From: Jaehoon Chung <jh80.chung@samsung.com>
To: Shawn Lin <shawn.lin@rock-chips.com>, ulf.hansson@linaro.org
Cc: Vineet.Gupta1@synopsys.com, Wei Xu <xuwei5@hisilicon.com>,
Joachim Eastwood <manabian@gmail.com>,
Alexey Brodkin <abrodkin@synopsys.com>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Russell King <linux@arm.linux.org.uk>,
Jun Nie <jun.nie@linaro.org>, Ralf Baechle <ralf@linux-mips.org>,
Govindraj Raja <govindraj.raja@imgtec.com>,
Arnd Bergmann <arnd@arndb.de>,
heiko@sntech.de, dianders@chromium.org,
linux-samsung-soc@vger.kernel.org, linux-mips@linux-mips.org,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, CPGS <cpgs@samsung.com>
Subject: Re: [RFC PATCH v8 0/10] Add external dma support for Synopsys MSHC
Date: Mon, 05 Oct 2015 10:36:32 +0900 [thread overview]
Message-ID: <5611D420.5080708@samsung.com> (raw)
In-Reply-To: <560E5320.6050003@rock-chips.com>
Hi, Shawn.
On 10/02/2015 06:49 PM, Shawn Lin wrote:
> On 2015/10/1 17:14, Jaehoon Chung wrote:
>> Dear, All.
>>
>> I will apply patch 01-03 at my repository on today.
>> But i don't know better how i do about other patches relevant to config file.
>>
>
> Thanks, Jaehoon. :)
>
> I guess it would be acceptable to pick the config changes, already they were acked by the soc maintainers, via dw_mmc tree when ulf merge dw_mmc tree into his mmc-tree.
Some patches didn't get the maintainer's acked-by.
I will wait for that..until this week. How about?
Best Regards,
Jaehoon Chung
>
>
>> Best Regards,
>> Jaehoon Chung
>>
>> On 09/16/2015 03:40 PM, Shawn Lin wrote:
>>> Synopsys DesignWare mobile storage host controller supports three
>>> types of transfer mode: pio, internal dma and external dma. However,
>>> dw_mmc can only supports pio and internal dma now. Thus some platforms
>>> using dw-mshc integrated with generic dma can't work in dma mode. So we
>>> submit this patch to achieve it.
>>>
>>> And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
>>> (commit:f95f3850) for the first version of dw_mmc and never be touched since
>>> then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
>>> we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
>>> time. Nowadays, device-tree helps us to support a variety of boards with one
>>> kernel. That's why we need to remove it and decide the transfer mode by reading
>>> dw_mmc's HCON reg at runtime.
>>>
>>> This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
>>> to make the running.
>>>
>>> Patch does the following things:
>>> - remove CONFIG_MMC_DW_IDMAC config option
>>> - add bindings for edmac used by synopsys-dw-mshc
>>> at runtime
>>> - add edmac support for synopsys-dw-mshc
>>>
>>> Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
>>>
>>> Test emmc throughput on my platform with edmac support and without edmac support(pio only)
>>> iozone -L64 -S32 -azecwI -+n -r4k -r64k -r128k -s1g -i0 -i1 -i2 -f datafile -Rb out.xls > /mnt/result.txt
>>> (light cpu loading, Direct IO, fixed line size, all pattern recycle, 1GB data in total)
>>> ___________________________________________________________
>>> | external dma mode |
>>> |-----------------------------------------------------------|
>>> |blksz | Random Read | Random Write | Seq Read | Seq Write|
>>> |-----------------------------------------------------------|
>>> |4kB | 13953kB/s | 8602kB/s | 13672kB/s | 9785kB/s|
>>> |-----------------------------------------------------------|
>>> |64kB | 46058kB/s | 24794kB/s | 48058kB/s | 25418kB/s|
>>> |-----------------------------------------------------------|
>>> |128kB | 57026kB/s | 35117kB/s | 57375kB/s | 35183kB/s|
>>> |-----------------------------------------------------------|
>>> VS
>>> ___________________________________________________________
>>> | pio mode |
>>> |-----------------------------------------------------------|
>>> |blksz | Random Read | Random Write | Seq Read | Seq Write|
>>> |-----------------------------------------------------------|
>>> |4kB | 11720kB/s | 8644kB/s | 11549kB/s | 9624kB/s|
>>> |-----------------------------------------------------------|
>>> |64kB | 21869kB/s | 24414kB/s | 22031kB/s | 27986kB/s|
>>> |-----------------------------------------------------------|
>>> |128kB | 23718kB/s | 34495kB/s | 24698kB/s | 34637kB/s|
>>> |-----------------------------------------------------------|
>>>
>>>
>>> Changes in v8:
>>> - remove trans_mode variable
