From: hauke@hauke-m.de (Hauke Mehrtens)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC] ARM: BCM: Add SMP support for Broadcom 4708
Date: Sat, 24 Oct 2015 00:38:08 +0200 [thread overview]
Message-ID: <562AB6D0.7060807@hauke-m.de> (raw)
In-Reply-To: <20151015181409.GJ32089@broadcom.com>
On 10/15/2015 08:14 PM, Jon Mason wrote:
> ARM: BCM: Add SMP support for Broadcom 4708
>
> Add SMP support for Broadcom's 4708 SoCs.
I tested this and it works on my device, it is also in OpenWrt now:
https://dev.openwrt.org/browser/trunk/target/linux/bcm53xx/patches-4.1/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch?rev=47247
>
> Signed-off-by: Jon Mason <jonmason@broadcom.com>
> ---
> arch/arm/boot/dts/bcm4708.dtsi | 2 ++
> arch/arm/boot/dts/bcm94708.dts | 2 +-
> arch/arm/mach-bcm/Kconfig | 1 +
> arch/arm/mach-bcm/Makefile | 3 +++
> 4 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
> index 31141e8..22a41df 100644
> --- a/arch/arm/boot/dts/bcm4708.dtsi
> +++ b/arch/arm/boot/dts/bcm4708.dtsi
> @@ -15,6 +15,8 @@
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> + enable-method = "brcm,bcm-nsp-smp";
> + secondary-boot-reg = <0xffff0400>;
>
> cpu at 0 {
> device_type = "cpu";
> diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> index f60bb1d..49682d6 100644
> --- a/arch/arm/boot/dts/bcm94708.dts
> +++ b/arch/arm/boot/dts/bcm94708.dts
> @@ -32,7 +32,7 @@
>
> /dts-v1/;
>
> -#include "bcm5301x.dtsi"
> +#include "bcm4708.dtsi"
This is already changed in the patch adding this file.
>
> / {
> model = "NorthStar SVK (BCM94708)";
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index 2e9dbb5..4fc8fa3 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -54,6 +54,7 @@ config ARCH_BCM_NSP
> config ARCH_BCM_5301X
> bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
> select ARCH_BCM_IPROC
> + select HAVE_SMP
probably this is also needed:
select ARM_ERRATA_764369 if SMP
The CPU should be affected by this issue.
> help
> Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
>
> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> index 36a4ca30..3ca1cf1 100644
> --- a/arch/arm/mach-bcm/Makefile
> +++ b/arch/arm/mach-bcm/Makefile
> @@ -43,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
>
> # BCM5301X
> obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
> +ifeq ($(CONFIG_ARCH_BCM_5301X),y)
> +obj-$(CONFIG_SMP) += headsmp.o platsmp.o
> +endif
>
> # BCM63XXx
> ifeq ($(CONFIG_ARCH_BCM_63XX),y)
>
WARNING: multiple messages have this Message-ID (diff)
From: Hauke Mehrtens <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>
To: Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Cc: Kapil Hali <kapilh-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Gregory Fong
<gregory.0xf0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Lee Jones <lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
Subject: Re: [RFC] ARM: BCM: Add SMP support for Broadcom 4708
Date: Sat, 24 Oct 2015 00:38:08 +0200 [thread overview]
Message-ID: <562AB6D0.7060807@hauke-m.de> (raw)
In-Reply-To: <20151015181409.GJ32089-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
On 10/15/2015 08:14 PM, Jon Mason wrote:
> ARM: BCM: Add SMP support for Broadcom 4708
>
> Add SMP support for Broadcom's 4708 SoCs.
