From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org
Cc: tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata"
Date: Mon, 7 Sep 2015 10:52:14 +0200 [thread overview]
Message-ID: <55ED503E.5000902@redhat.com> (raw)
In-Reply-To: <1441614196-4284-1-git-send-email-Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Hi,
On 07-09-15 10:23, Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:
> From: Tang Yuantian <Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>
> This reverts commit 5163fb62541e
> ("ahci: added support for Freescale AHCI sata")
>
> The reverted patch added Freescale QorIQ AHCI sata support to
> ahci_platform driver though, but it left SoC specific settings to uboot.
> It leads to QorIQ sata heavily depending on uboot. In order to removing
> the dependency we first revert the old patch and then will add a new driver
> for QorIQ SATA.
> Since there are no LS* platforms that have been upstreamed, So
> the revert would not break anything exists.
>
> Signed-off-by: Tang Yuantian <Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
The entire series looks good to me and is:
Reviewed-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Regards,
Hans
> ---
> Documentation/devicetree/bindings/ata/ahci-platform.txt | 2 --
> drivers/ata/ahci_platform.c | 1 -
> 2 files changed, 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index a232181..c2340ee 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -16,8 +16,6 @@ Required properties:
> - "snps,dwc-ahci"
> - "snps,exynos5440-ahci"
> - "snps,spear-ahci"
> - - "fsl,qoriq-ahci" : for qoriq series socs which include ls1021, ls2085, etc.
> - - "fsl,<chip>-ahci" : chip could be ls1021, ls2085 etc.
> - "generic-ahci"
> - interrupts : <interrupt mapping for SATA IRQ>
> - reg : <registers mapping>
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 1befb11..04975b8 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -76,7 +76,6 @@ static const struct of_device_id ahci_of_match[] = {
> { .compatible = "ibm,476gtr-ahci", },
> { .compatible = "snps,dwc-ahci", },
> { .compatible = "hisilicon,hisi-ahci", },
> - { .compatible = "fsl,qoriq-ahci", },
> {},
> };
> MODULE_DEVICE_TABLE(of, ahci_of_match);
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Hans de Goede <hdegoede@redhat.com>
To: Yuantian.Tang@freescale.com
Cc: tj@kernel.org, linux-ide@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata"
Date: Mon, 7 Sep 2015 10:52:14 +0200 [thread overview]
Message-ID: <55ED503E.5000902@redhat.com> (raw)
In-Reply-To: <1441614196-4284-1-git-send-email-Yuantian.Tang@freescale.com>
Hi,
On 07-09-15 10:23, Yuantian.Tang@freescale.com wrote:
> From: Tang Yuantian <Yuantian.Tang@freescale.com>
>
> This reverts commit 5163fb62541e
> ("ahci: added support for Freescale AHCI sata")
>
> The reverted patch added Freescale QorIQ AHCI sata support to
> ahci_platform driver though, but it left SoC specific settings to uboot.
> It leads to QorIQ sata heavily depending on uboot. In order to removing
> the dependency we first revert the old patch and then will add a new driver
> for QorIQ SATA.
> Since there are no LS* platforms that have been upstreamed, So
> the revert would not break anything exists.
>
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
The entire series looks good to me and is:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Regards,
Hans
> ---
> Documentation/devicetree/bindings/ata/ahci-platform.txt | 2 --
> drivers/ata/ahci_platform.c | 1 -
> 2 files changed, 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index a232181..c2340ee 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -16,8 +16,6 @@ Required properties:
> - "snps,dwc-ahci"
> - "snps,exynos5440-ahci"
> - "snps,spear-ahci"
> - - "fsl,qoriq-ahci" : for qoriq series socs which include ls1021, ls2085, etc.
> - - "fsl,<chip>-ahci" : chip could be ls1021, ls2085 etc.
> - "generic-ahci"
> - interrupts : <interrupt mapping for SATA IRQ>
> - reg : <registers mapping>
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 1befb11..04975b8 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -76,7 +76,6 @@ static const struct of_device_id ahci_of_match[] = {
> { .compatible = "ibm,476gtr-ahci", },
> { .compatible = "snps,dwc-ahci", },
> { .compatible = "hisilicon,hisi-ahci", },
> - { .compatible = "fsl,qoriq-ahci", },
> {},
> };
> MODULE_DEVICE_TABLE(of, ahci_of_match);
>
next prev parent reply other threads:[~2015-09-07 8:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-07 8:23 [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata" Yuantian.Tang
2015-09-07 8:23 ` Yuantian.Tang
2015-09-07 8:23 ` [PATCH 2/3] devicetree:bindings: add devicetree bindings for Freescale AHCI Yuantian.Tang
2015-09-07 8:23 ` Yuantian.Tang
2015-09-09 23:19 ` Li Yang
[not found] ` <CADRPPNSSzWKY1P0DwyPLuTKk31YhnLxExoJX3GG+EpyWYdqSbQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-10 1:23 ` Yuantian Tang
2015-09-10 1:23 ` Yuantian Tang
2015-09-07 8:23 ` [PATCH 3/3 v2] ahci: added a new driver for supporting Freescale AHCI sata Yuantian.Tang
2015-09-07 8:23 ` Yuantian.Tang
[not found] ` <1441614196-4284-1-git-send-email-Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-09-07 8:52 ` Hans de Goede [this message]
2015-09-07 8:52 ` [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata" Hans de Goede
2015-09-08 16:31 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55ED503E.5000902@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.