[Qemu-devel] [PATCH v2 0/4] ide: simple ATAPI tests

[Qemu-devel] [PATCH v2 0/4] ide: simple ATAPI tests

[John Snow]

We don't have any CDROM tests yet.
So, add some for the PCI/BMDMA HBA.

===
v2:
===

 - Some readability feedback from Markus
 - Added an IRQ poll for the DRQ read loop

________________________________________________________________________________

For convenience, this branch is available at:
https://github.com/jnsnow/qemu.git branch ide-atapi-test
https://github.com/jnsnow/qemu/tree/ide-atapi-test

This version is tagged ide-atapi-test-v2:
https://github.com/jnsnow/qemu/releases/tag/ide-atapi-test-v2

John Snow (4):
  qtest/ahci: use generate_pattern everywhere
  qtest/ahci: export generate_pattern
  ide-test: add cdrom pio test
  ide-test: add cdrom dma test

 tests/ahci-test.c     |  43 +--------
 tests/ide-test.c      | 245 ++++++++++++++++++++++++++++++++++++++++++++++----
 tests/libqos/libqos.c |  26 ++++++
 tests/libqos/libqos.h |   1 +
 4 files changed, 258 insertions(+), 57 deletions(-)

-- 
2.4.3

[Qemu-devel] [PATCH v2 1/4] qtest/ahci: use generate_pattern everywhere

[John Snow]

Fix the pattern generation to actually be interesting,
and make sure all buffers in the ahci-test actually use it.

Signed-off-by: John Snow <jsnow@redhat.com>
---
 tests/ahci-test.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 87d7691..b1a785c 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -80,9 +80,9 @@ static void generate_pattern(void *buffer, size_t len, size_t cycle_len)
 
     /* Write an indicative pattern that varies and is unique per-cycle */
     p = rand() % 256;
-    for (i = j = 0; i < len; i++, j++) {
-        tx[i] = p;
-        if (j % cycle_len == 0) {
+    for (i = 0; i < len; i++) {
+        tx[i] = p++ % 256;
+        if (i % cycle_len == 0) {
             p = rand() % 256;
         }
     }
@@ -1155,7 +1155,6 @@ static void ahci_migrate_simple(uint8_t cmd_read, uint8_t cmd_write)
     size_t bufsize = 4096;
     unsigned char *tx = g_malloc(bufsize);
     unsigned char *rx = g_malloc0(bufsize);
-    unsigned i;
     const char *uri = "tcp:127.0.0.1:1234";
 
     src = ahci_boot_and_enable("-m 1024 -M q35 "
@@ -1171,9 +1170,7 @@ static void ahci_migrate_simple(uint8_t cmd_read, uint8_t cmd_write)
     ahci_port_clear(src, px);
 
     /* create pattern */
-    for (i = 0; i < bufsize; i++) {
-        tx[i] = (bufsize - i);
-    }
+    generate_pattern(tx, bufsize, AHCI_SECTOR_SIZE);
 
     /* Write, migrate, then read. */
     ahci_io(src, px, cmd_write, tx, bufsize, 0);
@@ -1213,7 +1210,6 @@ static void ahci_halted_io_test(uint8_t cmd_read, uint8_t cmd_write)
     size_t bufsize = 4096;
     unsigned char *tx = g_malloc(bufsize);
     unsigned char *rx = g_malloc0(bufsize);
-    unsigned i;
     uint64_t ptr;
     AHCICommand *cmd;
 
@@ -1231,11 +1227,8 @@ static void ahci_halted_io_test(uint8_t cmd_read, uint8_t cmd_write)
     port = ahci_port_select(ahci);
     ahci_port_clear(ahci, port);
 
