfer mode at runtime
- remove all CONFIG_MMC_DW_IDMAC config option
- add supports-idmac property for some platforms

Changes in v2:
- Fix typo of dev_info msg
- remove unused dmach from declaration of dw_mci_dma_slave

Shawn Lin (9):
  mmc: dw_mmc: Add external dma interface support
  Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
  mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
  arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC

 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |  25 ++
 arch/arc/configs/axs101_defconfig                  |   1 -
 arch/arc/configs/axs103_defconfig                  |   1 -
 arch/arc/configs/axs103_smp_defconfig              |   1 -
 arch/arm/configs/exynos_defconfig                  |   1 -
 arch/arm/configs/hisi_defconfig                    |   1 -
 arch/arm/configs/lpc18xx_defconfig                 |   1 -
 arch/arm/configs/multi_v7_defconfig                |   1 -
 arch/arm/configs/zx_defconfig                      |   1 -
 arch/mips/configs/pistachio_defconfig              |   1 -
 drivers/mmc/host/Kconfig                           |  11 +-
 drivers/mmc/host/dw_mmc-pltfm.c                    |   2 +
 drivers/mmc/host/dw_mmc.c                          | 258 +++++++++++++++++----
 include/linux/mmc/dw_mmc.h                         |  27 ++-
 14 files changed, 257 insertions(+), 75 deletions(-)

-- 
2.3.7

[RFC PATCH v4 0/9]

[Shawn Lin]

Add external dma support for Synopsys MSHC

Synopsys DesignWare mobile storage host controller supports three
types of transfer mode: pio, internal dma and external dma. However,
dw_mmc can only supports pio and internal dma now. Thus some platforms
using dw-mshc integrated with generic dma can't work in dma mode. So we
submit this patch to achieve it.

And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
(commit:f95f3850) for the first version of dw_mmc and never be touched since
then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
time. Nowadays, device-tree helps us to support a variety of boards with one
kernel. That's why we need to remove it and decide the transfer mode by reading
dw_mmc's HCON reg at runtime.

This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
to make the running.

Patch does the following things:
- remove CONFIG_MMC_DW_IDMAC config option
- add bindings for edmac used by synopsys-dw-mshc
  at runtime
- add edmac support for synopsys-dw-mshc

Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc


Changes in v4:
- remove "host->trans_mode" and use "host->use_dma" to indicate
  transfer mode.
- remove all bt-bindings' changes since we don't need new properities.
- check transfer mode at runtime by reading HCON reg
- spilt defconfig changes for each sub-architecture
- fix the title of cover letter
- reuse some code for reducing code size

Changes in v3:
- choose transfer mode at runtime
- remove all CONFIG_MMC_DW_IDMAC config option
- add supports-idmac property for some platforms

Changes in v2:
- Fix typo of dev_info msg
- remove unused dmach from declaration of dw_mci_dma_slave

Shawn Lin (9):
  mmc: dw_mmc: Add external dma interface support
  Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
  mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
  arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC

 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |  25 ++
 arch/arc/configs/axs101_defconfig                  |   1 -
 arch/arc/configs/axs103_defconfig                  |   1 -
 arch/arc/configs/axs103_smp_defconfig              |   1 -
 arch/arm/configs/exynos_defconfig                  |   1 -
 arch/arm/configs/hisi_defconfig                    |   1 -
 arch/arm/configs/lpc18xx_defconfig                 |   1 -
 arch/arm/configs/multi_v7_defconfig                |   1 -
 arch/arm/configs/zx_defconfig                      |   1 -
 arch/mips/configs/pistachio_defconfig              |   1 -
 drivers/mmc/host/Kconfig                           |  11 +-
 drivers/mmc/host/dw_mmc-pltfm.c                    |   2 +
 drivers/mmc/host/dw_mmc.c                          | 258 +++++++++++++++++----
 include/linux/mmc/dw_mmc.h                         |  27 ++-
 14 files changed, 257 insertions(+), 75 deletions(-)

-- 
2.3.7


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Shawn Lin]

DesignWare MMC Controller can supports two types of DMA
mode: external dma and internal dma. We get a RK312x platform
integrated dw_mmc and ARM pl330 dma controller. This patch add
edmac ops to support these platforms. I've tested it on RK312x
platform with edmac mode and RK3288 platform with idmac mode.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

---

Changes in v4:
- remove "host->trans_mode" and use "host->use_dma" to indicate
  transfer mode.
- remove all bt-bindings' changes since we don't need new properities.
- check transfer mode at runtime by reading HCON reg
- spilt defconfig changes for each sub-architecture
- fix the title of cover letter
- reuse some code for reducing code size

Changes in v3:
- choose transfer mode at runtime
- remove all CONFIG_MMC_DW_IDMAC config option
- add supports-idmac property for some platforms

Changes in v2:
- Fix typo of dev_info msg
- remove unused dmach from declaration of dw_mci_dma_slave

 drivers/mmc/host/Kconfig        |  11 +-
 drivers/mmc/host/dw_mmc-pltfm.c |   2 +
 drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
 include/linux/mmc/dw_mmc.h      |  27 ++++-
 4 files changed, 232 insertions(+), 66 deletions(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 6a0f9c7..a86c0eb 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -607,15 +607,7 @@ config MMC_DW
 	help
 	  This selects support for the Synopsys DesignWare Mobile Storage IP
 	  block, this provides host support for SD and MMC interfaces, in both
-	  PIO and external DMA modes.
-
-config MMC_DW_IDMAC
-	bool "Internal DMAC interface"
-	depends on MMC_DW
-	help
-	  This selects support for the internal DMAC block within the Synopsys
-	  Designware Mobile Storage IP block. This disables the external DMA
-	  interface.
+	  PIO, internal DMA mode and external DMA modes.
 
 config MMC_DW_PLTFM
 	tristate "Synopsys Designware MCI Support as platform device"
@@ -644,7 +636,6 @@ config MMC_DW_K3
 	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
 	depends on MMC_DW
 	select MMC_DW_PLTFM
-	select MMC_DW_IDMAC
 	help
 	  This selects support for Hisilicon K3 SoC specific extensions to the
 	  Synopsys DesignWare Memory Card Interface driver. Select this option
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index ec6dbcd..7e1d13b 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
 	host->pdata = pdev->dev.platform_data;
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	/* Get registers' physical base address */
+	host->phy_regs = (void *)(regs->start);
 	host->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(host->regs))
 		return PTR_ERR(host->regs);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 40e9d8e..5d6cdff 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -56,7 +56,7 @@
 #define DW_MCI_FREQ_MAX	200000000	/* unit: HZ */
 #define DW_MCI_FREQ_MIN	400000		/* unit: HZ */
 
-#ifdef CONFIG_MMC_DW_IDMAC
+
 #define IDMAC_INT_CLR		(SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
 				 SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
 				 SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
@@ -99,7 +99,6 @@ struct idmac_desc {
 
 	__le32		des3;	/* buffer 2 physical address */
 };
-#endif /* CONFIG_MMC_DW_IDMAC */
 
 static bool dw_mci_reset(struct dw_mci *host);
 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
@@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
 		return DMA_FROM_DEVICE;
 }
 
-#ifdef CONFIG_MMC_DW_IDMAC
 static void dw_mci_dma_cleanup(struct dw_mci *host)
 {
 	struct mmc_data *data = host->data;
@@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
 	mci_writel(host, BMOD, temp);
 }
 
-static void dw_mci_idmac_complete_dma(struct dw_mci *host)
+static void dw_mci_dmac_complete_dma(void *arg)
 {
+	struct dw_mci *host = arg;
 	struct mmc_data *data = host->data;
 
 	dev_vdbg(host->dev, "DMA complete\n");
 
+	if (host->use_dma == TRANS_MODE_EDMAC)
+		if (data && (data->flags & MMC_DATA_READ))
+			/* Invalidate cache after read */
+			dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
+					    data->sg,
+					    data->sg_len,
+					    DMA_FROM_DEVICE);
+
 	host->dma_ops->cleanup(host);
 
 	/*
@@ -527,7 +534,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
 	wmb();
 }
 
-static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
+static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
 {
 	u32 temp;
 
@@ -551,6 +558,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
 
 	/* Start it running */
 	mci_writel(host, PLDMND, 1);
+
+	return 0;
 }
 
 static int dw_mci_idmac_init(struct dw_mci *host)
@@ -629,10 +638,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
 	.init = dw_mci_idmac_init,
 	.start = dw_mci_idmac_start_dma,
 	.stop = dw_mci_idmac_stop_dma,
-	.complete = dw_mci_idmac_complete_dma,
+	.complete = dw_mci_dmac_complete_dma,
+	.cleanup = dw_mci_dma_cleanup,
+};
+
+static void dw_mci_edmac_stop_dma(struct dw_mci *host)
+{
+	dmaengine_terminate_all(host->dms->ch);
+}
+
+static int dw_mci_edmac_start_dma(struct dw_mci *host,
+					    unsigned int sg_len)
+{
+	struct dma_slave_config cfg;
+	struct dma_async_tx_descriptor *desc = NULL;
+	struct scatterlist *sgl = host->data->sg;
+	const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
+	u32 sg_elems = host->data->sg_len;
+	u32 fifoth_val;
+	u32 fifo_offset = host->fifo_reg - host->regs;
+	int ret = 0;
+
+	/* Set external dma config: burst size, burst width */
+	cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
+	cfg.src_addr = cfg.dst_addr;
+	cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	/* Match burst msize with external dma config */
+	fifoth_val = mci_readl(host, FIFOTH);
+	cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
+	cfg.src_maxburst = cfg.dst_maxburst;
+
+	if (host->data->flags & MMC_DATA_WRITE)
+		cfg.direction = DMA_MEM_TO_DEV;
+	else /* MMC_DATA_READ */
+		cfg.direction = DMA_DEV_TO_MEM;
+
+	ret = dmaengine_slave_config(host->dms->ch, &cfg);
+	if (ret) {
+		dev_err(host->dev, "Failed to config edmac.\n");
+		return -EBUSY;
+	}
+
+	desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
+				       sg_len, cfg.direction,
+				       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dev_err(host->dev, "Can't prepare slave sg.\n");
+		return -EBUSY;
+	}
+
+	/* Set dw_mci_edmac_complete_dma as callback */
+	desc->callback = dw_mci_dmac_complete_dma;
+	desc->callback_param = (void *)host;
+	dmaengine_submit(desc);
+
+	/* Flush cache before write */
+	if (host->data->flags & MMC_DATA_WRITE)
+		dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
+				       sg_elems, DMA_TO_DEVICE);
+
+	dma_async_issue_pending(host->dms->ch);
+
+	return 0;
+}
+
+static int dw_mci_edmac_init(struct dw_mci *host)
+{
+	/* Request external dma channel */
+	host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
+	if (!host->dms)
+		return -ENOMEM;
+
+	host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
+	if (!host->dms->ch) {
+		dev_err(host->dev,
+			"Failed to get external DMA channel %d\n",
+			host->dms->ch->chan_id);
+		kfree(host->dms);
+		host->dms = NULL;
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void dw_mci_edmac_exit(struct dw_mci *host)
+{
+	if (host->dms) {
+		if (host->dms->ch) {
+			dma_release_channel(host->dms->ch);
+			host->dms->ch = NULL;
+		}
+		kfree(host->dms);
+		host->dms = NULL;
+	}
+}
+
+static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
+	.init = dw_mci_edmac_init,
+	.exit = dw_mci_edmac_exit,
+	.start = dw_mci_edmac_start_dma,
+	.stop = dw_mci_edmac_stop_dma,
+	.complete = dw_mci_dmac_complete_dma,
 	.cleanup = dw_mci_dma_cleanup,
 };
-#endif /* CONFIG_MMC_DW_IDMAC */
 
 static int dw_mci_pre_dma_transfer(struct dw_mci *host,
 				   struct mmc_data *data,
@@ -712,7 +823,6 @@ static void dw_mci_post_req(struct mmc_host *mmc,
 
 static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
 {
-#ifdef CONFIG_MMC_DW_IDMAC
 	unsigned int blksz = data->blksz;
 	const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
 	u32 fifo_width = 1 << host->data_shift;
@@ -720,6 +830,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
 	u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
 	int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
 
+	/* pio should ship this scenario */
+	if (!host->use_dma)
+		return;
+
 	tx_wmark = (host->fifo_depth) / 2;
 	tx_wmark_invers = host->fifo_depth - tx_wmark;
 
@@ -748,7 +862,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
 done:
 	fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
 	mci_writel(host, FIFOTH, fifoth_val);
-#endif
 }
 
 static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
@@ -835,7 +948,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
 	mci_writel(host, INTMASK, temp);
 	spin_unlock_irqrestore(&host->irq_lock, irqflags);
 
-	host->dma_ops->start(host, sg_len);
+	if (host->dma_ops->start(host, sg_len)) {
+		/* We can't do DMA */
+		dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
+		return -ENODEV;
+	}
 
 	return 0;
 }
@@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 
 	}
 
-#ifdef CONFIG_MMC_DW_IDMAC
-	/* Handle DMA interrupts */
-	if (host->dma_64bit_address == 1) {
-		pending = mci_readl(host, IDSTS64);
-		if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
-			mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
-							SDMMC_IDMAC_INT_RI);
-			mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
-			host->dma_ops->complete(host);
-		}
-	} else {
-		pending = mci_readl(host, IDSTS);
-		if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
-			mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
-							SDMMC_IDMAC_INT_RI);
-			mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
-			host->dma_ops->complete(host);
+	if (host->use_dma == TRANS_MODE_IDMAC) {
+		/* Handle DMA interrupts */
+		if (host->dma_64bit_address == 1) {
+			pending = mci_readl(host, IDSTS64);
+			if (pending & (SDMMC_IDMAC_INT_TI |
+				       SDMMC_IDMAC_INT_RI)) {
+				mci_writel(host, IDSTS64,
+					   SDMMC_IDMAC_INT_TI |
+					   SDMMC_IDMAC_INT_RI);
+				mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
+				host->dma_ops->complete((void *)host);
+			}
+		} else {
+			pending = mci_readl(host, IDSTS);
+			if (pending & (SDMMC_IDMAC_INT_TI |
+				       SDMMC_IDMAC_INT_RI)) {
+				mci_writel(host, IDSTS,
+					   SDMMC_IDMAC_INT_TI |
+					   SDMMC_IDMAC_INT_RI);
+				mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
+				host->dma_ops->complete((void *)host);
+			}
 		}
 	}
-#endif
 
 	return IRQ_HANDLED;
 }
@@ -2391,19 +2512,28 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 		mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
 	} else {
 		/* Useful defaults if platform data is unset. */
-#ifdef CONFIG_MMC_DW_IDMAC
-		mmc->max_segs = host->ring_size;
-		mmc->max_blk_size = 65536;
-		mmc->max_seg_size = 0x1000;
-		mmc->max_req_size = mmc->max_seg_size * host->ring_size;
-		mmc->max_blk_count = mmc->max_req_size / 512;
-#else
-		mmc->max_segs = 64;
-		mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
-		mmc->max_blk_count = 512;
-		mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
-		mmc->max_seg_size = mmc->max_req_size;
-#endif /* CONFIG_MMC_DW_IDMAC */
+		if (host->use_dma == TRANS_MODE_IDMAC) {
+			mmc->max_segs = host->ring_size;
+			mmc->max_blk_size = 65536;
+			mmc->max_seg_size = 0x1000;
+			mmc->max_req_size = mmc->max_seg_size * host->ring_size;
+			mmc->max_blk_count = mmc->max_req_size / 512;
+		} else if (host->use_dma == TRANS_MODE_EDMAC) {
+			mmc->max_segs = 64;
+			mmc->max_blk_size = 65536;
+			mmc->max_blk_count = 65535;
+			mmc->max_req_size =
+					mmc->max_blk_size * mmc->max_blk_count;
+			mmc->max_seg_size = mmc->max_req_size;
+		} else {
+			/* TRANS_MODE_PIO */
+			mmc->max_segs = 64;
+			mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
+			mmc->max_blk_count = 512;
+			mmc->max_req_size =
+					mmc->max_blk_size * mmc->max_blk_count;
+			mmc->max_seg_size = mmc->max_req_size;
+		}
 	}
 
 	if (dw_mci_get_cd(mmc))
@@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
 static void dw_mci_init_dma(struct dw_mci *host)
 {
 	int addr_config;
+	int trans_mode;
+	struct device *dev = host->dev;
+	struct device_node *np = dev->of_node;
+
+	/* Check tansfer mode */
+	trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
+	if (trans_mode == 0) {
+		trans_mode = TRANS_MODE_IDMAC;
+	} else if (trans_mode == 1 || trans_mode == 2) {
+		trans_mode = TRANS_MODE_EDMAC;
+	} else {
+		trans_mode = TRANS_MODE_PIO;
+		goto no_dma;
+	}
+
 	/* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
 	addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
 
@@ -2462,10 +2607,19 @@ static void dw_mci_init_dma(struct dw_mci *host)
 	}
 
 	/* Determine which DMA interface to use */
-#ifdef CONFIG_MMC_DW_IDMAC
-	host->dma_ops = &dw_mci_idmac_ops;
-	dev_info(host->dev, "Using internal DMA controller.\n");
-#endif
+	if (trans_mode == TRANS_MODE_IDMAC) {
+		host->dma_ops = &dw_mci_idmac_ops;
+		dev_info(host->dev, "Using internal DMA controller.\n");
+	} else {
+		/* TRANS_MODE_EDMAC: check dma bindings again */
+		if ((of_property_count_strings(np, "dma-names") < 0) ||
+		    (!of_find_property(np, "dmas", NULL))) {
+			trans_mode = TRANS_MODE_PIO;
+			goto no_dma;
+		}
+		host->dma_ops = &dw_mci_edmac_ops;
+		dev_info(host->dev, "Using external DMA controller.\n");
+	}
 
 	if (!host->dma_ops)
 		goto no_dma;
@@ -2482,12 +2636,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
 		goto no_dma;
 	}
 
-	host->use_dma = 1;
+	host->use_dma = trans_mode;
 	return;
 
 no_dma:
 	dev_info(host->dev, "Using PIO mode.\n");
-	host->use_dma = 0;
+	host->use_dma = trans_mode;
 	return;
 }
 
@@ -2570,10 +2724,9 @@ static bool dw_mci_reset(struct dw_mci *host)
 		}
 	}
 
-#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
-	/* It is also recommended that we reset and reprogram idmac */
-	dw_mci_idmac_reset(host);
-#endif
+	if (host->use_dma == TRANS_MODE_IDMAC)
+		/* It is also recommended that we reset and reprogram idmac */
+		dw_mci_idmac_reset(host);
 
 	ret = true;
 
@@ -2958,6 +3111,9 @@ EXPORT_SYMBOL(dw_mci_remove);
  */
 int dw_mci_suspend(struct dw_mci *host)
 {
+	if (host->use_dma && host->dma_ops->exit)
+		host->dma_ops->exit(host);
+
 	return 0;
 }
 EXPORT_SYMBOL(dw_mci_suspend);
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 5be9767..9ed6257 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -16,6 +16,7 @@
 
 #include <linux/scatterlist.h>
 #include <linux/mmc/core.h>
+#include <linux/dmaengine.h>
 
 #define MAX_MCI_SLOTS	2
 
@@ -40,6 +41,17 @@ enum {
 
 struct mmc_data;
 
+enum {
+	TRANS_MODE_PIO = 0,
+	TRANS_MODE_IDMAC,
+	TRANS_MODE_EDMAC
+};
+
+struct dw_mci_dma_slave {
+	struct dma_chan *ch;
+	enum dma_transfer_direction direction;
+};
+
 /**
  * struct dw_mci - MMC controller state shared between all slots
  * @lock: Spinlock protecting the queue and associated data.
@@ -153,11 +165,16 @@ struct dw_mci {
 	dma_addr_t		sg_dma;
 	void			*sg_cpu;
 	const struct dw_mci_dma_ops	*dma_ops;
-#ifdef CONFIG_MMC_DW_IDMAC
+	/* For idmac */
 	unsigned int		ring_size;
-#else
+
+	/* For edmac */
+	struct dw_mci_dma_slave *dms;
+	/* Registers's physical base address */
+	void                    *phy_regs;
+
 	struct dw_mci_dma_data	*dma_data;
-#endif
+
 	u32			cmd_status;
 	u32			data_status;
 	u32			stop_cmdr;
@@ -210,8 +227,8 @@ struct dw_mci {
 struct dw_mci_dma_ops {
 	/* DMA Ops */
 	int (*init)(struct dw_mci *host);
-	void (*start)(struct dw_mci *host, unsigned int sg_len);
-	void (*complete)(struct dw_mci *host);
+	int (*start)(struct dw_mci *host, unsigned int sg_len);
+	void (*complete)(void *host);
 	void (*stop)(struct dw_mci *host);
 	void (*cleanup)(struct dw_mci *host);
 	void (*exit)(struct dw_mci *host);
-- 
2.3.7

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Krzysztof Kozlowski]

On 06.08.2015 15:44, Shawn Lin wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK312x
> platform with edmac mode and RK3288 platform with idmac mode.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> 
> ---
> 
> Changes in v4:
> - remove "host->trans_mode" and use "host->use_dma" to indicate
>   transfer mode.
> - remove all bt-bindings' changes since we don't need new properities.
> - check transfer mode at runtime by reading HCON reg
> - spilt defconfig changes for each sub-architecture
> - fix the title of cover letter

How did you fixed the title? It is still empty :)
	Subject: [RFC PATCH v4 0/9]

> - reuse some code for reducing code size
> 
> Changes in v3:
> - choose transfer mode at runtime
> - remove all CONFIG_MMC_DW_IDMAC config option
> - add supports-idmac property for some platforms
> 
> Changes in v2:
> - Fix typo of dev_info msg
> - remove unused dmach from declaration of dw_mci_dma_slave
> 
>  drivers/mmc/host/Kconfig        |  11 +-
>  drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>  drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
>  include/linux/mmc/dw_mmc.h      |  27 ++++-
>  4 files changed, 232 insertions(+), 66 deletions(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 6a0f9c7..a86c0eb 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -607,15 +607,7 @@ config MMC_DW
>  	help
>  	  This selects support for the Synopsys DesignWare Mobile Storage IP
>  	  block, this provides host support for SD and MMC interfaces, in both
> -	  PIO and external DMA modes.
> -
> -config MMC_DW_IDMAC
> -	bool "Internal DMAC interface"
> -	depends on MMC_DW
> -	help
> -	  This selects support for the internal DMAC block within the Synopsys
> -	  Designware Mobile Storage IP block. This disables the external DMA
> -	  interface.
> +	  PIO, internal DMA mode and external DMA modes.
>  
>  config MMC_DW_PLTFM
>  	tristate "Synopsys Designware MCI Support as platform device"
> @@ -644,7 +636,6 @@ config MMC_DW_K3
>  	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>  	depends on MMC_DW
>  	select MMC_DW_PLTFM
> -	select MMC_DW_IDMAC
>  	help
>  	  This selects support for Hisilicon K3 SoC specific extensions to the
>  	  Synopsys DesignWare Memory Card Interface driver. Select this option
> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
> index ec6dbcd..7e1d13b 100644
> --- a/drivers/mmc/host/dw_mmc-pltfm.c
> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>  	host->pdata = pdev->dev.platform_data;
>  
>  	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	/* Get registers' physical base address */
> +	host->phy_regs = (void *)(regs->start);
>  	host->regs = devm_ioremap_resource(&pdev->dev, regs);
>  	if (IS_ERR(host->regs))
>  		return PTR_ERR(host->regs);
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 40e9d8e..5d6cdff 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -56,7 +56,7 @@
>  #define DW_MCI_FREQ_MAX	200000000	/* unit: HZ */
>  #define DW_MCI_FREQ_MIN	400000		/* unit: HZ */
>  
> -#ifdef CONFIG_MMC_DW_IDMAC
> +
>  #define IDMAC_INT_CLR		(SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>  				 SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>  				 SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
> @@ -99,7 +99,6 @@ struct idmac_desc {
>  
>  	__le32		des3;	/* buffer 2 physical address */
>  };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>  
>  static bool dw_mci_reset(struct dw_mci *host);
>  static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>  		return DMA_FROM_DEVICE;
>  }
>  
> -#ifdef CONFIG_MMC_DW_IDMAC
>  static void dw_mci_dma_cleanup(struct dw_mci *host)
>  {
>  	struct mmc_data *data = host->data;
> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>  	mci_writel(host, BMOD, temp);
>  }
>  
> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
> +static void dw_mci_dmac_complete_dma(void *arg)
>  {
> +	struct dw_mci *host = arg;

Why changing the argument to void*?

