* CT 4.2 kernel now supports 80Mhz IBSS @ 2015-09-23 23:56 Ben Greear 2015-09-25 6:48 ` Jorge Baranda 0 siblings, 1 reply; 8+ messages in thread From: Ben Greear @ 2015-09-23 23:56 UTC (permalink / raw) To: ath10k I forget exactly all who was asking for this...but hopefully they are reading this list... I was missing a patch that allowed HT80 IBSS in my 4.2. The beta-15 CT firmware appears to do HT80 IBSS just fine with the 4.2 kernel now. I have not attempted to enable this feature on my 4.0 kernel yet. Please also note, I've been hacking on rate-ctrl logic in both 4.0 and 4.2 kernels (and beta-15 firmware)..so if you try it and find something weird, especially in probe requests or association requests, please do let me know. Notes of success are welcome as well of course! http://www.candelatech.com/ath10k.php http://dmz2.candelatech.com/git/gitweb.cgi Thanks, Ben -- Ben Greear <greearb@candelatech.com> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: CT 4.2 kernel now supports 80Mhz IBSS 2015-09-23 23:56 CT 4.2 kernel now supports 80Mhz IBSS Ben Greear @ 2015-09-25 6:48 ` Jorge Baranda 2015-09-25 7:47 ` Harms, Hannes 0 siblings, 1 reply; 8+ messages in thread From: Jorge Baranda @ 2015-09-25 6:48 UTC (permalink / raw) To: ath10k, Ben Greear Hi Ben, I imagine, I am one of the guys you are refering to. Within the thread "WLE600VX from PCEngines", I was trying to make working a HT80 IBSS connection with wpa_supplicant, but this connection was only set to 20MHz. I was trying this with the 4.0 kernel, the 10.1.467-ct-14 firmware and the last version (git) of wpa_supplicant (2.5). By the way, has anyone tried this? Then, due to this failure, I tried kernel 4.2 because Hannes Harm reported success to set HT80 IBSS. But I was not able to configure properly this kernel (compile OK, but the computer does not boot then). @Ben, could you share a .config file for kernel 4.2? Do you think that Release14 CT firmware would be able to work? I will update the 4.2 kernel, compile it and try to see if I can set up the HT80 IBSS connection. Thanks, Jorge El 24/09/15 01:56, Ben Greear escribió: > I forget exactly all who was asking for this...but hopefully > they are reading this list... > > I was missing a patch that allowed HT80 IBSS in my 4.2. > > The beta-15 CT firmware appears to do HT80 IBSS just fine > with the 4.2 kernel now. > > I have not attempted to enable this feature on my 4.0 kernel yet. > > Please also note, I've been hacking on rate-ctrl logic in both 4.0 > and 4.2 kernels (and beta-15 firmware)..so if you try it and find > something weird, especially in probe requests or association requests, > please do let me know. Notes of success are welcome as well of course! > > http://www.candelatech.com/ath10k.php > > http://dmz2.candelatech.com/git/gitweb.cgi > > Thanks, > Ben > -- Jorge Baranda Research Engineer, MSc jorge.baranda@cttc.es Centre Tecnològic de Telecomunicacions de Catalunya (CTTC) Av. Carl Friedrich Gauss, 7 08860 Castelldefels, Barcelona (Spain) Tel: +34 93 645 29 00 Ext: 2171 Fax. +34 93 645 29 01 www.cttc.es _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: CT 4.2 kernel now supports 80Mhz IBSS 2015-09-25 6:48 ` Jorge Baranda @ 2015-09-25 7:47 ` Harms, Hannes 2015-09-25 7:56 ` Jorge Baranda 0 siblings, 1 reply; 8+ messages in thread From: Harms, Hannes @ 2015-09-25 7:47 UTC (permalink / raw) To: ath10k Hi, yes, I was able to get 80 MHz IBSS working with CT 4.2 , but I also integrated the missing patch to my kernel even before Ben mentioned that the patch was missing. I also forgot that I made this change, sorry Regards Hannes Am 25.09.2015 um 08:48 schrieb Jorge Baranda: > Hi Ben, > > I imagine, I am one of the guys you are refering to. > Within the thread "WLE600VX from PCEngines", I was trying to