-    for (i = 0; i < bufsize; i++) {
-        tx[i] = (bufsize - i);
-    }
-
     /* create DMA source buffer and write pattern */
+    generate_pattern(tx, bufsize, AHCI_SECTOR_SIZE);
     ptr = ahci_alloc(ahci, bufsize);
     g_assert(ptr);
     memwrite(ptr, tx, bufsize);
@@ -1282,7 +1275,6 @@ static void ahci_migrate_halted_io(uint8_t cmd_read, uint8_t cmd_write)
     size_t bufsize = 4096;
     unsigned char *tx = g_malloc(bufsize);
     unsigned char *rx = g_malloc0(bufsize);
-    unsigned i;
     uint64_t ptr;
     AHCICommand *cmd;
     const char *uri = "tcp:127.0.0.1:1234";
@@ -1310,10 +1302,7 @@ static void ahci_migrate_halted_io(uint8_t cmd_read, uint8_t cmd_write)
     /* Initialize and prepare */
     port = ahci_port_select(src);
     ahci_port_clear(src, port);
-
-    for (i = 0; i < bufsize; i++) {
-        tx[i] = (bufsize - i);
-    }
+    generate_pattern(tx, bufsize, AHCI_SECTOR_SIZE);
 
     /* create DMA source buffer and write pattern */
     ptr = ahci_alloc(src, bufsize);
-- 
2.4.3

[Qemu-devel] [PATCH v2 2/4] qtest/ahci: export generate_pattern

[John Snow]

Share the pattern function for ide and ahci test.

Signed-off-by: John Snow <jsnow@redhat.com>
---
 tests/ahci-test.c     | 26 --------------------------
 tests/libqos/libqos.c | 26 ++++++++++++++++++++++++++
 tests/libqos/libqos.h |  1 +
 3 files changed, 27 insertions(+), 26 deletions(-)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index b1a785c..59d387c 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -71,32 +71,6 @@ static void string_bswap16(uint16_t *s, size_t bytes)
     }
 }
 
-static void generate_pattern(void *buffer, size_t len, size_t cycle_len)
-{
-    int i, j;
-    unsigned char *tx = (unsigned char *)buffer;
-    unsigned char p;
-    size_t *sx;
-
-    /* Write an indicative pattern that varies and is unique per-cycle */
-    p = rand() % 256;
-    for (i = 0; i < len; i++) {
-        tx[i] = p++ % 256;
-        if (i % cycle_len == 0) {
-            p = rand() % 256;
-        }
-    }
-
-    /* force uniqueness by writing an id per-cycle */
-    for (i = 0; i < len / cycle_len; i++) {
-        j = i * cycle_len;
-        if (j + sizeof(*sx) <= len) {
-            sx = (size_t *)&tx[j];
-            *sx = i;
-        }
-    }
-}
-
 /**
  * Verify that the transfer did not corrupt our state at all.
  */
diff --git a/tests/libqos/libqos.c b/tests/libqos/libqos.c
index fce625b..8d7c5a9 100644
--- a/tests/libqos/libqos.c
+++ b/tests/libqos/libqos.c
@@ -212,3 +212,29 @@ void prepare_blkdebug_script(const char *debug_fn, const char *event)
     ret = fclose(debug_file);
     g_assert(ret == 0);
 }
+
+void generate_pattern(void *buffer, size_t len, size_t cycle_len)
+{
+    int i, j;
+    unsigned char *tx = (unsigned char *)buffer;
+    unsigned char p;
+    size_t *sx;
+
+    /* Write an indicative pattern that varies and is unique per-cycle */
+    p = rand() % 256;
+    for (i = 0; i < len; i++) {
+        tx[i] = p++ % 256;
+        if (i % cycle_len == 0) {
+            p = rand() % 256;
+        }
+    }
+
+    /* force uniqueness by writing an id per-cycle */
+    for (i = 0; i < len / cycle_len; i++) {
+        j = i * cycle_len;
+        if (j + sizeof(*sx) <= len) {
+            sx = (size_t *)&tx[j];
+            *sx = i;
+        }
+    }
+}
diff --git a/tests/libqos/libqos.h b/tests/libqos/libqos.h
index e1f14ea..492a651 100644
--- a/tests/libqos/libqos.h
+++ b/tests/libqos/libqos.h
@@ -24,6 +24,7 @@ void mkqcow2(const char *file, unsigned size_mb);
 void set_context(QOSState *s);
 void migrate(QOSState *from, QOSState *to, const char *uri);
 void prepare_blkdebug_script(const char *debug_fn, const char *event);
+void generate_pattern(void *buffer, size_t len, size_t cycle_len);
 
 static inline uint64_t qmalloc(QOSState *q, size_t bytes)
 {
-- 
2.4.3

[Qemu-devel] [PATCH v2 3/4] ide-test: add cdrom pio test

[John Snow]

Add a simple read test for ATAPI devices,
using the PIO mechanism.

