* [PATCH 0/4] arm64: dts: qcom: add support to LS and HS connectors
@ 2015-10-08 11:18 ` Srinivas Kandagatla
0 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:18 UTC (permalink / raw)
To: linux-arm-kernel
Hi Andy,
This patchset adds support for i2c and spi on High-Speed and Low speed
connectors on DB410c.
One of the patch fixes the sleep state of existing i2c node.
thanks,
srini
Srinivas Kandagatla (4):
arm64: dts: fix i2c pinconf sleep state function
arm64: dts: qcom: Add msm8916 I2C nodes.
arm64: dts: apq8016-sbc: enable i2c buses on LS and HS
arm64: dts: apq8016-sbc: enable spi buses on LS and HS
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 25 +++++++++++++++
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 50 +++++++++++++++++++++++++++++-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 31 ++++++++++++++++++
3 files changed, 105 insertions(+), 1 deletion(-)
--
1.9.1
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 1/4] arm64: dts: fix i2c pinconf sleep state function
2015-10-08 11:18 ` Srinivas Kandagatla
@ 2015-10-08 11:19 ` Srinivas Kandagatla
-1 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:19 UTC (permalink / raw)
To: linux-arm-msm, agross
Cc: jorge.ramirez-ortiz, Rob Herring, devicetree, linux-arm-kernel,
linux-kernel, Srinivas Kandagatla
This patch fixes the i2c pinctrl sleep state by changing the pinconf
function to be in gpio mode rather than i2c.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 42941b9..a6105d7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -279,7 +279,7 @@
i2c4_sleep: i2c4_sleep {
pinmux {
- function = "blsp_i2c4";
+ function = "gpio";
pins = "gpio14", "gpio15";
};
pinconf {
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 1/4] arm64: dts: fix i2c pinconf sleep state function
@ 2015-10-08 11:19 ` Srinivas Kandagatla
0 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:19 UTC (permalink / raw)
To: linux-arm-kernel
This patch fixes the i2c pinctrl sleep state by changing the pinconf
function to be in gpio mode rather than i2c.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 42941b9..a6105d7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -279,7 +279,7 @@
i2c4_sleep: i2c4_sleep {
pinmux {
- function = "blsp_i2c4";
+ function = "gpio";
pins = "gpio14", "gpio15";
};
pinconf {
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 2/4] arm64: dts: qcom: Add msm8916 I2C nodes.
2015-10-08 11:18 ` Srinivas Kandagatla
@ 2015-10-08 11:19 ` Srinivas Kandagatla
-1 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:19 UTC (permalink / raw)
To: linux-arm-msm, agross
Cc: jorge.ramirez-ortiz, Rob Herring, devicetree, linux-arm-kernel,
linux-kernel, Srinivas Kandagatla
This patch adds missing support for i2c0 and i2c6, this support is
required to connect the i2c slaves on LS expansion on DB410c.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 48 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 31 +++++++++++++++++++
2 files changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index a6105d7..49ec55a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -265,6 +265,30 @@
};
};
+ i2c2_default: i2c2_default {
+ pinmux {
+ function = "blsp_i2c2";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c2_sleep: i2c2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
i2c4_default: i2c4_default {
pinmux {
function = "blsp_i2c4";
@@ -289,6 +313,30 @@
};
};
+ i2c6_default: i2c6_default {
+ pinmux {
+ function = "blsp_i2c6";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c6_sleep: i2c6_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
sdhc2_cd_pin {
sdc2_cd_on: cd_on {
pinmux {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 85f7bee..d49ac37 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -233,6 +233,22 @@
status = "disabled";
};
+ /* BLSP1 QUP2 */
+ blsp_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b6000 0x1000>;
+ interrupts = <GIC_SPI 96 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp_i2c4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b8000 0x1000>;
@@ -248,6 +264,21 @@
status = "disabled";
};
+ blsp_i2c6: i2c@78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78ba000 0x1000>;
+ interrupts = <GIC_SPI 100 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sdhc_1: sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 2/4] arm64: dts: qcom: Add msm8916 I2C nodes.
