[PATCH 0/3] ARM: dts: Various STi DT clean-ups

[PATCH 0/3] ARM: dts: Various STi DT clean-ups

[Maxime Coquelin]

This series cleans the STi407 family DTs, by factorizing common nodes between
STiH407 and STiH410, and also by only enabling PWM and USB nodes at board
level, as they could not be exposed on some boards.

Maxime Coquelin (3):
  ARM: dts: stih407: Enable PWM nodes only board level
  ARM: dts: stih407/410: Tidy up display nodes
  ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level

 arch/arm/boot/dts/stih407-family.dtsi | 19 +++++++++++++++++--
 arch/arm/boot/dts/stih407.dtsi        | 13 -------------
 arch/arm/boot/dts/stih410-b2120.dts   | 24 ++++++++++++++++++++++++
 arch/arm/boot/dts/stih410.dtsi        | 23 +++++++++++------------
 arch/arm/boot/dts/stihxxx-b2120.dtsi  |  8 ++++++++
 5 files changed, 60 insertions(+), 27 deletions(-)

-- 
1.9.1

[PATCH 0/3] ARM: dts: Various STi DT clean-ups

[Maxime Coquelin]

This series cleans the STi407 family DTs, by factorizing common nodes between
STiH407 and STiH410, and also by only enabling PWM and USB nodes at board
level, as they could not be exposed on some boards.

Maxime Coquelin (3):
  ARM: dts: stih407: Enable PWM nodes only board level
  ARM: dts: stih407/410: Tidy up display nodes
  ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level

 arch/arm/boot/dts/stih407-family.dtsi | 19 +++++++++++++++++--
 arch/arm/boot/dts/stih407.dtsi        | 13 -------------
 arch/arm/boot/dts/stih410-b2120.dts   | 24 ++++++++++++++++++++++++
 arch/arm/boot/dts/stih410.dtsi        | 23 +++++++++++------------
 arch/arm/boot/dts/stihxxx-b2120.dtsi  |  8 ++++++++
 5 files changed, 60 insertions(+), 27 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/3] ARM: dts: stih407: Enable PWM nodes only board level

[Maxime Coquelin]

The PWM may not be used on some boards, so enable them only the board file.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
 arch/arm/boot/dts/stih407-family.dtsi | 6 ++++--
 arch/arm/boot/dts/stihxxx-b2120.dtsi  | 8 ++++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index ae05277..9975e8f 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -585,7 +585,6 @@
 		/* COMMS PWM Module */
 		pwm0: pwm at 9810000 {
 			compatible	= "st,sti-pwm";
-			status		= "okay";
 			#pwm-cells	= <2>;
 			reg		= <0x9810000 0x68>;
 			pinctrl-names	= "default";
@@ -593,12 +592,13 @@
 			clock-names	= "pwm";
 			clocks		= <&clk_sysin>;
 			st,pwm-num-chan = <1>;
+
+			status		= "disabled";
 		};
 
 		/* SBC PWM Module */
 		pwm1: pwm at 9510000 {
 			compatible	= "st,sti-pwm";
-			status		= "okay";
 			#pwm-cells	= <2>;
 			reg		= <0x9510000 0x68>;
 			pinctrl-names	= "default";
@@ -609,6 +609,8 @@
 			clock-names	= "pwm";
 			clocks		= <&clk_sysin>;
 			st,pwm-num-chan = <4>;
+
+			status		= "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index f589fe4..ab029f7 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -27,6 +27,14 @@
 			};
 		};
 
+		pwm0: pwm at 9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm at 9510000 {
+			status = "okay";
+		};
+
 		i2c at 9842000 {
 			status = "okay";
 		};
-- 
1.9.1

[PATCH 1/3] ARM: dts: stih407: Enable PWM nodes only board level

[Maxime Coquelin]

The PWM may not be used on some boards, so enable them only the board file.