make > working a HT80 IBSS connection with wpa_supplicant, but this > connection was only set to 20MHz. > I was trying this with the 4.0 kernel, the 10.1.467-ct-14 firmware and > the last version (git) of wpa_supplicant (2.5). By the way, has anyone > tried this? > > Then, due to this failure, I tried kernel 4.2 because Hannes Harm > reported success to set HT80 IBSS. But I was not able to configure > properly this kernel (compile OK, but the computer does not boot then). > > @Ben, could you share a .config file for kernel 4.2? Do you think that > Release14 CT firmware would be able to work? I will update the 4.2 > kernel, compile it and try to see > if I can set up the HT80 IBSS connection. > > Thanks, > > Jorge > > > El 24/09/15 01:56, Ben Greear escribió: >> I forget exactly all who was asking for this...but hopefully >> they are reading this list... >> >> I was missing a patch that allowed HT80 IBSS in my 4.2. >> >> The beta-15 CT firmware appears to do HT80 IBSS just fine >> with the 4.2 kernel now. >> >> I have not attempted to enable this feature on my 4.0 kernel yet. >> >> Please also note, I've been hacking on rate-ctrl logic in both 4.0 >> and 4.2 kernels (and beta-15 firmware)..so if you try it and find >> something weird, especially in probe requests or association requests, >> please do let me know. Notes of success are welcome as well of course! >> >> http://www.candelatech.com/ath10k.php >> >> http://dmz2.candelatech.com/git/gitweb.cgi >> >> Thanks, >> Ben >> > > -- Dipl.-Ing. Hannes Harms Technische Universität Braunschweig Institut für mobile Maschinen und Nutzfahrzeuge Langer Kamp 19a D-38106 Braunschweig Durchwahl: +49 (0)531 391-7197 E-Mail: hannes.harms@tu-braunschweig.de http://www.tu-braunschweig.de/imn _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: CT 4.2 kernel now supports 80Mhz IBSS 2015-09-25 7:47 ` Harms, Hannes @ 2015-09-25 7:56 ` Jorge Baranda 2015-09-25 16:01 ` Ben Greear 0 siblings, 1 reply; 8+ messages in thread From: Jorge Baranda @ 2015-09-25 7:56 UTC (permalink / raw) To: ath10k, Harms, Hannes Hi Harms, Thank you very much for your aclaration. I was trying to follow your setup with the CT kernel 4.0, but with no success, so after the post of Ben, I imagine I have to install CT 4.2 kernel. By the way, I suppose that I have already this patch in my folder of the kernel 4.2 since I downloaded it from git (17/09/15) after you made your post. Just in case, could you point me out to the patch you are refering to? Other thing, which CT firmware are you using (mine Release14)? Additionally, could you share your .config file for the CT 4.2 kernel? I'm having some troubles to make this kernel running and I am a little confused. Thanks again, Jordi El 25/09/15 09:47, Harms, Hannes escribió: > Hi, > > yes, I was able to get 80 MHz IBSS working with CT 4.2 , but > I also integrated the missing patch to my kernel even before Ben > mentioned that the patch was missing. > I also forgot that I made this change, sorry > > Regards Hannes > > > Am 25.09.2015 um 08:48 schrieb Jorge Baranda: >> Hi Ben, >> >> I imagine, I am one of the guys you are refering to. >> Within the thread "WLE600VX from PCEngines", I was trying to make >> working a HT80 IBSS connection with wpa_supplicant, but this >> connection was only set to 20MHz. >> I was trying this with the 4.0 kernel, the 10.1.467-ct-14 firmware >> and the last version (git) of wpa_supplicant (2.5). By the way, has >> anyone tried this? >> >> Then, due to this failure, I tried kernel 4.2 because Hannes Harm >> reported success to set HT80 IBSS. But I was not able to configure >> properly this kernel (compile OK, but the computer does not boot then). >> >> @Ben, could you share a .config file for kernel 4.2? Do you think >> that Release14 CT firmware