From: "Tycho Lürsen" <tycholursen@gmail.com>
To: Torbjorn Jansson <torbjorn.jansson@mbox200.swipnet.se>,
Jurgen Kramer <gtmkramer@xs4all.nl>,
linux-media@vger.kernel.org
Subject: Re: DVBSky T980C CI issues (kernel 4.0.x)
Date: Sat, 12 Sep 2015 07:48:25 +0200 [thread overview]
Message-ID: <55F3BCA9.1060505@gmail.com> (raw)
In-Reply-To: <55F332FE.7040201@mbox200.swipnet.se>
[-- Attachment #1: Type: text/plain, Size: 1657 bytes --]
Op 11-09-15 om 22:01 schreef Torbjorn Jansson:
>
> did you get it to work?
>
> i got a dvbsky T980C too for dvb-t2 reception and so far the only
> drivers that have worked at all is the ones from dvbsky directly.
>
> i was very happy when i noticed that recent kernels have support for
> it built in but unfortunately only the modules and firmware loads but
> then nothing actually works.
> i use mythtv and it complains a lot about the signal, running femon
> also produces lots of errors.
>
> so i had to switch back to kernel 4.0.4 with mediabuild from dvbsky.
>
> if there were any other dvb-t2 card with ci support that had better
> drivers i would change right away.
>
> one problem i have with the mediabuilt from dvbsky is that at boot the
> cam never works and i have to first tune a channel, then remove and
> reinstert the cam to get it to work.
> without that nothing works.
>
> and finally a problem i ran into when i tried mediabuilt from
> linuxtv.org.
> fedora uses kernel modules with .ko.xz extension so when you install
> the mediabuilt modulels you get one modulename.ko and one modulename.ko.xz
>
> before a make install from mediabuild overwrote the needed modules.
> any advice on how to handle this now?
You could patch the Makefile with a patch from Oliver Endriss (attached).
This way all modules get installed in /lib/modules/`uname -r`/updates/media
If your kernel needs it, you can compress them afterwards.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
[-- Attachment #2: v4l-make-install.patch --]
[-- Type: text/x-patch, Size: 1060 bytes --]
--- v4l/Makefile 2013-11-27 16:15:21.528260850 +0100
+++ v4l/Makefile 2013-11-27 16:24:37.171815316 +0100
@@ -154,6 +154,7 @@
PWD := $(shell pwd)
DEST := /lib/modules/$(KERNELRELEASE)/v4l2
KDIR26 := /lib/modules/$(KERNELRELEASE)/kernel/drivers/media
+INSTDIR := $(DESTDIR)/lib/modules/$(KERNELRELEASE)/updates/media
#################################################
# Compiler fixup rules
@@ -202,9 +203,18 @@
#################################################
# installation invocation rules
-modules_install install:: media-install firmware_install
-
-remove rminstall:: media-rminstall
+modules_install install:: rminstall firmware_install
+ install -d -v $(INSTDIR)
+ @for i in *.ko; do \
+ echo "install $$i -> $(INSTDIR)/"; \
+ install -p -m 644 $$i $(INSTDIR); \
+ done;
+ strip --strip-debug $(INSTDIR)/*.ko
+ /sbin/depmod -a $(KERNELRELEASE) $(if $(DESTDIR),-b $(DESTDIR))
+
+remove rminstall::
+ @rm -Rfv $(INSTDIR)
+ /sbin/depmod -a $(KERNELRELEASE) $(if $(DESTDIR),-b $(DESTDIR))
firmware_install::
make -C firmware install
next prev parent reply other threads:[~2015-09-12 5:48 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-12 10:38 DVBSky T980C CI issues (kernel 4.0.x) Jurgen Kramer
2015-08-23 17:50 ` Jurgen Kramer
2015-09-11 20:01 ` Torbjorn Jansson
2015-09-12 5:48 ` Tycho Lürsen [this message]
2015-09-12 7:02 ` Jurgen Kramer
2016-01-28 17:26 ` Olli Salonen
2016-01-28 18:57 ` Jurgen Kramer
2016-01-28 19:42 ` Olli Salonen
2016-01-31 8:55 ` Torbjorn Jansson
2016-02-16 20:20 ` Olli Salonen
2016-02-16 23:12 ` Torbjorn Jansson
2016-02-17 6:24 ` Olli Salonen
2016-02-17 13:42 ` Olli Salonen
2016-02-17 21:54 ` Torbjorn Jansson
2016-02-17 22:15 ` Torbjorn Jansson
2016-02-18 5:56 ` Olli Salonen
2016-02-18 7:56 ` Torbjorn Jansson
2016-02-17 16:55 ` Jurgen Kramer
2016-02-20 15:57 ` Torbjorn Jansson
2016-02-20 17:20 ` Jurgen Kramer
2016-02-20 17:40 ` Torbjorn Jansson
2016-03-03 11:02 ` Olli Salonen
2016-03-03 18:22 ` Torbjorn Jansson
[not found] ` <56D8B3A1.9030001@mbox200.swipnet.se>
[not found] ` <56D8B4A2.2090402@mbox200.swipnet.se>
[not found] ` <CAAZRmGxceZmWrvGbKgnPTUc0jyy0npC4cW1d225bo8oE3E7sgg@mail.gmail.com>
2016-03-04 23:07 ` Torbjorn Jansson
[not found] ` <CAAZRmGyOxfANyZ884id5ZdTwyG2sfV1AE1KjSmaH1HHBrhmByg@mail.gmail.com>
2016-03-05 8:18 ` Torbjorn Jansson
2016-06-06 11:30 ` Torbjorn Jansson
2017-07-17 8:38 ` Torbjorn Jansson
2016-03-04 8:15 ` Jurgen Kramer
2016-03-04 8:28 ` Olli Salonen
2016-03-04 12:07 ` Jurgen Kramer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55F3BCA9.1060505@gmail.com \
--to=tycholursen@gmail.com \
--cc=gtmkramer@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=torbjorn.jansson@mbox200.swipnet.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.