From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
<ezequiel@vanguardiasur.com.ar>, <javier@dowhile0.org>,
<fcooper@ti.com>, <nsekhar@ti.com>,
<linux-mtd@lists.infradead.org>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<rogerq@ti.com>
Subject: [PATCH v4 11/27] mtd: nand: omap: Clean up device tree support
Date: Tue, 6 Oct 2015 13:35:48 +0300 [thread overview]
Message-ID: <5613A404.9010106@ti.com> (raw)
In-Reply-To: <1442588029-13769-12-git-send-email-rogerq@ti.com>
Move NAND specific device tree parsing to NAND driver.
The NAND controller node must have a compatible id, register space
resource and interrupt resource.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
v4: Warn if using older incompatible DT i.e. compatible property not present
in nand node.
arch/arm/mach-omap2/gpmc-nand.c | 5 +-
drivers/memory/omap-gpmc.c | 143 +++++++--------------------
drivers/mtd/nand/omap2.c | 136 +++++++++++++++++++++----
include/linux/platform_data/mtd-nand-omap2.h | 3 +-
4 files changed, 155 insertions(+), 132 deletions(-)
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index ffe646a..e07ca27 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -95,10 +95,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
gpmc_nand_res[1].start = gpmc_get_irq();
memset(&s, 0, sizeof(struct gpmc_settings));
- if (gpmc_nand_data->of_node)
- gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
- else
- gpmc_set_legacy(gpmc_nand_data, &s);
+ gpmc_set_legacy(gpmc_nand_data, &s);
s.device_nand = true;
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index e75226d..318c187 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -29,7 +29,6 @@
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/omap-gpmc.h>
-#include <linux/mtd/nand.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -1716,105 +1715,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
of_property_read_bool(np, "gpmc,time-para-granularity");
}
-#if IS_ENABLED(CONFIG_MTD_NAND)
-
-static const char * const nand_xfer_types[] = {
- [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
- [NAND_OMAP_POLLED] = "polled",
- [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
- [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
-};
-
-static int gpmc_probe_nand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- u32 val;
- const char *s;
- struct gpmc_timings gpmc_t;
- struct omap_nand_platform_data *gpmc_nand_data;
-
- if (of_property_read_u32(child, "reg", &val) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data),
- GFP_KERNEL);
- if (!gpmc_nand_data)
- return -ENOMEM;
-
- gpmc_nand_data->cs = val;
- gpmc_nand_data->of_node = child;
-
- /* Detect availability of ELM module */
- gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
- if (gpmc_nand_data->elm_of_node == NULL)
- gpmc_nand_data->elm_of_node =
- of_parse_phandle(child, "elm_id", 0);
-
- /* select ecc-scheme for NAND */
- if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
- pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
- return -ENODEV;
- }
-
- if (!strcmp(s, "sw"))
- gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
- else if (!strcmp(s, "ham1") ||
- !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_HAM1_CODE_HW;
- else if (!strcmp(s, "bch4"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH4_CODE_HW;
- else
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
- else if (!strcmp(s, "bch8"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH8_CODE_HW;
- else
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
- else if (!strcmp(s, "bch16"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH16_CODE_HW;
- else
- pr_err("%s: BCH16 requires ELM support\n", __func__);
- else
- pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
-
- /* select data transfer mode for NAND controller */
- if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
- for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
- if (!strcasecmp(s, nand_xfer_types[val])) {
- gpmc_nand_data->xfer_type = val;
- break;
- }
-
- gpmc_nand_data->flash_bbt = of_get_nand_on_flash_bbt(child);
-
- val = of_get_nand_bus_width(child);
- if (val == 16)
- gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
-