would be able to work? I will update the >> 4.2 kernel, compile it and try to see >> if I can set up the HT80 IBSS connection. >> >> Thanks, >> >> Jorge >> >> >> El 24/09/15 01:56, Ben Greear escribió: >>> I forget exactly all who was asking for this...but hopefully >>> they are reading this list... >>> >>> I was missing a patch that allowed HT80 IBSS in my 4.2. >>> >>> The beta-15 CT firmware appears to do HT80 IBSS just fine >>> with the 4.2 kernel now. >>> >>> I have not attempted to enable this feature on my 4.0 kernel yet. >>> >>> Please also note, I've been hacking on rate-ctrl logic in both 4.0 >>> and 4.2 kernels (and beta-15 firmware)..so if you try it and find >>> something weird, especially in probe requests or association requests, >>> please do let me know. Notes of success are welcome as well of course! >>> >>> http://www.candelatech.com/ath10k.php >>> >>> http://dmz2.candelatech.com/git/gitweb.cgi >>> >>> Thanks, >>> Ben >>> >> >> > -- Jorge Baranda Research Engineer, MSc jorge.baranda@cttc.es Centre Tecnològic de Telecomunicacions de Catalunya (CTTC) Av. Carl Friedrich Gauss, 7 08860 Castelldefels, Barcelona (Spain) Tel: +34 93 645 29 00 Ext: 2171 Fax. +34 93 645 29 01 www.cttc.es _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: CT 4.2 kernel now supports 80Mhz IBSS 2015-09-25 7:56 ` Jorge Baranda @ 2015-09-25 16:01 ` Ben Greear 2015-09-28 6:24 ` Jorge Baranda 0 siblings, 1 reply; 8+ messages in thread From: Ben Greear @ 2015-09-25 16:01 UTC (permalink / raw) To: Jorge Baranda, ath10k, Harms, Hannes On 09/25/2015 12:56 AM, Jorge Baranda wrote: > Hi Harms, > > Thank you very much for your aclaration. I was trying to follow your setup with the CT kernel 4.0, but with no success, so after the post of Ben, I imagine I > have to install CT 4.2 kernel. > By the way, I suppose that I have already this patch in my folder of the kernel 4.2 since I downloaded it from git (17/09/15) after you made your post. Just in > case, could you point me out to the patch you are refering to? > Other thing, which CT firmware are you using (mine Release14)? Additionally, could you share your .config file for the CT 4.2 kernel? I'm having some troubles > to make this kernel running and I am a little confused. Please grab the latest CT 4.2 kernel, I rebased the last 10 or so patches a day or two ago: # This first command blows away the first 20 commits, so if you have # added your own patches, then you need to deal with that properly. git reset --hard HEAD~20 git pull The configs I use are in ./configs/ In particular, the patch I added to enable HT80 IBSS was this: http://dmz2.candelatech.com/?p=linux-4.2.dev.y/.git;a=commit;h=c620066342699f63dcdd00ce5f4d0feb4f02b1fc Thanks, Ben > > Thanks again, > > Jordi > > > El 25/09/15 09:47, Harms, Hannes escribió: >> Hi, >> >> yes, I was able to get 80 MHz IBSS working with CT 4.2 , but >> I also integrated the missing patch to my kernel even before Ben mentioned that the patch was missing. >> I also forgot that I made this change, sorry >> >> Regards Hannes >> >> >> Am 25.09.2015 um 08:48 schrieb Jorge Baranda: >>> Hi Ben, >>> >>> I imagine, I am one of the guys you are refering to. >>> Within the thread "WLE600VX from PCEngines", I was trying to make working a HT80 IBSS connection with wpa_supplicant, but this connection was only set to 20MHz. >>> I was trying this with the 4.0 kernel, the 10.1.467-ct-14 firmware and the last version (git) of wpa_supplicant (2.5). By the way, has anyone tried this? >>> >>> Then, due to this failure, I tried kernel 4.2 because Hannes Harm reported success to set HT80 IBSS. But I was not able to configure properly this kernel >>> (compile OK, but the computer does not boot then). >>> >>> @Ben, could you share a .config file for kernel 4.2? Do you