From: Vlastimil Babka <vbabka@suse.cz>
To: Ebru Akagunduz <ebru.akagunduz@gmail.com>, linux-mm@kvack.org
Cc: akpm@linux-foundation.org, kirill.shutemov@linux.intel.com,
n-horiguchi@ah.jp.nec.com, aarcange@redhat.com, riel@redhat.com,
iamjoonsoo.kim@lge.com, xiexiuqi@huawei.com, gorcunov@openvz.org,
linux-kernel@vger.kernel.org, mgorman@suse.de,
rientjes@google.com, aneesh.kumar@linux.vnet.ibm.com,
hughd@google.com, hannes@cmpxchg.org, mhocko@suse.cz,
boaz@plexistor.com, raindel@mellanox.com
Subject: Re: [RESEND RFC v4 2/3] mm: make optimistic check for swapin readahead
Date: Fri, 4 Sep 2015 18:18:39 +0200 [thread overview]
Message-ID: <55E9C45F.60407@suse.cz> (raw)
In-Reply-To: <1441313508-4276-3-git-send-email-ebru.akagunduz@gmail.com>
On 09/03/2015 10:51 PM, Ebru Akagunduz wrote:
> This patch introduces new sysfs integer knob
> /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_swap
> which makes optimistic check for swapin readahead to
> increase thp collapse rate. Before getting swapped
> out pages to memory, checks them and allows up to a
> certain number. It also prints out using tracepoints
> amount of unmapped ptes.
>
> Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
...
> #include <asm/pgalloc.h>
> @@ -49,7 +50,8 @@ static const char *const khugepaged_status_string[] = {
> "page_swap_cache",
> "could_not_delete_page_from_lru",
> "alloc_huge_page_fail",
> - "ccgroup_charge_fail"
> + "ccgroup_charge_fail",
> + "exceed_swap_pte"
> };
>
> enum scan_result {
> @@ -73,7 +75,8 @@ enum scan_result {
> SCAN_SWAP_CACHE_PAGE,
> SCAN_DEL_PAGE_LRU,
> SCAN_ALLOC_HUGE_PAGE_FAIL,
> - SCAN_CGROUP_CHARGE_FAIL
> + SCAN_CGROUP_CHARGE_FAIL,
> + MM_EXCEED_SWAP_PTE
This one should be renamed too.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Vlastimil Babka <vbabka@suse.cz>
To: Ebru Akagunduz <ebru.akagunduz@gmail.com>, linux-mm@kvack.org
Cc: akpm@linux-foundation.org, kirill.shutemov@linux.intel.com,
n-horiguchi@ah.jp.nec.com, aarcange@redhat.com, riel@redhat.com,
iamjoonsoo.kim@lge.com, xiexiuqi@huawei.com, gorcunov@openvz.org,
linux-kernel@vger.kernel.org, mgorman@suse.de,
rientjes@google.com, aneesh.kumar@linux.vnet.ibm.com,
hughd@google.com, hannes@cmpxchg.org, mhocko@suse.cz,
boaz@plexistor.com, raindel@mellanox.com
Subject: Re: [RESEND RFC v4 2/3] mm: make optimistic check for swapin readahead
Date: Fri, 4 Sep 2015 18:18:39 +0200 [thread overview]
Message-ID: <55E9C45F.60407@suse.cz> (raw)
In-Reply-To: <1441313508-4276-3-git-send-email-ebru.akagunduz@gmail.com>
On 09/03/2015 10:51 PM, Ebru Akagunduz wrote:
> This patch introduces new sysfs integer knob
> /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_swap
> which makes optimistic check for swapin readahead to
> increase thp collapse rate. Before getting swapped
> out pages to memory, checks them and allows up to a
> certain number. It also prints out using tracepoints
> amount of unmapped ptes.
>
> Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
...
> #include <asm/pgalloc.h>
> @@ -49,7 +50,8 @@ static const char *const khugepaged_status_string[] = {
> "page_swap_cache",
> "could_not_delete_page_from_lru",
> "alloc_huge_page_fail",
> - "ccgroup_charge_fail"
> + "ccgroup_charge_fail",
> + "exceed_swap_pte"
> };
>
> enum scan_result {
> @@ -73,7 +75,8 @@ enum scan_result {
> SCAN_SWAP_CACHE_PAGE,
> SCAN_DEL_PAGE_LRU,
> SCAN_ALLOC_HUGE_PAGE_FAIL,
> - SCAN_CGROUP_CHARGE_FAIL
> + SCAN_CGROUP_CHARGE_FAIL,
> + MM_EXCEED_SWAP_PTE
This one should be renamed too.
next prev parent reply other threads:[~2015-09-04 16:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-03 20:51 [RESEND RFC v4 0/3] mm: make swapin readahead to gain more thp performance Ebru Akagunduz
2015-09-03 20:51 ` Ebru Akagunduz
2015-09-03 20:51 ` [RESEND RFC v4 1/3] mm: add tracepoint for scanning pages Ebru Akagunduz
2015-09-03 20:51 ` Ebru Akagunduz
2015-09-04 16:07 ` Vlastimil Babka
2015-09-04 16:07 ` Vlastimil Babka
2015-09-04 16:44 ` Rik van Riel
2015-09-04 16:44 ` Rik van Riel
2015-09-05 19:24 ` Ebru Akagunduz
2015-09-05 19:24 ` Ebru Akagunduz
2015-09-03 20:51 ` [RESEND RFC v4 2/3] mm: make optimistic check for swapin readahead Ebru Akagunduz
2015-09-03 20:51 ` Ebru Akagunduz
2015-09-04 16:18 ` Vlastimil Babka [this message]
2015-09-04 16:18 ` Vlastimil Babka
2015-09-03 20:51 ` [RESEND RFC v4 3/3] mm: make swapin readahead to improve thp collapse rate Ebru Akagunduz
2015-09-03 20:51 ` Ebru Akagunduz
2015-09-04 16:44 ` Vlastimil Babka
2015-09-04 16:44 ` Vlastimil Babka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55E9C45F.60407@suse.cz \
--to=vbabka@suse.cz \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=boaz@plexistor.com \
--cc=ebru.akagunduz@gmail.com \
--cc=gorcunov@openvz.org \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.cz \
--cc=n-horiguchi@ah.jp.nec.com \
--cc=raindel@mellanox.com \
--cc=riel@redhat.com \
--cc=rientjes@google.com \
--cc=xiexiuqi@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.