I tested this and it works on my device, it is also in OpenWrt now:
https://dev.openwrt.org/browser/trunk/target/linux/bcm53xx/patches-4.1/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch?rev=47247
>
> Signed-off-by: Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> ---
> arch/arm/boot/dts/bcm4708.dtsi | 2 ++
> arch/arm/boot/dts/bcm94708.dts | 2 +-
> arch/arm/mach-bcm/Kconfig | 1 +
> arch/arm/mach-bcm/Makefile | 3 +++
> 4 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
> index 31141e8..22a41df 100644
> --- a/arch/arm/boot/dts/bcm4708.dtsi
> +++ b/arch/arm/boot/dts/bcm4708.dtsi
> @@ -15,6 +15,8 @@
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> + enable-method = "brcm,bcm-nsp-smp";
> + secondary-boot-reg = <0xffff0400>;
>
> cpu@0 {
> device_type = "cpu";
> diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> index f60bb1d..49682d6 100644
> --- a/arch/arm/boot/dts/bcm94708.dts
> +++ b/arch/arm/boot/dts/bcm94708.dts
> @@ -32,7 +32,7 @@
>
> /dts-v1/;
>
> -#include "bcm5301x.dtsi"
> +#include "bcm4708.dtsi"
This is already changed in the patch adding this file.
>
> / {
> model = "NorthStar SVK (BCM94708)";
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index 2e9dbb5..4fc8fa3 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -54,6 +54,7 @@ config ARCH_BCM_NSP
> config ARCH_BCM_5301X
> bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
> select ARCH_BCM_IPROC
> + select HAVE_SMP
probably this is also needed:
select ARM_ERRATA_764369 if SMP
The CPU should be affected by this issue.
> help
> Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
>
> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> index 36a4ca30..3ca1cf1 100644
> --- a/arch/arm/mach-bcm/Makefile
> +++ b/arch/arm/mach-bcm/Makefile
> @@ -43,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
>
> # BCM5301X
> obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
> +ifeq ($(CONFIG_ARCH_BCM_5301X),y)
> +obj-$(CONFIG_SMP) += headsmp.o platsmp.o
> +endif
>
> # BCM63XXx
> ifeq ($(CONFIG_ARCH_BCM_63XX),y)
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Hauke Mehrtens <hauke@hauke-m.de>
To: Jon Mason <jonmason@broadcom.com>
Cc: Kapil Hali <kapilh@broadcom.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Gregory Fong <gregory.0xf0@gmail.com>, Lee Jones <lee@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Kever Yang <kever.yang@rock-chips.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Olof Johansson <olof@lixom.net>, Paul Walmsley <paul@pwsan.com>,
Linus Walleij <linus.walleij@linaro.org>,
Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com
Subject: Re: [RFC] ARM: BCM: Add SMP support for Broadcom 4708
Date: Sat, 24 Oct 2015 00:38:08 +0200 [thread overview]
Message-ID: <562AB6D0.7060807@hauke-m.de> (raw)
In-Reply-To: <20151015181409.GJ32089@broadcom.com>
On 10/15/2015 08:14 PM, Jon Mason wrote:
> ARM: BCM: Add SMP support for Broadcom 4708
>
> Add SMP support for Broadcom's 4708 SoCs.
I tested this and it works on my device, it is also in OpenWrt now:
https://dev.openwrt.org/browser/trunk/target/linux/bcm53xx/patches-4.1/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch?rev=47247
>
> Signed-off-by: Jon Mason <jonmason@broadcom.com>
> ---
> arch/arm/boot/dts/bcm4708.dtsi | 2 ++
> arch/arm/boot/dts/bcm94708.dts | 2 +-
> arch/arm/mach-bcm/Kconfig | 1 +
> arch/arm/mach-bcm/Makefile | 3 +++
> 4 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
> index 31141e8..22a41df 100644
> --- a/arch/arm/boot/dts/bcm4708.dtsi
> +++ b/arch/arm/boot/dts/bcm4708.dtsi
> @@ -15,6 +15,8 @@
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> + enable-method = "brcm,bcm-nsp-smp";
> + secondary-boot-reg = <0xffff0400>;
>
> cpu@0 {
> device_type = "cpu";
> diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> index f60bb1d..49682d6 100644
> --- a/arch/arm/boot/dts/bcm94708.dts
> +++ b/arch/arm/boot/dts/bcm94708.dts
> @@ -32,7 +32,7 @@
>
> /dts-v1/;
>
> -#include "bcm5301x.dtsi"
> +#include "bcm4708.dtsi"
This is already changed in the patch adding this file.