>>> - remove unnecessary dma_ops check
>>> - remove unnecessary comment
>>> - fix coding style based on latest ulf's next
>>> - add Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
>>> for HCON's changes
>>>
>>> Changes in v7:
>>> - rebased on Ulf's next
>>> - combine condition state
>>> - elaborate more about DMA_INTERFACE
>>> - define some macro for DMA_INERFACE value
>>> - spilt HCON ops' changes into another patch
>>>
>>> Changes in v6:
>>> - add trans_mode condition for IDMAC initialization
>>> suggested by Heiko
>>> - re-test my patch on rk3188 platform and update commit msg
>>> - update performance of pio vs edmac in cover letter
>>>
>>> Changes in v5:
>>> - add the title of cover letter
>>> - fix typo of comment
>>> - add macro for reading HCON register
>>> - add "Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>" for exynos_defconfig patch
>>> - add "Acked-by: Vineet Gupta <vgupta@synopsys.com>" for axs10x_defconfig patch
>>> - add "Acked-by: Govindraj Raja <govindraj.raja@imgtec.com>" and
>>> "Acked-by: Ralf Baechle <ralf@linux-mips.org>" for pistachio_defconfig patch
>>> - add "Acked-by: Joachim Eastwood <manabian@gmail.com>" for lpc18xx_defconfig patch
>>> - add "Acked-by: Wei Xu <xuwei5@hisilicon.com>" for hisi_defconfig patch
>>> - rebase on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for merging easily
>>>
>>> Changes in v4:
>>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>> transfer mode.
>>> - remove all bt-bindings' changes since we don't need new properities.
>>> - check transfer mode at runtime by reading HCON reg
>>> - spilt defconfig changes for each sub-architecture
>>> - fix the title of cover letter
>>> - reuse some code for reducing code size
>>>
>>> Changes in v3:
>>> - choose transfer mode at runtime
>>> - remove all CONFIG_MMC_DW_IDMAC config option
>>> - add supports-idmac property for some platforms
>>>
>>> Changes in v2:
>>> - Fix typo of dev_info msg
>>> - remove unused dmach from declaration of dw_mci_dma_slave
>>>
>>> Shawn Lin (10):
>>> mmc: dw_mmc: Add external dma interface support
>>> mmc: dw_mmc: use macro for HCON register operations
>>> Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
>>> mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>
>>> .../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 25 ++
>>> arch/arc/configs/axs101_defconfig | 1 -
>>> arch/arc/configs/axs103_defconfig | 1 -
>>> arch/arc/configs/axs103_smp_defconfig | 1 -
>>> arch/arm/configs/exynos_defconfig | 1 -
>>> arch/arm/configs/hisi_defconfig | 1 -
>>> arch/arm/configs/lpc18xx_defconfig | 1 -
>>> arch/arm/configs/multi_v7_defconfig | 1 -
>>> arch/arm/configs/zx_defconfig | 1 -
>>> arch/mips/configs/pistachio_defconfig | 1 -
>>> drivers/mmc/host/Kconfig | 11 +-
>>> drivers/mmc/host/dw_mmc-pltfm.c | 2 +
>>> drivers/mmc/host/dw_mmc.c | 272 +++++++++++++++++----
>>> drivers/mmc/host/dw_mmc.h | 9 +
>>> include/linux/mmc/dw_mmc.h | 23 +-
>>> 15 files changed, 276 insertions(+), 75 deletions(-)
>>>
>>
>>
>>
>>
>
>
WARNING: multiple messages have this Message-ID (diff)
From: jh80.chung@samsung.com (Jaehoon Chung)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v8 0/10] Add external dma support for Synopsys MSHC
Date: Mon, 05 Oct 2015 10:36:32 +0900 [thread overview]
Message-ID: <5611D420.5080708@samsung.com> (raw)
In-Reply-To: <560E5320.6050003@rock-chips.com>
Hi, Shawn.
On 10/02/2015 06:49 PM, Shawn Lin wrote:
> On 2015/10/1 17:14, Jaehoon Chung wrote:
>> Dear, All.
>>
>> I will apply patch 01-03 at my repository on today.
>> But i don't know better how i do about other patches relevant to config file.
>>
>
> Thanks, Jaehoon. :)
>
> I guess it would be acceptable to pick the config changes, already they were acked by the soc maintainers, via dw_mmc tree when ulf merge dw_mmc tree into his mmc-tree.
Some patches didn't get the maintainer's acked-by.
I will wait for that..until this week. How about?
Best Regards,
Jaehoon Chung
>
>
>> Best Regards,
>> Jaehoon Chung
>>
>> On 09/16/2015 03:40 PM, Shawn Lin wrote:
>>> Synopsys DesignWare mobile storage host controller supports three
>>> types of transfer mode: pio, internal dma and external dma. However,
>>> dw_mmc can only supports pio and internal dma now. Thus some platforms
>>> using dw-mshc integrated with generic dma can't work in dma mode. So we
>>> submit this patch to achieve it.
