From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
To: bhelgaas@google.com, rjw@rjwysocki.net, lenb@kernel.org,
catalin.marinas@arm.com, will.deacon@arm.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Murali Karicheri <m-karicheri2@ti.com>,
linux-acpi@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
hanjun.guo@linaro.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] pci: acpi: Generic function for setting up PCI device DMA coherency
Date: Mon, 24 Aug 2015 23:41:29 +0700 [thread overview]
Message-ID: <55DB4939.5070605@amd.com> (raw)
In-Reply-To: <1439459925-2361-1-git-send-email-Suravee.Suthikulpanit@amd.com>
Hi,
Ping. Does anyone have any comments or suggestions?
Thanks,
Suravee
On 8/13/15 16:58, Suravee Suthikulpanit wrote:
> This patch refactors of_pci_dma_configure() into a more generic
> pci_dma_configure(), which can be reused by non-OF code.
> Then, it adds support for setting up PCI device DMA coherency from
> ACPI _CCA object that should normally be specified in the DSDT node
> of its PCI host bridge..
>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> CC: Bjorn Helgaas <bhelgaas@google.com>
> CC: Catalin Marinas <catalin.marinas@arm.com>
> CC: Will Deacon <will.deacon@arm.com>
> CC: Rafael J. Wysocki <rjw@rjwysocki.net>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: Murali Karicheri <m-karicheri2@ti.com>
> ---
> Note: According to the ACPI spec, the _CCA attribute is required
> for ARM64. Therefore, this patch is a pre-req for ACPI PCI
> support for ARM64 which is currently in development.
>
> Also, this should not affect other architectures since
> if CCA is not required, the default value is coherent.
> Please see include/acpi/acpi_bus.h: acpi_check_dma() and
> drivers/acpi/scan.c: acpi_init_coherency() for more information
>
> drivers/of/of_pci.c | 20 --------------------
> drivers/pci/probe.c | 35 +++++++++++++++++++++++++++++++++--
> include/linux/of_pci.h | 3 ---
> 3 files changed, 33 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> index 5751dc5..b66ee4e 100644
> --- a/drivers/of/of_pci.c
> +++ b/drivers/of/of_pci.c
> @@ -117,26 +117,6 @@ int of_get_pci_domain_nr(struct device_node *node)
> }
> EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
>
> -/**
> - * of_pci_dma_configure - Setup DMA configuration
> - * @dev: ptr to pci_dev struct of the PCI device
> - *
> - * Function to update PCI devices's DMA configuration using the same
> - * info from the OF node of host bridge's parent (if any).
> - */
> -void of_pci_dma_configure(struct pci_dev *pci_dev)
> -{
> - struct device *dev = &pci_dev->dev;
> - struct device *bridge = pci_get_host_bridge_device(pci_dev);
> -
> - if (!bridge->parent)
> - return;
> -
> - of_dma_configure(dev, bridge->parent->of_node);
> - pci_put_host_bridge_device(bridge);
> -}
> -EXPORT_SYMBOL_GPL(of_pci_dma_configure);
> -
> #if defined(CONFIG_OF_ADDRESS)
> /**
> * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index cefd636..e2fcd3b 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -6,12 +6,14 @@
> #include <linux/delay.h>
> #include <linux/init.h>
> #include <linux/pci.h>
> -#include <linux/of_pci.h>
> +#include <linux/of_device.h>
> #include <linux/pci_hotplug.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> #include <linux/cpumask.h>
> #include <linux/pci-aspm.h>
> +#include <linux/acpi.h>
> +#include <linux/property.h>
> #include <asm-generic/pci-bridge.h>
> #include "pci.h"
>
> @@ -1544,6 +1546,35 @@ static void pci_init_capabilities(struct pci_dev *dev)
> pci_enable_acs(dev);
> }
>
> +/**
> + * pci_dma_configure - Setup DMA configuration
> + * @pci_dev: ptr to pci_dev struct of the PCI device
> + *
> + * Function to update PCI devices's DMA configuration using the same
> + * info from the OF node or ACPI node of host bridge's parent (if any).
