* Help - new to Yocto
@ 2015-08-27 0:50 Terry Farnham
2015-08-27 11:46 ` Daiane Angolini
0 siblings, 1 reply; 7+ messages in thread
From: Terry Farnham @ 2015-08-27 0:50 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 5754 bytes --]
Hello,
Disclaimer: I am totally new to Yocto as well as Linux development. So
please bear with my ignorance.
I am attempting to build from scratch a generic kernel image for the
imx6qsabresd. I have followed a number of steps in getting setup to build
properly. However after executing the final two steps:
> MACHINE=imx6qsabresd source fsl-setup-release.sh -b build -e fb
> bitbake fsl-image-gui
I am getting a single compile error which I include after my signature. The
most pertinent information, however, seems to be the warning where it
indicates that it is unsafe to use the "/usr/include" include location.
This does indeed seem bad since I am on an x86 machine compiling for arm. I
am, however, totally oblivious as to why it would be looking in /usr/include
for any include files. Please Help, as I am clueless and I really need to
figure out the basic build process before I move forward on more advanced
setups.
Thanks,
Terry Farnham
| cc1: warning: include location "/usr/include" is unsafe for
cross-compilation [-Wpoison-system-directories]
| In file included from /usr/include/bits/byteswap.h:35:0,
| from /usr/include/endian.h:60,
| from /usr/include/bits/waitstatus.h:64,
| from /usr/include/stdlib.h:42,
| from
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/ptpd.h:40,
| from
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:54:
|
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c: In function 'initData':
| /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
operand for code 'w'
| __asm__ ("rorw $8, %w0" \
| ^
| /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
| # define htons(x) __bswap_16 (x)
| ^
|
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:83:21: note: in
expansion of macro 'htons'
| uint16_t pid = htons(getpid());
| ^
| {standard input}: Assembler messages:
| {standard input}:397: Error: bad instruction `rorw $8,'
| make[2]: *** [bmc.o] Error 1
| make[2]: *** Waiting for unfinished jobs....
| In file included from /usr/include/bits/byteswap.h:35:0,
| from /usr/include/endian.h:60,
| from /usr/include/bits/waitstatus.h:64,
| from /usr/include/stdlib.h:42,
| from
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../ptpd.h:40,
| from
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:54:
|
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c: In function
'packEnumeration16':
| /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
operand for code 'w'
| __asm__ ("rorw $8, %w0" \
| ^
| /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
| # define htons(x) __bswap_16 (x)
| ^
|
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../dep/ptpd_dep.h:120:19:
note: in expansion of macro 'htons'
| #define flip16(x) htons(x)
| ^
|
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:71:16: note: in
expansion of macro 'flip16'
| *(type *)to = flip##size( *(type *)from ); \
| ^
|
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:107:1: note: in
expansion of macro 'PACK_ENDIAN'
| PACK_ENDIAN( Enumeration16, 16 )
| ^
| {standard input}: Assembler messages:
| {standard input}:235: Error: bad instruction `rorw $8,'
| make[2]: *** [dep/msg.o] Error 1
| make[2]: Leaving directory
`/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linu
x-gnueabi/ptpd/2.3.1-rc2-r0/build/src'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory
`/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linu
x-gnueabi/ptpd/2.3.1-rc2-r0/build'
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at
/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux
-gnueabi/ptpd/2.3.1-rc2-r0/temp/log.do_compile.29823)
ERROR: Task 1658
(/home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-networking/re
cipes-daemons/ptpd/ptpd_2.3.1-rc2.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2447 tasks of which 2444 didn't need to be
rerun and 1 failed.
Waiting for 0 running tasks to finish:
Summary: 1 task failed:
/home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-networking/rec
ipes-daemons/ptpd/ptpd_2.3.1-rc2.bb, do_compile
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
[-- Attachment #2: Type: text/html, Size: 20256 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Help - new to Yocto
2015-08-27 0:50 Help - new to Yocto Terry Farnham
@ 2015-08-27 11:46 ` Daiane Angolini
2015-08-27 13:21 ` Terry Farnham
0 siblings, 1 reply; 7+ messages in thread
From: Daiane Angolini @ 2015-08-27 11:46 UTC (permalink / raw)
To: Terry Farnham; +Cc: meta-freescale@yoctoproject.org
On Wed, Aug 26, 2015 at 9:50 PM, Terry Farnham
<terry.farnham@quanergy.com> wrote:
> Hello,
>
>
>
> Disclaimer: I am totally new to Yocto as well as Linux development. So
> please bear with my ignorance.
There are two important things you must know before anything else:
1 - http://freescale.github.io/doc/release-notes/1.8/
2- when reporting error on Freescale Release, it's absolutely
important to know the release version name/number
This error may be already fixed upstream, you can try to upgrade the
original layer.
Daiane
>
>
>
> I am attempting to build from scratch a generic kernel image for the
> imx6qsabresd. I have followed a number of steps in getting setup to build
> properly. However after executing the final two steps:
>
>> MACHINE=imx6qsabresd source fsl-setup-release.sh –b build –e fb
>
>> bitbake fsl-image-gui
>
>
>
> I am getting a single compile error which I include after my signature. The
> most pertinent information, however, seems to be the warning where it
> indicates that it is unsafe to use the “/usr/include” include location.
> This does indeed seem bad since I am on an x86 machine compiling for arm. I
> am, however, totally oblivious as to why it would be looking in /usr/include
> for any include files. Please Help, as I am clueless and I really need to
> figure out the basic build process before I move forward on more advanced
> setups.