Signed-off-by: Maxime Coquelin <maxime.coquelin-qxv4g6HH51o@public.gmane.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 6 ++++--
 arch/arm/boot/dts/stihxxx-b2120.dtsi  | 8 ++++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index ae05277..9975e8f 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -585,7 +585,6 @@
 		/* COMMS PWM Module */
 		pwm0: pwm@9810000 {
 			compatible	= "st,sti-pwm";
-			status		= "okay";
 			#pwm-cells	= <2>;
 			reg		= <0x9810000 0x68>;
 			pinctrl-names	= "default";
@@ -593,12 +592,13 @@
 			clock-names	= "pwm";
 			clocks		= <&clk_sysin>;
 			st,pwm-num-chan = <1>;
+
+			status		= "disabled";
 		};
 
 		/* SBC PWM Module */
 		pwm1: pwm@9510000 {
 			compatible	= "st,sti-pwm";
-			status		= "okay";
 			#pwm-cells	= <2>;
 			reg		= <0x9510000 0x68>;
 			pinctrl-names	= "default";
@@ -609,6 +609,8 @@
 			clock-names	= "pwm";
 			clocks		= <&clk_sysin>;
 			st,pwm-num-chan = <4>;
+
+			status		= "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index f589fe4..ab029f7 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -27,6 +27,14 @@
 			};
 		};
 
+		pwm0: pwm@9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm@9510000 {
+			status = "okay";
+		};
+
 		i2c@9842000 {
 			status = "okay";
 		};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] ARM: dts: stih407/410: Tidy up display nodes

[Maxime Coquelin]

The display nodes are common to both STiH407 and STiH410, move them to the
family file.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
 arch/arm/boot/dts/stih407-family.dtsi | 13 +++++++++++++
 arch/arm/boot/dts/stih407.dtsi        | 13 -------------
 arch/arm/boot/dts/stih410.dtsi        | 13 -------------
 3 files changed, 13 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 9975e8f..5b454d9 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -152,6 +152,19 @@
 					<ST_IRQ_SYSCFG_DISABLED>;
 		};
 
+		/* Display */
+		vtg_main: sti-vtg-main at 8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+		};
+
+		vtg_aux: sti-vtg-aux at 8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+		};
+
 		serial at 9830000 {
 			compatible = "st,asc";
 			reg = <0x9830000 0x2c>;
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 3efa3b2..98c3468 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -10,19 +10,6 @@
 #include "stih407-family.dtsi"
 / {
 	soc {
-		/* Display */
-		vtg_main: sti-vtg-main at 8d02800 {
-			compatible = "st,vtg";
-			reg = <0x8d02800 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
-		};
-
-		vtg_aux: sti-vtg-aux at 8d00200 {
-			compatible = "st,vtg";
-			reg = <0x8d00200 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
-		};
-
 		sti-display-subsystem {
 			compatible = "st,sti-display-subsystem";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 6f40bc9..23f4a48 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -85,19 +85,6 @@
 			phy-names = "usb";
 		};
 
-		/* Display */
-		vtg_main: sti-vtg-main at 8d02800 {
-			compatible = "st,vtg";
-			reg = <0x8d02800 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
-		};
-
-		vtg_aux: sti-vtg-aux at 8d00200 {
-			compatible = "st,vtg";
-			reg = <0x8d00200 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
-		};
-
 		sti-display-subsystem {
 			compatible = "st,sti-display-subsystem";
 			#address-cells = <1>;
-- 
1.9.1

[PATCH 2/3] ARM: dts: stih407/410: Tidy up display nodes

[Maxime Coquelin]

The display nodes are common to both STiH407 and STiH410, move them to the
family file.