> + */
> +static void pci_dma_configure(struct pci_dev *pci_dev)
> +{
> + struct device *dev = &pci_dev->dev;
> + struct device *bridge = pci_get_host_bridge_device(pci_dev);
> + struct acpi_device *adev;
> + bool coherent;
> +
> + if (has_acpi_companion(bridge)) {
> + adev = to_acpi_node(bridge->fwnode);
> + if (acpi_check_dma(adev, &coherent))
> + arch_setup_dma_ops(dev, 0, 0, NULL, coherent);
> + } else {
> + struct device *host = bridge->parent;
> + if (!host)
> + return;
> +
> + of_dma_configure(dev, host->of_node);
> + }
> +
> + pci_put_host_bridge_device(bridge);
> +}
> +
> void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> {
> int ret;
> @@ -1557,7 +1588,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> dev->dev.dma_mask = &dev->dma_mask;
> dev->dev.dma_parms = &dev->dma_parms;
> dev->dev.coherent_dma_mask = 0xffffffffull;
> - of_pci_dma_configure(dev);
> + pci_dma_configure(dev);
>
> pci_set_dma_max_seg_size(dev, 65536);
> pci_set_dma_seg_boundary(dev, 0xffffffff);
> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
> index 29fd3fe..ce0e5ab 100644
> --- a/include/linux/of_pci.h
> +++ b/include/linux/of_pci.h
> @@ -16,7 +16,6 @@ int of_pci_get_devfn(struct device_node *np);
> int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
> int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
> int of_get_pci_domain_nr(struct device_node *node);
> -void of_pci_dma_configure(struct pci_dev *pci_dev);
> #else
> static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
> {
> @@ -51,8 +50,6 @@ of_get_pci_domain_nr(struct device_node *node)
> {
> return -1;
> }
> -
> -static inline void of_pci_dma_configure(struct pci_dev *pci_dev) { }
> #endif
>
> #if defined(CONFIG_OF_ADDRESS)
>
WARNING: multiple messages have this Message-ID (diff)
From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
To: <bhelgaas@google.com>, <rjw@rjwysocki.net>, <lenb@kernel.org>,
<catalin.marinas@arm.com>, <will.deacon@arm.com>
Cc: <hanjun.guo@linaro.org>, <linux-acpi@vger.kernel.org>,
<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Rob Herring <robh+dt@kernel.org>,
Murali Karicheri <m-karicheri2@ti.com>
Subject: Re: [PATCH] pci: acpi: Generic function for setting up PCI device DMA coherency
Date: Mon, 24 Aug 2015 23:41:29 +0700 [thread overview]
Message-ID: <55DB4939.5070605@amd.com> (raw)
In-Reply-To: <1439459925-2361-1-git-send-email-Suravee.Suthikulpanit@amd.com>
Hi,
Ping. Does anyone have any comments or suggestions?
Thanks,
Suravee
On 8/13/15 16:58, Suravee Suthikulpanit wrote:
> This patch refactors of_pci_dma_configure() into a more generic
> pci_dma_configure(), which can be reused by non-OF code.
> Then, it adds support for setting up PCI device DMA coherency from
> ACPI _CCA object that should normally be specified in the DSDT node
> of its PCI host bridge..
>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> CC: Bjorn Helgaas <bhelgaas@google.com>
> CC: Catalin Marinas <catalin.marinas@arm.com>
> CC: Will Deacon <will.deacon@arm.com>
> CC: Rafael J. Wysocki <rjw@rjwysocki.net>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: Murali Karicheri <m-karicheri2@ti.com>
> ---
> Note: According to the ACPI spec, the _CCA attribute is required
> for ARM64. Therefore, this patch is a pre-req for ACPI PCI
> support for ARM64 which is currently in development.
>
> Also, this should not affect other architectures since
> if CCA is not required, the default value is coherent.