think that Release14 CT firmware would be able to work? I will update the 4.2 kernel, compile it >>> and try to see >>> if I can set up the HT80 IBSS connection. >>> >>> Thanks, >>> >>> Jorge >>> >>> >>> El 24/09/15 01:56, Ben Greear escribió: >>>> I forget exactly all who was asking for this...but hopefully >>>> they are reading this list... >>>> >>>> I was missing a patch that allowed HT80 IBSS in my 4.2. >>>> >>>> The beta-15 CT firmware appears to do HT80 IBSS just fine >>>> with the 4.2 kernel now. >>>> >>>> I have not attempted to enable this feature on my 4.0 kernel yet. >>>> >>>> Please also note, I've been hacking on rate-ctrl logic in both 4.0 >>>> and 4.2 kernels (and beta-15 firmware)..so if you try it and find >>>> something weird, especially in probe requests or association requests, >>>> please do let me know. Notes of success are welcome as well of course! >>>> >>>> http://www.candelatech.com/ath10k.php >>>> >>>> http://dmz2.candelatech.com/git/gitweb.cgi >>>> >>>> Thanks, >>>> Ben >>>> >>> >>> >> > > -- Ben Greear <greearb@candelatech.com> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: CT 4.2 kernel now supports 80Mhz IBSS 2015-09-25 16:01 ` Ben Greear @ 2015-09-28 6:24 ` Jorge Baranda 2015-09-28 7:27 ` Janusz Dziedzic 2015-09-28 13:02 ` Jorge Baranda 0 siblings, 2 replies; 8+ messages in thread From: Jorge Baranda @ 2015-09-28 6:24 UTC (permalink / raw) To: ath10k Hi Ben, Harms, Thank you very much for the information. I will try it. I hope I can set the link to 80MHz with the new kernel. Thanks again, Regards, Jordi El 25/09/2015 a las 18:01, Ben Greear escribió: > On 09/25/2015 12:56 AM, Jorge Baranda wrote: >> Hi Harms, >> >> Thank you very much for your aclaration. I was trying to follow your >> setup with the CT kernel 4.0, but with no success, so after the post >> of Ben, I imagine I >> have to install CT 4.2 kernel. >> By the way, I suppose that I have already this patch in my folder of >> the kernel 4.2 since I downloaded it from git (17/09/15) after you >> made your post. Just in >> case, could you point me out to the patch you are refering to? >> Other thing, which CT firmware are you using (mine Release14)? >> Additionally, could you share your .config file for the CT 4.2 >> kernel? I'm having some troubles >> to make this kernel running and I am a little confused. > > Please grab the latest CT 4.2 kernel, I rebased the last 10 or so > patches a day or two ago: > > # This first command blows away the first 20 commits, so if you have > # added your own patches, then you need to deal with that properly. > > git reset --hard HEAD~20 > git pull > > The configs I use are in ./configs/ > > In particular, the patch I added to enable HT80 IBSS was this: > > http://dmz2.candelatech.com/?p=linux-4.2.dev.y/.git;a=commit;h=c620066342699f63dcdd00ce5f4d0feb4f02b1fc > > > Thanks, > Ben > >> >> Thanks again, >> >> Jordi >> >> >> El 25/09/15 09:47, Harms, Hannes escribió: >>> Hi, >>> >>> yes, I was able to get 80 MHz IBSS working with CT 4.2 , but >>> I also integrated the missing patch to my kernel even before Ben >>> mentioned that the patch was missing. >>> I also forgot that I made this change, sorry >>> >>> Regards Hannes >>> >>> >>> Am 25.09.2015 um 08:48 schrieb Jorge Baranda: >>>> Hi Ben, >>>> >>>> I imagine, I am one of the guys you are refering to. >>>> Within the thread "WLE600VX from PCEngines", I was trying to make >>>> working a HT80 IBSS connection with wpa_supplicant, but this >>>> connection was only set to 20MHz. >>>> I was trying this with the 4.0 kernel, the 10.1.467-ct-14 firmware >>>> and the last version (git) of wpa_supplicant (2.5). By the way, has >>>> anyone tried this? >>>> >>>> Then, due to this failure, I tried kernel 4.2 because Hannes Harm >>>> reported success to set