VT-d faults with Integrated Intel graphics on 4.6

VT-d faults with Integrated Intel graphics on 4.6

[Tamas K Lengyel]

[-- Attachment #1.1: Type: text/plain, Size: 1407 bytes --]

Hi everyone,
I saw some people passingly mention this on the list before but just in
case it has been missed, my serial is also being spammed with the following
printouts with both Xen 4.6 RC1 and the latest staging build:

...
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
33487d7000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
33487d7000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
33487d7000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
33487d7000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
2610742000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
...

The device in question is an integrated Intel graphics card:

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09)

The only way I found to stop the messages from making my serial connection
useless was by assigning the device to xen-pciback.

Cheers,
Tamas

[-- Attachment #1.2: Type: text/html, Size: 1572 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: VT-d faults with Integrated Intel graphics on 4.6

[Chen, Tiejun]

On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> Hi everyone,
> I saw some people passingly mention this on the list before but just in
> case it has been missed, my serial is also being spammed with the following
> printouts with both Xen 4.6 RC1 and the latest staging build:
>
> ...
> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> 33487d7000, iommu reg = ffff82c000201000
> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> 33487d7000, iommu reg = ffff82c000201000
> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> 33487d7000, iommu reg = ffff82c000201000
> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> 33487d7000, iommu reg = ffff82c000201000
> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> 2610742000, iommu reg = ffff82c000201000
> (XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> ...
>

What's your platform? BDW? And how much memory is set to your guest OS?

Just at first glance to fault address, this seems be issued from some 
known erratas on BDS and SKL.

Thanks
Tiejun

> The device in question is an integrated Intel graphics card:
>
> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
> Processor Family Integrated Graphics Controller (rev 09)
>
> The only way I found to stop the messages from making my serial connection
> useless was by assigning the device to xen-pciback.
>
> Cheers,
> Tamas
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
>

Re: VT-d faults with Integrated Intel graphics on 4.6

[Konrad Rzeszutek Wilk]

On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
> On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> >Hi everyone,
> >I saw some people passingly mention this on the list before but just in
> >case it has been missed, my serial is also being spammed with the following
> >printouts with both Xen 4.6 RC1 and the latest staging build:
> >
> >...
> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >33487d7000, iommu reg = ffff82c000201000
> >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >33487d7000, iommu reg = ffff82c000201000
> >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >33487d7000, iommu reg = ffff82c000201000
> >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >33487d7000, iommu reg = ffff82c000201000
> >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >2610742000, iommu reg = ffff82c000201000
> >(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> >...
> >
> 
> What's your platform? BDW? And how much memory is set to your guest OS?

Is see this as well. But oddly enough - only when I use the AMT feature
(normally I just use serial console on the machine).

The platform is             /DQ67SW, BIOS
SWQ6710H.86A.0066.2012.1105.1504 11/05/2012

There is no guest OS - this is initial domain. And I boot with 2GB:
 Released 0 page(s)

Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable

> 
> Just at first glance to fault address, this seems be issued from some 
> known erratas on BDS and SKL.

I am runnig v4.2-rc8.
> 
> Thanks
> Tiejun
> 
> >The device in question is an integrated Intel graphics card:
> >
> >00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
> >Processor Family Integrated Graphics Controller (rev 09)

Same device..
> >
> >The only way I found to stop the messages from making my serial connection
> >useless was by assigning the device to xen-pciback.
> >
> >Cheers,
> >Tamas
> >
> >
> >
> >_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xen.org
> >http://lists.xen.org/xen-devel
> >
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel

Re: VT-d faults with Integrated Intel graphics on 4.6

[Tamas K Lengyel]

[-- Attachment #1.1: Type: text/plain, Size: 2093 bytes --]

On Tue, Aug 25, 2015 at 8:43 AM, Konrad Rzeszutek Wilk <konrad@darnok.org>
wrote:

> On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
> > On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> > >Hi everyone,
> > >I saw some people passingly mention this on the list before but just in
> > >case it has been missed, my serial is also being spammed with the
> following
> > >printouts with both Xen 4.6 RC1 and the latest staging build:
> > >
> > >...
> > >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >33487d7000, iommu reg = ffff82c000201000
> > >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >33487d7000, iommu reg = ffff82c000201000
> > >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >33487d7000, iommu reg = ffff82c000201000
> > >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >33487d7000, iommu reg = ffff82c000201000
> > >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >2610742000, iommu reg = ffff82c000201000
> > >(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> > >...
> > >
> >
> > What's your platform? BDW? And how much memory is set to your guest OS?
>
> Is see this as well. But oddly enough - only when I use the AMT feature
> (normally I just use serial console on the machine).
>
> The platform is             /DQ67SW, BIOS
> SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
>

Same board for mine and same BIOS version. I'm also using the serial
through AMT. This is showing up for dom0 without any guests. Dom0 however
has a max memory set to 4GB. This is my Xen boot param:

dom0_mem=4096M,max:4096M dom0_max_vcpus=4 dom0_vcpus_pin=true hap_1gb=false
hap_2mb=false loglvl=all guest_loglvl=all sync_console console_to_ring
com1=115200,8n1,amt console=com1 intel_iommu=on

Tamas

[-- Attachment #1.2: Type: text/html, Size: 2736 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: VT-d faults with Integrated Intel graphics on 4.6

[Malcolm Crossley]

On 25/08/15 15:43, Konrad Rzeszutek Wilk wrote:
> On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
>> On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
>>> Hi everyone,
>>> I saw some people passingly mention this on the list before but just in
>>> case it has been missed, my serial is also being spammed with the following
>>> printouts with both Xen 4.6 RC1 and the latest staging build:
>>>
>>> ...
>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>> 33487d7000, iommu reg = ffff82c000201000
>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>> 33487d7000, iommu reg = ffff82c000201000
>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>> 33487d7000, iommu reg = ffff82c000201000
>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>> 33487d7000, iommu reg = ffff82c000201000
>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>> 2610742000, iommu reg = ffff82c000201000
>>> (XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
>>> ...
>>>
>>

I think this problem is caused by missing IOMMU mappings for the RMRR regions
if the domain does not have shared EPT enabled. This includes PV Dom 0.

I have posted a patch to fix the issue:

http://lists.xen.org/archives/html/xen-devel/2015-08/msg02090.html



>> What's your platform? BDW? And how much memory is set to your guest OS?
> 
> Is see this as well. But oddly enough - only when I use the AMT feature
> (normally I just use serial console on the machine).
> 
> The platform is             /DQ67SW, BIOS
> SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
> 
> There is no guest OS - this is initial domain. And I boot with 2GB:
>  Released 0 page(s)
> 
> Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
> Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
> Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
> Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
> Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
> Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
> Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
> Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
> Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
> Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
> Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
> Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
> Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
> Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
> Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
> Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
> Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
> Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
> Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
> Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
> Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
> Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
> Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
> Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
> Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
> 
>>
>> Just at first glance to fault address, this seems be issued from some 
>> known erratas on BDS and SKL.
> 
> I am runnig v4.2-rc8.
>>
>> Thanks
>> Tiejun
>>
>>> The device in question is an integrated Intel graphics card:
>>>
>>> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
>>> Processor Family Integrated Graphics Controller (rev 09)
> 
> Same device..

This is a sandy bridge device which doesn't support shared EPT for GPU device.


>>>
>>> The only way I found to stop the messages from making my serial connection
>>> useless was by assigning the device to xen-pciback.

This will cause the GPU to be reset and the reset stopped the GPU accessing the
RMRR region.

>>>
>>> Cheers,
>>> Tamas
>>>
>>>
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xen.org
>>> http://lists.xen.org/xen-devel
>>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xen.org
>> http://lists.xen.org/xen-devel
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
> 

Re: VT-d faults with Integrated Intel graphics on 4.6

[Konrad Rzeszutek Wilk]

On Wed, Aug 26, 2015 at 05:19:39PM +0100, Malcolm Crossley wrote:
> On 25/08/15 15:43, Konrad Rzeszutek Wilk wrote:
> > On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
> >> On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> >>> Hi everyone,
> >>> I saw some people passingly mention this on the list before but just in
> >>> case it has been missed, my serial is also being spammed with the following
> >>> printouts with both Xen 4.6 RC1 and the latest staging build:
> >>>
> >>> ...
> >>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>> 33487d7000, iommu reg = ffff82c000201000
> >>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>> 33487d7000, iommu reg = ffff82c000201000
> >>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>> 33487d7000, iommu reg = ffff82c000201000
> >>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>> 33487d7000, iommu reg = ffff82c000201000
> >>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>> 2610742000, iommu reg = ffff82c000201000
> >>> (XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> >>> ...
> >>>
> >>
> 
> I think this problem is caused by missing IOMMU mappings for the RMRR regions
> if the domain does not have shared EPT enabled. This includes PV Dom 0.
> 
> I have posted a patch to fix the issue:
> 
> http://lists.xen.org/archives/html/xen-devel/2015-08/msg02090.html

No dice. Still seeing the same problem :-(

> 
> 
> 
> >> What's your platform? BDW? And how much memory is set to your guest OS?
> > 
> > Is see this as well. But oddly enough - only when I use the AMT feature
> > (normally I just use serial console on the machine).
> > 
> > The platform is             /DQ67SW, BIOS
> > SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
> > 
> > There is no guest OS - this is initial domain. And I boot with 2GB:
> >  Released 0 page(s)
> > 
> > Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
> > Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
> > Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
> > Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
> > Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
> > Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
> > Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
> > Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
> > Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
> > Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
> > Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
> > Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
> > Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
> > Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
> > Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
> > Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
> > Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
> > Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
> > Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
> > Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
> > Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
> > Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
> > Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> > Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
> > Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
> > Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> > Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> > Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
> > 
> >>
> >> Just at first glance to fault address, this seems be issued from some 
> >> known erratas on BDS and SKL.
> > 
> > I am runnig v4.2-rc8.
> >>
> >> Thanks
> >> Tiejun
> >>
> >>> The device in question is an integrated Intel graphics card:
> >>>
> >>> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
> >>> Processor Family Integrated Graphics Controller (rev 09)
> > 
> > Same device..
> 
> This is a sandy bridge device which doesn't support shared EPT for GPU device.
> 
> 
> >>>
> >>> The only way I found to stop the messages from making my serial connection
> >>> useless was by assigning the device to xen-pciback.
> 
> This will cause the GPU to be reset and the reset stopped the GPU accessing the
> RMRR region.
> 
> >>>
> >>> Cheers,
> >>> Tamas
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Xen-devel mailing list
> >>> Xen-devel@lists.xen.org
> >>> http://lists.xen.org/xen-devel
> >>>
> >>
> >> _______________________________________________
> >> Xen-devel mailing list
> >> Xen-devel@lists.xen.org
> >> http://lists.xen.org/xen-devel
> > 
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xen.org
> > http://lists.xen.org/xen-devel
> > 
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel

Re: VT-d faults with Integrated Intel graphics on 4.6

[Andrew Cooper]

On 26/08/15 18:15, Konrad Rzeszutek Wilk wrote:
> On Wed, Aug 26, 2015 at 05:19:39PM +0100, Malcolm Crossley wrote:
>> On 25/08/15 15:43, Konrad Rzeszutek Wilk wrote:
>>> On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
>>>> On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
>>>>> Hi everyone,
>>>>> I saw some people passingly mention this on the list before but just in
>>>>> case it has been missed, my serial is also being spammed with the following
>>>>> printouts with both Xen 4.6 RC1 and the latest staging build:
>>>>>
>>>>> ...
>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>> 33487d7000, iommu reg = ffff82c000201000
>>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>> 33487d7000, iommu reg = ffff82c000201000
>>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>> 33487d7000, iommu reg = ffff82c000201000
>>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>> 33487d7000, iommu reg = ffff82c000201000
>>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>> 2610742000, iommu reg = ffff82c000201000
>>>>> (XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
>>>>> ...
>>>>>
>> I think this problem is caused by missing IOMMU mappings for the RMRR regions
>> if the domain does not have shared EPT enabled. This includes PV Dom 0.
>>
>> I have posted a patch to fix the issue:
>>
>> http://lists.xen.org/archives/html/xen-devel/2015-08/msg02090.html
> No dice. Still seeing the same problem :-(

Does your BIOS provide suitable extra RMRR regions when AMT is in use? 
IIRC, AMT uses the on-chip GPU as part of its VNC handling.

~Andrew

Re: VT-d faults with Integrated Intel graphics on 4.6

[Konrad Rzeszutek Wilk]

On Wed, Aug 26, 2015 at 06:20:34PM +0100, Andrew Cooper wrote:
> On 26/08/15 18:15, Konrad Rzeszutek Wilk wrote:
> > On Wed, Aug 26, 2015 at 05:19:39PM +0100, Malcolm Crossley wrote:
> >> On 25/08/15 15:43, Konrad Rzeszutek Wilk wrote:
> >>> On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
> >>>> On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> >>>>> Hi everyone,
> >>>>> I saw some people passingly mention this on the list before but just in
> >>>>> case it has been missed, my serial is also being spammed with the following
> >>>>> printouts with both Xen 4.6 RC1 and the latest staging build:
> >>>>>
> >>>>> ...
> >>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>> 33487d7000, iommu reg = ffff82c000201000
> >>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>> 33487d7000, iommu reg = ffff82c000201000
> >>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>> 33487d7000, iommu reg = ffff82c000201000
> >>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>> 33487d7000, iommu reg = ffff82c000201000
> >>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>> 2610742000, iommu reg = ffff82c000201000
> >>>>> (XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> >>>>> ...
> >>>>>
> >> I think this problem is caused by missing IOMMU mappings for the RMRR regions
> >> if the domain does not have shared EPT enabled. This includes PV Dom 0.
> >>
> >> I have posted a patch to fix the issue:
> >>
> >> http://lists.xen.org/archives/html/xen-devel/2015-08/msg02090.html
> > No dice. Still seeing the same problem :-(
> 
> Does your BIOS provide suitable extra RMRR regions when AMT is in use? 
> IIRC, AMT uses the on-chip GPU as part of its VNC handling.

It looks to be (see inline serial log). Ignore the dump_stack in the Linux kernel - that
is some code I added.


Trying 192.168.102.15...
Connected to maxsrv2.
Escape character is '^]'.
 Xen 4.6.0-rc
(XEN) Xen version 4.6.0-rc (konrad@(none)) (gcc (GCC) 4.4.4 20100503 (Red Hat 4.4.4-2)) debug=y Wed Aug 26 14:24:N) Console output is synchronous.
(XEN) Bootloader: unknown
(XEN) Command line: iommu=verbose,debug dom0pvh=0 ucode=scan vpmu= transfer time: 1 seconds
(XEN) Disc information:
(XEN)  Found 0 MBR signatures
(XEN)  Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009a800 (usable)
(XEN)  000000000009a800 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 0000000020000000 (usable)
(XEN)  0000000020000000 - 0000000020200000 (reserved)
(XEN)  0000000020200000 - 0000000040000000 (usable)
(XEN)  0000000040000000 - 0000000040200000 (reserved)
(XEN)  0000000040200000 - 000000009e856000 (usable)
(XEN)  000000009e856000 - 000000009e85f000 (ACPI data)
(XEN)  000000009e85f000 - 000000009e8aa000 (ACPI NVS)
(XEN)  000000009e8aa000 - 000000009e8b2000 (usable)
(XEN)  000000009e8b2000 - 000000009e9a5000 (reserved)
(XEN)  000000009e9a5000 - 000000009e9a7000 (usable)
(XEN)  000000009e9a7000 - 000000009ebc6000 (reserved)
(XEN)  000000009ebc6000 - 000000009ebc7000 (usable)
(XEN)  000000009ebc7000 - 000000009ebd7000 (reserved)
(XEN)  000000009ebd7000 - 000000009ebf5000 (ACPI NVS)
(XEN)  000000009ebf5000 - 000000009ec19000 (reserved)
(XEN)  000000009ec19000 - 000000009ec5c000 (ACPI NVS)
(XEN)  000000009ec5c000 - 000000009ee7c000 (reserved)
(XEN)  000000009ee7c000 - 000000009f000000 (usable)
(XEN)  000000009f800000 - 00000000bfa00000 (reserved)
(XEN)  00000000fed1c000 - 00000000fed40000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 000000043e600000 (usable)
(XEN) ACPI: RSDP 000F0450, 0024 (r2  INTEL)
(XEN) ACPI: XSDT 9E856070, 0064 (r1 INTEL  DQ67SW    1072009 AMI     10013)
(XEN) ACPI: FACP 9E85DBC0, 00F4 (r4 INTEL  DQ67SW    1072009 AMI     10013)
(XEN) ACPI: DSDT 9E856168, 7A54 (r2 INTEL  DQ67SW         16 INTL 20051117)
(XEN) ACPI: FACS 9EBDBF80, 0040
(XEN) ACPI: APIC 9E85DCB8, 0072 (r3 INTEL  DQ67SW    1072009 AMI     10013)
(XEN) ACPI: TCPA 9E85DD30, 0032 (r2 INTEL  DQ67SW          1 MSFT  1000013)
(XEN) ACPI: SSDT 9E85DD68, 0102 (r1 INTEL  DQ67SW          1 MSFT  3000001)
(XEN) ACPI: MCFG 9E85DE70, 003C (r1 INTEL  DQ67SW    1072009 MSFT       97)
(XEN) ACPI: HPET 9E85DEB0, 0038 (r1 INTEL  DQ67SW    1072009 AMI.        4)
(XEN) ACPI: ASF! 9E85DEE8, 00A0 (r32 INTEL  DQ67SW          1 TFSM    F4240)
(XEN) ACPI: DMAR 9E85DF88, 00E8 (r1 INTEL  DQ67SW          1 INTL        1)
(XEN) System RAM: 15819MB (16199164kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000043e600000
(XEN) Domain heap initialised
(XEN) Allocated console ring of 1048576 KiB.
(XEN) found SMP MP-table at 000fda50
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 9ebdbf80/0000000000000000, using 32
(XEN) ACPI:             wakeup_vec[9ebdbf8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 6:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:809: Host address width 36
(XEN) [VT-D]dmar.c:823: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:485:   dmaru->address = fed90000
(XEN) [VT-D]iommu.c:1149: drhd->address = fed90000 iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:1151: cap = c0000020e60262 ecap = f0101a
(XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:823: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:485:   dmaru->address = fed91000
(XEN) [VT-D]iommu.c:1149: drhd->address = fed91000 iommu->reg = ffff82c000203000
(XEN) [VT-D]iommu.c:1151: cap = c9008020660262 ecap = f0105a
(XEN) [VT-D]dmar.c:410:  IOAPIC: 0000:f0:1f.0
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.0
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.1
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.2
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.3
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.4
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.5
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.6
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.7
(XEN) [VT-D]dmar.c:499:   flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:828: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:1d.0
(XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:1a.0
(XEN) [VT-D]dmar.c:694:   RMRR region: base_addr 9ebad000 end_address 9ebbbfff
(XEN) [VT-D]dmar.c:828: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:694:   RMRR region: base_addr 9f800000 end_address bf9fffff

There ^^^^ That is the device.

