[PATCH v4 RESEND 0/11] x86/mm: Handle large PAT bit in pud/pmd interfaces

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v4 RESEND 0/11] x86/mm: Handle large PAT bit in pud/pmd interfaces
@ 2015-09-17 18:24 ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott

The PAT bit gets relocated to bit 12 when PUD/PMD mappings are used.  This
bit 12, however, is not covered by PTE_FLAGS_MASK, which is corrently used
by masking pfn and flags for all levels.  This patch-set updates pud/pmd
interfaces and multiple functions to handle the large PAT bit properly.

Patch 1/11-2/11 make changes necessary for patch 3/11 to use P?D_PAGE_MASK.

Patch 3/11-4/11 fix pud/pmd interfaces to handle the PAT bit properly.

Patch 5/11 adds p?d_pgprot() interfaces for PUD/PMD.

Patch 6/11 fixes /sys/kernel/debug/kernel_page_tables to show the PAT bit
properly.

Patch 7/11-10/11 fix multiple functions to handle the large PAT bit properly.

Patch 11/11 fixes the no-change case in try_preserve_large_page() by
leveraging the changes made in patch 9/11.

Note, the PAT bit is first enabled in 4.2-rc1 with WT mapping.  The functions
fixed by patch 7/11-10/11 are not used with WT mapping yet.  These fixes will
protect them from the future use of the PAT bit set.

The patchset is based on the -tip branch.

---
RESEND:
 - Rebased to 4.3-rc1 -tip branch. No conflict.

v4:
 - Add descriptions of the issue fixed by patch 01/11 (Thomas Gleixner).
 - Split patch 03 into two patches, mask changes & pud/pmd interface changes.
   (Thomas Gleixner).

v3:
 - Add patch 4/11 and 6/11-9/11 for multiple interfaces to handle the large
   PAT bit.
 - Add patch 11/11 to fix the same pgprot handling in
   try_preserve_large_page().

v2:
 - Change p?n_pfn() to handle the PAT bit. (Juergen Gross)
 - Mask pfn and flags with P?D_PAGE_MASK. (Juergen Gross)
 - Change p?d_page_vaddr() and p?d_page() to handle the PAT bit.

---
Toshi Kani (11):
  1/11 x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO
  2/11 x86/asm: Move PUD_PAGE macros to page_types.h
  3/11 x86/asm: Add pud/pmd mask interfaces to handle large PAT bit
  4/11 x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  5/11 x86/asm: Add pud_pgprot() and pmd_pgprot()
  6/11 x86/mm: Fix page table dump to show PAT bit
  7/11 x86/mm: Fix slow_virt_to_phys() to handle large PAT bit
  8/11 x86/mm: Fix gup_huge_p?d() to handle large PAT bit
  9/11 x86/mm: Fix try_preserve_large_page() to handle large PAT bit
 10/11 x86/mm: Fix __split_large_page() to handle large PAT bit
 11/11 x86/mm: Fix no-change case in try_preserve_large_page()

---
 arch/x86/entry/vdso/vdso32/vclock_gettime.c |  2 +
 arch/x86/include/asm/page_64_types.h        |  3 --
 arch/x86/include/asm/page_types.h           |  3 ++
 arch/x86/include/asm/pgtable.h              | 18 ++++---
 arch/x86/include/asm/pgtable_types.h        | 40 +++++++++++++--
 arch/x86/mm/dump_pagetables.c               | 39 +++++++-------
 arch/x86/mm/gup.c                           | 18 +++----
 arch/x86/mm/pageattr.c                      | 79 ++++++++++++++++++-----------
 8 files changed, 131 insertions(+), 71 deletions(-)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 0/11] x86/mm: Handle large PAT bit in pud/pmd interfaces
@ 2015-09-17 18:24 ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott

The PAT bit gets relocated to bit 12 when PUD/PMD mappings are used.  This
bit 12, however, is not covered by PTE_FLAGS_MASK, which is corrently used
by masking pfn and flags for all levels.  This patch-set updates pud/pmd
interfaces and multiple functions to handle the large PAT bit properly.

Patch 1/11-2/11 make changes necessary for patch 3/11 to use P?D_PAGE_MASK.

Patch 3/11-4/11 fix pud/pmd interfaces to handle the PAT bit properly.

Patch 5/11 adds p?d_pgprot() interfaces for PUD/PMD.

Patch 6/11 fixes /sys/kernel/debug/kernel_page_tables to show the PAT bit
properly.

Patch 7/11-10/11 fix multiple functions to handle the large PAT bit properly.

Patch 11/11 fixes the no-change case in try_preserve_large_page() by
leveraging the changes made in patch 9/11.

Note, the PAT bit is first enabled in 4.2-rc1 with WT mapping.  The functions
fixed by patch 7/11-10/11 are not used with WT mapping yet.  These fixes will
protect them from the future use of the PAT bit set.

The patchset is based on the -tip branch.

---
RESEND:
 - Rebased to 4.3-rc1 -tip branch. No conflict.

v4:
 - Add descriptions of the issue fixed by patch 01/11 (Thomas Gleixner).
 - Split patch 03 into two patches, mask changes & pud/pmd interface changes.
   (Thomas Gleixner).

v3:
 - Add patch 4/11 and 6/11-9/11 for multiple interfaces to handle the large
   PAT bit.
 - Add patch 11/11 to fix the same pgprot handling in
   try_preserve_large_page().

v2:
 - Change p?n_pfn() to handle the PAT bit. (Juergen Gross)
 - Mask pfn and flags with P?D_PAGE_MASK. (Juergen Gross)
 - Change p?d_page_vaddr() and p?d_page() to handle the PAT bit.

---
Toshi Kani (11):
  1/11 x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO
  2/11 x86/asm: Move PUD_PAGE macros to page_types.h
  3/11 x86/asm: Add pud/pmd mask interfaces to handle large PAT bit
  4/11 x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  5/11 x86/asm: Add pud_pgprot() and pmd_pgprot()
  6/11 x86/mm: Fix page table dump to show PAT bit
  7/11 x86/mm: Fix slow_virt_to_phys() to handle large PAT bit
  8/11 x86/mm: Fix gup_huge_p?d() to handle large PAT bit
  9/11 x86/mm: Fix try_preserve_large_page() to handle large PAT bit
 10/11 x86/mm: Fix __split_large_page() to handle large PAT bit
 11/11 x86/mm: Fix no-change case in try_preserve_large_page()

---
 arch/x86/entry/vdso/vdso32/vclock_gettime.c |  2 +
 arch/x86/include/asm/page_64_types.h        |  3 --
 arch/x86/include/asm/page_types.h           |  3 ++
 arch/x86/include/asm/pgtable.h              | 18 ++++---
 arch/x86/include/asm/pgtable_types.h        | 40 +++++++++++++--
 arch/x86/mm/dump_pagetables.c               | 39 +++++++-------
 arch/x86/mm/gup.c                           | 18 +++----
 arch/x86/mm/pageattr.c                      | 79 ++++++++++++++++++-----------
 8 files changed, 131 insertions(+), 71 deletions(-)

^ permalink raw reply	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 1/11] x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

In case of CONFIG_X86_64, vdso32/vclock_gettime.c fakes a 32-bit
non-PAE kernel configuration by re-defining it to CONFIG_X86_32.
However, it does not re-define CONFIG_PGTABLE_LEVELS leaving it
as 4 levels.

This mismatch leads <asm/pgtable_type.h> to NOT include <asm-generic/
pgtable-nopud.h> and <asm-generic/pgtable-nopmd.h>, which will cause
compile errors when a later patch enhances <asm/pgtable_type.h> to
use PUD_SHIFT and PMD_SHIFT.  These -nopud & -nopmd headers define
these SHIFTs for the 32-bit non-PAE kernel.

Fix it by re-defining CONFIG_PGTABLE_LEVELS to 2 levels.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/entry/vdso/vdso32/vclock_gettime.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/entry/vdso/vdso32/vclock_gettime.c b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
index 175cc72..87a86e0 100644
--- a/arch/x86/entry/vdso/vdso32/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
@@ -14,11 +14,13 @@
  */
 #undef CONFIG_64BIT
 #undef CONFIG_X86_64
+#undef CONFIG_PGTABLE_LEVELS
 #undef CONFIG_ILLEGAL_POINTER_VALUE
 #undef CONFIG_SPARSEMEM_VMEMMAP
 #undef CONFIG_NR_CPUS
 
 #define CONFIG_X86_32 1
+#define CONFIG_PGTABLE_LEVELS 2
 #define CONFIG_PAGE_OFFSET 0
 #define CONFIG_ILLEGAL_POINTER_VALUE 0
 #define CONFIG_NR_CPUS 1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 1/11] x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

In case of CONFIG_X86_64, vdso32/vclock_gettime.c fakes a 32-bit
non-PAE kernel configuration by re-defining it to CONFIG_X86_32.
However, it does not re-define CONFIG_PGTABLE_LEVELS leaving it
as 4 levels.

This mismatch leads <asm/pgtable_type.h> to NOT include <asm-generic/
pgtable-nopud.h> and <asm-generic/pgtable-nopmd.h>, which will cause
compile errors when a later patch enhances <asm/pgtable_type.h> to
use PUD_SHIFT and PMD_SHIFT.  These -nopud & -nopmd headers define
these SHIFTs for the 32-bit non-PAE kernel.

Fix it by re-defining CONFIG_PGTABLE_LEVELS to 2 levels.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/entry/vdso/vdso32/vclock_gettime.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/entry/vdso/vdso32/vclock_gettime.c b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
index 175cc72..87a86e0 100644
--- a/arch/x86/entry/vdso/vdso32/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
@@ -14,11 +14,13 @@
  */
 #undef CONFIG_64BIT
 #undef CONFIG_X86_64
+#undef CONFIG_PGTABLE_LEVELS
 #undef CONFIG_ILLEGAL_POINTER_VALUE
 #undef CONFIG_SPARSEMEM_VMEMMAP
 #undef CONFIG_NR_CPUS

 #define CONFIG_X86_32 1
+#define CONFIG_PGTABLE_LEVELS 2
 #define CONFIG_PAGE_OFFSET 0
 #define CONFIG_ILLEGAL_POINTER_VALUE 0
 #define CONFIG_NR_CPUS 1

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:42   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:42 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: toshi.kani, elliott, mingo, mingo, linux-kernel, jgross,
	konrad.wilk, hpa, tglx, bp, akpm

Commit-ID:  fb535ccb30845fe0b7bd09caa37a838985b72ff9
Gitweb:     http://git.kernel.org/tip/fb535ccb30845fe0b7bd09caa37a838985b72ff9
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:14 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:32 +0200

x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO

In case of CONFIG_X86_64, vdso32/vclock_gettime.c fakes a 32-bit
non-PAE kernel configuration by re-defining it to CONFIG_X86_32.
However, it does not re-define CONFIG_PGTABLE_LEVELS leaving it
as 4 levels.

This mismatch leads <asm/pgtable_type.h> to NOT include <asm-generic/
pgtable-nopud.h> and <asm-generic/pgtable-nopmd.h>, which will cause
compile errors when a later patch enhances <asm/pgtable_type.h> to
use PUD_SHIFT and PMD_SHIFT.  These -nopud & -nopmd headers define
these SHIFTs for the 32-bit non-PAE kernel.

Fix it by re-defining CONFIG_PGTABLE_LEVELS to 2 levels.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-2-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/entry/vdso/vdso32/vclock_gettime.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/entry/vdso/vdso32/vclock_gettime.c b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
index 175cc72..87a86e0 100644
--- a/arch/x86/entry/vdso/vdso32/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
@@ -14,11 +14,13 @@
  */
 #undef CONFIG_64BIT
 #undef CONFIG_X86_64
+#undef CONFIG_PGTABLE_LEVELS
 #undef CONFIG_ILLEGAL_POINTER_VALUE
 #undef CONFIG_SPARSEMEM_VMEMMAP
 #undef CONFIG_NR_CPUS
 
 #define CONFIG_X86_32 1
+#define CONFIG_PGTABLE_LEVELS 2
 #define CONFIG_PAGE_OFFSET 0
 #define CONFIG_ILLEGAL_POINTER_VALUE 0
 #define CONFIG_NR_CPUS 1

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 2/11] x86/asm: Move PUD_PAGE macros to page_types.h
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

PUD_SHIFT is defined according to a given kernel configuration, which
allows it be commonly used by any x86 kernels.  However, PUD_PAGE_SIZE
and PUD_PAGE_MASK, which are set from PUD_SHIFT, are defined in
page_64_types.h, which can be used by 64-bit kernel only.

Move PUD_PAGE_SIZE and PUD_PAGE_MASK to page_types.h so that they can
be used by any x86 kernels as well.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/include/asm/page_64_types.h |    3 ---
 arch/x86/include/asm/page_types.h    |    3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 4edd53b..4928cf0 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -26,9 +26,6 @@
 #define MCE_STACK 4
 #define N_EXCEPTION_STACKS 4  /* hw limit: 7 */
 
-#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
-#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
-
 /*
  * Set __PAGE_OFFSET to the most negative possible address +
  * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index c7c712f..c5b7fb2 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -20,6 +20,9 @@
 #define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
 #define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
 
+#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
+#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
+
 #define HPAGE_SHIFT		PMD_SHIFT
 #define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 2/11] x86/asm: Move PUD_PAGE macros to page_types.h
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

PUD_SHIFT is defined according to a given kernel configuration, which
allows it be commonly used by any x86 kernels.  However, PUD_PAGE_SIZE
and PUD_PAGE_MASK, which are set from PUD_SHIFT, are defined in
page_64_types.h, which can be used by 64-bit kernel only.

Move PUD_PAGE_SIZE and PUD_PAGE_MASK to page_types.h so that they can
be used by any x86 kernels as well.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/include/asm/page_64_types.h |    3 ---
 arch/x86/include/asm/page_types.h    |    3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 4edd53b..4928cf0 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -26,9 +26,6 @@
 #define MCE_STACK 4
 #define N_EXCEPTION_STACKS 4  /* hw limit: 7 */
 
-#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
-#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
-
 /*
  * Set __PAGE_OFFSET to the most negative possible address +
  * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index c7c712f..c5b7fb2 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -20,6 +20,9 @@
 #define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
 #define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
 
+#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
+#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
+
 #define HPAGE_SHIFT		PMD_SHIFT
 #define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/asm: Move PUD_PAGE macros to page_types.h
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:42   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:42 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: tglx, hpa, elliott, linux-kernel, bp, konrad.wilk, mingo,
	toshi.kani, jgross, mingo, akpm

Commit-ID:  832102671855f73962e7a04fdafd48b9385ea5c6
Gitweb:     http://git.kernel.org/tip/832102671855f73962e7a04fdafd48b9385ea5c6
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:15 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:32 +0200

x86/asm: Move PUD_PAGE macros to page_types.h

PUD_SHIFT is defined according to a given kernel configuration, which
allows it be commonly used by any x86 kernels.  However, PUD_PAGE_SIZE
and PUD_PAGE_MASK, which are set from PUD_SHIFT, are defined in
page_64_types.h, which can be used by 64-bit kernel only.

Move PUD_PAGE_SIZE and PUD_PAGE_MASK to page_types.h so that they can
be used by any x86 kernels as well.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-3-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/page_64_types.h | 3 ---
 arch/x86/include/asm/page_types.h    | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 4edd53b..4928cf0 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -26,9 +26,6 @@
 #define MCE_STACK 4
 #define N_EXCEPTION_STACKS 4  /* hw limit: 7 */
 
-#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
-#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
-
 /*
  * Set __PAGE_OFFSET to the most negative possible address +
  * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index c7c712f..c5b7fb2 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -20,6 +20,9 @@
 #define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
 #define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
 
+#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
+#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
+
 #define HPAGE_SHIFT		PMD_SHIFT
 #define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 3/11] x86/asm: Add pud/pmd mask interfaces to handle large PAT bit
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

The PAT bit gets relocated to bit 12 when PUD and PMD mappings are
used.  This bit 12, however, is not covered by PTE_FLAGS_MASK, which
is used for masking pfn and flags for all levels.

Add pud/pmd mask interfaces to handle pfn and flags properly by using
P?D_PAGE_MASK when PUD/PMD mappings are used, i.e. PSE bit is set.

Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/include/asm/pgtable_types.h |   36 ++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 13f310b..7c8f797 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -209,10 +209,10 @@ enum page_cache_mode {
 
 #include <linux/types.h>
 
-/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+/* Extracts the PFN from a (pte|pmd|pud|pgd)val_t of a 4KB page */
 #define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
 
-/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+/* Extracts the flags from a (pte|pmd|pud|pgd)val_t of a 4KB page */
 #define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
 
 typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
@@ -276,11 +276,43 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 }
 #endif
 
+static inline pudval_t pud_pfn_mask(pud_t pud)
+{
+	if (native_pud_val(pud) & _PAGE_PSE)
+		return PUD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+	else
+		return PTE_PFN_MASK;
+}
+
+static inline pudval_t pud_flags_mask(pud_t pud)
+{
+	if (native_pud_val(pud) & _PAGE_PSE)
+		return ~(PUD_PAGE_MASK & (pudval_t)PHYSICAL_PAGE_MASK);
+	else
+		return ~PTE_PFN_MASK;
+}
+
 static inline pudval_t pud_flags(pud_t pud)
 {
 	return native_pud_val(pud) & PTE_FLAGS_MASK;
 }
 
+static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
+{
+	if (native_pmd_val(pmd) & _PAGE_PSE)
+		return PMD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+	else
+		return PTE_PFN_MASK;
+}
+
+static inline pmdval_t pmd_flags_mask(pmd_t pmd)
+{
+	if (native_pmd_val(pmd) & _PAGE_PSE)
+		return ~(PMD_PAGE_MASK & (pmdval_t)PHYSICAL_PAGE_MASK);
+	else
+		return ~PTE_PFN_MASK;
+}
+
 static inline pmdval_t pmd_flags(pmd_t pmd)
 {
 	return native_pmd_val(pmd) & PTE_FLAGS_MASK;

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 3/11] x86/asm: Add pud/pmd mask interfaces to handle large PAT bit
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

The PAT bit gets relocated to bit 12 when PUD and PMD mappings are
used.  This bit 12, however, is not covered by PTE_FLAGS_MASK, which
is used for masking pfn and flags for all levels.

