* Re: DPDK ArmV7 autotests
2015-11-09 17:26 ` Hunt, David
@ 2015-11-09 17:46 ` Jan Viktorin
2015-11-10 10:22 ` Hunt, David
0 siblings, 1 reply; 6+ messages in thread
From: Jan Viktorin @ 2015-11-09 17:46 UTC (permalink / raw)
To: Hunt, David; +Cc: dev
Here is the log. You an see, that many tests fail just because
of the missing hugetlb support. This is strange as I modified the
autotest_runner.py to inject "--no-huge --no-pci" options when it
detects armv7 architecture.
Moreover, the mempool performance test does not say OK. It is marked as
Timeout in the CSV.
Summary
Target: armv7l-unknown-4.2.0
Tests: 52
Failed tests: 27
==================== group_1
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: TSC frequency is ~999784 KHz
EAL: Master lcore 0 is ready (tid=76f89000;cpuset=[0])
EAL: lcore 1 is ready (tid=75bc82c0;cpuset=[1])
EAL: lcore 3 is ready (tid=74bc82c0;cpuset=[3])
EAL: lcore 2 is ready (tid=753c82c0;cpuset=[2])
APP: HPET is not enabled, using TSC as default timer
-------------------- Timer autotest
Test OK
Test OK
-------------------- Debug autotest
Test OK
-------------------- Errno autotest
Test OK
-------------------- Meter autotest
Test OK
-------------------- Common autotest
Test OK
-------------------- Dump log history
dump_log_history
-------------------- Dump rings
dump_ring
-------------------- Dump mempools
dump_mempool
==================== group_2
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: TSC frequency is ~999984 KHz
EAL: Master lcore 0 is ready (tid=76f23000;cpuset=[0])
EAL: lcore 1 is ready (tid=723622c0;cpuset=[1])
EAL: lcore 2 is ready (tid=71b622c0;cpuset=[2])
EAL: lcore 3 is ready (tid=713622c0;cpuset=[3])
APP: HPET is not enabled, using TSC as default timer
-------------------- Memory autotest
Test OK
-------------------- Read/write lock autotest
Test OK
-------------------- Logs autotest
Test OK
-------------------- CPU flags autotest
Test OK
-------------------- Version autotest
Test OK
-------------------- EAL filesystem autotest
Test OK
-------------------- EAL flags autotest
eal_flags_autotest
eal_flags_autotest
Running binary with argv[]:'/usr/dpdk/test' '--file-prefix=uxv' '--proc-type=secondary' '-n' '3'
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
PANIC in rte_eal_config_attach():
Cannot open '/var/run/.uxv_config' for rte_mem_config
Error - process did not run ok when missing -c flag
Error in test_missing_c_flag()
Test Failed
-------------------- Hash autotest
hash_autotest
hash_autotest
# Testing hash creation with invalid parameters - expect error msgs
ERROR line 795: fbk hash creation should have failed
Test Failed
==================== group_3
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== group_4
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: TSC frequency is ~999942 KHz
EAL: Master lcore 0 is ready (tid=76f18000;cpuset=[0])
EAL: lcore 1 is ready (tid=6e3572c0;cpuset=[1])
EAL: lcore 2 is ready (tid=6db572c0;cpuset=[2])
EAL: lcore 3 is ready (tid=6d3572c0;cpuset=[3])
APP: HPET is not enabled, using TSC as default timer
-------------------- PCI autotest
pci_autotest
pci_autotest
Dump all devices
Scan bus
no device detected
Test Failed
-------------------- Malloc autotest
Test OK
-------------------- Multi-process autotest
multiprocess_autotest
multiprocess_autotest
=== Running pre-requisite test of test_pci
Dump all devices
Scan bus
no device detected
=== Requisite test done
Running binary with argv[]:'/usr/dpdk/test' '-c' '1' '--proc-type=secondary' '--file-prefix=uxv'
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
PANIC in rte_eal_config_attach():
Cannot open '/var/run/.uxv_config' for rte_mem_config
Running binary with argv[]:'/usr/dpdk/test' '-c' '1' '--proc-type=auto' '--file-prefix=uxv'
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Auto-detected process type: PRIMARY
PANIC in eal_hugepage_info_init():
Cannot open directory /sys/kernel/mm/hugepages to read system hugepage info
Running binary with argv[]:'/usr/dpdk/test' '-c' '1' '--proc-type=ERROR' '--file-prefix=uxv'
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Invalid process type specified
Usage: /usr/dpdk/test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 128
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
--master-lcore ID Core ID that is used as master
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --pci-blacklist Add a PCI device in black list.
