Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory

[Lokesh Vutla <a0131933@ti.com>]

Hi Tony,

On Wednesday 14 October 2015 04:43 AM, Tony Lindgren wrote:
> On boards with more than 2GB of RAM booting goes wrong with things not working
> and we're getting lots of l3 warnings:
> 
> WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x260/0x384()
> 44000000.ocp:L3 Custom Error: MASTER MMC6 TARGET DMM1 (Idle): Data Access in User mode during Functional access
> ...
> [<c044e158>] (scsi_add_host_with_dma) from [<c04705c8>] (ata_scsi_add_hosts+0x5c/0x18c)
> [<c04705c8>] (ata_scsi_add_hosts) from [<c046b13c>] (ata_host_register+0x150/0x2cc)
> [<c046b13c>] (ata_host_register) from [<c046b38c>] (ata_host_activate+0xd4/0x124)
> [<c046b38c>] (ata_host_activate) from [<c047f42c>] (ahci_host_activate+0x5c/0x194)
> [<c047f42c>] (ahci_host_activate) from [<c0480854>] (ahci_platform_init_host+0x1f0/0x3f0)
> [<c0480854>] (ahci_platform_init_host) from [<c047c9dc>] (ahci_probe+0x70/0x98)
> [<c047c9dc>] (ahci_probe) from [<c04220cc>] (platform_drv_probe+0x54/0xb4)
> 
> Let's fix the issue by enabling ZONE_DMA for LPAE.

May I know on which platform you have reproduced this?
Just wondering what other changes you made for booting a OMAP5+ based
board with more than 2GB.

Thanks and regards,
Lokesh
> 
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>  arch/arm/mach-omap2/Kconfig | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index b3a0dff..33d1460 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -49,6 +49,7 @@ config SOC_OMAP5
>  	select OMAP_INTERCONNECT
>  	select OMAP_INTERCONNECT_BARRIER
>  	select PM_OPP if PM
> +	select ZONE_DMA if ARM_LPAE
>  
>  config SOC_AM33XX
>  	bool "TI AM33XX"
> @@ -78,6 +79,7 @@ config SOC_DRA7XX
>  	select OMAP_INTERCONNECT
>  	select OMAP_INTERCONNECT_BARRIER
>  	select PM_OPP if PM
> +	select ZONE_DMA if ARM_LPAE
>  
>  config ARCH_OMAP2PLUS
>  	bool
>