Add pud/pmd mask interfaces to handle pfn and flags properly by using
P?D_PAGE_MASK when PUD/PMD mappings are used, i.e. PSE bit is set.

Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/include/asm/pgtable_types.h |   36 ++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 13f310b..7c8f797 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -209,10 +209,10 @@ enum page_cache_mode {
 
 #include <linux/types.h>
 
-/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+/* Extracts the PFN from a (pte|pmd|pud|pgd)val_t of a 4KB page */
 #define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
 
-/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+/* Extracts the flags from a (pte|pmd|pud|pgd)val_t of a 4KB page */
 #define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
 
 typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
@@ -276,11 +276,43 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 }
 #endif
 
+static inline pudval_t pud_pfn_mask(pud_t pud)
+{
+	if (native_pud_val(pud) & _PAGE_PSE)
+		return PUD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+	else
+		return PTE_PFN_MASK;
+}
+
+static inline pudval_t pud_flags_mask(pud_t pud)
+{
+	if (native_pud_val(pud) & _PAGE_PSE)
+		return ~(PUD_PAGE_MASK & (pudval_t)PHYSICAL_PAGE_MASK);
+	else
+		return ~PTE_PFN_MASK;
+}
+
 static inline pudval_t pud_flags(pud_t pud)
 {
 	return native_pud_val(pud) & PTE_FLAGS_MASK;
 }
 
+static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
+{
+	if (native_pmd_val(pmd) & _PAGE_PSE)
+		return PMD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+	else
+		return PTE_PFN_MASK;
+}
+
+static inline pmdval_t pmd_flags_mask(pmd_t pmd)
+{
+	if (native_pmd_val(pmd) & _PAGE_PSE)
+		return ~(PMD_PAGE_MASK & (pmdval_t)PHYSICAL_PAGE_MASK);
+	else
+		return ~PTE_PFN_MASK;
+}
+
 static inline pmdval_t pmd_flags(pmd_t pmd)
 {
 	return native_pmd_val(pmd) & PTE_FLAGS_MASK;

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/asm: Add pud/ pmd mask interfaces to handle large PAT bit
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:43   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:43 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: mingo, jgross, hpa, bp, elliott, toshi.kani, konrad.wilk,
	linux-kernel, mingo, akpm, tglx

Commit-ID:  4be4c1fb9a754b100466ebaec50f825be0b2050b
Gitweb:     http://git.kernel.org/tip/4be4c1fb9a754b100466ebaec50f825be0b2050b
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:16 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:32 +0200

x86/asm: Add pud/pmd mask interfaces to handle large PAT bit

The PAT bit gets relocated to bit 12 when PUD and PMD mappings are
used.  This bit 12, however, is not covered by PTE_FLAGS_MASK, which
is used for masking pfn and flags for all levels.

Add pud/pmd mask interfaces to handle pfn and flags properly by using
P?D_PAGE_MASK when PUD/PMD mappings are used, i.e. PSE bit is set.

Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-4-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/pgtable_types.h | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 13f310b..7c8f797 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -209,10 +209,10 @@ enum page_cache_mode {
 
 #include <linux/types.h>
 
-/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+/* Extracts the PFN from a (pte|pmd|pud|pgd)val_t of a 4KB page */
 #define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
 
-/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+/* Extracts the flags from a (pte|pmd|pud|pgd)val_t of a 4KB page */
 #define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
 
 typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
@@ -276,11 +276,43 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 }
 #endif
 
+static inline pudval_t pud_pfn_mask(pud_t pud)
+{
+	if (native_pud_val(pud) & _PAGE_PSE)
+		return PUD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+	else
+		return PTE_PFN_MASK;
+}
+
+static inline pudval_t pud_flags_mask(pud_t pud)
+{
+	if (native_pud_val(pud) & _PAGE_PSE)
+		return ~(PUD_PAGE_MASK & (pudval_t)PHYSICAL_PAGE_MASK);
+	else
+		return ~PTE_PFN_MASK;
+}
+
 static inline pudval_t pud_flags(pud_t pud)
 {
 	return native_pud_val(pud) & PTE_FLAGS_MASK;
 }
 
+static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
+{
+	if (native_pmd_val(pmd) & _PAGE_PSE)
+		return PMD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+	else
+		return PTE_PFN_MASK;
+}
+
+static inline pmdval_t pmd_flags_mask(pmd_t pmd)
+{
+	if (native_pmd_val(pmd) & _PAGE_PSE)
+		return ~(PMD_PAGE_MASK & (pmdval_t)PHYSICAL_PAGE_MASK);
+	else
+		return ~PTE_PFN_MASK;
+}
+
 static inline pmdval_t pmd_flags(pmd_t pmd)
 {
 	return native_pmd_val(pmd) & PTE_FLAGS_MASK;

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

Now that we have pud/pmd mask interfaces, which handle pfn & flags
mask properly for the large PAT bit.

Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
PTE_FLAGS_MASK with the pud/pmd mask interfaces.

Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/include/asm/pgtable.h       |   14 ++++++++------
 arch/x86/include/asm/pgtable_types.h |    4 ++--
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 8338c81..714ad06 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -139,12 +139,12 @@ static inline unsigned long pte_pfn(pte_t pte)
 
 static inline unsigned long pmd_pfn(pmd_t pmd)
 {
-	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+	return (pmd_val(pmd) & pmd_pfn_mask(pmd)) >> PAGE_SHIFT;
 }
 
 static inline unsigned long pud_pfn(pud_t pud)
 {
-	return (pud_val(pud) & PTE_PFN_MASK) >> PAGE_SHIFT;
+	return (pud_val(pud) & pud_pfn_mask(pud)) >> PAGE_SHIFT;
 }
 
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
@@ -499,14 +499,15 @@ static inline int pmd_none(pmd_t pmd)
 
 static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 {
-	return (unsigned long)__va(pmd_val(pmd) & PTE_PFN_MASK);
+	return (unsigned long)__va(pmd_val(pmd) & pmd_pfn_mask(pmd));
 }
 
 /*
  * Currently stuck as a macro due to indirect forward reference to
  * linux/mmzone.h's __section_mem_map_addr() definition:
  */
-#define pmd_page(pmd)	pfn_to_page((pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT)
+#define pmd_page(pmd)		\
+	pfn_to_page((pmd_val(pmd) & pmd_pfn_mask(pmd)) >> PAGE_SHIFT)
 
 /*
  * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
@@ -567,14 +568,15 @@ static inline int pud_present(pud_t pud)
 
 static inline unsigned long pud_page_vaddr(pud_t pud)
 {
-	return (unsigned long)__va((unsigned long)pud_val(pud) & PTE_PFN_MASK);
+	return (unsigned long)__va(pud_val(pud) & pud_pfn_mask(pud));
 }
 
 /*
  * Currently stuck as a macro due to indirect forward reference to
  * linux/mmzone.h's __section_mem_map_addr() definition:
  */
-#define pud_page(pud)		pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
+#define pud_page(pud)		\
+	pfn_to_page((pud_val(pud) & pud_pfn_mask(pud)) >> PAGE_SHIFT)
 
 /* Find an entry in the second-level page table.. */
 static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 7c8f797..dd5b0aa 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -294,7 +294,7 @@ static inline pudval_t pud_flags_mask(pud_t pud)
 
 static inline pudval_t pud_flags(pud_t pud)
 {
-	return native_pud_val(pud) & PTE_FLAGS_MASK;
+	return native_pud_val(pud) & pud_flags_mask(pud);
 }
 
 static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
@@ -315,7 +315,7 @@ static inline pmdval_t pmd_flags_mask(pmd_t pmd)
 
 static inline pmdval_t pmd_flags(pmd_t pmd)
 {
-	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+	return native_pmd_val(pmd) & pmd_flags_mask(pmd);
 }
 
 static inline pte_t native_make_pte(pteval_t val)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

Now that we have pud/pmd mask interfaces, which handle pfn & flags
mask properly for the large PAT bit.

Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
PTE_FLAGS_MASK with the pud/pmd mask interfaces.

Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/include/asm/pgtable.h       |   14 ++++++++------
 arch/x86/include/asm/pgtable_types.h |    4 ++--
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 8338c81..714ad06 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -139,12 +139,12 @@ static inline unsigned long pte_pfn(pte_t pte)
 
 static inline unsigned long pmd_pfn(pmd_t pmd)
 {
-	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+	return (pmd_val(pmd) & pmd_pfn_mask(pmd)) >> PAGE_SHIFT;
 }
 
 static inline unsigned long pud_pfn(pud_t pud)
 {
-	return (pud_val(pud) & PTE_PFN_MASK) >> PAGE_SHIFT;
+	return (pud_val(pud) & pud_pfn_mask(pud)) >> PAGE_SHIFT;
 }
 
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
@@ -499,14 +499,15 @@ static inline int pmd_none(pmd_t pmd)
 
 static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 {
-	return (unsigned long)__va(pmd_val(pmd) & PTE_PFN_MASK);
+	return (unsigned long)__va(pmd_val(pmd) & pmd_pfn_mask(pmd));
 }
 
 /*
  * Currently stuck as a macro due to indirect forward reference to
  * linux/mmzone.h's __section_mem_map_addr() definition:
  */
-#define pmd_page(pmd)	pfn_to_page((pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT)
+#define pmd_page(pmd)		\
+	pfn_to_page((pmd_val(pmd) & pmd_pfn_mask(pmd)) >> PAGE_SHIFT)
 
 /*
  * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
@@ -567,14 +568,15 @@ static inline int pud_present(pud_t pud)
 
 static inline unsigned long pud_page_vaddr(pud_t pud)
 {
-	return (unsigned long)__va((unsigned long)pud_val(pud) & PTE_PFN_MASK);
+	return (unsigned long)__va(pud_val(pud) & pud_pfn_mask(pud));
 }
 
 /*
  * Currently stuck as a macro due to indirect forward reference to
  * linux/mmzone.h's __section_mem_map_addr() definition:
  */
-#define pud_page(pud)		pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
+#define pud_page(pud)		\
+	pfn_to_page((pud_val(pud) & pud_pfn_mask(pud)) >> PAGE_SHIFT)
 
 /* Find an entry in the second-level page table.. */
 static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 7c8f797..dd5b0aa 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -294,7 +294,7 @@ static inline pudval_t pud_flags_mask(pud_t pud)
 
 static inline pudval_t pud_flags(pud_t pud)
 {
-	return native_pud_val(pud) & PTE_FLAGS_MASK;
+	return native_pud_val(pud) & pud_flags_mask(pud);
 }
 
 static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
@@ -315,7 +315,7 @@ static inline pmdval_t pmd_flags_mask(pmd_t pmd)
 
 static inline pmdval_t pmd_flags(pmd_t pmd)
 {
-	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+	return native_pmd_val(pmd) & pmd_flags_mask(pmd);
 }
 
 static inline pte_t native_make_pte(pteval_t val)

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/asm: Fix pud/ pmd interfaces to handle large PAT bit
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:43   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:43 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: mingo, tglx, mingo, akpm, bp, toshi.kani, jgross, elliott,
	linux-kernel, konrad.wilk, hpa

Commit-ID:  f70abb0fc3da1b2945c92751ccda2744081bf2b7
Gitweb:     http://git.kernel.org/tip/f70abb0fc3da1b2945c92751ccda2744081bf2b7
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:17 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:32 +0200

x86/asm: Fix pud/pmd interfaces to handle large PAT bit

Now that we have pud/pmd mask interfaces, which handle pfn & flags
mask properly for the large PAT bit.

Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
PTE_FLAGS_MASK with the pud/pmd mask interfaces.

Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-5-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/pgtable.h       | 14 ++++++++------
 arch/x86/include/asm/pgtable_types.h |  4 ++--
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 867da5b..0733ec7 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -142,12 +142,12 @@ static inline unsigned long pte_pfn(pte_t pte)
 
 static inline unsigned long pmd_pfn(pmd_t pmd)
 {
-	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+	return (pmd_val(pmd) & pmd_pfn_mask(pmd)) >> PAGE_SHIFT;
 }
 
 static inline unsigned long pud_pfn(pud_t pud)
 {
-	return (pud_val(pud) & PTE_PFN_MASK) >> PAGE_SHIFT;
+	return (pud_val(pud) & pud_pfn_mask(pud)) >> PAGE_SHIFT;
 }
 
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
@@ -502,14 +502,15 @@ static inline int pmd_none(pmd_t pmd)
 
 static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 {
-	return (unsigned long)__va(pmd_val(pmd) & PTE_PFN_MASK);
+	return (unsigned long)__va(pmd_val(pmd) & pmd_pfn_mask(pmd));
 }
 
 /*
  * Currently stuck as a macro due to indirect forward reference to
  * linux/mmzone.h's __section_mem_map_addr() definition:
  */
-#define pmd_page(pmd)	pfn_to_page((pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT)
+#define pmd_page(pmd)		\
+	pfn_to_page((pmd_val(pmd) & pmd_pfn_mask(pmd)) >> PAGE_SHIFT)
 
 /*
  * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
@@ -570,14 +571,15 @@ static inline int pud_present(pud_t pud)
 
 static inline unsigned long pud_page_vaddr(pud_t pud)
 {
-	return (unsigned long)__va((unsigned long)pud_val(pud) & PTE_PFN_MASK);
+	return (unsigned long)__va(pud_val(pud) & pud_pfn_mask(pud));
 }
 
 /*
  * Currently stuck as a macro due to indirect forward reference to
  * linux/mmzone.h's __section_mem_map_addr() definition:
  */
-#define pud_page(pud)		pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
+#define pud_page(pud)		\
+	pfn_to_page((pud_val(pud) & pud_pfn_mask(pud)) >> PAGE_SHIFT)
 
 /* Find an entry in the second-level page table.. */
 static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 7c8f797..dd5b0aa 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -294,7 +294,7 @@ static inline pudval_t pud_flags_mask(pud_t pud)
 
 static inline pudval_t pud_flags(pud_t pud)
 {
-	return native_pud_val(pud) & PTE_FLAGS_MASK;
+	return native_pud_val(pud) & pud_flags_mask(pud);
 }
 
 static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
@@ -315,7 +315,7 @@ static inline pmdval_t pmd_flags_mask(pmd_t pmd)
 
 static inline pmdval_t pmd_flags(pmd_t pmd)
 {
-	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+	return native_pmd_val(pmd) & pmd_flags_mask(pmd);
 }
 
 static inline pte_t native_make_pte(pteval_t val)

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-09-17 18:24   ` Toshi Kani
  (?)
  (?)
@ 2015-11-09 18:06   ` Boris Ostrovsky
  2015-11-09 19:16       ` Toshi Kani
  -1 siblings, 1 reply; 52+ messages in thread
From: Boris Ostrovsky @ 2015-11-09 18:06 UTC (permalink / raw)
  To: Toshi Kani, hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott

[-- Attachment #1: Type: text/plain, Size: 4188 bytes --]

On 09/17/2015 02:24 PM, Toshi Kani wrote:
> Now that we have pud/pmd mask interfaces, which handle pfn & flags
> mask properly for the large PAT bit.
>
> Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> PTE_FLAGS_MASK with the pud/pmd mask interfaces.
>
> Suggested-by: Juergen Gross <jgross@suse.com>
> Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> Cc: Juergen Gross <jgross@suse.com>
> Cc: Konrad Wilk <konrad.wilk@oracle.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: H. Peter Anvin <hpa@zytor.com>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Borislav Petkov <bp@alien8.de>
> ---
>   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
>   arch/x86/include/asm/pgtable_types.h |    4 ++--
>   2 files changed, 10 insertions(+), 8 deletions(-)
>


Looks like this commit is causing this splat for 32-bit kernels. I am 
attaching my config file, just in case.