(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) NR_CPUS:384 nr_cpumask_bits:64
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) mce_intel.c:735ng enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3292.587 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802eb830 -> ffff82d0802eca84
(XE buses 00 - 3f
(XEN) PCI: Not using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN)  - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI witn2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) microcode: CPU0 updated from revision 0x28 to 0x29, date = 2013-06-12 
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2a
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN)  - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) microcode: CPU1 updated from revision 0x28 to 0x29, date = 2013-06-12 
(XEN) microcode: CPU2 updated from revision 0x28 to 0x29, date = 2013-06-12 
(XEN) Brought up 4 CPUs
(XEN) microcode: CPU3 updated from revision 0x28 to 0x29, date = 2013-06-12 
(XEN) tmem: initialized comp=1 dedup=1 tze=0
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 216 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0xa54000
(XEN) elf_parse_binary: phdr: paddr=0x1c00000 memsz=0x100000
(XEN_parse_binary: memory: 0x1000000 -> 0x2036000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81d181f0
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb|writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: SUPPORTED_FEATURES = 0x90d
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: MOD_START_PFN = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0x0
(XEN)     virt_offset      = 0xffffffff80000000
(XEN)     virt_kstart      = 0xffffffff81000000
(XEN)     virt_kend        = 0xffffffff82036000
(XEN)     virt_entry       = 0xffffffff81d181f0
(XEN)     p2m_base         = 0xffffffffffffffff
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2036000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000428000000->000000042c000000 (484566 pages to be allocated)
(XEN)  Init. ramdisk: 0000000438ad6000->000000043e5ff7dc
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff82036000
(XEN)  Init. ramdisk: 0000000000000000->0000000000000000
(XEN)  Phys-Mach map: ffffffff82036000->ffffffff82436000
(XEN)  Start info:    ffffffff82436000->ffffffff824364b4
(XEN)  Page tables:   ffffffff82437000->ffffffff8244e000
(XEN)  Boot stack:    ffffffff8244e000->ffffffff8244f000
(XEN)  TOTAL:         ffffffff80000000->ffffffff82800000
(XEN)  ENTRY ADDRESS: ffffffff81d181f0
(XEN) Dom0 has maximum 1 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81a54000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81c00000 -> 0xffffffff81d00000
(XEN) elf_load_binary: phdr 2 at 0xffffffff81d00000 -> 0xffffffff81d17598
(XEN) elf_load_binary: phdr 3 at 0xffffffff81d18000 -> 0xffffffff81ed3000
(XEN) [VT-D]iommu.c:1433: d0:Hostbridge: skip 0000:00:00.0 map
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) [VT-D]iommu [VT-D]iommu.c:1459: d0:PCI: map 0000:00:16.0
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:00:16.2
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:00:16.3
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:00:19.0
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:00:1a.0
(XEN) [VT-D]iommu.c:1447: d0:PCIe: map 0000:00:1b.0
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:00:1d.0
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:00:1f.0
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:00:1f.2
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:00:1f.3
(XEN) [VT-D]iommu.c:1447: d0:PCIe: map 0000:04:00.0
(XEN) [VT-D]iommu.c:1447: d0:PCIe: map 0000:05:00.0
(XEN) [VT-D]iommu.c:1447: d0:PCIe: map 0000:06:00.0
(XEN) [VT-D]iommu.c:1447: d0:PCIe: map 0000:07:00.0
(XEN) [VT-D]iommu.c:1459: d0:PCI: map 0000:08:03.0
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:729: iommu_enable_translat(XEN) ..................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1... 
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 300kB init memory.
mapping ker physical memory
about to get started...
(XEN) traps.c:2685:d0v0 Domain attempted WRMSR 00000000c0000081 from 0xe023e00800000000 to 0x0023001000000000.
(XEN) traps.c:2685:d0v0 Domain attempted WRMSR 00000000c0000082 from 0xffff82d0bffff000 to 0xffffffff81749810.
(XEN) traps.c:2685:d0v0 Domain attempted WRMSR 00000000c0000083 from 0xffff82d0bffff020 to 0xffffffff8174bd30.
(XEN) traps.c:2685:d0v0 Domain attempted WRMSR 0000000000000174 from 0x000000000000e008 to 0x0000000000000010.
(XEN) traps.c:2685:d0v0 Domain attempted WRMSR 0000000000000175 from 0xffff83009e6f7fc0 to 0x0000000000000000.
(XEN) traps.c:2685:d0v0 Domain attempted WRMSR 0000000000000176 from 0xffff82d080239870 to 0xffffffff8174bb30.
(XEN) traps.c:2685:d0v0 Domain attempted WRMSR 00000000c0000084 from 0x0000000000074700 to 0x0000000000047700.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WC  WP  UC  UC  
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-rc8upstream-00008-g88c6774 (konrad@build-external.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Wed Aug 26 14:24:41 EDT 2015
[    0.000000] Command line: debug console=hvc0 xen-blkback.log_stats=1 kgdboc=hvc0 xen-pciback.hide=(00:1a.0)(00:1d.0)
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] Released 0 page(s)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
[    0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
[    0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
[    0.000000] Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
[    0.000000] Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
[    0.000000] Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
[    0.000000] Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
[    0.000000] Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
[    0.000000] Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
[    0.000000] Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
[    0.000000] Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
[    0.000000] Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
[    0.000000] Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
[    0.000000] Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
[    0.000000] Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
[    0.000000] Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
[    0.000000] Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
[    0.000000] Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
[    0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[    0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI:                  /DQ67SW, BIOS SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
[    0.000000] Hypervisor detected: Xen
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x80466 max_arch_pfn = 0x400000000
[    0.000000] MTRR: Disabled
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
[    0.000000]  [mem 0x7fe00000-0x7fffffff] page 4k
[    0.000000] BRK [0x02010000, 0x02010fff] PGTABLE
[    0.000000] BRK [0x02011000, 0x02011fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x7fdfffff]
[    0.000000]  [mem 0x60000000-0x7fdfffff] page 4k
[    0.000000] BRK [0x02012000, 0x02012fff] PGTABLE
[    0.000000] BRK [0x02013000, 0x02013fff] PGTABLE
[    0.000000] BRK [0x02014000, 0x02014fff] PGTABLE
[    0.000000] BRK [0x02015000, 0x02015fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x1fffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x40200000-0x5fffffff]
[    0.000000]  [mem 0x40200000-0x5fffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x80000000-0x80465fff]
[    0.000000]  [mem 0x80000000-0x80465fff] page 4k
[    0.000000] RAMDISK: [mem 0x04000000-0x09b29fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
[    0.000000] ACPI: XSDT 0x000000009E856070 000064 (v01 INTEL  DQ67SW   01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000009E85DBC0 0000F4 (v04 INTEL  DQ67SW   01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000009E856168 007A54 (v02 INTEL  DQ67SW   00000016 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000009EBDBF80 000040
[    0.000000] ACPI: APIC 0x000000009E85DCB8 000072 (v03 INTEL  DQ67SW   01072009 AMI  00010013)
[    0.000000] ACPI: TCPA 0x000000009E85DD30 000032 (v02 INTEL  DQ67SW   00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x000000009E85DD68 000102 (v01 INTEL  DQ67SW   00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x000000009E85DE70 00003C (v01 INTEL  DQ67SW   01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000009E85DEB0 000038 (v01 INTEL  DQ67SW   01072009 AMI. 00000004)
[    0.000000] ACPI: ASF! 0x000000009E85DEE8 0000A0 (v32 INTEL  DQ67SW   00000001 TFSM 000F4240)
[    0.000000] ACPI: RMAD 0x000000009E85DF88 0000E8 (v01 INTEL  DQ67SW   00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Setting APIC routing to Xen PV.
[    0.000000] NUMA turned off
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000080465fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7fc13000-0x7fc16fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000080465fff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000099fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x0000000080465fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000080465fff]
[    0.000000] On node 0 totalpages: 524287
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 153 pages reserved
[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7128 pages used for memmap
[    0.000000]   DMA32 zone: 520294 pages, LIFO batch:31
[    0.000000] p2m virtual area at ffffc90000000000, size is 600000
[    0.000000] Remapped 1126 page(s)
[    0.000000] Reserving Intel graphics stolen memory at 0x9fa00000-0xbf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] e820: [mem 0xbfa00000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.6.0-rc (preserve-AD)
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff880080200000 s95640 r8192 d31336 u524288
[    0.000000] pcpu-alloc: s95640 r8192 d31336 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] xen: PV spinlocks enabled
[    0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516950
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: debug console=hvc0 xen-blkback.log_stats=1 kgdboc=hvc0 xen-pciback.hide=(00:1a.0)(00:1d.0)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] software IO TLB [mem 0x79200000-0x7d200000] (64MB) mapped at [ffff880079200000-ffff88007d1fffff]
[    0.000000] Memory: 1881168K/2097148K available (7482K kernel code, 1016K rwdata, 2384K rodata, 1836K init, 1264K bss, 215980K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] NR_IRQS:33024 nr_irqs:256 16
[    0.000000] xen:events: Using FIFO-based ABI
[    0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[    0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[    0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[    0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[    0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[    0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[    0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[    0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[    0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[    0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[    0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[    0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[    0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[    0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[    0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [hvc0] enabled
[    0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.00000 Xen timer for CPU 0
[    0.000000] tsc: Detected 3292.586 MHz processor
[   12.247780] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.17 BogoMIPS (lpj=3292586)
[   12.259002] pid_max: default: 32768 minimum: 301
[   12.263983] ACPI: Core revision 20150619
[   12.378341] ACPI: All ACPI Tables successfully acquired
[   12.384432] Security Framework initialized
[   12.388767] SELinux:  Initializing.
[   12.392540] SELinux:  Starting in permissive mode
[   12.398473] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   12.406842] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   12.414611] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[   12.421755] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[   12.430680] Initializing cgroup subsys freezer
[   12.435526] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[   12.441878] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[   12.449413] CPU: Physical Processor ID: 0
[   12.453733] CPU: Processor Core ID: 0
[   12.457690] mce: CPU supports 2 MCE banks
[   12.462045] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[   12.467912] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[   12.522257] Freeing SMP alternatives memory: 28K (ffffffff81ecb000 - ffffffff81ed2000)
[   12.543327] cpu 0 spinlock event irq 25
[   12.547599] Performance Events: 16-deep LBR, SandyBridge events, (XEN) traps.c:2 from 0x0000000000000000 to 0x00000000000001ff.
(XEN) traps.c:2685:d0v0 Domain attempted WRMSR 00000000000003f6 from 0x000000000000ffff to 0x000000000000fe00.
Broken PMU hardware detected, using software events only.
[   12.600799] Failed to access perfctr msr (MSR c8 is 0)
[   12.607256] x86: Booted up 1 node, 1 CPUs
[   12.611719] NMI watchdog: disabled (cpu0): hardware events not enabled
[   12.618646] NMI watchdog: Shutting down hard lockup detector on all cpus
[   12.626105] devtmpfs: initialized
[   12.640142] PM: Registering ACPI NVS region [mem 0x9e85f000-0x9e8a9fff] (307200 bytes)
[   12.648767] PM: Registering ACPI NVS region [mem 0x9ebd7000-0x9ebf4fff] (122880 bytes)
[   12.657258] PM: Registering ACPI NVS region [mem 0x9ec19000-0x9ec5bfff] (274432 bytes)
[   12.666486] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[   12.677137] kworker/u2:0 (16) used greatest stack depth: 13992 bytes left
[   12.684726] RTC time: 17:25:12, date: 08/26/15
[   12.690243] NET: Registered protocol family 16
[   12.695040] xen:grant_table: Grant tables using version 1 layout
[   12.701427] Grant table initialized
(XEN) traps.c:3290: GPF (0000): ffff82d080194015 -> ffff82d08023dacd
[   12.714011] ACPI: bus type PCI registered
[   12.718289] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[   12.726981] dca service started, version 1.12.1
[   12.731894] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[   12.741764] PCI: not using MMCONFIG
[   12.745520] PCI: Using configuration type 1 for base access
[   12.779157] kworker/u2:1 (65) used greatest stack depth: 13552 bytes left
[   12.817342] ACPI: Added _OSI(Module Device)
[   12.821850] ACPI: Added _OSI(Processor Device)
[   12.826569] ACPI: Added _OSI(3.0 _SCP Extensions)
[   12.831620] ACPI: Added _OSI(Processor Aggregator Device)
[   12.840279] xen: registering gsi 9 triggering 0 polarity 0
[   12.852676] ACPI: Executed 1 blocks of module-level executable AML code
[   12.938088] ACPI: Dynamic OEM Table Load:
[   12.942307] ACPI: SSDT 0xFFFF88007892E400 000084 (v01 AMI    CST      00000001 MSFT 03000001)
[   12.956518] ACPI: Interpreter enabled
[   12.960424] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (980111] ACPI: (supports S0 S3 S4 S5)
[   12.984286] ACPI: Using IOAPIC for interrupt routing
[   12.989856] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[   13.001338] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[   13.022507] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[   13.036589] [FirmwaSI(Linux) query ignored
[   13.172950] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[   13.179528] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[   13.195410] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[   13.207420] acpi PNP0A08:00: [Fi[   13.221055] PCI host bridge to bus 0000:00
[   13.225405] pci_bus 0000:00: root bus resource [bus 00-ff]
[   13.231276] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[   13.238542] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[   13.245802] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[   13.253063] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[   13.260325] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[   13.268315] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[   13.276318] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[   13.284348] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) PCI add device 0000:00:00.0
[   13.299778] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[   13.306342] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[   13.313768] pci 0000:00:01.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:01.0
[   13.323772] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[   13.330203] pci 0000:00:02.0: reg 0x10: [mem 0xfb000000-0xfb3fffff 64bit]
[   13.337427] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[   13.345134] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
(XEN) PCI add device 0000:00:02.0
[   13.355993] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[   13.362438] pci 0000:00:16.0: reg 0x10: [mem 0xfbe2a000-0xfbe2a00f 64bit]
[   13.369845] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:00:16.0
[   13.380989] pci 0000:00:16.2: [8086:1c3c] type 00 class 0x010185
[   13.387415] pci 0000:00:16.2: reg 0x10: [io  0xf130-0xf137]
[   13.393344] pci 0000:00:16.2: reg 0x14: [io  0xf120-0xf123]
[   13.399312] pci 0000:00:16.2: reg 0x18: [io  0xf110-0xf117]
[   13.405276] pci 0000:00:16.2: reg 0x1c: [io  0xf100-0xf103]
[   13.411248] pci 0000:00:16.2: reg 0x20: [io  0xf0f0-0xf0ff]
(XEN) PCI add device 0000:00:16.2
[   13.421851] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[   13.428294] pci 0000:00:16.3: reg 0x10: [io  0xf0e0-0xf0e7]
[   13.434211] pci 0000:00:16.3: reg 0x14: [mem 0xfbe29000-0xfbe29fff]
(XEN) PCI add device 0000:00:16.3
[   13.445673] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[   13.452134] pci 0000:00:19.0: reg 0x10: [mem 0xfbe00000-0xfbe1ffff]
[   13.458784] pci 0000:00:19.0: reg 0x14: [mem 0xfbe28000-0xfbe28fff]
[   13.465499] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[   13.471663] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[   13.479099] pci 0000:00:19.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:19.0
[   13.489059] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[   13.495517] pci 0000:00:1a.0: reg 0x10: [mem 0xfbe27000-0xfbe273ff]
[   13.502389] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[   13.509826] pci 0000:00:1a.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:1a.0
[   13.519818] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[   13.526261] pci 0000:00:1b.0: reg 0x10: [mem 0xfbe20000-0xfbe23fff 64bit]
[   13.533695] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:00:1b.0
[   13.544833] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[   13.551480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[   13.558023] pci 0000:00:1c.0: Enabling MPC IRBNCE
[   13.563005] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[   13.571107] pci 0000:00:1c.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:1c.0
[   13.581100] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[   13.587729] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[   13.594268] pci 0000:00:1c.4: Enabling MPC IRBNCE
[   13.599235] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[   13.607346] pci 0000:00:1c.4: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:1c.4
[   13.617307] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[   13.623938] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[   13.630454] pci 0000:00:1c.6: Enabling MPC IRBNCE
[   13.635411] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
[   13.643525] pci 0000:00:1c.6: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:1c.6
[   13.653484] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[   13.659945] pci 0000:00:1d.0: reg 0x10: [mem 0xfbe26000-0xfbe263ff]
[   13.666833] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[   13.674271] pci 0000:00:1d.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:1d.0
[   13.684264] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[   13.691785] pci 0000:00:1e.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:1e.0
[   13.701763] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
(XEN) PCI add device 0000:00:1f.0
[   13.713157] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[   13.719618] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[   13.725548] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[   13.731521] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[   13.737509] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[   13.743475] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[   13.749441] pci 0000:00:1f.2: reg 0x24: [mem 0xfbe25000-0xfbe257ff]
[   13.756253] pci 0000:00:1f.2: PME# supported from D3hot
(XEN) PCI add device 0000:00:1f.2
[   13.766641] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[   13.773055] pci 0000:00:1f.3: reg 0x10: [mem 0xfbe24000-0xfbe240ff 64bit]
[   13.780315] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
(XEN) PCI add device 0000:00:1f.3
[   13.791445] pci 0000:00:01.0: PCI bridge to [bus 01]
[   13.797254] pci 0000:02:00.0: [10b5:8613] type 01 class 0x060400
[   13.803729] pci 0000:02:00.0: reg 0x10: [mem 0xfbb00000-0xfbb1ffff]
[   13.810650] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:02:00.0
[   13.821278] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[   13.826832] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[   13.833338] pci 0000:00:1c.0:   bridge window [mem 0xfb900000-0xfbbfffff]
[   13.841184] pci 0000:03:01.0: [10b5:8613] type 01 class 0x060400
[   13.847932] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:03:01.0
[   13.858625] pci 0000:03:02.0: [10b5:8613] type 01 class 0x060400
[   13.865361] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:03:02.0
[   13.876090] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[   13.881648] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[   13.888162] pci 0000:02:00.0:   bridge window [mem 0xfb900000-0xfbafffff]
[   13.896025] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[   13.902553] pci 0000:04:00.0: reg 0x10: [mem 0xfba00000-0xfba01fff 64bit]
[   13.910104] pci 0000:04:00.0: PME# supported from D0 D3hot
(XEN) PCI add device 0000:04:00.0
[   13.920308] pci 0000:03:01.0: PCI bridge to [bus 04]
[   13.925580] pci 0000:03:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
[   13.933434] pci 0000:05:00.0: [1b4b:9123] type 00 class 0x010601
[   13.939873] pci 0000:05:00.0: reg 0x10: [io  0xe040-0xe047]
[   13.945810] pci 0000:05:00.0: reg 0x14: [io  0xe030-0xe033]
[   13.951791] pci 0000:05:00.0: reg 0x18: [io  0xe020-0xe027]
[   13.957774] pci 0000:05:00.0: reg 0x1c: [io  0xe010-0xe013]
[   13.963747] pci 0000:05:00.0: reg 0x20: [io  0xe000-0xe00f]
[   13.969704] pci 0000:05:00.0: reg 0x24: [mem 0xfb910000-0xfb9107ff]
[   13.976396] pci 0000:05:00.0: reg 0x30: [mem 0xfb900000-0xfb90ffff pref]
[   13.983717] pci 0000:05:00.0: PME# supported from D3hot
(XEN) PCI add device 0000:05:00.0
[   13.993558] pci 0000:03:02.0: PCI bridge to [bus 05]
[   13.998824] pci 0000:03:02.0:   bridge window [io  0xe000-0xefff]
[   14.005329] pci 0000:03:02.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[   14.013208] pci 0000:06:00.0: [1415:c138] type 00 class 0x070002
[   14.019640] pci 0000:06:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[   14.027487] pci 0000:06:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[   14.035386] pci 0000:06:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[   14.043517] pci 0000:06:00.0: supports D1 D2
[   14.048054] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
(XEN) PCI add device 0000:06:00.0
[   14.069045] kworker/u2:1 (327) used greatest stack depth: 13392 bytes left
[   14.086203] pci 0000:00:1c.4: PCI bridge to [pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[   14.105856] pci 0000:07:00.0: reg 0x10: [mem 0xfbd00000-0xfbd01fff 64bit]
[   14.113393] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:07:00.0
[   14.124071] pci 0000:00:1c.6: PCI bridge to [bus 07]
[   14.129348] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[   14.137083] pci 0000:08:03.0: [11c1:5811] type 00 class 0x0c0010
[   14.143504] pci 0000:08:03.0: reg 0x10: [mem 0xfbc00000-0xfbc00fff]
[   14.150408] pci 0000:08:03.0: supports D1 D2
[   14.154935] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot
(XEN) PCI add device 0000:08:03.0
[   14.165515] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[   14.172715] pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[   14.179994] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[   14.189067] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[   14.198155] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[   14.207264] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[   14.216367] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[   14.226219] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[   14.236031] pci 0000:00:1e.0:   bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[   14.250674] xen: registering gsi 13 triggering 1 polarity 0
[   14.263679] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   14.272077] ACPI: PCI Interrupt Link [LNKB]ink [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   14.305376] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[   14.313954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[   14.322333] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   14.330452] ACPI: Enabled 3 GPEs in block 00 to 3F
[   14.335800] xen:balloon: Initialising balloon driver
[   14.343110] xen_balloon: Initialising balloon driver
[   14.350289] vgaarb: setting as boot device: PCI:0000:00:02.0
[   14.356265] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[   14.364925] vgaarb: loaded
[   14.367860] vgaarb: bridge control possible 0000:00:02.0
[   14.374709] SCSI subsystem initialized
[   14.379097] ACPI: bus type USB registered
[   14.383661] usbcore: registered new interface driver usbfs
[   14.389642] usbcore: registered new interface driver hub
[   14.395363] usbcore: registered new device driver usb
[   14.401023] pps_core: LinuxPPS API ver. 1 registered
[   14.406303] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   14.416079] PTP clock support registered
[   14.420499] PCI: Using ACPI for IRQ routing
[   14.431408] PCI: pci_cache_line_size set to 64 bytes
[   14.436867] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
[   14.443237] e820: reserve RAM buffer [mem 0x80466000-0x83ffffff]
[   14.451211] NetLabel: Initializing
[   14.454820] NetLabel:  domain hash size = 128
[   14.459495] NetLabel:  protocols = UNLABELED CIPSOv4
[   14.464938] NetLabel:  unlabeled traffic allowed by default
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
[   14.479273] clocksource: Switched to clocksource xen
[   14.541536] pnp: PnP ACPI init
[   14.546740] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[   14.553782]  has been reserved
[   14.582399] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[   14.592137] system 00:01: [io  0x0290-0x029f] has been reserved
[   14.598406] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[   14.609031] xen: registering gsi 8 triggering 1 polarity 0
[   14.615192] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[   14.622874] system 00:03: [io  0x04d0-0x04d1] has been reserved
[   14.629156] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[   14.639311] xen: registering gsi 4 triggering 1 polarity 0
[   14.645148] pnp 00:04: [dma 0 disabled]
[   14.649844] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[   14.658340] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[   14.669690] system 00:06: [io  0x0400-0x0453] could not be reserved
[   14.676340] system 00:06: [io  0x0458-0x047f] has be been reserved
[   14.702447] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
[   14.709887] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[   14.716972] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[   14.724036] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[   14.732414] system 00:07: [io  0x0454-0x0457] has been reserved
[   14.738676] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[   14.750179] pnp: PnP ACPI: found 8 devices
[   14.754841] pciback 0000:00:1a.0: seizing device
[   14.759883] pciback 000[   14.808450] PM-Timer failed consistency check  (0xffffff) - aborting.
[   14.815481] pci 0000:00:01.0: PCI bridge to [bus 01]
[   14.820767] pci 0000:03:01.0: PCI bridge to [bus 04]
[   14.826090] pci 0000:03:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
[   14.833374] pci 0000:03:02.0: PCI bridge to [bus 05]
[   14.838673] pci 0000:03:02.0:   bridge window [io  0xe000-0xefff]
[   14.845216] pci 0000:03:02.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[   14.852487] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[   14.858079] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[   14.864580] pci 0000:02:00.0:   bridge window [mem 0xfb900000-0xfbafffff]
[   14.871859] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[   14.877430] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[   14.883934] pci 0000:00:1c.0:   bridge window [mem 0xfb900000-0xfbbfffff]
[   14.891206] pci 0000:00:1c.4: PCI bridge to [bus 06]
[   14.896520] pci 0000:00:1c.4:   bridge window [mem 0xfb400000-0xfb8fffff]
[   14.903807] pci 0000:00:1c.6: PCI bridge to [bus 07]
[   14.909110] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[   14.916386] pci 0000:00:1e.0: PCI bridge to [bus 08]
[   14.921703] pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[   14.928980] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[   14.935570] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[   14.942182] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[   14.948784] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[   14.955407] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[   14.962770] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[   14.970123] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[   14.977561] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[   14.983546] pci_bus 0000:02: resource 1 [mem 0xfb900000-0xfbbfffff]
[   14.990237] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[   14.996213] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfbafffff]
[   15.002921] pci_bus 0000:04: resource 1 [mem 0xfba00000-0xfbafffff]
[   15.009614] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[   15.015590] pci_bus 0000:05: resource 1 [mem 0xfb900000-0xfb9fffff]
[   15.022299] pci_bus 0000:06: resource 1 [mem 0xfb400000-0xfb8fffff]
[   15.029017] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
[   15.035735] pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff]
[   15.042459] pci_bus 0000:08: resource 4 [io  0x0000-0x03af window]
[   15.049080] pci_bus 0000:08: resource 5 [io  0x03e0-0x0cf7 window]
[   15.055696] pci_bus 0000:08: resource 6 [io  0x03b0-0x03df window]
[   15.062305] pci_bus 0000:08: resource 7 [io  0x0d00-0xffff window]
[   15.068926] pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
[   15.076288] pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
[   15.083633] pci_bus 0000:08: resource 10 [mem 0xbfa00000-0xffffffff window]
[   15.091279] NET: Registered protocol family 2
[   15.096712] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   15.104488] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[   15.111537] TCP: Hash tables configured (established 16384 bind 16384)
[   15.118548] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[   15.124945] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[   15.132110] NET: Registered protocol family 1
[   15.137779] RPC: Registered named UNIX socket transport module.
[   15.144068] RPC: Registered udp transport module.
[   15.149107] RPC: Registered tcp transport module.
[   15.154137] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.161816] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[   15.170965] pci 0000:00:02.0: Video device with shadowed ROM
[   15.178123] xen: registering gsi 16 triggering 0 polarity 1
[   15.184064] xen: --> pirq=16 -> irq=16 (gsi=16)
[   15.364228] xen: registering gsi 23 triggering 0 polarity 1
[   15.370171] xen: --> pirq=23 -> irq=23 (gsi=23)
[   15.551312] xen: registering gsi 17 triggering 0 polarity 1
[   15.557255] xen: --> pirq=17 -> irq=17 (gsi=17)
[   15.562y setup the GSI :17
[   15.583073] xen: registering gsi 17 triggering 0 polarity 1
[   15.588986] Already setup the GSI :17
[   15.594534] xen: registering gsi 18 triggering 0 polarity 1
[   15.600458] xen: --> pirq=18 -> irq=18 (gsi=18)
[   15.605699] xen: registering gsi 18 triggering 0 polarity 1
[   15.611597] Already setup the GSI :18
[   15.615994] PCI: CLS 64 bytes, default 64
[   15.620577] Unpacking initramfs...
[   18.857492] Freeing initrd memory: 93352K (ffff880004000000 - ffff880009b2a000)
[   18.865462] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[   18.874602] hw unit of domain pp0-core 2^-16 Joules
[   18.879829] hw unit of domain package 2^-16 Joules
[   18.884969] hw unit of domain pp1-gpu 2^-16 Joules
[   18.890135] Machine check injector initialized
[   18.896373] Scanning for low memory corruption every 60 seconds
[   18.905697] futex hash table entries: 256 (order: 2, 16384 bytes)
[   18.912296] audit: initializing netlink subsys (disabl[   18.940454] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   18.948670] NFS: Registering the id_resolver key type
[   18.954072] Key type id_resolver registered
[   18.958537] Key type id_legacy registered
[   18.962936] ntfs: driver 2.1.32 [Flags: R/W].
[   18.968181] SELinux:  Registering netfilter hooks
[   18.975401] bounce: pool size: 64 pages
[   18.979541] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[   18.987367] io scheduler noop registered
[   18.991615] io scheduler deadline registered
[   18.996254] io scheduler cfq registered (default)
[   19.003219] xen: registering gsi 16 triggering 0 polarity 1
[   19.009121] Already setup the GSI :16
[   19.015653] xen: registering gsi 17 triggering 0 polarity 1
[   19.021555] Already setup the GSI :17
[   19.028846] xen: registering gsi 18 triggering 0 polarity 1
[   19.034752] Already setup the GSI :18
[   19.039927] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[   19.047331] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[   19.054682] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[   19.062086] pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
[   19.069531] pcieport 0000:03:01.0: Signaling PME through PCIe PME interrupt
[   19.076973] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[   19.083964] pcieport 0000:03:02.0: Signaling PME through PCIe PME interrupt
[   19.091408] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[   19.098402] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[   19.105719] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[   19.113116] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[   19.120113] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[   19.127429] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[   19.134800] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[   19.141794] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[   19.149008] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   19.155009] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   19.162232] intel_idle: MWAIT substates: 0x1120
[   19.167028] intel_idle: v0.4 model 0x2A
[   19.171158] intel_idle: lapic_timer_reliable_states 0xffffffff
[   19.177398] intel_idle: intel_idle yielding to none
[   19.183105] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[   19.192226] ACPI: Power Button [PWRB]
[   19.196775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   19.204633] ACPI: Power Button [PWRF]
[   19.211067] Monitor-Mwait will be used to enter C-2 state
[   19.218991] Monitor-Mwait will be used to enter C-3 state
[   19.225291] Warning: Processor Platform Limit not supported.
[   19.231921] GHES: HEST is not enabled!
[   19.235933] ioatdma: Intel(R) QuickData Technology Driver 4.00
[   19.246921] xen: registering gsi 23 triggering 0 polarity 1
[   19.252837] Already setup the GSI :23
[   19.359342] xen: registering gsi 16 triggering 0 polarity 1
[   19.365261] Already setup the GSI :16
[   19.471272] xen_pciback: backend is vpci
[   19.680500] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   19.708583] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   19.722237] xen: registering gsi 17 trig[   19.753588] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A
[   19.763805] xen: registering gs
[   19.780665] KGDB: Registered I/O driver kgdboc
(XEN) d0: Forcing read-only access to MFN fed00
[   19.791719] hpet_acpi_add: no address or irqs in _CRS
[   19.797721] Non-volatile memory driver v1.3
[   19.802731] Linux agpgart interface v0.103
[   19.807562] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[   19.813928] AMD IOMMUv2 functionality not available on this system
[   19.820643] [drm] Initialized drm 1.1.0 20060810
[   19.842839] loop: module loaded
[   19.848364] zram: Added device: zram0
[   19.853659] libphy: Fixed MDIO Bus: probed
ersal TUN/TAP device driver, 1.6
[   19.863416] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   19.872157] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
[   19.882129] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[   19.890901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.897841] ehci-pci: EHCI PCI platform driver
[   19.902722] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   19.909297] ohci-pci: OHCI PCI platform driver
[   19.914170] uhci_hcd: USB Universal Host Controller Interface driver
[   19.921277] usbcore: registered new interface driver usblp
[   19.927270] usbcore: registered new interface driver usb-storage
[   19.933877] i8042: PNP: No PS/2 controller found. Probing ports directly.
[   19.943809] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75f09ba63, max_idle_ns: 440795347487 ns
[   19.956428] serio: i8042 KBD port at 0x60,0x64 irq 1
[   19.961718] serio: i8042 AUX port at 0x60,0x64 irq 12
[   19.968781] mousedev: PS/2 mouse device common for all mice
[   19.976452] rtc_cmos 00:02: RTC can wake from S4
[   19.982505] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   19.989136] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[   19.997709] xen: registering gsi 18 triggering 0 polarity 1
[   20.003621] Already setup the GSI :18
[   20.007788] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   20.014503] No iBFT detected.
[   20.018578] Netfilter messages via NETLINK v0.30.
[   20.023634] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   20.030305] ctnetlink v0.93: registering with nfnetlink.
[   20.036442] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.042195] Initializing XFRM netlink socket
[   20.046866] NET: Registered protocol family 10
[   20.053243] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.059385] sit: IPv6 over IPv4 tunneling driver
[   20.065882] NET: Registered protocol family 17
[   20.070626] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   20.084174] Key type dns_resolver registered
[   20.089287] mce: Unable to init device /dev/mcelog (rc: -16)
[   20.097897] registered taskstats version 1
[   20.102755] kmemleak: Kernel memory leak detector initialized
[   20.111689] kmemleak: Automatic memory scanning thread started
[   20.118387]   Magic number: 11:145:442
[   20.124109] PM: Hibernation image not present or could not be loaded.
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[   20.156084] Freeing unused kernel memory: 1836K (ffffffff81d00000 - ffffffff81ecb000)
[   20.164373] Write protecting the kernel read-only data: 12288k
[   20.176635] Freeing unused kernel memory: 696K (ffff880001752000 - ffff880001800000)
[   20.185936] Freeing unused kernel memory: 1712K (ffff880001a54000 - ffff880001c00000)
init started: BusyBox v1.14.3 (2015-08-26 14:27:10 EDT)
Mounting directories  [  OK  ]
mount: mount point /proc/bus/usb does not exist
mount: mount point /sys/kernel/config does not exist
FATAL: Error inserting xen_kbdfront (/lib/modules/4.2.0-rc8upstream-00008-g88c6774/kernel/drivers/input/misc/xen-kbdfront.ko): N^GFATAL: Error inserting xen_fbfront (/lib/modules/4.2.0-rc8upstream-00008-g88c6774/kernel/drivers/video/fbdev/xen-fbfront.ko): No such device
[   20.642429] xen_netfront: Initialising Xen virtual ethernet driver
[   20.661165] load_xen_module (1305) used greatest stack depth: 13368 bytes left
[   20.689916] udevd (1327): /proc/1327/oom_adj is deprecated, please use /proc/1327/oom_score_adj instead.
[   20.956137] clocksource: Switched to clocksource tsc
Waiting for devices [  OK  ]
[   21.148700] modprobe (2217) used greatest stack depth: 13240 bytes left
[   21.223097] tpm_tis 00:05: 1.2 TPM (device-id 0xFE, rev-id 70)
[   21.385499] modprobe (2229) used greatest stack depth: 12240 bytes left
udevd-work[1516]: error opening ATTR{/sys/devices/sG^G[   21.517540] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[   21.523741] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   21.531674] xen: registering gsi 20 triggering 0 polarity 1
[   21.537651] xen: --> pirq=20 -> irq=20 (gsi=20)
[   21.542760] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   21.648428] xen: registering gsi 20 triggering 0 polarity 1
[   21.654362] Already setup the GSI :20