Signed-off-by: John Snow <jsnow@redhat.com>
---
 tests/ide-test.c | 157 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 157 insertions(+)

diff --git a/tests/ide-test.c b/tests/ide-test.c
index 4a07e3a..b3ddcf4 100644
--- a/tests/ide-test.c
+++ b/tests/ide-test.c
@@ -45,6 +45,12 @@
 #define IDE_BASE 0x1f0
 #define IDE_PRIMARY_IRQ 14
 
+#define ATAPI_BLOCK_SIZE 2048
+
+/* How many bytes to receive via ATAPI PIO at one time.
+ * Must be less than 0xFFFF. */
+#define BYTE_COUNT_LIMIT 5120
+
 enum {
     reg_data        = 0x0,
     reg_nsectors    = 0x2,
@@ -80,6 +86,7 @@ enum {
     CMD_WRITE_DMA   = 0xca,
     CMD_FLUSH_CACHE = 0xe7,
     CMD_IDENTIFY    = 0xec,
+    CMD_PACKET      = 0xa0,
 
     CMDF_ABORT      = 0x100,
     CMDF_NO_BM      = 0x200,
@@ -585,6 +592,153 @@ static void test_isa_retry_flush(const char *machine)
     test_retry_flush("isapc");
 }
 
+typedef struct Read10CDB {
+    uint8_t opcode;
+    uint8_t flags;
+    uint32_t lba;
+    uint8_t reserved;
+    uint16_t nblocks;
+    uint8_t control;
+    uint16_t padding;
+} __attribute__((__packed__)) Read10CDB;
+
+static void send_scsi_cdb_read10(uint32_t lba, uint16_t nblocks)
+{
+    Read10CDB pkt = { .padding = 0 };
+    int i;
+
+    /* Construct SCSI CDB packet */
+    pkt.opcode = 0x28;
+    pkt.lba = cpu_to_be32(lba);
+    pkt.nblocks = cpu_to_be16(nblocks);
+
+    /* Send Packet */
+    for (i = 0; i < sizeof(Read10CDB)/2; i++) {
+        outw(IDE_BASE + reg_data, ((uint16_t *)&pkt)[i]);
+    }
+}
+
+static void nsleep(int64_t nsecs)
+{
+    const struct timespec val = { .tv_nsec = nsecs };
+    nanosleep(&val, NULL);
+    clock_set(nsecs);
+}
+
+static uint8_t ide_wait_clear(uint8_t flag)
+{
+    int i;
+    uint8_t data;
+
+    /* Wait with a 5 second timeout */
+    for (i = 0; i <= 12500000; i++) {
+        data = inb(IDE_BASE + reg_status);
+        if (!(data & flag)) {
+            return data;
+        }
+        nsleep(400);
+    }
+    g_assert_not_reached();
+}
+
+static void ide_wait_intr(int irq)
+{
+    int i;
+    bool intr;
+
+    for (i = 0; i <= 12500000; i++) {
+        intr = get_irq(irq);
+        if (intr) {
+            return;
+        }
+        nsleep(400);
+    }
+
+    g_assert_not_reached();
+}
+
+static void cdrom_pio_impl(int nblocks)
+{
+    FILE *fh;
+    int patt_blocks = MAX(16, nblocks);
+    size_t patt_len = ATAPI_BLOCK_SIZE * patt_blocks;
+    char *pattern = g_malloc(patt_len);
+    size_t rxsize = ATAPI_BLOCK_SIZE * nblocks;
+    uint16_t *rx = g_malloc0(rxsize);
+    int i, j;
+    uint8_t data;
+    uint16_t limit;
+
+    /* Prepopulate the CDROM with an interesting pattern */
+    generate_pattern(pattern, patt_len, ATAPI_BLOCK_SIZE);
+    fh = fopen(tmp_path, "w+");
+    fwrite(pattern, ATAPI_BLOCK_SIZE, patt_blocks, fh);
+    fclose(fh);
+