-boris


[    8.905943] page:eea45000 count:0 mapcount:-128 mapping:  (null) index:0x0
[    8.913041] flags: 0x40000000()
[    8.916293] page dumped because: VM_BUG_ON_PAGE(page_mapcount(page) < 0)
[    8.923204] ------------[ cut here ]------------
[    8.927958] kernel BUG at /home/build/linux-boris/mm/huge_memory.c:1485!
[    8.934860] invalid opcode: 0000 [#1] SMP
[    8.939094] Modules linked in: ahci libahci ata_generic skge r8169 firewire_ohci mii libata qla2xxx(+) scsi_transport_fc scsi_mod radeon tpm_infineon ttm backlight wmi acpi_cpufreq tpm_tis
[    8.956548] CPU: 2 PID: 1758 Comm: modprobe Not tainted 4.3.0upstream-09269-gce5c2d2 #1
[    8.964792] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080014  07/18/2008
[    8.975991] task: ed84e600 ti: f6458000 task.ti: f6458000
[    8.981552] EIP: 0060:[<c11bde80>] EFLAGS: 00010246 CPU: 2
[    8.987203] EIP is at zap_huge_pmd+0x240/0x260
[    8.991778] EAX: 00000000 EBX: f6459eb0 ECX: 00000292 EDX: 00000292
[    8.998234] ESI: f6634d98 EDI: eea45000 EBP: f6459dc8 ESP: f6459d98
[    8.998355] ata1: SATA link down (SStatus 0 SControl 300)
[    9.000330] ata2: SATA link down (SStatus 0 SControl 300)
[    9.015804]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[    9.021364] CR0: 8005003b CR2: b75b21a0 CR3: 3655b880 CR4: 000006f0
[    9.027818] Stack:
[    9.029885]  00000080 00000000 80000002 ee795000 80000002 ffe00000 00000000 ffffff7f
[    9.037930]  eee6169c f70c5e40 b6600000 f6634d98 f6459e78 c119a7c8 b6600000 80000002
[    9.045972]  00000003 c18992f4 c18992f0 00000003 00000286 f6459e0c c10db5f0 00000000
[    9.054018] Call Trace:
[    9.056537]  [<c119a7c8>] unmap_single_vma+0x6e8/0x7c0
[    9.061829]  [<c10db5f0>] ? __wake_up+0x40/0x50
[    9.063587] firewire_core 0000:08:05.0: created device fw0: GUID 000000001a1a2f03, S800
[    9.074736]  [<c119a8e7>] unmap_vmas+0x47/0x80
[    9.079312]  [<c11a0c44>] unmap_region+0x74/0xc0
[    9.084067]  [<c11a2d50>] do_munmap+0x1b0/0x280
[    9.088732]  [<c11a2e58>] vm_munmap+0x38/0x50
[    9.093218]  [<c11a2e88>] SyS_munmap+0x18/0x20
[    9.097795]  [<c1003861>] do_fast_syscall_32+0xa1/0x270
[    9.103176]  [<c1095400>] ? __do_page_fault+0x430/0x430
[    9.108559]  [<c169de51>] sysenter_past_esp+0x36/0x55
[    9.113761] Code: 00 e9 05 fe ff ff 90 8d 74 26 00 0f 0b eb fe ba 4c e1 7a c1 89 f8 e8 f0 91 fd ff 0f 0b eb fe ba 6c e1 7a c1 89 f8 e8 e0 91 fd ff <0f> 0b eb fe ba c4 e1 7a c1 89 f8 e8 d0 91 fd ff 0f 0b eb fe 8d
[    9.133727] EIP: [<c11bde80>] zap_huge_pmd+0x240/0x260 SS:ESP 0068:f6459d98
[    9.140929] ---[ end trace cba8fb1fc2e2e78a ]---
[    9.143363] scsi host5: qla2xxx
[    9.148416] qla2xxx [0000:04:07.1]-00fb:5: QLogic QLE2362 - PCI-Express to 2Gb FC, Dual Channel.
[    9.148420] qla2xxx [0000:04:07.1]-00fc:5: ISP2322: PCI-X (133 MHz) @ 0000:04:07.1 hdma+ host#=5 fw=3.03.28 IPX.
[    9.152282] ata4: softreset failed (device not ready)
[    9.152284] ata4: applying PMP SRST workaround and retrying
[    9.153282] ata3: softreset failed (device not ready)
[    9.153284] ata3: applying PMP SRST workaround and retrying
[    9.190361] Kernel panic - not syncing: Fatal exception
[    9.195764] Kernel Offset: disabled
[    9.199354] ---[ end Kernel panic - not syncing: Fatal exception



[-- Attachment #2: 32b.config --]
[-- Type: text/plain, Size: 99759 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.3.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="upstream"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
# CONFIG_ZSWAP is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_EINJ=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_REDIRECT is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_NF_DUP_IPV4 is not set
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_RAW is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP6_NF_RAW is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=y
# CONFIG_ZRAM_LZ4_COMPRESS is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLK_DEV_NVME is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_KERNEL_API is not set
# CONFIG_CXL_EEH is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_XEN_SCSI_FRONTEND=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_SNIC is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_NSP32=m
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=m
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_FIREWIRE_NET is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#
CONFIG_VHOST_NET=y
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=y
CONFIG_VHOST=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_ATL1C=m
# CONFIG_ALX is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=y
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
CONFIG_NE2K_PCI=m
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=y
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_MID is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_TPM=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=m
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_CRB is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_RADEON_UMS is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=m
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=m
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=m
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ACPI=y
# CONFIG_IDMA64 is not set
# CONFIG_PCH_DMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SELFBALLOONING=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=y
CONFIG_XEN_SCSI_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_COMEDI is not set
# CONFIG_RTS5208 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_FIREWIRE_SERIAL is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_MOST is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=m
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_CHROME_PLATFORMS is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_INTEL_IOMMU is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_AMD_MCE_INJ is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_STM_DUMMY is not set
# CONFIG_STM_SOURCE_CONSOLE is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_EFIVAR_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=4000
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_UPROBE_EVENT is not set
CONFIG_PROBE_EVENTS=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
# CONFIG_KDB_KEYBOARD is not set
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65534
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_AKCIPHER2=y
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
# CONFIG_LGUEST is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-11-09 18:06   ` [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd " Boris Ostrovsky
@ 2015-11-09 19:16       ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-11-09 19:16 UTC (permalink / raw)
  To: Boris Ostrovsky, hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott

On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> On 09/17/2015 02:24 PM, Toshi Kani wrote:
> > Now that we have pud/pmd mask interfaces, which handle pfn & flags
> > mask properly for the large PAT bit.
> > 
> > Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> > PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> > 
> > Suggested-by: Juergen Gross <jgross@suse.com>
> > Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> > Cc: Juergen Gross <jgross@suse.com>
> > Cc: Konrad Wilk <konrad.wilk@oracle.com>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: H. Peter Anvin <hpa@zytor.com>
> > Cc: Ingo Molnar <mingo@redhat.com>
> > Cc: Borislav Petkov <bp@alien8.de>
> > ---
> >   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> >   arch/x86/include/asm/pgtable_types.h |    4 ++--
> >   2 files changed, 10 insertions(+), 8 deletions(-)
> > 
> 
> 
> Looks like this commit is causing this splat for 32-bit kernels. I am 
> attaching my config file, just in case.

Thanks for the report!  I'd like to reproduce the issue since I am not sure how
this change caused it...

I tried to build a kernel with the attached config file, and got the following
error.  Not sure what I am missing.  

----
$ make -j24 ARCH=i386
   :
  LD      drivers/built-in.o
  LINK    vmlinux
./.config: line 44: $'\r': command not found
Makefile:929: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 127
----

Do you have steps to reproduce the issue?  Or do you see it during boot-time?

Thanks,
-Toshi

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-11-09 19:16       ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-11-09 19:16 UTC (permalink / raw)
  To: Boris Ostrovsky, hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott

On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> On 09/17/2015 02:24 PM, Toshi Kani wrote:
> > Now that we have pud/pmd mask interfaces, which handle pfn & flags
> > mask properly for the large PAT bit.
> > 
> > Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> > PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> > 
> > Suggested-by: Juergen Gross <jgross@suse.com>
> > Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> > Cc: Juergen Gross <jgross@suse.com>
> > Cc: Konrad Wilk <konrad.wilk@oracle.com>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: H. Peter Anvin <hpa@zytor.com>
> > Cc: Ingo Molnar <mingo@redhat.com>
> > Cc: Borislav Petkov <bp@alien8.de>
> > ---
> >   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> >   arch/x86/include/asm/pgtable_types.h |    4 ++--
> >   2 files changed, 10 insertions(+), 8 deletions(-)
> > 
> 
> 
> Looks like this commit is causing this splat for 32-bit kernels. I am 
> attaching my config file, just in case.

Thanks for the report!  I'd like to reproduce the issue since I am not sure how
this change caused it...

I tried to build a kernel with the attached config file, and got the following
error.  Not sure what I am missing.  

----
$ make -j24 ARCH=i386
   :
  LD      drivers/built-in.o
  LINK    vmlinux
./.config: line 44: $'\r': command not found
Makefile:929: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 127
----

Do you have steps to reproduce the issue?  Or do you see it during boot-time?

Thanks,
-Toshi


^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-11-09 19:16       ` Toshi Kani
@ 2015-11-09 19:39         ` Boris Ostrovsky
  -1 siblings, 0 replies; 52+ messages in thread
From: Boris Ostrovsky @ 2015-11-09 19:39 UTC (permalink / raw)
  To: Toshi Kani, hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott

On 11/09/2015 02:16 PM, Toshi Kani wrote:
> On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
>> On 09/17/2015 02:24 PM, Toshi Kani wrote:
>>> Now that we have pud/pmd mask interfaces, which handle pfn & flags
>>> mask properly for the large PAT bit.
>>>
>>> Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
>>> PTE_FLAGS_MASK with the pud/pmd mask interfaces.
>>>
>>> Suggested-by: Juergen Gross <jgross@suse.com>
>>> Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
>>> Cc: Juergen Gross <jgross@suse.com>
>>> Cc: Konrad Wilk <konrad.wilk@oracle.com>
>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>> Cc: H. Peter Anvin <hpa@zytor.com>
>>> Cc: Ingo Molnar <mingo@redhat.com>
>>> Cc: Borislav Petkov <bp@alien8.de>
>>> ---
>>>    arch/x86/include/asm/pgtable.h       |   14 ++++++++------
>>>    arch/x86/include/asm/pgtable_types.h |    4 ++--
>>>    2 files changed, 10 insertions(+), 8 deletions(-)
>>>
>>
>> Looks like this commit is causing this splat for 32-bit kernels. I am
>> attaching my config file, just in case.
> Thanks for the report!  I'd like to reproduce the issue since I am not sure how
> this change caused it...
>
> I tried to build a kernel with the attached config file, and got the following
> error.  Not sure what I am missing.
>
> ----
> $ make -j24 ARCH=i386
>     :
>    LD      drivers/built-in.o
>    LINK    vmlinux
> ./.config: line 44: $'\r': command not found

I wonder whether my email client added ^Ms to the file that I send. It 
shouldn't have.

> Makefile:929: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 127
> ----
>
> Do you have steps to reproduce the issue?  Or do you see it during boot-time?

This always happens just after system has booted, it may still be going 
over init scripts. I am booting with ramdisk, don't know whether it has 
anything to do with this problem.

FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it 
alone makes this crash go away.


-boris

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-11-09 19:39         ` Boris Ostrovsky
  0 siblings, 0 replies; 52+ messages in thread
From: Boris Ostrovsky @ 2015-11-09 19:39 UTC (permalink / raw)
  To: Toshi Kani, hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott

On 11/09/2015 02:16 PM, Toshi Kani wrote:
> On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
>> On 09/17/2015 02:24 PM, Toshi Kani wrote:
>>> Now that we have pud/pmd mask interfaces, which handle pfn & flags
>>> mask properly for the large PAT bit.
>>>
>>> Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
>>> PTE_FLAGS_MASK with the pud/pmd mask interfaces.
>>>
>>> Suggested-by: Juergen Gross <jgross@suse.com>
>>> Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
>>> Cc: Juergen Gross <jgross@suse.com>
>>> Cc: Konrad Wilk <konrad.wilk@oracle.com>
>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>> Cc: H. Peter Anvin <hpa@zytor.com>
>>> Cc: Ingo Molnar <mingo@redhat.com>
>>> Cc: Borislav Petkov <bp@alien8.de>
>>> ---
>>>    arch/x86/include/asm/pgtable.h       |   14 ++++++++------
>>>    arch/x86/include/asm/pgtable_types.h |    4 ++--
>>>    2 files changed, 10 insertions(+), 8 deletions(-)
>>>
>>
>> Looks like this commit is causing this splat for 32-bit kernels. I am
>> attaching my config file, just in case.
> Thanks for the report!  I'd like to reproduce the issue since I am not sure how
> this change caused it...
>
> I tried to build a kernel with the attached config file, and got the following
> error.  Not sure what I am missing.
>
> ----
> $ make -j24 ARCH=i386
>     :
>    LD      drivers/built-in.o
>    LINK    vmlinux
> ./.config: line 44: $'\r': command not found

I wonder whether my email client added ^Ms to the file that I send. It 
shouldn't have.

> Makefile:929: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 127
> ----
>
> Do you have steps to reproduce the issue?  Or do you see it during boot-time?

This always happens just after system has booted, it may still be going 
over init scripts. I am booting with ramdisk, don't know whether it has 
anything to do with this problem.

FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it 
alone makes this crash go away.


-boris

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-11-09 19:39         ` Boris Ostrovsky
@ 2015-11-09 20:47           ` Kirill A. Shutemov
  -1 siblings, 0 replies; 52+ messages in thread
From: Kirill A. Shutemov @ 2015-11-09 20:47 UTC (permalink / raw)
  To: Boris Ostrovsky
  Cc: Toshi Kani, hpa, tglx, mingo, akpm, bp, linux-mm, linux-kernel,
	x86, jgross, konrad.wilk, elliott

On Mon, Nov 09, 2015 at 02:39:31PM -0500, Boris Ostrovsky wrote:
> On 11/09/2015 02:16 PM, Toshi Kani wrote:
> >On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> >>On 09/17/2015 02:24 PM, Toshi Kani wrote:
> >>>Now that we have pud/pmd mask interfaces, which handle pfn & flags
> >>>mask properly for the large PAT bit.
> >>>
> >>>Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> >>>PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> >>>
> >>>Suggested-by: Juergen Gross <jgross@suse.com>
> >>>Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> >>>Cc: Juergen Gross <jgross@suse.com>
> >>>Cc: Konrad Wilk <konrad.wilk@oracle.com>
> >>>Cc: Thomas Gleixner <tglx@linutronix.de>
> >>>Cc: H. Peter Anvin <hpa@zytor.com>
> >>>Cc: Ingo Molnar <mingo@redhat.com>
> >>>Cc: Borislav Petkov <bp@alien8.de>
> >>>---
> >>>   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> >>>   arch/x86/include/asm/pgtable_types.h |    4 ++--
> >>>   2 files changed, 10 insertions(+), 8 deletions(-)
> >>>
> >>
> >>Looks like this commit is causing this splat for 32-bit kernels. I am
> >>attaching my config file, just in case.
> >Thanks for the report!  I'd like to reproduce the issue since I am not sure how
> >this change caused it...
> >
> >I tried to build a kernel with the attached config file, and got the following
> >error.  Not sure what I am missing.
> >
> >----
> >$ make -j24 ARCH=i386
> >    :
> >   LD      drivers/built-in.o
> >   LINK    vmlinux
> >./.config: line 44: $'\r': command not found
> 
> I wonder whether my email client added ^Ms to the file that I send. It
> shouldn't have.
> 
> >Makefile:929: recipe for target 'vmlinux' failed
> >make: *** [vmlinux] Error 127
> >----
> >
> >Do you have steps to reproduce the issue?  Or do you see it during boot-time?
> 
> This always happens just after system has booted, it may still be going over
> init scripts. I am booting with ramdisk, don't know whether it has anything
> to do with this problem.
> 
> FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it
> alone makes this crash go away.

Could you check the patch below?

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index dd5b0aa9dd2f..c1e797266ce9 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -279,17 +279,14 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 static inline pudval_t pud_pfn_mask(pud_t pud)
 {
 	if (native_pud_val(pud) & _PAGE_PSE)
-		return PUD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+		return ~((1ULL << PUD_SHIFT) - 1) & PHYSICAL_PAGE_MASK;
 	else
 		return PTE_PFN_MASK;
 }
 
 static inline pudval_t pud_flags_mask(pud_t pud)
 {
-	if (native_pud_val(pud) & _PAGE_PSE)
-		return ~(PUD_PAGE_MASK & (pudval_t)PHYSICAL_PAGE_MASK);
-	else
-		return ~PTE_PFN_MASK;
+	return ~pud_pfn_mask(pud);
 }
 
 static inline pudval_t pud_flags(pud_t pud)
@@ -300,17 +297,14 @@ static inline pudval_t pud_flags(pud_t pud)
 static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
 {
 	if (native_pmd_val(pmd) & _PAGE_PSE)
-		return PMD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+		return ~((1ULL << PMD_SHIFT) - 1) & PHYSICAL_PAGE_MASK;
 	else
 		return PTE_PFN_MASK;
 }
 
 static inline pmdval_t pmd_flags_mask(pmd_t pmd)
 {
-	if (native_pmd_val(pmd) & _PAGE_PSE)
-		return ~(PMD_PAGE_MASK & (pmdval_t)PHYSICAL_PAGE_MASK);
-	else
-		return ~PTE_PFN_MASK;
+	return ~pmd_pfn_mask(pmd);
 }
 
 static inline pmdval_t pmd_flags(pmd_t pmd)
-- 
 Kirill A. Shutemov

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-11-09 20:47           ` Kirill A. Shutemov
  0 siblings, 0 replies; 52+ messages in thread
From: Kirill A. Shutemov @ 2015-11-09 20:47 UTC (permalink / raw)
  To: Boris Ostrovsky
  Cc: Toshi Kani, hpa, tglx, mingo, akpm, bp, linux-mm, linux-kernel,
	x86, jgross, konrad.wilk, elliott

On Mon, Nov 09, 2015 at 02:39:31PM -0500, Boris Ostrovsky wrote:
> On 11/09/2015 02:16 PM, Toshi Kani wrote:
> >On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> >>On 09/17/2015 02:24 PM, Toshi Kani wrote:
> >>>Now that we have pud/pmd mask interfaces, which handle pfn & flags
> >>>mask properly for the large PAT bit.
> >>>
> >>>Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> >>>PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> >>>
> >>>Suggested-by: Juergen Gross <jgross@suse.com>
> >>>Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> >>>Cc: Juergen Gross <jgross@suse.com>
> >>>Cc: Konrad Wilk <konrad.wilk@oracle.com>
> >>>Cc: Thomas Gleixner <tglx@linutronix.de>
> >>>Cc: H. Peter Anvin <hpa@zytor.com>
> >>>Cc: Ingo Molnar <mingo@redhat.com>
> >>>Cc: Borislav Petkov <bp@alien8.de>
> >>>---
> >>>   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> >>>   arch/x86/include/asm/pgtable_types.h |    4 ++--
> >>>   2 files changed, 10 insertions(+), 8 deletions(-)
> >>>
> >>
> >>Looks like this commit is causing this splat for 32-bit kernels. I am
> >>attaching my config file, just in case.
> >Thanks for the report!  I'd like to reproduce the issue since I am not sure how
> >this change caused it...
> >
> >I tried to build a kernel with the attached config file, and got the following
> >error.  Not sure what I am missing.
> >
> >----
> >$ make -j24 ARCH=i386
> >    :
> >   LD      drivers/built-in.o
> >   LINK    vmlinux
> >./.config: line 44: $'\r': command not found
> 
> I wonder whether my email client added ^Ms to the file that I send. It
> shouldn't have.
> 
> >Makefile:929: recipe for target 'vmlinux' failed
> >make: *** [vmlinux] Error 127
> >----
> >
> >Do you have steps to reproduce the issue?  Or do you see it during boot-time?
> 
> This always happens just after system has booted, it may still be going over
> init scripts. I am booting with ramdisk, don't know whether it has anything
> to do with this problem.
> 
> FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it
> alone makes this crash go away.