> Please see include/acpi/acpi_bus.h: acpi_check_dma() and
> drivers/acpi/scan.c: acpi_init_coherency() for more information
>
> drivers/of/of_pci.c | 20 --------------------
> drivers/pci/probe.c | 35 +++++++++++++++++++++++++++++++++--
> include/linux/of_pci.h | 3 ---
> 3 files changed, 33 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> index 5751dc5..b66ee4e 100644
> --- a/drivers/of/of_pci.c
> +++ b/drivers/of/of_pci.c
> @@ -117,26 +117,6 @@ int of_get_pci_domain_nr(struct device_node *node)
> }
> EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
>
> -/**
> - * of_pci_dma_configure - Setup DMA configuration
> - * @dev: ptr to pci_dev struct of the PCI device
> - *
> - * Function to update PCI devices's DMA configuration using the same
> - * info from the OF node of host bridge's parent (if any).
> - */
> -void of_pci_dma_configure(struct pci_dev *pci_dev)
> -{
> - struct device *dev = &pci_dev->dev;
> - struct device *bridge = pci_get_host_bridge_device(pci_dev);
> -
> - if (!bridge->parent)
> - return;
> -
> - of_dma_configure(dev, bridge->parent->of_node);
> - pci_put_host_bridge_device(bridge);
> -}
> -EXPORT_SYMBOL_GPL(of_pci_dma_configure);
> -
> #if defined(CONFIG_OF_ADDRESS)
> /**
> * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index cefd636..e2fcd3b 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -6,12 +6,14 @@
> #include <linux/delay.h>
> #include <linux/init.h>
> #include <linux/pci.h>
> -#include <linux/of_pci.h>
> +#include <linux/of_device.h>
> #include <linux/pci_hotplug.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> #include <linux/cpumask.h>
> #include <linux/pci-aspm.h>
> +#include <linux/acpi.h>
> +#include <linux/property.h>
> #include <asm-generic/pci-bridge.h>
> #include "pci.h"
>
> @@ -1544,6 +1546,35 @@ static void pci_init_capabilities(struct pci_dev *dev)
> pci_enable_acs(dev);
> }
>
> +/**
> + * pci_dma_configure - Setup DMA configuration
> + * @pci_dev: ptr to pci_dev struct of the PCI device
> + *
> + * Function to update PCI devices's DMA configuration using the same
> + * info from the OF node or ACPI node of host bridge's parent (if any).
> + */
> +static void pci_dma_configure(struct pci_dev *pci_dev)
> +{
> + struct device *dev = &pci_dev->dev;
> + struct device *bridge = pci_get_host_bridge_device(pci_dev);
> + struct acpi_device *adev;
> + bool coherent;
> +
> + if (has_acpi_companion(bridge)) {
> + adev = to_acpi_node(bridge->fwnode);
> + if (acpi_check_dma(adev, &coherent))
> + arch_setup_dma_ops(dev, 0, 0, NULL, coherent);
> + } else {
> + struct device *host = bridge->parent;
> + if (!host)
> + return;
> +
> + of_dma_configure(dev, host->of_node);
> + }
> +
> + pci_put_host_bridge_device(bridge);
> +}
> +
> void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> {
> int ret;
> @@ -1557,7 +1588,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> dev->dev.dma_mask = &dev->dma_mask;
> dev->dev.dma_parms = &dev->dma_parms;
> dev->dev.coherent_dma_mask = 0xffffffffull;
> - of_pci_dma_configure(dev);
> + pci_dma_configure(dev);
>
> pci_set_dma_max_seg_size(dev, 65536);
> pci_set_dma_seg_boundary(dev, 0xffffffff);
> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
> index 29fd3fe..ce0e5ab 100644
> --- a/include/linux/of_pci.h
> +++ b/include/linux/of_pci.h
> @@ -16,7 +16,6 @@ int of_pci_get_devfn(struct device_node *np);
> int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
> int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
> int of_get_pci_domain_nr(struct device_node *node);
> -void of_pci_dma_configure(struct pci_dev *pci_dev);
> #else
> static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
> {
> @@ -51,8 +50,6 @@ of_get_pci_domain_nr(struct device_node *node)
> {
> return -1;
> }
> -
> -static inline void of_pci_dma_configure(struct pci_dev *pci_dev) { }
> #endif
>
> #if defined(CONFIG_OF_ADDRESS)
>
WARNING: multiple messages have this Message-ID (diff)
From: Suravee.Suthikulpanit@amd.com (Suravee Suthikulpanit)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] pci: acpi: Generic function for setting up PCI device DMA coherency
Date: Mon, 24 Aug 2015 23:41:29 +0700 [thread overview]
Message-ID: <55DB4939.5070605@amd.com> (raw)
In-Reply-To: <1439459925-2361-1-git-send-email-Suravee.Suthikulpanit@amd.com>
Hi,
Ping. Does anyone have any comments or suggestions?