- gpmc_read_timings_dt(child, &gpmc_t);
- gpmc_nand_init(gpmc_nand_data, &gpmc_t);
-
- return 0;
-}
-#else
-static int gpmc_probe_nand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- return 0;
-}
-#endif
-
#if IS_ENABLED(CONFIG_MTD_ONENAND)
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
@@ -1933,9 +1833,42 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
goto err;
}
- ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
- if (ret < 0)
- goto err;
+ if (of_node_cmp(child->name, "nand") == 0) {
+ /* NAND specific setup */
+ u32 val;
+
+ /* Warn about older DT blobs with no compatible property */
+ if (!of_property_read_bool(child, "compatible")) {
+ dev_warn(&pdev->dev,
+ "Incompatible NAND node: missing compatible");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ val = of_get_nand_bus_width(child);
+ switch (val) {
+ case 8:
+ gpmc_s.device_width = GPMC_DEVWIDTH_8BIT;
+ break;
+ case 16:
+ gpmc_s.device_width = GPMC_DEVWIDTH_16BIT;
+ break;
+ default:
+ dev_err(&pdev->dev, "%s: invalid 'nand-bus-width'\n",
+ child->name);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* disable write protect */
+ gpmc_configure(GPMC_CONFIG_WP, 0);
+ gpmc_s.device_nand = true;
+ } else {
+ ret = of_property_read_u32(child, "bank-width",
+ &gpmc_s.device_width);
+ if (ret < 0)
+ goto err;
+ }
ret = gpmc_cs_program_settings(cs, &gpmc_s);
if (ret < 0)
@@ -2018,9 +1951,7 @@ static int gpmc_probe_dt(struct platform_device *pdev)
if (!child->name)
continue;
- if (of_node_cmp(child->name, "nand") == 0)
- ret = gpmc_probe_nand_child(pdev, child);
- else if (of_node_cmp(child->name, "onenand") == 0)
+ if (of_node_cmp(child->name, "onenand") == 0)
ret = gpmc_probe_onenand_child(pdev, child);
else
ret = gpmc_probe_generic_child(pdev, child);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index c35405c..228f498 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_mtd.h>
#include <linux/mtd/nand_bch.h>
#include <linux/platform_data/elm.h>
@@ -177,6 +178,8 @@ struct omap_nand_info {
struct gpmc_nand_regs reg;
struct gpmc_nand_ops *ops;
/* generated at runtime depending on ECC algorithm and layout selected */
+ bool flash_bbt;
+ /* generated at runtime depending on ECC algorithm and layout */
struct nand_ecclayout oobinfo;
/* fields specific for BCHx_HW ECC scheme */
struct device *elm_dev;
@@ -1668,10 +1671,84 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info,
return true;
}
+static const char * const nand_xfer_types[] = {
+ [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
+ [NAND_OMAP_POLLED] = "polled",
+ [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
+ [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
+};
+
+static int omap_get_dt_info(struct device *dev, struct omap_nand_info *info)
+{
+ struct device_node *child = dev->of_node;
+ int i;
+ const char *s;
+
+ /* In old bindings, CS num is embedded in reg property */
+ if (of_property_read_u32(child, "reg", &info->gpmc_cs) < 0) {
+ dev_err(dev, "reg not found in DT\n");
+ return -EINVAL;
+ }
+
+ /* detect availability of ELM module. Won't be present pre-OMAP4 */
+ info->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+ if (!info->elm_of_node)
+ dev_dbg(dev, "ti,elm-id not in DT\n");
+
+ /* select ecc-scheme for NAND */
+ if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+ dev_err(dev, "ti,nand-ecc-opt not found\n");
+ return -EINVAL;
+ }
+
+ if (!strcmp(s, "sw")) {
+ info->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+ } else if (!strcmp(s, "ham1") ||
+ !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) {
+ info->ecc_opt = OMAP_ECC_HAM1_CODE_HW;
+ } else if (!strcmp(s, "bch4")) {
+ if (info->elm_of_node)
+ info->ecc_opt = OMAP_ECC_BCH4_CODE_HW;
+ else
+ info->ecc_opt = OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+ } else if (!strcmp(s, "bch8")) {
+ if (info->elm_of_node)
+ info->ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+ else
+ info->ecc_opt = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+ } else if (!strcmp(s, "bch16")) {
+ info->ecc_opt = OMAP_ECC_BCH16_CODE_HW;
+ } else {
+ dev_err(dev, "unrecognized value for ti,nand-ecc-opt\n");
+ return -EINVAL;
+ }
+
+ /* select data transfer mode */
+ if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) {