Could you check the patch below?

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index dd5b0aa9dd2f..c1e797266ce9 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -279,17 +279,14 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 static inline pudval_t pud_pfn_mask(pud_t pud)
 {
 	if (native_pud_val(pud) & _PAGE_PSE)
-		return PUD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+		return ~((1ULL << PUD_SHIFT) - 1) & PHYSICAL_PAGE_MASK;
 	else
 		return PTE_PFN_MASK;
 }
 
 static inline pudval_t pud_flags_mask(pud_t pud)
 {
-	if (native_pud_val(pud) & _PAGE_PSE)
-		return ~(PUD_PAGE_MASK & (pudval_t)PHYSICAL_PAGE_MASK);
-	else
-		return ~PTE_PFN_MASK;
+	return ~pud_pfn_mask(pud);
 }
 
 static inline pudval_t pud_flags(pud_t pud)
@@ -300,17 +297,14 @@ static inline pudval_t pud_flags(pud_t pud)
 static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
 {
 	if (native_pmd_val(pmd) & _PAGE_PSE)
-		return PMD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+		return ~((1ULL << PMD_SHIFT) - 1) & PHYSICAL_PAGE_MASK;
 	else
 		return PTE_PFN_MASK;
 }
 
 static inline pmdval_t pmd_flags_mask(pmd_t pmd)
 {
-	if (native_pmd_val(pmd) & _PAGE_PSE)
-		return ~(PMD_PAGE_MASK & (pmdval_t)PHYSICAL_PAGE_MASK);
-	else
-		return ~PTE_PFN_MASK;
+	return ~pmd_pfn_mask(pmd);
 }
 
 static inline pmdval_t pmd_flags(pmd_t pmd)
-- 
 Kirill A. Shutemov

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-11-09 20:47           ` Kirill A. Shutemov
@ 2015-11-09 22:36             ` Boris Ostrovsky
  -1 siblings, 0 replies; 52+ messages in thread
From: Boris Ostrovsky @ 2015-11-09 22:36 UTC (permalink / raw)
  To: Kirill A. Shutemov
  Cc: Toshi Kani, hpa, tglx, mingo, akpm, bp, linux-mm, linux-kernel,
	x86, jgross, konrad.wilk, elliott

On 11/09/2015 03:47 PM, Kirill A. Shutemov wrote:
> On Mon, Nov 09, 2015 at 02:39:31PM -0500, Boris Ostrovsky wrote:
>> On 11/09/2015 02:16 PM, Toshi Kani wrote:
>>> On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
>>>> On 09/17/2015 02:24 PM, Toshi Kani wrote:
>>>>> Now that we have pud/pmd mask interfaces, which handle pfn & flags
>>>>> mask properly for the large PAT bit.
>>>>>
>>>>> Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
>>>>> PTE_FLAGS_MASK with the pud/pmd mask interfaces.
>>>>>
>>>>> Suggested-by: Juergen Gross <jgross@suse.com>
>>>>> Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
>>>>> Cc: Juergen Gross <jgross@suse.com>
>>>>> Cc: Konrad Wilk <konrad.wilk@oracle.com>
>>>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>>>> Cc: H. Peter Anvin <hpa@zytor.com>
>>>>> Cc: Ingo Molnar <mingo@redhat.com>
>>>>> Cc: Borislav Petkov <bp@alien8.de>
>>>>> ---
>>>>>    arch/x86/include/asm/pgtable.h       |   14 ++++++++------
>>>>>    arch/x86/include/asm/pgtable_types.h |    4 ++--
>>>>>    2 files changed, 10 insertions(+), 8 deletions(-)
>>>>>
>>>> Looks like this commit is causing this splat for 32-bit kernels. I am
>>>> attaching my config file, just in case.
>>> Thanks for the report!  I'd like to reproduce the issue since I am not sure how
>>> this change caused it...
>>>
>>> I tried to build a kernel with the attached config file, and got the following
>>> error.  Not sure what I am missing.
>>>
>>> ----
>>> $ make -j24 ARCH=i386
>>>     :
>>>    LD      drivers/built-in.o
>>>    LINK    vmlinux
>>> ./.config: line 44: $'\r': command not found
>> I wonder whether my email client added ^Ms to the file that I send. It
>> shouldn't have.
>>
>>> Makefile:929: recipe for target 'vmlinux' failed
>>> make: *** [vmlinux] Error 127
>>> ----
>>>
>>> Do you have steps to reproduce the issue?  Or do you see it during boot-time?
>> This always happens just after system has booted, it may still be going over
>> init scripts. I am booting with ramdisk, don't know whether it has anything
>> to do with this problem.
>>
>> FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it
>> alone makes this crash go away.
> Could you check the patch below?


I does fix the problem on baremetal, thanks. My 32-bit Xen guests still 
fail which I thought was the same issue but now that I looked at it more 
carefully it has different signature.

-boris


>
> diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
> index dd5b0aa9dd2f..c1e797266ce9 100644
> --- a/arch/x86/include/asm/pgtable_types.h
> +++ b/arch/x86/include/asm/pgtable_types.h
> @@ -279,17 +279,14 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
>   static inline pudval_t pud_pfn_mask(pud_t pud)
>   {
>   	if (native_pud_val(pud) & _PAGE_PSE)
> -		return PUD_PAGE_MASK & PHYSICAL_PAGE_MASK;
> +		return ~((1ULL << PUD_SHIFT) - 1) & PHYSICAL_PAGE_MASK;
>   	else
>   		return PTE_PFN_MASK;
>   }
>   
>   static inline pudval_t pud_flags_mask(pud_t pud)
>   {
> -	if (native_pud_val(pud) & _PAGE_PSE)
> -		return ~(PUD_PAGE_MASK & (pudval_t)PHYSICAL_PAGE_MASK);
> -	else
> -		return ~PTE_PFN_MASK;
> +	return ~pud_pfn_mask(pud);
>   }
>   
>   static inline pudval_t pud_flags(pud_t pud)
> @@ -300,17 +297,14 @@ static inline pudval_t pud_flags(pud_t pud)
>   static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
>   {
>   	if (native_pmd_val(pmd) & _PAGE_PSE)
> -		return PMD_PAGE_MASK & PHYSICAL_PAGE_MASK;
> +		return ~((1ULL << PMD_SHIFT) - 1) & PHYSICAL_PAGE_MASK;
>   	else
>   		return PTE_PFN_MASK;
>   }
>   
>   static inline pmdval_t pmd_flags_mask(pmd_t pmd)
>   {
> -	if (native_pmd_val(pmd) & _PAGE_PSE)
> -		return ~(PMD_PAGE_MASK & (pmdval_t)PHYSICAL_PAGE_MASK);
> -	else
> -		return ~PTE_PFN_MASK;
> +	return ~pmd_pfn_mask(pmd);
>   }
>   
>   static inline pmdval_t pmd_flags(pmd_t pmd)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-11-09 22:36             ` Boris Ostrovsky
  0 siblings, 0 replies; 52+ messages in thread
From: Boris Ostrovsky @ 2015-11-09 22:36 UTC (permalink / raw)
  To: Kirill A. Shutemov
  Cc: Toshi Kani, hpa, tglx, mingo, akpm, bp, linux-mm, linux-kernel,
	x86, jgross, konrad.wilk, elliott

On 11/09/2015 03:47 PM, Kirill A. Shutemov wrote:
> On Mon, Nov 09, 2015 at 02:39:31PM -0500, Boris Ostrovsky wrote:
>> On 11/09/2015 02:16 PM, Toshi Kani wrote:
>>> On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
>>>> On 09/17/2015 02:24 PM, Toshi Kani wrote:
>>>>> Now that we have pud/pmd mask interfaces, which handle pfn & flags
>>>>> mask properly for the large PAT bit.
>>>>>
>>>>> Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
>>>>> PTE_FLAGS_MASK with the pud/pmd mask interfaces.
>>>>>
>>>>> Suggested-by: Juergen Gross <jgross@suse.com>
>>>>> Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
>>>>> Cc: Juergen Gross <jgross@suse.com>
>>>>> Cc: Konrad Wilk <konrad.wilk@oracle.com>
>>>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>>>> Cc: H. Peter Anvin <hpa@zytor.com>
>>>>> Cc: Ingo Molnar <mingo@redhat.com>
>>>>> Cc: Borislav Petkov <bp@alien8.de>
>>>>> ---
>>>>>    arch/x86/include/asm/pgtable.h       |   14 ++++++++------
>>>>>    arch/x86/include/asm/pgtable_types.h |    4 ++--
>>>>>    2 files changed, 10 insertions(+), 8 deletions(-)
>>>>>
>>>> Looks like this commit is causing this splat for 32-bit kernels. I am
>>>> attaching my config file, just in case.
>>> Thanks for the report!  I'd like to reproduce the issue since I am not sure how
>>> this change caused it...
>>>
>>> I tried to build a kernel with the attached config file, and got the following
>>> error.  Not sure what I am missing.
>>>
>>> ----
>>> $ make -j24 ARCH=i386
>>>     :
>>>    LD      drivers/built-in.o
>>>    LINK    vmlinux
>>> ./.config: line 44: $'\r': command not found
>> I wonder whether my email client added ^Ms to the file that I send. It
>> shouldn't have.
>>
>>> Makefile:929: recipe for target 'vmlinux' failed
>>> make: *** [vmlinux] Error 127
>>> ----
>>>
>>> Do you have steps to reproduce the issue?  Or do you see it during boot-time?
>> This always happens just after system has booted, it may still be going over
>> init scripts. I am booting with ramdisk, don't know whether it has anything
>> to do with this problem.
>>
>> FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it
>> alone makes this crash go away.
> Could you check the patch below?


I does fix the problem on baremetal, thanks. My 32-bit Xen guests still 
fail which I thought was the same issue but now that I looked at it more 
carefully it has different signature.

-boris


>
> diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
> index dd5b0aa9dd2f..c1e797266ce9 100644
> --- a/arch/x86/include/asm/pgtable_types.h
> +++ b/arch/x86/include/asm/pgtable_types.h
> @@ -279,17 +279,14 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
>   static inline pudval_t pud_pfn_mask(pud_t pud)
>   {
>   	if (native_pud_val(pud) & _PAGE_PSE)
> -		return PUD_PAGE_MASK & PHYSICAL_PAGE_MASK;
> +		return ~((1ULL << PUD_SHIFT) - 1) & PHYSICAL_PAGE_MASK;
>   	else
>   		return PTE_PFN_MASK;
>   }
>   
>   static inline pudval_t pud_flags_mask(pud_t pud)
>   {
> -	if (native_pud_val(pud) & _PAGE_PSE)
> -		return ~(PUD_PAGE_MASK & (pudval_t)PHYSICAL_PAGE_MASK);
> -	else
> -		return ~PTE_PFN_MASK;
> +	return ~pud_pfn_mask(pud);
>   }
>   
>   static inline pudval_t pud_flags(pud_t pud)
> @@ -300,17 +297,14 @@ static inline pudval_t pud_flags(pud_t pud)
>   static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
>   {
>   	if (native_pmd_val(pmd) & _PAGE_PSE)
> -		return PMD_PAGE_MASK & PHYSICAL_PAGE_MASK;
> +		return ~((1ULL << PMD_SHIFT) - 1) & PHYSICAL_PAGE_MASK;
>   	else
>   		return PTE_PFN_MASK;
>   }
>   
>   static inline pmdval_t pmd_flags_mask(pmd_t pmd)
>   {
> -	if (native_pmd_val(pmd) & _PAGE_PSE)
> -		return ~(PMD_PAGE_MASK & (pmdval_t)PHYSICAL_PAGE_MASK);
> -	else
> -		return ~PTE_PFN_MASK;
> +	return ~pmd_pfn_mask(pmd);
>   }
>   
>   static inline pmdval_t pmd_flags(pmd_t pmd)


^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-11-09 22:36             ` Boris Ostrovsky
@ 2015-11-09 23:18               ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-11-09 23:18 UTC (permalink / raw)
  To: Boris Ostrovsky, Kirill A. Shutemov
  Cc: hpa, tglx, mingo, akpm, bp, linux-mm, linux-kernel, x86, jgross,
	konrad.wilk, elliott

On Mon, 2015-11-09 at 17:36 -0500, Boris Ostrovsky wrote:
> On 11/09/2015 03:47 PM, Kirill A. Shutemov wrote:
> > On Mon, Nov 09, 2015 at 02:39:31PM -0500, Boris Ostrovsky wrote:
> > > On 11/09/2015 02:16 PM, Toshi Kani wrote:
> > > > On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> > > > > On 09/17/2015 02:24 PM, Toshi Kani wrote:
> > > > > > Now that we have pud/pmd mask interfaces, which handle pfn & flags
> > > > > > mask properly for the large PAT bit.
> > > > > > 
> > > > > > Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> > > > > > PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> > > > > > 
> > > > > > Suggested-by: Juergen Gross <jgross@suse.com>
> > > > > > Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> > > > > > Cc: Juergen Gross <jgross@suse.com>
> > > > > > Cc: Konrad Wilk <konrad.wilk@oracle.com>
> > > > > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > > > > Cc: H. Peter Anvin <hpa@zytor.com>
> > > > > > Cc: Ingo Molnar <mingo@redhat.com>
> > > > > > Cc: Borislav Petkov <bp@alien8.de>
> > > > > > ---
> > > > > >    arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> > > > > >    arch/x86/include/asm/pgtable_types.h |    4 ++--
> > > > > >    2 files changed, 10 insertions(+), 8 deletions(-)
> > > > > > 
> > > > > Looks like this commit is causing this splat for 32-bit kernels. I am
> > > > > attaching my config file, just in case.
> > > > Thanks for the report!  I'd like to reproduce the issue since I am not
> > > > sure how
> > > > this change caused it...
> > > > 
> > > > I tried to build a kernel with the attached config file, and got the
> > > > following
> > > > error.  Not sure what I am missing.
> > > > 
> > > > ----
> > > > $ make -j24 ARCH=i386
> > > >     :
> > > >    LD      drivers/built-in.o
> > > >    LINK    vmlinux
> > > > ./.config: line 44: $'\r': command not found
> > > I wonder whether my email client added ^Ms to the file that I send. It
> > > shouldn't have.
> > > 
> > > > Makefile:929: recipe for target 'vmlinux' failed
> > > > make: *** [vmlinux] Error 127
> > > > ----
> > > > 
> > > > Do you have steps to reproduce the issue?  Or do you see it during boot
> > > > -time?
> > > This always happens just after system has booted, it may still be going
> > > over
> > > init scripts. I am booting with ramdisk, don't know whether it has
> > > anything
> > > to do with this problem.
> > > 
> > > FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it
> > > alone makes this crash go away.
> > Could you check the patch below?
> 
> 
> I does fix the problem on baremetal, thanks. My 32-bit Xen guests still 
> fail which I thought was the same issue but now that I looked at it more 
> carefully it has different signature.

I do not think Xen is hitting this, but I think page_level_mask() has the same
issue for a long time.  I will set up 32-bit env on a system with >4GB memory to
verify this.