+    ide_test_start("-drive if=none,file=%s,media=cdrom,format=raw,id=sr0,index=0 "
+                   "-device ide-cd,drive=sr0,bus=ide.0", tmp_path);
+    qtest_irq_intercept_in(global_qtest, "ioapic");
+
+    /* PACKET command on device 0 */
+    outb(IDE_BASE + reg_device, 0);
+    outb(IDE_BASE + reg_lba_middle, BYTE_COUNT_LIMIT & 0xFF);
+    outb(IDE_BASE + reg_lba_high, (BYTE_COUNT_LIMIT >> 8 & 0xFF));
+    outb(IDE_BASE + reg_command, CMD_PACKET);
+    /* HPD0: Check_Status_A State */
+    nsleep(400);
+    data = ide_wait_clear(BSY);
+    /* HPD1: Send_Packet State */
+    assert_bit_set(data, DRQ | DRDY);
+    assert_bit_clear(data, ERR | DF | BSY);
+
+    /* SCSI CDB (READ10) -- read n*2048 bytes from block 0 */
+    send_scsi_cdb_read10(0, nblocks);
+
+    /* HPD3: INTRQ_Wait */
+    ide_wait_intr(IDE_PRIMARY_IRQ);
+
+    /* HPD2: Check_Status_B */
+    data = ide_wait_clear(BSY);
+    assert_bit_set(data, DRQ | DRDY);
+    assert_bit_clear(data, ERR | DF | BSY);
+
+    /* Read data back: occurs in bursts of 'BYTE_COUNT_LIMIT' bytes.
+     * If BYTE_COUNT_LIMIT is odd, we transfer BYTE_COUNT_LIMIT - 1 bytes.
+     * We allow an odd limit only when the remaining transfer size is
+     * less than BYTE_COUNT_LIMIT. However, SCSI's read10 command can only
+     * request n blocks, so our request size is always even.
+     * For this reason, we assume there is never a hanging byte to fetch. */
+    g_assert(!(rxsize & 1));
+    limit = BYTE_COUNT_LIMIT & ~1;
+    for (i = 0; i < DIV_ROUND_UP(rxsize, limit); i++) {
+        size_t offset = i * (limit / 2);
+        size_t rem = (rxsize / 2) - offset;
+        for (j = 0; j < MIN((limit / 2), rem); j++) {
+            rx[offset + j] = inw(IDE_BASE + reg_data);
+        }
+        ide_wait_intr(IDE_PRIMARY_IRQ);
+    }
+    data = ide_wait_clear(DRQ);
+    assert_bit_set(data, DRDY);
+    assert_bit_clear(data, DRQ | ERR | DF | BSY);
+
+    g_assert_cmpint(memcmp(pattern, rx, rxsize), ==, 0);
+    g_free(pattern);
+    g_free(rx);
+    test_bmdma_teardown();
+}
+
+static void test_cdrom_pio(void)
+{
+    cdrom_pio_impl(1);
+}
+
+static void test_cdrom_pio_large(void)
+{
+    /* Test a few loops of the PIO DRQ mechanism. */
+    cdrom_pio_impl(BYTE_COUNT_LIMIT * 4 / ATAPI_BLOCK_SIZE);
+}
+
 int main(int argc, char **argv)
 {
     const char *arch = qtest_get_arch();
@@ -628,6 +782,9 @@ int main(int argc, char **argv)
     qtest_add_func("/ide/flush/retry_pci", test_pci_retry_flush);
     qtest_add_func("/ide/flush/retry_isa", test_isa_retry_flush);
 
+    qtest_add_func("/ide/cdrom/pio", test_cdrom_pio);
+    qtest_add_func("/ide/cdrom/pio_large", test_cdrom_pio_large);
+
     ret = g_test_run();
 
     /* Cleanup */
-- 
2.4.3

[Qemu-devel] [PATCH v2 4/4] ide-test: add cdrom dma test

[John Snow]

Now, test the DMA functionality of the ATAPI drive.