Thanks,
Suravee
On 8/13/15 16:58, Suravee Suthikulpanit wrote:
> This patch refactors of_pci_dma_configure() into a more generic
> pci_dma_configure(), which can be reused by non-OF code.
> Then, it adds support for setting up PCI device DMA coherency from
> ACPI _CCA object that should normally be specified in the DSDT node
> of its PCI host bridge..
>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> CC: Bjorn Helgaas <bhelgaas@google.com>
> CC: Catalin Marinas <catalin.marinas@arm.com>
> CC: Will Deacon <will.deacon@arm.com>
> CC: Rafael J. Wysocki <rjw@rjwysocki.net>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: Murali Karicheri <m-karicheri2@ti.com>
> ---
> Note: According to the ACPI spec, the _CCA attribute is required
> for ARM64. Therefore, this patch is a pre-req for ACPI PCI
> support for ARM64 which is currently in development.
>
> Also, this should not affect other architectures since
> if CCA is not required, the default value is coherent.
> Please see include/acpi/acpi_bus.h: acpi_check_dma() and
> drivers/acpi/scan.c: acpi_init_coherency() for more information
>
> drivers/of/of_pci.c | 20 --------------------
> drivers/pci/probe.c | 35 +++++++++++++++++++++++++++++++++--
> include/linux/of_pci.h | 3 ---
> 3 files changed, 33 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> index 5751dc5..b66ee4e 100644
> --- a/drivers/of/of_pci.c
> +++ b/drivers/of/of_pci.c
> @@ -117,26 +117,6 @@ int of_get_pci_domain_nr(struct device_node *node)
> }
> EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
>
> -/**
> - * of_pci_dma_configure - Setup DMA configuration
> - * @dev: ptr to pci_dev struct of the PCI device
> - *
> - * Function to update PCI devices's DMA configuration using the same
> - * info from the OF node of host bridge's parent (if any).
> - */
> -void of_pci_dma_configure(struct pci_dev *pci_dev)
> -{
> - struct device *dev = &pci_dev->dev;
> - struct device *bridge = pci_get_host_bridge_device(pci_dev);
> -
> - if (!bridge->parent)
> - return;
> -
> - of_dma_configure(dev, bridge->parent->of_node);
> - pci_put_host_bridge_device(bridge);
> -}
> -EXPORT_SYMBOL_GPL(of_pci_dma_configure);
> -
> #if defined(CONFIG_OF_ADDRESS)
> /**
> * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index cefd636..e2fcd3b 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -6,12 +6,14 @@
> #include <linux/delay.h>
> #include <linux/init.h>
> #include <linux/pci.h>
> -#include <linux/of_pci.h>
> +#include <linux/of_device.h>
> #include <linux/pci_hotplug.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> #include <linux/cpumask.h>
> #include <linux/pci-aspm.h>
> +#include <linux/acpi.h>
> +#include <linux/property.h>
> #include <asm-generic/pci-bridge.h>
> #include "pci.h"
>
> @@ -1544,6 +1546,35 @@ static void pci_init_capabilities(struct pci_dev *dev)
> pci_enable_acs(dev);
> }
>
> +/**
> + * pci_dma_configure - Setup DMA configuration
> + * @pci_dev: ptr to pci_dev struct of the PCI device
> + *
> + * Function to update PCI devices's DMA configuration using the same
> + * info from the OF node or ACPI node of host bridge's parent (if any).