Signed-off-by: Maxime Coquelin <maxime.coquelin-qxv4g6HH51o@public.gmane.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 13 +++++++++++++
 arch/arm/boot/dts/stih407.dtsi        | 13 -------------
 arch/arm/boot/dts/stih410.dtsi        | 13 -------------
 3 files changed, 13 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 9975e8f..5b454d9 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -152,6 +152,19 @@
 					<ST_IRQ_SYSCFG_DISABLED>;
 		};
 
+		/* Display */
+		vtg_main: sti-vtg-main@8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+		};
+
+		vtg_aux: sti-vtg-aux@8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+		};
+
 		serial@9830000 {
 			compatible = "st,asc";
 			reg = <0x9830000 0x2c>;
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 3efa3b2..98c3468 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -10,19 +10,6 @@
 #include "stih407-family.dtsi"
 / {
 	soc {
-		/* Display */
-		vtg_main: sti-vtg-main@8d02800 {
-			compatible = "st,vtg";
-			reg = <0x8d02800 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
-		};
-
-		vtg_aux: sti-vtg-aux@8d00200 {
-			compatible = "st,vtg";
-			reg = <0x8d00200 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
-		};
-
 		sti-display-subsystem {
 			compatible = "st,sti-display-subsystem";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 6f40bc9..23f4a48 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -85,19 +85,6 @@
 			phy-names = "usb";
 		};
 
-		/* Display */
-		vtg_main: sti-vtg-main@8d02800 {
-			compatible = "st,vtg";
-			reg = <0x8d02800 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
-		};
-
-		vtg_aux: sti-vtg-aux@8d00200 {
-			compatible = "st,vtg";
-			reg = <0x8d00200 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
-		};
-
 		sti-display-subsystem {
 			compatible = "st,sti-display-subsystem";
 			#address-cells = <1>;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/3] ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level

[Maxime Coquelin]

A borad might not expose the USB2.0 ports, so disable them by default in SoC
file, and enable them in b2120 board.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---
 arch/arm/boot/dts/stih410-b2120.dts | 24 ++++++++++++++++++++++++
 arch/arm/boot/dts/stih410.dtsi      | 12 ++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 16f02c5..8af1e73 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -35,5 +35,29 @@
 			sd-uhs-sdr104;
 			sd-uhs-ddr50;
 		};
+
+		usb2_picophy1: phy2 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3 {
+			status = "okay";
+		};
+
+		ohci0: usb at 9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb at 9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb at 9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb at 9a83e00 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 23f4a48..e3150e3 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -22,6 +22,8 @@
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 				 <&picophyreset STIH407_PICOPHY0_RESET>;
 			reset-names = "global", "port";
+
+			status = "disabled";
 		};
 
 		usb2_picophy2: phy3 {
@@ -31,6 +33,8 @@
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 				 <&picophyreset STIH407_PICOPHY1_RESET>;
 			reset-names = "global", "port";
+
+			status = "disabled";
 		};
 
 		ohci0: usb at 9a03c00 {
@@ -43,6 +47,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ehci0: usb at 9a03e00 {
@@ -57,6 +63,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ohci1: usb at 9a83c00 {
@@ -69,6 +77,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ehci1: usb at 9a83e00 {
@@ -83,6 +93,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		sti-display-subsystem {
-- 
1.9.1

[PATCH 3/3] ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level

[Maxime Coquelin]

A borad might not expose the USB2.0 ports, so disable them by default in SoC
file, and enable them in b2120 board.

Signed-off-by: Maxime Coquelin <maxime.coquelin-qxv4g6HH51o@public.gmane.org>
---
 arch/arm/boot/dts/stih410-b2120.dts | 24 ++++++++++++++++++++++++
 arch/arm/boot/dts/stih410.dtsi      | 12 ++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 16f02c5..8af1e73 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -35,5 +35,29 @@
 			sd-uhs-sdr104;
 			sd-uhs-ddr50;
 		};
+
+		usb2_picophy1: phy2 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 23f4a48..e3150e3 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -22,6 +22,8 @@
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 				 <&picophyreset STIH407_PICOPHY0_RESET>;
 			reset-names = "global", "port";
+
+			status = "disabled";
 		};
 
