[meta-fsl-arm-extra][PATCH v2 1/6] linux-boundary: Bump kernel version to 3.14.28

[meta-fsl-arm-extra][PATCH v2 1/6] linux-boundary: Bump kernel version to 3.14.28

[Ian Coolidge]

Kernel based on 3.14.28-1.0.0 GA release
Removal of linux-boundary_3.10.53 kernel recipe
Main changes are graphics update to 5.0.11p4.5 and SoloX support
Uses defconfig which is universal to all current Boundary Devices boards

Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
---
 .../linux/linux-boundary-3.10.53/defconfig         | 386 --------------------
 .../linux/linux-boundary-3.14.28/defconfig         | 406 +++++++++++++++++++++
 recipes-kernel/linux/linux-boundary_3.10.53.bb     |  17 -
 recipes-kernel/linux/linux-boundary_3.14.28.bb     |  16 +
 4 files changed, 422 insertions(+), 403 deletions(-)
 delete mode 100644 recipes-kernel/linux/linux-boundary-3.10.53/defconfig
 create mode 100644 recipes-kernel/linux/linux-boundary-3.14.28/defconfig
 delete mode 100644 recipes-kernel/linux/linux-boundary_3.10.53.bb
 create mode 100644 recipes-kernel/linux/linux-boundary_3.14.28.bb