>
>
>
> Thanks,
>
>
>
> Terry Farnham
>
>
>
>
>
>
>
>
>
> | cc1: warning: include location "/usr/include" is unsafe for
> cross-compilation [-Wpoison-system-directories]
>
> | In file included from /usr/include/bits/byteswap.h:35:0,
>
> | from /usr/include/endian.h:60,
>
> | from /usr/include/bits/waitstatus.h:64,
>
> | from /usr/include/stdlib.h:42,
>
> | from
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/ptpd.h:40,
>
> | from
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:54:
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:
> In function 'initData':
>
> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
> operand for code 'w'
>
> | __asm__ ("rorw $8, %w0" \
>
> | ^
>
> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>
> | # define htons(x) __bswap_16 (x)
>
> | ^
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:83:21:
> note: in expansion of macro 'htons'
>
> | uint16_t pid = htons(getpid());
>
> | ^
>
> | {standard input}: Assembler messages:
>
> | {standard input}:397: Error: bad instruction `rorw $8,'
>
> | make[2]: *** [bmc.o] Error 1
>
> | make[2]: *** Waiting for unfinished jobs....
>
> | In file included from /usr/include/bits/byteswap.h:35:0,
>
> | from /usr/include/endian.h:60,
>
> | from /usr/include/bits/waitstatus.h:64,
>
> | from /usr/include/stdlib.h:42,
>
> | from
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../ptpd.h:40,
>
> | from
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:54:
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:
> In function 'packEnumeration16':
>
> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
> operand for code 'w'
>
> | __asm__ ("rorw $8, %w0" \
>
> | ^
>
> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>
> | # define htons(x) __bswap_16 (x)
>
> | ^
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../dep/ptpd_dep.h:120:19:
> note: in expansion of macro 'htons'
>
> | #define flip16(x) htons(x)
>
> | ^
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:71:16:
> note: in expansion of macro 'flip16'
>
> | *(type *)to = flip##size( *(type *)from ); \
>
> | ^
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:107:1:
> note: in expansion of macro 'PACK_ENDIAN'
>
> | PACK_ENDIAN( Enumeration16, 16 )
>
> | ^
>
> | {standard input}: Assembler messages:
>
> | {standard input}:235: Error: bad instruction `rorw $8,'
>
> | make[2]: *** [dep/msg.o] Error 1
>
> | make[2]: Leaving directory
> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build/src'
>
> | make[1]: *** [all-recursive] Error 1
>
> | make[1]: Leaving directory
> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build'
>
> | make: *** [all] Error 2
>
> | ERROR: oe_runmake failed
>
> | WARNING: exit code 1 from a shell command.
>
> | ERROR: Function failed: do_compile (log file is located at
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/temp/log.do_compile.29823)
>
> ERROR: Task 1658
> (/home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-networking/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
> do_compile) failed with exit code '1'
>
> NOTE: Tasks Summary: Attempted 2447 tasks of which 2444 didn't need to be
> rerun and 1 failed.
>
> Waiting for 0 running tasks to finish:
>
>
>
> Summary: 1 task failed:
>
>
> /home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-networking/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
> do_compile
>
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
>
>
>
>
>
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Help - new to Yocto
2015-08-27 11:46 ` Daiane Angolini
@ 2015-08-27 13:21 ` Terry Farnham
2015-08-27 16:15 ` Daiane Angolini
0 siblings, 1 reply; 7+ messages in thread
From: Terry Farnham @ 2015-08-27 13:21 UTC (permalink / raw)
To: 'Daiane Angolini'; +Cc: meta-freescale
Thank you Daiane,
I am assuming that the version name/number you are referring to is actually the name of the branch manifest that I pulled from using repo? I am using imx-3.14.28-1.0.0_ga.
Thank you for your time.
Terry
-----Original Message-----
From: angolini@gmail.com [mailto:angolini@gmail.com] On Behalf Of Daiane Angolini
Sent: Thursday, August 27, 2015 4:46 AM
To: Terry Farnham
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] Help - new to Yocto
On Wed, Aug 26, 2015 at 9:50 PM, Terry Farnham <terry.farnham@quanergy.com> wrote:
> Hello,
>
>
>
> Disclaimer: I am totally new to Yocto as well as Linux development.
> So please bear with my ignorance.
There are two important things you must know before anything else:
1 - http://freescale.github.io/doc/release-notes/1.8/
2- when reporting error on Freescale Release, it's absolutely important to know the release version name/number
This error may be already fixed upstream, you can try to upgrade the original layer.
Daiane
>
>
>
> I am attempting to build from scratch a generic kernel image for the
> imx6qsabresd. I have followed a number of steps in getting setup to
> build properly. However after executing the final two steps:
>
>> MACHINE=imx6qsabresd source fsl-setup-release.sh –b build –e fb
>
>> bitbake fsl-image-gui
>
>
>
> I am getting a single compile error which I include after my
> signature. The most pertinent information, however, seems to be the
> warning where it indicates that it is unsafe to use the “/usr/include” include location.
> This does indeed seem bad since I am on an x86 machine compiling for
> arm. I am, however, totally oblivious as to why it would be looking
> in /usr/include for any include files. Please Help, as I am clueless
> and I really need to figure out the basic build process before I move
> forward on more advanced setups.