[   21.688326] libata version 3.00 loaded.
[   21.837499] firewire_ohci 0000:08:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[   22.283173] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): Reset blocked by ME
[   22.349489] firewire_core 0000:08:03.0: created device fw0: GUID 00224dffff6c8799, S400
[   22.514296] e1000e 0000:00:19.0: PHY reset is blocked due to SOL/IDER session.
[   23.156263] e1000e 0000:00:19.0 eth0: registered PHC clock
[   23.162073] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:69:de:00
[   23.170535] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   23.177952] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[   23.186529] ahci 0000:00:1f.2: version 3.0
[   23.192515] xen: registering gsi 19 triggering 0 polarity 1
[   23.198473] xen: --> pirq=19 -> irq=19 (gsi=19)
[   23.204970] modprobe (2268) used greatest stack depth: 12224 bytes left
[   23.214129] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[   23.222690] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[   23.303238] scsi host0: ahci
[   23.311165] scsi host1: ahci
[   23.333132] scsi host2: ahci
[   23.341211] scsi host3: ahci
[   23.350441] scsi host4: ahci
[   23.360161] scsi host5: ahci
[   23.364658] ata1: SATA max UDMA/133 abar m2048@0xfbe2500025000 port 0xfbe25200 irq 43
[   23.383045] ata4: DUMMY
[   23.385712] ata5: DUMMY
[   23.388382] ata6: DUMMY
[   23.391754] xen: registering gsi 18 triggering 0 polarity 1
[   23.397687] Already setup the GSI :18
[   23.402160] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[   23.410757] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[   23.419438] ahci 0000:05:00.0: port 0 can do FBS, forcing FBSCP
[   23.425896] ahci 0000:05:00.0: port 1 can do FBS, forcing FBSCP
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[   23.446351] xen: registering gsi 18 triggering 0 polarity 1
[   23.452269] Already setup the GSI :18
[   23.487720] scsi host7: ata_generic
[   23.502132] scsi host8: ata_generic
[   23.506968] ata9: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf0f0 irq 18
[   ady setup the GSI :16
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[   23.587142] [drm] Memory usable by graphics device = 2048M
[   23.592970] [drm] Replacing VGA console driver
[   23.59909^G^G^G^G^G^G^G^G^G^G^G^G^G^G[   23.724136] scsi host6: ahci
[   23.737143] scsi host9: ahci
[   23.741657] ata7: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910100 irq 44
[   23.749494] ata8: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910180 irq 44
[   23.763086] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   23.769657] ata3: SATA link up 3.0 Gbps (SStatus 123 ^G[   23.781264] ata1.00: supports DRM functions and may not be fully accessible
[   23.796771] ata1.00: READ LOG DMA EXT failed, trying unqueued
[   23.808948] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[   23.815135] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[   23.822736] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[   23.830669] ata3.00: ATA-7: WDC WD800AAJS-18TDA1, 01.00A04, max UDMA/133
[   23.837767] ata3.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   23.859294] ata1.00: supports DRM functions and may not be fully accessible
[   23.867037] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   23.874064] [drm] Driver supports precise vblank timestamp query.
[   23.881767] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   23.920586] i915: No ACPI video bus found
[   23.925116] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0^G^G^G^G^G^G^G[   23.943108] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[   23.951297] ata1.00: configured for UDMA/133
[   23.957306] CPU: 0 PID: 15 Comm: kworker/u2:1 Not tainted 4.2.0-rc8upstream-00008-g88c6774 #1
[   23.966363] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
[   23.976177] Workqueue: events_unbound async_run_entry_fn
[   23.981856]  ffff8800090a3048 ffff880078847a98 ffffffff81744f01 ffffffff814e1810
[   23.989763]  ffff8800090a3048 ffff880078847ab8 ffffffff81335a79 ffff88006a64f000
[   23.997674]  ffff88006a64f000 ffff880078847ae8 ffffffff814dfb6b ffff88006a64f000
[   24.005578] Call Trace:
[   24.008267]  [<ffffffff81744f01>] dump_stack+0x4f/0x68
[   24.013772]  [<ffffffff814e1810>] ? scsi_done+0x70/0x70
[   24.019383]  [<ffffffff81335a79>] blk_queue_max_segment_size+0x19/0x50
[   24.026369]  [<ffffffff814dfb6b>] __scsi_init_queue+0xeb/0x170
[   24.032611]  [<ffffffff814dfc71>] __scsi_alloc_queue+0x31/0x40
[   24.038862]  [<ffffffff814dfc98>] scsi_alloc_queue+0x18/0x80
[   24.044937]  [<ffffffff814e3108>] scsi_alloc_sdev+0x1b8/0x300
[   24.051117]  [<ffffffff817492f5>] ? _raw_spin_unlock_irqrestore+0x15/0x20
[   24.058404]  [<ffffffff814e37bc>] scsi_probe_and_add_lun+0x43c/0xe30
[   24.065204]  [<ffffffff810cdb3a>] ? ___might_sleep+0xea/0x130
[   24.071368]  [<ffffffff810cdbcd>] ? __might_sleep+0x4d/0x90
[   24.077369]  [<ffffffff814b8e74>] ? attribute_container_add_device+0x104/0x140
[   24.085083]  [<ffffffff817492f5>] ? _raw_spin_unlock_irqrestore+0x15/0x20
[   24.092351]  [<ffffffff814bf377>] ? __pm_runtime_resume+0x67/0xa0
[   24.098861]  [<ffffffff814e465a>] __scsi_add_device+0x10a/0x130
[   24.105186]  [<ffffffffa009a321>] ata_scsi_scan_host+0xa1/0x1c0 [libata]
[   24.112354]  [<ffffffffa00972c8>] async_port_probe+0x48/0x60 [libata]
[   24.119250]  [<ffffffff810ca37a>] async_run_entry_fn+0x3a/0xf0
[   24.125498]  [<ffffffff810c2b32>] process_one_work+0x142/0x470
[   24.131761]  [<ffffffff810c2f78>] worker_thread+0x118/0x550
[   24.137756]  [<ffffffff817453df>] ? __schedule+0x32f/0x910
[   24.143649]  [<ffffffff810c2e60>] ? process_one_work+0x470/0x470
[   24.150073]  [<ffffffff810c2e60>] ? process_one_work+0x470/0x470
[   24.156524]  [<ffffffff810c7ea2>] kthread+0xd2/0xf0
[   24.161754]  [<ffffffff810d2480>] ? schedule_tail+0x20/0xd0
[   24.167742]  [<ffffffff810c7dd0>] ? kthread_freezable_should_stop+0x80/0x80
[   24.175180]  [<ffffffff81749c5f>] ret_from_fork+0x3f/0x70
[   24.180964]  [<ffffffff810c7dd0>] ? kthread_freezable_should_stop+0x80/0x80
[   24.189086] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[   24.201020] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[   24.210134] CPU: 0 PID: 2440 Comm: kworker/u2:2 Not tainted 4.2.0-rc8upstream-00008-g88c6774 #1
[   24.219344] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
[   24.229172] Workqueue: events_unbound async_run_entry_fn
[   24.234855]  ffff880069932820 ffff88006a50fa98 ffffffff81744f01 ffffffff814e1810
[   24.242758]  ffff880069932820 ffff88006a50fab8 ffffffff81335a79 ffff88006a5d3000
[   24.250648]  ffff88006a5d3000 ffff88006a50fae8 ffffffff814dfb6b ffff88006a5d3000
[   24.258544] Call Trace:
[   24.261232]  [<ffffffff81744f01>] dump_stack+0x4f/0x68
[   24.266746]  [<ffffffff814e1810>] ? scsi_done+0x70/0x70
[   24.272359]  [<ffffffff81335a79>] blk_queue_max_segment_size+0x19/0x50
[   24.279350]  [<ffffffff814dfb6b>] __scsi_init_queue+0xeb/0x170
[   24.285589]  [<ffffffff814dfc71>] __scsi_alloc_queue+0x31/0x40
[   24.291837]  [<ffffffff814dfc98>] scsi_alloc_queue+0x18/0x80
[   24.297910]  [<ffffffff814e3108>] scsi_alloc_sdev+0x1b8/0x300
[   24.304074]  [<ffffffff817492f5>] ? _raw_spin_unlock_irqrestore+0x15/0x20
[   24.311352]  [<ffffffff814e37bc>] scsi_probe_and_add_lun+0x43c/0xe30
[   24.318135]  [<ffffffff810cdb3a>] ? ___might_sleep+0xea/0x130
[   24.324292]  [<ffffffff810cdbcd>] ? __might_sleep+0x4d/0x90
[   24.330263]  [<ffffffff814b8e74>] ? attribute_container_add_device+0x104/0x140
[   24.337969]  [<ffffffff817492f5>] ? _raw_spin_unlock_irqrestore+0x15/0x20
[   24.345219]  [<ffffffff814bf377>] ? __pm_runtime_resume+0x67/0xa0
[   24.351751]  [<ffffffff814e465a>] __scsi_add_device+0x10a/0x130
[   24.358104]  [<ffffffffa009a321>] ata_scsi_scan_host+0xa1/0x1c0 [libata]
[   24.365272]  [<ffffffffa00972c8>] async_port_probe+0x48/0x60 [libata]
[   24.372159]  [<ffffffff810ca37a>] async_run_entry_fn+0x3a/0xf0
[   24.378399]  [<ffffffff810c2b32>] process_one_work+0x142/0x470
[   24.384657]  [<ffffffff810c2f78>] worker_thread+0x118/0x550
[   24.390642]  [<ffffffff817453df>] ? __schedule+0x32f/0x910
[   24.396549]  [<ffffffff810c2e60>] ? process_one_work+0x470/0x470
[   24.402981]  [<ffffffff810c2e60>] ? process_one_work+0x470/0x470
[   24.409405]  [<ffffffff810c7ea2>] kthread+0xd2/0xf0
[   24.414642]  [<ffffffff810d2480>] ? schedule_tail+0x20/0xd0
[   24.420624]  [<ffffffff810c7dd0>] ? kthread_freezable_should_stop+0x80/0x80
[   24.428045]  [<ffffffff81749c5f>] ret_from_fork+0x3f/0x70
[   24.433831]  [<ffffffff810c7dd0>] ? kthread_freezable_should_stop+0x80/0x80
[   24.441401] ata8: SATA link down (SStatus 0 SControl 370)
[   24.447186] ata7: SATA link down (SStatus 0 SControl 370)
[   24.453834] sd 0:0:0:0: [sda] Write Protect is off
[   24.458940] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.464512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.476653] scsi 2:0:0:0: Direct-Access     ATA      WDC WD800AAJS-18 0A04 PQ: 0 ANSI: 5
[   24.487458] sd 0:0:0:0: [sda] Attached SCSI disk
[   24.495622] sd 2:0:0:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[   24.505439] sd 2:0:0:0: [sdb] Write Protect is off
[   24.510536] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   24.516157] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.530162] random: nonblocking pool is initialized
[   24.537308] sd 2:0:0:0: [sdb] Attached SCSI disk
[   24.551092] fbcon: inteldrmfb (fb0) is primary device
[   24.610551] Console: switching to colour frame buffer device 160x64
[   24.627307] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   24.633919] i915 0000:00:02.0: registered panic notifier
[   24.693802] modprobe (2264) used greatest stack depth: 11824 bytes left
[   24.761326] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   24.767668] sd 2:0:0:0: Attached scsi generic sg1 type 0
Waiting for init.pre_custom [  OK  ]
Waiting for fb [  OK  ]
No plymouth. Disabling FB tests.
Waiting for network [  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  [   26.159707] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.169660] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   26.182386] device eth0 entered promiscuous mode
[   26.187466] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[G^G^G^G^G^G^G
Determining IP information for switch...[   26.308987] switch: port 1(eth0) entered forwarding state
[   26.314734] switch: port 1(eth0) entered forwarding state
 done.
[  OK  ]
touch: cannot touch `/var/lock/subsys/network': No such file or directory
Waiting for init.custom [  OK  ]