diff --git a/recipes-kernel/linux/linux-boundary-3.10.53/defconfig b/recipes-kernel/linux/linux-boundary-3.10.53/defconfig
deleted file mode 100644
index 3382e43..0000000
--- a/recipes-kernel/linux/linux-boundary-3.10.53/defconfig
+++ /dev/null
@@ -1,386 +0,0 @@
-CONFIG_KERNEL_LZO=y
-CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_CFS_BANDWIDTH=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_MXC=y
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_IMX6=y
-CONFIG_SMP=y
-CONFIG_VMSPLIT_2G=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_KSM=y
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_ARM_IMX6_CPUFREQ=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_TEST_SUSPEND=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CONNTRACK_PROCFS is not set
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_VLAN_8021Q=y
-CONFIG_LLC2=y
-CONFIG_CAN=y
-CONFIG_CAN_FLEXCAN=y
-CONFIG_CAN_M_CAN=y
-CONFIG_BT=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_CFG80211=m
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=m
-CONFIG_RFKILL=y
-CONFIG_RFKILL_GPIO=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_FW_LOADER_USER_HELPER is not set
-CONFIG_CMA=y
-CONFIG_CMA_SIZE_MBYTES=256
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_SPI_NOR_BASE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_IMX=y
-CONFIG_PATA_IMX=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-CONFIG_R8169=m
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MICREL_PHY=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_CDC_MBIM=m
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_USB_HSO=m
-CONFIG_BRCMFMAC=m
-CONFIG_IWLWIFI=m
-CONFIG_RTL8192CE=m
-CONFIG_WL_TI=y
-CONFIG_WL12XX=m
-CONFIG_WLCORE_SDIO=m
-# CONFIG_WILINK_PLATFORM_DATA is not set
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_CWC_HOOKSWITCH=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AR1020_I2C=y
-CONFIG_TOUCHSCREEN_EGALAX=y
-CONFIG_TOUCHSCREEN_FT5X06=y
-CONFIG_TOUCHSCREEN_ILI210X=y
-CONFIG_TOUCHSCREEN_TSC2004=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_FSL_LPUART=y
-CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_FSL_OTP=y
-CONFIG_MAGSTRIPE=m
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_GPIO=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_MXC_MMA8451 is not set
-CONFIG_THERMAL=y
-CONFIG_CPU_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_DEVICE_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_ANATOP=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_RADIO_SUPPORT=y
-CONFIG_VIDEO_V4L2_INT_DEVICE=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_MXC_OUTPUT=y
-CONFIG_VIDEO_MXC_CAPTURE=m
-CONFIG_VIDEO_MXC_CSI_CAMERA=m
-CONFIG_MXC_CAMERA_OV5640=m
-CONFIG_MXC_CAMERA_OV5642=m
-CONFIG_MXC_CAMERA_OV5640_MIPI=m
-CONFIG_MXC_HDMI_CSI2_TC358743=m
-CONFIG_MXC_TVIN_ADV7180=m
-CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
-CONFIG_VIDEO_MXC_IPU_OUTPUT=y
-CONFIG_VIDEO_MXC_PXP_V4L2=y
-CONFIG_SOC_CAMERA=y
-CONFIG_DRM=y
-CONFIG_DRM_VIVANTE=y
-CONFIG_FB=y
-CONFIG_FB_MXS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_L4F00242T03=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FB_MXC_SYNC_PANEL=y
-CONFIG_FB_MXC_LDB=y
-CONFIG_FB_MXC_HDMI=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_SOC_IMX_SGTL5000=y
-CONFIG_SND_SOC_IMX_HDMI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_CP210X=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_SERIAL_QUALCOMM=y
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_MXS_PHY=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_FUNCTIONFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_MULTI=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MXC_IPU=y
-CONFIG_MXC_GPU_VIV=y
-CONFIG_MXC_ASRC=y
-CONFIG_MXC_MIPI_CSI2=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_ISL1208=y
-CONFIG_RTC_DRV_RV4162=y
-CONFIG_RTC_DRV_SNVS=y
-CONFIG_DMADEVICES=y
-# CONFIG_MX3_IPU is not set
-CONFIG_MXC_PXP_V2=y
-CONFIG_IMX_SDMA=y
-CONFIG_STAGING=y
-CONFIG_COMMON_CLK_DEBUG=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXTCON=y
-CONFIG_IIO=y
-CONFIG_PWM=y
-CONFIG_PWM_IMX=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_OVERLAYFS_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_USER=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=y
-CONFIG_CRYPTO_RMD160=y
-CONFIG_CRYPTO_RMD256=y
-CONFIG_CRYPTO_RMD320=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/recipes-kernel/linux/linux-boundary-3.14.28/defconfig b/recipes-kernel/linux/linux-boundary-3.14.28/defconfig
new file mode 100644
index 0000000..634d59f
--- /dev/null
+++ b/recipes-kernel/linux/linux-boundary-3.14.28/defconfig
@@ -0,0 +1,406 @@
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_IMX6=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_KSM=y
+CONFIG_CMA=y
+CONFIG_SECCOMP=y
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_VLAN_8021Q=y
+CONFIG_LLC2=y
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
+CONFIG_CAN_M_CAN=y
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_RFKILL=y
+CONFIG_RFKILL_GPIO=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=320
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_IMX=y