>
>
>
> Thanks,
>
>
>
> Terry Farnham
>
>
>
>
>
>
>
>
>
> | cc1: warning: include location "/usr/include" is unsafe for
> cross-compilation [-Wpoison-system-directories]
>
> | In file included from /usr/include/bits/byteswap.h:35:0,
>
> | from /usr/include/endian.h:60,
>
> | from /usr/include/bits/waitstatus.h:64,
>
> | from /usr/include/stdlib.h:42,
>
> | from
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky
> -linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/ptpd.h:40,
>
> | from
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:54:
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:
> In function 'initData':
>
> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
> operand for code 'w'
>
> | __asm__ ("rorw $8, %w0" \
>
> | ^
>
> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>
> | # define htons(x) __bswap_16 (x)
>
> | ^
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:83:21:
> note: in expansion of macro 'htons'
>
> | uint16_t pid = htons(getpid());
>
> | ^
>
> | {standard input}: Assembler messages:
>
> | {standard input}:397: Error: bad instruction `rorw $8,'
>
> | make[2]: *** [bmc.o] Error 1
>
> | make[2]: *** Waiting for unfinished jobs....
>
> | In file included from /usr/include/bits/byteswap.h:35:0,
>
> | from /usr/include/endian.h:60,
>
> | from /usr/include/bits/waitstatus.h:64,
>
> | from /usr/include/stdlib.h:42,
>
> | from
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky
> -linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../ptpd.h:40,
>
> | from
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:54:
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:
> In function 'packEnumeration16':
>
> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
> operand for code 'w'
>
> | __asm__ ("rorw $8, %w0" \
>
> | ^
>
> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>
> | # define htons(x) __bswap_16 (x)
>
> | ^
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../dep/ptpd_dep.h:120:19:
> note: in expansion of macro 'htons'
>
> | #define flip16(x) htons(x)
>
> | ^
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:71:16:
> note: in expansion of macro 'flip16'
>
> | *(type *)to = flip##size( *(type *)from ); \
>
> | ^
>
> |
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:107:1:
> note: in expansion of macro 'PACK_ENDIAN'
>
> | PACK_ENDIAN( Enumeration16, 16 )
>
> | ^
>
> | {standard input}: Assembler messages:
>
> | {standard input}:235: Error: bad instruction `rorw $8,'
>
> | make[2]: *** [dep/msg.o] Error 1
>
> | make[2]: Leaving directory
> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build/src'
>
> | make[1]: *** [all-recursive] Error 1
>
> | make[1]: Leaving directory
> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build'
>
> | make: *** [all] Error 2
>
> | ERROR: oe_runmake failed
>
> | WARNING: exit code 1 from a shell command.
>
> | ERROR: Function failed: do_compile (log file is located at
> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky
> -linux-gnueabi/ptpd/2.3.1-rc2-r0/temp/log.do_compile.29823)
>
> ERROR: Task 1658
> (/home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-network
> ing/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
> do_compile) failed with exit code '1'
>
> NOTE: Tasks Summary: Attempted 2447 tasks of which 2444 didn't need to
> be rerun and 1 failed.
>
> Waiting for 0 running tasks to finish:
>
>
>
> Summary: 1 task failed:
>
>
> /home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-networki
> ng/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
> do_compile
>
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
>
>
>
>
>
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Help - new to Yocto
2015-08-27 13:21 ` Terry Farnham
@ 2015-08-27 16:15 ` Daiane Angolini
2015-08-28 5:29 ` Terry Farnham
0 siblings, 1 reply; 7+ messages in thread
From: Daiane Angolini @ 2015-08-27 16:15 UTC (permalink / raw)
To: Terry Farnham; +Cc: meta-freescale@yoctoproject.org
On Thu, Aug 27, 2015 at 10:21 AM, Terry Farnham
<terry.farnham@quanergy.com> wrote:
> Thank you Daiane,
>
> I am assuming that the version name/number you are referring to is actually the name of the branch manifest that I pulled from using repo? I am using imx-3.14.28-1.0.0_ga.
>
Yes
Daiane
> Thank you for your time.
>
> Terry
>
> -----Original Message-----
> From: angolini@gmail.com [mailto:angolini@gmail.com] On Behalf Of Daiane Angolini
> Sent: Thursday, August 27, 2015 4:46 AM
> To: Terry Farnham
> Cc: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] Help - new to Yocto
>
> On Wed, Aug 26, 2015 at 9:50 PM, Terry Farnham <terry.farnham@quanergy.com> wrote:
>> Hello,
>>
>>
>>
>> Disclaimer: I am totally new to Yocto as well as Linux development.
>> So please bear with my ignorance.
>
> There are two important things you must know before anything else:
>
> 1 - http://freescale.github.io/doc/release-notes/1.8/
> 2- when reporting error on Freescale Release, it's absolutely important to know the release version name/number
>
> This error may be already fixed upstream, you can try to upgrade the original layer.
>
> Daiane
>
>>
>>
>>
>> I am attempting to build from scratch a generic kernel image for the
>> imx6qsabresd. I have followed a number of steps in getting setup to
>> build properly. However after executing the final two steps:
>>
>>> MACHINE=imx6qsabresd source fsl-setup-release.sh –b build –e fb
>>
>>> bitbake fsl-image-gui
>>
>>
>>
>> I am getting a single compile error which I include after my
>> signature. The most pertinent information, however, seems to be the
>> warning where it indicates that it is unsafe to use the “/usr/include” include location.
>> This does indeed seem bad since I am on an x86 machine compiling for
>> arm. I am, however, totally oblivious as to why it would be looking
>> in /usr/include for any include files. Please Help, as I am clueless
>> and I really need to figure out the basic build process before I move
>> forward on more advanced setups.