 		usb2_picophy2: phy3 {
@@ -31,6 +33,8 @@
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 				 <&picophyreset STIH407_PICOPHY1_RESET>;
 			reset-names = "global", "port";
+
+			status = "disabled";
 		};
 
 		ohci0: usb@9a03c00 {
@@ -43,6 +47,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ehci0: usb@9a03e00 {
@@ -57,6 +63,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ohci1: usb@9a83c00 {
@@ -69,6 +77,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ehci1: usb@9a83e00 {
@@ -83,6 +93,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		sti-display-subsystem {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[STLinux Kernel] [PATCH 3/3] ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level

[Patrice Chotard]

Hi Max

On 09/23/2015 09:37 PM, Maxime Coquelin wrote:
> A borad might not expose the USB2.0 ports, so disable them by default in SoC

typo borad

Otherwise, for the series

Acked-by: Patrice Chotard <patrice.chotard@st.com>

Patrice


> file, and enable them in b2120 board.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
> ---
>   arch/arm/boot/dts/stih410-b2120.dts | 24 ++++++++++++++++++++++++
>   arch/arm/boot/dts/stih410.dtsi      | 12 ++++++++++++
>   2 files changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
> index 16f02c5..8af1e73 100644
> --- a/arch/arm/boot/dts/stih410-b2120.dts
> +++ b/arch/arm/boot/dts/stih410-b2120.dts
> @@ -35,5 +35,29 @@
>   			sd-uhs-sdr104;
>   			sd-uhs-ddr50;
>   		};
> +
> +		usb2_picophy1: phy2 {
> +			status = "okay";
> +		};
> +
> +		usb2_picophy2: phy3 {
> +			status = "okay";
> +		};
> +
> +		ohci0: usb at 9a03c00 {
> +			status = "okay";
> +		};
> +
> +		ehci0: usb at 9a03e00 {
> +			status = "okay";
> +		};
> +
> +		ohci1: usb at 9a83c00 {
> +			status = "okay";
> +		};
> +
> +		ehci1: usb at 9a83e00 {
> +			status = "okay";
> +		};
>   	};
>   };
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index 23f4a48..e3150e3 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -22,6 +22,8 @@
>   			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
>   				 <&picophyreset STIH407_PICOPHY0_RESET>;
>   			reset-names = "global", "port";
> +
> +			status = "disabled";
>   		};
>   
>   		usb2_picophy2: phy3 {
> @@ -31,6 +33,8 @@
>   			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
>   				 <&picophyreset STIH407_PICOPHY1_RESET>;
>   			reset-names = "global", "port";
> +
> +			status = "disabled";
>   		};
>   
>   		ohci0: usb at 9a03c00 {
> @@ -43,6 +47,8 @@
>   			reset-names = "power", "softreset";
>   			phys = <&usb2_picophy1>;
>   			phy-names = "usb";
> +
> +			status = "disabled";
>   		};
>   
>   		ehci0: usb at 9a03e00 {
> @@ -57,6 +63,8 @@
>   			reset-names = "power", "softreset";
>   			phys = <&usb2_picophy1>;
>   			phy-names = "usb";
> +
> +			status = "disabled";
>   		};
>   
>   		ohci1: usb at 9a83c00 {
> @@ -69,6 +77,8 @@
>   			reset-names = "power", "softreset";
>   			phys = <&usb2_picophy2>;
>   			phy-names = "usb";
> +
> +			status = "disabled";
>   		};
>   
>   		ehci1: usb at 9a83e00 {
> @@ -83,6 +93,8 @@
>   			reset-names = "power", "softreset";
>   			phys = <&usb2_picophy2>;
>   			phy-names = "usb";
> +
> +			status = "disabled";
>   		};
>   
>   		sti-display-subsystem {

Re: [STLinux Kernel] [PATCH 3/3] ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level

[Patrice Chotard]

