From: Matthias Brugger <matthias.bgg@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>,
Henry Chen <henryc.chen@mediatek.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] soc: mediatek: Move the initial setting of pmic wrap interrupt before requesting irq.
Date: Sun, 27 Sep 2015 13:56:52 +0200 [thread overview]
Message-ID: <5607D984.50203@gmail.com> (raw)
In-Reply-To: <20150923134506.GA7825@pengutronix.de>
On 23/09/15 15:45, Sascha Hauer wrote:
> On Fri, Sep 11, 2015 at 09:05:20PM +0800, Henry Chen wrote:
>> The watchdog may not be initialized by the bootloader, even if the rest
>> of the pwrap is. Move the watchdog initialization out of pwrap_init() to
>> make sure the watchdog is always initialized and not only when the pwrap
>> is uninitialized.
>>
>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
>
> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Applied, thanks.
>
>
>> ---
>> Chandes since v1:
>> Modify the commit log and code comments to make it easy to understand
>> the issue and solution.
>> ---
>> drivers/soc/mediatek/mtk-pmic-wrap.c | 10 ++++++----
>> 1 file changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
>> index f432291..1a49b09 100644
>> --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
>> +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
>> @@ -725,10 +725,6 @@ static int pwrap_init(struct pmic_wrapper *wrp)
>> pwrap_writel(wrp, 0x1, PWRAP_WACS2_EN);
>> pwrap_writel(wrp, 0x5, PWRAP_STAUPD_PRD);
>> pwrap_writel(wrp, 0xff, PWRAP_STAUPD_GRPEN);
>> - pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
>> - pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN);
>> - pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
>> - pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN);
>>
>> if (pwrap_is_mt8135(wrp)) {
>> /* enable pwrap events and pwrap bridge in AP side */
>> @@ -896,6 +892,12 @@ static int pwrap_probe(struct platform_device *pdev)
>> return -ENODEV;
>> }
>>
>> + /* Initialize watchdog, may not be done by the bootloader */
>> + pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
>> + pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN);
>> + pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
>> + pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN);
>> +
>> irq = platform_get_irq(pdev, 0);
>> ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt, IRQF_TRIGGER_HIGH,
>> "mt-pmic-pwrap", wrp);
>> --
>> 1.8.1.1.dirty
>>
>>
>
WARNING: multiple messages have this Message-ID (diff)
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] soc: mediatek: Move the initial setting of pmic wrap interrupt before requesting irq.
Date: Sun, 27 Sep 2015 13:56:52 +0200 [thread overview]
Message-ID: <5607D984.50203@gmail.com> (raw)
In-Reply-To: <20150923134506.GA7825@pengutronix.de>
On 23/09/15 15:45, Sascha Hauer wrote:
> On Fri, Sep 11, 2015 at 09:05:20PM +0800, Henry Chen wrote:
>> The watchdog may not be initialized by the bootloader, even if the rest
>> of the pwrap is. Move the watchdog initialization out of pwrap_init() to
>> make sure the watchdog is always initialized and not only when the pwrap
>> is uninitialized.
>>
>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
>
> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Applied, thanks.
>
>
>> ---
>> Chandes since v1:
>> Modify the commit log and code comments to make it easy to understand
>> the issue and solution.
>> ---
>> drivers/soc/mediatek/mtk-pmic-wrap.c | 10 ++++++----
>> 1 file changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
>> index f432291..1a49b09 100644
>> --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
>> +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
>> @@ -725,10 +725,6 @@ static int pwrap_init(struct pmic_wrapper *wrp)
>> pwrap_writel(wrp, 0x1, PWRAP_WACS2_EN);
>> pwrap_writel(wrp, 0x5, PWRAP_STAUPD_PRD);
>> pwrap_writel(wrp, 0xff, PWRAP_STAUPD_GRPEN);
>> - pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
>> - pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN);
>> - pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
>> - pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN);
>>
>> if (pwrap_is_mt8135(wrp)) {
>> /* enable pwrap events and pwrap bridge in AP side */
>> @@ -896,6 +892,12 @@ static int pwrap_probe(struct platform_device *pdev)
>> return -ENODEV;
>> }
>>
>> + /* Initialize watchdog, may not be done by the bootloader */
>> + pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
>> + pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN);
>> + pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
>> + pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN);
>> +
>> irq = platform_get_irq(pdev, 0);
>> ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt, IRQF_TRIGGER_HIGH,
>> "mt-pmic-pwrap", wrp);
>> --
>> 1.8.1.1.dirty
>>
>>
>
next prev parent reply other threads:[~2015-09-27 11:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-11 13:05 [PATCH v2] soc: mediatek: Move the initial setting of pmic wrap interrupt before requesting irq Henry Chen
2015-09-11 13:05 ` Henry Chen
2015-09-11 13:05 ` Henry Chen
2015-09-23 13:45 ` Sascha Hauer
2015-09-23 13:45 ` Sascha Hauer
2015-09-27 11:56 ` Matthias Brugger [this message]
2015-09-27 11:56 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5607D984.50203@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=henryc.chen@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.