Starting SSHd ...

    SSH started [2884]


Waiting for SSHd [  OK  ]
WARNING: ssh currently running [2884] ignoring start request
No plymouth. Disabling FB tests.
[   28.285714] Loading iSCSI transport class v2.0-870.
[   28.299885] iscsi: registered transport (tcp)
iscsistart: transport class version 2.0-870. iscsid version 2.0-872
Could not get list of targets from firmware.
Aug 26 17:25:27 tst031 syslogd 1.5.0: restart.
Running in PV context on Xen^G[   28.432549] xen:xen_evtchn: Event-channel device installed
Starting /usr/sbin/xenstored...Aug 26 17:25:28 tst031 xenstored: TDB: tdb_open_ex: could not open file /var/lib/xenstored/tdb: N^GAug 26 17:25:28 tst031 xenstored: Checking store ...
Aug 26 17:25:28 tst031 xenstored: Checking store complete.

Setting domain 0 name, domid and JSON config...
Done setting up Dom0
Starting xenconsoled...
Starting QEMU as disk backend for dom0
Aug 26 17:25:28 tst031 iscsid: iSCSI daemon with pid=2949 started!
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault    root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Faultr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault    root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Faulte ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Faultroot_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Faulte ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Faultmmu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending FaultR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Faultr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending FaultR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff83042f6f6000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff830331329000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff83033352e000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
^G^G^G^G[0:0:0:0]    disk    ATA      Samsung SSD 850  1B6Q  /dev/sda 
[2:0:0:0]    disk    ATA      WDC WD800AAJS-18 0A04  /dev/sdb ^G00:00.0 Host bridge: Intel Corporation Device 0100 (rev 09)
00:01.0 PCI bridge: Intel Corporation Device 0101 (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
00:16.2 IDE interface: Intel Corporation Cougar Point IDE-r Controller (rev 04)
00:16.3 Serial controller: Intel Corporation Cougar Point KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation Device 1502 (rev 04)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4)
00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 7 (rev b4)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation Device 1c4e (rev 04)
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
02:00.0 PCI bridge: PLX Technology, Inc. Device 8613 (rev ba)
03:01.0 PCI bridge: PLX Technology, Inc. Device 8613 (rev ba)
03:02.0 PCI bridge: PLX Technology, Inc. Device 8613 (rev ba)
04:00.0 USB Controller: NEC Corporation Device 0194 (rev 03)
05:00.0 SATA controller: Device 1b4b:9123 (rev 10)
06:00.0 Serial controller: Oxford Semiconductor Ltd Device c138
07:00.0 USB Controller: NEC Corporation Device 0194 (rev 04)
08:03.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70)
           CPU0       
  1:          2  xen-pirq-ioapic-edge  i8042
  8:          1  xen-pirq-ioapic-edge  rtc0
  9:          3  xen-pirq-ioapic-level  acpi
 12:          4  xen-pirq-ioapic-edge  i8042
 18:          0  xen-pirq-ioapic-level  i801_smbus, ata_generic
 20:          2  xen-pirq-ioapic-level  firewire_ohci
 24:      10402  xen-percpu-virq      timer0
 25:          0  xen-percpu-ipi       spinlock0
 26:          0  xen-percpu-ipi       resched0(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff820040006000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff82004000b000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 27:          0  xen-percpu-ipi       callfunc0
 28:          0  xen-percpu-virq      debug0(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff82004000e000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040000000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 29:          0  xen-percpu-ipi       callfuncsingle0(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff820040004000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040006000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 30:          0  xen-percpu-ipi       irqwork0
 31:         77   xen-dyn-event     xenbus(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff820040007000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040008000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 32:          0   xen-dyn-virq      xen-pcpu(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff82004000a000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff82004000b000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 33:          0  xen-pirq-msi       PCIe PME
 34:          0  xen-pirq-msi       PCIe PME(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff82004000c000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040000000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 35:          0  xen-pirq-msi       PCIe PME
 36:          0  xen-pirq-msi       PCIe PME(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff820040004000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040006000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 40:          0   xen-dyn-virq      mce
 41:         73   xen-dyn-virq      hvc_console(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff820040007000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040008000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 42:         35  xen-pirq-msi       eth0(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff82004000a000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff82004000b000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 43:         25  xen-pirq-msi       0000:00:1f.2
 44:          0  xen-pirq-msi       0000:05:00.0(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff82004000e000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040000000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 45:        177  xen-pirq-msi       i915(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff820040004000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040006000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

 46:         24   xen-dyn-event     evtchn:xenstored
 47:          0   xen-dyn-event     evtchn:xenstored(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff820040007000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040008000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

NMI:          0   Non-maskable interrupts
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff82004000a000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff82004000b000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present
LOC:          0   Local timer interrupts
SPU:          0   Spurious interrupts(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff82004000c000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040000000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

PMI:          0   Performance monitoring interrupts
IWI:          0   IRQ work interrupts(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090
(XEN)     root_entry = ffff820040004000
(XEN)     root_entry[0] = 331329001
(XEN)     context = ffff820040009000
(XEN)     context[10] = 1_33352e001
(XEN)     l3 = ffff820040006000
(XEN)     l3_index = 127
(XEN)     l3[127] = 0
(XEN)     l3[127] not present

RTR:          0   APIC ICR read retries
RES:          0   Rescheduling interrupts
CAL:          0   Function call interrupts
TLB:          0   TLB shootdowns
TRM:          0   Thermal event interrupts
THR:          0   Threshold APIC interrupts
DFR:          0   Deferred Error APIC interrupts
MCE:          0   Machine check exceptions
MCP:          1   Machine check polls
HYP:      10762   Hypervisor callback interrupts
ERR:          0
MIS:          0
PIN:          0   Posted-interrupt notification event
PIW:          0   Posted-interrupt wakeup event
00000000-00000fff : reserved
00001000-00099fff : System RAM
0009a000-0009a7ff : RAM buffer
0009a800-000fffff : reserved
0
  000c0000-000dffff : PCI Bus 0000:00
    000c0000-000ce3ff : Video ROM
    000ce800-000cebff : Adapter ROM
    000cf000-000cffff : Adapter ROM
  000f0000-000fffff : System ROM
00100000-1fffffff : System RAM
  01000000-0174ebe1 : Kernel code
  0174ebe2-01cfe1bf : Kernel data
  01ed3000-0200efff : Kernel bss
20000000-201fffff : reserved
20200000-3fffffff : System RAM
40000000-401fffff : reserved
40200000-80465fff : System RAM
80466000-9e855fff : Unusable memory
9e856000-9e85efff : ACPI Tables
9e85f000-9e8a9fff : ACPI Non-volatile Storage
9e8aa000-9e8b1fff : Unusable memory
9e8b2000-9e9a4fff : reserved
9e9a5000-9e9a6fff : Unusable memory
9e9a7000-9ebc5fff : reserved
9ebc6000-9ebc6fff : Unusable memory
9ebc7000-9ebd6fff : reserved
9ebd7000-9ebf4fff : ACPI Non-volatile Storage
9ebf5000-9ec18fff : reserved
9ec19000-9ec5bfff : ACPI Non-volatile Storage
9ec5c000-9ee7bfff : reserved
9ee7c000-9effffff : Unusable memory
9f800000-bf9fffff : reserved
  9fa00000-bf9fffff : Graphics Stolen Memory
bfa00000-ffffffff : PCI Bus 0000:00
  d0000000-dfffffff : 0000:00:02.0
  e0000000-e3ffffff : PCI MMCONFIG 0000 [bus 00-3f]
    e0000000-e3ffffff : pnp 00:00
  fb000000-fb3fffff : 0000:00:02.0
  fb400000-fb8fffff : PCI Bus 0000:06
  fb900000-fbbfffff : PCI Bus 0000:02
    fb900000-fbafffff : PCI Bus 0000:03
      fb900000-fb9fffff : PCI Bus 0000:05
        fb900000-fb90ffff : 0000:05:00.0
        fb910000-fb9107ff : 0000:05:00.0
          fb910000-fb9107ff : ahci
      fba00000-fbafffff : PCI Bus 0000:04
        fba00000-fba01fff : 0000:04:00.0
    fbb00000-fbb1ffff : 0000:02:00.0
  fbc00000-fbcfffff : PCI Bus 0000:08
    fbc00000-fbc00fff : 0000:08:03.0
      fbc00000-fbc00fff : firewire_ohci
  fbd00000-fbdfffff : PCI Bus 0000:07
    fbd00000-fbd01fff : 0000:07:00.0
  fbe00000-fbe1ffff : 0000:00:19.0
    fbe00000-fbe1ffff : e1000e
  fbe20000-fbe23fff : 0000:00:1b.0
  fbe24000-fbe^G^G^G^G^G^G^G^G^G240ff : 0000:00:1f.3
  fbe25000-fbe257ff : 0000:00:1f.2
    fbe25000-fbe257ff : ahci
  fbe26000-fbe263ff : 0000:00:1d.0
  fbe27000-fbe273ff : 0000:00:1a.0
  fbe28000-fbe28fff : 0000:00:19.0
    fbe28000-fbe28fff : e1000e
  fbe29000-fbe29fff : 0000:00:16.3
  fbe2a000-fbe2a00f : 0000:00:16.0
  fec00000-fec00fff : reserved
    fec00000-fec003ff : IOAPIC 0
  fed00000-fed003ff : HPET 0
    fed00000-fed003ff : PNP0103:00
  fed08000-fed08fff : pnp 00:06
  fed10000-fed19fff : pnp 00:00
  fed1c000-fed3ffff : reserved
    fed1c000-fed1ffff : pnp 00:06
    fed20000-fed3ffff : pnp 00:00
  fed90000-fed91fff : reserved
  fee00000-feefffff : reserved
    fee00000-fee0ffff : pnp 00:00
      fee00000-fee00fff : Local APIC
  ff000000-ffffffff : reserved
    ff000000-ffffffff : pnp 00:06
100000000-43e5fffff : Unusable memory
MemTotal:        1978792 kB
MemFree:         1585284 kB
MemAvailable:    1583332 kB
Buffers:               0 kB
Cached:           311660 kB
SwapCached:            0 kB
Active:            62892 kB
Inactive:         251364 kB
Active(anon):      62892 kB
Inactive(anon):   251364 kB
Active(file):          0 kB
Inactive(file):        0 kB
Unevictable:        4956 kB
Mlocked:            4956 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:          7560 kB
Mapped:            11744 kB
Shmem:            311660 kB
Slab:              60272 kB
SReclaimable:      10124 kB
SUnreclaim:        50148 kB
KernelStack:        1488 kB
PageTables:         1028 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      989396 kB
Committed_AS:     338084 kB
VmallocTotal:   34359738367 kB
VmallocUsed:      349800 kB
VmallocChunk:   34358947836 kB
AnonHugePages:         0 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
DirectMap4k:     2097560 kB
DirectMap2M:           0 kB
Waiting for init.late [  OK  ]
... snip..

Re: VT-d faults with Integrated Intel graphics on 4.6

[Andrew Cooper]

On 26/08/15 18:28, Konrad Rzeszutek Wilk wrote:
> On Wed, Aug 26, 2015 at 06:20:34PM +0100, Andrew Cooper wrote:
>> On 26/08/15 18:15, Konrad Rzeszutek Wilk wrote:
>>> On Wed, Aug 26, 2015 at 05:19:39PM +0100, Malcolm Crossley wrote:
>>>> On 25/08/15 15:43, Konrad Rzeszutek Wilk wrote:
>>>>> On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
>>>>>> On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
>>>>>>> Hi everyone,
>>>>>>> I saw some people passingly mention this on the list before but just in
>>>>>>> case it has been missed, my serial is also being spammed with the following
>>>>>>> printouts with both Xen 4.6 RC1 and the latest staging build:
>>>>>>>
>>>>>>> ...
>>>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>>>> 33487d7000, iommu reg = ffff82c000201000
>>>>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>>>> 33487d7000, iommu reg = ffff82c000201000
>>>>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>>>> 33487d7000, iommu reg = ffff82c000201000
>>>>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>>>> 33487d7000, iommu reg = ffff82c000201000
>>>>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>>>>> 2610742000, iommu reg = ffff82c000201000
>>>>>>> (XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
>>>>>>> ...
>>>>>>>
>>>> I think this problem is caused by missing IOMMU mappings for the RMRR regions
>>>> if the domain does not have shared EPT enabled. This includes PV Dom 0.
>>>>
>>>> I have posted a patch to fix the issue:
>>>>
>>>> http://lists.xen.org/archives/html/xen-devel/2015-08/msg02090.html
>>> No dice. Still seeing the same problem :-(
>> Does your BIOS provide suitable extra RMRR regions when AMT is in use? 
>> IIRC, AMT uses the on-chip GPU as part of its VNC handling.

> (XEN)  0000000000000000 - 000000000009a800 (usable)
> (XEN)  000000000009a800 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 0000000020000000 (usable)
> (XEN)  0000000020000000 - 0000000020200000 (reserved)
> (XEN)  0000000020200000 - 0000000040000000 (usable)
> (XEN)  0000000040000000 - 0000000040200000 (reserved)
> (XEN)  0000000040200000 - 000000009e856000 (usable)
> (XEN)  000000009e856000 - 000000009e85f000 (ACPI data)
> (XEN)  000000009e85f000 - 000000009e8aa000 (ACPI NVS)
> (XEN)  000000009e8aa000 - 000000009e8b2000 (usable)
> (XEN)  000000009e8b2000 - 000000009e9a5000 (reserved)
> (XEN)  000000009e9a5000 - 000000009e9a7000 (usable)
> (XEN)  000000009e9a7000 - 000000009ebc6000 (reserved)
> (XEN)  000000009ebc6000 - 000000009ebc7000 (usable)
> (XEN)  000000009ebc7000 - 000000009ebd7000 (reserved)
> (XEN)  000000009ebd7000 - 000000009ebf5000 (ACPI NVS)
> (XEN)  000000009ebf5000 - 000000009ec19000 (reserved)
> (XEN)  000000009ec19000 - 000000009ec5c000 (ACPI NVS)
> (XEN)  000000009ec5c000 - 000000009ee7c000 (reserved)
> (XEN)  000000009ee7c000 - 000000009f000000 (usable)
> (XEN)  000000009f800000 - 00000000bfa00000 (reserved)
> (XEN)  00000000fed1c000 - 00000000fed40000 (reserved)
> (XEN)  00000000ff000000 - 0000000100000000 (reserved)
> (XEN)  0000000100000000 - 000000043e600000 (usable)
<snip>
> (XEN) [VT-D]dmar.c:809: Host address width 36

<snip>

> (XEN) [VT-D]dmar.c:823: found ACPI_DMAR_DRHD:
> (XEN) [VT-D]dmar.c:485:   dmaru->address = fed90000
> (XEN) [VT-D]iommu.c:1149: drhd->address = fed90000 iommu->reg = ffff82c000201000
> (XEN) [VT-D]iommu.c:1151: cap = c0000020e60262 ecap = f0101a
> (XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:02.0
> (XEN) [VT-D]dmar.c:823: found ACPI_DMAR_DRHD:
> (XEN) [VT-D]dmar.c:485:   dmaru->address = fed91000
> (XEN) [VT-D]iommu.c:1149: drhd->address = fed91000 iommu->reg = ffff82c000203000
> (XEN) [VT-D]iommu.c:1151: cap = c9008020660262 ecap = f0105a
> (XEN) [VT-D]dmar.c:410:  IOAPIC: 0000:f0:1f.0
> (XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.0
> (XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.1
> (XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.2
> (XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.3
> (XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.4
> (XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.5
> (XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.6
> (XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.7
> (XEN) [VT-D]dmar.c:499:   flags: INCLUDE_ALL
> (XEN) [VT-D]dmar.c:828: found ACPI_DMAR_RMRR:
> (XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:1d.0
> (XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:1a.0
> (XEN) [VT-D]dmar.c:694:   RMRR region: base_addr 9ebad000 end_address 9ebbbfff
> (XEN) [VT-D]dmar.c:828: found ACPI_DMAR_RMRR:
> (XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:02.0
> (XEN) [VT-D]dmar.c:694:   RMRR region: base_addr 9f800000 end_address bf9fffff
>
> There ^^^^ That is the device.
>
<snip> (although, that is a large RMRR...)
> (XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
> (XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 49c9090000, iommu reg = ffff82c000201000
> (XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> (XEN) print_vtd_entries: iommu ffff83042f6f7640 dev 0000:00:02.0 gmfn 49c9090

This faulting address is higher than top of ram as reported in the
e820.  Xen has legitimately not created IOMMU pagetables to map that
physical address.

Looks like something has programmed the GPU with a duff GTT.  I suspect
a firmware bug.

~Andrew

Re: VT-d faults with Integrated Intel graphics on 4.6

[Chen, Tiejun]

On 8/27/2015 12:19 AM, Malcolm Crossley wrote:
> On 25/08/15 15:43, Konrad Rzeszutek Wilk wrote:
>> On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
>>> On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
>>>> Hi everyone,
>>>> I saw some people passingly mention this on the list before but just in
>>>> case it has been missed, my serial is also being spammed with the following
>>>> printouts with both Xen 4.6 RC1 and the latest staging build:
>>>>
>>>> ...
>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>> 33487d7000, iommu reg = ffff82c000201000
>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>> 33487d7000, iommu reg = ffff82c000201000
>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>> 33487d7000, iommu reg = ffff82c000201000
>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>> 33487d7000, iommu reg = ffff82c000201000
>>>> (XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>>>> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>>>> 2610742000, iommu reg = ffff82c000201000
>>>> (XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
>>>> ...
>>>>
>>>
>
> I think this problem is caused by missing IOMMU mappings for the RMRR regions
> if the domain does not have shared EPT enabled. This includes PV Dom 0.

