All of lore.kernel.org
 help / color / mirror / Atom feed
* SEC SEM BV 09, MITM + No Bonding
@ 2015-08-19 13:23 tony
  2015-08-19 16:23 ` Johan Hedberg
  0 siblings, 1 reply; 7+ messages in thread
From: tony @ 2015-08-19 13:23 UTC (permalink / raw)
  To: linux-bluetooth

Hi All,
            I am going through Bluez 4.101 qualification process and am 
stuck with second part of test case SEC SEM BV 09. The test case needs 
BlueZ to connect to Tester with Authentication requirement 0 (MITM not 
required + No Bonding). Then have to trigger another L2CAP connection 
with Authentication requirement 1 (MITM required + No Bonding).

We managed to get through the first part using l2test
l2test -n -P 1 -E
But the second part always does general bonding (Authentication 
Requirement 5).
l2test -n -S -P 17 -J 2

Can somebody please advise on how to force blueZ to initiate connection 
with authentication requirement 1 (MITM required + No Bonding)? From the 
blueZ code, I noticed it follows lead from the remote device. But 
couldn't find anything obvious when initiating connection.

Many Thanks,
Tony

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2015-11-05 10:40 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-19 13:23 SEC SEM BV 09, MITM + No Bonding tony
2015-08-19 16:23 ` Johan Hedberg
2015-08-28 14:44   ` tony
2015-09-02 14:50   ` Bluez-4.101 LE SMP support tony
2015-09-02 17:09     ` Marcel Holtmann
     [not found]     ` <563A1880.8000608@convergeddevices.net>
2015-11-05  9:12       ` BlueZ-5.36 segfault Luiz Augusto von Dentz
2015-11-05 10:40         ` tony

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.