Signed-off-by: John Snow <jsnow@redhat.com>
---
 tests/ide-test.c | 90 ++++++++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 72 insertions(+), 18 deletions(-)

diff --git a/tests/ide-test.c b/tests/ide-test.c
index b3ddcf4..5594738 100644
--- a/tests/ide-test.c
+++ b/tests/ide-test.c
@@ -53,6 +53,7 @@
 
 enum {
     reg_data        = 0x0,
+    reg_feature     = 0x1,
     reg_nsectors    = 0x2,
     reg_lba_low     = 0x3,
     reg_lba_middle  = 0x4,
@@ -179,7 +180,8 @@ typedef struct PrdtEntry {
 #define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0)
 
 static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
-                            PrdtEntry *prdt, int prdt_entries)
+                            PrdtEntry *prdt, int prdt_entries,
+                            void(*post_exec)(uint64_t sector, int nb_sectors))
 {
     QPCIDevice *dev;
     uint16_t bmdma_base;
@@ -196,6 +198,9 @@ static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
 
     switch (cmd) {
     case CMD_READ_DMA:
+    case CMD_PACKET:
+        /* Assuming we only test data reads w/ ATAPI, otherwise we need to know
+         * the SCSI command being sent in the packet, too. */
         from_dev = true;
         break;
     case CMD_WRITE_DMA:
@@ -224,14 +229,22 @@ static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
     outl(bmdma_base + bmreg_prdt, guest_prdt);
 
     /* ATA DMA command */
-    outb(IDE_BASE + reg_nsectors, nb_sectors);
-
-    outb(IDE_BASE + reg_lba_low,    sector & 0xff);
-    outb(IDE_BASE + reg_lba_middle, (sector >> 8) & 0xff);
-    outb(IDE_BASE + reg_lba_high,   (sector >> 16) & 0xff);
+    if (cmd == CMD_PACKET) {
+        /* Enables ATAPI DMA; otherwise PIO is attempted */
+        outb(IDE_BASE + reg_feature, 0x01);
+    } else {
+        outb(IDE_BASE + reg_nsectors, nb_sectors);
+        outb(IDE_BASE + reg_lba_low,    sector & 0xff);
+        outb(IDE_BASE + reg_lba_middle, (sector >> 8) & 0xff);
+        outb(IDE_BASE + reg_lba_high,   (sector >> 16) & 0xff);
+    }
 
     outb(IDE_BASE + reg_command, cmd);
 
+    if (post_exec) {
+        post_exec(sector, nb_sectors);
+    }
+
     /* Start DMA transfer */
     outb(bmdma_base + bmreg_cmd, BM_CMD_START | (from_dev ? BM_CMD_WRITE : 0));
 
@@ -285,7 +298,8 @@ static void test_bmdma_simple_rw(void)
     memset(buf, 0x55, len);
     memwrite(guest_buf, buf, len);
 
-    status = send_dma_request(CMD_WRITE_DMA, 0, 1, prdt, ARRAY_SIZE(prdt));
+    status = send_dma_request(CMD_WRITE_DMA, 0, 1, prdt,
+                              ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, BM_STS_INTR);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 
@@ -293,14 +307,15 @@ static void test_bmdma_simple_rw(void)
     memset(buf, 0xaa, len);
     memwrite(guest_buf, buf, len);
 
-    status = send_dma_request(CMD_WRITE_DMA, 1, 1, prdt, ARRAY_SIZE(prdt));
+    status = send_dma_request(CMD_WRITE_DMA, 1, 1, prdt,
+                              ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, BM_STS_INTR);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 
     /* Read and verify 0x55 pattern in sector 0 */
     memset(cmpbuf, 0x55, len);
 
-    status = send_dma_request(CMD_READ_DMA, 0, 1, prdt, ARRAY_SIZE(prdt));
+    status = send_dma_request(CMD_READ_DMA, 0, 1, prdt, ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, BM_STS_INTR);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 
@@ -310,7 +325,7 @@ static void test_bmdma_simple_rw(void)
     /* Read and verify 0xaa pattern in sector 1 */
     memset(cmpbuf, 0xaa, len);
 