Best regards,
Krzysztof

>  	struct mmc_data *data = host->data;
>  
>  	dev_vdbg(host->dev, "DMA complete\n");
>  
> +	if (host->use_dma == TRANS_MODE_EDMAC)
> +		if (data && (data->flags & MMC_DATA_READ))
> +			/* Invalidate cache after read */
> +			dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
> +					    data->sg,
> +					    data->sg_len,
> +					    DMA_FROM_DEVICE);
> +
>  	host->dma_ops->cleanup(host);

[RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Krzysztof Kozlowski]

On 06.08.2015 15:44, Shawn Lin wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK312x
> platform with edmac mode and RK3288 platform with idmac mode.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> 
> ---
> 
> Changes in v4:
> - remove "host->trans_mode" and use "host->use_dma" to indicate
>   transfer mode.
> - remove all bt-bindings' changes since we don't need new properities.
> - check transfer mode at runtime by reading HCON reg
> - spilt defconfig changes for each sub-architecture
> - fix the title of cover letter

How did you fixed the title? It is still empty :)
	Subject: [RFC PATCH v4 0/9]

> - reuse some code for reducing code size
> 
> Changes in v3:
> - choose transfer mode at runtime
> - remove all CONFIG_MMC_DW_IDMAC config option
> - add supports-idmac property for some platforms
> 
> Changes in v2:
> - Fix typo of dev_info msg
> - remove unused dmach from declaration of dw_mci_dma_slave
> 
>  drivers/mmc/host/Kconfig        |  11 +-
>  drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>  drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
>  include/linux/mmc/dw_mmc.h      |  27 ++++-
>  4 files changed, 232 insertions(+), 66 deletions(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 6a0f9c7..a86c0eb 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -607,15 +607,7 @@ config MMC_DW
>  	help
>  	  This selects support for the Synopsys DesignWare Mobile Storage IP
>  	  block, this provides host support for SD and MMC interfaces, in both
> -	  PIO and external DMA modes.
> -
> -config MMC_DW_IDMAC
> -	bool "Internal DMAC interface"
> -	depends on MMC_DW
> -	help
> -	  This selects support for the internal DMAC block within the Synopsys
> -	  Designware Mobile Storage IP block. This disables the external DMA
> -	  interface.
> +	  PIO, internal DMA mode and external DMA modes.
>  
>  config MMC_DW_PLTFM
>  	tristate "Synopsys Designware MCI Support as platform device"
> @@ -644,7 +636,6 @@ config MMC_DW_K3
>  	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>  	depends on MMC_DW
>  	select MMC_DW_PLTFM
> -	select MMC_DW_IDMAC
>  	help
>  	  This selects support for Hisilicon K3 SoC specific extensions to the
>  	  Synopsys DesignWare Memory Card Interface driver. Select this option
> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
> index ec6dbcd..7e1d13b 100644
> --- a/drivers/mmc/host/dw_mmc-pltfm.c
> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>  	host->pdata = pdev->dev.platform_data;
>  
>  	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	/* Get registers' physical base address */
> +	host->phy_regs = (void *)(regs->start);
>  	host->regs = devm_ioremap_resource(&pdev->dev, regs);
>  	if (IS_ERR(host->regs))
>  		return PTR_ERR(host->regs);
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 40e9d8e..5d6cdff 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -56,7 +56,7 @@
>  #define DW_MCI_FREQ_MAX	200000000	/* unit: HZ */
>  #define DW_MCI_FREQ_MIN	400000		/* unit: HZ */
>  
> -#ifdef CONFIG_MMC_DW_IDMAC
> +
>  #define IDMAC_INT_CLR		(SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>  				 SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>  				 SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
> @@ -99,7 +99,6 @@ struct idmac_desc {
>  
>  	__le32		des3;	/* buffer 2 physical address */
>  };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>  
>  static bool dw_mci_reset(struct dw_mci *host);
>  static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>  		return DMA_FROM_DEVICE;
>  }
>  
> -#ifdef CONFIG_MMC_DW_IDMAC
>  static void dw_mci_dma_cleanup(struct dw_mci *host)
>  {
>  	struct mmc_data *data = host->data;
> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>  	mci_writel(host, BMOD, temp);
>  }
>  
> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
> +static void dw_mci_dmac_complete_dma(void *arg)
>  {
> +	struct dw_mci *host = arg;

Why changing the argument to void*?

Best regards,
Krzysztof

>  	struct mmc_data *data = host->data;
>  
>  	dev_vdbg(host->dev, "DMA complete\n");
>  
> +	if (host->use_dma == TRANS_MODE_EDMAC)
> +		if (data && (data->flags & MMC_DATA_READ))
> +			/* Invalidate cache after read */
> +			dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
> +					    data->sg,
> +					    data->sg_len,
> +					    DMA_FROM_DEVICE);
> +
>  	host->dma_ops->cleanup(host);

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Shawn Lin]

在 2015/8/6 15:08, Krzysztof Kozlowski 写道:
> On 06.08.2015 15:44, Shawn Lin wrote:
>> DesignWare MMC Controller can supports two types of DMA
>> mode: external dma and internal dma. We get a RK312x platform
>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>> edmac ops to support these platforms. I've tested it on RK312x
>> platform with edmac mode and RK3288 platform with idmac mode.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>>
>> ---
>>
>> Changes in v4:
>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>    transfer mode.
>> - remove all bt-bindings' changes since we don't need new properities.
>> - check transfer mode at runtime by reading HCON reg
>> - spilt defconfig changes for each sub-architecture
>> - fix the title of cover letter
> How did you fixed the title? It is still empty :)
> 	Subject: [RFC PATCH v4 0/9]
   I mentioned that in ChangeLog-v4 but unfortunately I forgot it.
   Thanks, Krzysztof.  I will be more careful and add it for next version.

>
>> - reuse some code for reducing code size
>>
>> Changes in v3:
>> - choose transfer mode at runtime
>> - remove all CONFIG_MMC_DW_IDMAC config option
>> - add supports-idmac property for some platforms
>>
>> Changes in v2:
>> - Fix typo of dev_info msg
>> - remove unused dmach from declaration of dw_mci_dma_slave
>>
>>   drivers/mmc/host/Kconfig        |  11 +-
>>   drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>>   drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
>>   include/linux/mmc/dw_mmc.h      |  27 ++++-
>>   4 files changed, 232 insertions(+), 66 deletions(-)
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>> index 6a0f9c7..a86c0eb 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -607,15 +607,7 @@ config MMC_DW
>>   	help
>>   	  This selects support for the Synopsys DesignWare Mobile Storage IP
>>   	  block, this provides host support for SD and MMC interfaces, in both
>> -	  PIO and external DMA modes.
>> -
>> -config MMC_DW_IDMAC
>> -	bool "Internal DMAC interface"
>> -	depends on MMC_DW
>> -	help
>> -	  This selects support for the internal DMAC block within the Synopsys
>> -	  Designware Mobile Storage IP block. This disables the external DMA
>> -	  interface.
>> +	  PIO, internal DMA mode and external DMA modes.
>>   
>>   config MMC_DW_PLTFM
>>   	tristate "Synopsys Designware MCI Support as platform device"
>> @@ -644,7 +636,6 @@ config MMC_DW_K3
>>   	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>>   	depends on MMC_DW
>>   	select MMC_DW_PLTFM
>> -	select MMC_DW_IDMAC
>>   	help
>>   	  This selects support for Hisilicon K3 SoC specific extensions to the
>>   	  Synopsys DesignWare Memory Card Interface driver. Select this option
>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
>> index ec6dbcd..7e1d13b 100644
>> --- a/drivers/mmc/host/dw_mmc-pltfm.c
>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>>   	host->pdata = pdev->dev.platform_data;
>>   
>>   	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	/* Get registers' physical base address */
>> +	host->phy_regs = (void *)(regs->start);
>>   	host->regs = devm_ioremap_resource(&pdev->dev, regs);
>>   	if (IS_ERR(host->regs))
>>   		return PTR_ERR(host->regs);
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 40e9d8e..5d6cdff 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -56,7 +56,7 @@
>>   #define DW_MCI_FREQ_MAX	200000000	/* unit: HZ */
>>   #define DW_MCI_FREQ_MIN	400000		/* unit: HZ */
>>   
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> +
>>   #define IDMAC_INT_CLR		(SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>>   				 SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>>   				 SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
>> @@ -99,7 +99,6 @@ struct idmac_desc {
>>   
>>   	__le32		des3;	/* buffer 2 physical address */
>>   };
>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>   
>>   static bool dw_mci_reset(struct dw_mci *host);
>>   static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
>> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>>   		return DMA_FROM_DEVICE;
>>   }
>>   
>> -#ifdef CONFIG_MMC_DW_IDMAC
>>   static void dw_mci_dma_cleanup(struct dw_mci *host)
>>   {
>>   	struct mmc_data *data = host->data;
>> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>>   	mci_writel(host, BMOD, temp);
>>   }
>>   
>> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
>> +static void dw_mci_dmac_complete_dma(void *arg)
>>   {
>> +	struct dw_mci *host = arg;
> Why changing the argument to void*?

This function will be used as callback hook of dmaengine, and the 
prototype is
"typedef void (*dma_async_tx_callback)(void *dma_async_param);".
w/o this change, we meet a warning  for incompatible pointer case.

>
> Best regards,
> Krzysztof
>
>>   	struct mmc_data *data = host->data;
>>   
>>   	dev_vdbg(host->dev, "DMA complete\n");
>>   
>> +	if (host->use_dma == TRANS_MODE_EDMAC)
>> +		if (data && (data->flags & MMC_DATA_READ))
>> +			/* Invalidate cache after read */
>> +			dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
>> +					    data->sg,
>> +					    data->sg_len,
>> +					    DMA_FROM_DEVICE);
>> +
>>   	host->dma_ops->cleanup(host);
>
>
>
>


-- 
Shawn Lin

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Krzysztof Kozlowski]

On 06.08.2015 16:26, Shawn Lin wrote:
> 在 2015/8/6 15:08, Krzysztof Kozlowski 写道:
>> On 06.08.2015 15:44, Shawn Lin wrote:
>>> DesignWare MMC Controller can supports two types of DMA
>>> mode: external dma and internal dma. We get a RK312x platform
>>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>>> edmac ops to support these platforms. I've tested it on RK312x
>>> platform with edmac mode and RK3288 platform with idmac mode.
>>>
>>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>>>
>>> ---
>>>
>>> Changes in v4:
>>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>>    transfer mode.
>>> - remove all bt-bindings' changes since we don't need new properities.
>>> - check transfer mode at runtime by reading HCON reg
>>> - spilt defconfig changes for each sub-architecture
>>> - fix the title of cover letter
>> How did you fixed the title? It is still empty :)
>>     Subject: [RFC PATCH v4 0/9]
>   I mentioned that in ChangeLog-v4 but unfortunately I forgot it.
>   Thanks, Krzysztof.  I will be more careful and add it for next version.
> 
>>
>>> - reuse some code for reducing code size
>>>
>>> Changes in v3:
>>> - choose transfer mode at runtime
>>> - remove all CONFIG_MMC_DW_IDMAC config option
>>> - add supports-idmac property for some platforms
>>>
>>> Changes in v2:
>>> - Fix typo of dev_info msg
>>> - remove unused dmach from declaration of dw_mci_dma_slave
>>>
>>>   drivers/mmc/host/Kconfig        |  11 +-
>>>   drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>>>   drivers/mmc/host/dw_mmc.c       | 258
>>> ++++++++++++++++++++++++++++++++--------
>>>   include/linux/mmc/dw_mmc.h      |  27 ++++-
>>>   4 files changed, 232 insertions(+), 66 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>> index 6a0f9c7..a86c0eb 100644
>>> --- a/drivers/mmc/host/Kconfig
>>> +++ b/drivers/mmc/host/Kconfig
>>> @@ -607,15 +607,7 @@ config MMC_DW
>>>       help
>>>         This selects support for the Synopsys DesignWare Mobile
>>> Storage IP
>>>         block, this provides host support for SD and MMC interfaces,
>>> in both
>>> -      PIO and external DMA modes.
>>> -
>>> -config MMC_DW_IDMAC
>>> -    bool "Internal DMAC interface"
>>> -    depends on MMC_DW
>>> -    help
>>> -      This selects support for the internal DMAC block within the
>>> Synopsys
>>> -      Designware Mobile Storage IP block. This disables the external
>>> DMA
>>> -      interface.
>>> +      PIO, internal DMA mode and external DMA modes.
>>>     config MMC_DW_PLTFM
>>>       tristate "Synopsys Designware MCI Support as platform device"
>>> @@ -644,7 +636,6 @@ config MMC_DW_K3
>>>       tristate "K3 specific extensions for Synopsys DW Memory Card
>>> Interface"
>>>       depends on MMC_DW
>>>       select MMC_DW_PLTFM
>>> -    select MMC_DW_IDMAC
>>>       help
>>>         This selects support for Hisilicon K3 SoC specific extensions
>>> to the
>>>         Synopsys DesignWare Memory Card Interface driver. Select this
>>> option
>>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c
>>> b/drivers/mmc/host/dw_mmc-pltfm.c
>>> index ec6dbcd..7e1d13b 100644
>>> --- a/drivers/mmc/host/dw_mmc-pltfm.c
>>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
>>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device
>>> *pdev,
>>>       host->pdata = pdev->dev.platform_data;
>>>         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> +    /* Get registers' physical base address */
>>> +    host->phy_regs = (void *)(regs->start);
>>>       host->regs = devm_ioremap_resource(&pdev->dev, regs);
>>>       if (IS_ERR(host->regs))
>>>           return PTR_ERR(host->regs);
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index 40e9d8e..5d6cdff 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -56,7 +56,7 @@
>>>   #define DW_MCI_FREQ_MAX    200000000    /* unit: HZ */
>>>   #define DW_MCI_FREQ_MIN    400000        /* unit: HZ */
>>>   -#ifdef CONFIG_MMC_DW_IDMAC
>>> +
>>>   #define IDMAC_INT_CLR        (SDMMC_IDMAC_INT_AI |
>>> SDMMC_IDMAC_INT_NI | \
>>>                    SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>>>                    SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
>>> @@ -99,7 +99,6 @@ struct idmac_desc {
>>>         __le32        des3;    /* buffer 2 physical address */
>>>   };
>>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>>     static bool dw_mci_reset(struct dw_mci *host);
>>>   static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
>>> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>>>           return DMA_FROM_DEVICE;
>>>   }
>>>   -#ifdef CONFIG_MMC_DW_IDMAC
>>>   static void dw_mci_dma_cleanup(struct dw_mci *host)
>>>   {
>>>       struct mmc_data *data = host->data;
>>> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci
>>> *host)
>>>       mci_writel(host, BMOD, temp);
>>>   }
>>>   -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
>>> +static void dw_mci_dmac_complete_dma(void *arg)
>>>   {
>>> +    struct dw_mci *host = arg;
>> Why changing the argument to void*?
> 
> This function will be used as callback hook of dmaengine, and the
> prototype is
> "typedef void (*dma_async_tx_callback)(void *dma_async_param);".
> w/o this change, we meet a warning  for incompatible pointer case.

Thanks for clarifying.

Best regards,
Krzysztof

[RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Krzysztof Kozlowski]

On 06.08.2015 16:26, Shawn Lin wrote:
> ? 2015/8/6 15:08, Krzysztof Kozlowski ??:
>> On 06.08.2015 15:44, Shawn Lin wrote:
>>> DesignWare MMC Controller can supports two types of DMA
>>> mode: external dma and internal dma. We get a RK312x platform
>>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>>> edmac ops to support these platforms. I've tested it on RK312x
>>> platform with edmac mode and RK3288 platform with idmac mode.
>>>
>>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>>>
>>> ---
>>>
>>> Changes in v4:
>>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>>    transfer mode.
>>> - remove all bt-bindings' changes since we don't need new properities.
>>> - check transfer mode at runtime by reading HCON reg
>>> - spilt defconfig changes for each sub-architecture
>>> - fix the title of cover letter
>> How did you fixed the title? It is still empty :)
>>     Subject: [RFC PATCH v4 0/9]
>   I mentioned that in ChangeLog-v4 but unfortunately I forgot it.
>   Thanks, Krzysztof.  I will be more careful and add it for next version.
> 
>>
>>> - reuse some code for reducing code size
>>>
>>> Changes in v3:
>>> - choose transfer mode at runtime
>>> - remove all CONFIG_MMC_DW_IDMAC config option
>>> - add supports-idmac property for some platforms
>>>
>>> Changes in v2:
>>> - Fix typo of dev_info msg
>>> - remove unused dmach from declaration of dw_mci_dma_slave
>>>
>>>   drivers/mmc/host/Kconfig        |  11 +-
>>>   drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>>>   drivers/mmc/host/dw_mmc.c       | 258
>>> ++++++++++++++++++++++++++++++++--------
>>>   include/linux/mmc/dw_mmc.h      |  27 ++++-
>>>   4 files changed, 232 insertions(+), 66 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>> index 6a0f9c7..a86c0eb 100644
>>> --- a/drivers/mmc/host/Kconfig
>>> +++ b/drivers/mmc/host/Kconfig
>>> @@ -607,15 +607,7 @@ config MMC_DW
>>>       help
>>>         This selects support for the Synopsys DesignWare Mobile
>>> Storage IP
>>>         block, this provides host support for SD and MMC interfaces,
>>> in both
>>> -      PIO and external DMA modes.
>>> -
>>> -config MMC_DW_IDMAC
>>> -    bool "Internal DMAC interface"
>>> -    depends on MMC_DW
>>> -    help
>>> -      This selects support for the internal DMAC block within the
>>> Synopsys
>>> -      Designware Mobile Storage IP block. This disables the external
>>> DMA
>>> -      interface.
>>> +      PIO, internal DMA mode and external DMA modes.
>>>     config MMC_DW_PLTFM
>>>       tristate "Synopsys Designware MCI Support as platform device"
>>> @@ -644,7 +636,6 @@ config MMC_DW_K3
>>>       tristate "K3 specific extensions for Synopsys DW Memory Card
>>> Interface"
>>>       depends on MMC_DW
>>>       select MMC_DW_PLTFM
>>> -    select MMC_DW_IDMAC
>>>       help
>>>         This selects support for Hisilicon K3 SoC specific extensions
>>> to the
>>>         Synopsys DesignWare Memory Card Interface driver. Select this
>>> option
>>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c
>>> b/drivers/mmc/host/dw_mmc-pltfm.c
>>> index ec6dbcd..7e1d13b 100644
>>> --- a/drivers/mmc/host/dw_mmc-pltfm.c
>>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
>>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device
>>> *pdev,
>>>       host->pdata = pdev->dev.platform_data;
>>>         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> +    /* Get registers' physical base address */
>>> +    host->phy_regs = (void *)(regs->start);
>>>       host->regs = devm_ioremap_resource(&pdev->dev, regs);
>>>       if (IS_ERR(host->regs))
>>>           return PTR_ERR(host->regs);
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index 40e9d8e..5d6cdff 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -56,7 +56,7 @@
>>>   #define DW_MCI_FREQ_MAX    200000000    /* unit: HZ */
>>>   #define DW_MCI_FREQ_MIN    400000        /* unit: HZ */
>>>   -#ifdef CONFIG_MMC_DW_IDMAC
>>> +
>>>   #define IDMAC_INT_CLR        (SDMMC_IDMAC_INT_AI |
>>> SDMMC_IDMAC_INT_NI | \
>>>                    SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>>>                    SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
>>> @@ -99,7 +99,6 @@ struct idmac_desc {
>>>         __le32        des3;    /* buffer 2 physical address */
>>>   };
>>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>>     static bool dw_mci_reset(struct dw_mci *host);
>>>   static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
>>> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>>>           return DMA_FROM_DEVICE;
>>>   }
>>>   -#ifdef CONFIG_MMC_DW_IDMAC
>>>   static void dw_mci_dma_cleanup(struct dw_mci *host)
>>>   {
>>>       struct mmc_data *data = host->data;
>>> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci
>>> *host)
>>>       mci_writel(host, BMOD, temp);
>>>   }
>>>   -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
>>> +static void dw_mci_dmac_complete_dma(void *arg)
>>>   {
>>> +    struct dw_mci *host = arg;
>> Why changing the argument to void*?
> 
> This function will be used as callback hook of dmaengine, and the
> prototype is
> "typedef void (*dma_async_tx_callback)(void *dma_async_param);".
> w/o this change, we meet a warning  for incompatible pointer case.

Thanks for clarifying.