Hi Max

On 09/23/2015 09:37 PM, Maxime Coquelin wrote:
> A borad might not expose the USB2.0 ports, so disable them by default in SoC

typo borad

Otherwise, for the series

Acked-by: Patrice Chotard <patrice.chotard-qxv4g6HH51o@public.gmane.org>

Patrice


> file, and enable them in b2120 board.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin-qxv4g6HH51o@public.gmane.org>
> ---
>   arch/arm/boot/dts/stih410-b2120.dts | 24 ++++++++++++++++++++++++
>   arch/arm/boot/dts/stih410.dtsi      | 12 ++++++++++++
>   2 files changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
> index 16f02c5..8af1e73 100644
> --- a/arch/arm/boot/dts/stih410-b2120.dts
> +++ b/arch/arm/boot/dts/stih410-b2120.dts
> @@ -35,5 +35,29 @@
>   			sd-uhs-sdr104;
>   			sd-uhs-ddr50;
>   		};
> +
> +		usb2_picophy1: phy2 {
> +			status = "okay";
> +		};
> +
> +		usb2_picophy2: phy3 {
> +			status = "okay";
> +		};
> +
> +		ohci0: usb@9a03c00 {
> +			status = "okay";
> +		};
> +
> +		ehci0: usb@9a03e00 {
> +			status = "okay";
> +		};
> +
> +		ohci1: usb@9a83c00 {
> +			status = "okay";
> +		};
> +
> +		ehci1: usb@9a83e00 {
> +			status = "okay";
> +		};
>   	};
>   };
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index 23f4a48..e3150e3 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -22,6 +22,8 @@
>   			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
>   				 <&picophyreset STIH407_PICOPHY0_RESET>;
>   			reset-names = "global", "port";
> +
> +			status = "disabled";
>   		};
>   
>   		usb2_picophy2: phy3 {
> @@ -31,6 +33,8 @@
>   			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
>   				 <&picophyreset STIH407_PICOPHY1_RESET>;
>   			reset-names = "global", "port";
> +
> +			status = "disabled";
>   		};
>   
>   		ohci0: usb@9a03c00 {
> @@ -43,6 +47,8 @@
>   			reset-names = "power", "softreset";
>   			phys = <&usb2_picophy1>;
>   			phy-names = "usb";
> +
> +			status = "disabled";
>   		};
>   
>   		ehci0: usb@9a03e00 {
> @@ -57,6 +63,8 @@
>   			reset-names = "power", "softreset";
>   			phys = <&usb2_picophy1>;
>   			phy-names = "usb";
> +
> +			status = "disabled";
>   		};
>   
>   		ohci1: usb@9a83c00 {
> @@ -69,6 +77,8 @@
>   			reset-names = "power", "softreset";
>   			phys = <&usb2_picophy2>;
>   			phy-names = "usb";
> +
> +			status = "disabled";
>   		};
>   
>   		ehci1: usb@9a83e00 {
> @@ -83,6 +93,8 @@
>   			reset-names = "power", "softreset";
>   			phys = <&usb2_picophy2>;
>   			phy-names = "usb";
> +
> +			status = "disabled";
>   		};
>   
>   		sti-display-subsystem {

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[STLinux Kernel] [PATCH 0/3] ARM: dts: Various STi DT clean-ups

[Peter Griffin]

Hi Maxime,

On Wed, 23 Sep 2015, Maxime Coquelin wrote:

> This series cleans the STi407 family DTs, by factorizing common nodes between
> STiH407 and STiH410, and also by only enabling PWM and USB nodes at board
> level, as they could not be exposed on some boards.

For the series: -

Acked-by: Peter Griffin <peter.griffin@linaro.org>

regards,

Peter.

