All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kukjin Kim <kgene@kernel.org>
To: arm@kernel.org, Arnd Bergmann <arnd@arndb.de>,
	'Olof Johansson' <olof@lixom.net>,
	Kevin Hilman <khilman@linaro.org>
Cc: "linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-samsung-soc@vger.kernel.org"
	<linux-samsung-soc@vger.kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: [GIT PULL v2 0/5] Samsung updates for v4.3
Date: Fri, 14 Aug 2015 03:42:31 +0900	[thread overview]
Message-ID: <55CCE517.2070003@kernel.org> (raw)

Hello Arnd, Olof, Kevin

Here is re-spin of pull request for Samsung stuff for v4.3 as per Olof's
suggestion.

Most of this pull-requests are to switch to support generic cpufreq
driver for exynos3250, 4210, 4412 and 5250 and several exynos dt updates.

Note as I commented in each tag, each pull-request(signed tag) has a
dependency with each other, so please keep the ordering in this time.

1) tags/samsung-clk-driver
2) tags/samsung-late-dt
3) tags/samsung-soc
4) tags/samsung-late-cpufreq-driver
5) tags/samsung-defconfig-new

If any problems, please kindly let me know.

Thanks,
Kukjin

Alexis Ballier (1):
      ARM: dts: enable SPI1 for exynos4412-odroidu3

Anand Moon (1):
      ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3

Bartlomiej Zolnierkiewicz (5):
      cpufreq: exynos: remove exynos5250 specific cpufreq driver support
      clk: exynos4x12: add cpu clock configuration data and instantiate
cpu clock
      cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
      ARM: dts: add CPU OPP and regulator supply property for exynos4x12
      ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12

Chanho Park (1):
      ARM: dts: add exynos5422-cpus.dtsi to correct cpu order

Chanwoo Choi (4):
      clk: exynos3250: Add cpu clock configuration data and instaniate
cpu clock
      ARM: EXYNOS: Add exynos3250 compatible to use generic cpufreq driver
      ARM: dts: Add CPU OPP and regulator supply property for exynos3250
      ARM: dts: Add CPU cooling binding for exynos3250 boards

Javier Martinez Canillas (4):
      ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
      ARM: multi_v7_defconfig: Enable NTC Thermistors support
      ARM: exynos_defconfig: Enable NTC Thermistors support
      ARM: multi_v7_defconfig: Enable max77802 regulator

Jonas Rabenstein (1):
      cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o

Krzysztof Kozlowski (1):
      ARM: exynos_defconfig: Enable cpufreq-dt driver

Marek Szyprowski (1):
      ARM: dts: add iommu property to JPEG device for exynos4

Michal Suchanek (1):
      ARM: dts: Add SPI CS on exynos5250-snow

Thomas Abraham (3):
      clk: exynos5250: add cpu clock configuration data and instantiate
cpu clock
      ARM: EXYNOS: switch to using generic cpufreq driver for exynos5250
      ARM: dts: add CPU OPP and regulator supply property for exynos5250

 arch/arm/boot/dts/exynos3250-monk.dts              |  19 ++
 arch/arm/boot/dts/exynos3250-rinato.dts            |  19 ++
 arch/arm/boot/dts/exynos3250.dtsi                  |  16 ++
 arch/arm/boot/dts/exynos4.dtsi                     |   1 +
 arch/arm/boot/dts/exynos4212.dtsi                  |  81 +++++++
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi    |   4 +
 arch/arm/boot/dts/exynos4412-odroidu3.dts          |   8 +
 arch/arm/boot/dts/exynos4412-origen.dts            |   4 +
 arch/arm/boot/dts/exynos4412-trats2.dts            |   4 +
 arch/arm/boot/dts/exynos4412.dtsi                  |  83 ++++++++
 arch/arm/boot/dts/exynos5250-arndale.dts           |   4 +
 arch/arm/boot/dts/exynos5250-smdk5250.dts          |   4 +
 arch/arm/boot/dts/exynos5250-snow.dts              |   5 +
 arch/arm/boot/dts/exynos5250-spring.dts            |   4 +
 arch/arm/boot/dts/exynos5250.dtsi                  |  22 ++
 arch/arm/boot/dts/exynos5422-cpus.dtsi             |  81 +++++++
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |   1 +
 arch/arm/configs/exynos_defconfig                  |   5 +
 arch/arm/configs/multi_v7_defconfig                |   5 +-
 arch/arm/mach-exynos/Kconfig                       |   2 +
 arch/arm/mach-exynos/exynos.c                      |   4 +
 drivers/clk/samsung/clk-exynos3250.c               |  32 ++-
 drivers/clk/samsung/clk-exynos4.c                  |  50 +++++
 drivers/clk/samsung/clk-exynos5250.c               |  31 +++
 drivers/cpufreq/Kconfig.arm                        |  49 -----
 drivers/cpufreq/Makefile                           |   4 -
 drivers/cpufreq/exynos-cpufreq.c                   | 237
---------------------
 drivers/cpufreq/exynos-cpufreq.h                   |  89 --------
 drivers/cpufreq/exynos4x12-cpufreq.c               | 236
--------------------
 drivers/cpufreq/exynos5250-cpufreq.c               | 210 ------------------
 include/dt-bindings/clock/exynos3250.h             |   1 +
 include/dt-bindings/clock/exynos5250.h             |   1 +
 32 files changed, 487 insertions(+), 829 deletions(-)

