* [PATCH 1/2] ARM: dts: support Highspeed for rk3188-radxarock
@ 2015-09-11 7:24 ` Shawn Lin
0 siblings, 0 replies; 9+ messages in thread
From: Shawn Lin @ 2015-09-11 7:24 UTC (permalink / raw)
To: Heiko Stuebner
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Shawn Lin,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add cap-sd-highspeed and cap-mmc-highspeed for rk3188-radxarock
board to make sd cards running faster.
Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
arch/arm/boot/dts/rk3188-radxarock.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index d2180e5..2f37ea7 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -287,7 +287,8 @@
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
-
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
bus-width = <4>;
disable-wp;
};
--
2.3.7
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 1/2] ARM: dts: support Highspeed for rk3188-radxarock
@ 2015-09-11 7:24 ` Shawn Lin
0 siblings, 0 replies; 9+ messages in thread
From: Shawn Lin @ 2015-09-11 7:24 UTC (permalink / raw)
To: Heiko Stuebner; +Cc: linux-arm-kernel, linux-rockchip, linux-kernel, Shawn Lin
Add cap-sd-highspeed and cap-mmc-highspeed for rk3188-radxarock
board to make sd cards running faster.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
arch/arm/boot/dts/rk3188-radxarock.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index d2180e5..2f37ea7 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -287,7 +287,8 @@
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
-
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
bus-width = <4>;
disable-wp;
};
--
2.3.7
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 1/2] ARM: dts: support Highspeed for rk3188-radxarock
@ 2015-09-11 7:24 ` Shawn Lin
0 siblings, 0 replies; 9+ messages in thread
From: Shawn Lin @ 2015-09-11 7:24 UTC (permalink / raw)
To: linux-arm-kernel
Add cap-sd-highspeed and cap-mmc-highspeed for rk3188-radxarock
board to make sd cards running faster.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
arch/arm/boot/dts/rk3188-radxarock.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index d2180e5..2f37ea7 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -287,7 +287,8 @@
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
-
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
bus-width = <4>;
disable-wp;
};
--
2.3.7
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] ARM: dts: support Highspeed for rk3066a platform
2015-09-11 7:24 ` Shawn Lin
@ 2015-09-11 7:25 ` Shawn Lin
-1 siblings, 0 replies; 9+ messages in thread
From: Shawn Lin @ 2015-09-11 7:25 UTC (permalink / raw)
To: Heiko Stuebner; +Cc: linux-arm-kernel, linux-rockchip, linux-kernel, Shawn Lin
Add cap-sd-highspeed and cap-mmc-highspeed for rk3066a
platform to make sd cards running faster.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
arch/arm/boot/dts/rk3066a.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 946f187..b50a785 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -595,6 +595,8 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
&mmc1 {
--
2.3.7
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/2] ARM: dts: support Highspeed for rk3066a platform
@ 2015-09-11 7:25 ` Shawn Lin
0 siblings, 0 replies; 9+ messages in thread
From: Shawn Lin @ 2015-09-11 7:25 UTC (permalink / raw)
To: linux-arm-kernel
Add cap-sd-highspeed and cap-mmc-highspeed for rk3066a
platform to make sd cards running faster.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
arch/arm/boot/dts/rk3066a.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 946f187..b50a785 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -595,6 +595,8 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
&mmc1 {
--
2.3.7
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: support Highspeed for rk3066a platform
2015-09-11 7:25 ` Shawn Lin
@ 2015-09-11 22:45 ` Heiko Stübner
-1 siblings, 0 replies; 9+ messages in thread
From: Heiko Stübner @ 2015-09-11 22:45 UTC (permalink / raw)
To: Shawn Lin; +Cc: linux-arm-kernel, linux-rockchip, linux-kernel
Hi Shawn,
Am Freitag, 11. September 2015, 15:25:41 schrieb Shawn Lin:
> Add cap-sd-highspeed and cap-mmc-highspeed for rk3066a
> platform to make sd cards running faster.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
>
> arch/arm/boot/dts/rk3066a.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
> index 946f187..b50a785 100644
> --- a/arch/arm/boot/dts/rk3066a.dtsi
> +++ b/arch/arm/boot/dts/rk3066a.dtsi
> @@ -595,6 +595,8 @@
> &mmc0 {
> pinctrl-names = "default";
> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> };
>
Currently we're setting the dw_mmc capabilities in the individual board files
and patch1 also correctly adds the cap to the radxarock file.
So I'd think we should stay with one scheme and probably add the rk3066 caps
to the bqcurie2, marsboard and rayeager where applicable.