I don't think this is relevant to current problem.

>
> I have posted a patch to fix the issue:
>
> http://lists.xen.org/archives/html/xen-devel/2015-08/msg02090.html
>

And we already fixed this on 4.6.

Thanks
Tiejun

>
>
>>> What's your platform? BDW? And how much memory is set to your guest OS?
>>
>> Is see this as well. But oddly enough - only when I use the AMT feature
>> (normally I just use serial console on the machine).
>>
>> The platform is             /DQ67SW, BIOS
>> SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
>>
>> There is no guest OS - this is initial domain. And I boot with 2GB:
>>  Released 0 page(s)
>>
>> Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
>> Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
>> Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
>> Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
>> Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
>> Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
>> Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
>> Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
>> Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
>> Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
>> Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
>> Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
>> Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
>> Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
>> Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
>> Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
>> Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
>> Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
>> Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
>> Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
>> Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
>> Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
>> Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>> Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
>> Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
>> Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
>> Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>> Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
>>
>>>
>>> Just at first glance to fault address, this seems be issued from some
>>> known erratas on BDS and SKL.
>>
>> I am runnig v4.2-rc8.
>>>
>>> Thanks
>>> Tiejun
>>>
>>>> The device in question is an integrated Intel graphics card:
>>>>
>>>> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
>>>> Processor Family Integrated Graphics Controller (rev 09)
>>
>> Same device..
>
> This is a sandy bridge device which doesn't support shared EPT for GPU device.
>
>
>>>>
>>>> The only way I found to stop the messages from making my serial connection
>>>> useless was by assigning the device to xen-pciback.
>
> This will cause the GPU to be reset and the reset stopped the GPU accessing the
> RMRR region.
>
>>>>
>>>> Cheers,
>>>> Tamas
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xen.org
>>>> http://lists.xen.org/xen-devel
>>>>
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xen.org
>>> http://lists.xen.org/xen-devel
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xen.org
>> http://lists.xen.org/xen-devel
>>
>
>

Re: VT-d faults with Integrated Intel graphics on 4.6

[Chen, Tiejun]

On 8/25/2015 10:43 PM, Konrad Rzeszutek Wilk wrote:
> On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
>> On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
>> >Hi everyone,
>> >I saw some people passingly mention this on the list before but just in
>> >case it has been missed, my serial is also being spammed with the following
>> >printouts with both Xen 4.6 RC1 and the latest staging build:
>> >
>> >...
>> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >33487d7000, iommu reg = ffff82c000201000
>> >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >33487d7000, iommu reg = ffff82c000201000
>> >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >33487d7000, iommu reg = ffff82c000201000
>> >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >33487d7000, iommu reg = ffff82c000201000
>> >(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>> >(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >2610742000, iommu reg = ffff82c000201000
>> >(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
>> >...
>> >
>>
>> What's your platform? BDW? And how much memory is set to your guest OS?
>
> Is see this as well. But oddly enough - only when I use the AMT feature
> (normally I just use serial console on the machine).
>
> The platform is             /DQ67SW, BIOS
> SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
>
> There is no guest OS - this is initial domain. And I boot with 2GB:
>   Released 0 page(s)
>
> Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
> Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
> Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
> Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
> Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
> Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
> Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
> Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
> Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
> Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
> Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
> Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
> Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
> Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
> Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
> Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
> Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
> Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
> Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
> Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
> Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
> Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
> Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
> Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
> Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
>
>>
>> Just at first glance to fault address, this seems be issued from some

As you see those fault addresses are out of the normal memory range  here.

>> known erratas on BDS and SKL.
>
> I am runnig v4.2-rc8.

So I really doubt this is related to some erratas. Currently the 
pre-fetch unit of IOMMU unit dedicated to IGD can't work well on some 
platforms, so you can see these wired faults.

Thanks
Tiejun

>>
>> Thanks
>> Tiejun
>>
>> >The device in question is an integrated Intel graphics card:
>> >
>> >00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
>> >Processor Family Integrated Graphics Controller (rev 09)
>
> Same device..
>> >
>> >The only way I found to stop the messages from making my serial connection
>> >useless was by assigning the device to xen-pciback.
>> >
>> >Cheers,
>> >Tamas
>> >
>> >
>> >
>> >_______________________________________________
>> >Xen-devel mailing list
>> >Xen-devel@lists.xen.org
>> >http://lists.xen.org/xen-devel
>> >
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xen.org
>> http://lists.xen.org/xen-devel
>

Re: VT-d faults with Integrated Intel graphics on 4.6

[Konrad Rzeszutek Wilk]

On Thu, Aug 27, 2015 at 11:06:30AM +0800, Chen, Tiejun wrote:
> On 8/25/2015 10:43 PM, Konrad Rzeszutek Wilk wrote:
> >On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
> >>On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> >>>Hi everyone,
> >>>I saw some people passingly mention this on the list before but just in
> >>>case it has been missed, my serial is also being spammed with the following
> >>>printouts with both Xen 4.6 RC1 and the latest staging build:
> >>>
> >>>...
> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>33487d7000, iommu reg = ffff82c000201000
> >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>33487d7000, iommu reg = ffff82c000201000
> >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>33487d7000, iommu reg = ffff82c000201000
> >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>33487d7000, iommu reg = ffff82c000201000
> >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>2610742000, iommu reg = ffff82c000201000
> >>>(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> >>>...
> >>>
> >>
> >>What's your platform? BDW? And how much memory is set to your guest OS?
> >
> >Is see this as well. But oddly enough - only when I use the AMT feature
> >(normally I just use serial console on the machine).
> >
> >The platform is             /DQ67SW, BIOS
> >SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
> >
> >There is no guest OS - this is initial domain. And I boot with 2GB:
> >  Released 0 page(s)
> >
> >Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
> >Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
> >Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
> >Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
> >Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
> >Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
> >Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
> >Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
> >Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
> >Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
> >Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
> >Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
> >Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
> >Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
> >Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
> >Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
> >Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
> >Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
> >Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
> >Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
> >Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
> >Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
> >Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> >Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
> >Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
> >Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> >Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> >Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
> >
> >>
> >>Just at first glance to fault address, this seems be issued from some
> 
> As you see those fault addresses are out of the normal memory range  here.
> 
> >>known erratas on BDS and SKL.
> >
> >I am runnig v4.2-rc8.
> 
> So I really doubt this is related to some erratas. Currently the pre-fetch
> unit of IOMMU unit dedicated to IGD can't work well on some platforms, so
> you can see these wired faults.

Do you have some ideas for a solution/patch?

Thanks!

Re: VT-d faults with Integrated Intel graphics on 4.6

[Chen, Tiejun]

On 8/27/2015 7:03 PM, Konrad Rzeszutek Wilk wrote:
> On Thu, Aug 27, 2015 at 11:06:30AM +0800, Chen, Tiejun wrote:
>> On 8/25/2015 10:43 PM, Konrad Rzeszutek Wilk wrote:
>> >On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
>> >>On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
>> >>>Hi everyone,
>> >>>I saw some people passingly mention this on the list before but just in
>> >>>case it has been missed, my serial is also being spammed with the following
>> >>>printouts with both Xen 4.6 RC1 and the latest staging build:
>> >>>
>> >>>...
>> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >>>33487d7000, iommu reg = ffff82c000201000
>> >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >>>33487d7000, iommu reg = ffff82c000201000
>> >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >>>33487d7000, iommu reg = ffff82c000201000
>> >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >>>33487d7000, iommu reg = ffff82c000201000
>> >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
>> >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
>> >>>2610742000, iommu reg = ffff82c000201000
>> >>>(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
>> >>>...
>> >>>
>> >>
>> >>What's your platform? BDW? And how much memory is set to your guest OS?
>> >
>> >Is see this as well. But oddly enough - only when I use the AMT feature
>> >(normally I just use serial console on the machine).
>> >
>> >The platform is             /DQ67SW, BIOS
>> >SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
>> >
>> >There is no guest OS - this is initial domain. And I boot with 2GB:
>> >  Released 0 page(s)
>> >
>> >Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
>> >Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
>> >Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
>> >Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
>> >Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
>> >Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
>> >Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
>> >Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
>> >Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
>> >Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
>> >Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
>> >Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
>> >Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
>> >Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
>> >Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
>> >Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
>> >Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
>> >Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
>> >Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
>> >Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
>> >Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
>> >Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
>> >Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>> >Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
>> >Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
>> >Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
>> >Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>> >Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
>> >
>> >>
>> >>Just at first glance to fault address, this seems be issued from some
>>
>> As you see those fault addresses are out of the normal memory range  here.
>>
>> >>known erratas on BDS and SKL.
>> >
>> >I am runnig v4.2-rc8.
>>
>> So I really doubt this is related to some erratas. Currently the pre-fetch
>> unit of IOMMU unit dedicated to IGD can't work well on some platforms, so
>> you can see these wired faults.
>
> Do you have some ideas for a solution/patch?

I can't reproduce this on my BDW. And this is my assumption as well. So 
could anyone provide a log with iommu=debug?

Thanks
Tiejun

>
> Thanks!
>

Re: VT-d faults with Integrated Intel graphics on 4.6

[Konrad Rzeszutek Wilk]

On Fri, Aug 28, 2015 at 10:05:09AM +0800, Chen, Tiejun wrote:
> On 8/27/2015 7:03 PM, Konrad Rzeszutek Wilk wrote:
> >On Thu, Aug 27, 2015 at 11:06:30AM +0800, Chen, Tiejun wrote:
> >>On 8/25/2015 10:43 PM, Konrad Rzeszutek Wilk wrote:
> >>>On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
> >>>>On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> >>>>>Hi everyone,
> >>>>>I saw some people passingly mention this on the list before but just in
> >>>>>case it has been missed, my serial is also being spammed with the 
> >>following
> >>>>>printouts with both Xen 4.6 RC1 and the latest staging build:
> >>>>>
> >>>>>...
> >>>>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>>33487d7000, iommu reg = ffff82c000201000
> >>>>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>>33487d7000, iommu reg = ffff82c000201000
> >>>>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>>33487d7000, iommu reg = ffff82c000201000
> >>>>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>>33487d7000, iommu reg = ffff82c000201000
> >>>>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> >>>>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> >>>>>2610742000, iommu reg = ffff82c000201000
> >>>>>(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> >>>>>...
> >>>>>
> >>>>
> >>>>What's your platform? BDW? And how much memory is set to your guest OS?
> >>>
> >>>Is see this as well. But oddly enough - only when I use the AMT feature
> >>>(normally I just use serial console on the machine).
> >>>
> >>>The platform is             /DQ67SW, BIOS
> >>>SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
> >>>
> >>>There is no guest OS - this is initial domain. And I boot with 2GB:
> >>>  Released 0 page(s)
> >>>
> >>>Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
> >>>Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
> >>>Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
> >>>Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
> >>>Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
> >>>Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
> >>>Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
> >>>Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
> >>>Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
> >>>Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
> >>>Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
> >>>Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
> >>>Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
> >>>Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
> >>>Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
> >>>Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
> >>>Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
> >>>Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
> >>>Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
> >>>Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
> >>>Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
> >>>Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
> >>>Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> >>>Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
> >>>Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
> >>>Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> >>>Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> >>>Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
> >>>
> >>>>
> >>>>Just at first glance to fault address, this seems be issued from some
> >>
> >>As you see those fault addresses are out of the normal memory range  here.
> >>
> >>>>known erratas on BDS and SKL.
> >>>
> >>>I am runnig v4.2-rc8.
> >>
> >>So I really doubt this is related to some erratas. Currently the pre-fetch
> >>unit of IOMMU unit dedicated to IGD can't work well on some platforms, so
> >>you can see these wired faults.
> >
> >Do you have some ideas for a solution/patch?
> 
> I can't reproduce this on my BDW. And this is my assumption as well. So 
> could anyone provide a log with iommu=debug?

I did provide it in the previous email. See
http://lists.xen.org/archives/html/xen-devel/2015-08/msg02094.html
> 
> Thanks
> Tiejun
> 
> >
> >Thanks!
> >
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel

Re: VT-d faults with Integrated Intel graphics on 4.6

[Konrad Rzeszutek Wilk]

[-- Attachment #1: Type: text/plain, Size: 4466 bytes --]

On Thu, Aug 27, 2015 at 07:03:56AM -0400, Konrad Rzeszutek Wilk wrote:
> On Thu, Aug 27, 2015 at 11:06:30AM +0800, Chen, Tiejun wrote:
> > On 8/25/2015 10:43 PM, Konrad Rzeszutek Wilk wrote:
> > >On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
> > >>On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> > >>>Hi everyone,
> > >>>I saw some people passingly mention this on the list before but just in
> > >>>case it has been missed, my serial is also being spammed with the following
> > >>>printouts with both Xen 4.6 RC1 and the latest staging build:
> > >>>
> > >>>...
> > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >>>33487d7000, iommu reg = ffff82c000201000
> > >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >>>33487d7000, iommu reg = ffff82c000201000
> > >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >>>33487d7000, iommu reg = ffff82c000201000
> > >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >>>33487d7000, iommu reg = ffff82c000201000
> > >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> > >>>2610742000, iommu reg = ffff82c000201000
> > >>>(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> > >>>...
> > >>>
> > >>
> > >>What's your platform? BDW? And how much memory is set to your guest OS?
> > >
> > >Is see this as well. But oddly enough - only when I use the AMT feature
> > >(normally I just use serial console on the machine).
> > >
> > >The platform is             /DQ67SW, BIOS
> > >SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
> > >
> > >There is no guest OS - this is initial domain. And I boot with 2GB:
> > >  Released 0 page(s)
> > >
> > >Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
> > >Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
> > >Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
> > >Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
> > >Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
> > >Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
> > >Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
> > >Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
> > >Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
> > >Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
> > >Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
> > >Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
> > >Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
> > >Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
> > >Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
> > >Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
> > >Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
> > >Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
> > >Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
> > >Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
> > >Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
> > >Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
> > >Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> > >Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
> > >Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
> > >Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> > >Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> > >Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
> > >
> > >>
> > >>Just at first glance to fault address, this seems be issued from some
> > 
> > As you see those fault addresses are out of the normal memory range  here.
> > 
> > >>known erratas on BDS and SKL.
> > >
> > >I am runnig v4.2-rc8.
> > 
> > So I really doubt this is related to some erratas. Currently the pre-fetch
> > unit of IOMMU unit dedicated to IGD can't work well on some platforms, so
> > you can see these wired faults.
> 
> Do you have some ideas for a solution/patch?

ping?

Should I use some work-around flags? There does not seem to be any
corruption on the AMT screen - just that the 'xl dmesg' is packed with
VT-d faults.

Attaching the lspci, dmesg, xl dmesg, from the latest Xen.

> 
> Thanks!

[-- Attachment #2: lspci --]
[-- Type: text/plain, Size: 12747 bytes --]

00:00.0 Host bridge: Intel Corporation Device 0100 (rev 09)
	Subsystem: Intel Corporation Device 2008
	Flags: bus master, fast devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation Device 0101 (rev 09) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Capabilities: [88] Subsystem: Intel Corporation Device 2008
	Capabilities: [80] Power Management version 3
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [a0] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel
	Capabilities: [140] Root Complex Link
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Intel Corporation Device 2008
	Flags: bus master, fast devsel, latency 0, IRQ 42
	Memory at fb000000 (64-bit, non-prefetchable) [size=4M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at f000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [d0] Power Management version 2
	Capabilities: [a4] PCI Advanced Features
	Kernel driver in use: i915

00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
	Subsystem: Intel Corporation Device 2008
	Flags: fast devsel, IRQ 16
	Memory at fbe2a000 (64-bit, non-prefetchable) [disabled] [size=16]
	Capabilities: [50] Power Management version 3
	Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
	Kernel driver in use: pciback

00:16.2 IDE interface: Intel Corporation Cougar Point IDE-r Controller (rev 04) (prog-if 85 [Master SecO PriO])
	Subsystem: Intel Corporation Device 2008
	Flags: 66MHz, fast devsel, IRQ 18
	I/O ports at f130 [disabled] [size=8]
	I/O ports at f120 [disabled] [size=4]
	I/O ports at f110 [disabled] [size=8]
	I/O ports at f100 [disabled] [size=4]
	I/O ports at f0f0 [disabled] [size=16]
	Capabilities: [c8] Power Management version 3
	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Kernel driver in use: pciback

00:16.3 Serial controller: Intel Corporation Cougar Point KT Controller (rev 04) (prog-if 02 [16550])
	Subsystem: Intel Corporation Device 2008
	Flags: 66MHz, fast devsel, IRQ 17
	I/O ports at f0e0 [disabled] [size=8]
	Memory at fbe29000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Capabilities: [c8] Power Management version 3
	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Kernel driver in use: pciback

00:19.0 Ethernet controller: Intel Corporation Device 1502 (rev 04)
	Subsystem: Intel Corporation Device 2008
	Flags: bus master, fast devsel, latency 0, IRQ 40
	Memory at fbe00000 (32-bit, non-prefetchable) [size=128K]
	Memory at fbe28000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at f080 [size=32]
	Capabilities: [c8] Power Management version 2
	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [e0] PCI Advanced Features
	Kernel driver in use: e1000e

00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Device 2008
	Flags: medium devsel, IRQ 16
	Memory at fbe27000 (32-bit, non-prefetchable) [disabled] [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
	Kernel driver in use: pciback

00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
	Subsystem: Intel Corporation Device 2008
	Flags: bus master, fast devsel, latency 0, IRQ 7
	Memory at fbe20000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
	Capabilities: [100] Virtual Channel
	Capabilities: [130] Root Complex Link

00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fb900000-fbbfffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Intel Corporation Device 2008
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	Memory behind bridge: fb400000-fb8fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Intel Corporation Device 2008
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport

00:1c.6 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 7 (rev b4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	Memory behind bridge: fbd00000-fbdfffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Intel Corporation Device 2008
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Device 2008
	Flags: medium devsel, IRQ 23
	Memory at fbe26000 (32-bit, non-prefetchable) [disabled] [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
	Kernel driver in use: pciback

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
	Memory behind bridge: fbc00000-fbcfffff
	Capabilities: [50] Subsystem: Intel Corporation Device 2008

00:1f.0 ISA bridge: Intel Corporation Device 1c4e (rev 04)
	Subsystem: Intel Corporation Device 2008
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Intel Corporation Device 2008
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 41
	I/O ports at f0d0 [size=8]
	I/O ports at f0c0 [size=4]
	I/O ports at f0b0 [size=8]
	I/O ports at f0a0 [size=4]
	I/O ports at f060 [size=32]
	Memory at fbe25000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [70] Power Management version 3
	Capabilities: [a8] SATA HBA v1.0
	Capabilities: [b0] PCI Advanced Features
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
	Subsystem: Intel Corporation Device 2008
	Flags: medium devsel, IRQ 18
	Memory at fbe24000 (64-bit, non-prefetchable) [size=256]
	I/O ports at f040 [size=32]
	Kernel driver in use: i801_smbus

02:00.0 PCI bridge: PLX Technology, Inc. Device 8613 (rev ba) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Memory at fbb00000 (32-bit, non-prefetchable) [size=128K]
	Bus: primary=02, secondary=03, subordinate=05, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fb900000-fbafffff
	Capabilities: [40] Power Management version 3
	Capabilities: [48] MSI: Enable+ Count=1/4 Maskable+ 64bit+
	Capabilities: [68] Express Upstream Port, MSI 00
	Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8613
	Capabilities: [100] Device Serial Number ba-86-01-10-b5-df-0e-00
	Capabilities: [fb4] Advanced Error Reporting
	Capabilities: [138] Power Budgeting <?>
	Capabilities: [148] Virtual Channel
	Capabilities: [448] Vendor Specific Information: ID=0000 Rev=0 Len=0cc <?>
	Capabilities: [950] Vendor Specific Information: ID=0001 Rev=0 Len=010 <?>
	Kernel driver in use: pcieport

03:01.0 PCI bridge: PLX Technology, Inc. Device 8613 (rev ba) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
	Memory behind bridge: fba00000-fbafffff
	Capabilities: [40] Power Management version 3
	Capabilities: [48] MSI: Enable- Count=1/4 Maskable+ 64bit+
	Capabilities: [68] Express Downstream Port (Slot+), MSI 00
	Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8613
	Capabilities: [100] Device Serial Number ba-86-01-10-b5-df-0e-00
	Capabilities: [fb4] Advanced Error Reporting
	Capabilities: [148] Virtual Channel
	Capabilities: [520] Access Control Services
	Capabilities: [950] Vendor Specific Information: ID=0001 Rev=0 Len=010 <?>
	Kernel driver in use: pciback