Best regards,
Krzysztof

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Joachim Eastwood]

Hi Shawn,

On 6 August 2015 at 08:44, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK312x
> platform with edmac mode and RK3288 platform with idmac mode.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>
>         }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       /* Handle DMA interrupts */
> -       if (host->dma_64bit_address == 1) {
> -               pending = mci_readl(host, IDSTS64);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> -               }
> -       } else {
> -               pending = mci_readl(host, IDSTS);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> +       if (host->use_dma == TRANS_MODE_IDMAC) {

Doing:
if (host->use_dma != TRANS_MODE_IDMAC)
    return IRQ_HANDLED;

Could save you the extra level of identation you add below.

> +               /* Handle DMA interrupts */
> +               if (host->dma_64bit_address == 1) {
> +                       pending = mci_readl(host, IDSTS64);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS64,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
> +               } else {
> +                       pending = mci_readl(host, IDSTS);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
>                 }
>         }
> -#endif
>
>         return IRQ_HANDLED;
>  }


> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>  static void dw_mci_init_dma(struct dw_mci *host)
>  {
>         int addr_config;
> +       int trans_mode;
> +       struct device *dev = host->dev;
> +       struct device_node *np = dev->of_node;
> +
> +       /* Check tansfer mode */
> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;

I think it would be nice if you could add some defines for 16 and 0x03
or add a macro like SDMMC_GET_FCNT() that is in dw_mmc.h.

> +       if (trans_mode == 0) {
> +               trans_mode = TRANS_MODE_IDMAC;
> +       } else if (trans_mode == 1 || trans_mode == 2) {
> +               trans_mode = TRANS_MODE_EDMAC;
> +       } else {
> +               trans_mode = TRANS_MODE_PIO;
> +               goto no_dma;
> +       }
> +
>         /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>         addr_config = (mci_readl(host, HCON) >> 27) & 0x01;

I'll try to get this patch tested on my lpc18xx platform soon.
btw, the HCON reg on lpc18xx reads as 0x00e42cc1 (address 0x40004070).


regard,
Joachim Eastwood

[RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Joachim Eastwood]

Hi Shawn,

On 6 August 2015 at 08:44, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK312x
> platform with edmac mode and RK3288 platform with idmac mode.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>
>         }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       /* Handle DMA interrupts */
> -       if (host->dma_64bit_address == 1) {
> -               pending = mci_readl(host, IDSTS64);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> -               }
> -       } else {
> -               pending = mci_readl(host, IDSTS);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> +       if (host->use_dma == TRANS_MODE_IDMAC) {

Doing:
if (host->use_dma != TRANS_MODE_IDMAC)
    return IRQ_HANDLED;

Could save you the extra level of identation you add below.

> +               /* Handle DMA interrupts */
> +               if (host->dma_64bit_address == 1) {
> +                       pending = mci_readl(host, IDSTS64);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS64,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
> +               } else {
> +                       pending = mci_readl(host, IDSTS);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
>                 }
>         }
> -#endif
>
>         return IRQ_HANDLED;
>  }


> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>  static void dw_mci_init_dma(struct dw_mci *host)
>  {
>         int addr_config;
> +       int trans_mode;
> +       struct device *dev = host->dev;
> +       struct device_node *np = dev->of_node;
> +
> +       /* Check tansfer mode */
> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;

I think it would be nice if you could add some defines for 16 and 0x03
or add a macro like SDMMC_GET_FCNT() that is in dw_mmc.h.

> +       if (trans_mode == 0) {
> +               trans_mode = TRANS_MODE_IDMAC;
> +       } else if (trans_mode == 1 || trans_mode == 2) {
> +               trans_mode = TRANS_MODE_EDMAC;
> +       } else {
> +               trans_mode = TRANS_MODE_PIO;
> +               goto no_dma;
> +       }
> +
>         /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>         addr_config = (mci_readl(host, HCON) >> 27) & 0x01;

I'll try to get this patch tested on my lpc18xx platform soon.
btw, the HCON reg on lpc18xx reads as 0x00e42cc1 (address 0x40004070).


regard,
Joachim Eastwood

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Joachim Eastwood]

Hi Shawn,

On 6 August 2015 at 08:44, Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK312x
> platform with edmac mode and RK3288 platform with idmac mode.
>
> Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>
>         }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       /* Handle DMA interrupts */
> -       if (host->dma_64bit_address == 1) {
> -               pending = mci_readl(host, IDSTS64);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> -               }
> -       } else {
> -               pending = mci_readl(host, IDSTS);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> +       if (host->use_dma == TRANS_MODE_IDMAC) {

Doing:
if (host->use_dma != TRANS_MODE_IDMAC)
    return IRQ_HANDLED;

Could save you the extra level of identation you add below.

> +               /* Handle DMA interrupts */
> +               if (host->dma_64bit_address == 1) {
> +                       pending = mci_readl(host, IDSTS64);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS64,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
> +               } else {
> +                       pending = mci_readl(host, IDSTS);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
>                 }
>         }
> -#endif
>
>         return IRQ_HANDLED;
>  }


> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>  static void dw_mci_init_dma(struct dw_mci *host)
>  {
>         int addr_config;
> +       int trans_mode;
> +       struct device *dev = host->dev;
> +       struct device_node *np = dev->of_node;
> +
> +       /* Check tansfer mode */
> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;

I think it would be nice if you could add some defines for 16 and 0x03
or add a macro like SDMMC_GET_FCNT() that is in dw_mmc.h.

> +       if (trans_mode == 0) {
> +               trans_mode = TRANS_MODE_IDMAC;
> +       } else if (trans_mode == 1 || trans_mode == 2) {
> +               trans_mode = TRANS_MODE_EDMAC;
> +       } else {
> +               trans_mode = TRANS_MODE_PIO;
> +               goto no_dma;
> +       }
> +
>         /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>         addr_config = (mci_readl(host, HCON) >> 27) & 0x01;

I'll try to get this patch tested on my lpc18xx platform soon.
btw, the HCON reg on lpc18xx reads as 0x00e42cc1 (address 0x40004070).


regard,
Joachim Eastwood
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Shawn Lin]

在 2015/8/8 5:32, Joachim Eastwood 写道:
> Hi Shawn,
>
> On 6 August 2015 at 08:44, Shawn Lin <shawn.lin@rock-chips.com> wrote:
>> DesignWare MMC Controller can supports two types of DMA
>> mode: external dma and internal dma. We get a RK312x platform
>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>> edmac ops to support these platforms. I've tested it on RK312x
>> platform with edmac mode and RK3288 platform with idmac mode.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>
>> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>>
>>          }
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -       /* Handle DMA interrupts */
>> -       if (host->dma_64bit_address == 1) {
>> -               pending = mci_readl(host, IDSTS64);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> -               }
>> -       } else {
>> -               pending = mci_readl(host, IDSTS);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> +       if (host->use_dma == TRANS_MODE_IDMAC) {
>
> Doing:
> if (host->use_dma != TRANS_MODE_IDMAC)
>      return IRQ_HANDLED;
>

Okay.

> Could save you the extra level of identation you add below.
>
>> +               /* Handle DMA interrupts */
>> +               if (host->dma_64bit_address == 1) {
>> +                       pending = mci_readl(host, IDSTS64);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS64,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>> +               } else {
>> +                       pending = mci_readl(host, IDSTS);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>>                  }
>>          }
>> -#endif
>>
>>          return IRQ_HANDLED;
>>   }
>
>
>> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>>   static void dw_mci_init_dma(struct dw_mci *host)
>>   {
>>          int addr_config;
>> +       int trans_mode;
>> +       struct device *dev = host->dev;
>> +       struct device_node *np = dev->of_node;
>> +
>> +       /* Check tansfer mode */
>> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
>
> I think it would be nice if you could add some defines for 16 and 0x03
> or add a macro like SDMMC_GET_FCNT() that is in dw_mmc.h.
>

yes, it's better to avoid magic number for register operation to make
others understand w/o checking databook for details. And might more than 
one (e.g "Check ADDR_CONFIG bit in HCON to find IDMAC address bus 
width") should be modified.

Although one patch only do one thing, I will drop by to make it in v5.

>> +       if (trans_mode == 0) {
>> +               trans_mode = TRANS_MODE_IDMAC;
>> +       } else if (trans_mode == 1 || trans_mode == 2) {
>> +               trans_mode = TRANS_MODE_EDMAC;
>> +       } else {
>> +               trans_mode = TRANS_MODE_PIO;
>> +               goto no_dma;
>> +       }
>> +
>>          /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>>          addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>
> I'll try to get this patch tested on my lpc18xx platform soon.
> btw, the HCON reg on lpc18xx reads as 0x00e42cc1 (address 0x40004070).
>

yes, HCON[17:16] is 2b'00 means your lpc18xx use IDMAC.

>
> regard,
> Joachim Eastwood
>
>
>


-- 
Shawn Lin

[RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Shawn Lin]

? 2015/8/8 5:32, Joachim Eastwood ??:
> Hi Shawn,
>
> On 6 August 2015 at 08:44, Shawn Lin <shawn.lin@rock-chips.com> wrote:
>> DesignWare MMC Controller can supports two types of DMA
>> mode: external dma and internal dma. We get a RK312x platform
>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>> edmac ops to support these platforms. I've tested it on RK312x
>> platform with edmac mode and RK3288 platform with idmac mode.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>
>> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>>
>>          }
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -       /* Handle DMA interrupts */
>> -       if (host->dma_64bit_address == 1) {
>> -               pending = mci_readl(host, IDSTS64);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> -               }
>> -       } else {
>> -               pending = mci_readl(host, IDSTS);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> +       if (host->use_dma == TRANS_MODE_IDMAC) {
>
> Doing:
> if (host->use_dma != TRANS_MODE_IDMAC)
>      return IRQ_HANDLED;
>

Okay.

> Could save you the extra level of identation you add below.
>
>> +               /* Handle DMA interrupts */
>> +               if (host->dma_64bit_address == 1) {
>> +                       pending = mci_readl(host, IDSTS64);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS64,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>> +               } else {
>> +                       pending = mci_readl(host, IDSTS);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>>                  }
>>          }
>> -#endif
>>
>>          return IRQ_HANDLED;
>>   }
>
>
>> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>>   static void dw_mci_init_dma(struct dw_mci *host)
>>   {
>>          int addr_config;
>> +       int trans_mode;
>> +       struct device *dev = host->dev;
>> +       struct device_node *np = dev->of_node;
>> +
>> +       /* Check tansfer mode */
>> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
>
> I think it would be nice if you could add some defines for 16 and 0x03
> or add a macro like SDMMC_GET_FCNT() that is in dw_mmc.h.
>

yes, it's better to avoid magic number for register operation to make
others understand w/o checking databook for details. And might more than 
one (e.g "Check ADDR_CONFIG bit in HCON to find IDMAC address bus 
width") should be modified.

Although one patch only do one thing, I will drop by to make it in v5.

>> +       if (trans_mode == 0) {
>> +               trans_mode = TRANS_MODE_IDMAC;
>> +       } else if (trans_mode == 1 || trans_mode == 2) {
>> +               trans_mode = TRANS_MODE_EDMAC;
>> +       } else {
>> +               trans_mode = TRANS_MODE_PIO;
>> +               goto no_dma;
>> +       }
>> +
>>          /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>>          addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>
> I'll try to get this patch tested on my lpc18xx platform soon.
> btw, the HCON reg on lpc18xx reads as 0x00e42cc1 (address 0x40004070).
>

yes, HCON[17:16] is 2b'00 means your lpc18xx use IDMAC.

>
> regard,
> Joachim Eastwood
>
>
>


-- 
Shawn Lin

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Shawn Lin]

在 2015/8/8 5:32, Joachim Eastwood 写道:
> Hi Shawn,
>
> On 6 August 2015 at 08:44, Shawn Lin <shawn.lin@rock-chips.com> wrote:
>> DesignWare MMC Controller can supports two types of DMA
>> mode: external dma and internal dma. We get a RK312x platform
>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>> edmac ops to support these platforms. I've tested it on RK312x
>> platform with edmac mode and RK3288 platform with idmac mode.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>
>> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>>
>>          }
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -       /* Handle DMA interrupts */
>> -       if (host->dma_64bit_address == 1) {
>> -               pending = mci_readl(host, IDSTS64);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> -               }
>> -       } else {
>> -               pending = mci_readl(host, IDSTS);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> +       if (host->use_dma == TRANS_MODE_IDMAC) {
>
> Doing:
> if (host->use_dma != TRANS_MODE_IDMAC)
>      return IRQ_HANDLED;
>

Okay.

> Could save you the extra level of identation you add below.
>
>> +               /* Handle DMA interrupts */
>> +               if (host->dma_64bit_address == 1) {
>> +                       pending = mci_readl(host, IDSTS64);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS64,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>> +               } else {
>> +                       pending = mci_readl(host, IDSTS);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>>                  }
>>          }
>> -#endif
>>
>>          return IRQ_HANDLED;
>>   }
>
>
>> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>>   static void dw_mci_init_dma(struct dw_mci *host)
>>   {
>>          int addr_config;
>> +       int trans_mode;
>> +       struct device *dev = host->dev;
>> +       struct device_node *np = dev->of_node;
>> +
>> +       /* Check tansfer mode */
>> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
>
> I think it would be nice if you could add some defines for 16 and 0x03
> or add a macro like SDMMC_GET_FCNT() that is in dw_mmc.h.
>

yes, it's better to avoid magic number for register operation to make
others understand w/o checking databook for details. And might more than 
one (e.g "Check ADDR_CONFIG bit in HCON to find IDMAC address bus 
width") should be modified.

Although one patch only do one thing, I will drop by to make it in v5.

>> +       if (trans_mode == 0) {
>> +               trans_mode = TRANS_MODE_IDMAC;
>> +       } else if (trans_mode == 1 || trans_mode == 2) {
>> +               trans_mode = TRANS_MODE_EDMAC;
>> +       } else {
>> +               trans_mode = TRANS_MODE_PIO;
>> +               goto no_dma;
>> +       }
>> +
>>          /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>>          addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>
> I'll try to get this patch tested on my lpc18xx platform soon.
> btw, the HCON reg on lpc18xx reads as 0x00e42cc1 (address 0x40004070).
>

yes, HCON[17:16] is 2b'00 means your lpc18xx use IDMAC.

>
> regard,
> Joachim Eastwood
>
>
>


-- 
Shawn Lin

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Alim Akhtar]

Hi Shawn

On Thu, Aug 6, 2015 at 12:14 PM, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK312x
> platform with edmac mode and RK3288 platform with idmac mode.
>
Just curious to know if their are any performance (read/write)
difference with Idmac and edmac?

> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>
> ---
>
> Changes in v4:
> - remove "host->trans_mode" and use "host->use_dma" to indicate
>   transfer mode.
> - remove all bt-bindings' changes since we don't need new properities.
> - check transfer mode at runtime by reading HCON reg
> - spilt defconfig changes for each sub-architecture
> - fix the title of cover letter
> - reuse some code for reducing code size
>
> Changes in v3:
> - choose transfer mode at runtime
> - remove all CONFIG_MMC_DW_IDMAC config option
> - add supports-idmac property for some platforms
>
> Changes in v2:
> - Fix typo of dev_info msg
> - remove unused dmach from declaration of dw_mci_dma_slave
>
>  drivers/mmc/host/Kconfig        |  11 +-
>  drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>  drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
>  include/linux/mmc/dw_mmc.h      |  27 ++++-
>  4 files changed, 232 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 6a0f9c7..a86c0eb 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -607,15 +607,7 @@ config MMC_DW
>         help
>           This selects support for the Synopsys DesignWare Mobile Storage IP
>           block, this provides host support for SD and MMC interfaces, in both
> -         PIO and external DMA modes.
> -
> -config MMC_DW_IDMAC
> -       bool "Internal DMAC interface"
> -       depends on MMC_DW
> -       help
> -         This selects support for the internal DMAC block within the Synopsys
> -         Designware Mobile Storage IP block. This disables the external DMA
> -         interface.
> +         PIO, internal DMA mode and external DMA modes.
>
>  config MMC_DW_PLTFM
>         tristate "Synopsys Designware MCI Support as platform device"
> @@ -644,7 +636,6 @@ config MMC_DW_K3
>         tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>         depends on MMC_DW
>         select MMC_DW_PLTFM
> -       select MMC_DW_IDMAC
>         help
>           This selects support for Hisilicon K3 SoC specific extensions to the
>           Synopsys DesignWare Memory Card Interface driver. Select this option
> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
> index ec6dbcd..7e1d13b 100644
> --- a/drivers/mmc/host/dw_mmc-pltfm.c
> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>         host->pdata = pdev->dev.platform_data;
>
>         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       /* Get registers' physical base address */
> +       host->phy_regs = (void *)(regs->start);
>         host->regs = devm_ioremap_resource(&pdev->dev, regs);
>         if (IS_ERR(host->regs))
>                 return PTR_ERR(host->regs);
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 40e9d8e..5d6cdff 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -56,7 +56,7 @@
>  #define DW_MCI_FREQ_MAX        200000000       /* unit: HZ */
>  #define DW_MCI_FREQ_MIN        400000          /* unit: HZ */
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> +
>  #define IDMAC_INT_CLR          (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>                                  SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>                                  SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
> @@ -99,7 +99,6 @@ struct idmac_desc {
>
>         __le32          des3;   /* buffer 2 physical address */
>  };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>
>  static bool dw_mci_reset(struct dw_mci *host);
>  static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>                 return DMA_FROM_DEVICE;
>  }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
>  static void dw_mci_dma_cleanup(struct dw_mci *host)
>  {
>         struct mmc_data *data = host->data;
> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>         mci_writel(host, BMOD, temp);
>  }
>
> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
> +static void dw_mci_dmac_complete_dma(void *arg)
>  {
> +       struct dw_mci *host = arg;
>         struct mmc_data *data = host->data;
>
>         dev_vdbg(host->dev, "DMA complete\n");
>
> +       if (host->use_dma == TRANS_MODE_EDMAC)
> +               if (data && (data->flags & MMC_DATA_READ))
> +                       /* Invalidate cache after read */
> +                       dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
> +                                           data->sg,
> +                                           data->sg_len,
> +                                           DMA_FROM_DEVICE);
> +
>         host->dma_ops->cleanup(host);
>
>         /*
> @@ -527,7 +534,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
>         wmb();
>  }
>
> -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
> +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>  {
>         u32 temp;
>
> @@ -551,6 +558,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>
>         /* Start it running */
>         mci_writel(host, PLDMND, 1);
> +
> +       return 0;
>  }
>
>  static int dw_mci_idmac_init(struct dw_mci *host)
> @@ -629,10 +638,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
>         .init = dw_mci_idmac_init,
>         .start = dw_mci_idmac_start_dma,
>         .stop = dw_mci_idmac_stop_dma,
> -       .complete = dw_mci_idmac_complete_dma,
> +       .complete = dw_mci_dmac_complete_dma,
> +       .cleanup = dw_mci_dma_cleanup,
> +};
> +
> +static void dw_mci_edmac_stop_dma(struct dw_mci *host)
> +{
> +       dmaengine_terminate_all(host->dms->ch);
> +}
> +
> +static int dw_mci_edmac_start_dma(struct dw_mci *host,
> +                                           unsigned int sg_len)
> +{
> +       struct dma_slave_config cfg;
> +       struct dma_async_tx_descriptor *desc = NULL;
> +       struct scatterlist *sgl = host->data->sg;
> +       const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
> +       u32 sg_elems = host->data->sg_len;
> +       u32 fifoth_val;
> +       u32 fifo_offset = host->fifo_reg - host->regs;
> +       int ret = 0;
> +
> +       /* Set external dma config: burst size, burst width */
> +       cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
> +       cfg.src_addr = cfg.dst_addr;
> +       cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +       cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +
> +       /* Match burst msize with external dma config */
> +       fifoth_val = mci_readl(host, FIFOTH);
> +       cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
> +       cfg.src_maxburst = cfg.dst_maxburst;
> +
> +       if (host->data->flags & MMC_DATA_WRITE)
> +               cfg.direction = DMA_MEM_TO_DEV;
> +       else /* MMC_DATA_READ */
> +               cfg.direction = DMA_DEV_TO_MEM;
> +
> +       ret = dmaengine_slave_config(host->dms->ch, &cfg);
> +       if (ret) {
> +               dev_err(host->dev, "Failed to config edmac.\n");
> +               return -EBUSY;
> +       }
> +
> +       desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
> +                                      sg_len, cfg.direction,
> +                                      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> +       if (!desc) {
> +               dev_err(host->dev, "Can't prepare slave sg.\n");
> +               return -EBUSY;
> +       }
> +
> +       /* Set dw_mci_edmac_complete_dma as callback */
> +       desc->callback = dw_mci_dmac_complete_dma;
> +       desc->callback_param = (void *)host;
> +       dmaengine_submit(desc);
> +
> +       /* Flush cache before write */
> +       if (host->data->flags & MMC_DATA_WRITE)
> +               dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
> +                                      sg_elems, DMA_TO_DEVICE);
> +
> +       dma_async_issue_pending(host->dms->ch);
> +
> +       return 0;
> +}
> +
> +static int dw_mci_edmac_init(struct dw_mci *host)
> +{
> +       /* Request external dma channel */
> +       host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
> +       if (!host->dms)
> +               return -ENOMEM;
> +
> +       host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
> +       if (!host->dms->ch) {
> +               dev_err(host->dev,
> +                       "Failed to get external DMA channel %d\n",
> +                       host->dms->ch->chan_id);
> +               kfree(host->dms);
> +               host->dms = NULL;
> +               return -ENXIO;
> +       }
> +
> +       return 0;
> +}
> +
> +static void dw_mci_edmac_exit(struct dw_mci *host)
> +{
> +       if (host->dms) {
> +               if (host->dms->ch) {
> +                       dma_release_channel(host->dms->ch);
> +                       host->dms->ch = NULL;
> +               }
> +               kfree(host->dms);
> +               host->dms = NULL;
> +       }
> +}
> +
> +static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
> +       .init = dw_mci_edmac_init,
> +       .exit = dw_mci_edmac_exit,
> +       .start = dw_mci_edmac_start_dma,
> +       .stop = dw_mci_edmac_stop_dma,
> +       .complete = dw_mci_dmac_complete_dma,
>         .cleanup = dw_mci_dma_cleanup,
>  };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>
>  static int dw_mci_pre_dma_transfer(struct dw_mci *host,
>                                    struct mmc_data *data,
> @@ -712,7 +823,6 @@ static void dw_mci_post_req(struct mmc_host *mmc,
>
>  static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>  {
> -#ifdef CONFIG_MMC_DW_IDMAC
>         unsigned int blksz = data->blksz;
>         const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>         u32 fifo_width = 1 << host->data_shift;
> @@ -720,6 +830,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>         u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
>         int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
>
> +       /* pio should ship this scenario */
> +       if (!host->use_dma)
> +               return;
> +
>         tx_wmark = (host->fifo_depth) / 2;
>         tx_wmark_invers = host->fifo_depth - tx_wmark;
>
> @@ -748,7 +862,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>  done:
>         fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
>         mci_writel(host, FIFOTH, fifoth_val);
> -#endif
>  }
>
>  static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
> @@ -835,7 +948,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>         mci_writel(host, INTMASK, temp);
>         spin_unlock_irqrestore(&host->irq_lock, irqflags);
>
> -       host->dma_ops->start(host, sg_len);
> +       if (host->dma_ops->start(host, sg_len)) {
> +               /* We can't do DMA */
> +               dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
> +               return -ENODEV;
> +       }
>
>         return 0;
>  }
> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>
>         }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       /* Handle DMA interrupts */
> -       if (host->dma_64bit_address == 1) {
> -               pending = mci_readl(host, IDSTS64);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> -               }
> -       } else {
> -               pending = mci_readl(host, IDSTS);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> +       if (host->use_dma == TRANS_MODE_IDMAC) {
> +               /* Handle DMA interrupts */
> +               if (host->dma_64bit_address == 1) {
> +                       pending = mci_readl(host, IDSTS64);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS64,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
> +               } else {
> +                       pending = mci_readl(host, IDSTS);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
>                 }
>         }
> -#endif
>
>         return IRQ_HANDLED;
>  }
> @@ -2391,19 +2512,28 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>                 mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
>         } else {
>                 /* Useful defaults if platform data is unset. */
> -#ifdef CONFIG_MMC_DW_IDMAC
> -               mmc->max_segs = host->ring_size;
> -               mmc->max_blk_size = 65536;
> -               mmc->max_seg_size = 0x1000;
> -               mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> -               mmc->max_blk_count = mmc->max_req_size / 512;
> -#else
> -               mmc->max_segs = 64;
> -               mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> -               mmc->max_blk_count = 512;
> -               mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
> -               mmc->max_seg_size = mmc->max_req_size;
> -#endif /* CONFIG_MMC_DW_IDMAC */
> +               if (host->use_dma == TRANS_MODE_IDMAC) {
> +                       mmc->max_segs = host->ring_size;
> +                       mmc->max_blk_size = 65536;
> +                       mmc->max_seg_size = 0x1000;
> +                       mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> +                       mmc->max_blk_count = mmc->max_req_size / 512;
> +               } else if (host->use_dma == TRANS_MODE_EDMAC) {
> +                       mmc->max_segs = 64;
> +                       mmc->max_blk_size = 65536;
> +                       mmc->max_blk_count = 65535;
> +                       mmc->max_req_size =
> +                                       mmc->max_blk_size * mmc->max_blk_count;
> +                       mmc->max_seg_size = mmc->max_req_size;
> +               } else {
> +                       /* TRANS_MODE_PIO */
> +                       mmc->max_segs = 64;
> +                       mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> +                       mmc->max_blk_count = 512;
> +                       mmc->max_req_size =
> +                                       mmc->max_blk_size * mmc->max_blk_count;
> +                       mmc->max_seg_size = mmc->max_req_size;
> +               }
>         }
>
>         if (dw_mci_get_cd(mmc))
> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>  static void dw_mci_init_dma(struct dw_mci *host)
>  {
>         int addr_config;
> +       int trans_mode;
> +       struct device *dev = host->dev;
> +       struct device_node *np = dev->of_node;
> +
> +       /* Check tansfer mode */
> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
> +       if (trans_mode == 0) {
> +               trans_mode = TRANS_MODE_IDMAC;
> +       } else if (trans_mode == 1 || trans_mode == 2) {
> +               trans_mode = TRANS_MODE_EDMAC;
> +       } else {
> +               trans_mode = TRANS_MODE_PIO;
> +               goto no_dma;
> +       }
> +
>         /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>         addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>
> @@ -2462,10 +2607,19 @@ static void dw_mci_init_dma(struct dw_mci *host)
>         }
>
>         /* Determine which DMA interface to use */
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       host->dma_ops = &dw_mci_idmac_ops;
> -       dev_info(host->dev, "Using internal DMA controller.\n");
> -#endif
> +       if (trans_mode == TRANS_MODE_IDMAC) {
> +               host->dma_ops = &dw_mci_idmac_ops;
> +               dev_info(host->dev, "Using internal DMA controller.\n");
> +       } else {
> +               /* TRANS_MODE_EDMAC: check dma bindings again */
> +               if ((of_property_count_strings(np, "dma-names") < 0) ||
> +                   (!of_find_property(np, "dmas", NULL))) {
> +                       trans_mode = TRANS_MODE_PIO;
> +                       goto no_dma;
> +               }
> +               host->dma_ops = &dw_mci_edmac_ops;
> +               dev_info(host->dev, "Using external DMA controller.\n");
> +       }
>
>         if (!host->dma_ops)
>                 goto no_dma;
> @@ -2482,12 +2636,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
>                 goto no_dma;
>         }
>
> -       host->use_dma = 1;
> +       host->use_dma = trans_mode;
>         return;
>
>  no_dma:
>         dev_info(host->dev, "Using PIO mode.\n");
> -       host->use_dma = 0;
> +       host->use_dma = trans_mode;
>         return;
>  }
>
> @@ -2570,10 +2724,9 @@ static bool dw_mci_reset(struct dw_mci *host)
>                 }
>         }
>
> -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
> -       /* It is also recommended that we reset and reprogram idmac */
> -       dw_mci_idmac_reset(host);
> -#endif
> +       if (host->use_dma == TRANS_MODE_IDMAC)
> +               /* It is also recommended that we reset and reprogram idmac */
> +               dw_mci_idmac_reset(host);
>
>         ret = true;
>
> @@ -2958,6 +3111,9 @@ EXPORT_SYMBOL(dw_mci_remove);
>   */
>  int dw_mci_suspend(struct dw_mci *host)
>  {
> +       if (host->use_dma && host->dma_ops->exit)
> +               host->dma_ops->exit(host);
> +
>         return 0;
>  }
>  EXPORT_SYMBOL(dw_mci_suspend);
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 5be9767..9ed6257 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -16,6 +16,7 @@
>
>  #include <linux/scatterlist.h>
>  #include <linux/mmc/core.h>
> +#include <linux/dmaengine.h>
>
>  #define MAX_MCI_SLOTS  2
>
> @@ -40,6 +41,17 @@ enum {
>
>  struct mmc_data;
>
> +enum {
> +       TRANS_MODE_PIO = 0,
> +       TRANS_MODE_IDMAC,
> +       TRANS_MODE_EDMAC
> +};
> +
> +struct dw_mci_dma_slave {
> +       struct dma_chan *ch;
> +       enum dma_transfer_direction direction;
> +};
> +
>  /**
>   * struct dw_mci - MMC controller state shared between all slots
>   * @lock: Spinlock protecting the queue and associated data.
> @@ -153,11 +165,16 @@ struct dw_mci {
>         dma_addr_t              sg_dma;
>         void                    *sg_cpu;
>         const struct dw_mci_dma_ops     *dma_ops;
> -#ifdef CONFIG_MMC_DW_IDMAC
> +       /* For idmac */
>         unsigned int            ring_size;
> -#else
> +
> +       /* For edmac */
> +       struct dw_mci_dma_slave *dms;
> +       /* Registers's physical base address */
> +       void                    *phy_regs;
> +
>         struct dw_mci_dma_data  *dma_data;
> -#endif
> +
>         u32                     cmd_status;
>         u32                     data_status;
>         u32                     stop_cmdr;
> @@ -210,8 +227,8 @@ struct dw_mci {
>  struct dw_mci_dma_ops {
>         /* DMA Ops */
>         int (*init)(struct dw_mci *host);
> -       void (*start)(struct dw_mci *host, unsigned int sg_len);
> -       void (*complete)(struct dw_mci *host);
> +       int (*start)(struct dw_mci *host, unsigned int sg_len);
> +       void (*complete)(void *host);
>         void (*stop)(struct dw_mci *host);
>         void (*cleanup)(struct dw_mci *host);
>         void (*exit)(struct dw_mci *host);
> --
> 2.3.7
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Regards,
Alim

[RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Alim Akhtar]

Hi Shawn

On Thu, Aug 6, 2015 at 12:14 PM, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK312x
> platform with edmac mode and RK3288 platform with idmac mode.
>
Just curious to know if their are any performance (read/write)
difference with Idmac and edmac?

> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>
> ---
>
> Changes in v4:
> - remove "host->trans_mode" and use "host->use_dma" to indicate
>   transfer mode.
> - remove all bt-bindings' changes since we don't need new properities.
> - check transfer mode at runtime by reading HCON reg
> - spilt defconfig changes for each sub-architecture
> - fix the title of cover letter
> - reuse some code for reducing code size
>
> Changes in v3:
> - choose transfer mode at runtime
> - remove all CONFIG_MMC_DW_IDMAC config option
> - add supports-idmac property for some platforms
>
> Changes in v2:
> - Fix typo of dev_info msg
> - remove unused dmach from declaration of dw_mci_dma_slave
>
>  drivers/mmc/host/Kconfig        |  11 +-
>  drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>  drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
>  include/linux/mmc/dw_mmc.h      |  27 ++++-
>  4 files changed, 232 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 6a0f9c7..a86c0eb 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -607,15 +607,7 @@ config MMC_DW
>         help
>           This selects support for the Synopsys DesignWare Mobile Storage IP
>           block, this provides host support for SD and MMC interfaces, in both
> -         PIO and external DMA modes.
> -
> -config MMC_DW_IDMAC
> -       bool "Internal DMAC interface"
> -       depends on MMC_DW
> -       help
> -         This selects support for the internal DMAC block within the Synopsys
> -         Designware Mobile Storage IP block. This disables the external DMA
> -         interface.
> +         PIO, internal DMA mode and external DMA modes.
>
>  config MMC_DW_PLTFM
>         tristate "Synopsys Designware MCI Support as platform device"
> @@ -644,7 +636,6 @@ config MMC_DW_K3
>         tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>         depends on MMC_DW
>         select MMC_DW_PLTFM
> -       select MMC_DW_IDMAC
>         help
>           This selects support for Hisilicon K3 SoC specific extensions to the
>           Synopsys DesignWare Memory Card Interface driver. Select this option
> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
> index ec6dbcd..7e1d13b 100644
> --- a/drivers/mmc/host/dw_mmc-pltfm.c
> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>         host->pdata = pdev->dev.platform_data;
>
>         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       /* Get registers' physical base address */
> +       host->phy_regs = (void *)(regs->start);
>         host->regs = devm_ioremap_resource(&pdev->dev, regs);
>         if (IS_ERR(host->regs))
>                 return PTR_ERR(host->regs);
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 40e9d8e..5d6cdff 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -56,7 +56,7 @@
>  #define DW_MCI_FREQ_MAX        200000000       /* unit: HZ */
>  #define DW_MCI_FREQ_MIN        400000          /* unit: HZ */
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> +
>  #define IDMAC_INT_CLR          (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>                                  SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>                                  SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
> @@ -99,7 +99,6 @@ struct idmac_desc {
>
>         __le32          des3;   /* buffer 2 physical address */
>  };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>
>  static bool dw_mci_reset(struct dw_mci *host);
>  static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>                 return DMA_FROM_DEVICE;
>  }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
>  static void dw_mci_dma_cleanup(struct dw_mci *host)
>  {
>         struct mmc_data *data = host->data;
> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>         mci_writel(host, BMOD, temp);
>  }
>
> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
> +static void dw_mci_dmac_complete_dma(void *arg)
>  {
> +       struct dw_mci *host = arg;
>         struct mmc_data *data = host->data;
>
>         dev_vdbg(host->dev, "DMA complete\n");
>
> +       if (host->use_dma == TRANS_MODE_EDMAC)
> +               if (data && (data->flags & MMC_DATA_READ))
> +                       /* Invalidate cache after read */
> +                       dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
> +                                           data->sg,
> +                                           data->sg_len,
> +                                           DMA_FROM_DEVICE);
> +
>         host->dma_ops->cleanup(host);
>
>         /*
> @@ -527,7 +534,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
>         wmb();
>  }
>
> -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
> +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>  {
>         u32 temp;
>
> @@ -551,6 +558,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>
>         /* Start it running */
>         mci_writel(host, PLDMND, 1);
> +
> +       return 0;
>  }
>
>  static int dw_mci_idmac_init(struct dw_mci *host)
> @@ -629,10 +638,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
>         .init = dw_mci_idmac_init,
>         .start = dw_mci_idmac_start_dma,
>         .stop = dw_mci_idmac_stop_dma,
> -       .complete = dw_mci_idmac_complete_dma,
> +       .complete = dw_mci_dmac_complete_dma,
> +       .cleanup = dw_mci_dma_cleanup,
> +};
> +
> +static void dw_mci_edmac_stop_dma(struct dw_mci *host)
> +{
> +       dmaengine_terminate_all(host->dms->ch);
> +}
> +
> +static int dw_mci_edmac_start_dma(struct dw_mci *host,
> +                                           unsigned int sg_len)
> +{
> +       struct dma_slave_config cfg;
> +       struct dma_async_tx_descriptor *desc = NULL;
> +       struct scatterlist *sgl = host->data->sg;
> +       const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
> +       u32 sg_elems = host->data->sg_len;
> +       u32 fifoth_val;
> +       u32 fifo_offset = host->fifo_reg - host->regs;
> +       int ret = 0;
> +
> +       /* Set external dma config: burst size, burst width */
> +       cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
> +       cfg.src_addr = cfg.dst_addr;
> +       cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +       cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +
> +       /* Match burst msize with external dma config */
> +       fifoth_val = mci_readl(host, FIFOTH);
> +       cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
> +       cfg.src_maxburst = cfg.dst_maxburst;
> +
> +       if (host->data->flags & MMC_DATA_WRITE)
> +               cfg.direction = DMA_MEM_TO_DEV;
> +       else /* MMC_DATA_READ */
> +               cfg.direction = DMA_DEV_TO_MEM;
> +
> +       ret = dmaengine_slave_config(host->dms->ch, &cfg);
> +       if (ret) {
> +               dev_err(host->dev, "Failed to config edmac.\n");
> +               return -EBUSY;
> +       }
> +
> +       desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
> +                                      sg_len, cfg.direction,
> +                                      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> +       if (!desc) {
> +               dev_err(host->dev, "Can't prepare slave sg.\n");
> +               return -EBUSY;
> +       }
> +
> +       /* Set dw_mci_edmac_complete_dma as callback */
> +       desc->callback = dw_mci_dmac_complete_dma;
> +       desc->callback_param = (void *)host;
> +       dmaengine_submit(desc);
> +
> +       /* Flush cache before write */
> +       if (host->data->flags & MMC_DATA_WRITE)
> +               dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
> +                                      sg_elems, DMA_TO_DEVICE);
> +
> +       dma_async_issue_pending(host->dms->ch);
> +
> +       return 0;
> +}
> +
> +static int dw_mci_edmac_init(struct dw_mci *host)
> +{
> +       /* Request external dma channel */
> +       host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
> +       if (!host->dms)
> +               return -ENOMEM;
> +
> +       host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
> +       if (!host->dms->ch) {
> +               dev_err(host->dev,
> +                       "Failed to get external DMA channel %d\n",
> +                       host->dms->ch->chan_id);
> +               kfree(host->dms);
> +               host->dms = NULL;
> +               return -ENXIO;
> +       }
> +
> +       return 0;
> +}
> +
> +static void dw_mci_edmac_exit(struct dw_mci *host)
> +{
> +       if (host->dms) {
> +               if (host->dms->ch) {
> +                       dma_release_channel(host->dms->ch);
> +                       host->dms->ch = NULL;
> +               }
> +               kfree(host->dms);
> +               host->dms = NULL;
> +       }
> +}
> +
> +static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
> +       .init = dw_mci_edmac_init,
> +       .exit = dw_mci_edmac_exit,
> +       .start = dw_mci_edmac_start_dma,
> +       .stop = dw_mci_edmac_stop_dma,
> +       .complete = dw_mci_dmac_complete_dma,
>         .cleanup = dw_mci_dma_cleanup,
>  };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>
>  static int dw_mci_pre_dma_transfer(struct dw_mci *host,
>                                    struct mmc_data *data,
> @@ -712,7 +823,6 @@ static void dw_mci_post_req(struct mmc_host *mmc,
>
>  static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>  {
> -#ifdef CONFIG_MMC_DW_IDMAC
>         unsigned int blksz = data->blksz;
>         const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>         u32 fifo_width = 1 << host->data_shift;
> @@ -720,6 +830,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>         u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
>         int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
>
> +       /* pio should ship this scenario */
> +       if (!host->use_dma)
> +               return;
> +
>         tx_wmark = (host->fifo_depth) / 2;
>         tx_wmark_invers = host->fifo_depth - tx_wmark;
>
> @@ -748,7 +862,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>  done:
>         fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
>         mci_writel(host, FIFOTH, fifoth_val);
> -#endif
>  }
>
>  static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
> @@ -835,7 +948,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>         mci_writel(host, INTMASK, temp);
>         spin_unlock_irqrestore(&host->irq_lock, irqflags);
>
> -       host->dma_ops->start(host, sg_len);
> +       if (host->dma_ops->start(host, sg_len)) {
> +               /* We can't do DMA */
> +               dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
> +               return -ENODEV;
> +       }
>
>         return 0;
>  }
> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>
>         }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       /* Handle DMA interrupts */
> -       if (host->dma_64bit_address == 1) {
> -               pending = mci_readl(host, IDSTS64);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> -               }
> -       } else {
> -               pending = mci_readl(host, IDSTS);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> +       if (host->use_dma == TRANS_MODE_IDMAC) {
> +               /* Handle DMA interrupts */
> +               if (host->dma_64bit_address == 1) {
> +                       pending = mci_readl(host, IDSTS64);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS64,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
> +               } else {
> +                       pending = mci_readl(host, IDSTS);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
>                 }
>         }
> -#endif
>
>         return IRQ_HANDLED;
>  }
> @@ -2391,19 +2512,28 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>                 mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
>         } else {
>                 /* Useful defaults if platform data is unset. */
> -#ifdef CONFIG_MMC_DW_IDMAC
> -               mmc->max_segs = host->ring_size;
> -               mmc->max_blk_size = 65536;
> -               mmc->max_seg_size = 0x1000;
> -               mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> -               mmc->max_blk_count = mmc->max_req_size / 512;
> -#else
> -               mmc->max_segs = 64;
> -               mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> -               mmc->max_blk_count = 512;
> -               mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
> -               mmc->max_seg_size = mmc->max_req_size;
> -#endif /* CONFIG_MMC_DW_IDMAC */
> +               if (host->use_dma == TRANS_MODE_IDMAC) {
> +                       mmc->max_segs = host->ring_size;
> +                       mmc->max_blk_size = 65536;
> +                       mmc->max_seg_size = 0x1000;
> +                       mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> +                       mmc->max_blk_count = mmc->max_req_size / 512;
> +               } else if (host->use_dma == TRANS_MODE_EDMAC) {
> +                       mmc->max_segs = 64;
> +                       mmc->max_blk_size = 65536;
> +                       mmc->max_blk_count = 65535;
> +                       mmc->max_req_size =
> +                                       mmc->max_blk_size * mmc->max_blk_count;
> +                       mmc->max_seg_size = mmc->max_req_size;
> +               } else {
> +                       /* TRANS_MODE_PIO */
> +                       mmc->max_segs = 64;
> +                       mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> +                       mmc->max_blk_count = 512;
> +                       mmc->max_req_size =
> +                                       mmc->max_blk_size * mmc->max_blk_count;
> +                       mmc->max_seg_size = mmc->max_req_size;
> +               }
>         }
>
>         if (dw_mci_get_cd(mmc))
> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>  static void dw_mci_init_dma(struct dw_mci *host)
>  {
>         int addr_config;
> +       int trans_mode;
> +       struct device *dev = host->dev;
> +       struct device_node *np = dev->of_node;
> +
> +       /* Check tansfer mode */
> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
> +       if (trans_mode == 0) {
> +               trans_mode = TRANS_MODE_IDMAC;
> +       } else if (trans_mode == 1 || trans_mode == 2) {
> +               trans_mode = TRANS_MODE_EDMAC;
> +       } else {
> +               trans_mode = TRANS_MODE_PIO;
> +               goto no_dma;
> +       }
> +
>         /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>         addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>
> @@ -2462,10 +2607,19 @@ static void dw_mci_init_dma(struct dw_mci *host)
>         }
>
>         /* Determine which DMA interface to use */
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       host->dma_ops = &dw_mci_idmac_ops;
> -       dev_info(host->dev, "Using internal DMA controller.\n");
> -#endif
> +       if (trans_mode == TRANS_MODE_IDMAC) {
> +               host->dma_ops = &dw_mci_idmac_ops;
> +               dev_info(host->dev, "Using internal DMA controller.\n");
> +       } else {
> +               /* TRANS_MODE_EDMAC: check dma bindings again */
> +               if ((of_property_count_strings(np, "dma-names") < 0) ||
> +                   (!of_find_property(np, "dmas", NULL))) {
> +                       trans_mode = TRANS_MODE_PIO;
> +                       goto no_dma;
> +               }
> +               host->dma_ops = &dw_mci_edmac_ops;
> +               dev_info(host->dev, "Using external DMA controller.\n");
> +       }
>
>         if (!host->dma_ops)
>                 goto no_dma;
> @@ -2482,12 +2636,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
>                 goto no_dma;
>         }
>
> -       host->use_dma = 1;
> +       host->use_dma = trans_mode;
>         return;
>
>  no_dma:
>         dev_info(host->dev, "Using PIO mode.\n");
> -       host->use_dma = 0;
> +       host->use_dma = trans_mode;
>         return;
>  }
>
> @@ -2570,10 +2724,9 @@ static bool dw_mci_reset(struct dw_mci *host)
>                 }
>         }
>
> -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
> -       /* It is also recommended that we reset and reprogram idmac */
> -       dw_mci_idmac_reset(host);
> -#endif
> +       if (host->use_dma == TRANS_MODE_IDMAC)
> +               /* It is also recommended that we reset and reprogram idmac */
> +               dw_mci_idmac_reset(host);
>
>         ret = true;
>
> @@ -2958,6 +3111,9 @@ EXPORT_SYMBOL(dw_mci_remove);
>   */
>  int dw_mci_suspend(struct dw_mci *host)
>  {
> +       if (host->use_dma && host->dma_ops->exit)
> +               host->dma_ops->exit(host);
> +
>         return 0;
>  }
>  EXPORT_SYMBOL(dw_mci_suspend);
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 5be9767..9ed6257 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -16,6 +16,7 @@
>
>  #include <linux/scatterlist.h>
>  #include <linux/mmc/core.h>
> +#include <linux/dmaengine.h>
>
>  #define MAX_MCI_SLOTS  2
>
> @@ -40,6 +41,17 @@ enum {
>
>  struct mmc_data;
>
> +enum {
> +       TRANS_MODE_PIO = 0,
> +       TRANS_MODE_IDMAC,
> +       TRANS_MODE_EDMAC
> +};
> +
> +struct dw_mci_dma_slave {
> +       struct dma_chan *ch;
> +       enum dma_transfer_direction direction;
> +};
> +
>  /**
>   * struct dw_mci - MMC controller state shared between all slots
>   * @lock: Spinlock protecting the queue and associated data.
> @@ -153,11 +165,16 @@ struct dw_mci {
>         dma_addr_t              sg_dma;
>         void                    *sg_cpu;
>         const struct dw_mci_dma_ops     *dma_ops;
> -#ifdef CONFIG_MMC_DW_IDMAC
> +       /* For idmac */
>         unsigned int            ring_size;
> -#else
> +
> +       /* For edmac */
> +       struct dw_mci_dma_slave *dms;
> +       /* Registers's physical base address */
> +       void                    *phy_regs;
> +
>         struct dw_mci_dma_data  *dma_data;
> -#endif
> +
>         u32                     cmd_status;
>         u32                     data_status;
>         u32                     stop_cmdr;
> @@ -210,8 +227,8 @@ struct dw_mci {
>  struct dw_mci_dma_ops {
>         /* DMA Ops */
>         int (*init)(struct dw_mci *host);
> -       void (*start)(struct dw_mci *host, unsigned int sg_len);
> -       void (*complete)(struct dw_mci *host);
> +       int (*start)(struct dw_mci *host, unsigned int sg_len);
> +       void (*complete)(void *host);
>         void (*stop)(struct dw_mci *host);
>         void (*cleanup)(struct dw_mci *host);
>         void (*exit)(struct dw_mci *host);
> --
> 2.3.7
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Regards,
Alim

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Alim Akhtar]

Hi Shawn

On Thu, Aug 6, 2015 at 12:14 PM, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK312x
> platform with edmac mode and RK3288 platform with idmac mode.
>
Just curious to know if their are any performance (read/write)
difference with Idmac and edmac?

> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>
> ---
>
> Changes in v4:
> - remove "host->trans_mode" and use "host->use_dma" to indicate
>   transfer mode.
> - remove all bt-bindings' changes since we don't need new properities.
> - check transfer mode at runtime by reading HCON reg
> - spilt defconfig changes for each sub-architecture
> - fix the title of cover letter
> - reuse some code for reducing code size
>
> Changes in v3:
> - choose transfer mode at runtime
> - remove all CONFIG_MMC_DW_IDMAC config option
> - add supports-idmac property for some platforms
>
> Changes in v2:
> - Fix typo of dev_info msg
> - remove unused dmach from declaration of dw_mci_dma_slave
>
>  drivers/mmc/host/Kconfig        |  11 +-
>  drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>  drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
>  include/linux/mmc/dw_mmc.h      |  27 ++++-
>  4 files changed, 232 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 6a0f9c7..a86c0eb 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -607,15 +607,7 @@ config MMC_DW
>         help
>           This selects support for the Synopsys DesignWare Mobile Storage IP
>           block, this provides host support for SD and MMC interfaces, in both
> -         PIO and external DMA modes.
> -
> -config MMC_DW_IDMAC
> -       bool "Internal DMAC interface"
> -       depends on MMC_DW
> -       help
> -         This selects support for the internal DMAC block within the Synopsys
> -         Designware Mobile Storage IP block. This disables the external DMA
> -         interface.
> +         PIO, internal DMA mode and external DMA modes.
>
>  config MMC_DW_PLTFM
>         tristate "Synopsys Designware MCI Support as platform device"
> @@ -644,7 +636,6 @@ config MMC_DW_K3
>         tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>         depends on MMC_DW
>         select MMC_DW_PLTFM
> -       select MMC_DW_IDMAC
>         help
>           This selects support for Hisilicon K3 SoC specific extensions to the
>           Synopsys DesignWare Memory Card Interface driver. Select this option
> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
> index ec6dbcd..7e1d13b 100644
> --- a/drivers/mmc/host/dw_mmc-pltfm.c
> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>         host->pdata = pdev->dev.platform_data;
>
>         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       /* Get registers' physical base address */
> +       host->phy_regs = (void *)(regs->start);
>         host->regs = devm_ioremap_resource(&pdev->dev, regs);
>         if (IS_ERR(host->regs))
>                 return PTR_ERR(host->regs);
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 40e9d8e..5d6cdff 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -56,7 +56,7 @@
>  #define DW_MCI_FREQ_MAX        200000000       /* unit: HZ */
>  #define DW_MCI_FREQ_MIN        400000          /* unit: HZ */
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> +
>  #define IDMAC_INT_CLR          (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>                                  SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>                                  SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
> @@ -99,7 +99,6 @@ struct idmac_desc {
>
>         __le32          des3;   /* buffer 2 physical address */
>  };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>
>  static bool dw_mci_reset(struct dw_mci *host);
>  static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>                 return DMA_FROM_DEVICE;
>  }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
>  static void dw_mci_dma_cleanup(struct dw_mci *host)
>  {
>         struct mmc_data *data = host->data;
> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>         mci_writel(host, BMOD, temp);
>  }
>
> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
> +static void dw_mci_dmac_complete_dma(void *arg)
>  {
> +       struct dw_mci *host = arg;
>         struct mmc_data *data = host->data;
>
>         dev_vdbg(host->dev, "DMA complete\n");
>
> +       if (host->use_dma == TRANS_MODE_EDMAC)
> +               if (data && (data->flags & MMC_DATA_READ))
> +                       /* Invalidate cache after read */
> +                       dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
> +                                           data->sg,
> +                                           data->sg_len,
> +                                           DMA_FROM_DEVICE);
> +
>         host->dma_ops->cleanup(host);
>
>         /*
> @@ -527,7 +534,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
>         wmb();
>  }
>
> -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
> +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>  {
>         u32 temp;
>
> @@ -551,6 +558,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>
>         /* Start it running */
>         mci_writel(host, PLDMND, 1);
> +
> +       return 0;
>  }
>
>  static int dw_mci_idmac_init(struct dw_mci *host)
> @@ -629,10 +638,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
>         .init = dw_mci_idmac_init,
>         .start = dw_mci_idmac_start_dma,
>         .stop = dw_mci_idmac_stop_dma,
> -       .complete = dw_mci_idmac_complete_dma,
> +       .complete = dw_mci_dmac_complete_dma,
> +       .cleanup = dw_mci_dma_cleanup,
> +};
> +
> +static void dw_mci_edmac_stop_dma(struct dw_mci *host)
> +{
> +       dmaengine_terminate_all(host->dms->ch);
> +}
> +
> +static int dw_mci_edmac_start_dma(struct dw_mci *host,
> +                                           unsigned int sg_len)
> +{
> +       struct dma_slave_config cfg;
> +       struct dma_async_tx_descriptor *desc = NULL;
> +       struct scatterlist *sgl = host->data->sg;
> +       const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
> +       u32 sg_elems = host->data->sg_len;
> +       u32 fifoth_val;
> +       u32 fifo_offset = host->fifo_reg - host->regs;
> +       int ret = 0;
> +
> +       /* Set external dma config: burst size, burst width */
> +       cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
> +       cfg.src_addr = cfg.dst_addr;
> +       cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +       cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +
> +       /* Match burst msize with external dma config */
> +       fifoth_val = mci_readl(host, FIFOTH);
> +       cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
> +       cfg.src_maxburst = cfg.dst_maxburst;
> +
> +       if (host->data->flags & MMC_DATA_WRITE)
> +               cfg.direction = DMA_MEM_TO_DEV;
> +       else /* MMC_DATA_READ */
> +               cfg.direction = DMA_DEV_TO_MEM;
> +
> +       ret = dmaengine_slave_config(host->dms->ch, &cfg);
> +       if (ret) {
> +               dev_err(host->dev, "Failed to config edmac.\n");
> +               return -EBUSY;
> +       }
> +
> +       desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
> +                                      sg_len, cfg.direction,
> +                                      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> +       if (!desc) {
> +               dev_err(host->dev, "Can't prepare slave sg.\n");
> +               return -EBUSY;
> +       }
> +
> +       /* Set dw_mci_edmac_complete_dma as callback */
> +       desc->callback = dw_mci_dmac_complete_dma;
> +       desc->callback_param = (void *)host;
> +       dmaengine_submit(desc);
> +
> +       /* Flush cache before write */
> +       if (host->data->flags & MMC_DATA_WRITE)
> +               dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
> +                                      sg_elems, DMA_TO_DEVICE);
> +
> +       dma_async_issue_pending(host->dms->ch);
> +
> +       return 0;
> +}
> +
> +static int dw_mci_edmac_init(struct dw_mci *host)
> +{
> +       /* Request external dma channel */
> +       host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
> +       if (!host->dms)
> +               return -ENOMEM;
> +
> +       host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
> +       if (!host->dms->ch) {
> +               dev_err(host->dev,
> +                       "Failed to get external DMA channel %d\n",
> +                       host->dms->ch->chan_id);
> +               kfree(host->dms);
> +               host->dms = NULL;
> +               return -ENXIO;
> +       }
> +
> +       return 0;
> +}
> +
> +static void dw_mci_edmac_exit(struct dw_mci *host)
> +{
> +       if (host->dms) {
> +               if (host->dms->ch) {
> +                       dma_release_channel(host->dms->ch);
> +                       host->dms->ch = NULL;
> +               }
> +               kfree(host->dms);
> +               host->dms = NULL;
> +       }
> +}
> +
> +static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
> +       .init = dw_mci_edmac_init,
> +       .exit = dw_mci_edmac_exit,
> +       .start = dw_mci_edmac_start_dma,
> +       .stop = dw_mci_edmac_stop_dma,
> +       .complete = dw_mci_dmac_complete_dma,
>         .cleanup = dw_mci_dma_cleanup,
>  };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>
>  static int dw_mci_pre_dma_transfer(struct dw_mci *host,
>                                    struct mmc_data *data,
> @@ -712,7 +823,6 @@ static void dw_mci_post_req(struct mmc_host *mmc,
>
>  static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>  {
> -#ifdef CONFIG_MMC_DW_IDMAC
>         unsigned int blksz = data->blksz;
>         const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>         u32 fifo_width = 1 << host->data_shift;
> @@ -720,6 +830,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>         u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
>         int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
>
> +       /* pio should ship this scenario */
> +       if (!host->use_dma)
> +               return;
> +
>         tx_wmark = (host->fifo_depth) / 2;
>         tx_wmark_invers = host->fifo_depth - tx_wmark;
>
> @@ -748,7 +862,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>  done:
>         fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
>         mci_writel(host, FIFOTH, fifoth_val);
> -#endif
>  }
>
>  static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
> @@ -835,7 +948,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>         mci_writel(host, INTMASK, temp);
>         spin_unlock_irqrestore(&host->irq_lock, irqflags);
>
> -       host->dma_ops->start(host, sg_len);
> +       if (host->dma_ops->start(host, sg_len)) {
> +               /* We can't do DMA */
> +               dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
> +               return -ENODEV;
> +       }
>
>         return 0;
>  }
> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>
>         }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       /* Handle DMA interrupts */
> -       if (host->dma_64bit_address == 1) {
> -               pending = mci_readl(host, IDSTS64);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> -               }
> -       } else {
> -               pending = mci_readl(host, IDSTS);
> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
> -                                                       SDMMC_IDMAC_INT_RI);
> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> -                       host->dma_ops->complete(host);
> +       if (host->use_dma == TRANS_MODE_IDMAC) {
> +               /* Handle DMA interrupts */
> +               if (host->dma_64bit_address == 1) {
> +                       pending = mci_readl(host, IDSTS64);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS64,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
> +               } else {
> +                       pending = mci_readl(host, IDSTS);
> +                       if (pending & (SDMMC_IDMAC_INT_TI |
> +                                      SDMMC_IDMAC_INT_RI)) {
> +                               mci_writel(host, IDSTS,
> +                                          SDMMC_IDMAC_INT_TI |
> +                                          SDMMC_IDMAC_INT_RI);
> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> +                               host->dma_ops->complete((void *)host);
> +                       }
>                 }
>         }
> -#endif
>
>         return IRQ_HANDLED;
>  }
> @@ -2391,19 +2512,28 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>                 mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
>         } else {
>                 /* Useful defaults if platform data is unset. */
> -#ifdef CONFIG_MMC_DW_IDMAC
> -               mmc->max_segs = host->ring_size;
> -               mmc->max_blk_size = 65536;
> -               mmc->max_seg_size = 0x1000;
> -               mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> -               mmc->max_blk_count = mmc->max_req_size / 512;
> -#else
> -               mmc->max_segs = 64;
> -               mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> -               mmc->max_blk_count = 512;
> -               mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
> -               mmc->max_seg_size = mmc->max_req_size;
> -#endif /* CONFIG_MMC_DW_IDMAC */
> +               if (host->use_dma == TRANS_MODE_IDMAC) {
> +                       mmc->max_segs = host->ring_size;
> +                       mmc->max_blk_size = 65536;
> +                       mmc->max_seg_size = 0x1000;
> +                       mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> +                       mmc->max_blk_count = mmc->max_req_size / 512;
> +               } else if (host->use_dma == TRANS_MODE_EDMAC) {
> +                       mmc->max_segs = 64;
> +                       mmc->max_blk_size = 65536;
> +                       mmc->max_blk_count = 65535;
> +                       mmc->max_req_size =
> +                                       mmc->max_blk_size * mmc->max_blk_count;
> +                       mmc->max_seg_size = mmc->max_req_size;
> +               } else {
> +                       /* TRANS_MODE_PIO */
> +                       mmc->max_segs = 64;
> +                       mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> +                       mmc->max_blk_count = 512;
> +                       mmc->max_req_size =
> +                                       mmc->max_blk_size * mmc->max_blk_count;
> +                       mmc->max_seg_size = mmc->max_req_size;
> +               }
>         }
>
>         if (dw_mci_get_cd(mmc))
> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>  static void dw_mci_init_dma(struct dw_mci *host)
>  {
>         int addr_config;
> +       int trans_mode;
> +       struct device *dev = host->dev;
> +       struct device_node *np = dev->of_node;
> +
> +       /* Check tansfer mode */
> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
> +       if (trans_mode == 0) {
> +               trans_mode = TRANS_MODE_IDMAC;
> +       } else if (trans_mode == 1 || trans_mode == 2) {
> +               trans_mode = TRANS_MODE_EDMAC;
> +       } else {
> +               trans_mode = TRANS_MODE_PIO;
> +               goto no_dma;
> +       }
> +
>         /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>         addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>
> @@ -2462,10 +2607,19 @@ static void dw_mci_init_dma(struct dw_mci *host)
>         }
>
>         /* Determine which DMA interface to use */
> -#ifdef CONFIG_MMC_DW_IDMAC
> -       host->dma_ops = &dw_mci_idmac_ops;
> -       dev_info(host->dev, "Using internal DMA controller.\n");
> -#endif
> +       if (trans_mode == TRANS_MODE_IDMAC) {
> +               host->dma_ops = &dw_mci_idmac_ops;
> +               dev_info(host->dev, "Using internal DMA controller.\n");
> +       } else {
> +               /* TRANS_MODE_EDMAC: check dma bindings again */
> +               if ((of_property_count_strings(np, "dma-names") < 0) ||
> +                   (!of_find_property(np, "dmas", NULL))) {
> +                       trans_mode = TRANS_MODE_PIO;
> +                       goto no_dma;
> +               }
> +               host->dma_ops = &dw_mci_edmac_ops;
> +               dev_info(host->dev, "Using external DMA controller.\n");
> +       }
>
>         if (!host->dma_ops)
>                 goto no_dma;
> @@ -2482,12 +2636,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
>                 goto no_dma;
>         }
>
> -       host->use_dma = 1;
> +       host->use_dma = trans_mode;
>         return;
>
>  no_dma:
>         dev_info(host->dev, "Using PIO mode.\n");
> -       host->use_dma = 0;
> +       host->use_dma = trans_mode;
>         return;
>  }
>
> @@ -2570,10 +2724,9 @@ static bool dw_mci_reset(struct dw_mci *host)
>                 }
>         }
>
> -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
> -       /* It is also recommended that we reset and reprogram idmac */
> -       dw_mci_idmac_reset(host);
> -#endif
> +       if (host->use_dma == TRANS_MODE_IDMAC)
> +               /* It is also recommended that we reset and reprogram idmac */
> +               dw_mci_idmac_reset(host);
>
>         ret = true;
>
> @@ -2958,6 +3111,9 @@ EXPORT_SYMBOL(dw_mci_remove);
>   */
>  int dw_mci_suspend(struct dw_mci *host)
>  {
> +       if (host->use_dma && host->dma_ops->exit)
> +               host->dma_ops->exit(host);
> +
>         return 0;
>  }
>  EXPORT_SYMBOL(dw_mci_suspend);
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 5be9767..9ed6257 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -16,6 +16,7 @@
>
>  #include <linux/scatterlist.h>
>  #include <linux/mmc/core.h>
> +#include <linux/dmaengine.h>
>
>  #define MAX_MCI_SLOTS  2
>
> @@ -40,6 +41,17 @@ enum {
>
>  struct mmc_data;
>
> +enum {
> +       TRANS_MODE_PIO = 0,
> +       TRANS_MODE_IDMAC,
> +       TRANS_MODE_EDMAC
> +};
> +
> +struct dw_mci_dma_slave {
> +       struct dma_chan *ch;
> +       enum dma_transfer_direction direction;
> +};
> +
>  /**
>   * struct dw_mci - MMC controller state shared between all slots
>   * @lock: Spinlock protecting the queue and associated data.
> @@ -153,11 +165,16 @@ struct dw_mci {
>         dma_addr_t              sg_dma;
>         void                    *sg_cpu;
>         const struct dw_mci_dma_ops     *dma_ops;
> -#ifdef CONFIG_MMC_DW_IDMAC
> +       /* For idmac */
>         unsigned int            ring_size;
> -#else
> +
> +       /* For edmac */
> +       struct dw_mci_dma_slave *dms;
> +       /* Registers's physical base address */
> +       void                    *phy_regs;
> +
>         struct dw_mci_dma_data  *dma_data;
> -#endif
> +
>         u32                     cmd_status;
>         u32                     data_status;
>         u32                     stop_cmdr;
> @@ -210,8 +227,8 @@ struct dw_mci {
>  struct dw_mci_dma_ops {
>         /* DMA Ops */
>         int (*init)(struct dw_mci *host);
> -       void (*start)(struct dw_mci *host, unsigned int sg_len);
> -       void (*complete)(struct dw_mci *host);
> +       int (*start)(struct dw_mci *host, unsigned int sg_len);
> +       void (*complete)(void *host);
>         void (*stop)(struct dw_mci *host);
>         void (*cleanup)(struct dw_mci *host);
>         void (*exit)(struct dw_mci *host);
> --
> 2.3.7
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Regards,
Alim

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Shawn Lin]

在 2015/8/11 2:03, Alim Akhtar 写道:
> Hi Shawn
>
> On Thu, Aug 6, 2015 at 12:14 PM, Shawn Lin <shawn.lin@rock-chips.com> wrote:
>> DesignWare MMC Controller can supports two types of DMA
>> mode: external dma and internal dma. We get a RK312x platform
>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>> edmac ops to support these platforms. I've tested it on RK312x
>> platform with edmac mode and RK3288 platform with idmac mode.
>>
> Just curious to know if their are any performance (read/write)
> difference with Idmac and edmac?
>

yes, actually the performance with edmac is worse than that does with 
idmac since other peripheral blocks(e.g:I2C/uart/i2s etc.) share generic 
DMA with it that means dw_mmc has to compete with them to request the 
free channel and be shceduled if generic DMA is busy.