Prevent EAL from using this PCI device. The argument
format is <domain:bus:devid.func>.
-w, --pci-whitelist Add a PCI device in white list.
Only use the specified PCI devices. The argument format
is <[domain:]bus:devid.func>. This option can be present
several times (once per device).
[NOTE: PCI whitelist cannot be used with -b option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=eth_pcap0,iface=eth2).
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level Set default log level
-v Display version information on startup
-h, --help This help
EAL options for DEBUG use only:
--huge-unlink Unlink hugepage files after init
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
-d LIB.so Add driver (can be used multiple times)
--socket-mem Memory to allocate on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--base-virtaddr Base virtual address
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--xen-dom0 Support running on Xen dom0 without hugetlbfs
Running binary with argv[]:'/usr/dpdk/test' '-c' '1' '--proc-type=secondary' '--file-prefix=ERROR'
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
PANIC in rte_eal_config_attach():
Cannot open '/var/run/.ERROR_config' for rte_mem_config
Test Failed
-------------------- Mbuf autotest
Test OK
-------------------- Per-lcore autotest
Test OK
-------------------- Ring autotest
Test OK
==================== group_5
Test OK
-------------------- Byte order autotest
Test OK
-------------------- TAILQ autotest
Test OK
-------------------- Command-line autotest
Test OK
-------------------- Interrupts autotest
Test OK
==================== group_6
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== group_7
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: TSC frequency is ~999972 KHz
EAL: Master lcore 0 is ready (tid=76fc1000;cpuset=[0])
EAL: lcore 1 is ready (tid=5d4002c0;cpuset=[1])
EAL: lcore 2 is ready (tid=5cc002c0;cpuset=[2])
EAL: lcore 3 is ready (tid=5c4002c0;cpuset=[3])
APP: HPET is not enabled, using TSC as default timer
-------------------- PMD ring autotest
ring_pmd_autotest
ring_pmd_autotest
Configure failed for TX port
Test Failed
-------------------- Access list control autotest
acl_autotest
acl_autotest
Command not found
-------------------- Sched autotest
Test OK
==================== kni
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== mempool_perf
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: TSC frequency is ~999968 KHz
EAL: Master lcore 0 is ready (tid=76fa1000;cpuset=[0])
EAL: lcore 1 is ready (tid=663e02c0;cpuset=[1])
EAL: lcore 2 is ready (tid=65be02c0;cpuset=[2])
EAL: lcore 3 is ready (tid=653e02c0;cpuset=[3])
APP: HPET is not enabled, using TSC as default timer
-------------------- Cycles autotest
Test OK
-------------------- Mempool performance autotest
mempool_perf_autotest
mempool_perf_autotest
start performance test (without cache)
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=1 n_keep=32 rate_persec=1481113
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=1 n_keep=128 rate_persec=1114112
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=4 n_keep=32 rate_persec=1900544
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=4 n_keep=128 rate_persec=2883584
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=32 n_keep=32 rate_persec=3748659
mempool_autotest cache=0 cores=1 n_get_bulk=1 n_put_bulk=32 n_keep=128 rate_persec=3040870
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=1 n_keep=32 rate_persec=2398617
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=1 n_keep=128 rate_persec=2555904
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=4 n_keep=32 rate_persec=8296857
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=4 n_keep=128 rate_persec=7208960
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=32 n_keep=32 rate_persec=9502720
mempool_autotest cache=0 cores=1 n_get_bulk=4 n_put_bulk=32 n_keep=128 rate_persec=9673113
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=1 n_keep=32 rate_persec=2411724
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=1 n_keep=128 rate_persec=2673868
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=4 n_keep=32 rate_persec=15741747