+CONFIG_PATA_IMX=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_R8169=m
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_AT803X_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_AX88179_178A is not set
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_MBIM=m
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_USB_HSO=m
+CONFIG_BRCMFMAC=m
+CONFIG_IWLWIFI=m
+CONFIG_RTL8192CE=m
+CONFIG_WL_TI=y
+CONFIG_WL12XX=m
+CONFIG_WLCORE_SDIO=m
+# CONFIG_WILINK_PLATFORM_DATA is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_CWC_HOOKSWITCH=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AR1020_I2C=y
+CONFIG_TOUCHSCREEN_CR_MULTI=y
+CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_FT5X06=y
+CONFIG_TOUCHSCREEN_ILI210X=y
+CONFIG_TOUCHSCREEN_TSC2004=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_SC16IS7XX=m
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_FSL_OTP=y
+CONFIG_MAGSTRIPE=m
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_GPIO=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_SENSORS_ADS1000=m
+CONFIG_SENSORS_MAG3110=y
+# CONFIG_MXC_MMA8451 is not set
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_IMX_THERMAL=y
+CONFIG_DEVICE_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MAX77823=y
+CONFIG_MFD_ARIZONA_SPI=m
+CONFIG_MFD_WM5102=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_ARIZONA=m
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_MEDIA_PCI_SUPPORT=y
+CONFIG_VIDEO_TW68=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_MXC_OUTPUT=y
+CONFIG_VIDEO_MXC_CAPTURE=m
+CONFIG_MXC_CAMERA_OV5640=m
+CONFIG_MXC_CAMERA_OV5642=m
+CONFIG_MXC_CAMERA_OV5640_MIPI=m
+CONFIG_MXC_VIDEO_GS2971=m
+CONFIG_MXC_HDMI_CSI2_TC358743=m
+CONFIG_MXC_TVIN_ADV7180=m
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
+CONFIG_VIDEO_MXC_IPU_OUTPUT=y
+CONFIG_VIDEO_MXC_PXP_V4L2=y
+CONFIG_VIDEO_MXC_CSI_CAMERA=m
+CONFIG_MXC_CAMERA_SUBDEV_OV5642=m
+CONFIG_SOC_CAMERA=y
+CONFIG_DRM=y
+CONFIG_DRM_VIVANTE=y
+CONFIG_DVI_TFP410=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FB_MXC_SYNC_PANEL=y
+CONFIG_FB_MXC_TVOUT_ADV739X=y
+CONFIG_FB_MXC_LDB=y
+CONFIG_FB_MXC_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_IMX_WM8960=m
+CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_IMX_WM5102=m
+CONFIG_SND_SOC_IMX_HDMI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_CP210X=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_SERIAL_QUALCOMM=y
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_FUNCTIONFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_G_MULTI=m
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MXC_IPU=y
+CONFIG_MXC_GPU_VIV=y
+CONFIG_MXC_MIPI_CSI2=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_ISL1208=y
+CONFIG_RTC_DRV_RV4162=y
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_DMADEVICES=y
+# CONFIG_MX3_IPU is not set
+CONFIG_MXC_PXP_V2=y
+CONFIG_IMX_SDMA=y
+CONFIG_STAGING=y
+CONFIG_DRM_ANX78XX=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXTCON=y
+CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_BATTERY_SAMSUNG=y
+CONFIG_FUELGAUGE_MAX77823=m
+CONFIG_FUELGAUGE_MAX77823_COULOMB_COUNTING=y
+CONFIG_CHARGER_MAX77823=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_OVERLAYFS_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=y
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=y
+CONFIG_CRYPTO_RMD320=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_TWOFISH=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/recipes-kernel/linux/linux-boundary_3.10.53.bb b/recipes-kernel/linux/linux-boundary_3.10.53.bb
deleted file mode 100644
index 84e1f2a..0000000
--- a/recipes-kernel/linux/linux-boundary_3.10.53.bb
+++ /dev/null
@@ -1,17 +0,0 @@
-# Adapted from linux-imx.inc, copyright (C) 2013, 2014 O.S. Systems Software LTDA
-# Released under the MIT license (see COPYING.MIT for the terms)
-
-require recipes-kernel/linux/linux-imx.inc
-require recipes-kernel/linux/linux-dtb.inc
-
-SUMMARY = "Linux kernel for Boundary Devices boards"
-
-SRC_URI = "git://github.com/boundarydevices/linux-imx6.git;branch=${SRCBRANCH} \
-           file://defconfig"
-
-LOCALVERSION = "-1.1.1+yocto"
-SRCBRANCH = "boundary-imx_3.10.53_1.1.1_ga"
-SRCREV = "eee2a48e450a21e15c16da9d21cda4e38981b3d4"
-DEPENDS += "lzop-native bc-native"
-COMPATIBLE_MACHINE = "(mx6)"
-COMPATIBLE_MACHINE = "(nitrogen6x|nitrogen6x-lite)"
diff --git a/recipes-kernel/linux/linux-boundary_3.14.28.bb b/recipes-kernel/linux/linux-boundary_3.14.28.bb
new file mode 100644
index 0000000..a2e20f5
--- /dev/null
+++ b/recipes-kernel/linux/linux-boundary_3.14.28.bb
@@ -0,0 +1,16 @@
+# Adapted from linux-imx.inc, copyright (C) 2013, 2014 O.S. Systems Software LTDA
+# Released under the MIT license (see COPYING.MIT for the terms)
+
+require recipes-kernel/linux/linux-imx.inc
+require recipes-kernel/linux/linux-dtb.inc
+
+SUMMARY = "Linux kernel for Boundary Devices boards"
+
+SRC_URI = "git://github.com/boundarydevices/linux-imx6.git;branch=${SRCBRANCH} \
+           file://defconfig"
+
+LOCALVERSION = "-1.0.0_ga+yocto"
+SRCBRANCH = "boundary-imx_3.14.28_1.0.0_ga"
+SRCREV = "8202d52784eae5a96c0ccb374f7956092406f13e"
+DEPENDS += "lzop-native bc-native"
+COMPATIBLE_MACHINE = "(nitrogen6x|nitrogen6x-lite|nitrogen6sx)"
-- 
1.9.1