WARNING: multiple messages have this Message-ID (diff)
From: kgene@kernel.org (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL v2 0/5] Samsung updates for v4.3
Date: Fri, 14 Aug 2015 03:42:31 +0900	[thread overview]
Message-ID: <55CCE517.2070003@kernel.org> (raw)

Hello Arnd, Olof, Kevin

Here is re-spin of pull request for Samsung stuff for v4.3 as per Olof's
suggestion.

Most of this pull-requests are to switch to support generic cpufreq
driver for exynos3250, 4210, 4412 and 5250 and several exynos dt updates.

Note as I commented in each tag, each pull-request(signed tag) has a
dependency with each other, so please keep the ordering in this time.

1) tags/samsung-clk-driver
2) tags/samsung-late-dt
3) tags/samsung-soc
4) tags/samsung-late-cpufreq-driver
5) tags/samsung-defconfig-new

If any problems, please kindly let me know.

Thanks,
Kukjin

Alexis Ballier (1):
      ARM: dts: enable SPI1 for exynos4412-odroidu3

Anand Moon (1):
      ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3

Bartlomiej Zolnierkiewicz (5):
      cpufreq: exynos: remove exynos5250 specific cpufreq driver support
      clk: exynos4x12: add cpu clock configuration data and instantiate
cpu clock
      cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
      ARM: dts: add CPU OPP and regulator supply property for exynos4x12
      ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12

Chanho Park (1):
      ARM: dts: add exynos5422-cpus.dtsi to correct cpu order

Chanwoo Choi (4):
      clk: exynos3250: Add cpu clock configuration data and instaniate
cpu clock
      ARM: EXYNOS: Add exynos3250 compatible to use generic cpufreq driver
      ARM: dts: Add CPU OPP and regulator supply property for exynos3250
      ARM: dts: Add CPU cooling binding for exynos3250 boards

Javier Martinez Canillas (4):
      ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
      ARM: multi_v7_defconfig: Enable NTC Thermistors support
      ARM: exynos_defconfig: Enable NTC Thermistors support
      ARM: multi_v7_defconfig: Enable max77802 regulator

Jonas Rabenstein (1):
      cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o

Krzysztof Kozlowski (1):
      ARM: exynos_defconfig: Enable cpufreq-dt driver

Marek Szyprowski (1):
      ARM: dts: add iommu property to JPEG device for exynos4

Michal Suchanek (1):
      ARM: dts: Add SPI CS on exynos5250-snow

Thomas Abraham (3):
      clk: exynos5250: add cpu clock configuration data and instantiate
cpu clock
      ARM: EXYNOS: switch to using generic cpufreq driver for exynos5250
      ARM: dts: add CPU OPP and regulator supply property for exynos5250

