From: "Roger Mårtensson" <roger.martensson@gmail.com>
To: Erik Andresen <erik@vontaene.de>, linux-media@vger.kernel.org
Subject: Re: [PATCH] Add Terratec H7 Revision 4 to DVBSky driver
Date: Thu, 1 Oct 2015 23:21:35 +0200 [thread overview]
Message-ID: <560DA3DF.4060401@gmail.com> (raw)
In-Reply-To: <560D9F1F.7040505@gmail.com>
Den 2015-10-01 kl. 23:01, skrev Roger Mårtensson:
> Den 2015-09-19 kl. 19:30, skrev Erik Andresen:
>> Adds Terratec H7 Rev. 4 with USB id 0ccd:10a5 to DVBSky driver.
>
> I have tested this on a Custom Linux 4.2 kernel and it is working as
> expected.
> Noticed a few things.
>
> 1) "Supported:" on ir-keytable doesn't show anything.
> 1b) Setting RC-5 with ir-keytable -p gives me an error.
> 2) Keymap tt-1500 may be for dvbsky but not for H7 Rev 4. Needed to do
> my own keymap. (48 button remote)
> 2b) The Remote buttons "Music" and "Pic" doesn't give any scancodes in
> ir-keytable -t.
>
> I have tested in a DVB-C environment with CAM/CI and encrypted channels.
> I have two H7 devices and one of them seem to get into a hang and
> needs to be powercycled now and then. At the moment it is always the
> same one that hangs. A linux reboot does not help but I need to do it
> sometimes together with a power cycle of the hanging device.
>
>
I forgot something and I'm not sure you have the right documentation for
it. Some operations seems not to be implemented.
I get a lot of error in MythTV when locking to a channel. It sure would
be nice to see it implemented. It doesn't do any harm. Only filling up
the log.
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: E TVRecEvent
recorders/dvbchannel.cpp:1026 (GetSignalStrength)
DVBChan[23](/dev/dvb/adapter2/frontend0): Getting Frontend signal
strength failed.#012#011#011#011eno: Operation not supported (95)
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: W TVRecEvent
recorders/dvbsignalmonitor.cpp:91 (DVBSignalMonitor)
DVBSigMon[23](/dev/dvb/adapter2/frontend0): Cannot measure Signal
Strength#012#011#011#011eno: Operation not supported (95)
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: E TVRecEvent
recorders/dvbchannel.cpp:1055 (GetSNR)
DVBChan[23](/dev/dvb/adapter2/frontend0): Getting Frontend signal/noise
ratio failed.#012#011#011#011eno: Operation not supported (95)
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: W TVRecEvent
recorders/dvbsignalmonitor.cpp:93 (DVBSignalMonitor)
DVBSigMon[23](/dev/dvb/adapter2/frontend0): Cannot measure
S/N#012#011#011#011eno: Operation not supported (95)
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: E TVRecEvent
recorders/dvbchannel.cpp:1081 (GetBitErrorRate)
DVBChan[23](/dev/dvb/adapter2/frontend0): Getting Frontend signal error
rate failed.#012#011#011#011eno: Operation not supported (95)
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: W TVRecEvent
recorders/dvbsignalmonitor.cpp:95 (DVBSignalMonitor)
DVBSigMon[23](/dev/dvb/adapter2/frontend0): Cannot measure Bit Error
Rate#012#011#011#011eno: Operation not supported (95)
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: E TVRecEvent
recorders/dvbchannel.cpp:1107 (GetUncorrectedBlockCount)
DVBChan[23](/dev/dvb/adapter2/frontend0): Getting Frontend uncorrected
block count failed.#012#011#011#011eno: Operation not supported (95)
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: W TVRecEvent
recorders/dvbsignalmonitor.cpp:97 (DVBSignalMonitor)
DVBSigMon[23](/dev/dvb/adapter2/frontend0): Cannot count Uncorrected
Blocks#012#011#011#011eno: Operation not supported (95)
Oct 1 23:11:16 tvpc mythbackend: mythbackend[2911]: E SignalMonitor
recorders/dvbchannel.cpp:1026 (GetSignalStrength)
DVBChan[23](/dev/dvb/adapter2/frontend0): Getting Frontend signal
strength failed.#012#011#011#011eno: Operation not supported (95)
>> Signed-off-by: Erik Andresen <erik@vontaene.de>
>> ---
>> drivers/media/dvb-core/dvb-usb-ids.h | 1 +
>> drivers/media/usb/dvb-usb-v2/dvbsky.c | 4 ++++
>> 2 files changed, 5 insertions(+)
>>
>> diff --git a/drivers/media/dvb-core/dvb-usb-ids.h
>> b/drivers/media/dvb-core/dvb-usb-ids.h
>> index c117fb3..0a46580 100644
>> --- a/drivers/media/dvb-core/dvb-usb-ids.h
>> +++ b/drivers/media/dvb-core/dvb-usb-ids.h
>> @@ -257,6 +257,7 @@
>> #define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab
>> #define USB_PID_TERRATEC_H7 0x10b4
>> #define USB_PID_TERRATEC_H7_2 0x10a3
>> +#define USB_PID_TERRATEC_H7_3 0x10a5
>> #define USB_PID_TERRATEC_T3 0x10a0
>> #define USB_PID_TERRATEC_T5 0x10a1
>> #define USB_PID_NOXON_DAB_STICK 0x00b3
>> diff --git a/drivers/media/usb/dvb-usb-v2/dvbsky.c
>> b/drivers/media/usb/dvb-usb-v2/dvbsky.c
>> index cdf59bc..8f526a4 100644
>> --- a/drivers/media/usb/dvb-usb-v2/dvbsky.c
>> +++ b/drivers/media/usb/dvb-usb-v2/dvbsky.c
>> @@ -841,6 +841,10 @@ static const struct usb_device_id
>> dvbsky_id_table[] = {
>> USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI,
>> &dvbsky_t680c_props, "TechnoTrend TT-connect CT2-4650 CI",
>> RC_MAP_TT_1500) },
>> + { DVB_USB_DEVICE(USB_VID_TERRATEC,
>> + USB_PID_TERRATEC_H7_3,
>> + &dvbsky_t680c_props, "Terratec H7 Rev.4",
>> + RC_MAP_TT_1500) },
>> { }
>> };
>> MODULE_DEVICE_TABLE(usb, dvbsky_id_table);
>
next prev parent reply other threads:[~2015-10-01 21:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-11 15:04 Terratec H7 Rev. 4 is DVBSky Erik Andresen
2015-09-15 14:43 ` Olli Salonen
2015-09-19 17:30 ` [PATCH] Add Terratec H7 Revision 4 to DVBSky driver Erik Andresen
2015-10-01 21:01 ` Roger Mårtensson
2015-10-01 21:21 ` Roger Mårtensson [this message]
2015-09-19 21:39 ` Terratec H7 Rev. 4 is DVBSky Roger Mårtensson
2015-09-19 21:48 ` Roger Mårtensson
2015-09-20 9:05 ` Erik Andresen
2015-10-01 21:02 ` Roger Mårtensson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=560DA3DF.4060401@gmail.com \
--to=roger.martensson@gmail.com \
--cc=erik@vontaene.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.