HT80 IBSS. But I was not able to configure >>>> properly this kernel >>>> (compile OK, but the computer does not boot then). >>>> >>>> @Ben, could you share a .config file for kernel 4.2? Do you think >>>> that Release14 CT firmware would be able to work? I will update the >>>> 4.2 kernel, compile it >>>> and try to see >>>> if I can set up the HT80 IBSS connection. >>>> >>>> Thanks, >>>> >>>> Jorge >>>> >>>> >>>> El 24/09/15 01:56, Ben Greear escribió: >>>>> I forget exactly all who was asking for this...but hopefully >>>>> they are reading this list... >>>>> >>>>> I was missing a patch that allowed HT80 IBSS in my 4.2. >>>>> >>>>> The beta-15 CT firmware appears to do HT80 IBSS just fine >>>>> with the 4.2 kernel now. >>>>> >>>>> I have not attempted to enable this feature on my 4.0 kernel yet. >>>>> >>>>> Please also note, I've been hacking on rate-ctrl logic in both 4.0 >>>>> and 4.2 kernels (and beta-15 firmware)..so if you try it and find >>>>> something weird, especially in probe requests or association >>>>> requests, >>>>> please do let me know. Notes of success are welcome as well of >>>>> course! >>>>> >>>>> http://www.candelatech.com/ath10k.php >>>>> >>>>> http://dmz2.candelatech.com/git/gitweb.cgi >>>>> >>>>> Thanks, >>>>> Ben >>>>> >>>> >>>> >>> >> >> > > -- Jorge Baranda Research Engineer, MSc jorge.baranda@cttc.es Centre Tecnològic de Telecomunicacions de Catalunya (CTTC) Av. Carl Friedrich Gauss, 7 08860 Castelldefels, Barcelona (Spain) Tel: +34 93 645 29 00 Ext: 2171 Fax. +34 93 645 29 01 www.cttc.es _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: CT 4.2 kernel now supports 80Mhz IBSS 2015-09-28 6:24 ` Jorge Baranda @ 2015-09-28 7:27 ` Janusz Dziedzic 2015-09-28 13:02 ` Jorge Baranda 1 sibling, 0 replies; 8+ messages in thread From: Janusz Dziedzic @ 2015-09-28 7:27 UTC (permalink / raw) To: Jorge Baranda; +Cc: ath10k@lists.infradead.org On 28 September 2015 at 08:24, Jorge Baranda <jorge.baranda@cttc.es> wrote: > Hi Ben, Harms, > > Thank you very much for the information. > I will try it. I hope I can set the link to 80MHz with the new kernel. > BTW, newest iw already support ibss and 80MHz - so you don't need wpa_supplicant anymore. BR Janusz > Thanks again, > > Regards, > > Jordi > > > El 25/09/2015 a las 18:01, Ben Greear escribió: >> >> On 09/25/2015 12:56 AM, Jorge Baranda wrote: >>> >>> Hi Harms, >>> >>> Thank you very much for your aclaration. I was trying to follow your >>> setup with the CT kernel 4.0, but with no success, so after the post of Ben, >>> I imagine I >>> have to install CT 4.2 kernel. >>> By the way, I suppose that I have already this patch in my folder of the >>> kernel 4.2 since I downloaded it from git (17/09/15) after you made your >>> post. Just in >>> case, could you point me out to the patch you are refering to? >>> Other thing, which CT firmware are you using (mine Release14)? >>> Additionally, could you share your .config file for the CT 4.2 kernel? I'm >>> having some troubles >>> to make this kernel running and I am a little confused. >> >> >> Please grab the latest CT 4.2 kernel, I rebased the last 10 or so patches >> a day or two ago: >> >> # This first command blows away the first 20 commits, so if you have >> # added your own patches, then you need to deal with that properly. >> >> git reset --hard HEAD~20 >> git pull >> >> The configs I use are in ./configs/ >> >> In particular, the patch I added to enable HT80 IBSS was this: >> >> >> http://dmz2.candelatech.com/?p=linux-4.2.dev.y/.git;a=commit;h=c620066342699f63dcdd00ce5f4d0feb4f02b1fc >> >> Thanks, >> Ben >> >>> >>> Thanks again, >>> >>> Jordi >>> >>> >>> El 25/09/15 09:47, Harms, Hannes escribió: >>>> >>>> Hi, >>>> >>>> yes, I was able to get 80 MHz IBSS working with CT 4.2 , but >>>> I also integrated