+ for (i = 0; i < ARRAY_SIZE(nand_xfer_types); i++) {
+ if (!strcasecmp(s, nand_xfer_types[i])) {
+ info->xfer_type = i;
+ goto next;
+ }
+ }
+
+ dev_err(dev, "unrecognized value for ti,nand-xfer-type\n");
+ return -EINVAL;
+ }
+
+next:
+ of_get_nand_on_flash_bbt(child);
+
+ if (of_get_nand_bus_width(child) == 16)
+ info->devsize = NAND_BUSWIDTH_16;
+
+ return 0;
+}
+
static int omap_nand_probe(struct platform_device *pdev)
{
struct omap_nand_info *info;
- struct omap_nand_platform_data *pdata;
+ struct omap_nand_platform_data *pdata = NULL;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
struct nand_ecclayout *ecclayout;
@@ -1682,33 +1759,42 @@ static int omap_nand_probe(struct platform_device *pdev)
unsigned oob_index;
struct resource *res;
struct mtd_part_parser_data ppdata = {};
-
- pdata = dev_get_platdata(&pdev->dev);
- if (pdata == NULL) {
- dev_err(&pdev->dev, "platform data missing\n");
- return -ENODEV;
- }
+ struct device *dev = &pdev->dev;
info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
GFP_KERNEL);
if (!info)
return -ENOMEM;
- platform_set_drvdata(pdev, info);
+ info->pdev = pdev;
+ if (dev->of_node) {
+ if (omap_get_dt_info(dev, info))
+ return -EINVAL;
+ } else {
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data missing\n");
+ return -EINVAL;
+ }
+
+ info->gpmc_cs = pdata->cs;
+ info->reg = pdata->reg;
+ info->of_node = pdata->of_node;
+ info->ecc_opt = pdata->ecc_opt;
+ info->dev_ready = pdata->dev_ready;
+ info->xfer_type = pdata->xfer_type;
+ info->devsize = pdata->devsize;
+ info->elm_of_node = pdata->elm_of_node;
+ info->flash_bbt = pdata->flash_bbt;
+ }
+
+ platform_set_drvdata(pdev, info);
info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
if (!info->ops) {
dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
return -ENODEV;
}
- info->pdev = pdev;
- info->gpmc_cs = pdata->cs;
- info->of_node = pdata->of_node;
- info->ecc_opt = pdata->ecc_opt;
- info->dev_ready = pdata->dev_ready;
- info->xfer_type = pdata->xfer_type;
- info->devsize = pdata->devsize;
- info->elm_of_node = pdata->elm_of_node;
mtd = &info->mtd;
mtd->priv = &info->nand;
@@ -1744,7 +1830,7 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 50;
}
- if (pdata->flash_bbt)
+ if (info->flash_bbt)
nand_chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
else
nand_chip->options |= NAND_SKIP_BBTSCAN;
@@ -2049,9 +2135,13 @@ scan_tail:
goto return_error;
}
- ppdata.of_node = pdata->of_node;
- mtd_device_parse_register(mtd, NULL, &ppdata, pdata->parts,
- pdata->nr_parts);
+ if (dev->of_node) {
+ ppdata.of_node = dev->of_node;
+ mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+
+ } else {
+ mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
+ }
platform_set_drvdata(pdev, mtd);
@@ -2083,11 +2173,17 @@ static int omap_nand_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id omap_nand_ids[] = {
+ { .compatible = "ti,omap2-nand", },
+ {},
+};
+
static struct platform_driver omap_nand_driver = {
.probe = omap_nand_probe,
.remove = omap_nand_remove,
.driver = {
.name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(omap_nand_ids),
},
};
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index a067f58..ff27e5a 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -76,11 +76,10 @@ struct omap_nand_platform_data {
int devsize;
enum omap_ecc ecc_opt;
- /* for passing the partitions */
- struct device_node *of_node;
struct device_node *elm_of_node;
/* deprecated */
struct gpmc_nand_regs reg;
+ struct device_node *of_node;
};
#endif
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Cc: dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
ezequiel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org,
javier-0uQlZySMnqxg9hUCZPvPmw@public.gmane.org,
fcooper-l0cyMroinI0@public.gmane.org,
nsekhar-l0cyMroinI0@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rogerq-l0cyMroinI0@public.gmane.org
Subject: [PATCH v4 11/27] mtd: nand: omap: Clean up device tree support
Date: Tue, 6 Oct 2015 13:35:48 +0300 [thread overview]
Message-ID: <5613A404.9010106@ti.com> (raw)
In-Reply-To: <1442588029-13769-12-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
Move NAND specific device tree parsing to NAND driver.