Re: [STLinux Kernel] [PATCH 0/3] ARM: dts: Various STi DT clean-ups

[Peter Griffin]

Hi Maxime,

On Wed, 23 Sep 2015, Maxime Coquelin wrote:

> This series cleans the STi407 family DTs, by factorizing common nodes between
> STiH407 and STiH410, and also by only enabling PWM and USB nodes at board
> level, as they could not be exposed on some boards.

For the series: -

Acked-by: Peter Griffin <peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

regards,

Peter.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[STLinux Kernel] [PATCH 3/3] ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level

[Maxime Coquelin]

On 09/24/2015 08:58 AM, Patrice Chotard wrote:
> Hi Max
>
> On 09/23/2015 09:37 PM, Maxime Coquelin wrote:
>> A borad might not expose the USB2.0 ports, so disable them by default 
>> in SoC
>
> typo borad
>
> Otherwise, for the series
>
> Acked-by: Patrice Chotard <patrice.chotard@st.com>
>

Thanks Patrice, I will fix the typo before sending the pull request.

Regards,
Maxime

Re: [STLinux Kernel] [PATCH 3/3] ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level

[Maxime Coquelin]

On 09/24/2015 08:58 AM, Patrice Chotard wrote:
> Hi Max
>
> On 09/23/2015 09:37 PM, Maxime Coquelin wrote:
>> A borad might not expose the USB2.0 ports, so disable them by default 
>> in SoC
>
> typo borad
>
> Otherwise, for the series
>
> Acked-by: Patrice Chotard <patrice.chotard-qxv4g6HH51o@public.gmane.org>
>

Thanks Patrice, I will fix the typo before sending the pull request.

Regards,
Maxime
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/3] ARM: dts: Various STi DT clean-ups

[Maxime Coquelin]

On 09/23/2015 09:37 PM, Maxime Coquelin wrote:
> This series cleans the STi407 family DTs, by factorizing common nodes between
> STiH407 and STiH410, and also by only enabling PWM and USB nodes at board
> level, as they could not be exposed on some boards.
>
> Maxime Coquelin (3):
>    ARM: dts: stih407: Enable PWM nodes only board level
>    ARM: dts: stih407/410: Tidy up display nodes
>    ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level
>
>   arch/arm/boot/dts/stih407-family.dtsi | 19 +++++++++++++++++--
>   arch/arm/boot/dts/stih407.dtsi        | 13 -------------
>   arch/arm/boot/dts/stih410-b2120.dts   | 24 ++++++++++++++++++++++++
>   arch/arm/boot/dts/stih410.dtsi        | 23 +++++++++++------------
>   arch/arm/boot/dts/stihxxx-b2120.dtsi  |  8 ++++++++
>   5 files changed, 60 insertions(+), 27 deletions(-)
>
Thanks for the reviews.
Series applied to sti-dt-for-v4.4

Regards,
Maxime

Re: [PATCH 0/3] ARM: dts: Various STi DT clean-ups

[Maxime Coquelin]

On 09/23/2015 09:37 PM, Maxime Coquelin wrote:
> This series cleans the STi407 family DTs, by factorizing common nodes between
> STiH407 and STiH410, and also by only enabling PWM and USB nodes at board
> level, as they could not be exposed on some boards.
>
> Maxime Coquelin (3):
>    ARM: dts: stih407: Enable PWM nodes only board level
>    ARM: dts: stih407/410: Tidy up display nodes
>    ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level
>
>   arch/arm/boot/dts/stih407-family.dtsi | 19 +++++++++++++++++--
>   arch/arm/boot/dts/stih407.dtsi        | 13 -------------
>   arch/arm/boot/dts/stih410-b2120.dts   | 24 ++++++++++++++++++++++++
>   arch/arm/boot/dts/stih410.dtsi        | 23 +++++++++++------------
>   arch/arm/boot/dts/stihxxx-b2120.dtsi  |  8 ++++++++
>   5 files changed, 60 insertions(+), 27 deletions(-)
>
Thanks for the reviews.
Series applied to sti-dt-for-v4.4

Regards,
Maxime
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html