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=4 n_keep=128 rate_persec=16960716
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=32 n_keep=32 rate_persec=32597606
mempool_autotest cache=0 cores=1 n_get_bulk=32 n_put_bulk=32 n_keep=128 rate_persec=25493504
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=1 n_keep=32 rate_persec=26214
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=1 n_keep=128 rate_persec=39321
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=4 n_keep=32 rate_persec=39321
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=4 n_keep=128 rate_persec=65535
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=32 n_keep=32 rate_persec=78642
mempool_autotest cache=0 cores=2 n_get_bulk=1 n_put_bulk=32 n_keep=128 rate_persec=104856
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=1 n_keep=32 rate_persec=52428
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=1 n_keep=128 rate_persec=26214
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=4 n_keep=32 rate_persec=104857
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=4 n_keep=128 rate_persec=52428
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=32 n_keep=32 rate_persec=235928
mempool_autotest cache=0 cores=2 n_get_bulk=4 n_put_bulk=32 n_keep=128 rate_persec=117964
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=1 n_keep=32 rate_persec=52428
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=1 n_keep=128 rate_persec=39321
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=4 n_keep=32 rate_persec=262144
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=4 n_keep=128 rate_persec=117964
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=32 n_keep=32 rate_persec=471858
mempool_autotest cache=0 cores=2 n_get_bulk=32 n_put_bulk=32 n_keep=128 rate_persec=262143
==================== memcpy_perf
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== hash_perf
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== power
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== power_acpi_cpufreq
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== power_kvm_vm
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== lpm6
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== timer_perf
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
==================== ring_perf
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: rte_eal_hugepage_init: mmap() failed: Cannot allocate memory
PANIC in rte_eal_init():
Cannot init memory
Regards
Jan
On Mon, 9 Nov 2015 17:26:21 +0000
"Hunt, David" <david.hunt@intel.com> wrote:
> On 09/11/2015 17:12, Jan Viktorin wrote:
> > Hello David,
> >
> > I am working on some auto test in QEMU. My last result for ARMv7 is
> > following bellow. What is strange, I could see that the read/write lock
> > autotest failed (wrong order) before.
> >
> > I have no idea what does it mean "no prompt". I suppose that such test
> > could not be run for some reason...
>
> The no prompt occurs when the 'test' binary (which is used to run each
> autotest in turn) exits before it gets to the prompt, so the test cannot
> be run. Usually this is because of lack of resources such as memory, PCI
> or similar. I had to reduce the memory requirements from 1024M to 512M
> to get one section of tests to pass (in autotest_data.py).
>
> For more information on why the autotests are failing, you can check the
> log file in the directory for that autotest run -
> arm-armv7a-linux-app-gcc/autotest-date/arm-armv7a-linuxapp-gcc.log
>
>
> >
> > I had to slightly modify the autotest.py to run properly.
> >
> > The test was executed in qemu:
> >
> > qemu-system-arm -M vexpress-a9 -kernel zImage \
> > -dtb vexpress-v2p-ca9.dtb -drive file=rootfs.ext2,if=sd \
> > -append "console=ttyAMA0 root=/dev/mmcblk0 rw" -smp 4 -m 512 -nographic
> >
> > with the Linux Kernel 4.2.
> >
> >
> > Test name Test result Test Total
> > ================================================================================
> > Bits 55-60 of /proc/PID/pagemap entries are about to stop being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt for details.