03:02.0 PCI bridge: PLX Technology, Inc. Device 8613 (rev ba) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=03, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fb900000-fb9fffff
	Capabilities: [40] Power Management version 3
	Capabilities: [48] MSI: Enable- Count=1/4 Maskable+ 64bit+
	Capabilities: [68] Express Downstream Port (Slot+), MSI 00
	Capabilities: [a4] Subsystem: PLX Technology, Inc. Device 8613
	Capabilities: [100] Device Serial Number ba-86-01-10-b5-df-0e-00
	Capabilities: [fb4] Advanced Error Reporting
	Capabilities: [148] Virtual Channel
	Capabilities: [520] Access Control Services
	Capabilities: [950] Vendor Specific Information: ID=0001 Rev=0 Len=010 <?>
	Kernel driver in use: pciback

04:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) (prog-if 30)
	Subsystem: ASUSTeK Computer Inc. Device 8413
	Flags: fast devsel, IRQ 17
	Memory at fba00000 (64-bit, non-prefetchable) [disabled] [size=8K]
	Capabilities: [50] Power Management version 3
	Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
	Capabilities: [90] MSI-X: Enable- Count=8 Masked-
	Capabilities: [a0] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
	Capabilities: [150] #18
	Kernel driver in use: pciback

05:00.0 SATA controller: Device 1b4b:9123 (rev 10) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device 8400
	Flags: fast devsel, IRQ 18
	I/O ports at e040 [disabled] [size=8]
	I/O ports at e030 [disabled] [size=4]
	I/O ports at e020 [disabled] [size=8]
	I/O ports at e010 [disabled] [size=4]
	I/O ports at e000 [disabled] [size=16]
	Memory at fb910000 (32-bit, non-prefetchable) [disabled] [size=2K]
	Expansion ROM at fb900000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 3
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [70] Express Legacy Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Kernel driver in use: pciback

06:00.0 Serial controller: Oxford Semiconductor Ltd Device c138 (prog-if 02 [16550])
	Subsystem: Oxford Semiconductor Ltd Device c138
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at <ignored> (32-bit, non-prefetchable)
	Memory at <ignored> (32-bit, non-prefetchable)
	Memory at <ignored> (32-bit, non-prefetchable)
	Capabilities: [40] Power Management version 3
	Capabilities: [70] Express Endpoint, MSI 00
	Capabilities: [b0] MSI-X: Enable- Count=16 Masked-
	Capabilities: [100] Device Serial Number 00-30-e0-11-11-00-01-30
	Capabilities: [110] Power Budgeting <?>

07:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) (prog-if 30)
	Subsystem: Intel Corporation Device 2008
	Flags: fast devsel, IRQ 18
	Memory at fbd00000 (64-bit, non-prefetchable) [disabled] [size=8K]
	Capabilities: [50] Power Management version 3
	Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
	Capabilities: [90] MSI-X: Enable- Count=8 Masked-
	Capabilities: [a0] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
	Capabilities: [150] #18
	Kernel driver in use: pciback

08:03.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70) (prog-if 10 [OHCI])
	Subsystem: Intel Corporation Device 2008
	Flags: bus master, medium devsel, latency 32, IRQ 20
	Memory at fbc00000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: firewire_ohci


[-- Attachment #3: lspci.vt --]
[-- Type: text/plain, Size: 1203 bytes --]

-[0000:00]-+-00.0  Intel Corporation Device 0100
           +-01.0-[01]--
           +-02.0  Intel Corporation Sandy Bridge Integrated Graphics Controller
           +-16.0  Intel Corporation Cougar Point HECI Controller #1
           +-16.2  Intel Corporation Cougar Point IDE-r Controller
           +-16.3  Intel Corporation Cougar Point KT Controller
           +-19.0  Intel Corporation Device 1502
           +-1a.0  Intel Corporation Cougar Point USB Enhanced Host Controller #2
           +-1b.0  Intel Corporation Cougar Point High Definition Audio Controller
           +-1c.0-[02-05]----00.0-[03-05]--+-01.0-[04]----00.0  NEC Corporation Device 0194
           |                               \-02.0-[05]----00.0  Device 1b4b:9123
           +-1c.4-[06]----00.0  Oxford Semiconductor Ltd Device c138
           +-1c.6-[07]----00.0  NEC Corporation Device 0194
           +-1d.0  Intel Corporation Cougar Point USB Enhanced Host Controller #1
           +-1e.0-[08]----03.0  Agere Systems FW322/323
           +-1f.0  Intel Corporation Device 1c4e
           +-1f.2  Intel Corporation Cougar Point 6 port SATA AHCI Controller
           \-1f.3  Intel Corporation Cougar Point SMBus Controller

[-- Attachment #4: dmesg --]
[-- Type: text/plain, Size: 52187 bytes --]