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Terry Farnham
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> | cc1: warning: include location "/usr/include" is unsafe for
>> cross-compilation [-Wpoison-system-directories]
>>
>> | In file included from /usr/include/bits/byteswap.h:35:0,
>>
>> | from /usr/include/endian.h:60,
>>
>> | from /usr/include/bits/waitstatus.h:64,
>>
>> | from /usr/include/stdlib.h:42,
>>
>> | from
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky
>> -linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/ptpd.h:40,
>>
>> | from
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:54:
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:
>> In function 'initData':
>>
>> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
>> operand for code 'w'
>>
>> | __asm__ ("rorw $8, %w0" \
>>
>> | ^
>>
>> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>>
>> | # define htons(x) __bswap_16 (x)
>>
>> | ^
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:83:21:
>> note: in expansion of macro 'htons'
>>
>> | uint16_t pid = htons(getpid());
>>
>> | ^
>>
>> | {standard input}: Assembler messages:
>>
>> | {standard input}:397: Error: bad instruction `rorw $8,'
>>
>> | make[2]: *** [bmc.o] Error 1
>>
>> | make[2]: *** Waiting for unfinished jobs....
>>
>> | In file included from /usr/include/bits/byteswap.h:35:0,
>>
>> | from /usr/include/endian.h:60,
>>
>> | from /usr/include/bits/waitstatus.h:64,
>>
>> | from /usr/include/stdlib.h:42,
>>
>> | from
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky
>> -linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../ptpd.h:40,
>>
>> | from
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:54:
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:
>> In function 'packEnumeration16':
>>
>> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
>> operand for code 'w'
>>
>> | __asm__ ("rorw $8, %w0" \
>>
>> | ^
>>
>> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>>
>> | # define htons(x) __bswap_16 (x)
>>
>> | ^
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../dep/ptpd_dep.h:120:19:
>> note: in expansion of macro 'htons'
>>
>> | #define flip16(x) htons(x)
>>
>> | ^
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:71:16:
>> note: in expansion of macro 'flip16'
>>
>> | *(type *)to = flip##size( *(type *)from ); \
>>
>> | ^
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:107:1:
>> note: in expansion of macro 'PACK_ENDIAN'
>>
>> | PACK_ENDIAN( Enumeration16, 16 )
>>
>> | ^
>>
>> | {standard input}: Assembler messages:
>>
>> | {standard input}:235: Error: bad instruction `rorw $8,'
>>
>> | make[2]: *** [dep/msg.o] Error 1
>>
>> | make[2]: Leaving directory
>> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build/src'
>>
>> | make[1]: *** [all-recursive] Error 1
>>
>> | make[1]: Leaving directory
>> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build'
>>
>> | make: *** [all] Error 2
>>
>> | ERROR: oe_runmake failed
>>
>> | WARNING: exit code 1 from a shell command.
>>
>> | ERROR: Function failed: do_compile (log file is located at
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky
>> -linux-gnueabi/ptpd/2.3.1-rc2-r0/temp/log.do_compile.29823)
>>
>> ERROR: Task 1658
>> (/home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-network
>> ing/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
>> do_compile) failed with exit code '1'
>>
>> NOTE: Tasks Summary: Attempted 2447 tasks of which 2444 didn't need to
>> be rerun and 1 failed.
>>
>> Waiting for 0 running tasks to finish:
>>
>>
>>
>> Summary: 1 task failed:
>>
>>
>> /home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-networki
>> ng/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
>> do_compile
>>
>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>
>>
>>
>>
>>
>>
>>
>>
>> --
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Help - new to Yocto
2015-08-27 16:15 ` Daiane Angolini
@ 2015-08-28 5:29 ` Terry Farnham
2015-08-28 10:00 ` Nikolay Dimitrov
2015-08-28 12:30 ` Daiane Angolini
0 siblings, 2 replies; 7+ messages in thread
From: Terry Farnham @ 2015-08-28 5:29 UTC (permalink / raw)
To: 'Daiane Angolini'; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 9099 bytes --]
I attempted a clean build today to see if I could get past this issue. I am still encountering the same compile problem.
I’m not exactly sure where I must be going wrong with the steps for setting up to build OE and the Yocto packages, but it always seems to fail to build the ptpd daemon. Looking at the Makefiles that are generated, it seems to me that the mechanics which sets up the compiler include directives are generating an include reference into the host machines /usr/include folder rather than into the proper arm version of the includes. I attached the Makefile from my "<build_folder>/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build" folder. You can see that the includedir seems to improperly reference /usr/include. The error that gets generated is a result of including from nested includes that eventually land on /usr/include/bits/byteswap.h which happens to have x86 specific assembler in it. I’m surprised that I am not seeing more compile errors than this, as I suspect that a lot of the code being compiled from the cortexa9hf-vfp-neon-poky-linux-gnueabi is referencing into the host machines /usr/include instead of the hardware specific version.
I'm hoping someone has a clue that will help me get past this problem.
Thanks,
Terry
-----Original Message-----
From: angolini@gmail.com [mailto:angolini@gmail.com] On Behalf Of Daiane Angolini
Sent: Thursday, August 27, 2015 9:15 AM
To: Terry Farnham
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] Help - new to Yocto
On Thu, Aug 27, 2015 at 10:21 AM, Terry Farnham <terry.farnham@quanergy.com> wrote:
> Thank you Daiane,
>
> I am assuming that the version name/number you are referring to is actually the name of the branch manifest that I pulled from using repo? I am using imx-3.14.28-1.0.0_ga.
>
Yes
Daiane
> Thank you for your time.
>
> Terry
>
> -----Original Message-----
> From: angolini@gmail.com [mailto:angolini@gmail.com] On Behalf Of
> Daiane Angolini
> Sent: Thursday, August 27, 2015 4:46 AM
> To: Terry Farnham
> Cc: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] Help - new to Yocto
>
> On Wed, Aug 26, 2015 at 9:50 PM, Terry Farnham <terry.farnham@quanergy.com> wrote:
>> Hello,
>>
>>
>>
>> Disclaimer: I am totally new to Yocto as well as Linux development.