Thanks,
-Toshi

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-11-09 23:18               ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-11-09 23:18 UTC (permalink / raw)
  To: Boris Ostrovsky, Kirill A. Shutemov
  Cc: hpa, tglx, mingo, akpm, bp, linux-mm, linux-kernel, x86, jgross,
	konrad.wilk, elliott

On Mon, 2015-11-09 at 17:36 -0500, Boris Ostrovsky wrote:
> On 11/09/2015 03:47 PM, Kirill A. Shutemov wrote:
> > On Mon, Nov 09, 2015 at 02:39:31PM -0500, Boris Ostrovsky wrote:
> > > On 11/09/2015 02:16 PM, Toshi Kani wrote:
> > > > On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> > > > > On 09/17/2015 02:24 PM, Toshi Kani wrote:
> > > > > > Now that we have pud/pmd mask interfaces, which handle pfn & flags
> > > > > > mask properly for the large PAT bit.
> > > > > > 
> > > > > > Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> > > > > > PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> > > > > > 
> > > > > > Suggested-by: Juergen Gross <jgross@suse.com>
> > > > > > Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> > > > > > Cc: Juergen Gross <jgross@suse.com>
> > > > > > Cc: Konrad Wilk <konrad.wilk@oracle.com>
> > > > > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > > > > Cc: H. Peter Anvin <hpa@zytor.com>
> > > > > > Cc: Ingo Molnar <mingo@redhat.com>
> > > > > > Cc: Borislav Petkov <bp@alien8.de>
> > > > > > ---
> > > > > >    arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> > > > > >    arch/x86/include/asm/pgtable_types.h |    4 ++--
> > > > > >    2 files changed, 10 insertions(+), 8 deletions(-)
> > > > > > 
> > > > > Looks like this commit is causing this splat for 32-bit kernels. I am
> > > > > attaching my config file, just in case.
> > > > Thanks for the report!  I'd like to reproduce the issue since I am not
> > > > sure how
> > > > this change caused it...
> > > > 
> > > > I tried to build a kernel with the attached config file, and got the
> > > > following
> > > > error.  Not sure what I am missing.
> > > > 
> > > > ----
> > > > $ make -j24 ARCH=i386
> > > >     :
> > > >    LD      drivers/built-in.o
> > > >    LINK    vmlinux
> > > > ./.config: line 44: $'\r': command not found
> > > I wonder whether my email client added ^Ms to the file that I send. It
> > > shouldn't have.
> > > 
> > > > Makefile:929: recipe for target 'vmlinux' failed
> > > > make: *** [vmlinux] Error 127
> > > > ----
> > > > 
> > > > Do you have steps to reproduce the issue?  Or do you see it during boot
> > > > -time?
> > > This always happens just after system has booted, it may still be going
> > > over
> > > init scripts. I am booting with ramdisk, don't know whether it has
> > > anything
> > > to do with this problem.
> > > 
> > > FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it
> > > alone makes this crash go away.
> > Could you check the patch below?
> 
> 
> I does fix the problem on baremetal, thanks. My 32-bit Xen guests still 
> fail which I thought was the same issue but now that I looked at it more 
> carefully it has different signature.

I do not think Xen is hitting this, but I think page_level_mask() has the same
issue for a long time.  I will set up 32-bit env on a system with >4GB memory to
verify this.

Thanks,
-Toshi


^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-11-09 23:18               ` Toshi Kani
@ 2015-11-10  0:40                 ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-11-10  0:40 UTC (permalink / raw)
  To: Boris Ostrovsky, Kirill A. Shutemov
  Cc: hpa, tglx, mingo, akpm, bp, linux-mm, linux-kernel, x86, jgross,
	konrad.wilk, elliott

On Mon, 2015-11-09 at 16:18 -0700, Toshi Kani wrote:
> On Mon, 2015-11-09 at 17:36 -0500, Boris Ostrovsky wrote:
> > On 11/09/2015 03:47 PM, Kirill A. Shutemov wrote:
> > > On Mon, Nov 09, 2015 at 02:39:31PM -0500, Boris Ostrovsky wrote:
> > > > On 11/09/2015 02:16 PM, Toshi Kani wrote:
 :
> > > > 
> > > > FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it
> > > > alone makes this crash go away.
> > > Could you check the patch below?
> > 
> > 
> > I does fix the problem on baremetal, thanks. My 32-bit Xen guests still 
> > fail which I thought was the same issue but now that I looked at it more 
> > carefully it has different signature.
> 
> I do not think Xen is hitting this, but I think page_level_mask() has the same
> issue for a long time.  I will set up 32-bit env on a system with >4GB memory 
> to verify this.

As Kirill explained me in his code review comment for *PAGE_MASK, page_level_mas
k() is fine as it is used for virtual addresses.

-Toshi  

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-11-10  0:40                 ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-11-10  0:40 UTC (permalink / raw)
  To: Boris Ostrovsky, Kirill A. Shutemov
  Cc: hpa, tglx, mingo, akpm, bp, linux-mm, linux-kernel, x86, jgross,
	konrad.wilk, elliott

On Mon, 2015-11-09 at 16:18 -0700, Toshi Kani wrote:
> On Mon, 2015-11-09 at 17:36 -0500, Boris Ostrovsky wrote:
> > On 11/09/2015 03:47 PM, Kirill A. Shutemov wrote:
> > > On Mon, Nov 09, 2015 at 02:39:31PM -0500, Boris Ostrovsky wrote:
> > > > On 11/09/2015 02:16 PM, Toshi Kani wrote:
 :
> > > > 
> > > > FWIW, it looks like pmd_pfn_mask() inline is causing this. Reverting it
> > > > alone makes this crash go away.
> > > Could you check the patch below?
> > 
> > 
> > I does fix the problem on baremetal, thanks. My 32-bit Xen guests still 
> > fail which I thought was the same issue but now that I looked at it more 
> > carefully it has different signature.
> 
> I do not think Xen is hitting this, but I think page_level_mask() has the same
> issue for a long time.  I will set up 32-bit env on a system with >4GB memory 
> to verify this.

As Kirill explained me in his code review comment for *PAGE_MASK, page_level_mas
k() is fine as it is used for virtual addresses.

-Toshi  

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-11-09 19:16       ` Toshi Kani
@ 2015-11-09 20:10         ` Kirill A. Shutemov
  -1 siblings, 0 replies; 52+ messages in thread
From: Kirill A. Shutemov @ 2015-11-09 20:10 UTC (permalink / raw)
  To: Toshi Kani
  Cc: Boris Ostrovsky, hpa, tglx, mingo, akpm, bp, linux-mm,
	linux-kernel, x86, jgross, konrad.wilk, elliott

On Mon, Nov 09, 2015 at 12:16:41PM -0700, Toshi Kani wrote:
> On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> > On 09/17/2015 02:24 PM, Toshi Kani wrote:
> > > Now that we have pud/pmd mask interfaces, which handle pfn & flags
> > > mask properly for the large PAT bit.
> > > 
> > > Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> > > PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> > > 
> > > Suggested-by: Juergen Gross <jgross@suse.com>
> > > Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> > > Cc: Juergen Gross <jgross@suse.com>
> > > Cc: Konrad Wilk <konrad.wilk@oracle.com>
> > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > Cc: H. Peter Anvin <hpa@zytor.com>
> > > Cc: Ingo Molnar <mingo@redhat.com>
> > > Cc: Borislav Petkov <bp@alien8.de>
> > > ---
> > >   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> > >   arch/x86/include/asm/pgtable_types.h |    4 ++--
> > >   2 files changed, 10 insertions(+), 8 deletions(-)
> > > 
> > 
> > 
> > Looks like this commit is causing this splat for 32-bit kernels. I am 
> > attaching my config file, just in case.
> 
> Thanks for the report!  I'd like to reproduce the issue since I am not sure how
> this change caused it...
> 
> I tried to build a kernel with the attached config file, and got the following
> error.  Not sure what I am missing.  

The problem is that PMD_PAGE_MASK as well as PUD_PAGE_MASK are 'unsigned
long', not 'unsigned long long'. So on 32-bit with PAE enabled your
pmd_pfn_mask()/pud_pfn_mask() will truncate bits 32..43 of pmd/pudval and
you'll never get proper page frame for pages above 4G.

-- 
 Kirill A. Shutemov

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-11-09 20:10         ` Kirill A. Shutemov
  0 siblings, 0 replies; 52+ messages in thread
From: Kirill A. Shutemov @ 2015-11-09 20:10 UTC (permalink / raw)
  To: Toshi Kani
  Cc: Boris Ostrovsky, hpa, tglx, mingo, akpm, bp, linux-mm,
	linux-kernel, x86, jgross, konrad.wilk, elliott

On Mon, Nov 09, 2015 at 12:16:41PM -0700, Toshi Kani wrote:
> On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> > On 09/17/2015 02:24 PM, Toshi Kani wrote:
> > > Now that we have pud/pmd mask interfaces, which handle pfn & flags
> > > mask properly for the large PAT bit.
> > > 
> > > Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> > > PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> > > 
> > > Suggested-by: Juergen Gross <jgross@suse.com>
> > > Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> > > Cc: Juergen Gross <jgross@suse.com>
> > > Cc: Konrad Wilk <konrad.wilk@oracle.com>
> > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > Cc: H. Peter Anvin <hpa@zytor.com>
> > > Cc: Ingo Molnar <mingo@redhat.com>
> > > Cc: Borislav Petkov <bp@alien8.de>
> > > ---
> > >   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> > >   arch/x86/include/asm/pgtable_types.h |    4 ++--
> > >   2 files changed, 10 insertions(+), 8 deletions(-)
> > > 
> > 
> > 
> > Looks like this commit is causing this splat for 32-bit kernels. I am 
> > attaching my config file, just in case.
> 
> Thanks for the report!  I'd like to reproduce the issue since I am not sure how
> this change caused it...
> 
> I tried to build a kernel with the attached config file, and got the following
> error.  Not sure what I am missing.  

The problem is that PMD_PAGE_MASK as well as PUD_PAGE_MASK are 'unsigned
long', not 'unsigned long long'. So on 32-bit with PAE enabled your
pmd_pfn_mask()/pud_pfn_mask() will truncate bits 32..43 of pmd/pudval and
you'll never get proper page frame for pages above 4G.

-- 
 Kirill A. Shutemov

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
  2015-11-09 20:10         ` Kirill A. Shutemov
@ 2015-11-09 21:01           ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-11-09 21:01 UTC (permalink / raw)
  To: Kirill A. Shutemov
  Cc: Boris Ostrovsky, hpa, tglx, mingo, akpm, bp, linux-mm,
	linux-kernel, x86, jgross, konrad.wilk, elliott

On Mon, 2015-11-09 at 22:10 +0200, Kirill A. Shutemov wrote:
> On Mon, Nov 09, 2015 at 12:16:41PM -0700, Toshi Kani wrote:
> > On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> > > On 09/17/2015 02:24 PM, Toshi Kani wrote:
> > > > Now that we have pud/pmd mask interfaces, which handle pfn & flags
> > > > mask properly for the large PAT bit.
> > > > 
> > > > Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> > > > PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> > > > 
> > > > Suggested-by: Juergen Gross <jgross@suse.com>
> > > > Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> > > > Cc: Juergen Gross <jgross@suse.com>
> > > > Cc: Konrad Wilk <konrad.wilk@oracle.com>
> > > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > > Cc: H. Peter Anvin <hpa@zytor.com>
> > > > Cc: Ingo Molnar <mingo@redhat.com>
> > > > Cc: Borislav Petkov <bp@alien8.de>
> > > > ---
> > > >   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> > > >   arch/x86/include/asm/pgtable_types.h |    4 ++--
> > > >   2 files changed, 10 insertions(+), 8 deletions(-)
> > > > 
> > > 
> > > 
> > > Looks like this commit is causing this splat for 32-bit kernels. I am 
> > > attaching my config file, just in case.
> > 
> > Thanks for the report!  I'd like to reproduce the issue since I am not sure 
> > how this change caused it...
> > 
> > I tried to build a kernel with the attached config file, and got the 
> > following error.  Not sure what I am missing.  
> 
> The problem is that PMD_PAGE_MASK as well as PUD_PAGE_MASK are 'unsigned
> long', not 'unsigned long long'. So on 32-bit with PAE enabled your
> pmd_pfn_mask()/pud_pfn_mask() will truncate bits 32..43 of pmd/pudval and
> you'll never get proper page frame for pages above 4G.

Thanks Kirill!  Yes, this explains the issue.  Since I did not change these
MASKs, and I tested 32-bit kernels on a small system, I was not able to catch
this issue...
-Toshi

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd interfaces to handle large PAT bit
@ 2015-11-09 21:01           ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-11-09 21:01 UTC (permalink / raw)
  To: Kirill A. Shutemov
  Cc: Boris Ostrovsky, hpa, tglx, mingo, akpm, bp, linux-mm,
	linux-kernel, x86, jgross, konrad.wilk, elliott

On Mon, 2015-11-09 at 22:10 +0200, Kirill A. Shutemov wrote:
> On Mon, Nov 09, 2015 at 12:16:41PM -0700, Toshi Kani wrote:
> > On Mon, 2015-11-09 at 13:06 -0500, Boris Ostrovsky wrote:
> > > On 09/17/2015 02:24 PM, Toshi Kani wrote:
> > > > Now that we have pud/pmd mask interfaces, which handle pfn & flags
> > > > mask properly for the large PAT bit.
> > > > 
> > > > Fix pud/pmd pfn & flags interfaces by replacing PTE_PFN_MASK and
> > > > PTE_FLAGS_MASK with the pud/pmd mask interfaces.
> > > > 
> > > > Suggested-by: Juergen Gross <jgross@suse.com>
> > > > Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> > > > Cc: Juergen Gross <jgross@suse.com>
> > > > Cc: Konrad Wilk <konrad.wilk@oracle.com>
> > > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > > Cc: H. Peter Anvin <hpa@zytor.com>
> > > > Cc: Ingo Molnar <mingo@redhat.com>
> > > > Cc: Borislav Petkov <bp@alien8.de>
> > > > ---
> > > >   arch/x86/include/asm/pgtable.h       |   14 ++++++++------
> > > >   arch/x86/include/asm/pgtable_types.h |    4 ++--
> > > >   2 files changed, 10 insertions(+), 8 deletions(-)
> > > > 
> > > 
> > > 
> > > Looks like this commit is causing this splat for 32-bit kernels. I am 
> > > attaching my config file, just in case.
> > 
> > Thanks for the report!  I'd like to reproduce the issue since I am not sure 
> > how this change caused it...
> > 
> > I tried to build a kernel with the attached config file, and got the 
> > following error.  Not sure what I am missing.  
> 
> The problem is that PMD_PAGE_MASK as well as PUD_PAGE_MASK are 'unsigned
> long', not 'unsigned long long'. So on 32-bit with PAE enabled your
> pmd_pfn_mask()/pud_pfn_mask() will truncate bits 32..43 of pmd/pudval and
> you'll never get proper page frame for pages above 4G.

Thanks Kirill!  Yes, this explains the issue.  Since I did not change these
MASKs, and I tested 32-bit kernels on a small system, I was not able to catch
this issue...
-Toshi

^ permalink raw reply	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 5/11] x86/asm: Add pud_pgprot() and pmd_pgprot()
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

pte_pgprot() returns a pgprot_t value by calling pte_flags().  Now
that pud_flags() and pmd_flags() work specifically for the pud/pmd
levels, define pud_pgprot() and pmd_pgprot() for PUD/PMD.

Also update pte_pgprot() to remove the unnecessary mask with
PTE_FLAGS_MASK as pte_flags() takes care of it.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/include/asm/pgtable.h |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 714ad06..40a9ffa 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -376,7 +376,9 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 	return __pgprot(preservebits | addbits);
 }
 
-#define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
+#define pte_pgprot(x) __pgprot(pte_flags(x))
+#define pmd_pgprot(x) __pgprot(pmd_flags(x))
+#define pud_pgprot(x) __pgprot(pud_flags(x))
 
 #define canon_pgprot(p) __pgprot(massage_pgprot(p))
 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 5/11] x86/asm: Add pud_pgprot() and pmd_pgprot()
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

pte_pgprot() returns a pgprot_t value by calling pte_flags().  Now
that pud_flags() and pmd_flags() work specifically for the pud/pmd
levels, define pud_pgprot() and pmd_pgprot() for PUD/PMD.

Also update pte_pgprot() to remove the unnecessary mask with
PTE_FLAGS_MASK as pte_flags() takes care of it.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
---
 arch/x86/include/asm/pgtable.h |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 714ad06..40a9ffa 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -376,7 +376,9 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 	return __pgprot(preservebits | addbits);
 }
 
-#define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
+#define pte_pgprot(x) __pgprot(pte_flags(x))
+#define pmd_pgprot(x) __pgprot(pmd_flags(x))
+#define pud_pgprot(x) __pgprot(pud_flags(x))
 
 #define canon_pgprot(p) __pgprot(massage_pgprot(p))
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/asm: Add pud_pgprot() and pmd_pgprot()
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:43   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:43 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: toshi.kani, konrad.wilk, hpa, linux-kernel, mingo, elliott, tglx,
	bp, akpm, jgross, mingo

Commit-ID:  bbac8c6deadab921f4b7d00ce675ffa4f358ec7f
Gitweb:     http://git.kernel.org/tip/bbac8c6deadab921f4b7d00ce675ffa4f358ec7f
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:18 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:32 +0200

x86/asm: Add pud_pgprot() and pmd_pgprot()

pte_pgprot() returns a pgprot_t value by calling pte_flags().  Now
that pud_flags() and pmd_flags() work specifically for the pud/pmd
levels, define pud_pgprot() and pmd_pgprot() for PUD/PMD.

Also update pte_pgprot() to remove the unnecessary mask with
PTE_FLAGS_MASK as pte_flags() takes care of it.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-6-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/pgtable.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 0733ec7..59fc341 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -379,7 +379,9 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 	return __pgprot(preservebits | addbits);
 }
 
-#define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
+#define pte_pgprot(x) __pgprot(pte_flags(x))
+#define pmd_pgprot(x) __pgprot(pmd_flags(x))
+#define pud_pgprot(x) __pgprot(pud_flags(x))
 
 #define canon_pgprot(p) __pgprot(massage_pgprot(p))
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 6/11] x86/mm: Fix page table dump to show PAT bit
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani, Robert Elliott

/sys/kernel/debug/kernel_page_tables does not show the PAT bit for
PUD/PMD mappings.  This is because walk_pud_level(), walk_pmd_level()
and note_page() mask the flags with PTE_FLAGS_MASK, which does not
cover their PAT bit, _PAGE_PAT_LARGE.