[    0.000000] PAT configuration [0-7]: WB  WT  UC- UC  WC  WP  UC  UC  
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.12upstream (konrad@build-external.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Tue Dec 1 04:08:05 EST 2015
[    0.000000] Command line: debug console=hvc0 xen-blkback.log_stats=1 kgdboc=hvc0 xen-pciback.hide=(04:00.0)(07:00.0)(00:16.*)(03:01.0)(03:02.0)(00:1a.0)(00:1d.0)
[    0.000000] Released 0 page(s)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
[    0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
[    0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
[    0.000000] Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
[    0.000000] Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
[    0.000000] Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
[    0.000000] Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
[    0.000000] Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
[    0.000000] Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
[    0.000000] Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
[    0.000000] Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
[    0.000000] Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
[    0.000000] Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
[    0.000000] Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
[    0.000000] Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
[    0.000000] Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
[    0.000000] Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
[    0.000000] Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
[    0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[    0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI:                  /DQ67SW, BIOS SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
[    0.000000] Hypervisor detected: Xen
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x80466 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
[    0.000000]  [mem 0x7fe00000-0x7fffffff] page 4k
[    0.000000] BRK [0x0207a000, 0x0207afff] PGTABLE
[    0.000000] BRK [0x0207b000, 0x0207bfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x7fdfffff]
[    0.000000]  [mem 0x60000000-0x7fdfffff] page 4k
[    0.000000] BRK [0x0207c000, 0x0207cfff] PGTABLE
[    0.000000] BRK [0x0207d000, 0x0207dfff] PGTABLE
[    0.000000] BRK [0x0207e000, 0x0207efff] PGTABLE
[    0.000000] BRK [0x0207f000, 0x0207ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x1fffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x40200000-0x5fffffff]
[    0.000000]  [mem 0x40200000-0x5fffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x80000000-0x80465fff]
[    0.000000]  [mem 0x80000000-0x80465fff] page 4k
[    0.000000] RAMDISK: [mem 0x04000000-0x08d3efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
[    0.000000] ACPI: XSDT 0x000000009E856070 000064 (v01 INTEL  DQ67SW   01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000009E85DBC0 0000F4 (v04 INTEL  DQ67SW   01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000009E856168 007A54 (v02 INTEL  DQ67SW   00000016 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000009EBDBF80 000040
[    0.000000] ACPI: APIC 0x000000009E85DCB8 000072 (v03 INTEL  DQ67SW   01072009 AMI  00010013)
[    0.000000] ACPI: TCPA 0x000000009E85DD30 000032 (v02 INTEL  DQ67SW   00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x000000009E85DD68 000102 (v01 INTEL  DQ67SW   00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x000000009E85DE70 00003C (v01 INTEL  DQ67SW   01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000009E85DEB0 000038 (v01 INTEL  DQ67SW   01072009 AMI. 00000004)
[    0.000000] ACPI: ASF! 0x000000009E85DEE8 0000A0 (v32 INTEL  DQ67SW   00000001 TFSM 000F4240)
[    0.000000] ACPI: RMAD 0x000000009E85DF88 0000E8 (v01 INTEL  DQ67SW   00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Setting APIC routing to Xen PV.
[    0.000000] NUMA turned off
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000080465fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7fc11000-0x7fc14fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000080465fff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000099fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x0000000080465fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000080465fff]
[    0.000000] On node 0 totalpages: 524287
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 153 pages reserved
[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7128 pages used for memmap
[    0.000000]   DMA32 zone: 520294 pages, LIFO batch:31
[    0.000000] p2m virtual area at ffffc90000000000, size is 600000
[    0.000000] Remapped 1126 page(s)
[    0.000000] Reserving Intel graphics stolen memory at 0x9fa00000-0xbf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] e820: [mem 0xbfa00000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.7-unstable (preserve-AD)
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff880080200000 s99928 r8192 d31144 u524288
[    0.000000] pcpu-alloc: s99928 r8192 d31144 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] xen: PV spinlocks enabled
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516950
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: debug console=hvc0 xen-blkback.log_stats=1 kgdboc=hvc0 xen-pciback.hide=(04:00.0)(07:00.0)(00:16.*)(03:01.0)(03:02.0)(00:1a.0)(00:1d.0)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] software IO TLB [mem 0x791fe000-0x7d1fe000] (64MB) mapped at [ffff8800791fe000-ffff88007d1fdfff]
[    0.000000] Memory: 1894984K/2097148K available (7914K kernel code, 1191K rwdata, 3488K rodata, 2056K init, 1292K bss, 202164K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:33024 nr_irqs:256 16
[    0.000000] xen:events: Using FIFO-based ABI
[    0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[    0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[    0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[    0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[    0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[    0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[    0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[    0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[    0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[    0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[    0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[    0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[    0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[    0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[    0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [hvc0] enabled
[    0.000000] clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] tsc: Detected 3292.602 MHz processor
[   11.592512] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.20 BogoMIPS (lpj=3292602)
[   11.603679] pid_max: default: 32768 minimum: 301
[   11.608664] ACPI: Core revision 20150410
[   11.757828] ACPI: All ACPI Tables successfully acquired
[   11.763950] Security Framework initialized
[   11.768281] SELinux:  Initializing.
[   11.772038] SELinux:  Starting in permissive mode
[   11.778038] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   11.786395] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   11.794157] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[   11.801261] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[   11.810491] Initializing cgroup subsys freezer
[   11.815333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[   11.821662] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[   11.829184] CPU: Physical Processor ID: 0
[   11.833500] CPU: Processor Core ID: 0
[   11.837443] mce: CPU supports 2 MCE banks
[   11.841766] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[   11.847588] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[   11.914223] Freeing SMP alternatives memory: 32K (ffffffff81f2d000 - ffffffff81f35000)
[   11.932701] ftrace: allocating 29281 entries in 115 pages
[   11.960668] cpu 0 spinlock event irq 25
[   11.964719] Could not initialize VPMU for cpu 0, error -95
[   11.989088] Performance Events: 16-deep LBR, SandyBridge events, Broken PMU hardware detected, using software events only.
[   12.041835] Failed to access perfctr msr (MSR c8 is 0)
[   12.048361] x86: Booted up 1 node, 1 CPUs
[   12.052901] NMI watchdog: disabled (cpu0): hardware events not enabled
[   12.059786] NMI watchdog: Shutting down hard lockup detector on all cpus
[   12.067243] devtmpfs: initialized
[   12.079722] PM: Registering ACPI NVS region [mem 0x9e85f000-0x9e8a9fff] (307200 bytes)
[   12.088338] PM: Registering ACPI NVS region [mem 0x9ebd7000-0x9ebf4fff] (122880 bytes)
[   12.096784] PM: Registering ACPI NVS region [mem 0x9ec19000-0x9ec5bfff] (274432 bytes)
[   12.106015] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[   12.118753] kworker/u2:0 (16) used greatest stack depth: 14096 bytes left
[   12.126282] RTC time: 15:54:04, date: 12/01/15
[   12.131833] NET: Registered protocol family 16
[   12.136583] xen:grant_table: Grant tables using version 1 layout
[   12.142960] Grant table initialized
[   12.149392] ACPI: bus type PCI registered
[   12.153628] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[   12.162453] dca service started, version 1.12.1
[   12.167332] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[   12.177168] PCI: not using MMCONFIG
[   12.180901] PCI: Using configuration type 1 for base access
[   12.217136] kworker/u2:1 (28) used greatest stack depth: 13648 bytes left
[   12.255524] ACPI: Added _OSI(Module Device)
[   12.259935] ACPI: Added _OSI(Processor Device)
[   12.264671] ACPI: Added _OSI(3.0 _SCP Extensions)
[   12.269699] ACPI: Added _OSI(Processor Aggregator Device)
[   12.278639] xen: registering gsi 9 triggering 0 polarity 0
[   12.291700] ACPI: Executed 1 blocks of module-level executable AML code
[   12.386659] ACPI: Dynamic OEM Table Load:
[   12.390894] ACPI: SSDT 0xFFFF880078989640 000084 (v01 AMI    CST      00000001 MSFT 03000001)
[   12.405567] ACPI: Interpreter enabled
[   12.409454] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[   12.419254] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[   12.429100] ACPI: (supports S0 S3 S4 S5)
[   12.433255] ACPI: Using IOAPIC for interrupt routing
[   12.438823] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[   12.450400] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[   12.471307] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[   12.485667] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[   12.635528] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[   12.642075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[   12.658659] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[   12.671039] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[   12.684909] PCI host bridge to bus 0000:00
[   12.689277] pci_bus 0000:00: root bus resource [bus 00-ff]
[   12.695087] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[   12.702313] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[   12.709539] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[   12.716767] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[   12.724014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[   12.731970] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[   12.739926] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[   12.747940] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[   12.763423] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[   12.769964] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[   12.777478] pci 0000:00:01.0: System wakeup disabled by ACPI
[   12.787496] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[   12.793871] pci 0000:00:02.0: reg 0x10: [mem 0xfb000000-0xfb3fffff 64bit]
[   12.801081] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[   12.808746] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[   12.819765] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[   12.826156] pci 0000:00:16.0: reg 0x10: [mem 0xfbe2a000-0xfbe2a00f 64bit]
[   12.833591] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[   12.844857] pci 0000:00:16.2: [8086:1c3c] type 00 class 0x010185
[   12.851233] pci 0000:00:16.2: reg 0x10: [io  0xf130-0xf137]
[   12.857156] pci 0000:00:16.2: reg 0x14: [io  0xf120-0xf123]
[   12.863099] pci 0000:00:16.2: reg 0x18: [io  0xf110-0xf117]
[   12.869039] pci 0000:00:16.2: reg 0x1c: [io  0xf100-0xf103]
[   12.874982] pci 0000:00:16.2: reg 0x20: [io  0xf0f0-0xf0ff]
[   12.885759] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[   12.892147] pci 0000:00:16.3: reg 0x10: [io  0xf0e0-0xf0e7]
[   12.898072] pci 0000:00:16.3: reg 0x14: [mem 0xfbe29000-0xfbe29fff]
[   12.909635] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[   12.916028] pci 0000:00:19.0: reg 0x10: [mem 0xfbe00000-0xfbe1ffff]
[   12.922699] pci 0000:00:19.0: reg 0x14: [mem 0xfbe28000-0xfbe28fff]
[   12.929368] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[   12.935523] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[   12.943044] pci 0000:00:19.0: System wakeup disabled by ACPI
[   12.953047] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[   12.959447] pci 0000:00:1a.0: reg 0x10: [mem 0xfbe27000-0xfbe273ff]
[   12.966377] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[   12.973889] pci 0000:00:1a.0: System wakeup disabled by ACPI
[   12.983910] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[   12.990294] pci 0000:00:1b.0: reg 0x10: [mem 0xfbe20000-0xfbe23fff 64bit]
[   12.997770] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[   13.009035] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[   13.015643] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[   13.022157] pci 0000:00:1c.0: Enabling MPC IRBNCE
[   13.027125] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[   13.035337] pci 0000:00:1c.0: System wakeup disabled by ACPI
[   13.045364] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[   13.051981] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[   13.058490] pci 0000:00:1c.4: Enabling MPC IRBNCE
[   13.063450] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[   13.071653] pci 0000:00:1c.4: System wakeup disabled by ACPI
[   13.081637] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[   13.088236] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[   13.094740] pci 0000:00:1c.6: Enabling MPC IRBNCE
[   13.099703] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
[   13.107912] pci 0000:00:1c.6: System wakeup disabled by ACPI
[   13.117944] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[   13.124343] pci 0000:00:1d.0: reg 0x10: [mem 0xfbe26000-0xfbe263ff]
[   13.131288] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[   13.138802] pci 0000:00:1d.0: System wakeup disabled by ACPI
[   13.148809] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[   13.156434] pci 0000:00:1e.0: System wakeup disabled by ACPI
[   13.166420] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
[   13.177948] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[   13.184319] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[   13.190233] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[   13.196179] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[   13.202126] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[   13.208079] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[   13.214037] pci 0000:00:1f.2: reg 0x24: [mem 0xfbe25000-0xfbe257ff]
[   13.220886] pci 0000:00:1f.2: PME# supported from D3hot
[   13.231397] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[   13.237775] pci 0000:00:1f.3: reg 0x10: [mem 0xfbe24000-0xfbe240ff 64bit]
[   13.245032] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[   13.256318] pci 0000:00:01.0: PCI bridge to [bus 01]
[   13.262152] pci 0000:02:00.0: [10b5:8613] type 01 class 0x060400
[   13.268515] pci 0000:02:00.0: reg 0x10: [mem 0xfbb00000-0xfbb1ffff]
[   13.275508] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[   13.286141] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[   13.291662] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[   13.298146] pci 0000:00:1c.0:   bridge window [mem 0xfb900000-0xfbbfffff]
[   13.305997] pci 0000:03:01.0: [10b5:8613] type 01 class 0x060400
[   13.312740] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
[   13.323485] pci 0000:03:02.0: [10b5:8613] type 01 class 0x060400
[   13.330218] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[   13.341024] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[   13.346562] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[   13.353044] pci 0000:02:00.0:   bridge window [mem 0xfb900000-0xfbafffff]
[   13.360943] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[   13.367343] pci 0000:04:00.0: reg 0x10: [mem 0xfba00000-0xfba01fff 64bit]
[   13.374983] pci 0000:04:00.0: PME# supported from D0 D3hot
[   13.385208] pci 0000:03:01.0: PCI bridge to [bus 04]
[   13.390471] pci 0000:03:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
[   13.398340] pci 0000:05:00.0: [1b4b:9123] type 00 class 0x010601
[   13.404720] pci 0000:05:00.0: reg 0x10: [io  0xe040-0xe047]
[   13.410668] pci 0000:05:00.0: reg 0x14: [io  0xe030-0xe033]
[   13.416603] pci 0000:05:00.0: reg 0x18: [io  0xe020-0xe027]
[   13.422565] pci 0000:05:00.0: reg 0x1c: [io  0xe010-0xe013]
[   13.428525] pci 0000:05:00.0: reg 0x20: [io  0xe000-0xe00f]
[   13.434476] pci 0000:05:00.0: reg 0x24: [mem 0xfb910000-0xfb9107ff]
[   13.441145] pci 0000:05:00.0: reg 0x30: [mem 0xfb900000-0xfb90ffff pref]
[   13.448510] pci 0000:05:00.0: PME# supported from D3hot
[   13.458418] pci 0000:03:02.0: PCI bridge to [bus 05]
[   13.463678] pci 0000:03:02.0:   bridge window [io  0xe000-0xefff]
[   13.470168] pci 0000:03:02.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[   13.478043] pci 0000:06:00.0: [1415:c138] type 00 class 0x070002
[   13.484404] pci 0000:06:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[   13.492266] pci 0000:06:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[   13.500131] pci 0000:06:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[   13.508278] pci 0000:06:00.0: supports D1 D2
[   13.512772] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[   13.543652] pci 0000:00:1c.4: PCI bridge to [bus 06]
[   13.548922] pci 0000:00:1c.4:   bridge window [mem 0xfb400000-0xfb8fffff]
[   13.556755] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[   13.563161] pci 0000:07:00.0: reg 0x10: [mem 0xfbd00000-0xfbd01fff 64bit]
[   13.570793] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[   13.581492] pci 0000:00:1c.6: PCI bridge to [bus 07]
[   13.586731] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[   13.594476] pci 0000:08:03.0: [11c1:5811] type 00 class 0x0c0010
[   13.600858] pci 0000:08:03.0: reg 0x10: [mem 0xfbc00000-0xfbc00fff]
[   13.607804] pci 0000:08:03.0: supports D1 D2
[   13.612304] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot
[   13.622937] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[   13.630099] pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[   13.637343] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[   13.646355] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[   13.655426] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[   13.664477] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[   13.673534] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[   13.683319] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[   13.693109] pci 0000:00:1e.0:   bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[   13.708172] xen: registering gsi 13 triggering 1 polarity 0
[   13.721909] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   13.730408] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   13.738865] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[   13.747128] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[   13.755415] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   13.763870] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[   13.772509] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[   13.780942] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   13.789077] ACPI: Enabled 3 GPEs in block 00 to 3F
[   13.794416] xen:balloon: Initialising balloon driver
[   13.802129] xen_balloon: Initialising balloon driver
[   13.809082] vgaarb: setting as boot device: PCI:0000:00:02.0
[   13.815037] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[   13.824035] vgaarb: loaded
[   13.826894] vgaarb: bridge control possible 0000:00:02.0
[   13.833794] SCSI subsystem initialized
[   13.838178] ACPI: bus type USB registered
[   13.842725] usbcore: registered new interface driver usbfs
[   13.848653] usbcore: registered new interface driver hub
[   13.854363] usbcore: registered new device driver usb
[   13.860016] pps_core: LinuxPPS API ver. 1 registered
[   13.865257] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   13.875024] PTP clock support registered
[   13.879400] PCI: Using ACPI for IRQ routing
[   13.890155] PCI: pci_cache_line_size set to 64 bytes
[   13.895606] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
[   13.901936] e820: reserve RAM buffer [mem 0x80466000-0x83ffffff]
[   13.909985] NetLabel: Initializing
[   13.913578] NetLabel:  domain hash size = 128
[   13.918232] NetLabel:  protocols = UNLABELED CIPSOv4
[   13.923658] NetLabel:  unlabeled traffic allowed by default
[   13.938260] Switched to clocksource xen
[   14.065426] pnp: PnP ACPI init
[   14.070804] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[   14.077804] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[   14.084885] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[   14.092254] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[   14.099295] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[   14.106343] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[   14.116273] system 00:01: [io  0x0290-0x029f] has been reserved
[   14.122523] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[   14.133515] xen: registering gsi 8 triggering 1 polarity 0
[   14.139666] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[   14.147454] system 00:03: [io  0x04d0-0x04d1] has been reserved
[   14.153705] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[   14.164130] xen: registering gsi 4 triggering 1 polarity 0
[   14.169953] pnp 00:04: [dma 0 disabled]
[   14.174688] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[   14.183335] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[   14.195043] system 00:06: [io  0x0400-0x0453] could not be reserved
[   14.201688] system 00:06: [io  0x0458-0x047f] has been reserved
[   14.208009] system 00:06: [io  0x1180-0x119f] has been reserved
[   14.214334] system 00:06: [io  0x0500-0x057f] has been reserved
[   14.220678] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[   14.227740] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
[   14.235164] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[   14.242211] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[   14.249230] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[   14.257680] system 00:07: [io  0x0454-0x0457] has been reserved
[   14.263929] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[   14.275715] pnp: PnP ACPI: found 8 devices
[   14.280307] pciback 0000:00:16.0: seizing device
[   14.285205] pciback 0000:00:16.2: seizing device
[   14.290146] pciback 0000:00:16.3: seizing device
[   14.295122] pciback 0000:00:1a.0: seizing device
[   14.300173] pciback 0000:00:1d.0: seizing device
[   14.305271] pciback 0000:03:01.0: seizing device
[   14.310187] pciback 0000:03:02.0: seizing device
[   14.315137] pciback 0000:04:00.0: seizing device
[   14.320077] pciback 0000:05:00.0: seizing device
[   14.325039] pciback 0000:07:00.0: seizing device
[   14.357177] kworker/u2:1 (540) used greatest stack depth: 13440 bytes left
[   14.382368] PM-Timer failed consistency check  (0xffffff) - aborting.
[   14.389352] pci 0000:00:01.0: PCI bridge to [bus 01]
[   14.394609] pciback 0000:03:01.0: PCI bridge to [bus 04]
[   14.400316] pciback 0000:03:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
[   14.407879] pciback 0000:03:02.0: PCI bridge to [bus 05]
[   14.413543] pciback 0000:03:02.0:   bridge window [io  0xe000-0xefff]
[   14.420411] pciback 0000:03:02.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[   14.428015] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[   14.433576] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[   14.440070] pci 0000:02:00.0:   bridge window [mem 0xfb900000-0xfbafffff]
[   14.447308] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[   14.452869] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[   14.459370] pci 0000:00:1c.0:   bridge window [mem 0xfb900000-0xfbbfffff]
[   14.466618] pci 0000:00:1c.4: PCI bridge to [bus 06]
[   14.471908] pci 0000:00:1c.4:   bridge window [mem 0xfb400000-0xfb8fffff]
[   14.479168] pci 0000:00:1c.6: PCI bridge to [bus 07]
[   14.484453] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[   14.491704] pci 0000:00:1e.0: PCI bridge to [bus 08]
[   14.496998] pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[   14.504237] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[   14.510787] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[   14.517388] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[   14.523980] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[   14.530553] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[   14.537885] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[   14.545202] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[   14.552628] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[   14.558572] pci_bus 0000:02: resource 1 [mem 0xfb900000-0xfbbfffff]
[   14.565240] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[   14.571191] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfbafffff]
[   14.577848] pci_bus 0000:04: resource 1 [mem 0xfba00000-0xfbafffff]
[   14.584509] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[   14.590454] pci_bus 0000:05: resource 1 [mem 0xfb900000-0xfb9fffff]
[   14.597131] pci_bus 0000:06: resource 1 [mem 0xfb400000-0xfb8fffff]
[   14.603817] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
[   14.610487] pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff]
[   14.617152] pci_bus 0000:08: resource 4 [io  0x0000-0x03af window]
[   14.623725] pci_bus 0000:08: resource 5 [io  0x03e0-0x0cf7 window]
[   14.630322] pci_bus 0000:08: resource 6 [io  0x03b0-0x03df window]
[   14.636916] pci_bus 0000:08: resource 7 [io  0x0d00-0xffff window]
[   14.643505] pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
[   14.650831] pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
[   14.658152] pci_bus 0000:08: resource 10 [mem 0xbfa00000-0xffffffff window]
[   14.665764] NET: Registered protocol family 2
[   14.671210] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   14.678943] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[   14.685968] TCP: Hash tables configured (established 16384 bind 16384)
[   14.692974] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[   14.699354] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[   14.706498] NET: Registered protocol family 1
[   14.712350] RPC: Registered named UNIX socket transport module.
[   14.718597] RPC: Registered udp transport module.
[   14.723615] RPC: Registered tcp transport module.
[   14.728648] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.736311] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[   14.745412] pci 0000:00:02.0: Video device with shadowed ROM
[   14.752651] xen: registering gsi 16 triggering 0 polarity 1
[   14.758558] xen: --> pirq=16 -> irq=16 (gsi=16)
[   14.938588] xen: registering gsi 23 triggering 0 polarity 1
[   14.944519] xen: --> pirq=23 -> irq=23 (gsi=23)
[   15.125676] xen: registering gsi 17 triggering 0 polarity 1
[   15.131598] xen: --> pirq=17 -> irq=17 (gsi=17)
[   15.136867] xen: registering gsi 16 triggering 0 polarity 1
[   15.142744] Already setup the GSI :16
[   15.147108] xen: registering gsi 17 triggering 0 polarity 1
[   15.152987] Already setup the GSI :17
[   15.157353] xen: registering gsi 17 triggering 0 polarity 1
[   15.163226] Already setup the GSI :17
[   15.168890] xen: registering gsi 18 triggering 0 polarity 1
[   15.174819] xen: --> pirq=18 -> irq=18 (gsi=18)
[   15.180088] xen: registering gsi 18 triggering 0 polarity 1
[   15.185968] Already setup the GSI :18
[   15.190387] PCI: CLS 64 bytes, default 64
[   15.194977] Unpacking initramfs...
[   18.048378] Freeing initrd memory: 79100K (ffff880004000000 - ffff880008d3f000)
[   18.056296] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[   18.065375] hw unit of domain pp0-core 2^-16 Joules
[   18.070594] hw unit of domain package 2^-16 Joules
[   18.075725] hw unit of domain pp1-gpu 2^-16 Joules
[   18.087298] Machine check injector initialized
[   18.093666] Scanning for low memory corruption every 60 seconds
[   18.103173] futex hash table entries: 256 (order: 2, 16384 bytes)
[   18.109745] audit: initializing netlink subsys (disabled)
[   18.115527] audit: type=2000 audit(1448985248.922:1): initialized
[   18.126068] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   18.133525] VFS: Disk quotas dquot_6.6.0
[   18.137772] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   18.146225] NFS: Registering the id_resolver key type
[   18.151598] Key type id_resolver registered
[   18.156051] Key type id_legacy registered
[   18.160456] ntfs: driver 2.1.32 [Flags: R/W].
[   18.165686] SELinux:  Registering netfilter hooks
[   18.173064] bounce: pool size: 64 pages
[   18.177225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[   18.185034] io scheduler noop registered
[   18.189262] io scheduler deadline registered
[   18.193884] io scheduler cfq registered (default)
[   18.200986] xen: registering gsi 16 triggering 0 polarity 1
[   18.206883] Already setup the GSI :16
[   18.213618] xen: registering gsi 17 triggering 0 polarity 1
[   18.219526] Already setup the GSI :17
[   18.225916] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[   18.233325] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[   18.240643] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[   18.248017] pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
[   18.255394] pciback 0000:03:01.0: Signaling PME through PCIe PME interrupt
[   18.262721] pciback 0000:04:00.0: Signaling PME through PCIe PME interrupt
[   18.270065] pciback 0000:03:02.0: Signaling PME through PCIe PME interrupt
[   18.277387] pciback 0000:05:00.0: Signaling PME through PCIe PME interrupt
[   18.284727] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[   18.292059] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[   18.299401] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[   18.306365] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[   18.313660] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[   18.321021] pciback 0000:07:00.0: Signaling PME through PCIe PME interrupt
[   18.328360] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[   18.335552] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.341633] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   18.348902] intel_idle: MWAIT substates: 0x1120
[   18.353676] intel_idle: v0.4 model 0x2A
[   18.357804] intel_idle: lapic_timer_reliable_states 0xffffffff
[   18.364025] intel_idle: intel_idle yielding to none
[   18.369755] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[   18.378862] ACPI: Power Button [PWRB]
[   18.383428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   18.391241] ACPI: Power Button [PWRF]
[   18.398150] Monitor-Mwait will be used to enter C-2 state
[   18.405609] Monitor-Mwait will be used to enter C-3 state
[   18.411726] Warning: Processor Platform Limit not supported.
[   18.418283] GHES: HEST is not enabled!
[   18.422274] ioatdma: Intel(R) QuickData Technology Driver 4.00
[   18.432911] xen: registering gsi 18 triggering 0 polarity 1
[   18.438793] Already setup the GSI :18
[   19.092147] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75ff74cac, max_idle_ns: 440795216137 ns
[   19.447411] xen: registering gsi 18 triggering 0 polarity 1
[   19.453309] Already setup the GSI :18
[   19.457649] xen: registering gsi 18 triggering 0 polarity 1
[   19.463546] Already setup the GSI :18
[   19.490256] xen: registering gsi 17 triggering 0 polarity 1
[   19.496129] Already setup the GSI :17
[   20.102226] Switched to clocksource tsc
[   20.507251] xen: registering gsi 23 triggering 0 polarity 1
[   20.513140] Already setup the GSI :23
[   20.620701] xen: registering gsi 16 triggering 0 polarity 1
[   20.626605] Already setup the GSI :16
[   20.733706] xen: registering gsi 17 triggering 0 polarity 1
[   20.739591] Already setup the GSI :17
[   20.746125] xen: registering gsi 18 triggering 0 polarity 1
[   20.752012] Already setup the GSI :18
[   20.758576] xen: registering gsi 16 triggering 0 polarity 1
[   20.764455] Already setup the GSI :16
[   20.769806] xen_pciback: backend is vpci
[   20.992434] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   21.020459] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   21.033614] xen: registering gsi 16 triggering 0 polarity 1
[   21.039550] Already setup the GSI :16
[   21.044057] serial: probe of 0000:06:00.0 failed with error -12
[   21.050402] KGDB: Registered I/O driver kgdboc
[   21.061822] hpet_acpi_add: no address or irqs in _CRS
[   21.067808] Non-volatile memory driver v1.3
[   21.072897] Linux agpgart interface v0.103
[   21.077728] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[   21.084055] AMD IOMMUv2 functionality not available on this system
[   21.090759] [drm] Initialized drm 1.1.0 20060810
[   21.114038] loop: module loaded
[   21.119181] libphy: Fixed MDIO Bus: probed
[   21.123532] tun: Universal TUN/TAP device driver, 1.6
[   21.128920] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   21.138034] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
[   21.147944] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[   21.156681] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   21.163594] ehci-pci: EHCI PCI platform driver
[   21.168454] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   21.174996] ohci-pci: OHCI PCI platform driver
[   21.179848] uhci_hcd: USB Universal Host Controller Interface driver
[   21.186909] usbcore: registered new interface driver usblp
[   21.192886] usbcore: registered new interface driver usb-storage
[   21.199495] i8042: PNP: No PS/2 controller found. Probing ports directly.
[   21.211822] serio: i8042 KBD port at 0x60,0x64 irq 1
[   21.217072] serio: i8042 AUX port at 0x60,0x64 irq 12
[   21.224317] mousedev: PS/2 mouse device common for all mice
[   21.232137] rtc_cmos 00:02: RTC can wake from S4
[   21.238214] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   21.244772] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[   21.253455] xen: registering gsi 18 triggering 0 polarity 1
[   21.259339] Already setup the GSI :18
[   21.263495] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   21.270238] No iBFT detected.
[   21.274661] Netfilter messages via NETLINK v0.30.
[   21.279719] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   21.286418] ctnetlink v0.93: registering with nfnetlink.
[   21.292565] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.298322] Initializing XFRM netlink socket
[   21.302987] NET: Registered protocol family 10
[   21.309927] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   21.316075] sit: IPv6 over IPv4 tunneling driver
[   21.322619] NET: Registered protocol family 17
[   21.327351] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   21.340851] Key type dns_resolver registered
[   21.345982] mce: Unable to init device /dev/mcelog (rc: -16)
[   21.354682] registered taskstats version 1
[   21.359481] kmemleak: Kernel memory leak detector initialized
[   21.368575] kmemleak: Automatic memory scanning thread started
[   21.375412]   Magic number: 11:592:941
[   21.379415] tty ptyyc: hash matches
[   21.384908] PM: Hibernation image not present or could not be loaded.
[   21.416790] Freeing unused kernel memory: 2056K (ffffffff81d2b000 - ffffffff81f2d000)
[   21.425062] Write protecting the kernel read-only data: 12288k
[   21.436925] Freeing unused kernel memory: 264K (ffff8800017be000 - ffff880001800000)
[   21.445503] Freeing unused kernel memory: 608K (ffff880001b68000 - ffff880001c00000)
[   21.493156] uname (1273) used greatest stack depth: 13424 bytes left
[   21.840481] xen_netfront: Initialising Xen virtual ethernet driver
[   21.883391] udevd (1327): /proc/1327/oom_adj is deprecated, please use /proc/1327/oom_score_adj instead.
[   22.148344] tpm_tis 00:05: 1.2 TPM (device-id 0xFE, rev-id 70)
[   22.343791] modprobe (1440) used greatest stack depth: 12936 bytes left
[   22.400836] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   22.406987] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   22.414998] xen: registering gsi 20 triggering 0 polarity 1
[   22.420953] xen: --> pirq=20 -> irq=20 (gsi=20)
[   22.426045] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   22.553076] libata version 3.00 loaded.
[   22.563042] xen: registering gsi 20 triggering 0 polarity 1
[   22.568951] Already setup the GSI :20
[   22.699145] firewire_ohci 0000:08:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[   22.780744] modprobe (1621) used greatest stack depth: 12696 bytes left
[   23.036244] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): Reset blocked by ME
[   23.209755] firewire_core 0000:08:03.0: created device fw0: GUID 00224dffff6c8799, S400
[   23.258755] e1000e 0000:00:19.0: PHY reset is blocked due to SOL/IDER session.
[   23.920669] e1000e 0000:00:19.0 eth0: registered PHC clock
[   23.926469] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:69:de:00
[   23.934887] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   23.942271] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[   23.950116] ahci 0000:00:1f.2: version 3.0
[   23.956109] xen: registering gsi 19 triggering 0 polarity 1
[   23.962050] xen: --> pirq=19 -> irq=19 (gsi=19)
[   23.968627] modprobe (1565) used greatest stack depth: 12288 bytes left
[   23.978372] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[   23.986915] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[   24.064163] scsi host0: ahci
[   24.082548] scsi host1: ahci
[   24.092307] scsi host2: ahci
[   24.102338] scsi host3: ahci
[   24.111517] scsi host4: ahci
[   24.121297] scsi host5: ahci
[   24.125867] ata1: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25100 irq 41
[   24.133669] ata2: DUMMY
[   24.136327] ata3: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25200 irq 41
[   24.144191] ata4: DUMMY
[   24.146855] ata5: DUMMY
[   24.149527] ata6: DUMMY
[   24.158989] xen: registering gsi 16 triggering 0 polarity 1
[   24.164864] Already setup the GSI :16
[   24.205507] [drm] Memory usable by graphics device = 2048M
[   24.211329] [drm] Replacing VGA console driver
[   24.217457] Console: switching to colour dummy device 80x25
[   24.364473] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   24.371471] [drm] Driver supports precise vblank timestamp query.
[   24.379194] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   24.417265] i915: No ACPI video bus found
[   24.421768] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[   24.477440] fbcon: inteldrmfb (fb0) is primary device
[   24.531282] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   24.531307] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   24.532829] ata1.00: supports DRM functions and may not be fully accessible
[   24.532975] ata1.00: READ LOG DMA EXT failed, trying unqueued
[   24.533028] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[   24.533030] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[   24.533031] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[   24.534541] ata1.00: supports DRM functions and may not be fully accessible
[   24.534637] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[   24.534746] ata1.00: configured for UDMA/133
[   24.536703] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[   24.540087] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[   24.540552] sd 0:0:0:0: [sda] Write Protect is off
[   24.540555] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.540691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.546530] ata3.00: ATA-7: WDC WD800AAJS-18TDA1, 01.00A04, max UDMA/133
[   24.546532] ata3.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   24.547404] ata3.00: configured for UDMA/133
[   24.548621] scsi 2:0:0:0: Direct-Access     ATA      WDC WD800AAJS-18 0A04 PQ: 0 ANSI: 5
[   24.551808] sd 2:0:0:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[   24.552136] sd 2:0:0:0: [sdb] Write Protect is off
[   24.552139] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   24.552310] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.554084]  sda:
[   24.557121] sd 0:0:0:0: [sda] Attached SCSI disk
[   24.558691] Console: switching to colour frame buffer device 160x64
[   24.735061] random: nonblocking pool is initialized
[   24.746960] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   24.753559] i915 0000:00:02.0: registered panic notifier
[   24.763465]  sdb: sdb1
[   24.763465]  sdb1: <netbsd: sdb5 sdb6 >
[   24.774740] sd 2:0:0:0: [sdb] Attached SCSI disk
[   24.780935] modprobe (1564) used greatest stack depth: 11968 bytes left
[   24.882453] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   24.888847] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   26.308950] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.318852] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   26.331567] device eth0 entered promiscuous mode
[   26.336617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.456516] switch: port 1(eth0) entered forwarding state
[   26.462237] switch: port 1(eth0) entered forwarding state
[   28.419385] Loading iSCSI transport class v2.0-870.
[   28.433268] iscsi: registered transport (tcp)
[   28.561513] xen:xen_evtchn: Event-channel device installed
[   33.140026] mount.nfs (2963) used greatest stack depth: 11616 bytes left
[   33.747064] scsi host6: iSCSI Initiator over TCP/IP
[   34.027368] scsi 6:0:0:0: Direct-Access     LIO-ORG  IBLOCK           4.0  PQ: 0 ANSI: 5
[   34.043212] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   34.050907] sd 6:0:0:0: [sdc] 1953380352 512-byte logical blocks: (1.00 TB/931 GiB)
[   34.059022] sd 6:0:0:0: [sdc] 4096-byte physical blocks
[   34.094413] sd 6:0:0:0: [sdc] Write Protect is off
[   34.099474] sd 6:0:0:0: [sdc] Mode Sense: 43 00 10 08
[   34.112256] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[   34.122780] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   34.136153] device-mapper: multipath: version 1.9.0 loaded
[   34.191978] sd 6:0:0:0: [sdc] Attached SCSI disk
[   41.509686] switch: port 1(eth0) entered forwarding state
[  526.844468] device vif1.0 entered promiscuous mode
[  526.854393] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
[  531.575009] xen-blkback: event-channel 11
[  531.580090] xen-blkback: /local/domain/1/device/vbd/51712:using single page: ring-ref 8
[  531.589100] xen-blkback: ring-pages:1, event-channel 11, protocol 1 (x86_64-abi) 
[  531.649652] xen-blkback: (blkback.1.xvda): oo   0  |  rd    1  |  wr    0  |  f    0  |  ds    0 | pg:    0/1056
[  535.442733] vif vif-1-0 vif1.0: Guest Rx ready
[  535.447691] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
[  535.454624] switch: port 2(vif1.0) entered forwarding state
[  535.460535] switch: port 2(vif1.0) entered forwarding state
[  541.705096] xen-blkback: (blkback.1.xvda): oo   0  |  rd 1242  |  wr    3  |  f    0  |  ds    0 | pg:    0/1056
[  550.514291] switch: port 2(vif1.0) entered forwarding state
[  551.717513] xen-blkback: (blkback.1.xvda): oo   0  |  rd 4857  |  wr  681  |  f    0  |  ds    0 | pg:    0/1056
[  561.843589] xen-blkback: (blkback.1.xvda): oo   0  |  rd  852  |  wr  235  |  f    0  |  ds    0 | pg:    0/1056
[  571.862835] xen-blkback: (blkback.1.xvda): oo   0  |  rd    0  |  wr  151  |  f    0  |  ds    0 | pg:    0/1056
[  581.935092] xen-blkback: (blkback.1.xvda): oo   0  |  rd    0  |  wr  224  |  f    0  |  ds    0 | pg:    0/1056
[  591.982333] xen-blkback: (blkback.1.xvda): oo   0  |  rd    9  |  wr   22  |  f    0  |  ds    0 | pg:    0/1056
[  602.014582] xen-blkback: (blkback.1.xvda): oo   0  |  rd   52  |  wr   24  |  f    0  |  ds    0 | pg:    0/1056
[  612.108949] xen-blkback: (blkback.1.xvda): oo   0  |  rd   59  |  wr   65  |  f    0  |  ds    0 | pg:    0/1056
[  622.193101] xen-blkback: (blkback.1.xvda): oo   0  |  rd    0  |  wr   21  |  f    0  |  ds    0 | pg:    0/1056
[  632.269349] xen-blkback: (blkback.1.xvda): oo   0  |  rd    3  |  wr   34  |  f    0  |  ds    0 | pg:    0/1056
[  642.324599] xen-blkback: (blkback.1.xvda): oo   0  |  rd   15  |  wr   96  |  f    0  |  ds    0 | pg:    0/1056
[  652.390846] xen-blkback: (blkback.1.xvda): oo   0  |  rd   11  |  wr   12  |  f    0  |  ds    0 | pg:    0/1056
[  657.314418] switch: port 2(vif1.0) entered disabled state
[  657.337133] xen-blkback: (blkback.1.xvda): oo   0  |  rd    0  |  wr  143  |  f    0  |  ds    0 | pg:    0/1056
[  657.385045] switch: port 2(vif1.0) entered disabled state
[  657.390847] device vif1.0 left promiscuous mode
[  657.395623] switch: port 2(vif1.0) entered disabled state
[  657.617676] block (3404) used greatest stack depth: 11576 bytes left

