Re: [RFC bluetooth-next 00/21] mrf24j40: async rx/tx handling and new features

[Stefan Schmidt <stefan@osg.samsung.com>]

Hello.

On 13/08/15 14:22, Alexander Aring wrote:
> Hi,
>
> this patch series contains some cleanups, devicetree support, rx/tx async
> handling, threaded irq to hardirq, csma params settings, cca mode settings,
> cca energy detection levels, tx power settings and promiscuous mode settings.
>
> Also I add regmap support, the lowlevel spi calls are only used in hotpaths
> for handling receive/transmit and irq handling. There are also some many
> magic numbers, maybe we can introduce some register bits defines.
>
> First I will send this as RFC to get some respone if the patches looks fine
> and acceptable for mainline.

I waited for Alan to give some comments first here but he seems rather 
busy these days.

I struggled a while to hook up my mrf24j40ma module to a Pi B+ but it 
works now and I have been testing this patchset with it. Nothing 
problematic showed up and especially the updates for newer stack 
features are good to see for in-tree drivers.

You can have my

Tested-by: Stefan Schmidt <stefan@osg.samsung.com>

for the whole patchset. Review tags will individually while I go through it.

regards
Stefan Schmidt