[meta-fsl-arm-extra][PATCH v2 2/6] nitrogen6x-lite: Switch to zImage and remove PREFERRED_VERSION

[Ian Coolidge]

Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
---
 conf/machine/nitrogen6x-lite.conf | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/conf/machine/nitrogen6x-lite.conf b/conf/machine/nitrogen6x-lite.conf
index 314adce..0dfde61 100644
--- a/conf/machine/nitrogen6x-lite.conf
+++ b/conf/machine/nitrogen6x-lite.conf
@@ -10,11 +10,10 @@ include conf/machine/include/tune-cortexa9.inc
 SOC_FAMILY = "mx6:mx6dl"
 
 KERNEL_DEVICETREE = "imx6dl-nit6xlite.dtb"
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
 
 PREFERRED_PROVIDER_u-boot = "u-boot-boundary"
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-boundary"
-PREFERRED_VERSION_linux-boundary ?= "3.10.53"
 
 # Use SPI NOR U-Boot by default
 IMAGE_BOOTLOADER ?= ""
-- 
1.9.1

[meta-fsl-arm-extra][PATCH v2 3/6] nitrogen6x: Switch to zImage, Add Nitrogen6_VM DTBs, Remove PREFERRED_VERSION

[Ian Coolidge]

Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
---
 conf/machine/nitrogen6x.conf | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/conf/machine/nitrogen6x.conf b/conf/machine/nitrogen6x.conf
index 02d6468..6cb239f 100644
--- a/conf/machine/nitrogen6x.conf
+++ b/conf/machine/nitrogen6x.conf
@@ -38,12 +38,12 @@ KERNEL_DEVICETREE = "imx6q-sabrelite.dtb \
                         imx6q-nitrogen6_max.dtb \
                         imx6q-nitrogen6x.dtb imx6dl-nitrogen6x.dtb \
                         imx6q-nitrogen6x-hdmi-input.dtb \
+                        imx6dl-nitrogen6_vm.dtb imx6dl-nitrogen6_vm-magstripe.dtb \
 "
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
 
 PREFERRED_PROVIDER_u-boot = "u-boot-boundary"
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-boundary"
-PREFERRED_VERSION_linux-boundary ?= "3.10.53"
 
 # Use SPI NOR U-Boot by default
 IMAGE_BOOTLOADER ?= ""
-- 
1.9.1

[meta-fsl-arm-extra][PATCH v2 4/6] nitrogen6sx: add machine configuration

[Ian Coolidge]

Adds support for Boundary Device's Nitrogen6 SoloX board.
Board features and more information available at:

http://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
---
 conf/machine/nitrogen6sx.conf | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 conf/machine/nitrogen6sx.conf

diff --git a/conf/machine/nitrogen6sx.conf b/conf/machine/nitrogen6sx.conf
new file mode 100644
index 0000000..004b8ec
--- /dev/null
+++ b/conf/machine/nitrogen6sx.conf
@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: Boundary Devices Nitrogen6SX
+#@SOC: i.MX6SoloX
+#@DESCRIPTION: Machine configuration for Boundary Devices Nitrogen6SX
+#@MAINTAINER: Ian Coolidge <ian@boundarydevices.com>
+
+include conf/machine/include/imx-base.inc
+include conf/machine/include/tune-cortexa9.inc
+
+SOC_FAMILY = "mx6:mx6sx"
+
+KERNEL_DEVICETREE = "imx6sx-nitrogen6sx.dtb"
+KERNEL_IMAGETYPE = "zImage"
+
+PREFERRED_PROVIDER_u-boot = "u-boot-boundary"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-boundary"
+
+# Use SPI NOR U-Boot by default
+IMAGE_BOOTLOADER ?= ""
+
+# Ensure boot scripts will be available at rootfs time
+do_rootfs[depends] += "u-boot-script-boundary:do_deploy"
+
+# Boot scripts to install
+BOOT_SCRIPTS = "6x_bootscript-${MACHINE}:6x_bootscript"
+
+UBOOT_MACHINE ?= "nitrogen6sx_config"
+
+SERIAL_CONSOLE = "115200 ttymxc1"
+
+MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-wl12xx"
+MACHINE_FEATURES += " pci wifi bluetooth"
-- 
1.9.1

[meta-fsl-arm-extra][PATCH v2 5/6] u-boot-boundary: Update to v2015-07 release

[Ian Coolidge]

Adds support for Nitrogen6_SoloX board
Required u-boot version for 3.14.28 boundary kernel

Environment variables for display detection has changed
Environment variable "fbpanel" will display all supported displays

Then four variables control which panels you'd like to select:
fb_hdmi controls HDMI display selection
fb_lcd controls LCD display selection
fb_lvds controls LVDS display selection
fb_lvds2 controls LVDS2 display selection