Fix it by replacing the use of PTE_FLAGS_MASK with p?d_flags(),
which masks the flags properly.

Also change to show the PAT bit as "PAT" to be consistent with
other bits.

Reported-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Robert Elliott <elliott@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/dump_pagetables.c |   39 +++++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index f0cedf3..71ab2d7 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -155,7 +155,7 @@ static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
 			pt_dump_cont_printf(m, dmsg, "    ");
 		if ((level == 4 && pr & _PAGE_PAT) ||
 		    ((level == 3 || level == 2) && pr & _PAGE_PAT_LARGE))
-			pt_dump_cont_printf(m, dmsg, "pat ");
+			pt_dump_cont_printf(m, dmsg, "PAT ");
 		else
 			pt_dump_cont_printf(m, dmsg, "    ");
 		if (pr & _PAGE_GLOBAL)
@@ -198,8 +198,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot) & PTE_FLAGS_MASK;
-	cur = pgprot_val(st->current_prot) & PTE_FLAGS_MASK;
+	prot = pgprot_val(new_prot);
+	cur = pgprot_val(st->current_prot);
 
 	if (!st->level) {
 		/* First entry */
@@ -269,13 +269,13 @@ static void walk_pte_level(struct seq_file *m, struct pg_state *st, pmd_t addr,
 {
 	int i;
 	pte_t *start;
+	pgprotval_t prot;
 
 	start = (pte_t *) pmd_page_vaddr(addr);
 	for (i = 0; i < PTRS_PER_PTE; i++) {
-		pgprot_t prot = pte_pgprot(*start);
-
+		prot = pte_flags(*start);
 		st->current_address = normalize_addr(P + i * PTE_LEVEL_MULT);
-		note_page(m, st, prot, 4);
+		note_page(m, st, __pgprot(prot), 4);
 		start++;
 	}
 }
@@ -287,18 +287,19 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
 {
 	int i;
 	pmd_t *start;
+	pgprotval_t prot;
 
 	start = (pmd_t *) pud_page_vaddr(addr);
 	for (i = 0; i < PTRS_PER_PMD; i++) {
 		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
 		if (!pmd_none(*start)) {
-			pgprotval_t prot = pmd_val(*start) & PTE_FLAGS_MASK;
-
-			if (pmd_large(*start) || !pmd_present(*start))
+			if (pmd_large(*start) || !pmd_present(*start)) {
+				prot = pmd_flags(*start);
 				note_page(m, st, __pgprot(prot), 3);
-			else
+			} else {
 				walk_pte_level(m, st, *start,
 					       P + i * PMD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, st, __pgprot(0), 3);
 		start++;
@@ -318,19 +319,20 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 {
 	int i;
 	pud_t *start;
+	pgprotval_t prot;
 
 	start = (pud_t *) pgd_page_vaddr(addr);
 
 	for (i = 0; i < PTRS_PER_PUD; i++) {
 		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
 		if (!pud_none(*start)) {
-			pgprotval_t prot = pud_val(*start) & PTE_FLAGS_MASK;
-
-			if (pud_large(*start) || !pud_present(*start))
+			if (pud_large(*start) || !pud_present(*start)) {
+				prot = pud_flags(*start);
 				note_page(m, st, __pgprot(prot), 2);
-			else
+			} else {
 				walk_pmd_level(m, st, *start,
 					       P + i * PUD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, st, __pgprot(0), 2);
 
@@ -351,6 +353,7 @@ void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
 #else
 	pgd_t *start = swapper_pg_dir;
 #endif
+	pgprotval_t prot;
 	int i;
 	struct pg_state st = {};
 
@@ -362,13 +365,13 @@ void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
 		if (!pgd_none(*start)) {
-			pgprotval_t prot = pgd_val(*start) & PTE_FLAGS_MASK;
-
-			if (pgd_large(*start) || !pgd_present(*start))
+			if (pgd_large(*start) || !pgd_present(*start)) {
+				prot = pgd_flags(*start);
 				note_page(m, &st, __pgprot(prot), 1);
-			else
+			} else {
 				walk_pud_level(m, &st, *start,
 					       i * PGD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, &st, __pgprot(0), 1);
 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 6/11] x86/mm: Fix page table dump to show PAT bit
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani, Robert Elliott

/sys/kernel/debug/kernel_page_tables does not show the PAT bit for
PUD/PMD mappings.  This is because walk_pud_level(), walk_pmd_level()
and note_page() mask the flags with PTE_FLAGS_MASK, which does not
cover their PAT bit, _PAGE_PAT_LARGE.

Fix it by replacing the use of PTE_FLAGS_MASK with p?d_flags(),
which masks the flags properly.

Also change to show the PAT bit as "PAT" to be consistent with
other bits.

Reported-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Robert Elliott <elliott@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/dump_pagetables.c |   39 +++++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index f0cedf3..71ab2d7 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -155,7 +155,7 @@ static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
 			pt_dump_cont_printf(m, dmsg, "    ");
 		if ((level == 4 && pr & _PAGE_PAT) ||
 		    ((level == 3 || level == 2) && pr & _PAGE_PAT_LARGE))
-			pt_dump_cont_printf(m, dmsg, "pat ");
+			pt_dump_cont_printf(m, dmsg, "PAT ");
 		else
 			pt_dump_cont_printf(m, dmsg, "    ");
 		if (pr & _PAGE_GLOBAL)
@@ -198,8 +198,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot) & PTE_FLAGS_MASK;
-	cur = pgprot_val(st->current_prot) & PTE_FLAGS_MASK;
+	prot = pgprot_val(new_prot);
+	cur = pgprot_val(st->current_prot);
 
 	if (!st->level) {
 		/* First entry */
@@ -269,13 +269,13 @@ static void walk_pte_level(struct seq_file *m, struct pg_state *st, pmd_t addr,
 {
 	int i;
 	pte_t *start;
+	pgprotval_t prot;
 
 	start = (pte_t *) pmd_page_vaddr(addr);
 	for (i = 0; i < PTRS_PER_PTE; i++) {
-		pgprot_t prot = pte_pgprot(*start);
-
+		prot = pte_flags(*start);
 		st->current_address = normalize_addr(P + i * PTE_LEVEL_MULT);
-		note_page(m, st, prot, 4);
+		note_page(m, st, __pgprot(prot), 4);
 		start++;
 	}
 }
@@ -287,18 +287,19 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
 {
 	int i;
 	pmd_t *start;
+	pgprotval_t prot;
 
 	start = (pmd_t *) pud_page_vaddr(addr);
 	for (i = 0; i < PTRS_PER_PMD; i++) {
 		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
 		if (!pmd_none(*start)) {
-			pgprotval_t prot = pmd_val(*start) & PTE_FLAGS_MASK;
-
-			if (pmd_large(*start) || !pmd_present(*start))
+			if (pmd_large(*start) || !pmd_present(*start)) {
+				prot = pmd_flags(*start);
 				note_page(m, st, __pgprot(prot), 3);
-			else
+			} else {
 				walk_pte_level(m, st, *start,
 					       P + i * PMD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, st, __pgprot(0), 3);
 		start++;
@@ -318,19 +319,20 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 {
 	int i;
 	pud_t *start;
+	pgprotval_t prot;
 
 	start = (pud_t *) pgd_page_vaddr(addr);
 
 	for (i = 0; i < PTRS_PER_PUD; i++) {
 		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
 		if (!pud_none(*start)) {
-			pgprotval_t prot = pud_val(*start) & PTE_FLAGS_MASK;
-
-			if (pud_large(*start) || !pud_present(*start))
+			if (pud_large(*start) || !pud_present(*start)) {
+				prot = pud_flags(*start);
 				note_page(m, st, __pgprot(prot), 2);
-			else
+			} else {
 				walk_pmd_level(m, st, *start,
 					       P + i * PUD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, st, __pgprot(0), 2);
 
@@ -351,6 +353,7 @@ void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
 #else
 	pgd_t *start = swapper_pg_dir;
 #endif
+	pgprotval_t prot;
 	int i;
 	struct pg_state st = {};
 
@@ -362,13 +365,13 @@ void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
 		if (!pgd_none(*start)) {
-			pgprotval_t prot = pgd_val(*start) & PTE_FLAGS_MASK;
-
-			if (pgd_large(*start) || !pgd_present(*start))
+			if (pgd_large(*start) || !pgd_present(*start)) {
+				prot = pgd_flags(*start);
 				note_page(m, &st, __pgprot(prot), 1);
-			else
+			} else {
 				walk_pud_level(m, &st, *start,
 					       i * PGD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, &st, __pgprot(0), 1);
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/mm: Fix page table dump to show PAT bit
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:44   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:44 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: jgross, elliott, hpa, linux-kernel, toshi.kani, tglx, konrad.wilk,
	mingo, mingo, bp, akpm

Commit-ID:  da25e628c4c231a281b1c1de3168a36ab9bfe473
Gitweb:     http://git.kernel.org/tip/da25e628c4c231a281b1c1de3168a36ab9bfe473
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:19 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:32 +0200

x86/mm: Fix page table dump to show PAT bit

/sys/kernel/debug/kernel_page_tables does not show the PAT bit for
PUD/PMD mappings.  This is because walk_pud_level(), walk_pmd_level()
and note_page() mask the flags with PTE_FLAGS_MASK, which does not
cover their PAT bit, _PAGE_PAT_LARGE.

Fix it by replacing the use of PTE_FLAGS_MASK with p?d_flags(),
which masks the flags properly.

Also change to show the PAT bit as "PAT" to be consistent with
other bits.

Reported-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-7-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/mm/dump_pagetables.c | 39 +++++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index f0cedf3..71ab2d7 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -155,7 +155,7 @@ static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
 			pt_dump_cont_printf(m, dmsg, "    ");
 		if ((level == 4 && pr & _PAGE_PAT) ||
 		    ((level == 3 || level == 2) && pr & _PAGE_PAT_LARGE))
-			pt_dump_cont_printf(m, dmsg, "pat ");
+			pt_dump_cont_printf(m, dmsg, "PAT ");
 		else
 			pt_dump_cont_printf(m, dmsg, "    ");
 		if (pr & _PAGE_GLOBAL)
@@ -198,8 +198,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot) & PTE_FLAGS_MASK;
-	cur = pgprot_val(st->current_prot) & PTE_FLAGS_MASK;
+	prot = pgprot_val(new_prot);
+	cur = pgprot_val(st->current_prot);
 
 	if (!st->level) {
 		/* First entry */
@@ -269,13 +269,13 @@ static void walk_pte_level(struct seq_file *m, struct pg_state *st, pmd_t addr,
 {
 	int i;
 	pte_t *start;
+	pgprotval_t prot;
 
 	start = (pte_t *) pmd_page_vaddr(addr);
 	for (i = 0; i < PTRS_PER_PTE; i++) {
-		pgprot_t prot = pte_pgprot(*start);
-
+		prot = pte_flags(*start);
 		st->current_address = normalize_addr(P + i * PTE_LEVEL_MULT);
-		note_page(m, st, prot, 4);
+		note_page(m, st, __pgprot(prot), 4);
 		start++;
 	}
 }
@@ -287,18 +287,19 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
 {
 	int i;
 	pmd_t *start;
+	pgprotval_t prot;
 
 	start = (pmd_t *) pud_page_vaddr(addr);
 	for (i = 0; i < PTRS_PER_PMD; i++) {
 		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
 		if (!pmd_none(*start)) {
-			pgprotval_t prot = pmd_val(*start) & PTE_FLAGS_MASK;
-
-			if (pmd_large(*start) || !pmd_present(*start))
+			if (pmd_large(*start) || !pmd_present(*start)) {
+				prot = pmd_flags(*start);
 				note_page(m, st, __pgprot(prot), 3);
-			else
+			} else {
 				walk_pte_level(m, st, *start,
 					       P + i * PMD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, st, __pgprot(0), 3);
 		start++;
@@ -318,19 +319,20 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 {
 	int i;
 	pud_t *start;
+	pgprotval_t prot;
 
 	start = (pud_t *) pgd_page_vaddr(addr);
 
 	for (i = 0; i < PTRS_PER_PUD; i++) {
 		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
 		if (!pud_none(*start)) {
-			pgprotval_t prot = pud_val(*start) & PTE_FLAGS_MASK;
-
-			if (pud_large(*start) || !pud_present(*start))
+			if (pud_large(*start) || !pud_present(*start)) {
+				prot = pud_flags(*start);
 				note_page(m, st, __pgprot(prot), 2);
-			else
+			} else {
 				walk_pmd_level(m, st, *start,
 					       P + i * PUD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, st, __pgprot(0), 2);
 
@@ -351,6 +353,7 @@ void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
 #else
 	pgd_t *start = swapper_pg_dir;
 #endif
+	pgprotval_t prot;
 	int i;
 	struct pg_state st = {};
 
@@ -362,13 +365,13 @@ void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
 		if (!pgd_none(*start)) {
-			pgprotval_t prot = pgd_val(*start) & PTE_FLAGS_MASK;
-
-			if (pgd_large(*start) || !pgd_present(*start))
+			if (pgd_large(*start) || !pgd_present(*start)) {
+				prot = pgd_flags(*start);
 				note_page(m, &st, __pgprot(prot), 1);
-			else
+			} else {
 				walk_pud_level(m, &st, *start,
 					       i * PGD_LEVEL_MULT);
+			}
 		} else
 			note_page(m, &st, __pgprot(0), 1);
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 7/11] x86/mm: Fix slow_virt_to_phys() to handle large PAT bit
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

slow_virt_to_phys() calls lookup_address() to obtain *pte and
its level.  It then calls pte_pfn() to obtain a physical address
for any level.  However, this physical address is not correct
when the large PAT bit is set because pte_pfn() does not mask
the large PAT bit properly for PUD/PMD.

Fix slow_virt_to_phys() to use pud_pfn() and pmd_pfn() for 1GB
and 2MB mapping levels.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/pageattr.c |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index b6c2659..023b639 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -415,18 +415,28 @@ pmd_t *lookup_pmd_address(unsigned long address)
 phys_addr_t slow_virt_to_phys(void *__virt_addr)
 {
 	unsigned long virt_addr = (unsigned long)__virt_addr;
-	phys_addr_t phys_addr;
-	unsigned long offset;
+	unsigned long phys_addr, offset;
 	enum pg_level level;
-	unsigned long pmask;
 	pte_t *pte;
 
 	pte = lookup_address(virt_addr, &level);
 	BUG_ON(!pte);
-	pmask = page_level_mask(level);
-	offset = virt_addr & ~pmask;
-	phys_addr = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT;
-	return (phys_addr | offset);
+
+	switch (level) {
+	case PG_LEVEL_1G:
+		phys_addr = pud_pfn(*(pud_t *)pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PUD_PAGE_MASK;
+		break;
+	case PG_LEVEL_2M:
+		phys_addr = pmd_pfn(*(pmd_t *)pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PMD_PAGE_MASK;
+		break;
+	default:
+		phys_addr = pte_pfn(*pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PAGE_MASK;
+	}
+
+	return (phys_addr_t)(phys_addr | offset);
 }
 EXPORT_SYMBOL_GPL(slow_virt_to_phys);
 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 7/11] x86/mm: Fix slow_virt_to_phys() to handle large PAT bit
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

slow_virt_to_phys() calls lookup_address() to obtain *pte and
its level.  It then calls pte_pfn() to obtain a physical address
for any level.  However, this physical address is not correct
when the large PAT bit is set because pte_pfn() does not mask
the large PAT bit properly for PUD/PMD.

Fix slow_virt_to_phys() to use pud_pfn() and pmd_pfn() for 1GB
and 2MB mapping levels.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/pageattr.c |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index b6c2659..023b639 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -415,18 +415,28 @@ pmd_t *lookup_pmd_address(unsigned long address)
 phys_addr_t slow_virt_to_phys(void *__virt_addr)
 {
 	unsigned long virt_addr = (unsigned long)__virt_addr;
-	phys_addr_t phys_addr;
-	unsigned long offset;
+	unsigned long phys_addr, offset;
 	enum pg_level level;
-	unsigned long pmask;
 	pte_t *pte;
 
 	pte = lookup_address(virt_addr, &level);
 	BUG_ON(!pte);
-	pmask = page_level_mask(level);
-	offset = virt_addr & ~pmask;
-	phys_addr = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT;
-	return (phys_addr | offset);
+
+	switch (level) {
+	case PG_LEVEL_1G:
+		phys_addr = pud_pfn(*(pud_t *)pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PUD_PAGE_MASK;
+		break;
+	case PG_LEVEL_2M:
+		phys_addr = pmd_pfn(*(pmd_t *)pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PMD_PAGE_MASK;
+		break;
+	default:
+		phys_addr = pte_pfn(*pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PAGE_MASK;
+	}
+
+	return (phys_addr_t)(phys_addr | offset);
 }
 EXPORT_SYMBOL_GPL(slow_virt_to_phys);
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/mm: Fix slow_virt_to_phys() to handle large PAT bit
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:44   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:44 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: elliott, hpa, akpm, mingo, toshi.kani, mingo, jgross, tglx,
	linux-kernel, konrad.wilk, bp

Commit-ID:  34437e67a6727885bdf6cbfd8441b1ac43a1ee65
Gitweb:     http://git.kernel.org/tip/34437e67a6727885bdf6cbfd8441b1ac43a1ee65
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:20 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:33 +0200

x86/mm: Fix slow_virt_to_phys() to handle large PAT bit

slow_virt_to_phys() calls lookup_address() to obtain *pte and
its level.  It then calls pte_pfn() to obtain a physical address
for any level.  However, this physical address is not correct
when the large PAT bit is set because pte_pfn() does not mask
the large PAT bit properly for PUD/PMD.