the missing patch to my kernel even before Ben >>>> mentioned that the patch was missing. >>>> I also forgot that I made this change, sorry >>>> >>>> Regards Hannes >>>> >>>> >>>> Am 25.09.2015 um 08:48 schrieb Jorge Baranda: >>>>> >>>>> Hi Ben, >>>>> >>>>> I imagine, I am one of the guys you are refering to. >>>>> Within the thread "WLE600VX from PCEngines", I was trying to make >>>>> working a HT80 IBSS connection with wpa_supplicant, but this connection was >>>>> only set to 20MHz. >>>>> I was trying this with the 4.0 kernel, the 10.1.467-ct-14 firmware and >>>>> the last version (git) of wpa_supplicant (2.5). By the way, has anyone tried >>>>> this? >>>>> >>>>> Then, due to this failure, I tried kernel 4.2 because Hannes Harm >>>>> reported success to set HT80 IBSS. But I was not able to configure properly >>>>> this kernel >>>>> (compile OK, but the computer does not boot then). >>>>> >>>>> @Ben, could you share a .config file for kernel 4.2? Do you think that >>>>> Release14 CT firmware would be able to work? I will update the 4.2 kernel, >>>>> compile it >>>>> and try to see >>>>> if I can set up the HT80 IBSS connection. >>>>> >>>>> Thanks, >>>>> >>>>> Jorge >>>>> >>>>> >>>>> El 24/09/15 01:56, Ben Greear escribió: >>>>>> >>>>>> I forget exactly all who was asking for this...but hopefully >>>>>> they are reading this list... >>>>>> >>>>>> I was missing a patch that allowed HT80 IBSS in my 4.2. >>>>>> >>>>>> The beta-15 CT firmware appears to do HT80 IBSS just fine >>>>>> with the 4.2 kernel now. >>>>>> >>>>>> I have not attempted to enable this feature on my 4.0 kernel yet. >>>>>> >>>>>> Please also note, I've been hacking on rate-ctrl logic in both 4.0 >>>>>> and 4.2 kernels (and beta-15 firmware)..so if you try it and find >>>>>> something weird, especially in probe requests or association requests, >>>>>> please do let me know. Notes of success are welcome as well of >>>>>> course! >>>>>> >>>>>> http://www.candelatech.com/ath10k.php >>>>>> >>>>>> http://dmz2.candelatech.com/git/gitweb.cgi >>>>>> >>>>>> Thanks, >>>>>> Ben >>>>>> >>>>> >>>>> >>>> >>> >>> >> >> > > > -- > Jorge Baranda > Research Engineer, MSc > jorge.baranda@cttc.es > > Centre Tecnològic de Telecomunicacions de Catalunya (CTTC) > Av. Carl Friedrich Gauss, 7 > 08860 Castelldefels, Barcelona (Spain) > Tel: +34 93 645 29 00 Ext: 2171 > Fax. +34 93 645 29 01 > www.cttc.es > > > _______________________________________________ > ath10k mailing list > ath10k@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/ath10k _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: CT 4.2 kernel now supports 80Mhz IBSS 2015-09-28 6:24 ` Jorge Baranda 2015-09-28 7:27 ` Janusz Dziedzic @ 2015-09-28 13:02 ` Jorge Baranda 1 sibling, 0 replies; 8+ messages in thread From: Jorge Baranda @ 2015-09-28 13:02 UTC (permalink / raw) To: ath10k Dear Ben, I confirm that with the latest CT kernel 4.2.0 and the last versions of iw and wpa_supplicant, IBSS connection can be set to 80MHz channel bandwidth. Thanks, Jordi El 28/09/15 08:24, Jorge Baranda escribió: > Hi Ben, Harms, > > Thank you very much for the information. > I will try it. I hope I can set the link to 80MHz with the new kernel. > > Thanks again, > > Regards, > > Jordi > > El 25/09/2015 a las 18:01, Ben Greear escribió: >> On 09/25/2015 12:56 AM, Jorge Baranda wrote: >>> Hi Harms, >>> >>> Thank you very much for your aclaration. I was trying to follow your >>> setup with the CT kernel 4.0, but with no success, so after the post >>> of Ben, I imagine I >>> have to install CT 4.2 kernel. >>> By the way, I suppose that I have already this patch in my folder of >>> the kernel 4.2 since I downloaded it from git (17/09/15) after you >>> made your post. Just in >>> case, could you point me out to the patch you are refering