Example selection:
setenv fb_hdmi 1280x720M@60
setenv fb_lcd CLAA-WVGA
setenv fb_lvds hannstar7
setenv fb_lvds2 hannstar

Defaults and more information can be seen here:
https://github.com/boundarydevices/u-boot-imx6/blob/7bad84fd3cb5eca9f35ce5555955e666fc382171/arch/arm/imx-common/fbpanel.c#L17-L57

Displays defined here:
https://github.com/boundarydevices/u-boot-imx6/blob/boundary-v2015.07/arch/arm/include/asm/imx-common/fbpanel.h

Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
---
 recipes-bsp/u-boot/u-boot-boundary_git.bb | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/recipes-bsp/u-boot/u-boot-boundary_git.bb b/recipes-bsp/u-boot/u-boot-boundary_git.bb
index ef12a4b..6108c42 100644
--- a/recipes-bsp/u-boot/u-boot-boundary_git.bb
+++ b/recipes-bsp/u-boot/u-boot-boundary_git.bb
@@ -3,14 +3,14 @@ require recipes-bsp/u-boot/u-boot.inc
 DESCRIPTION = "u-boot for Boundary Devices boards."
 LICENSE = "GPLv2+"
 LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb"
-COMPATIBLE_MACHINE = "(imx6qsabrelite|nitrogen6x)"
+COMPATIBLE_MACHINE = "(imx6qsabrelite|nitrogen6x|nitrogen6sx)"
 
 PROVIDES = "u-boot"
 
-PV = "v2014.07+git${SRCPV}"
+PV = "v2015.07+git${SRCPV}"
 
-SRCREV = "21eb41461f0f1e9b7dde59cee37de89b473868ef"
-SRCBRANCH = "v2014.07-20140914"
+SRCREV = "440d48194fd7191de95eae3db5360c6c4384d3db"
+SRCBRANCH = "boundary-v2015.07"
 SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git;branch=${SRCBRANCH}"
 
 S = "${WORKDIR}/git"
-- 
1.9.1

[meta-fsl-arm-extra][PATCH v2 6/6] u-boot-script-boundary: New bootscript for boundary 3.14.28 kernel

[Ian Coolidge]

New bootscript that supports all Boundary Device's current boards, including the Nitrogen6_SoloX, and their default DTBs.
Uses new u-boot fbpanel display detection.
See previous commit message for u-boot-boundary_git.bb for more detailed information.

Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
---
 recipes-bsp/u-boot/u-boot-script-boundary_git.bb | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/recipes-bsp/u-boot/u-boot-script-boundary_git.bb b/recipes-bsp/u-boot/u-boot-script-boundary_git.bb
index 22103c1..1ffca84 100644
--- a/recipes-bsp/u-boot/u-boot-script-boundary_git.bb
+++ b/recipes-bsp/u-boot/u-boot-script-boundary_git.bb
@@ -1,20 +1,18 @@
 LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=0507cd7da8e7ad6d6701926ec9b84c95"
 DEPENDS = "u-boot-mkimage-native"
 
-PV = "v2014.07+git${SRCPV}"
+PV = "v2015.07+git${SRCPV}"
 
-SRCREV = "21eb41461f0f1e9b7dde59cee37de89b473868ef"
-SRCBRANCH = "v2014.07-20140914"
+SRCREV = "440d48194fd7191de95eae3db5360c6c4384d3db"
+SRCBRANCH = "boundary-v2015.07"
 SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git;branch=${SRCBRANCH}"
 
 S = "${WORKDIR}/git"
 
 inherit deploy
 
-BOOTSCRIPT ?= "${S}/board/boundary/nitrogen6x/6x_bootscript-yocto-3.10.53.txt"
-BOOTSCRIPT_imx6qsabrelite ?= "${S}/board/boundary/nitrogen6x/6x_bootscript-yocto-3.10.53.txt"
-BOOTSCRIPT_nitrogen6x-lite ?= "${S}/board/boundary/nit6xlite/6x_bootscript-yocto-3.10.53.txt"
+BOOTSCRIPT ?= "${S}/board/boundary/nitrogen6x/6x_bootscript-yocto-3.14.txt"
 
 UPGRADESCRIPT = "${S}/board/boundary/nitrogen6x/6x_upgrade.txt"
 