>> So please bear with my ignorance.
>
> There are two important things you must know before anything else:
>
> 1 - http://freescale.github.io/doc/release-notes/1.8/
> 2- when reporting error on Freescale Release, it's absolutely
> important to know the release version name/number
>
> This error may be already fixed upstream, you can try to upgrade the original layer.
>
> Daiane
>
>>
>>
>>
>> I am attempting to build from scratch a generic kernel image for the
>> imx6qsabresd. I have followed a number of steps in getting setup to
>> build properly. However after executing the final two steps:
>>
>>> MACHINE=imx6qsabresd source fsl-setup-release.sh –b build –e fb
>>
>>> bitbake fsl-image-gui
>>
>>
>>
>> I am getting a single compile error which I include after my
>> signature. The most pertinent information, however, seems to be the
>> warning where it indicates that it is unsafe to use the “/usr/include” include location.
>> This does indeed seem bad since I am on an x86 machine compiling for
>> arm. I am, however, totally oblivious as to why it would be looking
>> in /usr/include for any include files. Please Help, as I am clueless
>> and I really need to figure out the basic build process before I move
>> forward on more advanced setups.
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Terry Farnham
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> | cc1: warning: include location "/usr/include" is unsafe for
>> cross-compilation [-Wpoison-system-directories]
>>
>> | In file included from /usr/include/bits/byteswap.h:35:0,
>>
>> | from /usr/include/endian.h:60,
>>
>> | from /usr/include/bits/waitstatus.h:64,
>>
>> | from /usr/include/stdlib.h:42,
>>
>> | from
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-pok
>> y -linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/ptpd.h:40,
>>
>> | from
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:54:
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:
>> In function 'initData':
>>
>> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
>> operand for code 'w'
>>
>> | __asm__ ("rorw $8, %w0" \
>>
>> | ^
>>
>> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>>
>> | # define htons(x) __bswap_16 (x)
>>
>> | ^
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:83:21:
>> note: in expansion of macro 'htons'
>>
>> | uint16_t pid = htons(getpid());
>>
>> | ^
>>
>> | {standard input}: Assembler messages:
>>
>> | {standard input}:397: Error: bad instruction `rorw $8,'
>>
>> | make[2]: *** [bmc.o] Error 1
>>
>> | make[2]: *** Waiting for unfinished jobs....
>>
>> | In file included from /usr/include/bits/byteswap.h:35:0,
>>
>> | from /usr/include/endian.h:60,
>>
>> | from /usr/include/bits/waitstatus.h:64,
>>
>> | from /usr/include/stdlib.h:42,
>>
>> | from
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-pok
>> y
>> -linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../ptpd.h:40,
>>
>> | from
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:54:
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:
>> In function 'packEnumeration16':
>>
>> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
>> operand for code 'w'
>>
>> | __asm__ ("rorw $8, %w0" \
>>
>> | ^
>>
>> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>>
>> | # define htons(x) __bswap_16 (x)
>>
>> | ^
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../dep/ptpd_dep.h:120:19:
>> note: in expansion of macro 'htons'
>>
>> | #define flip16(x) htons(x)
>>
>> | ^
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:71:16:
>> note: in expansion of macro 'flip16'
>>
>> | *(type *)to = flip##size( *(type *)from ); \
>>
>> | ^
>>
>> |
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:107:1:
>> note: in expansion of macro 'PACK_ENDIAN'
>>
>> | PACK_ENDIAN( Enumeration16, 16 )
>>
>> | ^
>>
>> | {standard input}: Assembler messages:
>>
>> | {standard input}:235: Error: bad instruction `rorw $8,'
>>
>> | make[2]: *** [dep/msg.o] Error 1
>>
>> | make[2]: Leaving directory
>> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build/src'
>>
>> | make[1]: *** [all-recursive] Error 1
>>
>> | make[1]: Leaving directory
>> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build'
>>
>> | make: *** [all] Error 2
>>
>> | ERROR: oe_runmake failed
>>
>> | WARNING: exit code 1 from a shell command.
>>
>> | ERROR: Function failed: do_compile (log file is located at
>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-pok
>> y
>> -linux-gnueabi/ptpd/2.3.1-rc2-r0/temp/log.do_compile.29823)
>>
>> ERROR: Task 1658
>> (/home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-networ
>> k ing/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
>> do_compile) failed with exit code '1'
>>
>> NOTE: Tasks Summary: Attempted 2447 tasks of which 2444 didn't need
>> to be rerun and 1 failed.
>>
>> Waiting for 0 running tasks to finish:
>>
>>
>>
>> Summary: 1 task failed:
>>
>>
>> /home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-network
>> i ng/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
>> do_compile
>>
>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>
>>
>>
>>
>>
>>
>>
>>
>> --
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>
>
[-- Attachment #2: Makefile --]
[-- Type: application/octet-stream, Size: 29098 bytes --]
# Makefile.in generated by automake 1.14.1 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
VPATH = /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/ptpd
pkgincludedir = $(includedir)/ptpd
pkglibdir = $(libdir)/ptpd
pkglibexecdir = $(libexecdir)/ptpd
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = arm-poky-linux-gnueabi
subdir = .