Fix slow_virt_to_phys() to use pud_pfn() and pmd_pfn() for 1GB
and 2MB mapping levels.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-8-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/mm/pageattr.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 2c44c07..1441368 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -414,18 +414,28 @@ pmd_t *lookup_pmd_address(unsigned long address)
 phys_addr_t slow_virt_to_phys(void *__virt_addr)
 {
 	unsigned long virt_addr = (unsigned long)__virt_addr;
-	phys_addr_t phys_addr;
-	unsigned long offset;
+	unsigned long phys_addr, offset;
 	enum pg_level level;
-	unsigned long pmask;
 	pte_t *pte;
 
 	pte = lookup_address(virt_addr, &level);
 	BUG_ON(!pte);
-	pmask = page_level_mask(level);
-	offset = virt_addr & ~pmask;
-	phys_addr = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT;
-	return (phys_addr | offset);
+
+	switch (level) {
+	case PG_LEVEL_1G:
+		phys_addr = pud_pfn(*(pud_t *)pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PUD_PAGE_MASK;
+		break;
+	case PG_LEVEL_2M:
+		phys_addr = pmd_pfn(*(pmd_t *)pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PMD_PAGE_MASK;
+		break;
+	default:
+		phys_addr = pte_pfn(*pte) << PAGE_SHIFT;
+		offset = virt_addr & ~PAGE_MASK;
+	}
+
+	return (phys_addr_t)(phys_addr | offset);
 }
 EXPORT_SYMBOL_GPL(slow_virt_to_phys);
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 8/11] x86/mm: Fix gup_huge_p?d() to handle large PAT bit
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

gup_huge_pud() and gup_huge_pmd() cast *pud and *pmd to *pte,
and use pte_xxx() interfaces to obtain the flags and PFN.
However, the pte_xxx() interface does not handle the large
PAT bit properly for PUD/PMD.

Fix gup_huge_pud() and gup_huge_pmd() to use pud_xxx() and
pmd_xxx() interfaces according to their type.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/gup.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 81bf3d2..ae9a37b 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -118,21 +118,20 @@ static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	unsigned long mask;
-	pte_t pte = *(pte_t *)&pmd;
 	struct page *head, *page;
 	int refs;
 
 	mask = _PAGE_PRESENT|_PAGE_USER;
 	if (write)
 		mask |= _PAGE_RW;
-	if ((pte_flags(pte) & mask) != mask)
+	if ((pmd_flags(pmd) & mask) != mask)
 		return 0;
 	/* hugepages are never "special" */
-	VM_BUG_ON(pte_flags(pte) & _PAGE_SPECIAL);
-	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+	VM_BUG_ON(pmd_flags(pmd) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pmd_pfn(pmd)));
 
 	refs = 0;
-	head = pte_page(pte);
+	head = pmd_page(pmd);
 	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
 	do {
 		VM_BUG_ON_PAGE(compound_head(page) != head, page);
@@ -195,21 +194,20 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	unsigned long mask;
-	pte_t pte = *(pte_t *)&pud;
 	struct page *head, *page;
 	int refs;
 
 	mask = _PAGE_PRESENT|_PAGE_USER;
 	if (write)
 		mask |= _PAGE_RW;
-	if ((pte_flags(pte) & mask) != mask)
+	if ((pud_flags(pud) & mask) != mask)
 		return 0;
 	/* hugepages are never "special" */
-	VM_BUG_ON(pte_flags(pte) & _PAGE_SPECIAL);
-	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+	VM_BUG_ON(pud_flags(pud) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pud_pfn(pud)));
 
 	refs = 0;
-	head = pte_page(pte);
+	head = pud_page(pud);
 	page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
 	do {
 		VM_BUG_ON_PAGE(compound_head(page) != head, page);

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 8/11] x86/mm: Fix gup_huge_p?d() to handle large PAT bit
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

gup_huge_pud() and gup_huge_pmd() cast *pud and *pmd to *pte,
and use pte_xxx() interfaces to obtain the flags and PFN.
However, the pte_xxx() interface does not handle the large
PAT bit properly for PUD/PMD.

Fix gup_huge_pud() and gup_huge_pmd() to use pud_xxx() and
pmd_xxx() interfaces according to their type.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/gup.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 81bf3d2..ae9a37b 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -118,21 +118,20 @@ static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	unsigned long mask;
-	pte_t pte = *(pte_t *)&pmd;
 	struct page *head, *page;
 	int refs;
 
 	mask = _PAGE_PRESENT|_PAGE_USER;
 	if (write)
 		mask |= _PAGE_RW;
-	if ((pte_flags(pte) & mask) != mask)
+	if ((pmd_flags(pmd) & mask) != mask)
 		return 0;
 	/* hugepages are never "special" */
-	VM_BUG_ON(pte_flags(pte) & _PAGE_SPECIAL);
-	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+	VM_BUG_ON(pmd_flags(pmd) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pmd_pfn(pmd)));
 
 	refs = 0;
-	head = pte_page(pte);
+	head = pmd_page(pmd);
 	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
 	do {
 		VM_BUG_ON_PAGE(compound_head(page) != head, page);
@@ -195,21 +194,20 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	unsigned long mask;
-	pte_t pte = *(pte_t *)&pud;
 	struct page *head, *page;
 	int refs;
 
 	mask = _PAGE_PRESENT|_PAGE_USER;
 	if (write)
 		mask |= _PAGE_RW;
-	if ((pte_flags(pte) & mask) != mask)
+	if ((pud_flags(pud) & mask) != mask)
 		return 0;
 	/* hugepages are never "special" */
-	VM_BUG_ON(pte_flags(pte) & _PAGE_SPECIAL);
-	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+	VM_BUG_ON(pud_flags(pud) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pud_pfn(pud)));
 
 	refs = 0;
-	head = pte_page(pte);
+	head = pud_page(pud);
 	page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
 	do {
 		VM_BUG_ON_PAGE(compound_head(page) != head, page);

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/mm: Fix gup_huge_p?d() to handle large PAT bit
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:44   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:44 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: mingo, elliott, mingo, hpa, konrad.wilk, tglx, bp, toshi.kani,
	linux-kernel, jgross, akpm

Commit-ID:  daf3e35c5888e8bd6a2f5ed15ed392b2df362ecf
Gitweb:     http://git.kernel.org/tip/daf3e35c5888e8bd6a2f5ed15ed392b2df362ecf
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:21 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:33 +0200

x86/mm: Fix gup_huge_p?d() to handle large PAT bit

gup_huge_pud() and gup_huge_pmd() cast *pud and *pmd to *pte,
and use pte_xxx() interfaces to obtain the flags and PFN.
However, the pte_xxx() interface does not handle the large
PAT bit properly for PUD/PMD.

Fix gup_huge_pud() and gup_huge_pmd() to use pud_xxx() and
pmd_xxx() interfaces according to their type.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-9-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/mm/gup.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 81bf3d2..ae9a37b 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -118,21 +118,20 @@ static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	unsigned long mask;
-	pte_t pte = *(pte_t *)&pmd;
 	struct page *head, *page;
 	int refs;
 
 	mask = _PAGE_PRESENT|_PAGE_USER;
 	if (write)
 		mask |= _PAGE_RW;
-	if ((pte_flags(pte) & mask) != mask)
+	if ((pmd_flags(pmd) & mask) != mask)
 		return 0;
 	/* hugepages are never "special" */
-	VM_BUG_ON(pte_flags(pte) & _PAGE_SPECIAL);
-	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+	VM_BUG_ON(pmd_flags(pmd) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pmd_pfn(pmd)));
 
 	refs = 0;
-	head = pte_page(pte);
+	head = pmd_page(pmd);
 	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
 	do {
 		VM_BUG_ON_PAGE(compound_head(page) != head, page);
@@ -195,21 +194,20 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	unsigned long mask;
-	pte_t pte = *(pte_t *)&pud;
 	struct page *head, *page;
 	int refs;
 
 	mask = _PAGE_PRESENT|_PAGE_USER;
 	if (write)
 		mask |= _PAGE_RW;
-	if ((pte_flags(pte) & mask) != mask)
+	if ((pud_flags(pud) & mask) != mask)
 		return 0;
 	/* hugepages are never "special" */
-	VM_BUG_ON(pte_flags(pte) & _PAGE_SPECIAL);
-	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+	VM_BUG_ON(pud_flags(pud) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pud_pfn(pud)));
 
 	refs = 0;
-	head = pte_page(pte);
+	head = pud_page(pud);
 	page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
 	do {
 		VM_BUG_ON_PAGE(compound_head(page) != head, page);

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 9/11] x86/mm: Fix try_preserve_large_page() to handle large PAT bit
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

try_preserve_large_page() is called from __change_page_attr() to
change the mapping attribute of a given large page.  This function
uses pte_pfn() and pte_pgprot() for PUD/PMD, which do not handle
the large PAT bit properly.

Fix try_preserve_large_page() by using the corresponding pud/pmd
prot/pfn interfaces.

Also remove '#ifdef CONFIG_X86_64', which is not necessary.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/pageattr.c |   24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 023b639..d055557 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -486,7 +486,7 @@ static int
 try_preserve_large_page(pte_t *kpte, unsigned long address,
 			struct cpa_data *cpa)
 {
-	unsigned long nextpage_addr, numpages, pmask, psize, addr, pfn;
+	unsigned long nextpage_addr, numpages, pmask, psize, addr, pfn, old_pfn;
 	pte_t new_pte, old_pte, *tmp;
 	pgprot_t old_prot, new_prot, req_prot;
 	int i, do_split = 1;
@@ -506,17 +506,21 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 
 	switch (level) {
 	case PG_LEVEL_2M:
-#ifdef CONFIG_X86_64
+		old_prot = pmd_pgprot(*(pmd_t *)kpte);
+		old_pfn = pmd_pfn(*(pmd_t *)kpte);
+		break;
 	case PG_LEVEL_1G:
-#endif
-		psize = page_level_size(level);
-		pmask = page_level_mask(level);
+		old_prot = pud_pgprot(*(pud_t *)kpte);
+		old_pfn = pud_pfn(*(pud_t *)kpte);
 		break;
 	default:
 		do_split = -EINVAL;
 		goto out_unlock;
 	}
 
+	psize = page_level_size(level);
+	pmask = page_level_mask(level);
+
 	/*
 	 * Calculate the number of pages, which fit into this large
 	 * page starting at address:
@@ -532,7 +536,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * up accordingly.
 	 */
 	old_pte = *kpte;
-	old_prot = req_prot = pgprot_large_2_4k(pte_pgprot(old_pte));
+	old_prot = req_prot = pgprot_large_2_4k(old_prot);
 
 	pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr);
 	pgprot_val(req_prot) |= pgprot_val(cpa->mask_set);
@@ -558,10 +562,10 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	req_prot = canon_pgprot(req_prot);
 
 	/*
-	 * old_pte points to the large page base address. So we need
+	 * old_pfn points to the large page base pfn. So we need
 	 * to add the offset of the virtual address:
 	 */
-	pfn = pte_pfn(old_pte) + ((address & (psize - 1)) >> PAGE_SHIFT);
+	pfn = old_pfn + ((address & (psize - 1)) >> PAGE_SHIFT);
 	cpa->pfn = pfn;
 
 	new_prot = static_protections(req_prot, address, pfn);
@@ -572,7 +576,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * the pages in the range we try to preserve:
 	 */
 	addr = address & pmask;
-	pfn = pte_pfn(old_pte);
+	pfn = old_pfn;
 	for (i = 0; i < (psize >> PAGE_SHIFT); i++, addr += PAGE_SIZE, pfn++) {
 		pgprot_t chk_prot = static_protections(req_prot, addr, pfn);
 
@@ -602,7 +606,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 		 * The address is aligned and the number of pages
 		 * covers the full page.
 		 */
-		new_pte = pfn_pte(pte_pfn(old_pte), new_prot);
+		new_pte = pfn_pte(old_pfn, new_prot);
 		__set_pmd_pte(kpte, address, new_pte);
 		cpa->flags |= CPA_FLUSHTLB;
 		do_split = 0;

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 9/11] x86/mm: Fix try_preserve_large_page() to handle large PAT bit
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

try_preserve_large_page() is called from __change_page_attr() to
change the mapping attribute of a given large page.  This function
uses pte_pfn() and pte_pgprot() for PUD/PMD, which do not handle
the large PAT bit properly.

Fix try_preserve_large_page() by using the corresponding pud/pmd
prot/pfn interfaces.

Also remove '#ifdef CONFIG_X86_64', which is not necessary.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/pageattr.c |   24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 023b639..d055557 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -486,7 +486,7 @@ static int
 try_preserve_large_page(pte_t *kpte, unsigned long address,
 			struct cpa_data *cpa)
 {
-	unsigned long nextpage_addr, numpages, pmask, psize, addr, pfn;
+	unsigned long nextpage_addr, numpages, pmask, psize, addr, pfn, old_pfn;
 	pte_t new_pte, old_pte, *tmp;
 	pgprot_t old_prot, new_prot, req_prot;
 	int i, do_split = 1;
@@ -506,17 +506,21 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 
 	switch (level) {
 	case PG_LEVEL_2M:
-#ifdef CONFIG_X86_64
+		old_prot = pmd_pgprot(*(pmd_t *)kpte);
+		old_pfn = pmd_pfn(*(pmd_t *)kpte);
+		break;
 	case PG_LEVEL_1G:
-#endif
-		psize = page_level_size(level);
-		pmask = page_level_mask(level);
+		old_prot = pud_pgprot(*(pud_t *)kpte);
+		old_pfn = pud_pfn(*(pud_t *)kpte);
 		break;
 	default:
 		do_split = -EINVAL;
 		goto out_unlock;
 	}
 
+	psize = page_level_size(level);
+	pmask = page_level_mask(level);
+
 	/*
 	 * Calculate the number of pages, which fit into this large
 	 * page starting at address:
@@ -532,7 +536,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * up accordingly.
 	 */
 	old_pte = *kpte;
-	old_prot = req_prot = pgprot_large_2_4k(pte_pgprot(old_pte));
+	old_prot = req_prot = pgprot_large_2_4k(old_prot);
 
 	pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr);
 	pgprot_val(req_prot) |= pgprot_val(cpa->mask_set);
@@ -558,10 +562,10 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	req_prot = canon_pgprot(req_prot);
 
 	/*
-	 * old_pte points to the large page base address. So we need
+	 * old_pfn points to the large page base pfn. So we need
 	 * to add the offset of the virtual address:
 	 */
-	pfn = pte_pfn(old_pte) + ((address & (psize - 1)) >> PAGE_SHIFT);
+	pfn = old_pfn + ((address & (psize - 1)) >> PAGE_SHIFT);
 	cpa->pfn = pfn;
 
 	new_prot = static_protections(req_prot, address, pfn);
@@ -572,7 +576,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * the pages in the range we try to preserve:
 	 */
 	addr = address & pmask;
-	pfn = pte_pfn(old_pte);
+	pfn = old_pfn;
 	for (i = 0; i < (psize >> PAGE_SHIFT); i++, addr += PAGE_SIZE, pfn++) {
 		pgprot_t chk_prot = static_protections(req_prot, addr, pfn);
 
@@ -602,7 +606,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 		 * The address is aligned and the number of pages
 		 * covers the full page.
 		 */
-		new_pte = pfn_pte(pte_pfn(old_pte), new_prot);
+		new_pte = pfn_pte(old_pfn, new_prot);
 		__set_pmd_pte(kpte, address, new_pte);
 		cpa->flags |= CPA_FLUSHTLB;
 		do_split = 0;

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/mm: Fix try_preserve_large_page() to handle large PAT bit
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:45   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:45 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: linux-kernel, elliott, hpa, toshi.kani, bp, konrad.wilk, mingo,
	jgross, mingo, akpm, tglx

Commit-ID:  3a19109efbfa7d887996a74257556a46e00525c2
Gitweb:     http://git.kernel.org/tip/3a19109efbfa7d887996a74257556a46e00525c2
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:22 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:33 +0200

x86/mm: Fix try_preserve_large_page() to handle large PAT bit

try_preserve_large_page() is called from __change_page_attr() to
change the mapping attribute of a given large page.  This function
uses pte_pfn() and pte_pgprot() for PUD/PMD, which do not handle
the large PAT bit properly.

Fix try_preserve_large_page() by using the corresponding pud/pmd
prot/pfn interfaces.