-    status = send_dma_request(CMD_READ_DMA, 1, 1, prdt, ARRAY_SIZE(prdt));
+    status = send_dma_request(CMD_READ_DMA, 1, 1, prdt, ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, BM_STS_INTR);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 
@@ -335,13 +350,13 @@ static void test_bmdma_short_prdt(void)
 
     /* Normal request */
     status = send_dma_request(CMD_READ_DMA, 0, 1,
-                              prdt, ARRAY_SIZE(prdt));
+                              prdt, ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, 0);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 
     /* Abort the request before it completes */
     status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
-                              prdt, ARRAY_SIZE(prdt));
+                              prdt, ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, 0);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 }
@@ -360,13 +375,13 @@ static void test_bmdma_one_sector_short_prdt(void)
 
     /* Normal request */
     status = send_dma_request(CMD_READ_DMA, 0, 2,
-                              prdt, ARRAY_SIZE(prdt));
+                              prdt, ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, 0);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 
     /* Abort the request before it completes */
     status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 2,
-                              prdt, ARRAY_SIZE(prdt));
+                              prdt, ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, 0);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 }
@@ -384,13 +399,13 @@ static void test_bmdma_long_prdt(void)
 
     /* Normal request */
     status = send_dma_request(CMD_READ_DMA, 0, 1,
-                              prdt, ARRAY_SIZE(prdt));
+                              prdt, ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 
     /* Abort the request before it completes */
     status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
-                              prdt, ARRAY_SIZE(prdt));
+                              prdt, ARRAY_SIZE(prdt), NULL);
     g_assert_cmphex(status, ==, BM_STS_INTR);
     assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
 }
@@ -406,7 +421,7 @@ static void test_bmdma_no_busmaster(void)
     PrdtEntry prdt[4096] = { };
 
     status = send_dma_request(CMD_READ_DMA | CMDF_NO_BM, 0, 512,
-                              prdt, ARRAY_SIZE(prdt));
+                              prdt, ARRAY_SIZE(prdt), NULL);
 
     /* Not entirely clear what the expected result is, but this is what we get
      * in practice. At least we want to be aware of any changes. */
@@ -602,11 +617,15 @@ typedef struct Read10CDB {
     uint16_t padding;
 } __attribute__((__packed__)) Read10CDB;
 
-static void send_scsi_cdb_read10(uint32_t lba, uint16_t nblocks)
+static void send_scsi_cdb_read10(uint64_t lba, int nblocks)
 {
     Read10CDB pkt = { .padding = 0 };
     int i;
 
+    g_assert_cmpint(lba, <=, UINT32_MAX);
+    g_assert_cmpint(nblocks, <=, UINT16_MAX);
+    g_assert_cmpint(nblocks, >=, 0);
+
     /* Construct SCSI CDB packet */
     pkt.opcode = 0x28;
     pkt.lba = cpu_to_be32(lba);
@@ -739,6 +758,40 @@ static void test_cdrom_pio_large(void)
     cdrom_pio_impl(BYTE_COUNT_LIMIT * 4 / ATAPI_BLOCK_SIZE);
 }
 
+
+static void test_cdrom_dma(void)
+{
+    static const size_t len = ATAPI_BLOCK_SIZE;
+    char *pattern = g_malloc(ATAPI_BLOCK_SIZE * 16);
+    char *rx = g_malloc0(len);
+    uintptr_t guest_buf;
+    PrdtEntry prdt[1];
+    FILE *fh;
+
+    ide_test_start("-drive if=none,file=%s,media=cdrom,format=raw,id=sr0,index=0 "
+                   "-device ide-cd,drive=sr0,bus=ide.0", tmp_path);
+    qtest_irq_intercept_in(global_qtest, "ioapic");
+
+    guest_buf = guest_alloc(guest_malloc, len);
+    prdt[0].addr = cpu_to_le32(guest_buf);
+    prdt[0].size = cpu_to_le32(len | PRDT_EOT);
+
+    generate_pattern(pattern, ATAPI_BLOCK_SIZE * 16, ATAPI_BLOCK_SIZE);
+    fh = fopen(tmp_path, "w+");
+    fwrite(pattern, ATAPI_BLOCK_SIZE, 16, fh);
+    fclose(fh);
+
+    send_dma_request(CMD_PACKET, 0, 1, prdt, 1, send_scsi_cdb_read10);
+
+    /* Read back data from guest memory into local qtest memory */
+    memread(guest_buf, rx, len);
+    g_assert_cmpint(memcmp(pattern, rx, len), ==, 0);
+
+    g_free(pattern);
+    g_free(rx);
+    test_bmdma_teardown();
+}
+
 int main(int argc, char **argv)
 {
     const char *arch = qtest_get_arch();
@@ -784,6 +837,7 @@ int main(int argc, char **argv)
 
