[linux-sunxi] Re: [PATCH] ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet

[hdegoede@redhat.com (Hans de Goede)]

Hi,

On 06-09-15 18:30, Maxime Ripard wrote:
> On Sat, Sep 05, 2015 at 10:21:59AM +0200, Hans de Goede wrote:
>> The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen,
>> microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors.
>>
>> It uses a rtl8188cus usb wifi chip and a RDA 5875Y bluetooth chip attached
>> to uart2. It has a bma250 accelerometer attached to i2c1 addr 0x18.
>>
>> It has a pixcir,pixcir_tangoc compatible touchscreen attached to i2c2 addr
>> 0x5c. This is not enabled in this dts, because this variant of the
>> pixcir_tangoc has separate wakeup and enable pins both of which need
>> to be driven low before the touchscreen will work. Before we can enable
>> this the pixcir driver and devicetree-bindings need to be extended to
>> support these pins.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   arch/arm/boot/dts/Makefile                       |   3 +-
>>   arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts | 209 +++++++++++++++++++++++
>>   2 files changed, 211 insertions(+), 1 deletion(-)
>>   create mode 100644 arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index e981fd6..c08883c 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -561,7 +561,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
>>   	sun4i-a10-mk802.dtb \
>>   	sun4i-a10-mk802ii.dtb \
>>   	sun4i-a10-olinuxino-lime.dtb \
>> -	sun4i-a10-pcduino.dtb
>> +	sun4i-a10-pcduino.dtb \
>> +	sun4i-a10-pov-protab2-ips9.dtb
>>   dtb-$(CONFIG_MACH_SUN5I) += \
>>   	sun5i-a10s-auxtek-t003.dtb \
>>   	sun5i-a10s-auxtek-t004.dtb \
>> diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
>> new file mode 100644
>> index 0000000..223515e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
>> @@ -0,0 +1,209 @@
>> +/*
>> + * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This file is free software; you can redistribute it and/or
>> + *     modify it under the terms of the GNU General Public License as
>> + *     published by the Free Software Foundation; either version 2 of the
>> + *     License, or (at your option) any later version.
>> + *
>> + *     This file is distributed in the hope that it will be useful,
>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *     GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "sun4i-a10.dtsi"
>> +#include "sunxi-common-regulators.dtsi"
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>> +
>> +/ {
>> +	model = "Point of View Protab2-IPS9";
>> +	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +};
>> +
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>> +&ehci0 {
>> +	status = "okay";
>> +};
>> +
>> +&i2c0 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&i2c0_pins_a>;
>> +	status = "okay";
>> +
>> +	axp209: pmic at 34 {
>> +		reg = <0x34>;
>> +		interrupts = <0>;
>> +	};
>> +};
>> +
>> +#include "axp209.dtsi"
>> +
>> +&i2c1 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&i2c1_pins_a>;
>> +	status = "okay";
>> +};
>> +
>> +&i2c2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&i2c2_pins_a>;
>> +	status = "okay";
>> +};
>> +
>> +&lradc {
>> +	vref-supply = <&reg_ldo2>;
>> +	status = "okay";
>> +
>> +	button at 400 {
>> +		label = "Volume Up";
>> +		linux,code = <KEY_VOLUMEUP>;
>> +		channel = <0>;
>> +		voltage = <400000>;
>> +	};
>> +
>> +	button at 800 {
>> +		label = "Volume Down";
>> +		linux,code = <KEY_VOLUMEDOWN>;
>> +		channel = <0>;
>> +		voltage = <800000>;
>> +	};
>> +};
>> +
>> +&mmc0 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
>> +	vmmc-supply = <&reg_vcc3v3>;
>> +	bus-width = <4>;
>> +	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
>> +	cd-inverted;
>> +	status = "okay";
>> +};
>> +
>> +&otg_sram {
>> +	status = "okay";
>> +};
>> +
>> +&pio {
>> +	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
>> +		allwinner,pins = "PH4";
>> +		allwinner,function = "gpio_in";
>> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>> +	};
>> +
>> +	usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
>> +		allwinner,pins = "PH5";
>> +		allwinner,function = "gpio_in";
>> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
>> +	};
>> +};
>> +
>> +&reg_dcdc2 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1000000>;
>> +	regulator-max-microvolt = <1400000>;
>> +	regulator-name = "vdd-cpu";
>> +};
>> +
>> +&reg_dcdc3 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1250000>;
>> +	regulator-max-microvolt = <1250000>;
>> +	regulator-name = "vdd-int-dll";
>> +};
>> +
>> +&reg_ldo1 {
>> +	regulator-name = "vdd-rtc";
>> +};
>> +
>> +&reg_ldo2 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <3000000>;
>> +	regulator-max-microvolt = <3000000>;
>> +	regulator-name = "avcc";
>> +};
>> +
>> +&reg_ldo3 {
>> +	/*
>> +	 * We need to always power the camera sensor, otherwhise all access
>> +	 * to i2c1 is blocked.
>> +	 */
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <2800000>;
>> +	regulator-max-microvolt = <2800000>;
>> +	regulator-name = "vdd-csi";
>> +};
>
> What is connected on i2c1 ? Just the camera sensor? or it has some
> other devices there?

The bma250 accelerometer sits there, and the kernel already has a driver
for it. That driver needs to have devicetree binding support added, and
then we should be able to use the accelerometer.

Regards,

Hans