@ 2015-10-08 11:19 ` Srinivas Kandagatla
0 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:19 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds missing support for i2c0 and i2c6, this support is
required to connect the i2c slaves on LS expansion on DB410c.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 48 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 31 +++++++++++++++++++
2 files changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index a6105d7..49ec55a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -265,6 +265,30 @@
};
};
+ i2c2_default: i2c2_default {
+ pinmux {
+ function = "blsp_i2c2";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c2_sleep: i2c2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
i2c4_default: i2c4_default {
pinmux {
function = "blsp_i2c4";
@@ -289,6 +313,30 @@
};
};
+ i2c6_default: i2c6_default {
+ pinmux {
+ function = "blsp_i2c6";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c6_sleep: i2c6_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
sdhc2_cd_pin {
sdc2_cd_on: cd_on {
pinmux {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 85f7bee..d49ac37 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -233,6 +233,22 @@
status = "disabled";
};
+ /* BLSP1 QUP2 */
+ blsp_i2c2: i2c at 78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b6000 0x1000>;
+ interrupts = <GIC_SPI 96 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp_i2c4: i2c at 78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b8000 0x1000>;
@@ -248,6 +264,21 @@
status = "disabled";
};
+ blsp_i2c6: i2c at 78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78ba000 0x1000>;
+ interrupts = <GIC_SPI 100 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sdhc_1: sdhci at 07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 2/4] arm64: dts: qcom: Add msm8916 I2C nodes.
2015-10-08 11:19 ` Srinivas Kandagatla
@ 2015-10-08 18:17 ` Stephen Boyd
-1 siblings, 0 replies; 19+ messages in thread
From: Stephen Boyd @ 2015-10-08 18:17 UTC (permalink / raw)
To: Srinivas Kandagatla, linux-arm-msm, agross
Cc: jorge.ramirez-ortiz, Rob Herring, devicetree, linux-arm-kernel,
linux-kernel
On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 85f7bee..d49ac37 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -233,6 +233,22 @@
> status = "disabled";
> };
>
> + /* BLSP1 QUP2 */
This comment is useless.
> + blsp_i2c2: i2c@78b6000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x78b6000 0x1000>;
> + interrupts = <GIC_SPI 96 0>;
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 2/4] arm64: dts: qcom: Add msm8916 I2C nodes.
@ 2015-10-08 18:17 ` Stephen Boyd
0 siblings, 0 replies; 19+ messages in thread
From: Stephen Boyd @ 2015-10-08 18:17 UTC (permalink / raw)
To: linux-arm-kernel
On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 85f7bee..d49ac37 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -233,6 +233,22 @@
> status = "disabled";
> };
>
> + /* BLSP1 QUP2 */
This comment is useless.
> + blsp_i2c2: i2c at 78b6000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x78b6000 0x1000>;
> + interrupts = <GIC_SPI 96 0>;
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 19+ messages in thread[parent not found: <5616B353.9000207-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCH 2/4] arm64: dts: qcom: Add msm8916 I2C nodes.
2015-10-08 18:17 ` Stephen Boyd
(?)
@ 2015-10-09 8:42 ` Srinivas Kandagatla
-1 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-09 8:42 UTC (permalink / raw)
To: Stephen Boyd, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
agross-sgV2jX0FEOL9JmXXK+q4OQ
Cc: jorge.ramirez-ortiz-QSEj5FYQhm4dnm+yROfE0A, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 08/10/15 19:17, Stephen Boyd wrote:
> On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
>> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> index 85f7bee..d49ac37 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> @@ -233,6 +233,22 @@
>> status = "disabled";
>> };
>>
>> + /* BLSP1 QUP2 */
>
> This comment is useless.
Absolutely.. :-)
will fix it in next version.
--srini
>
>> + blsp_i2c2: i2c@78b6000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x78b6000 0x1000>;
>> + interrupts = <GIC_SPI 96 0>;
>>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 2/4] arm64: dts: qcom: Add msm8916 I2C nodes.
@ 2015-10-09 8:42 ` Srinivas Kandagatla
0 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-09 8:42 UTC (permalink / raw)
To: Stephen Boyd, linux-arm-msm, agross
Cc: jorge.ramirez-ortiz, Rob Herring, devicetree, linux-arm-kernel,
linux-kernel
On 08/10/15 19:17, Stephen Boyd wrote:
> On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
>> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> index 85f7bee..d49ac37 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> @@ -233,6 +233,22 @@
>> status = "disabled";
>> };
>>
>> + /* BLSP1 QUP2 */
>
> This comment is useless.
Absolutely.. :-)
will fix it in next version.
--srini
>
>> + blsp_i2c2: i2c@78b6000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x78b6000 0x1000>;
>> + interrupts = <GIC_SPI 96 0>;
>>
>
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 2/4] arm64: dts: qcom: Add msm8916 I2C nodes.