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in ChangeLog INSTALL README \
build-aux/compile build-aux/config.guess build-aux/config.sub \
build-aux/depcomp build-aux/install-sh build-aux/missing \
build-aux/ltmain.sh $(top_srcdir)/build-aux/compile \
$(top_srcdir)/build-aux/config.guess \
$(top_srcdir)/build-aux/config.sub \
$(top_srcdir)/build-aux/install-sh \
$(top_srcdir)/build-aux/ltmain.sh \
$(top_srcdir)/build-aux/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/version.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/build-aux/missing aclocal-1.14
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AR = arm-poky-linux-gnueabi-ar
AUTOCONF = ${SHELL} /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/build-aux/missing autoconf
AUTOHEADER = ${SHELL} /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/build-aux/missing autoheader
AUTOMAKE = ${SHELL} /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/build-aux/missing automake-1.14
AWK = gawk
CC = arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9 --sysroot=/home/tfarnham/Freescale/build/tmp/sysroots/imx6qsabresd
CCDEPMODE = depmode=none
CFLAGS = -O2 -pipe -g -feliminate-unused-debug-types
CPP = arm-poky-linux-gnueabi-gcc -E --sysroot=/home/tfarnham/Freescale/build/tmp/sysroots/imx6qsabresd -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9
CPPFLAGS =
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DSYMUTIL =
DUMPBIN =
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
FGREP = /bin/grep -F
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = arm-poky-linux-gnueabi-ld --sysroot=/home/tfarnham/Freescale/build/tmp/sysroots/imx6qsabresd
LDFLAGS = -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed
LIBOBJS =
LIBS = -lrt -lm
LIBTOOL = $(top_builddir)/arm-poky-linux-gnueabi-libtool
LINUX_KERNEL_INCLUDES =
LIPO =
LN_S = ln -s
LTLIBOBJS =
MAKEINFO = ${SHELL} /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/build-aux/missing makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
NM = arm-poky-linux-gnueabi-nm
NMEDIT =
OBJDUMP = arm-poky-linux-gnueabi-objdump
OBJEXT = o
OTOOL =
OTOOL64 =
PACKAGE = ptpd
PACKAGE_BUGREPORT = ptpd-bugs@nwtime.org
PACKAGE_NAME = ptpd
PACKAGE_STRING = ptpd 2.3.1-rc2
PACKAGE_TARNAME = ptpd
PACKAGE_URL = http://ptpd.sourceforge.net
PACKAGE_VERSION = 2.3.1-rc2
PATH_NET_SNMP_CONFIG =
PATH_PCAP_CONFIG = /usr/bin/pcap-config
PATH_SEPARATOR = :
PCAP_CFLAGS =
PCAP_CPPFLAGS = -I/usr/include
PCAP_LIBS = -L/usr/lib/x86_64-linux-gnu -lpcap
PTP_DAEMON =
PTP_DBL =
PTP_EXP =
PTP_NTPDC =
PTP_PCAP = -DPTPD_PCAP
PTP_SNMP =
PTP_STATISTICS =
RANLIB = arm-poky-linux-gnueabi-ranlib
RELEASE_DATE = August, 2014
SED = sed
SET_MAKE =
SHELL = /bin/bash
SNMP_CFLAGS =
SNMP_CPPFLAGS =
SNMP_LIBS =
STRIP = arm-poky-linux-gnueabi-strip
VERSION = 2.3.1-rc2
VERSION_NUMBER = 2.3.1-rc2
abs_builddir = /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build
abs_srcdir = /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2
abs_top_builddir = /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build
abs_top_srcdir = /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2
ac_ct_AR =
ac_ct_CC =
ac_ct_DUMPBIN =
am__include = include
am__leading_dot = .
am__quote =
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = /usr/bin
build = x86_64-pc-linux-gnu
build_alias = x86_64-linux
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
cutpath = /usr/bin/cut
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host = arm-poky-linux-gnueabi
host_alias = arm-poky-linux-gnueabi
host_cpu = arm
host_os = linux-gnueabi
host_vendor = poky
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = ${SHELL} /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/build-aux/install-sh
libdir = /usr/lib
libexecdir = /usr/lib/ptpd
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/share/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = /usr/sbin
sharedstatedir = /com
srcdir = /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2
svnverpath = /home/tfarnham/Freescale/build/tmp/sysroots/x86_64-linux/usr/bin/svnversion
sysconfdir = /etc
target_alias = arm-poky-linux-gnueabi
top_build_prefix =
top_builddir = .
top_srcdir = /home/tfarnham/Freescale/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2
trpath = /usr/bin/tr
ACLOCAL_AMFLAGS = -I m4
NULL =
SUBDIRS = \
src \
$(NULL)
EXTRA_DIST = \
ChangeLog \
README \
\
doc \
tools \
test \
packagebuild \
src/ptpd2.conf.minimal\
src/ptpd2.8\
src/ptpd2.conf.5\
\
$(NULL)
CLEANFILES =
#DISTCLEANFILES = .gcc-warning
BUILT_SOURCES = \
libtool \
$(NULL)
all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) all check install install-am \
install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
dist-xz dist-zip distcheck distclean distclean-generic \
distclean-hdr distclean-libtool distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am html html-am info \
info-am install install-am install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
#dist-hook:
# @find $(distdir) -type d -name SCCS -print | xargs rm -rf
libtool: $(LIBTOOL_DEPS)
./config.status --recheck
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Help - new to Yocto
2015-08-28 5:29 ` Terry Farnham
@ 2015-08-28 10:00 ` Nikolay Dimitrov
2015-08-28 12:30 ` Daiane Angolini
1 sibling, 0 replies; 7+ messages in thread
From: Nikolay Dimitrov @ 2015-08-28 10:00 UTC (permalink / raw)
To: Terry Farnham; +Cc: meta-freescale
Hi Terry,
On 08/28/2015 08:29 AM, Terry Farnham wrote:
> I attempted a clean build today to see if I could get past this
> issue. I am still encountering the same compile problem.