[-- Attachment #5: xl --]
[-- Type: text/plain, Size: 18675 bytes --]

(XEN) VPMU: unknown flag: nmi - vpmu disabled!
 Xen 4.7-unstable
(XEN) Xen version 4.7-unstable (konrad@(none)) (gcc (GCC) 4.4.4 20100503 (Red Hat 4.4.4-2)) debug=y Tue Dec  1 04:08:16 EST 2015
(XEN) Latest ChangeSet: Mon Nov 16 13:38:33 2015 +0000 git:d07f63f
(XEN) Console output is synchronous.
(XEN) Bootloader: unknown
(XEN) Command line: iommu=verbose,debug dom0pvh=0 ucode=scan vpmu=nmi conring_size=2097152 pci=assign-buses,verbose com1=115200,8n1,pci console=com1 tmem=1 tmem_compress=1 tmem_dedup=1 sync_console dom0_max_vcpus=1 cpufreq=xen:performance dom0_mem=max:2G apic=debug loglvl=all guest_loglvl=all
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN)  Found 2 MBR signatures
(XEN)  Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009a800 (usable)
(XEN)  000000000009a800 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 0000000020000000 (usable)
(XEN)  0000000020000000 - 0000000020200000 (reserved)
(XEN)  0000000020200000 - 0000000040000000 (usable)
(XEN)  0000000040000000 - 0000000040200000 (reserved)
(XEN)  0000000040200000 - 000000009e856000 (usable)
(XEN)  000000009e856000 - 000000009e85f000 (ACPI data)
(XEN)  000000009e85f000 - 000000009e8aa000 (ACPI NVS)
(XEN)  000000009e8aa000 - 000000009e8b2000 (usable)
(XEN)  000000009e8b2000 - 000000009e9a5000 (reserved)
(XEN)  000000009e9a5000 - 000000009e9a7000 (usable)
(XEN)  000000009e9a7000 - 000000009ebc6000 (reserved)
(XEN)  000000009ebc6000 - 000000009ebc7000 (usable)
(XEN)  000000009ebc7000 - 000000009ebd7000 (reserved)
(XEN)  000000009ebd7000 - 000000009ebf5000 (ACPI NVS)
(XEN)  000000009ebf5000 - 000000009ec19000 (reserved)
(XEN)  000000009ec19000 - 000000009ec5c000 (ACPI NVS)
(XEN)  000000009ec5c000 - 000000009ee7c000 (reserved)
(XEN)  000000009ee7c000 - 000000009f000000 (usable)
(XEN)  000000009f800000 - 00000000bfa00000 (reserved)
(XEN)  00000000fed1c000 - 00000000fed40000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 000000043e600000 (usable)
(XEN) ACPI: RSDP 000F0450, 0024 (r2  INTEL)
(XEN) ACPI: XSDT 9E856070, 0064 (r1 INTEL  DQ67SW    1072009 AMI     10013)
(XEN) ACPI: FACP 9E85DBC0, 00F4 (r4 INTEL  DQ67SW    1072009 AMI     10013)
(XEN) ACPI: DSDT 9E856168, 7A54 (r2 INTEL  DQ67SW         16 INTL 20051117)
(XEN) ACPI: FACS 9EBDBF80, 0040
(XEN) ACPI: APIC 9E85DCB8, 0072 (r3 INTEL  DQ67SW    1072009 AMI     10013)
(XEN) ACPI: TCPA 9E85DD30, 0032 (r2 INTEL  DQ67SW          1 MSFT  1000013)
(XEN) ACPI: SSDT 9E85DD68, 0102 (r1 INTEL  DQ67SW          1 MSFT  3000001)
(XEN) ACPI: MCFG 9E85DE70, 003C (r1 INTEL  DQ67SW    1072009 MSFT       97)
(XEN) ACPI: HPET 9E85DEB0, 0038 (r1 INTEL  DQ67SW    1072009 AMI.        4)
(XEN) ACPI: ASF! 9E85DEE8, 00A0 (r32 INTEL  DQ67SW          1 TFSM    F4240)
(XEN) ACPI: DMAR 9E85DF88, 00E8 (r1 INTEL  DQ67SW          1 INTL        1)
(XEN) System RAM: 15819MB (16199164kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000043e600000
(XEN) Domain heap initialised
(XEN) Allocated console ring of 1048576 KiB.
(XEN) found SMP MP-table at 000fda50
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 9ebdbf80/0000000000000000, using 32
(XEN) ACPI:             wakeup_vec[9ebdbf8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 6:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:809: Host address width 36
(XEN) [VT-D]dmar.c:823: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:485:   dmaru->address = fed90000
(XEN) [VT-D]iommu.c:1155: drhd->address = fed90000 iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:1157: cap = c0000020e60262 ecap = f0101a
(XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:823: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:485:   dmaru->address = fed91000
(XEN) [VT-D]iommu.c:1155: drhd->address = fed91000 iommu->reg = ffff82c000203000
(XEN) [VT-D]iommu.c:1157: cap = c9008020660262 ecap = f0105a
(XEN) [VT-D]dmar.c:410:  IOAPIC: 0000:f0:1f.0
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.0
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.1
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.2
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.3
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.4
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.5
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.6
(XEN) [VT-D]dmar.c:374:  MSI HPET: 0000:f0:0f.7
(XEN) [VT-D]dmar.c:499:   flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:828: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:1d.0
(XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:1a.0
(XEN) [VT-D]dmar.c:694:   RMRR region: base_addr 9ebad000 end_address 9ebbbfff
(XEN) [VT-D]dmar.c:828: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:396:  endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:694:   RMRR region: base_addr 9f800000 end_address bf9fffff
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) mce_intel.c:735: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3292.602 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802eb1b0 -> ffff82d0802ec3f8
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - 3f
(XEN) PCI: Not using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN)  - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... works.
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) microcode: CPU0 updated from revision 0x28 to 0x29, date = 2013-06-12 
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2a
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN)  - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) microcode: CPU1 updated from revision 0x28 to 0x29, date = 2013-06-12 
(XEN) microcode: CPU2 updated from revision 0x28 to 0x29, date = 2013-06-12 
(XEN) Brought up 4 CPUs
(XEN) microcode: CPU3 updated from revision 0x28 to 0x29, date = 2013-06-12 
(XEN) tmem: initialized comp=1 dedup=1 tze=0
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 216 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0xb68000
(XEN) elf_parse_binary: phdr: paddr=0x1c00000 memsz=0x12b000
(XEN) elf_parse_binary: phdr: paddr=0x1d2b000 memsz=0x18658
(XEN) elf_parse_binary: phdr: paddr=0x1d44000 memsz=0x35c000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x20a0000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: INIT_P2M = 0x8000000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81d441f0
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb|writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: SUPPORTED_FEATURES = 0x90d
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: MOD_START_PFN = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0x0
(XEN)     virt_offset      = 0xffffffff80000000
(XEN)     virt_kstart      = 0xffffffff81000000
(XEN)     virt_kend        = 0xffffffff820a0000
(XEN)     virt_entry       = 0xffffffff81d441f0
(XEN)     p2m_base         = 0x8000000000
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x20a0000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000428000000->000000042c000000 (488129 pages to be allocated)
(XEN)  Init. ramdisk: 00000004398c1000->000000043e5ff4ed
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff820a0000
(XEN)  Init. ramdisk: 0000000000000000->0000000000000000
(XEN)  Phys-Mach map: 0000008000000000->0000008000400000
(XEN)  Start info:    ffffffff820a0000->ffffffff820a04b4
(XEN)  Page tables:   ffffffff820a1000->ffffffff820b6000
(XEN)  Boot stack:    ffffffff820b6000->ffffffff820b7000
(XEN)  TOTAL:         ffffffff80000000->ffffffff82400000
(XEN)  ENTRY ADDRESS: ffffffff81d441f0
(XEN) Dom0 has maximum 1 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81b68000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81c00000 -> 0xffffffff81d2b000
(XEN) elf_load_binary: phdr 2 at 0xffffffff81d2b000 -> 0xffffffff81d43658
(XEN) elf_load_binary: phdr 3 at 0xffffffff81d44000 -> 0xffffffff81f36000
(XEN) [VT-D]iommu.c:1439: d0:Hostbridge: skip 0000:00:00.0 map
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:02.0
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:16.0
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:16.2
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:16.3
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:19.0
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:1a.0
(XEN) [VT-D]iommu.c:1453: d0:PCIe: map 0000:00:1b.0
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:1d.0
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:1f.0
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:1f.2
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:00:1f.3
(XEN) [VT-D]iommu.c:1453: d0:PCIe: map 0000:04:00.0
(XEN) [VT-D]iommu.c:1453: d0:PCIe: map 0000:05:00.0
(XEN) [VT-D]iommu.c:1453: d0:PCIe: map 0000:06:00.0
(XEN) [VT-D]iommu.c:1453: d0:PCIe: map 0000:07:00.0
(XEN) [VT-D]iommu.c:1465: d0:PCI: map 0000:08:03.0
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000203000
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) ..................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1... 
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 300kB init memory.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 00000000c0000081 from 0xe023e00800000000 to 0x0023001000000000.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 00000000c0000082 from 0xffff82d0bffff000 to 0xffffffff817b5050.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 00000000c0000083 from 0xffff82d0bffff020 to 0xffffffff817b79d0.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 0000000000000174 from 0x000000000000e008 to 0x0000000000000010.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 0000000000000175 from 0xffff83009e6f7fc0 to 0x0000000000000000.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 0000000000000176 from 0xffff82d080239ad0 to 0xffffffff817b7790.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 00000000c0000084 from 0x0000000000074700 to 0x0000000000047700.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 00000000000001c9 from 0x0000000000000000 to 0x0000000000000003.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 00000000000001a6 from 0x0000000000000000 to 0x00000000000001ff.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 00000000000001a7 from 0x0000000000000000 to 0x00000000000001ff.
(XEN) traps.c:2686:d0v0 Domain attempted WRMSR 00000000000003f6 from 0x000000000000ffff to 0x000000000000fe00.
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:16.0
(XEN) PCI add device 0000:00:16.2
(XEN) PCI add device 0000:00:16.3
(XEN) PCI add device 0000:00:19.0
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1b.0
(XEN) PCI add device 0000:00:1c.0
(XEN) PCI add device 0000:00:1c.4
(XEN) PCI add device 0000:00:1c.6
(XEN) PCI add device 0000:00:1d.0
(XEN) PCI add device 0000:00:1e.0
(XEN) PCI add device 0000:00:1f.0
(XEN) PCI add device 0000:00:1f.2
(XEN) PCI add device 0000:00:1f.3
(XEN) PCI add device 0000:02:00.0
(XEN) PCI add device 0000:03:01.0
(XEN) PCI add device 0000:03:02.0
(XEN) PCI add device 0000:04:00.0
(XEN) PCI add device 0000:05:00.0
(XEN) PCI add device 0000:06:00.0
(XEN) PCI add device 0000:07:00.0
(XEN) PCI add device 0000:08:03.0
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) traps.c:3292: GPF (0000): ffff82d080199af4 -> ffff82d08023db6c
(XEN) d0: Forcing read-only access to MFN fed00
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 48c1490000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff8304303f7640 dev 0000:00:02.0 gmfn 48c1490
(XEN)     root_entry = ffff820040005000
(XEN)     root_entry[0] = 33133b001
(XEN)     context = ffff820040007000
(XEN)     context[10] = 1_333540001
(XEN)     l3 = ffff82004000a000
(XEN)     l3_index = 123
(XEN)     l3[123] = 0
(XEN)     l3[123] not present
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 48c1490000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff8304303f7640 dev 0000:00:02.0 gmfn 48c1490
(XEN)     root_entry = ffff82004000c000
(XEN)     root_entry[0] = 33133b001
(XEN)     context = ffff82004000e000
(XEN)     context[10] = 1_333540001
(XEN)     l3 = ffff820040000000
(XEN)     l3_index = 123
(XEN)     l3[123] = 0
(XEN)     l3[123] not present
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 48c1490000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff8304303f7640 dev 0000:00:02.0 gmfn 48c1490
(XEN)     root_entry = ffff82004000c000
(XEN)     root_entry[0] = 33133b001
(XEN)     context = ffff82004000e000
(XEN)     context[10] = 1_333540001
(XEN)     l3 = ffff820040000000
(XEN)     l3_index = 123
(XEN)     l3[123] = 0
(XEN)     l3[123] not present
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 48c1490000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff8304303f7640 dev 0000:00:02.0 gmfn 48c1490
(XEN)     root_entry = ffff82004000c000
(XEN)     root_entry[0] = 33133b001
(XEN)     context = ffff82004000e000
(XEN)     context[10] = 1_333540001
(XEN)     l3 = ffff820040000000
(XEN)     l3_index = 123
(XEN)     l3[123] = 0
(XEN)     l3[123] not present
(XEN) [VT-D]iommu.c:873: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:875: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr 48c1490000, iommu reg = ffff82c000201000
(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
(XEN) print_vtd_entries: iommu ffff8304303f7640 dev 0000:00:02.0 gmfn 48c1490
(XEN)     root_entry = ffff820040008000
(XEN)     root_entry[0] = 33133b001
(XEN)     context = ffff82004000c000
(XEN)     context[10] = 1_333540001
(XEN)     l3 = ffff82004000e000
(XEN)     l3_index = 123
(XEN)     l3[123] = 0
(XEN)     l3[123] not present

[-- Attachment #6: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: VT-d faults with Integrated Intel graphics on 4.6

[Wu, Feng]

> -----Original Message-----
> From: xen-devel-bounces@lists.xen.org [mailto:xen-devel-
> bounces@lists.xen.org] On Behalf Of Konrad Rzeszutek Wilk
> Sent: Wednesday, December 2, 2015 12:16 AM
> To: Tian, Kevin <kevin.tian@intel.com>; Wu, Feng <feng.wu@intel.com>
> Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>; Xen-devel <xen-
> devel@lists.xen.org>; Tamas K Lengyel <tamas.k.lengyel@gmail.com>
> Subject: Re: [Xen-devel] VT-d faults with Integrated Intel graphics on 4.6
> 
> On Thu, Aug 27, 2015 at 07:03:56AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Thu, Aug 27, 2015 at 11:06:30AM +0800, Chen, Tiejun wrote:
> > > On 8/25/2015 10:43 PM, Konrad Rzeszutek Wilk wrote:
> > > >On Tue, Aug 25, 2015 at 02:55:31PM +0800, Chen, Tiejun wrote:
> > > >>On 8/25/2015 8:19 AM, Tamas K Lengyel wrote:
> > > >>>Hi everyone,
> > > >>>I saw some people passingly mention this on the list before but just
> in
> > > >>>case it has been missed, my serial is also being spammed with the
> following
> > > >>>printouts with both Xen 4.6 RC1 and the latest staging build:
> > > >>>
> > > >>>...
> > > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault
> addr
> > > >>>33487d7000, iommu reg = ffff82c000201000
> > > >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault
> addr
> > > >>>33487d7000, iommu reg = ffff82c000201000
> > > >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault
> addr
> > > >>>33487d7000, iommu reg = ffff82c000201000
> > > >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault
> addr
> > > >>>33487d7000, iommu reg = ffff82c000201000
> > > >>>(XEN) [VT-D]DMAR: reason 06 - PTE Read access is not set
> > > >>>(XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault
> addr
> > > >>>2610742000, iommu reg = ffff82c000201000
> > > >>>(XEN) [VT-D]DMAR: reason 07 - Next page table ptr is invalid
> > > >>>...
> > > >>>
> > > >>
> > > >>What's your platform? BDW? And how much memory is set to your
> guest OS?
> > > >
> > > >Is see this as well. But oddly enough - only when I use the AMT feature
> > > >(normally I just use serial console on the machine).
> > > >
> > > >The platform is             /DQ67SW, BIOS
> > > >SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
> > > >
> > > >There is no guest OS - this is initial domain. And I boot with 2GB:
> > > >  Released 0 page(s)
> > > >
> > > >Xen: [mem 0x0000000000000000-0x0000000000099fff] usable
> > > >Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved
> > > >Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
> > > >Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
> > > >Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
> > > >Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
> > > >Xen: [mem 0x0000000040200000-0x0000000080465fff] usable
> > > >Xen: [mem 0x0000000080466000-0x000000009e855fff] unusable
> > > >Xen: [mem 0x000000009e856000-0x000000009e85efff] ACPI data
> > > >Xen: [mem 0x000000009e85f000-0x000000009e8a9fff] ACPI NVS
> > > >Xen: [mem 0x000000009e8aa000-0x000000009e8b1fff] unusable
> > > >Xen: [mem 0x000000009e8b2000-0x000000009e9a4fff] reserved
> > > >Xen: [mem 0x000000009e9a5000-0x000000009e9a6fff] unusable
> > > >Xen: [mem 0x000000009e9a7000-0x000000009ebc5fff] reserved
> > > >Xen: [mem 0x000000009ebc6000-0x000000009ebc6fff] unusable
> > > >Xen: [mem 0x000000009ebc7000-0x000000009ebd6fff] reserved
> > > >Xen: [mem 0x000000009ebd7000-0x000000009ebf4fff] ACPI NVS
> > > >Xen: [mem 0x000000009ebf5000-0x000000009ec18fff] reserved
> > > >Xen: [mem 0x000000009ec19000-0x000000009ec5bfff] ACPI NVS
> > > >Xen: [mem 0x000000009ec5c000-0x000000009ee7bfff] reserved
> > > >Xen: [mem 0x000000009ee7c000-0x000000009effffff] unusable
> > > >Xen: [mem 0x000000009f800000-0x00000000bf9fffff] reserved
> > > >Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> > > >Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
> > > >Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
> > > >Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> > > >Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> > > >Xen: [mem 0x0000000100000000-0x000000043e5fffff] unusable
> > > >
> > > >>
> > > >>Just at first glance to fault address, this seems be issued from some
> > >
> > > As you see those fault addresses are out of the normal memory range
> here.
> > >
> > > >>known erratas on BDS and SKL.
> > > >
> > > >I am runnig v4.2-rc8.
> > >
> > > So I really doubt this is related to some erratas. Currently the pre-fetch
> > > unit of IOMMU unit dedicated to IGD can't work well on some platforms,
> so
> > > you can see these wired faults.
> >
> > Do you have some ideas for a solution/patch?
> 
> ping?
> 
> Should I use some work-around flags? There does not seem to be any
> corruption on the AMT screen - just that the 'xl dmesg' is packed with
> VT-d faults.
> 
> Attaching the lspci, dmesg, xl dmesg, from the latest Xen.
> 

Tiejun left Intel, adding Shuai here who may help.

Thanks,
Feng

> >
> > Thanks!