>
> / {
> model = "NorthStar SVK (BCM94708)";
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index 2e9dbb5..4fc8fa3 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -54,6 +54,7 @@ config ARCH_BCM_NSP
> config ARCH_BCM_5301X
> bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
> select ARCH_BCM_IPROC
> + select HAVE_SMP
probably this is also needed:
select ARM_ERRATA_764369 if SMP
The CPU should be affected by this issue.
> help
> Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
>
> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> index 36a4ca30..3ca1cf1 100644
> --- a/arch/arm/mach-bcm/Makefile
> +++ b/arch/arm/mach-bcm/Makefile
> @@ -43,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
>
> # BCM5301X
> obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
> +ifeq ($(CONFIG_ARCH_BCM_5301X),y)
> +obj-$(CONFIG_SMP) += headsmp.o platsmp.o
> +endif
>
> # BCM63XXx
> ifeq ($(CONFIG_ARCH_BCM_63XX),y)
>
next prev parent reply other threads:[~2015-10-23 22:38 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 17:46 [PATCH 0/3] SMP support for Broadcom NSP Kapil Hali
2015-10-14 17:46 ` Kapil Hali
2015-10-14 17:46 ` Kapil Hali
2015-10-14 17:46 ` [PATCH 1/3] dt-bindings: add SMP enable-method " Kapil Hali
2015-10-14 17:46 ` Kapil Hali
2015-10-14 17:46 ` Kapil Hali
2015-10-14 22:27 ` Hauke Mehrtens
2015-10-14 22:27 ` Hauke Mehrtens
2015-10-14 22:27 ` Hauke Mehrtens
2015-10-15 16:13 ` Kapil Hali
2015-10-15 16:13 ` Kapil Hali
2015-10-15 16:13 ` Kapil Hali
2015-10-14 17:46 ` [PATCH 2/3] ARM: dts: add SMP support " Kapil Hali
2015-10-14 17:46 ` Kapil Hali
2015-10-14 17:46 ` Kapil Hali
2015-10-14 17:47 ` [PATCH 3/3] ARM: BCM: Add " Kapil Hali
2015-10-14 17:47 ` Kapil Hali
2015-10-14 17:47 ` Kapil Hali
2015-10-14 22:26 ` Hauke Mehrtens
2015-10-14 22:26 ` Hauke Mehrtens
2015-10-14 22:26 ` Hauke Mehrtens
2015-10-14 22:40 ` Jon Mason
2015-10-14 22:40 ` Jon Mason
2015-10-14 22:40 ` Jon Mason
2015-10-15 15:49 ` Jon Mason
2015-10-15 15:49 ` Jon Mason
2015-10-15 15:49 ` Jon Mason
2015-10-15 18:14 ` [RFC] ARM: BCM: Add SMP support for Broadcom 4708 Jon Mason
2015-10-15 18:14 ` Jon Mason
2015-10-15 18:35 ` Scott Branden
2015-10-15 18:35 ` Scott Branden
2015-10-15 18:35 ` Scott Branden
2015-10-23 22:38 ` Hauke Mehrtens [this message]
2015-10-23 22:38 ` Hauke Mehrtens
2015-10-23 22:38 ` Hauke Mehrtens
2015-10-15 16:10 ` [PATCH 3/3] ARM: BCM: Add SMP support for Broadcom NSP Kapil Hali
2015-10-15 16:10 ` Kapil Hali
2015-10-15 16:10 ` Kapil Hali
2015-10-15 21:12 ` Hauke Mehrtens
2015-10-15 21:12 ` Hauke Mehrtens
2015-10-15 21:12 ` Hauke Mehrtens
2015-10-15 21:17 ` Jon Mason
2015-10-15 21:17 ` Jon Mason
2015-10-15 21:17 ` Jon Mason
2015-10-28 14:24 ` Kapil Hali
2015-10-28 14:24 ` Kapil Hali
2015-10-28 14:24 ` Kapil Hali
2015-10-28 19:10 ` Hauke Mehrtens
2015-10-28 19:10 ` Hauke Mehrtens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=562AB6D0.7060807@hauke-m.de \
--to=hauke@hauke-m.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.