>>>
>>> And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
>>> (commit:f95f3850) for the first version of dw_mmc and never be touched since
>>> then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
>>> we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
>>> time. Nowadays, device-tree helps us to support a variety of boards with one
>>> kernel. That's why we need to remove it and decide the transfer mode by reading
>>> dw_mmc's HCON reg at runtime.
>>>
>>> This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
>>> to make the running.
>>>
>>> Patch does the following things:
>>> - remove CONFIG_MMC_DW_IDMAC config option
>>> - add bindings for edmac used by synopsys-dw-mshc
>>> at runtime
>>> - add edmac support for synopsys-dw-mshc
>>>
>>> Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
>>>
>>> Test emmc throughput on my platform with edmac support and without edmac support(pio only)
>>> iozone -L64 -S32 -azecwI -+n -r4k -r64k -r128k -s1g -i0 -i1 -i2 -f datafile -Rb out.xls > /mnt/result.txt
>>> (light cpu loading, Direct IO, fixed line size, all pattern recycle, 1GB data in total)
>>> ___________________________________________________________
>>> | external dma mode |
>>> |-----------------------------------------------------------|
>>> |blksz | Random Read | Random Write | Seq Read | Seq Write|
>>> |-----------------------------------------------------------|
>>> |4kB | 13953kB/s | 8602kB/s | 13672kB/s | 9785kB/s|
>>> |-----------------------------------------------------------|
>>> |64kB | 46058kB/s | 24794kB/s | 48058kB/s | 25418kB/s|
>>> |-----------------------------------------------------------|
>>> |128kB | 57026kB/s | 35117kB/s | 57375kB/s | 35183kB/s|
>>> |-----------------------------------------------------------|
>>> VS
>>> ___________________________________________________________
>>> | pio mode |
>>> |-----------------------------------------------------------|
>>> |blksz | Random Read | Random Write | Seq Read | Seq Write|
>>> |-----------------------------------------------------------|
>>> |4kB | 11720kB/s | 8644kB/s | 11549kB/s | 9624kB/s|
>>> |-----------------------------------------------------------|
>>> |64kB | 21869kB/s | 24414kB/s | 22031kB/s | 27986kB/s|
>>> |-----------------------------------------------------------|
>>> |128kB | 23718kB/s | 34495kB/s | 24698kB/s | 34637kB/s|
>>> |-----------------------------------------------------------|
>>>
>>>
>>> Changes in v8:
>>> - remove trans_mode variable
>>> - remove unnecessary dma_ops check
>>> - remove unnecessary comment
>>> - fix coding style based on latest ulf's next
>>> - add Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
>>> for HCON's changes
>>>
>>> Changes in v7:
>>> - rebased on Ulf's next
>>> - combine condition state
>>> - elaborate more about DMA_INTERFACE
>>> - define some macro for DMA_INERFACE value
>>> - spilt HCON ops' changes into another patch
>>>
>>> Changes in v6:
>>> - add trans_mode condition for IDMAC initialization
>>> suggested by Heiko
>>> - re-test my patch on rk3188 platform and update commit msg
>>> - update performance of pio vs edmac in cover letter
>>>
>>> Changes in v5:
>>> - add the title of cover letter
>>> - fix typo of comment
>>> - add macro for reading HCON register
>>> - add "Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>" for exynos_defconfig patch
>>> - add "Acked-by: Vineet Gupta <vgupta@synopsys.com>" for axs10x_defconfig patch
>>> - add "Acked-by: Govindraj Raja <govindraj.raja@imgtec.com>" and
>>> "Acked-by: Ralf Baechle <ralf@linux-mips.org>" for pistachio_defconfig patch
>>> - add "Acked-by: Joachim Eastwood <manabian@gmail.com>" for lpc18xx_defconfig patch
>>> - add "Acked-by: Wei Xu <xuwei5@hisilicon.com>" for hisi_defconfig patch
>>> - rebase on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for merging easily
>>>
>>> Changes in v4:
>>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>> transfer mode.
>>> - remove all bt-bindings' changes since we don't need new properities.