>
> I’m not exactly sure where I must be going wrong with the steps for
> setting up to build OE and the Yocto packages, but it always seems to
> fail to build the ptpd daemon. Looking at the Makefiles that are
> generated, it seems to me that the mechanics which sets up the
> compiler include directives are generating an include reference into
> the host machines /usr/include folder rather than into the proper arm
> version of the includes. I attached the Makefile from my
> "<build_folder>/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build"
> folder. You can see that the includedir seems to improperly
> reference /usr/include. The error that gets generated is a result of
> including from nested includes that eventually land on
> /usr/include/bits/byteswap.h which happens to have x86 specific
> assembler in it. I’m surprised that I am not seeing more compile
> errors than this, as I suspect that a lot of the code being compiled
> from the cortexa9hf-vfp-neon-poky-linux-gnueabi is referencing into
> the host machines /usr/include instead of the hardware specific
> version.
>
> I'm hoping someone has a clue that will help me get past this
> problem.
>
> Thanks,
>
> Terry
Just tried to build ptpd on a Debian 7 host and it works like a charm.
Here's what I'm doing:
// Get Yocto
mkdir ~/yocto-master
cd ~/yocto-master
repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b fido
repo sync
. setup-environment build
// Change PACKAGE_CLASSES to package_ipk to avoid waiting for RPMs
nano conf/local.conf
// Add meta-networking and meta-python to BBLAYERS
nano conf/bblayers.conf
// Default MACHINE is imx6qsabresd, so no need to set it explicitly
bitbake ptpd
This worked on both master and fido branches.
Regards,
Nikolay
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Help - new to Yocto
2015-08-28 5:29 ` Terry Farnham
2015-08-28 10:00 ` Nikolay Dimitrov
@ 2015-08-28 12:30 ` Daiane Angolini
1 sibling, 0 replies; 7+ messages in thread
From: Daiane Angolini @ 2015-08-28 12:30 UTC (permalink / raw)
To: Terry Farnham; +Cc: meta-freescale@yoctoproject.org
On Fri, Aug 28, 2015 at 2:29 AM, Terry Farnham
<terry.farnham@quanergy.com> wrote:
> I attempted a clean build today to see if I could get past this issue. I am still encountering the same compile problem.
>
> I’m not exactly sure where I must be going wrong with the steps for setting up to build OE and the Yocto packages, but it always seems to fail to build the ptpd daemon. Looking at the Makefiles that are generated, it seems to me that the mechanics which sets up the compiler include directives are generating an include reference into the host machines /usr/include folder rather than into the proper arm version of the includes. I attached the Makefile from my "<build_folder>/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build" folder. You can see that the includedir seems to improperly reference /usr/include. The error that gets generated is a result of including from nested includes that eventually land on /usr/include/bits/byteswap.h which happens to have x86 specific assembler in it. I’m surprised that I am not seeing more compile errors than this, as I suspect that a lot of the code being compiled from the cortexa9hf-vfp-neon-poky-linux-gnueabi is referencing into the host machines /usr/include instead of the hardware specific version.
>
> I'm hoping someone has a clue that will help me get past this problem.
Have you tried to use the latest meta-oe layer as I said before?
You are using freescale release manifest. It is a stuck in time
manifest for every layer. What you've being built is not the same
Nicolay has built. So, please, try to use latest poky/meta-oe folder.
Or remove ptpd if you don't need it
Daiane
>
> Thanks,
>
> Terry
>
> -----Original Message-----
> From: angolini@gmail.com [mailto:angolini@gmail.com] On Behalf Of Daiane Angolini
> Sent: Thursday, August 27, 2015 9:15 AM
> To: Terry Farnham
> Cc: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] Help - new to Yocto
>
> On Thu, Aug 27, 2015 at 10:21 AM, Terry Farnham <terry.farnham@quanergy.com> wrote:
>> Thank you Daiane,
>>
>> I am assuming that the version name/number you are referring to is actually the name of the branch manifest that I pulled from using repo? I am using imx-3.14.28-1.0.0_ga.
>>
>
> Yes
>
> Daiane
>> Thank you for your time.
>>
>> Terry
>>
>> -----Original Message-----
>> From: angolini@gmail.com [mailto:angolini@gmail.com] On Behalf Of
>> Daiane Angolini
>> Sent: Thursday, August 27, 2015 4:46 AM
>> To: Terry Farnham
>> Cc: meta-freescale@yoctoproject.org
>> Subject: Re: [meta-freescale] Help - new to Yocto
>>
>> On Wed, Aug 26, 2015 at 9:50 PM, Terry Farnham <terry.farnham@quanergy.com> wrote:
>>> Hello,
>>>
>>>
>>>
>>> Disclaimer: I am totally new to Yocto as well as Linux development.
>>> So please bear with my ignorance.
>>
>> There are two important things you must know before anything else:
>>
>> 1 - http://freescale.github.io/doc/release-notes/1.8/
>> 2- when reporting error on Freescale Release, it's absolutely
>> important to know the release version name/number
>>
>> This error may be already fixed upstream, you can try to upgrade the original layer.
>>
>> Daiane
>>
>>>
>>>
>>>
>>> I am attempting to build from scratch a generic kernel image for the
>>> imx6qsabresd. I have followed a number of steps in getting setup to
>>> build properly. However after executing the final two steps:
>>>
>>>> MACHINE=imx6qsabresd source fsl-setup-release.sh –b build –e fb
>>>
>>>> bitbake fsl-image-gui
>>>
>>>
>>>
>>> I am getting a single compile error which I include after my
>>> signature. The most pertinent information, however, seems to be the
>>> warning where it indicates that it is unsafe to use the “/usr/include” include location.
