All of lore.kernel.org
 help / color / mirror / Atom feed
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] irqchip: atmel-aic5: fix bug with mask/unmask
Date: Tue, 22 Sep 2015 10:27:19 +0200	[thread overview]
Message-ID: <560110E7.50306@atmel.com> (raw)
In-Reply-To: <1442843173-2390-1-git-send-email-ludovic.desroches@atmel.com>

Le 21/09/2015 15:46, Ludovic Desroches a ?crit :
> When masking/unmasking interrupts, mask_cache is updated and used later
> for suspend/resume. Unfortunately, it always was the mask_cache
> associated with the first irq chip which was updated. So when performing
> resume, only irqs 0-31 could be enabled and maybe not the good ones!
> 
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> Fixes: b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers")
> Cc: stable at vger.kernel.org #3.18

Pretty important fix indeed!

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>


Thomas, Jason, can we please have this series queued for the 4.3-rc phase?

Bye,


> ---
> 
> Sasha,
> 
> This fix won't apply without conflicts because of irq_reg_writel changes. I
> can provide you a fix for 3.18 if you need.
> 
> Regards
> 
> Ludovic
> 
> 
>  drivers/irqchip/irq-atmel-aic5.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-atmel-aic5.c b/drivers/irqchip/irq-atmel-aic5.c
> index 9da9942..6c5fd25 100644
> --- a/drivers/irqchip/irq-atmel-aic5.c
> +++ b/drivers/irqchip/irq-atmel-aic5.c
> @@ -88,28 +88,30 @@ static void aic5_mask(struct irq_data *d)
>  {
>  	struct irq_domain *domain = d->domain;
>  	struct irq_domain_chip_generic *dgc = domain->gc;
> -	struct irq_chip_generic *gc = dgc->gc[0];
> +	struct irq_chip_generic *bgc = dgc->gc[0];
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
>  
>  	/* Disable interrupt on AIC5 */
> -	irq_gc_lock(gc);
> +	irq_gc_lock(bgc);
>  	irq_reg_writel(gc, d->hwirq, AT91_AIC5_SSR);
>  	irq_reg_writel(gc, 1, AT91_AIC5_IDCR);
>  	gc->mask_cache &= ~d->mask;
> -	irq_gc_unlock(gc);
> +	irq_gc_unlock(bgc);
>  }
>  
>  static void aic5_unmask(struct irq_data *d)
>  {
>  	struct irq_domain *domain = d->domain;
>  	struct irq_domain_chip_generic *dgc = domain->gc;
> -	struct irq_chip_generic *gc = dgc->gc[0];
> +	struct irq_chip_generic *bgc = dgc->gc[0];
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
>  
>  	/* Enable interrupt on AIC5 */
> -	irq_gc_lock(gc);
> +	irq_gc_lock(bgc);
>  	irq_reg_writel(gc, d->hwirq, AT91_AIC5_SSR);
>  	irq_reg_writel(gc, 1, AT91_AIC5_IECR);
>  	gc->mask_cache |= d->mask;
> -	irq_gc_unlock(gc);
> +	irq_gc_unlock(bgc);
>  }
>  
>  static int aic5_retrigger(struct irq_data *d)
> 


-- 
Nicolas Ferre

WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Ludovic Desroches <ludovic.desroches@atmel.com>,
	<tglx@linutronix.de>, <jason@lakedaemon.net>,
	<marc.zyngier@arm.com>
Cc: <linux-kernel@vger.kernel.org>, <sasha.levin@oracle.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<alexandre.belloni@free-electrons.com>,
	<boris.brezillon@free-electrons.com>, <Wenyou.Yang@atmel.com>
Subject: Re: [PATCH 1/3] irqchip: atmel-aic5: fix bug with mask/unmask
Date: Tue, 22 Sep 2015 10:27:19 +0200	[thread overview]
Message-ID: <560110E7.50306@atmel.com> (raw)
In-Reply-To: <1442843173-2390-1-git-send-email-ludovic.desroches@atmel.com>

Le 21/09/2015 15:46, Ludovic Desroches a écrit :
> When masking/unmasking interrupts, mask_cache is updated and used later
> for suspend/resume. Unfortunately, it always was the mask_cache
> associated with the first irq chip which was updated. So when performing
> resume, only irqs 0-31 could be enabled and maybe not the good ones!
> 
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> Fixes: b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers")
> Cc: stable@vger.kernel.org #3.18

Pretty important fix indeed!

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>


Thomas, Jason, can we please have this series queued for the 4.3-rc phase?