>>> - check transfer mode at runtime by reading HCON reg
>>> - spilt defconfig changes for each sub-architecture
>>> - fix the title of cover letter
>>> - reuse some code for reducing code size
>>>
>>> Changes in v3:
>>> - choose transfer mode at runtime
>>> - remove all CONFIG_MMC_DW_IDMAC config option
>>> - add supports-idmac property for some platforms
>>>
>>> Changes in v2:
>>> - Fix typo of dev_info msg
>>> - remove unused dmach from declaration of dw_mci_dma_slave
>>>
>>> Shawn Lin (10):
>>> mmc: dw_mmc: Add external dma interface support
>>> mmc: dw_mmc: use macro for HCON register operations
>>> Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
>>> mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
>>> arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>>
>>> .../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 25 ++
>>> arch/arc/configs/axs101_defconfig | 1 -
>>> arch/arc/configs/axs103_defconfig | 1 -
>>> arch/arc/configs/axs103_smp_defconfig | 1 -
>>> arch/arm/configs/exynos_defconfig | 1 -
>>> arch/arm/configs/hisi_defconfig | 1 -
>>> arch/arm/configs/lpc18xx_defconfig | 1 -
>>> arch/arm/configs/multi_v7_defconfig | 1 -
>>> arch/arm/configs/zx_defconfig | 1 -
>>> arch/mips/configs/pistachio_defconfig | 1 -
>>> drivers/mmc/host/Kconfig | 11 +-
>>> drivers/mmc/host/dw_mmc-pltfm.c | 2 +
>>> drivers/mmc/host/dw_mmc.c | 272 +++++++++++++++++----
>>> drivers/mmc/host/dw_mmc.h | 9 +
>>> include/linux/mmc/dw_mmc.h | 23 +-
>>> 15 files changed, 276 insertions(+), 75 deletions(-)
>>>
>>
>>
>>
>>
>
>
next prev parent reply other threads:[~2015-10-05 1:36 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-16 6:40 [RFC PATCH v8 0/10] Add external dma support for Synopsys MSHC Shawn Lin
2015-09-16 6:40 ` Shawn Lin
2015-09-16 6:41 ` [RFC PATCH v8 01/10] mmc: dw_mmc: Add external dma interface support Shawn Lin
2015-09-16 6:41 ` Shawn Lin
2015-09-16 6:41 ` [RFC PATCH v8 02/10] mmc: dw_mmc: use macro for HCON register operations Shawn Lin
2015-09-16 6:41 ` Shawn Lin
2015-09-16 6:41 ` [RFC PATCH v8 03/10] Documentation: synopsys-dw-mshc: add bindings for idmac and edmac Shawn Lin
2015-09-16 6:41 ` Shawn Lin
2015-09-16 6:41 ` Shawn Lin
2015-09-16 6:42 ` [RFC PATCH v8 04/10] mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC Shawn Lin
2015-09-16 6:42 ` Shawn Lin
2015-09-16 6:42 ` [RFC PATCH v8 05/10] arc: axs10x_defconfig: " Shawn Lin
2015-09-16 6:42 ` Shawn Lin
2015-09-16 6:42 ` [RFC PATCH v8 06/10] arm: exynos_defconfig: " Shawn Lin
2015-09-16 6:42 ` Shawn Lin
2015-09-16 6:42 ` [RFC PATCH v8 07/10] arm: hisi_defconfig: " Shawn Lin
2015-09-16 6:42 ` Shawn Lin
2015-09-16 6:43 ` [RFC PATCH v8 08/10] arm: lpc18xx_defconfig: " Shawn Lin
2015-09-16 6:43 ` Shawn Lin
2015-09-16 6:43 ` [RFC PATCH v8 09/10] arm: multi_v7_defconfig: " Shawn Lin
2015-09-16 6:43 ` Shawn Lin
2015-10-29 2:32 ` Jaehoon Chung
2015-10-29 2:32 ` Jaehoon Chung
2015-09-16 6:43 ` [RFC PATCH v8 10/10] arm: zx_defconfig: " Shawn Lin
2015-09-16 6:43 ` Shawn Lin
2015-10-29 2:32 ` Jaehoon Chung
2015-10-29 2:32 ` Jaehoon Chung
2015-10-01 9:14 ` [RFC PATCH v8 0/10] Add external dma support for Synopsys MSHC Jaehoon Chung
2015-10-01 9:14 ` Jaehoon Chung
2015-10-02 9:49 ` Shawn Lin
2015-10-02 9:49 ` Shawn Lin
2015-10-05 1:36 ` Jaehoon Chung [this message]
2015-10-05 1:36 ` Jaehoon Chung
2015-10-05 9:56 ` Shawn Lin
2015-10-05 9:56 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5611D420.5080708@samsung.com \
--to=jh80.chung@samsung.com \
--cc=Vineet.Gupta1@synopsys.com \
--cc=abrodkin@synopsys.com \
--cc=arnd@arndb.de \
--cc=cpgs@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=govindraj.raja@imgtec.com \
--cc=heiko@sntech.de \
--cc=jun.nie@linaro.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=manabian@gmail.com \
--cc=ralf@linux-mips.org \
--cc=shawn.lin@rock-chips.com \
--cc=ulf.hansson@linaro.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.