> >
> > Start group_1: Success [00m 08s]
> > Timer autotest: Success [00m 52s]
> > Debug autotest: Success [00m 01s]
> > Errno autotest: Success [00m 00s]
> > Meter autotest: Success [00m 01s]
> > Common autotest: Success [00m 28s]
> > Dump log history: Success [00m 00s]
> > Dump rings: Success [00m 00s]
> > Dump mempools: Success [00m 00s] [01m 34s]
> > Start group_2: Success [00m 00s]
> > Memory autotest: Success [00m 01s]
> > Read/write lock autotest: Success [00m 00s]
> > Logs autotest: Success [00m 00s]
> > CPU flags autotest: Success [00m 00s]
> > Version autotest: Success [00m 00s]
> > EAL filesystem autotest: Success [00m 00s]
> > EAL flags autotest: Fail [00m 00s]
> > Hash autotest: Fail [00m 00s] [01m 38s]
> > Start group_3: Fail [No prompt] [00m 00s]
> > LPM autotest: Fail [No prompt] [00m 00s]
> > IVSHMEM autotest: Fail [No prompt] [00m 00s]
> > Memcpy autotest: Fail [No prompt] [00m 00s]
> > Memzone autotest: Fail [No prompt] [00m 00s]
> > String autotest: Fail [No prompt] [00m 00s]
> > Alarm autotest: Fail [No prompt] [00m 00s] [01m 39s]
> > Start group_4: Success [00m 00s]
> > PCI autotest: Fail [00m 00s]
> > Malloc autotest: Success [00m 12s]
> > Multi-process autotest: Fail [00m 01s]
> > Mbuf autotest: Success [02m 18s]
> > Per-lcore autotest: Success [00m 05s]
> > Ring autotest: Success [00m 02s] [04m 19s]
> > Start group_5: Success [00m 00s]
> > Spinlock autotest: Success [00m 15s]
> > Byte order autotest: Success [00m 00s]
> > TAILQ autotest: Success [00m 00s]
> > Command-line autotest: Success [00m 00s]
> > Interrupts autotest: Success [00m 08s] [04m 45s]
> > Start group_6: Fail [No prompt] [00m 00s]
> > Function reentrancy autotest: Fail [No prompt] [00m 00s]
> > Mempool autotest: Fail [No prompt] [00m 00s]
> > Atomics autotest: Fail [No prompt] [00m 00s]
> > Prefetch autotest: Fail [No prompt] [00m 00s]
> > Red autotest: Fail [No prompt] [00m 00s] [04m 45s]
> > Start group_7: Success [00m 00s]
> > PMD ring autotest: Fail [00m 00s]
> > Access list control autotest: Fail [Not found] [00m 00s]
> > Sched autotest: Success [00m 00s] [04m 48s]
> > Start kni: Fail [No prompt] [00m 00s]
> > KNI autotest: Fail [No prompt] [00m 00s] [04m 48s]
> > Start mempool_perf: Success [00m 00s]
> > Cycles autotest: Success [00m 01s]
> > Mempool performance autotest: Fail [Timeout] [15m 00s] [19m 50s]
> > Start memcpy_perf: Fail [No prompt] [00m 00s]
> > Memcpy performance autotest: Fail [No prompt] [00m 00s] [19m 50s]
> > Start hash_perf: Fail [No prompt] [00m 00s]
> > Hash performance autotest: Fail [No prompt] [00m 00s] [19m 51s]
> > Start power: Fail [No prompt] [00m 00s]
> > Power autotest: Fail [No prompt] [00m 00s] [19m 51s]
> > Start power_acpi_cpufreq: Fail [No prompt] [00m 00s]
> > Power ACPI cpufreq autotest: Fail [No prompt] [00m 00s] [19m 52s]
> > Start power_kvm_vm: Fail [No prompt] [00m 00s]
> > Power KVM VM autotest: Fail [No prompt] [00m 00s] [19m 52s]
> > Start lpm6: Fail [No prompt] [00m 00s]
> > LPM6 autotest: Fail [No prompt] [00m 00s] [19m 52s]
> > Start timer_perf: Fail [No prompt] [00m 00s]
> > Timer performance autotest: Fail [No prompt] [00m 00s] [19m 53s]
> > Start ring_perf: Fail [No prompt] [00m 00s]
> > Ring performance autotest: Fail [No prompt] [00m 00s] [19m 53s]
> > ================================================================================
> > Total run time: 19m 53s
> > Number of failed tests: 27
> > =============================
> >
> > Regards
> > Jan
> >
> > On Mon, 9 Nov 2015 16:35:34 +0000
> > "Hunt, David" <david.hunt@intel.com> wrote:
> >
> >> Jan,
> >> I'm running some of the autotests, and I've got the following
> >> passes/fails. Have you run any of the failing tests on your platform? Do
> >> they pass?