The NAND controller node must have a compatible id, register space
resource and interrupt resource.
Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
v4: Warn if using older incompatible DT i.e. compatible property not present
in nand node.
arch/arm/mach-omap2/gpmc-nand.c | 5 +-
drivers/memory/omap-gpmc.c | 143 +++++++--------------------
drivers/mtd/nand/omap2.c | 136 +++++++++++++++++++++----
include/linux/platform_data/mtd-nand-omap2.h | 3 +-
4 files changed, 155 insertions(+), 132 deletions(-)
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index ffe646a..e07ca27 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -95,10 +95,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
gpmc_nand_res[1].start = gpmc_get_irq();
memset(&s, 0, sizeof(struct gpmc_settings));
- if (gpmc_nand_data->of_node)
- gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
- else
- gpmc_set_legacy(gpmc_nand_data, &s);
+ gpmc_set_legacy(gpmc_nand_data, &s);
s.device_nand = true;
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index e75226d..318c187 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -29,7 +29,6 @@
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/omap-gpmc.h>
-#include <linux/mtd/nand.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -1716,105 +1715,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
of_property_read_bool(np, "gpmc,time-para-granularity");
}
-#if IS_ENABLED(CONFIG_MTD_NAND)
-
-static const char * const nand_xfer_types[] = {
- [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
- [NAND_OMAP_POLLED] = "polled",
- [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
- [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
-};
-
-static int gpmc_probe_nand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- u32 val;
- const char *s;
- struct gpmc_timings gpmc_t;
- struct omap_nand_platform_data *gpmc_nand_data;
-
- if (of_property_read_u32(child, "reg", &val) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data),
- GFP_KERNEL);
- if (!gpmc_nand_data)
- return -ENOMEM;
-
- gpmc_nand_data->cs = val;
- gpmc_nand_data->of_node = child;
-
- /* Detect availability of ELM module */
- gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
- if (gpmc_nand_data->elm_of_node == NULL)
- gpmc_nand_data->elm_of_node =
- of_parse_phandle(child, "elm_id", 0);
-
- /* select ecc-scheme for NAND */
- if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
- pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
- return -ENODEV;
- }
-
- if (!strcmp(s, "sw"))
- gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
- else if (!strcmp(s, "ham1") ||
- !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_HAM1_CODE_HW;
- else if (!strcmp(s, "bch4"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH4_CODE_HW;
- else
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
- else if (!strcmp(s, "bch8"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH8_CODE_HW;
- else
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
- else if (!strcmp(s, "bch16"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH16_CODE_HW;
- else
- pr_err("%s: BCH16 requires ELM support\n", __func__);
- else
- pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
-
- /* select data transfer mode for NAND controller */
- if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
- for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
- if (!strcasecmp(s, nand_xfer_types[val])) {
- gpmc_nand_data->xfer_type = val;
- break;
- }
-
- gpmc_nand_data->flash_bbt = of_get_nand_on_flash_bbt(child);
-
- val = of_get_nand_bus_width(child);
- if (val == 16)
- gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
-
- gpmc_read_timings_dt(child, &gpmc_t);
- gpmc_nand_init(gpmc_nand_data, &gpmc_t);
-
- return 0;
-}
-#else
-static int gpmc_probe_nand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- return 0;
-}
-#endif
-
#if IS_ENABLED(CONFIG_MTD_ONENAND)
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
@@ -1933,9 +1833,42 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
goto err;
}
- ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
- if (ret < 0)
- goto err;