     qtest_add_func("/ide/cdrom/pio", test_cdrom_pio);
     qtest_add_func("/ide/cdrom/pio_large", test_cdrom_pio_large);
+    qtest_add_func("/ide/cdrom/dma", test_cdrom_dma);
 
     ret = g_test_run();
 
-- 
2.4.3

Re: [Qemu-devel] [Qemu-block] [PATCH v2 1/4] qtest/ahci: use generate_pattern everywhere

[Eric Blake]

[-- Attachment #1: Type: text/plain, Size: 1160 bytes --]

On 09/10/2015 05:09 PM, John Snow wrote:
> Fix the pattern generation to actually be interesting,
> and make sure all buffers in the ahci-test actually use it.
> 
> Signed-off-by: John Snow <jsnow@redhat.com>
> ---
>  tests/ahci-test.c | 23 ++++++-----------------
>  1 file changed, 6 insertions(+), 17 deletions(-)
> 
> diff --git a/tests/ahci-test.c b/tests/ahci-test.c
> index 87d7691..b1a785c 100644
> --- a/tests/ahci-test.c
> +++ b/tests/ahci-test.c
> @@ -80,9 +80,9 @@ static void generate_pattern(void *buffer, size_t len, size_t cycle_len)
>  
>      /* Write an indicative pattern that varies and is unique per-cycle */
>      p = rand() % 256;
> -    for (i = j = 0; i < len; i++, j++) {
> -        tx[i] = p;
> -        if (j % cycle_len == 0) {
> +    for (i = 0; i < len; i++) {
> +        tx[i] = p++ % 256;
> +        if (i % cycle_len == 0) {
>              p = rand() % 256;

I'd drop the pointless %256, since the compiler already automatically
truncates int to char when assigning to a char variable.

-- 
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]

Re: [Qemu-devel] [PATCH v2 0/4] ide: simple ATAPI tests

[John Snow]

On 09/10/2015 07:09 PM, John Snow wrote:
> We don't have any CDROM tests yet.
> So, add some for the PCI/BMDMA HBA.
> 
> ===
> v2:
> ===
> 
>  - Some readability feedback from Markus
>  - Added an IRQ poll for the DRQ read loop
> 
> ________________________________________________________________________________
> 
> For convenience, this branch is available at:
> https://github.com/jnsnow/qemu.git branch ide-atapi-test
> https://github.com/jnsnow/qemu/tree/ide-atapi-test
> 
> This version is tagged ide-atapi-test-v2:
> https://github.com/jnsnow/qemu/releases/tag/ide-atapi-test-v2
> 
> John Snow (4):
>   qtest/ahci: use generate_pattern everywhere
>   qtest/ahci: export generate_pattern
>   ide-test: add cdrom pio test
>   ide-test: add cdrom dma test
> 
>  tests/ahci-test.c     |  43 +--------
>  tests/ide-test.c      | 245 ++++++++++++++++++++++++++++++++++++++++++++++----
>  tests/libqos/libqos.c |  26 ++++++
>  tests/libqos/libqos.h |   1 +
>  4 files changed, 258 insertions(+), 57 deletions(-)
> 

Thanks, applied to my IDE tree:

https://github.com/jnsnow/qemu/commits/ide
https://github.com/jnsnow/qemu.git

--js