>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>>
>> ---
>>
>> Changes in v4:
>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>    transfer mode.
>> - remove all bt-bindings' changes since we don't need new properities.
>> - check transfer mode at runtime by reading HCON reg
>> - spilt defconfig changes for each sub-architecture
>> - fix the title of cover letter
>> - reuse some code for reducing code size
>>
>> Changes in v3:
>> - choose transfer mode at runtime
>> - remove all CONFIG_MMC_DW_IDMAC config option
>> - add supports-idmac property for some platforms
>>
>> Changes in v2:
>> - Fix typo of dev_info msg
>> - remove unused dmach from declaration of dw_mci_dma_slave
>>
>>   drivers/mmc/host/Kconfig        |  11 +-
>>   drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>>   drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
>>   include/linux/mmc/dw_mmc.h      |  27 ++++-
>>   4 files changed, 232 insertions(+), 66 deletions(-)
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>> index 6a0f9c7..a86c0eb 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -607,15 +607,7 @@ config MMC_DW
>>          help
>>            This selects support for the Synopsys DesignWare Mobile Storage IP
>>            block, this provides host support for SD and MMC interfaces, in both
>> -         PIO and external DMA modes.
>> -
>> -config MMC_DW_IDMAC
>> -       bool "Internal DMAC interface"
>> -       depends on MMC_DW
>> -       help
>> -         This selects support for the internal DMAC block within the Synopsys
>> -         Designware Mobile Storage IP block. This disables the external DMA
>> -         interface.
>> +         PIO, internal DMA mode and external DMA modes.
>>
>>   config MMC_DW_PLTFM
>>          tristate "Synopsys Designware MCI Support as platform device"
>> @@ -644,7 +636,6 @@ config MMC_DW_K3
>>          tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>>          depends on MMC_DW
>>          select MMC_DW_PLTFM
>> -       select MMC_DW_IDMAC
>>          help
>>            This selects support for Hisilicon K3 SoC specific extensions to the
>>            Synopsys DesignWare Memory Card Interface driver. Select this option
>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
>> index ec6dbcd..7e1d13b 100644
>> --- a/drivers/mmc/host/dw_mmc-pltfm.c
>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>>          host->pdata = pdev->dev.platform_data;
>>
>>          regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       /* Get registers' physical base address */
>> +       host->phy_regs = (void *)(regs->start);
>>          host->regs = devm_ioremap_resource(&pdev->dev, regs);
>>          if (IS_ERR(host->regs))
>>                  return PTR_ERR(host->regs);
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 40e9d8e..5d6cdff 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -56,7 +56,7 @@
>>   #define DW_MCI_FREQ_MAX        200000000       /* unit: HZ */
>>   #define DW_MCI_FREQ_MIN        400000          /* unit: HZ */
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> +
>>   #define IDMAC_INT_CLR          (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>>                                   SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>>                                   SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
>> @@ -99,7 +99,6 @@ struct idmac_desc {
>>
>>          __le32          des3;   /* buffer 2 physical address */
>>   };
>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>
>>   static bool dw_mci_reset(struct dw_mci *host);
>>   static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
>> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>>                  return DMA_FROM_DEVICE;
>>   }
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>>   static void dw_mci_dma_cleanup(struct dw_mci *host)
>>   {
>>          struct mmc_data *data = host->data;
>> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>>          mci_writel(host, BMOD, temp);
>>   }
>>
>> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
>> +static void dw_mci_dmac_complete_dma(void *arg)
>>   {
>> +       struct dw_mci *host = arg;
>>          struct mmc_data *data = host->data;
>>
>>          dev_vdbg(host->dev, "DMA complete\n");
>>
>> +       if (host->use_dma == TRANS_MODE_EDMAC)
>> +               if (data && (data->flags & MMC_DATA_READ))
>> +                       /* Invalidate cache after read */
>> +                       dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
>> +                                           data->sg,
>> +                                           data->sg_len,
>> +                                           DMA_FROM_DEVICE);
>> +
>>          host->dma_ops->cleanup(host);
>>
>>          /*
>> @@ -527,7 +534,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
>>          wmb();
>>   }
>>
>> -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>> +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>   {
>>          u32 temp;
>>
>> @@ -551,6 +558,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>
>>          /* Start it running */
>>          mci_writel(host, PLDMND, 1);
>> +
>> +       return 0;
>>   }
>>
>>   static int dw_mci_idmac_init(struct dw_mci *host)
>> @@ -629,10 +638,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
>>          .init = dw_mci_idmac_init,
>>          .start = dw_mci_idmac_start_dma,
>>          .stop = dw_mci_idmac_stop_dma,
>> -       .complete = dw_mci_idmac_complete_dma,
>> +       .complete = dw_mci_dmac_complete_dma,
>> +       .cleanup = dw_mci_dma_cleanup,
>> +};
>> +
>> +static void dw_mci_edmac_stop_dma(struct dw_mci *host)
>> +{
>> +       dmaengine_terminate_all(host->dms->ch);
>> +}
>> +
>> +static int dw_mci_edmac_start_dma(struct dw_mci *host,
>> +                                           unsigned int sg_len)
>> +{
>> +       struct dma_slave_config cfg;
>> +       struct dma_async_tx_descriptor *desc = NULL;
>> +       struct scatterlist *sgl = host->data->sg;
>> +       const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>> +       u32 sg_elems = host->data->sg_len;
>> +       u32 fifoth_val;
>> +       u32 fifo_offset = host->fifo_reg - host->regs;
>> +       int ret = 0;
>> +
>> +       /* Set external dma config: burst size, burst width */
>> +       cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
>> +       cfg.src_addr = cfg.dst_addr;
>> +       cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> +       cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> +
>> +       /* Match burst msize with external dma config */
>> +       fifoth_val = mci_readl(host, FIFOTH);
>> +       cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
>> +       cfg.src_maxburst = cfg.dst_maxburst;
>> +
>> +       if (host->data->flags & MMC_DATA_WRITE)
>> +               cfg.direction = DMA_MEM_TO_DEV;
>> +       else /* MMC_DATA_READ */
>> +               cfg.direction = DMA_DEV_TO_MEM;
>> +
>> +       ret = dmaengine_slave_config(host->dms->ch, &cfg);
>> +       if (ret) {
>> +               dev_err(host->dev, "Failed to config edmac.\n");
>> +               return -EBUSY;
>> +       }
>> +
>> +       desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
>> +                                      sg_len, cfg.direction,
>> +                                      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
>> +       if (!desc) {
>> +               dev_err(host->dev, "Can't prepare slave sg.\n");
>> +               return -EBUSY;
>> +       }
>> +
>> +       /* Set dw_mci_edmac_complete_dma as callback */
>> +       desc->callback = dw_mci_dmac_complete_dma;
>> +       desc->callback_param = (void *)host;
>> +       dmaengine_submit(desc);
>> +
>> +       /* Flush cache before write */
>> +       if (host->data->flags & MMC_DATA_WRITE)
>> +               dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
>> +                                      sg_elems, DMA_TO_DEVICE);
>> +
>> +       dma_async_issue_pending(host->dms->ch);
>> +
>> +       return 0;
>> +}
>> +
>> +static int dw_mci_edmac_init(struct dw_mci *host)
>> +{
>> +       /* Request external dma channel */
>> +       host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
>> +       if (!host->dms)
>> +               return -ENOMEM;
>> +
>> +       host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
>> +       if (!host->dms->ch) {
>> +               dev_err(host->dev,
>> +                       "Failed to get external DMA channel %d\n",
>> +                       host->dms->ch->chan_id);
>> +               kfree(host->dms);
>> +               host->dms = NULL;
>> +               return -ENXIO;
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static void dw_mci_edmac_exit(struct dw_mci *host)
>> +{
>> +       if (host->dms) {
>> +               if (host->dms->ch) {
>> +                       dma_release_channel(host->dms->ch);
>> +                       host->dms->ch = NULL;
>> +               }
>> +               kfree(host->dms);
>> +               host->dms = NULL;
>> +       }
>> +}
>> +
>> +static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
>> +       .init = dw_mci_edmac_init,
>> +       .exit = dw_mci_edmac_exit,
>> +       .start = dw_mci_edmac_start_dma,
>> +       .stop = dw_mci_edmac_stop_dma,
>> +       .complete = dw_mci_dmac_complete_dma,
>>          .cleanup = dw_mci_dma_cleanup,
>>   };
>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>
>>   static int dw_mci_pre_dma_transfer(struct dw_mci *host,
>>                                     struct mmc_data *data,
>> @@ -712,7 +823,6 @@ static void dw_mci_post_req(struct mmc_host *mmc,
>>
>>   static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>   {
>> -#ifdef CONFIG_MMC_DW_IDMAC
>>          unsigned int blksz = data->blksz;
>>          const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>>          u32 fifo_width = 1 << host->data_shift;
>> @@ -720,6 +830,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>          u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
>>          int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
>>
>> +       /* pio should ship this scenario */
>> +       if (!host->use_dma)
>> +               return;
>> +
>>          tx_wmark = (host->fifo_depth) / 2;
>>          tx_wmark_invers = host->fifo_depth - tx_wmark;
>>
>> @@ -748,7 +862,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>   done:
>>          fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
>>          mci_writel(host, FIFOTH, fifoth_val);
>> -#endif
>>   }
>>
>>   static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
>> @@ -835,7 +948,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>>          mci_writel(host, INTMASK, temp);
>>          spin_unlock_irqrestore(&host->irq_lock, irqflags);
>>
>> -       host->dma_ops->start(host, sg_len);
>> +       if (host->dma_ops->start(host, sg_len)) {
>> +               /* We can't do DMA */
>> +               dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
>> +               return -ENODEV;
>> +       }
>>
>>          return 0;
>>   }
>> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>>
>>          }
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -       /* Handle DMA interrupts */
>> -       if (host->dma_64bit_address == 1) {
>> -               pending = mci_readl(host, IDSTS64);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> -               }
>> -       } else {
>> -               pending = mci_readl(host, IDSTS);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> +       if (host->use_dma == TRANS_MODE_IDMAC) {
>> +               /* Handle DMA interrupts */
>> +               if (host->dma_64bit_address == 1) {
>> +                       pending = mci_readl(host, IDSTS64);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS64,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>> +               } else {
>> +                       pending = mci_readl(host, IDSTS);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>>                  }
>>          }
>> -#endif
>>
>>          return IRQ_HANDLED;
>>   }
>> @@ -2391,19 +2512,28 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>>                  mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
>>          } else {
>>                  /* Useful defaults if platform data is unset. */
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -               mmc->max_segs = host->ring_size;
>> -               mmc->max_blk_size = 65536;
>> -               mmc->max_seg_size = 0x1000;
>> -               mmc->max_req_size = mmc->max_seg_size * host->ring_size;
>> -               mmc->max_blk_count = mmc->max_req_size / 512;
>> -#else
>> -               mmc->max_segs = 64;
>> -               mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
>> -               mmc->max_blk_count = 512;
>> -               mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
>> -               mmc->max_seg_size = mmc->max_req_size;
>> -#endif /* CONFIG_MMC_DW_IDMAC */
>> +               if (host->use_dma == TRANS_MODE_IDMAC) {
>> +                       mmc->max_segs = host->ring_size;
>> +                       mmc->max_blk_size = 65536;
>> +                       mmc->max_seg_size = 0x1000;
>> +                       mmc->max_req_size = mmc->max_seg_size * host->ring_size;
>> +                       mmc->max_blk_count = mmc->max_req_size / 512;
>> +               } else if (host->use_dma == TRANS_MODE_EDMAC) {
>> +                       mmc->max_segs = 64;
>> +                       mmc->max_blk_size = 65536;
>> +                       mmc->max_blk_count = 65535;
>> +                       mmc->max_req_size =
>> +                                       mmc->max_blk_size * mmc->max_blk_count;
>> +                       mmc->max_seg_size = mmc->max_req_size;
>> +               } else {
>> +                       /* TRANS_MODE_PIO */
>> +                       mmc->max_segs = 64;
>> +                       mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
>> +                       mmc->max_blk_count = 512;
>> +                       mmc->max_req_size =
>> +                                       mmc->max_blk_size * mmc->max_blk_count;
>> +                       mmc->max_seg_size = mmc->max_req_size;
>> +               }
>>          }
>>
>>          if (dw_mci_get_cd(mmc))
>> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>>   static void dw_mci_init_dma(struct dw_mci *host)
>>   {
>>          int addr_config;
>> +       int trans_mode;
>> +       struct device *dev = host->dev;
>> +       struct device_node *np = dev->of_node;
>> +
>> +       /* Check tansfer mode */
>> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
>> +       if (trans_mode == 0) {
>> +               trans_mode = TRANS_MODE_IDMAC;
>> +       } else if (trans_mode == 1 || trans_mode == 2) {
>> +               trans_mode = TRANS_MODE_EDMAC;
>> +       } else {
>> +               trans_mode = TRANS_MODE_PIO;
>> +               goto no_dma;
>> +       }
>> +
>>          /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>>          addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>>
>> @@ -2462,10 +2607,19 @@ static void dw_mci_init_dma(struct dw_mci *host)
>>          }
>>
>>          /* Determine which DMA interface to use */
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -       host->dma_ops = &dw_mci_idmac_ops;
>> -       dev_info(host->dev, "Using internal DMA controller.\n");
>> -#endif
>> +       if (trans_mode == TRANS_MODE_IDMAC) {
>> +               host->dma_ops = &dw_mci_idmac_ops;
>> +               dev_info(host->dev, "Using internal DMA controller.\n");
>> +       } else {
>> +               /* TRANS_MODE_EDMAC: check dma bindings again */
>> +               if ((of_property_count_strings(np, "dma-names") < 0) ||
>> +                   (!of_find_property(np, "dmas", NULL))) {
>> +                       trans_mode = TRANS_MODE_PIO;
>> +                       goto no_dma;
>> +               }
>> +               host->dma_ops = &dw_mci_edmac_ops;
>> +               dev_info(host->dev, "Using external DMA controller.\n");
>> +       }
>>
>>          if (!host->dma_ops)
>>                  goto no_dma;
>> @@ -2482,12 +2636,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
>>                  goto no_dma;
>>          }
>>
>> -       host->use_dma = 1;
>> +       host->use_dma = trans_mode;
>>          return;
>>
>>   no_dma:
>>          dev_info(host->dev, "Using PIO mode.\n");
>> -       host->use_dma = 0;
>> +       host->use_dma = trans_mode;
>>          return;
>>   }
>>
>> @@ -2570,10 +2724,9 @@ static bool dw_mci_reset(struct dw_mci *host)
>>                  }
>>          }
>>
>> -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
>> -       /* It is also recommended that we reset and reprogram idmac */
>> -       dw_mci_idmac_reset(host);
>> -#endif
>> +       if (host->use_dma == TRANS_MODE_IDMAC)
>> +               /* It is also recommended that we reset and reprogram idmac */
>> +               dw_mci_idmac_reset(host);
>>
>>          ret = true;
>>
>> @@ -2958,6 +3111,9 @@ EXPORT_SYMBOL(dw_mci_remove);
>>    */
>>   int dw_mci_suspend(struct dw_mci *host)
>>   {
>> +       if (host->use_dma && host->dma_ops->exit)
>> +               host->dma_ops->exit(host);
>> +
>>          return 0;
>>   }
>>   EXPORT_SYMBOL(dw_mci_suspend);
>> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
>> index 5be9767..9ed6257 100644
>> --- a/include/linux/mmc/dw_mmc.h
>> +++ b/include/linux/mmc/dw_mmc.h
>> @@ -16,6 +16,7 @@
>>
>>   #include <linux/scatterlist.h>
>>   #include <linux/mmc/core.h>
>> +#include <linux/dmaengine.h>
>>
>>   #define MAX_MCI_SLOTS  2
>>
>> @@ -40,6 +41,17 @@ enum {
>>
>>   struct mmc_data;
>>
>> +enum {
>> +       TRANS_MODE_PIO = 0,
>> +       TRANS_MODE_IDMAC,
>> +       TRANS_MODE_EDMAC
>> +};
>> +
>> +struct dw_mci_dma_slave {
>> +       struct dma_chan *ch;
>> +       enum dma_transfer_direction direction;
>> +};
>> +
>>   /**
>>    * struct dw_mci - MMC controller state shared between all slots
>>    * @lock: Spinlock protecting the queue and associated data.
>> @@ -153,11 +165,16 @@ struct dw_mci {
>>          dma_addr_t              sg_dma;
>>          void                    *sg_cpu;
>>          const struct dw_mci_dma_ops     *dma_ops;
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> +       /* For idmac */
>>          unsigned int            ring_size;
>> -#else
>> +
>> +       /* For edmac */
>> +       struct dw_mci_dma_slave *dms;
>> +       /* Registers's physical base address */
>> +       void                    *phy_regs;
>> +
>>          struct dw_mci_dma_data  *dma_data;
>> -#endif
>> +
>>          u32                     cmd_status;
>>          u32                     data_status;
>>          u32                     stop_cmdr;
>> @@ -210,8 +227,8 @@ struct dw_mci {
>>   struct dw_mci_dma_ops {
>>          /* DMA Ops */
>>          int (*init)(struct dw_mci *host);
>> -       void (*start)(struct dw_mci *host, unsigned int sg_len);
>> -       void (*complete)(struct dw_mci *host);
>> +       int (*start)(struct dw_mci *host, unsigned int sg_len);
>> +       void (*complete)(void *host);
>>          void (*stop)(struct dw_mci *host);
>>          void (*cleanup)(struct dw_mci *host);
>>          void (*exit)(struct dw_mci *host);
>> --
>> 2.3.7
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
>


-- 
Shawn Lin

Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Shawn Lin]

在 2015/8/11 2:03, Alim Akhtar 写道:
> Hi Shawn
>
> On Thu, Aug 6, 2015 at 12:14 PM, Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
>> DesignWare MMC Controller can supports two types of DMA
>> mode: external dma and internal dma. We get a RK312x platform
>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>> edmac ops to support these platforms. I've tested it on RK312x
>> platform with edmac mode and RK3288 platform with idmac mode.
>>
> Just curious to know if their are any performance (read/write)
> difference with Idmac and edmac?
>

yes, actually the performance with edmac is worse than that does with 
idmac since other peripheral blocks(e.g:I2C/uart/i2s etc.) share generic 
DMA with it that means dw_mmc has to compete with them to request the 
free channel and be shceduled if generic DMA is busy.

>> Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>
>> ---
>>
>> Changes in v4:
>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>    transfer mode.
>> - remove all bt-bindings' changes since we don't need new properities.
>> - check transfer mode at runtime by reading HCON reg
>> - spilt defconfig changes for each sub-architecture
>> - fix the title of cover letter
>> - reuse some code for reducing code size
>>
>> Changes in v3:
>> - choose transfer mode at runtime
>> - remove all CONFIG_MMC_DW_IDMAC config option
>> - add supports-idmac property for some platforms
>>
>> Changes in v2:
>> - Fix typo of dev_info msg
>> - remove unused dmach from declaration of dw_mci_dma_slave
>>
>>   drivers/mmc/host/Kconfig        |  11 +-
>>   drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>>   drivers/mmc/host/dw_mmc.c       | 258 ++++++++++++++++++++++++++++++++--------
>>   include/linux/mmc/dw_mmc.h      |  27 ++++-
>>   4 files changed, 232 insertions(+), 66 deletions(-)
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>> index 6a0f9c7..a86c0eb 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -607,15 +607,7 @@ config MMC_DW
>>          help
>>            This selects support for the Synopsys DesignWare Mobile Storage IP
>>            block, this provides host support for SD and MMC interfaces, in both
>> -         PIO and external DMA modes.
>> -
>> -config MMC_DW_IDMAC
>> -       bool "Internal DMAC interface"
>> -       depends on MMC_DW
>> -       help
>> -         This selects support for the internal DMAC block within the Synopsys
>> -         Designware Mobile Storage IP block. This disables the external DMA
>> -         interface.
>> +         PIO, internal DMA mode and external DMA modes.
>>
>>   config MMC_DW_PLTFM
>>          tristate "Synopsys Designware MCI Support as platform device"
>> @@ -644,7 +636,6 @@ config MMC_DW_K3
>>          tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>>          depends on MMC_DW
>>          select MMC_DW_PLTFM
>> -       select MMC_DW_IDMAC
>>          help
>>            This selects support for Hisilicon K3 SoC specific extensions to the
>>            Synopsys DesignWare Memory Card Interface driver. Select this option
>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
>> index ec6dbcd..7e1d13b 100644
>> --- a/drivers/mmc/host/dw_mmc-pltfm.c
>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>>          host->pdata = pdev->dev.platform_data;
>>
>>          regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       /* Get registers' physical base address */
>> +       host->phy_regs = (void *)(regs->start);
>>          host->regs = devm_ioremap_resource(&pdev->dev, regs);
>>          if (IS_ERR(host->regs))
>>                  return PTR_ERR(host->regs);
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 40e9d8e..5d6cdff 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -56,7 +56,7 @@
>>   #define DW_MCI_FREQ_MAX        200000000       /* unit: HZ */
>>   #define DW_MCI_FREQ_MIN        400000          /* unit: HZ */
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> +
>>   #define IDMAC_INT_CLR          (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>>                                   SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>>                                   SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
>> @@ -99,7 +99,6 @@ struct idmac_desc {
>>
>>          __le32          des3;   /* buffer 2 physical address */
>>   };
>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>
>>   static bool dw_mci_reset(struct dw_mci *host);
>>   static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
>> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>>                  return DMA_FROM_DEVICE;
>>   }
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>>   static void dw_mci_dma_cleanup(struct dw_mci *host)
>>   {
>>          struct mmc_data *data = host->data;
>> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>>          mci_writel(host, BMOD, temp);
>>   }
>>
>> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
>> +static void dw_mci_dmac_complete_dma(void *arg)
>>   {
>> +       struct dw_mci *host = arg;
>>          struct mmc_data *data = host->data;
>>
>>          dev_vdbg(host->dev, "DMA complete\n");
>>
>> +       if (host->use_dma == TRANS_MODE_EDMAC)
>> +               if (data && (data->flags & MMC_DATA_READ))
>> +                       /* Invalidate cache after read */
>> +                       dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
>> +                                           data->sg,
>> +                                           data->sg_len,
>> +                                           DMA_FROM_DEVICE);
>> +
>>          host->dma_ops->cleanup(host);
>>
>>          /*
>> @@ -527,7 +534,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
>>          wmb();
>>   }
>>
>> -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>> +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>   {
>>          u32 temp;
>>
>> @@ -551,6 +558,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>
>>          /* Start it running */
>>          mci_writel(host, PLDMND, 1);
>> +
>> +       return 0;
>>   }
>>
>>   static int dw_mci_idmac_init(struct dw_mci *host)
>> @@ -629,10 +638,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
>>          .init = dw_mci_idmac_init,
>>          .start = dw_mci_idmac_start_dma,
>>          .stop = dw_mci_idmac_stop_dma,
>> -       .complete = dw_mci_idmac_complete_dma,
>> +       .complete = dw_mci_dmac_complete_dma,
>> +       .cleanup = dw_mci_dma_cleanup,
>> +};
>> +
>> +static void dw_mci_edmac_stop_dma(struct dw_mci *host)
>> +{
>> +       dmaengine_terminate_all(host->dms->ch);
>> +}
>> +
>> +static int dw_mci_edmac_start_dma(struct dw_mci *host,
>> +                                           unsigned int sg_len)
>> +{
>> +       struct dma_slave_config cfg;
>> +       struct dma_async_tx_descriptor *desc = NULL;
>> +       struct scatterlist *sgl = host->data->sg;
>> +       const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>> +       u32 sg_elems = host->data->sg_len;
>> +       u32 fifoth_val;
>> +       u32 fifo_offset = host->fifo_reg - host->regs;
>> +       int ret = 0;
>> +
>> +       /* Set external dma config: burst size, burst width */
>> +       cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
>> +       cfg.src_addr = cfg.dst_addr;
>> +       cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> +       cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> +
>> +       /* Match burst msize with external dma config */
>> +       fifoth_val = mci_readl(host, FIFOTH);
>> +       cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
>> +       cfg.src_maxburst = cfg.dst_maxburst;
>> +
>> +       if (host->data->flags & MMC_DATA_WRITE)
>> +               cfg.direction = DMA_MEM_TO_DEV;
>> +       else /* MMC_DATA_READ */
>> +               cfg.direction = DMA_DEV_TO_MEM;
>> +
>> +       ret = dmaengine_slave_config(host->dms->ch, &cfg);
>> +       if (ret) {
>> +               dev_err(host->dev, "Failed to config edmac.\n");
>> +               return -EBUSY;
>> +       }
>> +
>> +       desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
>> +                                      sg_len, cfg.direction,
>> +                                      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
>> +       if (!desc) {
>> +               dev_err(host->dev, "Can't prepare slave sg.\n");
>> +               return -EBUSY;
>> +       }
>> +
>> +       /* Set dw_mci_edmac_complete_dma as callback */
>> +       desc->callback = dw_mci_dmac_complete_dma;
>> +       desc->callback_param = (void *)host;
>> +       dmaengine_submit(desc);
>> +
>> +       /* Flush cache before write */
>> +       if (host->data->flags & MMC_DATA_WRITE)
>> +               dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
>> +                                      sg_elems, DMA_TO_DEVICE);
>> +
>> +       dma_async_issue_pending(host->dms->ch);
>> +
>> +       return 0;
>> +}
>> +
>> +static int dw_mci_edmac_init(struct dw_mci *host)
>> +{
>> +       /* Request external dma channel */
>> +       host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
>> +       if (!host->dms)
>> +               return -ENOMEM;
>> +
>> +       host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
>> +       if (!host->dms->ch) {
>> +               dev_err(host->dev,
>> +                       "Failed to get external DMA channel %d\n",
>> +                       host->dms->ch->chan_id);
>> +               kfree(host->dms);
>> +               host->dms = NULL;
>> +               return -ENXIO;
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static void dw_mci_edmac_exit(struct dw_mci *host)
>> +{
>> +       if (host->dms) {
>> +               if (host->dms->ch) {
>> +                       dma_release_channel(host->dms->ch);
>> +                       host->dms->ch = NULL;
>> +               }
>> +               kfree(host->dms);
>> +               host->dms = NULL;
>> +       }
>> +}
>> +
>> +static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
>> +       .init = dw_mci_edmac_init,
>> +       .exit = dw_mci_edmac_exit,
>> +       .start = dw_mci_edmac_start_dma,
>> +       .stop = dw_mci_edmac_stop_dma,
>> +       .complete = dw_mci_dmac_complete_dma,
>>          .cleanup = dw_mci_dma_cleanup,
>>   };
>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>
>>   static int dw_mci_pre_dma_transfer(struct dw_mci *host,
>>                                     struct mmc_data *data,
>> @@ -712,7 +823,6 @@ static void dw_mci_post_req(struct mmc_host *mmc,
>>
>>   static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>   {
>> -#ifdef CONFIG_MMC_DW_IDMAC
>>          unsigned int blksz = data->blksz;
>>          const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>>          u32 fifo_width = 1 << host->data_shift;
>> @@ -720,6 +830,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>          u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
>>          int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
>>
>> +       /* pio should ship this scenario */
>> +       if (!host->use_dma)
>> +               return;
>> +
>>          tx_wmark = (host->fifo_depth) / 2;
>>          tx_wmark_invers = host->fifo_depth - tx_wmark;
>>
>> @@ -748,7 +862,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>   done:
>>          fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
>>          mci_writel(host, FIFOTH, fifoth_val);
>> -#endif
>>   }
>>
>>   static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
>> @@ -835,7 +948,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>>          mci_writel(host, INTMASK, temp);
>>          spin_unlock_irqrestore(&host->irq_lock, irqflags);
>>
>> -       host->dma_ops->start(host, sg_len);
>> +       if (host->dma_ops->start(host, sg_len)) {
>> +               /* We can't do DMA */
>> +               dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
>> +               return -ENODEV;
>> +       }
>>
>>          return 0;
>>   }
>> @@ -2256,26 +2373,30 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>>
>>          }
>>
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -       /* Handle DMA interrupts */
>> -       if (host->dma_64bit_address == 1) {
>> -               pending = mci_readl(host, IDSTS64);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> -               }
>> -       } else {
>> -               pending = mci_readl(host, IDSTS);
>> -               if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
>> -                                                       SDMMC_IDMAC_INT_RI);
>> -                       mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> -                       host->dma_ops->complete(host);
>> +       if (host->use_dma == TRANS_MODE_IDMAC) {
>> +               /* Handle DMA interrupts */
>> +               if (host->dma_64bit_address == 1) {
>> +                       pending = mci_readl(host, IDSTS64);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS64,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>> +               } else {
>> +                       pending = mci_readl(host, IDSTS);
>> +                       if (pending & (SDMMC_IDMAC_INT_TI |
>> +                                      SDMMC_IDMAC_INT_RI)) {
>> +                               mci_writel(host, IDSTS,
>> +                                          SDMMC_IDMAC_INT_TI |
>> +                                          SDMMC_IDMAC_INT_RI);
>> +                               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>> +                               host->dma_ops->complete((void *)host);
>> +                       }
>>                  }
>>          }
>> -#endif
>>
>>          return IRQ_HANDLED;
>>   }
>> @@ -2391,19 +2512,28 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>>                  mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
>>          } else {
>>                  /* Useful defaults if platform data is unset. */
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -               mmc->max_segs = host->ring_size;
>> -               mmc->max_blk_size = 65536;
>> -               mmc->max_seg_size = 0x1000;
>> -               mmc->max_req_size = mmc->max_seg_size * host->ring_size;
>> -               mmc->max_blk_count = mmc->max_req_size / 512;
>> -#else
>> -               mmc->max_segs = 64;
>> -               mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
>> -               mmc->max_blk_count = 512;
>> -               mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
>> -               mmc->max_seg_size = mmc->max_req_size;
>> -#endif /* CONFIG_MMC_DW_IDMAC */
>> +               if (host->use_dma == TRANS_MODE_IDMAC) {
>> +                       mmc->max_segs = host->ring_size;
>> +                       mmc->max_blk_size = 65536;
>> +                       mmc->max_seg_size = 0x1000;
>> +                       mmc->max_req_size = mmc->max_seg_size * host->ring_size;
>> +                       mmc->max_blk_count = mmc->max_req_size / 512;
>> +               } else if (host->use_dma == TRANS_MODE_EDMAC) {
>> +                       mmc->max_segs = 64;
>> +                       mmc->max_blk_size = 65536;
>> +                       mmc->max_blk_count = 65535;
>> +                       mmc->max_req_size =
>> +                                       mmc->max_blk_size * mmc->max_blk_count;
>> +                       mmc->max_seg_size = mmc->max_req_size;
>> +               } else {
>> +                       /* TRANS_MODE_PIO */
>> +                       mmc->max_segs = 64;
>> +                       mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
>> +                       mmc->max_blk_count = 512;
>> +                       mmc->max_req_size =
>> +                                       mmc->max_blk_size * mmc->max_blk_count;
>> +                       mmc->max_seg_size = mmc->max_req_size;
>> +               }
>>          }
>>
>>          if (dw_mci_get_cd(mmc))
>> @@ -2437,6 +2567,21 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>>   static void dw_mci_init_dma(struct dw_mci *host)
>>   {
>>          int addr_config;
>> +       int trans_mode;
>> +       struct device *dev = host->dev;
>> +       struct device_node *np = dev->of_node;
>> +
>> +       /* Check tansfer mode */
>> +       trans_mode = (mci_readl(host, HCON) >> 16) & 0x3;
>> +       if (trans_mode == 0) {
>> +               trans_mode = TRANS_MODE_IDMAC;
>> +       } else if (trans_mode == 1 || trans_mode == 2) {
>> +               trans_mode = TRANS_MODE_EDMAC;
>> +       } else {
>> +               trans_mode = TRANS_MODE_PIO;
>> +               goto no_dma;
>> +       }
>> +
>>          /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>>          addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>>
>> @@ -2462,10 +2607,19 @@ static void dw_mci_init_dma(struct dw_mci *host)
>>          }
>>
>>          /* Determine which DMA interface to use */
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> -       host->dma_ops = &dw_mci_idmac_ops;
>> -       dev_info(host->dev, "Using internal DMA controller.\n");
>> -#endif
>> +       if (trans_mode == TRANS_MODE_IDMAC) {
>> +               host->dma_ops = &dw_mci_idmac_ops;
>> +               dev_info(host->dev, "Using internal DMA controller.\n");
>> +       } else {
>> +               /* TRANS_MODE_EDMAC: check dma bindings again */
>> +               if ((of_property_count_strings(np, "dma-names") < 0) ||
>> +                   (!of_find_property(np, "dmas", NULL))) {
>> +                       trans_mode = TRANS_MODE_PIO;
>> +                       goto no_dma;
>> +               }
>> +               host->dma_ops = &dw_mci_edmac_ops;
>> +               dev_info(host->dev, "Using external DMA controller.\n");
>> +       }
>>
>>          if (!host->dma_ops)
>>                  goto no_dma;
>> @@ -2482,12 +2636,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
>>                  goto no_dma;
>>          }
>>
>> -       host->use_dma = 1;
>> +       host->use_dma = trans_mode;
>>          return;
>>
>>   no_dma:
>>          dev_info(host->dev, "Using PIO mode.\n");
>> -       host->use_dma = 0;
>> +       host->use_dma = trans_mode;
>>          return;
>>   }
>>
>> @@ -2570,10 +2724,9 @@ static bool dw_mci_reset(struct dw_mci *host)
>>                  }
>>          }
>>
>> -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
>> -       /* It is also recommended that we reset and reprogram idmac */
>> -       dw_mci_idmac_reset(host);
>> -#endif
>> +       if (host->use_dma == TRANS_MODE_IDMAC)
>> +               /* It is also recommended that we reset and reprogram idmac */
>> +               dw_mci_idmac_reset(host);
>>
>>          ret = true;
>>
>> @@ -2958,6 +3111,9 @@ EXPORT_SYMBOL(dw_mci_remove);
>>    */
>>   int dw_mci_suspend(struct dw_mci *host)
>>   {
>> +       if (host->use_dma && host->dma_ops->exit)
>> +               host->dma_ops->exit(host);
>> +
>>          return 0;
>>   }
>>   EXPORT_SYMBOL(dw_mci_suspend);
>> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
>> index 5be9767..9ed6257 100644
>> --- a/include/linux/mmc/dw_mmc.h
>> +++ b/include/linux/mmc/dw_mmc.h
>> @@ -16,6 +16,7 @@
>>
>>   #include <linux/scatterlist.h>
>>   #include <linux/mmc/core.h>
>> +#include <linux/dmaengine.h>
>>
>>   #define MAX_MCI_SLOTS  2
>>
>> @@ -40,6 +41,17 @@ enum {
>>
>>   struct mmc_data;
>>
>> +enum {
>> +       TRANS_MODE_PIO = 0,
>> +       TRANS_MODE_IDMAC,
>> +       TRANS_MODE_EDMAC
>> +};
>> +
>> +struct dw_mci_dma_slave {
>> +       struct dma_chan *ch;
>> +       enum dma_transfer_direction direction;
>> +};
>> +
>>   /**
>>    * struct dw_mci - MMC controller state shared between all slots
>>    * @lock: Spinlock protecting the queue and associated data.
>> @@ -153,11 +165,16 @@ struct dw_mci {
>>          dma_addr_t              sg_dma;
>>          void                    *sg_cpu;
>>          const struct dw_mci_dma_ops     *dma_ops;
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> +       /* For idmac */
>>          unsigned int            ring_size;
>> -#else
>> +
>> +       /* For edmac */
>> +       struct dw_mci_dma_slave *dms;
>> +       /* Registers's physical base address */
>> +       void                    *phy_regs;
>> +
>>          struct dw_mci_dma_data  *dma_data;
>> -#endif
>> +
>>          u32                     cmd_status;
>>          u32                     data_status;
>>          u32                     stop_cmdr;
>> @@ -210,8 +227,8 @@ struct dw_mci {
>>   struct dw_mci_dma_ops {
>>          /* DMA Ops */
>>          int (*init)(struct dw_mci *host);
>> -       void (*start)(struct dw_mci *host, unsigned int sg_len);
>> -       void (*complete)(struct dw_mci *host);
>> +       int (*start)(struct dw_mci *host, unsigned int sg_len);
>> +       void (*complete)(void *host);
>>          void (*stop)(struct dw_mci *host);
>>          void (*cleanup)(struct dw_mci *host);
>>          void (*exit)(struct dw_mci *host);
>> --
>> 2.3.7
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
>


-- 
Shawn Lin

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC PATCH v4 2/9] Documentation: synopsys-dw-mshc: add bindings for idmac and edmac

[Shawn Lin]

synopsys-dw-mshc supports three types of transfer mode. We add
bindings and description for how to use them at runtime.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 346c609..8636f5a 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -75,6 +75,12 @@ Optional properties:
 * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
   specified we'll defer probe until we can find this regulator.
 
+* dmas: List of DMA specifiers with the controller specific format as described
+  in the generic DMA client binding. Refer to dma.txt for details.
+
+* dma-names: request names for generic DMA client binding. Must be "rx-tx".
+  Refer to dma.txt for details.
+
 Aliases:
 
 - All the MSHC controller nodes should be represented in the aliases node using
@@ -95,6 +101,23 @@ board specific portions as listed below.
 		#size-cells = <0>;
 	};
 
+[board specific internal DMA resources]
+
+	dwmmc0@12200000 {
+		clock-frequency = <400000000>;
+		clock-freq-min-max = <400000 200000000>;
+		num-slots = <1>;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		vmmc-supply = <&buck8>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+	};
+
+[board specific generic DMA request binding]
+
 	dwmmc0@12200000 {
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
@@ -106,4 +129,6 @@ board specific portions as listed below.
 		bus-width = <8>;
 		cap-mmc-highspeed;
 		cap-sd-highspeed;
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
 	};
-- 
2.3.7

[RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/mips/configs/pistachio_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig
index 1646cce..013c62c 100644
--- a/arch/mips/configs/pistachio_defconfig
+++ b/arch/mips/configs/pistachio_defconfig
@@ -257,7 +257,6 @@ CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_TEST=m
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
-- 
2.3.7

RE: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Govindraj Raja]

> -----Original Message-----
> From: Shawn Lin [mailto:shawn.lin@rock-chips.com]
> Sent: 06 August 2015 07:45 AM
> To: jh80.chung@samsung.com; ulf.hansson@linaro.org
> Cc: heiko@sntech.de; dianders@chromium.org; Vineet.Gupta1@synopsys.com;
> Wei Xu; Joachim Eastwood; Alexey Brodkin; Kukjin Kim; Krzysztof Kozlowski;
> Russell King; Jun Nie; Ralf Baechle; Govindraj Raja; linux-arm-
> kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org; linux-
> mips@linux-mips.org; linux-mmc@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-rockchip@lists.infradead.org;
> devicetree@vger.kernel.org; Shawn Lin
> Subject: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove
> CONFIG_MMC_DW_IDMAC
> 
> DesignWare MMC Controller's transfer mode should be decided at runtime
> instead of compile-time. So we remove this config option and read dw_mmc's
> register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/mips/configs/pistachio_defconfig | 1 -
>  1 file changed, 1 deletion(-)

Acked-by: Govindraj Raja <govindraj.raja@imgtec.com>

--
Thanks,
Govindraj.R

[RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Govindraj Raja]

> -----Original Message-----
> From: Shawn Lin [mailto:shawn.lin at rock-chips.com]
> Sent: 06 August 2015 07:45 AM
> To: jh80.chung at samsung.com; ulf.hansson at linaro.org
> Cc: heiko at sntech.de; dianders at chromium.org; Vineet.Gupta1 at synopsys.com;
> Wei Xu; Joachim Eastwood; Alexey Brodkin; Kukjin Kim; Krzysztof Kozlowski;
> Russell King; Jun Nie; Ralf Baechle; Govindraj Raja; linux-arm-
> kernel at lists.infradead.org; linux-samsung-soc at vger.kernel.org; linux-
> mips at linux-mips.org; linux-mmc at vger.kernel.org; linux-
> kernel at vger.kernel.org; linux-rockchip at lists.infradead.org;
> devicetree at vger.kernel.org; Shawn Lin
> Subject: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove
> CONFIG_MMC_DW_IDMAC
> 
> DesignWare MMC Controller's transfer mode should be decided at runtime
> instead of compile-time. So we remove this config option and read dw_mmc's
> register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/mips/configs/pistachio_defconfig | 1 -
>  1 file changed, 1 deletion(-)

Acked-by: Govindraj Raja <govindraj.raja@imgtec.com>

--
Thanks,
Govindraj.R

RE: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Govindraj Raja]

> -----Original Message-----
> From: Shawn Lin [mailto:shawn.lin@rock-chips.com]
> Sent: 06 August 2015 07:45 AM
> To: jh80.chung@samsung.com; ulf.hansson@linaro.org
> Cc: heiko@sntech.de; dianders@chromium.org; Vineet.Gupta1@synopsys.com;
> Wei Xu; Joachim Eastwood; Alexey Brodkin; Kukjin Kim; Krzysztof Kozlowski;
> Russell King; Jun Nie; Ralf Baechle; Govindraj Raja; linux-arm-
> kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org; linux-
> mips@linux-mips.org; linux-mmc@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-rockchip@lists.infradead.org;
> devicetree@vger.kernel.org; Shawn Lin
> Subject: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove
> CONFIG_MMC_DW_IDMAC
> 
> DesignWare MMC Controller's transfer mode should be decided at runtime
> instead of compile-time. So we remove this config option and read dw_mmc's
> register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/mips/configs/pistachio_defconfig | 1 -
>  1 file changed, 1 deletion(-)

Acked-by: Govindraj Raja <govindraj.raja@imgtec.com>

--
Thanks,
Govindraj.R

Re: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Ralf Baechle]

On Thu, Aug 06, 2015 at 02:45:15PM +0800, Shawn Lin wrote:

>  arch/mips/configs/pistachio_defconfig | 1 -

Acked-by: Ralf Baechle <ralf@linux-mips.org>

  Ralf

[RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Ralf Baechle]

On Thu, Aug 06, 2015 at 02:45:15PM +0800, Shawn Lin wrote:

>  arch/mips/configs/pistachio_defconfig | 1 -

Acked-by: Ralf Baechle <ralf@linux-mips.org>

  Ralf

Re: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Ralf Baechle]

On Thu, Aug 06, 2015 at 02:45:15PM +0800, Shawn Lin wrote:

> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/mips/configs/pistachio_defconfig | 1 -

Acked-by: Ralf Baechle <ralf@linux-mips.org>

Please feel free to merge this patch with the remainder
of the series.

  Ralf

[RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Ralf Baechle]

On Thu, Aug 06, 2015 at 02:45:15PM +0800, Shawn Lin wrote:

> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/mips/configs/pistachio_defconfig | 1 -

Acked-by: Ralf Baechle <ralf@linux-mips.org>

Please feel free to merge this patch with the remainder
of the series.

  Ralf

Re: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

在 2015/8/13 6:05, Ralf Baechle 写道:
> On Thu, Aug 06, 2015 at 02:45:15PM +0800, Shawn Lin wrote:
>
>> DesignWare MMC Controller's transfer mode should be decided
>> at runtime instead of compile-time. So we remove this config
>> option and read dw_mmc's register to select DMA master.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>> ---
>>
>> Changes in v4: None
>> Changes in v3: None
>> Changes in v2: None
>>
>>   arch/mips/configs/pistachio_defconfig | 1 -
>
> Acked-by: Ralf Baechle <ralf@linux-mips.org>
>
> Please feel free to merge this patch with the remainder
> of the series.
>

Thanks, Ralf. :)

v5 is coming which will be rebased on 
"https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for 
the next merge window
that make Jeahoon do it easier. Also define new macro for reading
HCON register suggested by Joachim.


>    Ralf
>
>
>


-- 
Shawn Lin

[RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

? 2015/8/13 6:05, Ralf Baechle ??:
> On Thu, Aug 06, 2015 at 02:45:15PM +0800, Shawn Lin wrote:
>
>> DesignWare MMC Controller's transfer mode should be decided
>> at runtime instead of compile-time. So we remove this config
>> option and read dw_mmc's register to select DMA master.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>> ---
>>
>> Changes in v4: None
>> Changes in v3: None
>> Changes in v2: None
>>
>>   arch/mips/configs/pistachio_defconfig | 1 -
>
> Acked-by: Ralf Baechle <ralf@linux-mips.org>
>
> Please feel free to merge this patch with the remainder
> of the series.
>

Thanks, Ralf. :)

v5 is coming which will be rebased on 
"https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for 
the next merge window
that make Jeahoon do it easier. Also define new macro for reading
HCON register suggested by Joachim.


>    Ralf
>
>
>


-- 
Shawn Lin

Re: [RFC PATCH v4 3/9] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

在 2015/8/13 6:05, Ralf Baechle 写道:
> On Thu, Aug 06, 2015 at 02:45:15PM +0800, Shawn Lin wrote:
>
>> DesignWare MMC Controller's transfer mode should be decided
>> at runtime instead of compile-time. So we remove this config
>> option and read dw_mmc's register to select DMA master.
>>
>> Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>> ---
>>
>> Changes in v4: None
>> Changes in v3: None
>> Changes in v2: None
>>
>>   arch/mips/configs/pistachio_defconfig | 1 -
>
> Acked-by: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
>
> Please feel free to merge this patch with the remainder
> of the series.
>

Thanks, Ralf. :)

v5 is coming which will be rebased on 
"https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for 
the next merge window
that make Jeahoon do it easier. Also define new macro for reading
HCON register suggested by Joachim.


>    Ralf
>
>
>


-- 
Shawn Lin

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC PATCH v4 4/9] arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arc/configs/axs101_defconfig     | 1 -
 arch/arc/configs/axs103_defconfig     | 1 -
 arch/arc/configs/axs103_smp_defconfig | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index 562dac6..c92c0ef 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -89,7 +89,6 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index 83a6d8d..cfac24e 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -95,7 +95,6 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index f1e1c84..9922a11 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -96,7 +96,6 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
-- 
2.3.7

Re: [RFC PATCH v4 4/9] arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC

[Vineet Gupta]

On Thursday 06 August 2015 12:19 PM, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Vineet Gupta <vgupta@synopsys.com>

Thx,
-Vineet

[RFC PATCH v4 4/9] arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC

[Vineet Gupta]

On Thursday 06 August 2015 12:19 PM, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Vineet Gupta <vgupta@synopsys.com>

Thx,
-Vineet

Re: [RFC PATCH v4 4/9] arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC

[Vineet Gupta]

On Thursday 06 August 2015 12:19 PM, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Vineet Gupta <vgupta@synopsys.com>

Thx,
-Vineet

[RFC PATCH v4 5/9] arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/configs/exynos_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 9504e77..7e4af6e 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -161,7 +161,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S3C=y
 CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX77686=y
-- 
2.3.7

Re: [RFC PATCH v4 5/9] arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC

[Krzysztof Kozlowski]

On 06.08.2015 15:45, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/configs/exynos_defconfig | 1 -
>  1 file changed, 1 deletion(-)

Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

[RFC PATCH v4 5/9] arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC

[Krzysztof Kozlowski]

On 06.08.2015 15:45, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/configs/exynos_defconfig | 1 -
>  1 file changed, 1 deletion(-)

Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

[RFC PATCH v4 6/9] arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/configs/hisi_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index 5997dbc..b2e340b 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -69,7 +69,6 @@ CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_RTC_CLASS=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_PLTFM=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
-- 
2.3.7

Re: [RFC PATCH v4 6/9] arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC

[Wei Xu]

On 8/6/2015 7:45 AM, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Wei Xu <xuwei5@hisilicon.com>

> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/configs/hisi_defconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
> index 5997dbc..b2e340b 100644
> --- a/arch/arm/configs/hisi_defconfig
> +++ b/arch/arm/configs/hisi_defconfig
> @@ -69,7 +69,6 @@ CONFIG_NOP_USB_XCEIV=y
>  CONFIG_MMC=y
>  CONFIG_RTC_CLASS=y
>  CONFIG_MMC_DW=y
> -CONFIG_MMC_DW_IDMAC=y
>  CONFIG_MMC_DW_PLTFM=y
>  CONFIG_RTC_DRV_PL031=y
>  CONFIG_DMADEVICES=y
> 

Thanks!