> >> Dave.
> >>
> >> dpdk# make -C arm-armv7a-linuxapp-gcc fast_test
> >> Test name Test result Test Total
> >> =================================================================
> >> Timer autotest: Success [00m 42s]
> >> Debug autotest: Success [00m 00s]
> >> Errno autotest: Success [00m 00s]
> >> Meter autotest: Success [00m 00s]
> >> Common autotest: Success [00m 03s]
> >> Dump log history: Success [00m 00s]
> >> Dump rings: Success [00m 00s]
> >> Dump mempools: Success [00m 00s] [00m 50s]
> >> Memory autotest: Success [00m 00s]
> >> Read/write lock autotest: Success [00m 00s]
> >> Logs autotest: Success [00m 00s]
> >> CPU flags autotest: Success [00m 00s]
> >> Version autotest: Success [00m 00s]
> >> EAL filesystem autotest: Success [00m 00s]
> >> EAL flags autotest: Fail [Broken Test]
> >> Hash autotest: Fail [00m 00s] [00m 53s]
> >> LPM autotest: Fail [Not found] [00m 00s]
> >> IVSHMEM autotest: Fail [Not found] [00m 00s]
> >> Memcpy autotest: Success [00m 51s]
> >> Memzone autotest: Fail [00m 00s]
> >> String autotest: Success [00m 00s]
> >> Alarm autotest: Success [00m 16s] [02m 03s]
> >> PCI autotest: Fail [No PCI present]
> >> Malloc autotest: Success [00m 04s]
> >> Multi-process autotest: Fail [No PCI present]
> >> Mbuf autotest: Success [01m 00s]
> >> Per-lcore autotest: Success [00m 05s]
> >> Ring autotest: Success [00m 02s] [03m 21s]
> >> Spinlock autotest: Success [00m 15s]
> >> Byte order autotest: Success [00m 00s]
> >> TAILQ autotest: Success [00m 00s]
> >> Command-line autotest: Success [00m 00s]
> >> Interrupts autotest: Success [00m 08s] [03m 48s]
> >> Function reentrancy autotest: Success [00m 00s]
> >> Mempool autotest: Success (Manual Execution)
> >> Atomics autotest: Success [00m 00s]
> >> Prefetch autotest: Success [00m 00s]
> >> Red autotest: Success [07m 22s] [11m 13s]
> >> PMD ring autotest: N/A Needs port
> >> Sched autotest: Success [00m 00s] [11m 16s]
> >> Cycles autotest: Success [00m 01s] [11m 21s]
> >> Power autotest: Success [00m 00s] [11m 23s]
> >> Power ACPI cpufreq autotest: Success [00m 00s] [11m 25s]
> >> ====================================================================
> >
> >
> >
>
--
Jan Viktorin E-mail: Viktorin@RehiveTech.com
System Architect Web: www.RehiveTech.com
RehiveTech
Brno, Czech Republic
^ permalink raw reply [flat|nested] 6+ messages in thread