Bye,


> ---
> 
> Sasha,
> 
> This fix won't apply without conflicts because of irq_reg_writel changes. I
> can provide you a fix for 3.18 if you need.
> 
> Regards
> 
> Ludovic
> 
> 
>  drivers/irqchip/irq-atmel-aic5.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-atmel-aic5.c b/drivers/irqchip/irq-atmel-aic5.c
> index 9da9942..6c5fd25 100644
> --- a/drivers/irqchip/irq-atmel-aic5.c
> +++ b/drivers/irqchip/irq-atmel-aic5.c
> @@ -88,28 +88,30 @@ static void aic5_mask(struct irq_data *d)
>  {
>  	struct irq_domain *domain = d->domain;
>  	struct irq_domain_chip_generic *dgc = domain->gc;
> -	struct irq_chip_generic *gc = dgc->gc[0];
> +	struct irq_chip_generic *bgc = dgc->gc[0];
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
>  
>  	/* Disable interrupt on AIC5 */
> -	irq_gc_lock(gc);
> +	irq_gc_lock(bgc);
>  	irq_reg_writel(gc, d->hwirq, AT91_AIC5_SSR);
>  	irq_reg_writel(gc, 1, AT91_AIC5_IDCR);
>  	gc->mask_cache &= ~d->mask;
> -	irq_gc_unlock(gc);
> +	irq_gc_unlock(bgc);
>  }
>  
>  static void aic5_unmask(struct irq_data *d)
>  {
>  	struct irq_domain *domain = d->domain;
>  	struct irq_domain_chip_generic *dgc = domain->gc;
> -	struct irq_chip_generic *gc = dgc->gc[0];
> +	struct irq_chip_generic *bgc = dgc->gc[0];
> +	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
>  
>  	/* Enable interrupt on AIC5 */
> -	irq_gc_lock(gc);
> +	irq_gc_lock(bgc);
>  	irq_reg_writel(gc, d->hwirq, AT91_AIC5_SSR);
>  	irq_reg_writel(gc, 1, AT91_AIC5_IECR);
>  	gc->mask_cache |= d->mask;
> -	irq_gc_unlock(gc);
> +	irq_gc_unlock(bgc);
>  }
>  
>  static int aic5_retrigger(struct irq_data *d)
> 


-- 
Nicolas Ferre

  parent reply	other threads:[~2015-09-22  8:27 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-21 13:46 [PATCH 1/3] irqchip: atmel-aic5: fix bug with mask/unmask Ludovic Desroches
2015-09-21 13:46 ` Ludovic Desroches
2015-09-21 13:46 ` [PATCH 2/3] irqchip: atmel-aic5: fix variable naming Ludovic Desroches
2015-09-21 13:46   ` Ludovic Desroches
2015-09-22  8:27   ` Nicolas Ferre
2015-09-22  8:27     ` Nicolas Ferre
2015-09-22 14:09   ` [tip:irq/core] irqchip/atmel-aic5: Use explicit variable name for the base chip tip-bot for Ludovic Desroches
2015-09-21 13:46 ` [PATCH 3/3] irqchip: atmel-aic5: simplify base chip selection Ludovic Desroches
2015-09-21 13:46   ` Ludovic Desroches
2015-09-22  8:27   ` Nicolas Ferre
2015-09-22  8:27     ` Nicolas Ferre
2015-09-22 14:09   ` [tip:irq/core] irqchip/atmel-aic5: Simplify " tip-bot for Ludovic Desroches
2015-09-22  7:45 ` [PATCH 1/3] irqchip: atmel-aic5: fix bug with mask/unmask Boris Brezillon
2015-09-22  7:45   ` Boris Brezillon
2015-09-22  8:27 ` Nicolas Ferre [this message]
2015-09-22  8:27   ` Nicolas Ferre
2015-09-22 10:27 ` Thomas Gleixner
2015-09-22 10:27   ` Thomas Gleixner
2015-09-22 11:55   ` Boris Brezillon
2015-09-22 11:55     ` Boris Brezillon
2015-09-22 13:50     ` Thomas Gleixner
2015-09-22 13:50       ` Thomas Gleixner
2015-09-22 14:07       ` Ludovic Desroches
2015-09-22 14:07         ` Ludovic Desroches
2015-09-22 10:30 ` [tip:irq/urgent] irqchip/atmel-aic5: Use proper mask cache in mask/unmask() tip-bot for Ludovic Desroches
2015-09-22 10:37   ` Thomas Gleixner
2015-09-22 10:37     ` Thomas Gleixner
2015-09-22 14:00 ` [tip:irq/urgent] irqchip/atmel-aic5: Use per chip mask caches " tip-bot for Ludovic Desroches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=560110E7.50306@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.