to? >>> Other thing, which CT firmware are you using (mine Release14)? >>> Additionally, could you share your .config file for the CT 4.2 >>> kernel? I'm having some troubles >>> to make this kernel running and I am a little confused. >> >> Please grab the latest CT 4.2 kernel, I rebased the last 10 or so >> patches a day or two ago: >> >> # This first command blows away the first 20 commits, so if you have >> # added your own patches, then you need to deal with that properly. >> >> git reset --hard HEAD~20 >> git pull >> >> The configs I use are in ./configs/ >> >> In particular, the patch I added to enable HT80 IBSS was this: >> >> http://dmz2.candelatech.com/?p=linux-4.2.dev.y/.git;a=commit;h=c620066342699f63dcdd00ce5f4d0feb4f02b1fc >> >> >> Thanks, >> Ben >> >>> >>> Thanks again, >>> >>> Jordi >>> >>> >>> El 25/09/15 09:47, Harms, Hannes escribió: >>>> Hi, >>>> >>>> yes, I was able to get 80 MHz IBSS working with CT 4.2 , but >>>> I also integrated the missing patch to my kernel even before Ben >>>> mentioned that the patch was missing. >>>> I also forgot that I made this change, sorry >>>> >>>> Regards Hannes >>>> >>>> >>>> Am 25.09.2015 um 08:48 schrieb Jorge Baranda: >>>>> Hi Ben, >>>>> >>>>> I imagine, I am one of the guys you are refering to. >>>>> Within the thread "WLE600VX from PCEngines", I was trying to make >>>>> working a HT80 IBSS connection with wpa_supplicant, but this >>>>> connection was only set to 20MHz. >>>>> I was trying this with the 4.0 kernel, the 10.1.467-ct-14 firmware >>>>> and the last version (git) of wpa_supplicant (2.5). By the way, >>>>> has anyone tried this? >>>>> >>>>> Then, due to this failure, I tried kernel 4.2 because Hannes Harm >>>>> reported success to set HT80 IBSS. But I was not able to configure >>>>> properly this kernel >>>>> (compile OK, but the computer does not boot then). >>>>> >>>>> @Ben, could you share a .config file for kernel 4.2? Do you think >>>>> that Release14 CT firmware would be able to work? I will update >>>>> the 4.2 kernel, compile it >>>>> and try to see >>>>> if I can set up the HT80 IBSS connection. >>>>> >>>>> Thanks, >>>>> >>>>> Jorge >>>>> >>>>> >>>>> El 24/09/15 01:56, Ben Greear escribió: >>>>>> I forget exactly all who was asking for this...but hopefully >>>>>> they are reading this list... >>>>>> >>>>>> I was missing a patch that allowed HT80 IBSS in my 4.2. >>>>>> >>>>>> The beta-15 CT firmware appears to do HT80 IBSS just fine >>>>>> with the 4.2 kernel now. >>>>>> >>>>>> I have not attempted to enable this feature on my 4.0 kernel yet. >>>>>> >>>>>> Please also note, I've been hacking on rate-ctrl logic in both 4.0 >>>>>> and 4.2 kernels (and beta-15 firmware)..so if you try it and find >>>>>> something weird, especially in probe requests or association >>>>>> requests, >>>>>> please do let me know. Notes of success are welcome as well of >>>>>> course! >>>>>> >>>>>> http://www.candelatech.com/ath10k.php >>>>>> >>>>>> http://dmz2.candelatech.com/git/gitweb.cgi >>>>>> >>>>>> Thanks, >>>>>> Ben >>>>>> >>>>> >>>>> >>>> >>> >>> >> >> > > -- Jorge Baranda Research Engineer, MSc jorge.baranda@cttc.es Centre Tecnològic de Telecomunicacions de Catalunya (CTTC) Av. Carl Friedrich Gauss, 7 08860 Castelldefels, Barcelona (Spain) Tel: +34 93 645 29 00 Ext: 2171 Fax. +34 93 645 29 01 www.cttc.es _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-09-28 13:02 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-09-23 23:56 CT 4.2 kernel now supports 80Mhz IBSS Ben Greear 2015-09-25 6:48 ` Jorge Baranda 2015-09-25 7:47 ` Harms, Hannes 2015-09-25 7:56 ` Jorge Baranda 2015-09-25 16:01 ` Ben Greear 2015-09-28 6:24 ` Jorge Baranda 2015-09-28 7:27 ` Janusz Dziedzic 2015-09-28 13:02 ` Jorge Baranda
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.