+ if (of_node_cmp(child->name, "nand") == 0) {
+ /* NAND specific setup */
+ u32 val;
+
+ /* Warn about older DT blobs with no compatible property */
+ if (!of_property_read_bool(child, "compatible")) {
+ dev_warn(&pdev->dev,
+ "Incompatible NAND node: missing compatible");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ val = of_get_nand_bus_width(child);
+ switch (val) {
+ case 8:
+ gpmc_s.device_width = GPMC_DEVWIDTH_8BIT;
+ break;
+ case 16:
+ gpmc_s.device_width = GPMC_DEVWIDTH_16BIT;
+ break;
+ default:
+ dev_err(&pdev->dev, "%s: invalid 'nand-bus-width'\n",
+ child->name);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* disable write protect */
+ gpmc_configure(GPMC_CONFIG_WP, 0);
+ gpmc_s.device_nand = true;
+ } else {
+ ret = of_property_read_u32(child, "bank-width",
+ &gpmc_s.device_width);
+ if (ret < 0)
+ goto err;
+ }
ret = gpmc_cs_program_settings(cs, &gpmc_s);
if (ret < 0)
@@ -2018,9 +1951,7 @@ static int gpmc_probe_dt(struct platform_device *pdev)
if (!child->name)
continue;
- if (of_node_cmp(child->name, "nand") == 0)
- ret = gpmc_probe_nand_child(pdev, child);
- else if (of_node_cmp(child->name, "onenand") == 0)
+ if (of_node_cmp(child->name, "onenand") == 0)
ret = gpmc_probe_onenand_child(pdev, child);
else
ret = gpmc_probe_generic_child(pdev, child);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index c35405c..228f498 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_mtd.h>
#include <linux/mtd/nand_bch.h>
#include <linux/platform_data/elm.h>
@@ -177,6 +178,8 @@ struct omap_nand_info {
struct gpmc_nand_regs reg;
struct gpmc_nand_ops *ops;
/* generated at runtime depending on ECC algorithm and layout selected */
+ bool flash_bbt;
+ /* generated at runtime depending on ECC algorithm and layout */
struct nand_ecclayout oobinfo;
/* fields specific for BCHx_HW ECC scheme */
struct device *elm_dev;
@@ -1668,10 +1671,84 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info,
return true;
}
+static const char * const nand_xfer_types[] = {
+ [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
+ [NAND_OMAP_POLLED] = "polled",
+ [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
+ [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
+};
+
+static int omap_get_dt_info(struct device *dev, struct omap_nand_info *info)
+{
+ struct device_node *child = dev->of_node;
+ int i;
+ const char *s;
+
+ /* In old bindings, CS num is embedded in reg property */
+ if (of_property_read_u32(child, "reg", &info->gpmc_cs) < 0) {
+ dev_err(dev, "reg not found in DT\n");
+ return -EINVAL;
+ }
+
+ /* detect availability of ELM module. Won't be present pre-OMAP4 */
+ info->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+ if (!info->elm_of_node)
+ dev_dbg(dev, "ti,elm-id not in DT\n");
+
+ /* select ecc-scheme for NAND */
+ if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+ dev_err(dev, "ti,nand-ecc-opt not found\n");
+ return -EINVAL;
+ }
+
+ if (!strcmp(s, "sw")) {
+ info->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+ } else if (!strcmp(s, "ham1") ||
+ !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) {
+ info->ecc_opt = OMAP_ECC_HAM1_CODE_HW;
+ } else if (!strcmp(s, "bch4")) {
+ if (info->elm_of_node)
+ info->ecc_opt = OMAP_ECC_BCH4_CODE_HW;
+ else
+ info->ecc_opt = OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+ } else if (!strcmp(s, "bch8")) {
+ if (info->elm_of_node)
+ info->ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+ else
+ info->ecc_opt = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+ } else if (!strcmp(s, "bch16")) {
+ info->ecc_opt = OMAP_ECC_BCH16_CODE_HW;
+ } else {
+ dev_err(dev, "unrecognized value for ti,nand-ecc-opt\n");
+ return -EINVAL;
+ }
+
+ /* select data transfer mode */
+ if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) {
+ for (i = 0; i < ARRAY_SIZE(nand_xfer_types); i++) {
+ if (!strcasecmp(s, nand_xfer_types[i])) {
+ info->xfer_type = i;
+ goto next;
+ }
+ }
+
+ dev_err(dev, "unrecognized value for ti,nand-xfer-type\n");
+ return -EINVAL;
+ }
+
+next:
+ of_get_nand_on_flash_bbt(child);
+
+ if (of_get_nand_bus_width(child) == 16)
+ info->devsize = NAND_BUSWIDTH_16;
+
+ return 0;
+}
+
