From: Kishon Vijay Abraham I <kishon@ti.com>
To: ulf.hansson@linaro.org, afenkart@gmail.com, tony@atomide.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org
Cc: nsekhar@ti.com
Subject: Re: [PATCH v2 00/16] omap_hsmmc: regulator usage cleanup and fixes
Date: Thu, 20 Aug 2015 18:06:03 +0530 [thread overview]
Message-ID: <55D5C9B3.80802@ti.com> (raw)
In-Reply-To: <1438604801-11823-1-git-send-email-kishon@ti.com>
Hi,
On Monday 03 August 2015 05:56 PM, Kishon Vijay Abraham I wrote:
> Changes from v1:
> *) return on -EPROBE_DEFER and other fatal errors. (Don't return only
> if the return value is -ENODEV)
> *) Remove the beagle x15 dts patch. It can be part of a different
> series.
> *) Avoid using regulator_is_enabled for vqmmc since if the regulator
> is shared and the other users are not using regulator_is_enabled
> then there can be unbalanced regulator_enable/regulator_disable
>
> This patch series does the following
> *) Uses devm_regulator_get_optional() for vmmc and then removes the
> CONFIG_REGULATOR check altogether.
> *) return on -EPROBE_DEFER and any other fatal errors
> *) enable/disable vmmc_aux regulator based on prior state
>
> I've pushed this patch series to
> git://git.ti.com/linux-phy/linux-phy.git mmc_regulator_cleanup_fixes_v2
>
> Please note the branch also has the pbias fixes [1] & [2].
> [1] -> https://lkml.org/lkml/2015/7/27/358
> [2] -> https://lkml.org/lkml/2015/7/27/391
>
> This series is in preparation for implementing the voltage switch
> sequence so that UHS cards can be supported.
>
> Did basic read/write test in J6, J6 Eco, Beagle-x15, AM437x EVM,
> Beaglebone black, OMAP5 uEVM and OMAP4 PANDA.
I have now done read/write test in omap3 beagle-xm with this series!
Thanks
Kishon
>
> Kishon Vijay Abraham I (15):
> mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc
> mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get
> mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get()
> mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator
> mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc
> mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage
> mmc: host: omap_hsmmc: return error if any of the regulator APIs fail
> mmc: host: omap_hsmmc: add separate functions for enable/disable
> supply
> mmc: host: omap_hsmmc: add separate function to set pbias
> mmc: host: omap_hsmmc: avoid pbias regulator enable on power off
> mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator
> state
> mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on
> previous state
> mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status
> mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage
> mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check
>
> Roger Quadros (1):
> mmc: host: omap_hsmmc: use "mmc_of_parse_voltage" to get ocr_avail
>
> .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 2 +
> drivers/mmc/host/omap_hsmmc.c | 340 +++++++++++++-------
> 2 files changed, 224 insertions(+), 118 deletions(-)
>
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <ulf.hansson@linaro.org>, <afenkart@gmail.com>,
<tony@atomide.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
<linux-omap@vger.kernel.org>
Cc: <nsekhar@ti.com>
Subject: Re: [PATCH v2 00/16] omap_hsmmc: regulator usage cleanup and fixes
Date: Thu, 20 Aug 2015 18:06:03 +0530 [thread overview]
Message-ID: <55D5C9B3.80802@ti.com> (raw)
In-Reply-To: <1438604801-11823-1-git-send-email-kishon@ti.com>
Hi,
On Monday 03 August 2015 05:56 PM, Kishon Vijay Abraham I wrote:
> Changes from v1:
> *) return on -EPROBE_DEFER and other fatal errors. (Don't return only
> if the return value is -ENODEV)
> *) Remove the beagle x15 dts patch. It can be part of a different
> series.
> *) Avoid using regulator_is_enabled for vqmmc since if the regulator
> is shared and the other users are not using regulator_is_enabled
> then there can be unbalanced regulator_enable/regulator_disable
>
> This patch series does the following
> *) Uses devm_regulator_get_optional() for vmmc and then removes the
> CONFIG_REGULATOR check altogether.
> *) return on -EPROBE_DEFER and any other fatal errors
> *) enable/disable vmmc_aux regulator based on prior state
>
> I've pushed this patch series to
> git://git.ti.com/linux-phy/linux-phy.git mmc_regulator_cleanup_fixes_v2
>
> Please note the branch also has the pbias fixes [1] & [2].
> [1] -> https://lkml.org/lkml/2015/7/27/358
> [2] -> https://lkml.org/lkml/2015/7/27/391
>
> This series is in preparation for implementing the voltage switch
> sequence so that UHS cards can be supported.
>
> Did basic read/write test in J6, J6 Eco, Beagle-x15, AM437x EVM,
> Beaglebone black, OMAP5 uEVM and OMAP4 PANDA.
I have now done read/write test in omap3 beagle-xm with this series!
Thanks
Kishon
>
> Kishon Vijay Abraham I (15):
> mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc
> mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get
> mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get()
> mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator
> mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc
> mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage
> mmc: host: omap_hsmmc: return error if any of the regulator APIs fail
> mmc: host: omap_hsmmc: add separate functions for enable/disable
> supply
> mmc: host: omap_hsmmc: add separate function to set pbias
> mmc: host: omap_hsmmc: avoid pbias regulator enable on power off
> mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator
> state
> mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on
> previous state
> mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status
> mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage
> mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check
>
> Roger Quadros (1):
> mmc: host: omap_hsmmc: use "mmc_of_parse_voltage" to get ocr_avail
>
> .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 2 +
> drivers/mmc/host/omap_hsmmc.c | 340 +++++++++++++-------
> 2 files changed, 224 insertions(+), 118 deletions(-)
>
next prev parent reply other threads:[~2015-08-20 12:36 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-03 12:26 [PATCH v2 00/16] omap_hsmmc: regulator usage cleanup and fixes Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 01/16] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 02/16] mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 03/16] mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get() Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 04/16] mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 05/16] mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 06/16] mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 07/16] mmc: host: omap_hsmmc: return error if any of the regulator APIs fail Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 08/16] mmc: host: omap_hsmmc: add separate functions for enable/disable supply Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 09/16] mmc: host: omap_hsmmc: add separate function to set pbias Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 10/16] mmc: host: omap_hsmmc: avoid pbias regulator enable on power off Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 11/16] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 12/16] mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 13/16] mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 14/16] mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 15/16] mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-03 12:26 ` [PATCH v2 16/16] mmc: host: omap_hsmmc: use "mmc_of_parse_voltage" to get ocr_avail Kishon Vijay Abraham I
2015-08-03 12:26 ` Kishon Vijay Abraham I
2015-08-25 14:50 ` Ulf Hansson
2015-08-26 12:21 ` Kishon Vijay Abraham I
2015-11-11 10:26 ` Roger Quadros
2015-11-11 11:40 ` Ulf Hansson
2015-08-20 12:36 ` Kishon Vijay Abraham I [this message]
2015-08-20 12:36 ` [PATCH v2 00/16] omap_hsmmc: regulator usage cleanup and fixes Kishon Vijay Abraham I
2015-08-21 7:41 ` Tony Lindgren
2015-08-21 13:27 ` Kishon Vijay Abraham I
2015-08-21 13:27 ` Kishon Vijay Abraham I
2015-08-25 11:50 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55D5C9B3.80802@ti.com \
--to=kishon@ti.com \
--cc=afenkart@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.