@@ -55,4 +53,4 @@ do_install[noexec] = "1"
 do_populate_sysroot[noexec] = "1"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "(nitrogen6x|nitrogen6x-lite)"
+COMPATIBLE_MACHINE = "(nitrogen6x|nitrogen6x-lite|nitrogen6sx)"
-- 
1.9.1

Re: [meta-fsl-arm-extra][PATCH v2 1/6] linux-boundary: Bump kernel version to 3.14.28

[Gary Thomas]

[-- Attachment #1: Type: text/plain, Size: 934 bytes --]

On 2015-10-05 19:09, Ian Coolidge wrote:
> Kernel based on 3.14.28-1.0.0 GA release
> Removal of linux-boundary_3.10.53 kernel recipe
> Main changes are graphics update to 5.0.11p4.5 and SoloX support
> Uses defconfig which is universal to all current Boundary Devices boards
>
> Signed-off-by: Ian Coolidge <ian@boundarydevices.com>

With the recent changes to kernel-module-imx-gpu-viv, this kernel needs a patch
for the 'galcore' module to successfully load.  Once this patch is in place, along
with the update to kernel-module-imx-gpu-viv, X11 graphics work again.

Rather than provide a patch to the kernel recipe, here is the change
so it can be integrated directly into the kernel.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

[-- Attachment #2: add-missing-dma-symbols.patch --]
[-- Type: text/x-patch, Size: 542 bytes --]

Index: kernel-source/arch/arm/kernel/setup.c
===================================================================
--- kernel-source.orig/arch/arm/kernel/setup.c
+++ kernel-source/arch/arm/kernel/setup.c
@@ -1081,3 +1081,11 @@ const struct seq_operations cpuinfo_op =
 	.stop	= c_stop,
 	.show	= c_show
 };
+
+/* export the cache management functions */
+#ifndef MULTI_CACHE
+
+EXPORT_SYMBOL(__glue(_CACHE,_dma_map_area));
+EXPORT_SYMBOL(__glue(_CACHE,_dma_unmap_area));
+EXPORT_SYMBOL(__glue(_CACHE,_dma_flush_range));
+#endif

Re: [meta-fsl-arm-extra][PATCH v2 1/6] linux-boundary: Bump kernel version to 3.14.28

[Otavio Salvador]

Gary,

On Thu, Oct 8, 2015 at 10:07 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 2015-10-05 19:09, Ian Coolidge wrote:
>>
>> Kernel based on 3.14.28-1.0.0 GA release
>> Removal of linux-boundary_3.10.53 kernel recipe
>> Main changes are graphics update to 5.0.11p4.5 and SoloX support
>> Uses defconfig which is universal to all current Boundary Devices boards
>>
>> Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
>
>
> With the recent changes to kernel-module-imx-gpu-viv, this kernel needs a
> patch
> for the 'galcore' module to successfully load.  Once this patch is in place,
> along
> with the update to kernel-module-imx-gpu-viv, X11 graphics work again.
>
> Rather than provide a patch to the kernel recipe, here is the change
> so it can be integrated directly into the kernel.

While Ian don't apply the patch, do you mind preparing the patch for the layer?

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm-extra][PATCH v2 1/6] linux-boundary: Bump kernel version to 3.14.28

[Gary Thomas]

On 2015-10-08 07:12, Otavio Salvador wrote:
> Gary,
>
> On Thu, Oct 8, 2015 at 10:07 AM, Gary Thomas <gary@mlbassoc.com> wrote:
>> On 2015-10-05 19:09, Ian Coolidge wrote:
>>>
>>> Kernel based on 3.14.28-1.0.0 GA release
>>> Removal of linux-boundary_3.10.53 kernel recipe
>>> Main changes are graphics update to 5.0.11p4.5 and SoloX support
>>> Uses defconfig which is universal to all current Boundary Devices boards
>>>
>>> Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
>>
>>
>> With the recent changes to kernel-module-imx-gpu-viv, this kernel needs a
>> patch
>> for the 'galcore' module to successfully load.  Once this patch is in place,
>> along
>> with the update to kernel-module-imx-gpu-viv, X11 graphics work again.
>>
>> Rather than provide a patch to the kernel recipe, here is the change
>> so it can be integrated directly into the kernel.
>
> While Ian don't apply the patch, do you mind preparing the patch for the layer?
>

I could, but it seems a bit hasty.  I imagine that Ian will work
this properly into their kernel quite soon.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------