From: Javier Martinez Canillas <javier@osg.samsung.com>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-kernel@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Russell King <linux@arm.linux.org.uk>,
Kukjin Kim <kgene@kernel.org>,
devicetree@vger.kernel.org, Kumar Gala <galak@codeaurora.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
linux-samsung-soc@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: Add Exynos5250 Snow Rev5+ support
Date: Wed, 30 Sep 2015 08:42:10 +0200 [thread overview]
Message-ID: <560B8442.1070901@osg.samsung.com> (raw)
In-Reply-To: <560B2D29.5060707@samsung.com>
Hello Krzysztof,
On 09/30/2015 02:30 AM, Krzysztof Kozlowski wrote:
[snip]
>>
>> The DTS in the vendor ChromeOS tree are called exynos5250-snow-rev{4,5}.dtb
>> but I decided to leave Rev4 as exynos5250-snow.dtb to avoid breaking u-boot
>> that has CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" in snow_defconfig.
>>
>> Also, ChromiumOS Rev4 DTS has "google,snow-rev4" in its compatible string
>> but was not added in mainline since Rev4 firmware fallbacks to "google,snow"
>> and Rev5 searches for "google,snow-rev5". That way the compatible string
>> could be consistent with the DTS naming and still be able to pack both Rev4
>> and Rev5 FDT in the same FIT image and let the firmware pick the correct FDT.
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/exynos5250-snow-common.dtsi | 684 ++++++++++++++++++++++++++
>> arch/arm/boot/dts/exynos5250-snow-rev5.dts | 47 ++
>> arch/arm/boot/dts/exynos5250-snow.dts | 666 +------------------------
>> 4 files changed, 733 insertions(+), 665 deletions(-)
>> create mode 100644 arch/arm/boot/dts/exynos5250-snow-common.dtsi
>> create mode 100644 arch/arm/boot/dts/exynos5250-snow-rev5.dts
>
> Now the exynos5250-snow.dts means in fact Rev4... but there is no
> information in DTS about it. I think adding compatible
> "google,snow-rev4" makes sense:
> 1. For informational purposes (this could be also handled with a comment).
> 2. Later one could decide to switch the default meaning of "google,snow"
> to Rev5 and the real compatible (rev4) will be there already.
>
Ok, I explained my rationale about why I did not add a "google,snow-rev4"
but I don't have a strong opinion on this so I'll add it on v2.
> Could you add the new compatible and fix patch issues pointed by Doug?
>
Sure.
> Best regards,
> Krzysztof
>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
WARNING: multiple messages have this Message-ID (diff)
From: javier@osg.samsung.com (Javier Martinez Canillas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: Add Exynos5250 Snow Rev5+ support
Date: Wed, 30 Sep 2015 08:42:10 +0200 [thread overview]
Message-ID: <560B8442.1070901@osg.samsung.com> (raw)
In-Reply-To: <560B2D29.5060707@samsung.com>
Hello Krzysztof,
On 09/30/2015 02:30 AM, Krzysztof Kozlowski wrote:
[snip]
>>
>> The DTS in the vendor ChromeOS tree are called exynos5250-snow-rev{4,5}.dtb
>> but I decided to leave Rev4 as exynos5250-snow.dtb to avoid breaking u-boot
>> that has CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" in snow_defconfig.
>>
>> Also, ChromiumOS Rev4 DTS has "google,snow-rev4" in its compatible string
>> but was not added in mainline since Rev4 firmware fallbacks to "google,snow"
>> and Rev5 searches for "google,snow-rev5". That way the compatible string
>> could be consistent with the DTS naming and still be able to pack both Rev4
>> and Rev5 FDT in the same FIT image and let the firmware pick the correct FDT.
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/exynos5250-snow-common.dtsi | 684 ++++++++++++++++++++++++++
>> arch/arm/boot/dts/exynos5250-snow-rev5.dts | 47 ++
>> arch/arm/boot/dts/exynos5250-snow.dts | 666 +------------------------
>> 4 files changed, 733 insertions(+), 665 deletions(-)
>> create mode 100644 arch/arm/boot/dts/exynos5250-snow-common.dtsi
>> create mode 100644 arch/arm/boot/dts/exynos5250-snow-rev5.dts
>
> Now the exynos5250-snow.dts means in fact Rev4... but there is no
> information in DTS about it. I think adding compatible
> "google,snow-rev4" makes sense:
> 1. For informational purposes (this could be also handled with a comment).
> 2. Later one could decide to switch the default meaning of "google,snow"
> to Rev5 and the real compatible (rev4) will be there already.
>
Ok, I explained my rationale about why I did not add a "google,snow-rev4"
but I don't have a strong opinion on this so I'll add it on v2.
> Could you add the new compatible and fix patch issues pointed by Doug?
>
Sure.
> Best regards,
> Krzysztof
>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
next prev parent reply other threads:[~2015-09-30 6:42 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-29 11:57 [PATCH] ARM: dts: Add Exynos5250 Snow Rev5+ support Javier Martinez Canillas
2015-09-29 11:57 ` Javier Martinez Canillas
2015-09-29 12:10 ` Mauro Carvalho Chehab
2015-09-29 12:10 ` Mauro Carvalho Chehab
2015-09-29 17:28 ` Doug Anderson
2015-09-29 17:28 ` Doug Anderson
2015-09-30 6:38 ` Javier Martinez Canillas
2015-09-30 6:38 ` Javier Martinez Canillas
[not found] ` <1443527855-434-1-git-send-email-javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
2015-09-30 0:30 ` Krzysztof Kozlowski
2015-09-30 0:30 ` Krzysztof Kozlowski
2015-09-30 0:30 ` Krzysztof Kozlowski
2015-09-30 6:42 ` Javier Martinez Canillas [this message]
2015-09-30 6:42 ` Javier Martinez Canillas
2015-09-30 6:58 ` Kukjin Kim
2015-09-30 6:58 ` Kukjin Kim
2015-09-30 7:02 ` Krzysztof Kozlowski
2015-09-30 7:02 ` Krzysztof Kozlowski
2015-09-30 7:06 ` Javier Martinez Canillas
2015-09-30 7:06 ` Javier Martinez Canillas
2015-09-30 7:08 ` Krzysztof Kozlowski
2015-09-30 7:08 ` Krzysztof Kozlowski
2015-09-30 7:25 ` Javier Martinez Canillas
2015-09-30 7:25 ` Javier Martinez Canillas
2015-09-30 16:17 ` Doug Anderson
2015-09-30 16:17 ` Doug Anderson
2015-09-30 23:44 ` Krzysztof Kozlowski
2015-09-30 23:44 ` Krzysztof Kozlowski
2015-09-30 23:58 ` Doug Anderson
2015-09-30 23:58 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=560B8442.1070901@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mchehab@osg.samsung.com \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.