>>> This does indeed seem bad since I am on an x86 machine compiling for
>>> arm. I am, however, totally oblivious as to why it would be looking
>>> in /usr/include for any include files. Please Help, as I am clueless
>>> and I really need to figure out the basic build process before I move
>>> forward on more advanced setups.
>>>
>>>
>>>
>>> Thanks,
>>>
>>>
>>>
>>> Terry Farnham
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> | cc1: warning: include location "/usr/include" is unsafe for
>>> cross-compilation [-Wpoison-system-directories]
>>>
>>> | In file included from /usr/include/bits/byteswap.h:35:0,
>>>
>>> | from /usr/include/endian.h:60,
>>>
>>> | from /usr/include/bits/waitstatus.h:64,
>>>
>>> | from /usr/include/stdlib.h:42,
>>>
>>> | from
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-pok
>>> y -linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/ptpd.h:40,
>>>
>>> | from
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:54:
>>>
>>> |
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:
>>> In function 'initData':
>>>
>>> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
>>> operand for code 'w'
>>>
>>> | __asm__ ("rorw $8, %w0" \
>>>
>>> | ^
>>>
>>> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>>>
>>> | # define htons(x) __bswap_16 (x)
>>>
>>> | ^
>>>
>>> |
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/bmc.c:83:21:
>>> note: in expansion of macro 'htons'
>>>
>>> | uint16_t pid = htons(getpid());
>>>
>>> | ^
>>>
>>> | {standard input}: Assembler messages:
>>>
>>> | {standard input}:397: Error: bad instruction `rorw $8,'
>>>
>>> | make[2]: *** [bmc.o] Error 1
>>>
>>> | make[2]: *** Waiting for unfinished jobs....
>>>
>>> | In file included from /usr/include/bits/byteswap.h:35:0,
>>>
>>> | from /usr/include/endian.h:60,
>>>
>>> | from /usr/include/bits/waitstatus.h:64,
>>>
>>> | from /usr/include/stdlib.h:42,
>>>
>>> | from
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-pok
>>> y
>>> -linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../ptpd.h:40,
>>>
>>> | from
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:54:
>>>
>>> |
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:
>>> In function 'packEnumeration16':
>>>
>>> | /usr/include/bits/byteswap-16.h:31:5: error: invalid 'asm': invalid
>>> operand for code 'w'
>>>
>>> | __asm__ ("rorw $8, %w0" \
>>>
>>> | ^
>>>
>>> | /usr/include/netinet/in.h:403:21: note: in expansion of macro '__bswap_16'
>>>
>>> | # define htons(x) __bswap_16 (x)
>>>
>>> | ^
>>>
>>> |
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/../dep/ptpd_dep.h:120:19:
>>> note: in expansion of macro 'htons'
>>>
>>> | #define flip16(x) htons(x)
>>>
>>> | ^
>>>
>>> |
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:71:16:
>>> note: in expansion of macro 'flip16'
>>>
>>> | *(type *)to = flip##size( *(type *)from ); \
>>>
>>> | ^
>>>
>>> |
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/ptpd-2.3.1-rc2/src/dep/msg.c:107:1:
>>> note: in expansion of macro 'PACK_ENDIAN'
>>>
>>> | PACK_ENDIAN( Enumeration16, 16 )
>>>
>>> | ^
>>>
>>> | {standard input}: Assembler messages:
>>>
>>> | {standard input}:235: Error: bad instruction `rorw $8,'
>>>
>>> | make[2]: *** [dep/msg.o] Error 1
>>>
>>> | make[2]: Leaving directory
>>> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build/src'
>>>
>>> | make[1]: *** [all-recursive] Error 1
>>>
>>> | make[1]: Leaving directory
>>> `/home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/ptpd/2.3.1-rc2-r0/build'
>>>
>>> | make: *** [all] Error 2
>>>
>>> | ERROR: oe_runmake failed
>>>
>>> | WARNING: exit code 1 from a shell command.
>>>
>>> | ERROR: Function failed: do_compile (log file is located at
>>> /home/tfarnham/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-pok
>>> y
>>> -linux-gnueabi/ptpd/2.3.1-rc2-r0/temp/log.do_compile.29823)
>>>
>>> ERROR: Task 1658
>>> (/home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-networ
>>> k ing/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
>>> do_compile) failed with exit code '1'
>>>
>>> NOTE: Tasks Summary: Attempted 2447 tasks of which 2444 didn't need
>>> to be rerun and 1 failed.
>>>
>>> Waiting for 0 running tasks to finish:
>>>
>>>
>>>
>>> Summary: 1 task failed:
>>>
>>>
>>> /home/tfarnham/fsl-release-bsp/sources/meta-openembedded/meta-network
>>> i ng/recipes-daemons/ptpd/ptpd_2.3.1-rc2.bb,
>>> do_compile
>>>
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> _______________________________________________
>>> meta-freescale mailing list
>>> meta-freescale@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>>
>>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-08-28 12:30 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-27 0:50 Help - new to Yocto Terry Farnham
2015-08-27 11:46 ` Daiane Angolini
2015-08-27 13:21 ` Terry Farnham
2015-08-27 16:15 ` Daiane Angolini
2015-08-28 5:29 ` Terry Farnham
2015-08-28 10:00 ` Nikolay Dimitrov
2015-08-28 12:30 ` Daiane Angolini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.