* [PATCHi v2] ARM: dts: Fix bootup issue on smdk5250
@ 2015-08-18 6:29 ` Pankaj Dubey
0 siblings, 0 replies; 4+ messages in thread
From: Pankaj Dubey @ 2015-08-18 6:29 UTC (permalink / raw)
To: linux-samsung-soc, linux-kernel, linux-arm-kernel
Cc: k.kozlowski, kgene, robh+dt, Yadwinder Singh Brar, Pankaj Dubey
From: Yadwinder Singh Brar <yadi.brar01@gmail.com>
With default config on smdk5250 latest tree throws below message :
[ 2.226049] thermal thermal_zone0: critical temperature reached(224 C),shutting down
[ 2.227840] reboot: Failed to start orderly shutdown: forcing the issue
and hangs randomly because it reads wrong temperature value.
I can't figure out any direct relation between LDO10 and TMU from board
schematics which I have. So making LDO10 always-on to fix issue for now.
Signed-off-by: Yadwinder Singh Brar <yadi.brar01@gmail.com>
[pankaj.dubey: resubmitted after rebasing to latest kgene tree]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
Resending this patch after rebasing. Previous discussion can be found here [1]
[1]: http://www.spinics.net/lists/linux-samsung-soc/msg39100.html
Changes since v1:
- Rebased on latest kgene tree, test booting and s2r on SMDK5250 board.
- Removed Yadwinder Singh's Samsung's email id as it's no more valid.
- Added my Signed-off-by for touching this file and patch.
arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 15aea76..c625e71 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -197,6 +197,7 @@
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo11_reg: LDO11 {
--
2.4.5
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCHi v2] ARM: dts: Fix bootup issue on smdk5250
@ 2015-08-18 6:29 ` Pankaj Dubey
0 siblings, 0 replies; 4+ messages in thread
From: Pankaj Dubey @ 2015-08-18 6:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Yadwinder Singh Brar <yadi.brar01@gmail.com>
With default config on smdk5250 latest tree throws below message :
[ 2.226049] thermal thermal_zone0: critical temperature reached(224 C),shutting down
[ 2.227840] reboot: Failed to start orderly shutdown: forcing the issue
and hangs randomly because it reads wrong temperature value.
I can't figure out any direct relation between LDO10 and TMU from board
schematics which I have. So making LDO10 always-on to fix issue for now.
Signed-off-by: Yadwinder Singh Brar <yadi.brar01@gmail.com>
[pankaj.dubey: resubmitted after rebasing to latest kgene tree]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
Resending this patch after rebasing. Previous discussion can be found here [1]
[1]: http://www.spinics.net/lists/linux-samsung-soc/msg39100.html
Changes since v1:
- Rebased on latest kgene tree, test booting and s2r on SMDK5250 board.
- Removed Yadwinder Singh's Samsung's email id as it's no more valid.
- Added my Signed-off-by for touching this file and patch.
arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 15aea76..c625e71 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -197,6 +197,7 @@
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo11_reg: LDO11 {
--
2.4.5
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCHi v2] ARM: dts: Fix bootup issue on smdk5250
2015-08-18 6:29 ` Pankaj Dubey
@ 2015-08-18 7:02 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2015-08-18 7:02 UTC (permalink / raw)
To: Pankaj Dubey, linux-samsung-soc, linux-kernel, linux-arm-kernel
Cc: kgene, robh+dt, Yadwinder Singh Brar
On 18.08.2015 15:29, Pankaj Dubey wrote:
> From: Yadwinder Singh Brar <yadi.brar01@gmail.com>
>
> With default config on smdk5250 latest tree throws below message :
>
> [ 2.226049] thermal thermal_zone0: critical temperature reached(224 C),shutting down
> [ 2.227840] reboot: Failed to start orderly shutdown: forcing the issue
>
> and hangs randomly because it reads wrong temperature value.
>
> I can't figure out any direct relation between LDO10 and TMU from board
> schematics which I have. So making LDO10 always-on to fix issue for now.
>
> Signed-off-by: Yadwinder Singh Brar <yadi.brar01@gmail.com>
> [pankaj.dubey: resubmitted after rebasing to latest kgene tree]
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
> Resending this patch after rebasing. Previous discussion can be found here [1]
>
>
> [1]: http://www.spinics.net/lists/linux-samsung-soc/msg39100.html
>
> Changes since v1:
> - Rebased on latest kgene tree, test booting and s2r on SMDK5250 board.
> - Removed Yadwinder Singh's Samsung's email id as it's no more valid.
> - Added my Signed-off-by for touching this file and patch.
>
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 +
> 1 file changed, 1 insertion(+)
Since previous discussion ([1] above) there have not been any updates on
cause of this issue so I think this should go in:
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCHi v2] ARM: dts: Fix bootup issue on smdk5250
@ 2015-08-18 7:02 ` Krzysztof Kozlowski
0 siblings, 0 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2015-08-18 7:02 UTC (permalink / raw)
To: linux-arm-kernel
On 18.08.2015 15:29, Pankaj Dubey wrote:
> From: Yadwinder Singh Brar <yadi.brar01@gmail.com>
>
> With default config on smdk5250 latest tree throws below message :
>
> [ 2.226049] thermal thermal_zone0: critical temperature reached(224 C),shutting down
> [ 2.227840] reboot: Failed to start orderly shutdown: forcing the issue
>
> and hangs randomly because it reads wrong temperature value.
>
> I can't figure out any direct relation between LDO10 and TMU from board
> schematics which I have. So making LDO10 always-on to fix issue for now.
>
> Signed-off-by: Yadwinder Singh Brar <yadi.brar01@gmail.com>
> [pankaj.dubey: resubmitted after rebasing to latest kgene tree]
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
> Resending this patch after rebasing. Previous discussion can be found here [1]
>
>
> [1]: http://www.spinics.net/lists/linux-samsung-soc/msg39100.html
>
> Changes since v1:
> - Rebased on latest kgene tree, test booting and s2r on SMDK5250 board.
> - Removed Yadwinder Singh's Samsung's email id as it's no more valid.
> - Added my Signed-off-by for touching this file and patch.
>
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 +
> 1 file changed, 1 insertion(+)
Since previous discussion ([1] above) there have not been any updates on
cause of this issue so I think this should go in:
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-08-18 7:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-18 6:29 [PATCHi v2] ARM: dts: Fix bootup issue on smdk5250 Pankaj Dubey
2015-08-18 6:29 ` Pankaj Dubey
2015-08-18 7:02 ` Krzysztof Kozlowski
2015-08-18 7:02 ` Krzysztof Kozlowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.