Heiko
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH 2/2] ARM: dts: support Highspeed for rk3066a platform
@ 2015-09-11 22:45 ` Heiko Stübner
0 siblings, 0 replies; 9+ messages in thread
From: Heiko Stübner @ 2015-09-11 22:45 UTC (permalink / raw)
To: linux-arm-kernel
Hi Shawn,
Am Freitag, 11. September 2015, 15:25:41 schrieb Shawn Lin:
> Add cap-sd-highspeed and cap-mmc-highspeed for rk3066a
> platform to make sd cards running faster.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
>
> arch/arm/boot/dts/rk3066a.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
> index 946f187..b50a785 100644
> --- a/arch/arm/boot/dts/rk3066a.dtsi
> +++ b/arch/arm/boot/dts/rk3066a.dtsi
> @@ -595,6 +595,8 @@
> &mmc0 {
> pinctrl-names = "default";
> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> };
>
Currently we're setting the dw_mmc capabilities in the individual board files
and patch1 also correctly adds the cap to the radxarock file.
So I'd think we should stay with one scheme and probably add the rk3066 caps
to the bqcurie2, marsboard and rayeager where applicable.
Heiko
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: support Highspeed for rk3066a platform
2015-09-11 22:45 ` Heiko Stübner
@ 2015-09-11 23:44 ` Shawn Lin
-1 siblings, 0 replies; 9+ messages in thread
From: Shawn Lin @ 2015-09-11 23:44 UTC (permalink / raw)
To: Heiko Stübner
Cc: shawn.lin, linux-arm-kernel, linux-rockchip, linux-kernel
在 2015/9/12 6:45, Heiko Stübner 写道:
> Hi Shawn,
>
> Am Freitag, 11. September 2015, 15:25:41 schrieb Shawn Lin:
>> Add cap-sd-highspeed and cap-mmc-highspeed for rk3066a
>> platform to make sd cards running faster.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>> ---
>>
>> arch/arm/boot/dts/rk3066a.dtsi | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
>> index 946f187..b50a785 100644
>> --- a/arch/arm/boot/dts/rk3066a.dtsi
>> +++ b/arch/arm/boot/dts/rk3066a.dtsi
>> @@ -595,6 +595,8 @@
>> &mmc0 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
>> + cap-mmc-highspeed;
>> + cap-sd-highspeed;
>> };
>>
>
> Currently we're setting the dw_mmc capabilities in the individual board files
> and patch1 also correctly adds the cap to the radxarock file.
>
Thanks, Heiko. :)
Right, I was condering add caps in rk3066a for all boards which include
it or for each individual board. Unfortunately, I chose the wrong one.:(
Done in the v2.
> So I'd think we should stay with one scheme and probably add the rk3066 caps
> to the bqcurie2, marsboard and rayeager where applicable.
>
>
> Heiko
>
>
>
--
Best Regards
Shawn Lin
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH 2/2] ARM: dts: support Highspeed for rk3066a platform
@ 2015-09-11 23:44 ` Shawn Lin
0 siblings, 0 replies; 9+ messages in thread
From: Shawn Lin @ 2015-09-11 23:44 UTC (permalink / raw)
To: linux-arm-kernel
? 2015/9/12 6:45, Heiko St?bner ??:
> Hi Shawn,
>
> Am Freitag, 11. September 2015, 15:25:41 schrieb Shawn Lin:
>> Add cap-sd-highspeed and cap-mmc-highspeed for rk3066a
>> platform to make sd cards running faster.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>> ---
>>
>> arch/arm/boot/dts/rk3066a.dtsi | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
>> index 946f187..b50a785 100644
>> --- a/arch/arm/boot/dts/rk3066a.dtsi
>> +++ b/arch/arm/boot/dts/rk3066a.dtsi
>> @@ -595,6 +595,8 @@
>> &mmc0 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
>> + cap-mmc-highspeed;
>> + cap-sd-highspeed;
>> };
>>
>
> Currently we're setting the dw_mmc capabilities in the individual board files
> and patch1 also correctly adds the cap to the radxarock file.
>
Thanks, Heiko. :)
Right, I was condering add caps in rk3066a for all boards which include
it or for each individual board. Unfortunately, I chose the wrong one.:(
Done in the v2.
> So I'd think we should stay with one scheme and probably add the rk3066 caps
> to the bqcurie2, marsboard and rayeager where applicable.
>
>
> Heiko
>
>
>
--
Best Regards
Shawn Lin
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-09-11 23:44 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-11 7:24 [PATCH 1/2] ARM: dts: support Highspeed for rk3188-radxarock Shawn Lin
2015-09-11 7:24 ` Shawn Lin
2015-09-11 7:24 ` Shawn Lin
2015-09-11 7:25 ` [PATCH 2/2] ARM: dts: support Highspeed for rk3066a platform Shawn Lin
2015-09-11 7:25 ` Shawn Lin
2015-09-11 22:45 ` Heiko Stübner
2015-09-11 22:45 ` Heiko Stübner
2015-09-11 23:44 ` Shawn Lin
2015-09-11 23:44 ` Shawn Lin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.