Best Regards,
Wei

[RFC PATCH v4 6/9] arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC

[Wei Xu]

On 8/6/2015 7:45 AM, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Wei Xu <xuwei5@hisilicon.com>

> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/configs/hisi_defconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
> index 5997dbc..b2e340b 100644
> --- a/arch/arm/configs/hisi_defconfig
> +++ b/arch/arm/configs/hisi_defconfig
> @@ -69,7 +69,6 @@ CONFIG_NOP_USB_XCEIV=y
>  CONFIG_MMC=y
>  CONFIG_RTC_CLASS=y
>  CONFIG_MMC_DW=y
> -CONFIG_MMC_DW_IDMAC=y
>  CONFIG_MMC_DW_PLTFM=y
>  CONFIG_RTC_DRV_PL031=y
>  CONFIG_DMADEVICES=y
> 

Thanks!

Best Regards,
Wei

Re: [RFC PATCH v4 6/9] arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC

[Wei Xu]

On 8/6/2015 7:45 AM, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

Acked-by: Wei Xu <xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>

> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/configs/hisi_defconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
> index 5997dbc..b2e340b 100644
> --- a/arch/arm/configs/hisi_defconfig
> +++ b/arch/arm/configs/hisi_defconfig
> @@ -69,7 +69,6 @@ CONFIG_NOP_USB_XCEIV=y
>  CONFIG_MMC=y
>  CONFIG_RTC_CLASS=y
>  CONFIG_MMC_DW=y
> -CONFIG_MMC_DW_IDMAC=y
>  CONFIG_MMC_DW_PLTFM=y
>  CONFIG_RTC_DRV_PL031=y
>  CONFIG_DMADEVICES=y
> 

Thanks!

Best Regards,
Wei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC PATCH v4 6/9] arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC

[Wei Xu]

On 8/6/2015 7:45 AM, Shawn Lin wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Wei Xu <xuwei5@hisilicon.com>

> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/configs/hisi_defconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
> index 5997dbc..b2e340b 100644
> --- a/arch/arm/configs/hisi_defconfig
> +++ b/arch/arm/configs/hisi_defconfig
> @@ -69,7 +69,6 @@ CONFIG_NOP_USB_XCEIV=y
>  CONFIG_MMC=y
>  CONFIG_RTC_CLASS=y
>  CONFIG_MMC_DW=y
> -CONFIG_MMC_DW_IDMAC=y
>  CONFIG_MMC_DW_PLTFM=y
>  CONFIG_RTC_DRV_PL031=y
>  CONFIG_DMADEVICES=y
> 

Thanks!

Best Regards,
Wei

[RFC PATCH v4 7/9] arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/configs/lpc18xx_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
index 1c47f86..b7e8cda 100644
--- a/arch/arm/configs/lpc18xx_defconfig
+++ b/arch/arm/configs/lpc18xx_defconfig
@@ -119,7 +119,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_MMC=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_PCA9532=y
-- 
2.3.7

Re: [RFC PATCH v4 7/9] arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC

[Joachim Eastwood]

On 6 August 2015 at 08:46, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Joachim Eastwood <manabian@gmail.com>

>  arch/arm/configs/lpc18xx_defconfig | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
> index 1c47f86..b7e8cda 100644
> --- a/arch/arm/configs/lpc18xx_defconfig
> +++ b/arch/arm/configs/lpc18xx_defconfig
> @@ -119,7 +119,6 @@ CONFIG_USB_EHCI_HCD=y
>  CONFIG_USB_EHCI_ROOT_HUB_TT=y
>  CONFIG_MMC=y
>  CONFIG_MMC_DW=y
> -CONFIG_MMC_DW_IDMAC=y
>  CONFIG_NEW_LEDS=y
>  CONFIG_LEDS_CLASS=y
>  CONFIG_LEDS_PCA9532=y
> --
> 2.3.7
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

[RFC PATCH v4 7/9] arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC

[Joachim Eastwood]

On 6 August 2015 at 08:46, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> DesignWare MMC Controller's transfer mode should be decided
> at runtime instead of compile-time. So we remove this config
> option and read dw_mmc's register to select DMA master.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Joachim Eastwood <manabian@gmail.com>

>  arch/arm/configs/lpc18xx_defconfig | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
> index 1c47f86..b7e8cda 100644
> --- a/arch/arm/configs/lpc18xx_defconfig
> +++ b/arch/arm/configs/lpc18xx_defconfig
> @@ -119,7 +119,6 @@ CONFIG_USB_EHCI_HCD=y
>  CONFIG_USB_EHCI_ROOT_HUB_TT=y
>  CONFIG_MMC=y
>  CONFIG_MMC_DW=y
> -CONFIG_MMC_DW_IDMAC=y
>  CONFIG_NEW_LEDS=y
>  CONFIG_LEDS_CLASS=y
>  CONFIG_LEDS_PCA9532=y
> --
> 2.3.7
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

[RFC PATCH v4 8/9] arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/configs/multi_v7_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 5fd8df6..a3734b5 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -520,7 +520,6 @@ CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_PLTFM=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_MMC_DW_ROCKCHIP=y
-- 
2.3.7

[RFC PATCH v4 9/9] arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/configs/zx_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig
index b200bb0..ab683fb 100644
--- a/arch/arm/configs/zx_defconfig
+++ b/arch/arm/configs/zx_defconfig
@@ -83,7 +83,6 @@ CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
-- 
2.3.7

[RFC PATCH v4 9/9] arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC

[Shawn Lin]

DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.

Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/configs/zx_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig
index b200bb0..ab683fb 100644
--- a/arch/arm/configs/zx_defconfig
+++ b/arch/arm/configs/zx_defconfig
@@ -83,7 +83,6 @@ CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
-- 
2.3.7


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC PATCH v4 0/9]

[Jaehoon Chung]

Hi, Shawn.

I remembered that Krzysztof has mentioned "Fix the title of cover letter."
Your cover letter's title is nothing.. "[RFC PATCH v4 0/9] " ??
[RFC PATCH v4 0/9] your title...

Best Regards,
Jaehoon Chung

On 08/06/2015 03:44 PM, Shawn Lin wrote:
> Add external dma support for Synopsys MSHC
> 
> Synopsys DesignWare mobile storage host controller supports three
> types of transfer mode: pio, internal dma and external dma. However,
> dw_mmc can only supports pio and internal dma now. Thus some platforms
> using dw-mshc integrated with generic dma can't work in dma mode. So we
> submit this patch to achieve it.
> 
> And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
> (commit:f95f3850) for the first version of dw_mmc and never be touched since
> then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
> we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
> time. Nowadays, device-tree helps us to support a variety of boards with one
> kernel. That's why we need to remove it and decide the transfer mode by reading
> dw_mmc's HCON reg at runtime.
> 
> This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
> to make the running.
> 
> Patch does the following things:
> - remove CONFIG_MMC_DW_IDMAC config option
> - add bindings for edmac used by synopsys-dw-mshc
>   at runtime
> - add edmac support for synopsys-dw-mshc
> 
> Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
> 
> 
> Changes in v4:
> - remove "host->trans_mode" and use "host->use_dma" to indicate
>   transfer mode.
> - remove all bt-bindings' changes since we don't need new properities.
> - check transfer mode at runtime by reading HCON reg
> - spilt defconfig changes for each sub-architecture
> - fix the title of cover letter
> - reuse some code for reducing code size
> 
> Changes in v3:
> - choose transfer mode at runtime
> - remove all CONFIG_MMC_DW_IDMAC config option
> - add supports-idmac property for some platforms
> 
> Changes in v2:
> - Fix typo of dev_info msg
> - remove unused dmach from declaration of dw_mci_dma_slave
> 
> Shawn Lin (9):
>   mmc: dw_mmc: Add external dma interface support
>   Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
>   mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
> 
>  .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |  25 ++
>  arch/arc/configs/axs101_defconfig                  |   1 -
>  arch/arc/configs/axs103_defconfig                  |   1 -
>  arch/arc/configs/axs103_smp_defconfig              |   1 -
>  arch/arm/configs/exynos_defconfig                  |   1 -
>  arch/arm/configs/hisi_defconfig                    |   1 -
>  arch/arm/configs/lpc18xx_defconfig                 |   1 -
>  arch/arm/configs/multi_v7_defconfig                |   1 -
>  arch/arm/configs/zx_defconfig                      |   1 -
>  arch/mips/configs/pistachio_defconfig              |   1 -
>  drivers/mmc/host/Kconfig                           |  11 +-
>  drivers/mmc/host/dw_mmc-pltfm.c                    |   2 +
>  drivers/mmc/host/dw_mmc.c                          | 258 +++++++++++++++++----
>  include/linux/mmc/dw_mmc.h                         |  27 ++-
>  14 files changed, 257 insertions(+), 75 deletions(-)
> 

[RFC PATCH v4 0/9]

[Jaehoon Chung]

Hi, Shawn.

I remembered that Krzysztof has mentioned "Fix the title of cover letter."
Your cover letter's title is nothing.. "[RFC PATCH v4 0/9] " ??
[RFC PATCH v4 0/9] your title...

Best Regards,
Jaehoon Chung

On 08/06/2015 03:44 PM, Shawn Lin wrote:
> Add external dma support for Synopsys MSHC
> 
> Synopsys DesignWare mobile storage host controller supports three
> types of transfer mode: pio, internal dma and external dma. However,
> dw_mmc can only supports pio and internal dma now. Thus some platforms
> using dw-mshc integrated with generic dma can't work in dma mode. So we
> submit this patch to achieve it.
> 
> And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
> (commit:f95f3850) for the first version of dw_mmc and never be touched since
> then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
> we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
> time. Nowadays, device-tree helps us to support a variety of boards with one
> kernel. That's why we need to remove it and decide the transfer mode by reading
> dw_mmc's HCON reg at runtime.
> 
> This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
> to make the running.
> 
> Patch does the following things:
> - remove CONFIG_MMC_DW_IDMAC config option
> - add bindings for edmac used by synopsys-dw-mshc
>   at runtime
> - add edmac support for synopsys-dw-mshc
> 
> Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
> 
> 
> Changes in v4:
> - remove "host->trans_mode" and use "host->use_dma" to indicate
>   transfer mode.
> - remove all bt-bindings' changes since we don't need new properities.
> - check transfer mode at runtime by reading HCON reg
> - spilt defconfig changes for each sub-architecture
> - fix the title of cover letter
> - reuse some code for reducing code size
> 
> Changes in v3:
> - choose transfer mode at runtime
> - remove all CONFIG_MMC_DW_IDMAC config option
> - add supports-idmac property for some platforms
> 
> Changes in v2:
> - Fix typo of dev_info msg
> - remove unused dmach from declaration of dw_mci_dma_slave
> 
> Shawn Lin (9):
>   mmc: dw_mmc: Add external dma interface support
>   Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
>   mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
>   arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
> 
>  .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |  25 ++
>  arch/arc/configs/axs101_defconfig                  |   1 -
>  arch/arc/configs/axs103_defconfig                  |   1 -
>  arch/arc/configs/axs103_smp_defconfig              |   1 -
>  arch/arm/configs/exynos_defconfig                  |   1 -
>  arch/arm/configs/hisi_defconfig                    |   1 -
>  arch/arm/configs/lpc18xx_defconfig                 |   1 -
>  arch/arm/configs/multi_v7_defconfig                |   1 -
>  arch/arm/configs/zx_defconfig                      |   1 -
>  arch/mips/configs/pistachio_defconfig              |   1 -
>  drivers/mmc/host/Kconfig                           |  11 +-
>  drivers/mmc/host/dw_mmc-pltfm.c                    |   2 +
>  drivers/mmc/host/dw_mmc.c                          | 258 +++++++++++++++++----
>  include/linux/mmc/dw_mmc.h                         |  27 ++-
>  14 files changed, 257 insertions(+), 75 deletions(-)
> 

Re: [RFC PATCH v4 0/9]

[Shawn Lin]

在 2015/8/6 15:08, Jaehoon Chung 写道:
> Hi, Shawn.
>
> I remembered that Krzysztof has mentioned "Fix the title of cover letter."
> Your cover letter's title is nothing.. "[RFC PATCH v4 0/9] " ??
> [RFC PATCH v4 0/9] your title...
  Sorry, I forgot it, and will fix in next version...

> Best Regards,
> Jaehoon Chung
>
> On 08/06/2015 03:44 PM, Shawn Lin wrote:
>> Add external dma support for Synopsys MSHC
>>
>> Synopsys DesignWare mobile storage host controller supports three
>> types of transfer mode: pio, internal dma and external dma. However,
>> dw_mmc can only supports pio and internal dma now. Thus some platforms
>> using dw-mshc integrated with generic dma can't work in dma mode. So we
>> submit this patch to achieve it.
>>
>> And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
>> (commit:f95f3850) for the first version of dw_mmc and never be touched since
>> then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
>> we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
>> time. Nowadays, device-tree helps us to support a variety of boards with one
>> kernel. That's why we need to remove it and decide the transfer mode by reading
>> dw_mmc's HCON reg at runtime.
>>
>> This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
>> to make the running.
>>
>> Patch does the following things:
>> - remove CONFIG_MMC_DW_IDMAC config option
>> - add bindings for edmac used by synopsys-dw-mshc
>>    at runtime
>> - add edmac support for synopsys-dw-mshc
>>
>> Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
>>
>>
>> Changes in v4:
>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>    transfer mode.
>> - remove all bt-bindings' changes since we don't need new properities.
>> - check transfer mode at runtime by reading HCON reg
>> - spilt defconfig changes for each sub-architecture
>> - fix the title of cover letter
>> - reuse some code for reducing code size
>>
>> Changes in v3:
>> - choose transfer mode at runtime
>> - remove all CONFIG_MMC_DW_IDMAC config option
>> - add supports-idmac property for some platforms
>>
>> Changes in v2:
>> - Fix typo of dev_info msg
>> - remove unused dmach from declaration of dw_mci_dma_slave
>>
>> Shawn Lin (9):
>>    mmc: dw_mmc: Add external dma interface support
>>    Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
>>    mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
>>    arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
>>    arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
>>    arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
>>    arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>    arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
>>    arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>
>>   .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |  25 ++
>>   arch/arc/configs/axs101_defconfig                  |   1 -
>>   arch/arc/configs/axs103_defconfig                  |   1 -
>>   arch/arc/configs/axs103_smp_defconfig              |   1 -
>>   arch/arm/configs/exynos_defconfig                  |   1 -
>>   arch/arm/configs/hisi_defconfig                    |   1 -
>>   arch/arm/configs/lpc18xx_defconfig                 |   1 -
>>   arch/arm/configs/multi_v7_defconfig                |   1 -
>>   arch/arm/configs/zx_defconfig                      |   1 -
>>   arch/mips/configs/pistachio_defconfig              |   1 -
>>   drivers/mmc/host/Kconfig                           |  11 +-
>>   drivers/mmc/host/dw_mmc-pltfm.c                    |   2 +
>>   drivers/mmc/host/dw_mmc.c                          | 258 +++++++++++++++++----
>>   include/linux/mmc/dw_mmc.h                         |  27 ++-
>>   14 files changed, 257 insertions(+), 75 deletions(-)
>>
>
>
>


-- 
Shawn Lin

Re: [RFC PATCH v4 0/9]

[Jaehoon Chung]

On 08/06/2015 04:31 PM, Shawn Lin wrote:
> 在 2015/8/6 15:08, Jaehoon Chung 写道:
>> Hi, Shawn.
>>
>> I remembered that Krzysztof has mentioned "Fix the title of cover letter."
>> Your cover letter's title is nothing.. "[RFC PATCH v4 0/9] " ??
>> [RFC PATCH v4 0/9] your title...
>  Sorry, I forgot it, and will fix in next version...

No problem :) 
At next time,  add the title at your cover-letter, plz.

Best Regards,
Jaehoon Chung

> 
>> Best Regards,
>> Jaehoon Chung
>>
>> On 08/06/2015 03:44 PM, Shawn Lin wrote:
>>> Add external dma support for Synopsys MSHC
>>>
>>> Synopsys DesignWare mobile storage host controller supports three
>>> types of transfer mode: pio, internal dma and external dma. However,
>>> dw_mmc can only supports pio and internal dma now. Thus some platforms
>>> using dw-mshc integrated with generic dma can't work in dma mode. So we
>>> submit this patch to achieve it.
>>>
>>> And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
>>> (commit:f95f3850) for the first version of dw_mmc and never be touched since
>>> then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
>>> we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
>>> time. Nowadays, device-tree helps us to support a variety of boards with one
>>> kernel. That's why we need to remove it and decide the transfer mode by reading
>>> dw_mmc's HCON reg at runtime.
>>>
>>> This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
>>> to make the running.
>>>
>>> Patch does the following things:
>>> - remove CONFIG_MMC_DW_IDMAC config option
>>> - add bindings for edmac used by synopsys-dw-mshc
>>>    at runtime
>>> - add edmac support for synopsys-dw-mshc
>>>
>>> Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
>>>
>>>
>>> Changes in v4:
>>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>>    transfer mode.
>>> - remove all bt-bindings' changes since we don't need new properities.
>>> - check transfer mode at runtime by reading HCON reg
>>> - spilt defconfig changes for each sub-architecture
>>> - fix the title of cover letter
>>> - reuse some code for reducing code size
>>>
>>> Changes in v3:
>>> - choose transfer mode at runtime
>>> - remove all CONFIG_MMC_DW_IDMAC config option
>>> - add supports-idmac property for some platforms
>>>
>>> Changes in v2:
>>> - Fix typo of dev_info msg
>>> - remove unused dmach from declaration of dw_mci_dma_slave
>>>
>>> Shawn Lin (9):
>>>    mmc: dw_mmc: Add external dma interface support
>>>    Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
>>>    mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>
>>>   .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |  25 ++
>>>   arch/arc/configs/axs101_defconfig                  |   1 -
>>>   arch/arc/configs/axs103_defconfig                  |   1 -
>>>   arch/arc/configs/axs103_smp_defconfig              |   1 -
>>>   arch/arm/configs/exynos_defconfig                  |   1 -
>>>   arch/arm/configs/hisi_defconfig                    |   1 -
>>>   arch/arm/configs/lpc18xx_defconfig                 |   1 -
>>>   arch/arm/configs/multi_v7_defconfig                |   1 -
>>>   arch/arm/configs/zx_defconfig                      |   1 -
>>>   arch/mips/configs/pistachio_defconfig              |   1 -
>>>   drivers/mmc/host/Kconfig                           |  11 +-
>>>   drivers/mmc/host/dw_mmc-pltfm.c                    |   2 +
>>>   drivers/mmc/host/dw_mmc.c                          | 258 +++++++++++++++++----
>>>   include/linux/mmc/dw_mmc.h                         |  27 ++-
>>>   14 files changed, 257 insertions(+), 75 deletions(-)
>>>
>>
>>
>>
> 
> 

[RFC PATCH v4 0/9]

[Jaehoon Chung]

On 08/06/2015 04:31 PM, Shawn Lin wrote:
> ? 2015/8/6 15:08, Jaehoon Chung ??:
>> Hi, Shawn.
>>
>> I remembered that Krzysztof has mentioned "Fix the title of cover letter."
>> Your cover letter's title is nothing.. "[RFC PATCH v4 0/9] " ??
>> [RFC PATCH v4 0/9] your title...
>  Sorry, I forgot it, and will fix in next version...

No problem :) 
At next time,  add the title at your cover-letter, plz.

Best Regards,
Jaehoon Chung

> 
>> Best Regards,
>> Jaehoon Chung
>>
>> On 08/06/2015 03:44 PM, Shawn Lin wrote:
>>> Add external dma support for Synopsys MSHC
>>>
>>> Synopsys DesignWare mobile storage host controller supports three
>>> types of transfer mode: pio, internal dma and external dma. However,
>>> dw_mmc can only supports pio and internal dma now. Thus some platforms
>>> using dw-mshc integrated with generic dma can't work in dma mode. So we
>>> submit this patch to achieve it.
>>>
>>> And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
>>> (commit:f95f3850) for the first version of dw_mmc and never be touched since
>>> then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
>>> we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
>>> time. Nowadays, device-tree helps us to support a variety of boards with one
>>> kernel. That's why we need to remove it and decide the transfer mode by reading
>>> dw_mmc's HCON reg at runtime.
>>>
>>> This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
>>> to make the running.
>>>
>>> Patch does the following things:
>>> - remove CONFIG_MMC_DW_IDMAC config option
>>> - add bindings for edmac used by synopsys-dw-mshc
>>>    at runtime
>>> - add edmac support for synopsys-dw-mshc
>>>
>>> Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
>>>
>>>
>>> Changes in v4:
>>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>>    transfer mode.
>>> - remove all bt-bindings' changes since we don't need new properities.
>>> - check transfer mode at runtime by reading HCON reg
>>> - spilt defconfig changes for each sub-architecture
>>> - fix the title of cover letter
>>> - reuse some code for reducing code size
>>>
>>> Changes in v3:
>>> - choose transfer mode at runtime
>>> - remove all CONFIG_MMC_DW_IDMAC config option
>>> - add supports-idmac property for some platforms
>>>
>>> Changes in v2:
>>> - Fix typo of dev_info msg
>>> - remove unused dmach from declaration of dw_mci_dma_slave
>>>
>>> Shawn Lin (9):
>>>    mmc: dw_mmc: Add external dma interface support
>>>    Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
>>>    mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>    arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>
>>>   .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |  25 ++
>>>   arch/arc/configs/axs101_defconfig                  |   1 -
>>>   arch/arc/configs/axs103_defconfig                  |   1 -
>>>   arch/arc/configs/axs103_smp_defconfig              |   1 -
>>>   arch/arm/configs/exynos_defconfig                  |   1 -
>>>   arch/arm/configs/hisi_defconfig                    |   1 -
>>>   arch/arm/configs/lpc18xx_defconfig                 |   1 -
>>>   arch/arm/configs/multi_v7_defconfig                |   1 -
>>>   arch/arm/configs/zx_defconfig                      |   1 -
>>>   arch/mips/configs/pistachio_defconfig              |   1 -
>>>   drivers/mmc/host/Kconfig                           |  11 +-
>>>   drivers/mmc/host/dw_mmc-pltfm.c                    |   2 +
>>>   drivers/mmc/host/dw_mmc.c                          | 258 +++++++++++++++++----
>>>   include/linux/mmc/dw_mmc.h                         |  27 ++-
>>>   14 files changed, 257 insertions(+), 75 deletions(-)
>>>
>>
>>
>>
> 
>