> + */
> +static void pci_dma_configure(struct pci_dev *pci_dev)
> +{
> + struct device *dev = &pci_dev->dev;
> + struct device *bridge = pci_get_host_bridge_device(pci_dev);
> + struct acpi_device *adev;
> + bool coherent;
> +
> + if (has_acpi_companion(bridge)) {
> + adev = to_acpi_node(bridge->fwnode);
> + if (acpi_check_dma(adev, &coherent))
> + arch_setup_dma_ops(dev, 0, 0, NULL, coherent);
> + } else {
> + struct device *host = bridge->parent;
> + if (!host)
> + return;
> +
> + of_dma_configure(dev, host->of_node);
> + }
> +
> + pci_put_host_bridge_device(bridge);
> +}
> +
> void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> {
> int ret;
> @@ -1557,7 +1588,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> dev->dev.dma_mask = &dev->dma_mask;
> dev->dev.dma_parms = &dev->dma_parms;
> dev->dev.coherent_dma_mask = 0xffffffffull;
> - of_pci_dma_configure(dev);
> + pci_dma_configure(dev);
>
> pci_set_dma_max_seg_size(dev, 65536);
> pci_set_dma_seg_boundary(dev, 0xffffffff);
> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
> index 29fd3fe..ce0e5ab 100644
> --- a/include/linux/of_pci.h
> +++ b/include/linux/of_pci.h
> @@ -16,7 +16,6 @@ int of_pci_get_devfn(struct device_node *np);
> int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
> int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
> int of_get_pci_domain_nr(struct device_node *node);
> -void of_pci_dma_configure(struct pci_dev *pci_dev);
> #else
> static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
> {
> @@ -51,8 +50,6 @@ of_get_pci_domain_nr(struct device_node *node)
> {
> return -1;
> }
> -
> -static inline void of_pci_dma_configure(struct pci_dev *pci_dev) { }
> #endif
>
> #if defined(CONFIG_OF_ADDRESS)
>
next prev parent reply other threads:[~2015-08-24 16:41 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-13 9:58 [PATCH] pci: acpi: Generic function for setting up PCI device DMA coherency Suravee Suthikulpanit
2015-08-13 9:58 ` Suravee Suthikulpanit
2015-08-13 9:58 ` Suravee Suthikulpanit
2015-08-14 1:50 ` Bjorn Helgaas
2015-08-14 1:50 ` Bjorn Helgaas
2015-08-24 17:32 ` Bjorn Helgaas
2015-08-24 17:32 ` Bjorn Helgaas
2015-08-24 19:09 ` Suravee Suthikulpanit
2015-08-24 19:09 ` Suravee Suthikulpanit
2015-08-24 20:14 ` Bjorn Helgaas
2015-08-24 20:14 ` Bjorn Helgaas
2015-08-25 11:11 ` Suthikulpanit, Suravee
2015-08-25 11:11 ` Suthikulpanit, Suravee
2015-08-24 16:41 ` Suravee Suthikulpanit [this message]
2015-08-24 16:41 ` Suravee Suthikulpanit
2015-08-24 16:41 ` Suravee Suthikulpanit
2015-08-24 17:32 ` Bjorn Helgaas
2015-08-24 17:32 ` Bjorn Helgaas
2015-08-24 18:02 ` Suravee Suthikulpanit
2015-08-24 18:02 ` Suravee Suthikulpanit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55DB4939.5070605@amd.com \
--to=suravee.suthikulpanit@amd.com \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=hanjun.guo@linaro.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=m-karicheri2@ti.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.