@ 2015-10-09 8:42 ` Srinivas Kandagatla
0 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-09 8:42 UTC (permalink / raw)
To: linux-arm-kernel
On 08/10/15 19:17, Stephen Boyd wrote:
> On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
>> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> index 85f7bee..d49ac37 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> @@ -233,6 +233,22 @@
>> status = "disabled";
>> };
>>
>> + /* BLSP1 QUP2 */
>
> This comment is useless.
Absolutely.. :-)
will fix it in next version.
--srini
>
>> + blsp_i2c2: i2c at 78b6000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x78b6000 0x1000>;
>> + interrupts = <GIC_SPI 96 0>;
>>
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 3/4] arm64: dts: apq8016-sbc: enable i2c buses on LS and HS
2015-10-08 11:18 ` Srinivas Kandagatla
@ 2015-10-08 11:19 ` Srinivas Kandagatla
-1 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:19 UTC (permalink / raw)
To: linux-arm-msm, agross
Cc: jorge.ramirez-ortiz, Rob Herring, devicetree, linux-arm-kernel,
linux-kernel, Srinivas Kandagatla
This patch enables i2c buses on low speed and high speed expansion
connectors on DB410C.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 3fc3be4..3581272 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -86,3 +86,18 @@
};
};
};
+
+&blsp_i2c2 {
+ /* On Low speed expansion */
+ status = "okay";
+};
+
+&blsp_i2c4 {
+ /* On High speed expansion */
+ status = "okay";
+};
+
+&blsp_i2c6 {
+ /* On Low speed expansion */
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 3/4] arm64: dts: apq8016-sbc: enable i2c buses on LS and HS
@ 2015-10-08 11:19 ` Srinivas Kandagatla
0 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:19 UTC (permalink / raw)
To: linux-arm-kernel
This patch enables i2c buses on low speed and high speed expansion
connectors on DB410C.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 3fc3be4..3581272 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -86,3 +86,18 @@
};
};
};
+
+&blsp_i2c2 {
+ /* On Low speed expansion */
+ status = "okay";
+};
+
+&blsp_i2c4 {
+ /* On High speed expansion */
+ status = "okay";
+};
+
+&blsp_i2c6 {
+ /* On Low speed expansion */
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 4/4] arm64: dts: apq8016-sbc: enable spi buses on LS and HS
2015-10-08 11:18 ` Srinivas Kandagatla
@ 2015-10-08 11:19 ` Srinivas Kandagatla
-1 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:19 UTC (permalink / raw)
To: linux-arm-msm, agross
Cc: jorge.ramirez-ortiz, Rob Herring, devicetree, linux-arm-kernel,
linux-kernel, Srinivas Kandagatla
This patch enables spi buses on low speed and high speed expansion
connectors on DB410C
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 3581272..d872654 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -92,11 +92,21 @@
status = "okay";
};
+&blsp_spi3 {
+ /* On High speed expansion */
+ status = "okay";
+};
+
&blsp_i2c4 {
/* On High speed expansion */
status = "okay";
};
+&blsp_spi5 {
+ /* On Low speed expansion */
+ status = "okay";
+};
+
&blsp_i2c6 {
/* On Low speed expansion */
status = "okay";
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 4/4] arm64: dts: apq8016-sbc: enable spi buses on LS and HS
@ 2015-10-08 11:19 ` Srinivas Kandagatla
0 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-08 11:19 UTC (permalink / raw)
To: linux-arm-kernel
This patch enables spi buses on low speed and high speed expansion
connectors on DB410C
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 3581272..d872654 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -92,11 +92,21 @@
status = "okay";
};
+&blsp_spi3 {
+ /* On High speed expansion */
+ status = "okay";
+};
+
&blsp_i2c4 {
/* On High speed expansion */
status = "okay";
};
+&blsp_spi5 {
+ /* On Low speed expansion */
+ status = "okay";
+};
+
&blsp_i2c6 {
/* On Low speed expansion */
status = "okay";
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 4/4] arm64: dts: apq8016-sbc: enable spi buses on LS and HS
2015-10-08 11:19 ` Srinivas Kandagatla
@ 2015-10-08 18:16 ` Stephen Boyd
-1 siblings, 0 replies; 19+ messages in thread
From: Stephen Boyd @ 2015-10-08 18:16 UTC (permalink / raw)
To: Srinivas Kandagatla, linux-arm-msm, agross
Cc: jorge.ramirez-ortiz, Rob Herring, devicetree, linux-arm-kernel,
linux-kernel
On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
> This patch enables spi buses on low speed and high speed expansion
> connectors on DB410C
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 3581272..d872654 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -92,11 +92,21 @@
> status = "okay";
> };
>
> +&blsp_spi3 {
> + /* On High speed expansion */
> + status = "okay";
> +};
> +
> &blsp_i2c4 {
> /* On High speed expansion */
> status = "okay";
> };
>
> +&blsp_spi5 {
> + /* On Low speed expansion */
> + status = "okay";
> +};
> +
> &blsp_i2c6 {
> /* On Low speed expansion */
> status = "okay";
We've been using absolute nodes to mark device nodes as status = "okay".