static int omap_nand_probe(struct platform_device *pdev)
{
struct omap_nand_info *info;
- struct omap_nand_platform_data *pdata;
+ struct omap_nand_platform_data *pdata = NULL;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
struct nand_ecclayout *ecclayout;
@@ -1682,33 +1759,42 @@ static int omap_nand_probe(struct platform_device *pdev)
unsigned oob_index;
struct resource *res;
struct mtd_part_parser_data ppdata = {};
-
- pdata = dev_get_platdata(&pdev->dev);
- if (pdata == NULL) {
- dev_err(&pdev->dev, "platform data missing\n");
- return -ENODEV;
- }
+ struct device *dev = &pdev->dev;
info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
GFP_KERNEL);
if (!info)
return -ENOMEM;
- platform_set_drvdata(pdev, info);
+ info->pdev = pdev;
+ if (dev->of_node) {
+ if (omap_get_dt_info(dev, info))
+ return -EINVAL;
+ } else {
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data missing\n");
+ return -EINVAL;
+ }
+
+ info->gpmc_cs = pdata->cs;
+ info->reg = pdata->reg;
+ info->of_node = pdata->of_node;
+ info->ecc_opt = pdata->ecc_opt;
+ info->dev_ready = pdata->dev_ready;
+ info->xfer_type = pdata->xfer_type;
+ info->devsize = pdata->devsize;
+ info->elm_of_node = pdata->elm_of_node;
+ info->flash_bbt = pdata->flash_bbt;
+ }
+
+ platform_set_drvdata(pdev, info);
info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
if (!info->ops) {
dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
return -ENODEV;
}
- info->pdev = pdev;
- info->gpmc_cs = pdata->cs;
- info->of_node = pdata->of_node;
- info->ecc_opt = pdata->ecc_opt;
- info->dev_ready = pdata->dev_ready;
- info->xfer_type = pdata->xfer_type;
- info->devsize = pdata->devsize;
- info->elm_of_node = pdata->elm_of_node;
mtd = &info->mtd;
mtd->priv = &info->nand;
@@ -1744,7 +1830,7 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 50;
}
- if (pdata->flash_bbt)
+ if (info->flash_bbt)
nand_chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
else
nand_chip->options |= NAND_SKIP_BBTSCAN;
@@ -2049,9 +2135,13 @@ scan_tail:
goto return_error;
}
- ppdata.of_node = pdata->of_node;
- mtd_device_parse_register(mtd, NULL, &ppdata, pdata->parts,
- pdata->nr_parts);
+ if (dev->of_node) {
+ ppdata.of_node = dev->of_node;
+ mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+
+ } else {
+ mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
+ }
platform_set_drvdata(pdev, mtd);
@@ -2083,11 +2173,17 @@ static int omap_nand_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id omap_nand_ids[] = {
+ { .compatible = "ti,omap2-nand", },
+ {},
+};
+
static struct platform_driver omap_nand_driver = {
.probe = omap_nand_probe,
.remove = omap_nand_remove,
.driver = {
.name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(omap_nand_ids),
},
};
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index a067f58..ff27e5a 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -76,11 +76,10 @@ struct omap_nand_platform_data {
int devsize;
enum omap_ecc ecc_opt;
- /* for passing the partitions */
- struct device_node *of_node;
struct device_node *elm_of_node;
/* deprecated */
struct gpmc_nand_regs reg;
+ struct device_node *of_node;
};
#endif
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-10-06 10:36 UTC|newest]
Thread overview: 144+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 14:53 [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-12-03 5:00 ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-10-06 10:35 ` Roger Quadros [this message]
2015-10-06 10:35 ` [PATCH v4 " Roger Quadros
2015-12-03 4:29 ` Brian Norris
2015-12-03 4:29 ` Brian Norris
2015-12-03 5:57 ` Roger Quadros
2015-12-03 5:57 ` Roger Quadros
2015-12-03 6:09 ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-10-26 20:49 ` Brian Norris
2015-10-26 20:49 ` Brian Norris
2015-10-27 8:03 ` Roger Quadros
2015-10-27 8:03 ` Roger Quadros
2015-10-27 8:12 ` Boris Brezillon
2015-10-27 8:12 ` Boris Brezillon
2015-10-27 8:43 ` Roger Quadros
2015-10-27 8:43 ` Roger Quadros
2015-10-27 8:28 ` Boris Brezillon
2015-12-03 4:45 ` Brian Norris
2015-12-03 8:41 ` Boris Brezillon
2015-09-18 14:53 ` [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-10-14 13:34 ` Franklin S Cooper Jr.