Also remove '#ifdef CONFIG_X86_64', which is not necessary.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-10-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/mm/pageattr.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 1441368..3f61271 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -468,7 +468,7 @@ static int
 try_preserve_large_page(pte_t *kpte, unsigned long address,
 			struct cpa_data *cpa)
 {
-	unsigned long nextpage_addr, numpages, pmask, psize, addr, pfn;
+	unsigned long nextpage_addr, numpages, pmask, psize, addr, pfn, old_pfn;
 	pte_t new_pte, old_pte, *tmp;
 	pgprot_t old_prot, new_prot, req_prot;
 	int i, do_split = 1;
@@ -488,17 +488,21 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 
 	switch (level) {
 	case PG_LEVEL_2M:
-#ifdef CONFIG_X86_64
+		old_prot = pmd_pgprot(*(pmd_t *)kpte);
+		old_pfn = pmd_pfn(*(pmd_t *)kpte);
+		break;
 	case PG_LEVEL_1G:
-#endif
-		psize = page_level_size(level);
-		pmask = page_level_mask(level);
+		old_prot = pud_pgprot(*(pud_t *)kpte);
+		old_pfn = pud_pfn(*(pud_t *)kpte);
 		break;
 	default:
 		do_split = -EINVAL;
 		goto out_unlock;
 	}
 
+	psize = page_level_size(level);
+	pmask = page_level_mask(level);
+
 	/*
 	 * Calculate the number of pages, which fit into this large
 	 * page starting at address:
@@ -514,7 +518,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * up accordingly.
 	 */
 	old_pte = *kpte;
-	old_prot = req_prot = pgprot_large_2_4k(pte_pgprot(old_pte));
+	old_prot = req_prot = pgprot_large_2_4k(old_prot);
 
 	pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr);
 	pgprot_val(req_prot) |= pgprot_val(cpa->mask_set);
@@ -540,10 +544,10 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	req_prot = canon_pgprot(req_prot);
 
 	/*
-	 * old_pte points to the large page base address. So we need
+	 * old_pfn points to the large page base pfn. So we need
 	 * to add the offset of the virtual address:
 	 */
-	pfn = pte_pfn(old_pte) + ((address & (psize - 1)) >> PAGE_SHIFT);
+	pfn = old_pfn + ((address & (psize - 1)) >> PAGE_SHIFT);
 	cpa->pfn = pfn;
 
 	new_prot = static_protections(req_prot, address, pfn);
@@ -554,7 +558,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * the pages in the range we try to preserve:
 	 */
 	addr = address & pmask;
-	pfn = pte_pfn(old_pte);
+	pfn = old_pfn;
 	for (i = 0; i < (psize >> PAGE_SHIFT); i++, addr += PAGE_SIZE, pfn++) {
 		pgprot_t chk_prot = static_protections(req_prot, addr, pfn);
 
@@ -584,7 +588,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 		 * The address is aligned and the number of pages
 		 * covers the full page.
 		 */
-		new_pte = pfn_pte(pte_pfn(old_pte), new_prot);
+		new_pte = pfn_pte(old_pfn, new_prot);
 		__set_pmd_pte(kpte, address, new_pte);
 		cpa->flags |= CPA_FLUSHTLB;
 		do_split = 0;

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 10/11] x86/mm: Fix __split_large_page() to handle large PAT bit
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

__split_large_page() is called from __change_page_attr() to change
the mapping attribute by splitting a given large page into smaller
pages.  This function uses pte_pfn() and pte_pgprot() for PUD/PMD,
which do not handle the large PAT bit properly.

Fix __split_large_page() by using the corresponding pud/pmd pfn/
pgprot interfaces.

Also remove '#ifdef CONFIG_X86_64', which is not necessary.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/pageattr.c |   31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index d055557..b64a451 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -623,7 +623,7 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 		   struct page *base)
 {
 	pte_t *pbase = (pte_t *)page_address(base);
-	unsigned long pfn, pfninc = 1;
+	unsigned long ref_pfn, pfn, pfninc = 1;
 	unsigned int i, level;
 	pte_t *tmp;
 	pgprot_t ref_prot;
@@ -640,26 +640,33 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 	}
 
 	paravirt_alloc_pte(&init_mm, page_to_pfn(base));
-	ref_prot = pte_pgprot(pte_clrhuge(*kpte));
 
-	/* promote PAT bit to correct position */
-	if (level == PG_LEVEL_2M)
+	switch (level) {
+	case PG_LEVEL_2M:
+		ref_prot = pmd_pgprot(*(pmd_t *)kpte);
+		/* clear PSE and promote PAT bit to correct position */
 		ref_prot = pgprot_large_2_4k(ref_prot);
+		ref_pfn = pmd_pfn(*(pmd_t *)kpte);
+		break;
 
-#ifdef CONFIG_X86_64
-	if (level == PG_LEVEL_1G) {
+	case PG_LEVEL_1G:
+		ref_prot = pud_pgprot(*(pud_t *)kpte);
+		ref_pfn = pud_pfn(*(pud_t *)kpte);
 		pfninc = PMD_PAGE_SIZE >> PAGE_SHIFT;
+
 		/*
-		 * Set the PSE flags only if the PRESENT flag is set
+		 * Clear the PSE flags if the PRESENT flag is not set
 		 * otherwise pmd_present/pmd_huge will return true
 		 * even on a non present pmd.
 		 */
-		if (pgprot_val(ref_prot) & _PAGE_PRESENT)
-			pgprot_val(ref_prot) |= _PAGE_PSE;
-		else
+		if (!(pgprot_val(ref_prot) & _PAGE_PRESENT))
 			pgprot_val(ref_prot) &= ~_PAGE_PSE;
+		break;
+
+	default:
+		spin_unlock(&pgd_lock);
+		return 1;
 	}
-#endif
 
 	/*
 	 * Set the GLOBAL flags only if the PRESENT flag is set
@@ -675,7 +682,7 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 	/*
 	 * Get the target pfn from the original entry:
 	 */
-	pfn = pte_pfn(*kpte);
+	pfn = ref_pfn;
 	for (i = 0; i < PTRS_PER_PTE; i++, pfn += pfninc)
 		set_pte(&pbase[i], pfn_pte(pfn, canon_pgprot(ref_prot)));
 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 10/11] x86/mm: Fix __split_large_page() to handle large PAT bit
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

__split_large_page() is called from __change_page_attr() to change
the mapping attribute by splitting a given large page into smaller
pages.  This function uses pte_pfn() and pte_pgprot() for PUD/PMD,
which do not handle the large PAT bit properly.

Fix __split_large_page() by using the corresponding pud/pmd pfn/
pgprot interfaces.

Also remove '#ifdef CONFIG_X86_64', which is not necessary.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/pageattr.c |   31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index d055557..b64a451 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -623,7 +623,7 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 		   struct page *base)
 {
 	pte_t *pbase = (pte_t *)page_address(base);
-	unsigned long pfn, pfninc = 1;
+	unsigned long ref_pfn, pfn, pfninc = 1;
 	unsigned int i, level;
 	pte_t *tmp;
 	pgprot_t ref_prot;
@@ -640,26 +640,33 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 	}
 
 	paravirt_alloc_pte(&init_mm, page_to_pfn(base));
-	ref_prot = pte_pgprot(pte_clrhuge(*kpte));
 
-	/* promote PAT bit to correct position */
-	if (level == PG_LEVEL_2M)
+	switch (level) {
+	case PG_LEVEL_2M:
+		ref_prot = pmd_pgprot(*(pmd_t *)kpte);
+		/* clear PSE and promote PAT bit to correct position */
 		ref_prot = pgprot_large_2_4k(ref_prot);
+		ref_pfn = pmd_pfn(*(pmd_t *)kpte);
+		break;
 
-#ifdef CONFIG_X86_64
-	if (level == PG_LEVEL_1G) {
+	case PG_LEVEL_1G:
+		ref_prot = pud_pgprot(*(pud_t *)kpte);
+		ref_pfn = pud_pfn(*(pud_t *)kpte);
 		pfninc = PMD_PAGE_SIZE >> PAGE_SHIFT;
+
 		/*
-		 * Set the PSE flags only if the PRESENT flag is set
+		 * Clear the PSE flags if the PRESENT flag is not set
 		 * otherwise pmd_present/pmd_huge will return true
 		 * even on a non present pmd.
 		 */
-		if (pgprot_val(ref_prot) & _PAGE_PRESENT)
-			pgprot_val(ref_prot) |= _PAGE_PSE;
-		else
+		if (!(pgprot_val(ref_prot) & _PAGE_PRESENT))
 			pgprot_val(ref_prot) &= ~_PAGE_PSE;
+		break;
+
+	default:
+		spin_unlock(&pgd_lock);
+		return 1;
 	}
-#endif
 
 	/*
 	 * Set the GLOBAL flags only if the PRESENT flag is set
@@ -675,7 +682,7 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 	/*
 	 * Get the target pfn from the original entry:
 	 */
-	pfn = pte_pfn(*kpte);
+	pfn = ref_pfn;
 	for (i = 0; i < PTRS_PER_PTE; i++, pfn += pfninc)
 		set_pte(&pbase[i], pfn_pte(pfn, canon_pgprot(ref_prot)));
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/mm: Fix __split_large_page() to handle large PAT bit
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:45   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:45 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: hpa, mingo, linux-kernel, tglx, elliott, toshi.kani, konrad.wilk,
	mingo, akpm, bp, jgross

Commit-ID:  d551aaa2f7e1387fa66093ce9914c2e91f283a50
Gitweb:     http://git.kernel.org/tip/d551aaa2f7e1387fa66093ce9914c2e91f283a50
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:23 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:33 +0200

x86/mm: Fix __split_large_page() to handle large PAT bit

__split_large_page() is called from __change_page_attr() to change
the mapping attribute by splitting a given large page into smaller
pages.  This function uses pte_pfn() and pte_pgprot() for PUD/PMD,
which do not handle the large PAT bit properly.

Fix __split_large_page() by using the corresponding pud/pmd pfn/
pgprot interfaces.

Also remove '#ifdef CONFIG_X86_64', which is not necessary.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-11-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/mm/pageattr.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 3f61271..ab9465b 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -605,7 +605,7 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 		   struct page *base)
 {
 	pte_t *pbase = (pte_t *)page_address(base);
-	unsigned long pfn, pfninc = 1;
+	unsigned long ref_pfn, pfn, pfninc = 1;
 	unsigned int i, level;
 	pte_t *tmp;
 	pgprot_t ref_prot;
@@ -622,26 +622,33 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 	}
 
 	paravirt_alloc_pte(&init_mm, page_to_pfn(base));
-	ref_prot = pte_pgprot(pte_clrhuge(*kpte));
 
-	/* promote PAT bit to correct position */
-	if (level == PG_LEVEL_2M)
+	switch (level) {
+	case PG_LEVEL_2M:
+		ref_prot = pmd_pgprot(*(pmd_t *)kpte);
+		/* clear PSE and promote PAT bit to correct position */
 		ref_prot = pgprot_large_2_4k(ref_prot);
+		ref_pfn = pmd_pfn(*(pmd_t *)kpte);
+		break;
 
-#ifdef CONFIG_X86_64
-	if (level == PG_LEVEL_1G) {
+	case PG_LEVEL_1G:
+		ref_prot = pud_pgprot(*(pud_t *)kpte);
+		ref_pfn = pud_pfn(*(pud_t *)kpte);
 		pfninc = PMD_PAGE_SIZE >> PAGE_SHIFT;
+
 		/*
-		 * Set the PSE flags only if the PRESENT flag is set
+		 * Clear the PSE flags if the PRESENT flag is not set
 		 * otherwise pmd_present/pmd_huge will return true
 		 * even on a non present pmd.
 		 */
-		if (pgprot_val(ref_prot) & _PAGE_PRESENT)
-			pgprot_val(ref_prot) |= _PAGE_PSE;
-		else
+		if (!(pgprot_val(ref_prot) & _PAGE_PRESENT))
 			pgprot_val(ref_prot) &= ~_PAGE_PSE;
+		break;
+
+	default:
+		spin_unlock(&pgd_lock);
+		return 1;
 	}
-#endif
 
 	/*
 	 * Set the GLOBAL flags only if the PRESENT flag is set
@@ -657,7 +664,7 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
 	/*
 	 * Get the target pfn from the original entry:
 	 */
-	pfn = pte_pfn(*kpte);
+	pfn = ref_pfn;
 	for (i = 0; i < PTRS_PER_PTE; i++, pfn += pfninc)
 		set_pte(&pbase[i], pfn_pte(pfn, canon_pgprot(ref_prot)));
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 11/11] x86/mm: Fix no-change case in try_preserve_large_page()
  2015-09-17 18:24 ` Toshi Kani
@ 2015-09-17 18:24   ` Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

try_preserve_large_page() checks if new_prot is the same as
old_prot.  If so, it simply sets do_split to 0, and returns
with no-operation.  However, old_prot is set as a 4KB pgprot
value while new_prot is a large page pgprot value.

Now that old_prot is initially set from p?d_pgprot() as a
large page pgprot value, fix it by not overwriting old_prot
with a 4KB pgprot value.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/pageattr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index b64a451..97735f4 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -536,7 +536,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * up accordingly.
 	 */
 	old_pte = *kpte;
-	old_prot = req_prot = pgprot_large_2_4k(old_prot);
+	req_prot = pgprot_large_2_4k(old_prot);
 
 	pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr);
 	pgprot_val(req_prot) |= pgprot_val(cpa->mask_set);

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [PATCH v4 RESEND 11/11] x86/mm: Fix no-change case in try_preserve_large_page()
@ 2015-09-17 18:24   ` Toshi Kani
  0 siblings, 0 replies; 52+ messages in thread
From: Toshi Kani @ 2015-09-17 18:24 UTC (permalink / raw)
  To: hpa, tglx, mingo
  Cc: akpm, bp, linux-mm, linux-kernel, x86, jgross, konrad.wilk,
	elliott, Toshi Kani

try_preserve_large_page() checks if new_prot is the same as
old_prot.  If so, it simply sets do_split to 0, and returns
with no-operation.  However, old_prot is set as a 4KB pgprot
value while new_prot is a large page pgprot value.

Now that old_prot is initially set from p?d_pgprot() as a
large page pgprot value, fix it by not overwriting old_prot
with a 4KB pgprot value.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/mm/pageattr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index b64a451..97735f4 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -536,7 +536,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * up accordingly.
 	 */
 	old_pte = *kpte;
-	old_prot = req_prot = pgprot_large_2_4k(old_prot);
+	req_prot = pgprot_large_2_4k(old_prot);
 
 	pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr);
 	pgprot_val(req_prot) |= pgprot_val(cpa->mask_set);

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* [tip:x86/mm] x86/mm: Fix no-change case in try_preserve_large_page()
  2015-09-17 18:24   ` Toshi Kani
  (?)
@ 2015-09-22 19:45   ` tip-bot for Toshi Kani
  -1 siblings, 0 replies; 52+ messages in thread
From: tip-bot for Toshi Kani @ 2015-09-22 19:45 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: tglx, toshi.kani, bp, mingo, konrad.wilk, jgross, linux-kernel,
	mingo, elliott, akpm, hpa

Commit-ID:  55696b1f664e52b3036f21631f9c2247b667f587
Gitweb:     http://git.kernel.org/tip/55696b1f664e52b3036f21631f9c2247b667f587
Author:     Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Thu, 17 Sep 2015 12:24:24 -0600
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 22 Sep 2015 21:27:33 +0200

x86/mm: Fix no-change case in try_preserve_large_page()

try_preserve_large_page() checks if new_prot is the same as
old_prot.  If so, it simply sets do_split to 0, and returns
with no-operation.  However, old_prot is set as a 4KB pgprot
value while new_prot is a large page pgprot value.

Now that old_prot is initially set from p?d_pgprot() as a
large page pgprot value, fix it by not overwriting old_prot
with a 4KB pgprot value.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-12-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/mm/pageattr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index ab9465b..e2621a8 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -518,7 +518,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * up accordingly.
 	 */
 	old_pte = *kpte;
-	old_prot = req_prot = pgprot_large_2_4k(old_prot);
+	req_prot = pgprot_large_2_4k(old_prot);
 
 	pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr);
 	pgprot_val(req_prot) |= pgprot_val(cpa->mask_set);

^ permalink raw reply related	[flat|nested] 52+ messages in thread

end of thread, other threads:[~2015-11-10  0:44 UTC | newest]

Thread overview: 52+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-17 18:24 [PATCH v4 RESEND 0/11] x86/mm: Handle large PAT bit in pud/pmd interfaces Toshi Kani
2015-09-17 18:24 ` Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 1/11] x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:42   ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 2/11] x86/asm: Move PUD_PAGE macros to page_types.h Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:42   ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 3/11] x86/asm: Add pud/pmd mask interfaces to handle large PAT bit Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:43   ` [tip:x86/mm] x86/asm: Add pud/ pmd " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd " Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:43   ` [tip:x86/mm] x86/asm: Fix pud/ pmd " tip-bot for Toshi Kani
2015-11-09 18:06   ` [PATCH v4 RESEND 4/11] x86/asm: Fix pud/pmd " Boris Ostrovsky
2015-11-09 19:16     ` Toshi Kani
2015-11-09 19:16       ` Toshi Kani
2015-11-09 19:39       ` Boris Ostrovsky
2015-11-09 19:39         ` Boris Ostrovsky
2015-11-09 20:47         ` Kirill A. Shutemov
2015-11-09 20:47           ` Kirill A. Shutemov
2015-11-09 22:36           ` Boris Ostrovsky
2015-11-09 22:36             ` Boris Ostrovsky
2015-11-09 23:18             ` Toshi Kani
2015-11-09 23:18               ` Toshi Kani
2015-11-10  0:40               ` Toshi Kani
2015-11-10  0:40                 ` Toshi Kani
2015-11-09 20:10       ` Kirill A. Shutemov
2015-11-09 20:10         ` Kirill A. Shutemov
2015-11-09 21:01         ` Toshi Kani
2015-11-09 21:01           ` Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 5/11] x86/asm: Add pud_pgprot() and pmd_pgprot() Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:43   ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 6/11] x86/mm: Fix page table dump to show PAT bit Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:44   ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 7/11] x86/mm: Fix slow_virt_to_phys() to handle large " Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:44   ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 8/11] x86/mm: Fix gup_huge_p?d() " Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:44   ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 9/11] x86/mm: Fix try_preserve_large_page() " Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:45   ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 10/11] x86/mm: Fix __split_large_page() " Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:45   ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-09-17 18:24 ` [PATCH v4 RESEND 11/11] x86/mm: Fix no-change case in try_preserve_large_page() Toshi Kani
2015-09-17 18:24   ` Toshi Kani
2015-09-22 19:45   ` [tip:x86/mm] " tip-bot for Toshi Kani

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.