Can we keep doing that here please?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 4/4] arm64: dts: apq8016-sbc: enable spi buses on LS and HS
@ 2015-10-08 18:16 ` Stephen Boyd
0 siblings, 0 replies; 19+ messages in thread
From: Stephen Boyd @ 2015-10-08 18:16 UTC (permalink / raw)
To: linux-arm-kernel
On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
> This patch enables spi buses on low speed and high speed expansion
> connectors on DB410C
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 3581272..d872654 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -92,11 +92,21 @@
> status = "okay";
> };
>
> +&blsp_spi3 {
> + /* On High speed expansion */
> + status = "okay";
> +};
> +
> &blsp_i2c4 {
> /* On High speed expansion */
> status = "okay";
> };
>
> +&blsp_spi5 {
> + /* On Low speed expansion */
> + status = "okay";
> +};
> +
> &blsp_i2c6 {
> /* On Low speed expansion */
> status = "okay";
We've been using absolute nodes to mark device nodes as status = "okay".
Can we keep doing that here please?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 4/4] arm64: dts: apq8016-sbc: enable spi buses on LS and HS
2015-10-08 18:16 ` Stephen Boyd
@ 2015-10-09 8:42 ` Srinivas Kandagatla
-1 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-09 8:42 UTC (permalink / raw)
To: Stephen Boyd, linux-arm-msm, agross
Cc: jorge.ramirez-ortiz, Rob Herring, devicetree, linux-arm-kernel,
linux-kernel
On 08/10/15 19:16, Stephen Boyd wrote:
> On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
>> This patch enables spi buses on low speed and high speed expansion
>> connectors on DB410C
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> index 3581272..d872654 100644
>> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> @@ -92,11 +92,21 @@
>> status = "okay";
>> };
>>
>> +&blsp_spi3 {
>> + /* On High speed expansion */
>> + status = "okay";
>> +};
>> +
>> &blsp_i2c4 {
>> /* On High speed expansion */
>> status = "okay";
>> };
>>
>> +&blsp_spi5 {
>> + /* On Low speed expansion */
>> + status = "okay";
>> +};
>> +
>> &blsp_i2c6 {
>> /* On Low speed expansion */
>> status = "okay";
>
> We've been using absolute nodes to mark device nodes as status = "okay".
> Can we keep doing that here please?
Sure, I will re-spin a new version.
--srini
>
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 4/4] arm64: dts: apq8016-sbc: enable spi buses on LS and HS
@ 2015-10-09 8:42 ` Srinivas Kandagatla
0 siblings, 0 replies; 19+ messages in thread
From: Srinivas Kandagatla @ 2015-10-09 8:42 UTC (permalink / raw)
To: linux-arm-kernel
On 08/10/15 19:16, Stephen Boyd wrote:
> On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
>> This patch enables spi buses on low speed and high speed expansion
>> connectors on DB410C
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> index 3581272..d872654 100644
>> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> @@ -92,11 +92,21 @@
>> status = "okay";
>> };
>>
>> +&blsp_spi3 {
>> + /* On High speed expansion */
>> + status = "okay";
>> +};
>> +
>> &blsp_i2c4 {
>> /* On High speed expansion */
>> status = "okay";
>> };
>>
>> +&blsp_spi5 {
>> + /* On Low speed expansion */
>> + status = "okay";
>> +};
>> +
>> &blsp_i2c6 {
>> /* On Low speed expansion */
>> status = "okay";
>
> We've been using absolute nodes to mark device nodes as status = "okay".
> Can we keep doing that here please?
Sure, I will re-spin a new version.
--srini
>
^ permalink raw reply [flat|nested] 19+ messages in thread