2015-10-14 13:34 ` Franklin S Cooper Jr.
2015-10-14 14:17 ` Roger Quadros
2015-10-14 14:17 ` Roger Quadros
2015-10-14 14:37 ` Franklin S Cooper Jr.
2015-10-14 14:37 ` Franklin S Cooper Jr.
2015-09-18 14:53 ` [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 22/27] ARM: dts: am437x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 23/27] ARM: dts: am437x-gp-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 24/27] ARM: dts: am335x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-09-18 14:53 ` [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros
2015-09-18 14:53 ` Roger Quadros
2015-10-13 0:43 ` Tony Lindgren
2015-10-13 0:43 ` Tony Lindgren
2015-10-13 6:29 ` Roger Quadros
2015-10-13 6:29 ` Roger Quadros
2015-10-13 15:18 ` Tony Lindgren
2015-10-13 15:18 ` Tony Lindgren
2015-10-14 7:39 ` Roger Quadros
2015-10-14 7:39 ` Roger Quadros
2015-10-14 8:55 ` [PATCH v4 " Roger Quadros
2015-10-14 8:55 ` Roger Quadros
2015-09-30 7:39 ` [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-30 7:39 ` Roger Quadros
2015-09-30 11:00 ` Roger Quadros
2015-09-30 11:00 ` Roger Quadros
2015-10-06 8:33 ` Tony Lindgren
2015-10-06 9:54 ` Roger Quadros
2015-10-06 9:54 ` Roger Quadros
2015-10-06 10:00 ` Tony Lindgren
2015-10-06 10:00 ` Tony Lindgren
2015-10-06 10:05 ` Roger Quadros
2015-10-06 10:05 ` Roger Quadros
2015-10-06 10:28 ` Roger Quadros
2015-10-06 10:28 ` Roger Quadros
2015-10-06 11:01 ` Tony Lindgren
2015-10-06 11:01 ` Tony Lindgren
2015-10-06 11:09 ` Roger Quadros
2015-10-06 11:09 ` Roger Quadros
2015-10-16 21:25 ` Tony Lindgren
2015-10-19 7:08 ` Roger Quadros
2015-10-19 7:08 ` Roger Quadros
2015-10-21 8:31 ` Roger Quadros
2015-10-21 8:31 ` Roger Quadros
2015-10-21 15:20 ` Tony Lindgren
2015-10-21 15:20 ` Tony Lindgren
2015-10-23 7:09 ` Roger Quadros
2015-10-23 7:09 ` Roger Quadros
2015-11-30 17:26 ` Tony Lindgren
2015-10-26 21:23 ` Brian Norris
2015-10-26 21:23 ` Brian Norris
2015-10-27 9:37 ` Roger Quadros
2015-10-27 9:37 ` Roger Quadros
2015-11-25 10:42 ` Roger Quadros
2015-11-25 10:42 ` Roger Quadros
2015-11-30 19:54 ` Brian Norris
2015-12-01 14:41 ` Roger Quadros
2015-12-01 14:41 ` Roger Quadros
2015-12-02 3:26 ` Brian Norris
2015-12-02 3:26 ` Brian Norris
2015-12-02 5:12 ` Roger Quadros
2015-12-02 5:12 ` Roger Quadros
2015-12-02 15:03 ` Tony Lindgren
2015-12-02 15:03 ` Tony Lindgren
2015-12-02 18:13 ` Brian Norris
2015-12-02 20:05 ` Tony Lindgren
2015-12-02 18:43 ` Brian Norris
2015-12-03 5:09 ` Brian Norris
2015-12-03 5:09 ` Brian Norris
2015-12-03 6:08 ` Roger Quadros
2015-12-03 6:08 ` Roger Quadros
2015-12-03 6:22 ` Brian Norris
2015-12-03 9:01 ` Roger Quadros
2015-12-03 9:01 ` Roger Quadros
2015-12-03 15:17 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5613A404.9010106@ti.com \
--to=rogerq@ti.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=fcooper@ti.com \
--cc=javier@dowhile0.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.