 arch/arm/boot/dts/exynos3250-monk.dts              |  19 ++
 arch/arm/boot/dts/exynos3250-rinato.dts            |  19 ++
 arch/arm/boot/dts/exynos3250.dtsi                  |  16 ++
 arch/arm/boot/dts/exynos4.dtsi                     |   1 +
 arch/arm/boot/dts/exynos4212.dtsi                  |  81 +++++++
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi    |   4 +
 arch/arm/boot/dts/exynos4412-odroidu3.dts          |   8 +
 arch/arm/boot/dts/exynos4412-origen.dts            |   4 +
 arch/arm/boot/dts/exynos4412-trats2.dts            |   4 +
 arch/arm/boot/dts/exynos4412.dtsi                  |  83 ++++++++
 arch/arm/boot/dts/exynos5250-arndale.dts           |   4 +
 arch/arm/boot/dts/exynos5250-smdk5250.dts          |   4 +
 arch/arm/boot/dts/exynos5250-snow.dts              |   5 +
 arch/arm/boot/dts/exynos5250-spring.dts            |   4 +
 arch/arm/boot/dts/exynos5250.dtsi                  |  22 ++
 arch/arm/boot/dts/exynos5422-cpus.dtsi             |  81 +++++++
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |   1 +
 arch/arm/configs/exynos_defconfig                  |   5 +
 arch/arm/configs/multi_v7_defconfig                |   5 +-
 arch/arm/mach-exynos/Kconfig                       |   2 +
 arch/arm/mach-exynos/exynos.c                      |   4 +
 drivers/clk/samsung/clk-exynos3250.c               |  32 ++-
 drivers/clk/samsung/clk-exynos4.c                  |  50 +++++
 drivers/clk/samsung/clk-exynos5250.c               |  31 +++
 drivers/cpufreq/Kconfig.arm                        |  49 -----
 drivers/cpufreq/Makefile                           |   4 -
 drivers/cpufreq/exynos-cpufreq.c                   | 237
---------------------
 drivers/cpufreq/exynos-cpufreq.h                   |  89 --------
 drivers/cpufreq/exynos4x12-cpufreq.c               | 236
--------------------
 drivers/cpufreq/exynos5250-cpufreq.c               | 210 ------------------
 include/dt-bindings/clock/exynos3250.h             |   1 +
 include/dt-bindings/clock/exynos5250.h             |   1 +
 32 files changed, 487 insertions(+), 829 deletions(-)

             reply	other threads:[~2015-08-13 18:42 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-13 18:42 Kukjin Kim [this message]
2015-08-13 18:42 ` [GIT PULL v2 0/5] Samsung updates for v4.3 Kukjin Kim
2015-08-13 18:48 ` [GIT PULL v2 1/5] Samsung clk driver " Kukjin Kim
2015-08-13 18:48   ` Kukjin Kim
2015-08-21  1:35   ` Olof Johansson
2015-08-21  1:35     ` Olof Johansson
2015-08-13 18:50 ` [GIT PULL v2 2/5] Samsung 2nd DT " Kukjin Kim
2015-08-13 18:50   ` Kukjin Kim
2015-08-21  1:37   ` Olof Johansson
2015-08-21  1:37     ` Olof Johansson
2015-08-13 18:51 ` [GIT PULL v2 3/5] Samsung SoC " Kukjin Kim
2015-08-13 18:51   ` Kukjin Kim
2015-08-21  1:38   ` Olof Johansson
2015-08-21  1:38     ` Olof Johansson
2015-08-13 18:52 ` [GIT PULL v2 4/5] Samsung cpufreq driver " Kukjin Kim
2015-08-13 18:52   ` Kukjin Kim
2015-08-21  1:39   ` Olof Johansson
2015-08-21  1:39     ` Olof Johansson
2015-08-13 18:53 ` [GIT PULL v2 5/5] Samsung defconfig " Kukjin Kim
2015-08-13 18:53   ` Kukjin Kim
2015-08-21  1:40   ` Olof Johansson
2015-08-21  1:40     ` Olof Johansson
2015-08-20  2:25 ` [GIT PULL v2 0/5] Samsung " Kukjin Kim
2015-08-20  2:25   ` Kukjin Kim
2015-08-21  1:34 ` Olof Johansson
2015-08-21  1:34   ` Olof Johansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55CCE517.2070003@kernel.org \
    --to=kgene@kernel.org \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=k.kozlowski@samsung.com \
    --cc=khilman@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=olof@lixom.net \
    --cc=rjw@sisk.pl \
    --cc=s.nawrocki@samsung.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.