Re: [Qemu-devel] [kvm-unit-tests PATCHv5 3/3] arm: pmu: Add CPI checking

[Christopher Covington <cov@codeaurora.org>]

On 11/10/2015 09:05 PM, Andrew Jones wrote:
> On Mon, Nov 02, 2015 at 09:58:14AM -0600, Andrew Jones wrote:
>> On Fri, Oct 30, 2015 at 03:32:43PM -0400, Christopher Covington wrote:
>>> Hi Drew,
>>>
>>> On 10/30/2015 09:00 AM, Andrew Jones wrote:
>>>> On Wed, Oct 28, 2015 at 03:12:55PM -0400, Christopher Covington wrote:
>>>>> Calculate the numbers of cycles per instruction (CPI) implied by ARM
>>>>> PMU cycle counter values. The code includes a strict checking facility
>>>>> intended for the -icount option in TCG mode but it is not yet enabled
>>>>> in the configuration file. Enabling it must wait on infrastructure
>>>>> improvements which allow for different tests to be run on TCG versus
>>>>> KVM.
>>>>>
>>>>> Signed-off-by: Christopher Covington <cov@codeaurora.org>
>>>>> ---
>>>>>  arm/pmu.c | 103 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>>>>>  1 file changed, 102 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arm/pmu.c b/arm/pmu.c
>>>>> index 4334de4..788886a 100644
>>>>> --- a/arm/pmu.c
>>>>> +++ b/arm/pmu.c
>>>>> @@ -43,6 +43,23 @@ static inline unsigned long get_pmccntr(void)
>>>>>  	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (cycles));
>>>>>  	return cycles;
>>>>>  }
>>>>> +
>>>>> +/*
>>>>> + * Extra instructions inserted by the compiler would be difficult to compensate
>>>>> + * for, so hand assemble everything between, and including, the PMCR accesses
>>>>> + * to start and stop counting.
>>>>> + */
>>>>> +static inline void loop(int i, uint32_t pmcr)
>>>>> +{
>>>>> +	asm volatile(
>>>>> +	"	mcr	p15, 0, %[pmcr], c9, c12, 0\n"
>>>>> +	"1:	subs	%[i], %[i], #1\n"
>>>>> +	"	bgt	1b\n"
>>>>> +	"	mcr	p15, 0, %[z], c9, c12, 0\n"
>>>>> +	: [i] "+r" (i)
>>>>> +	: [pmcr] "r" (pmcr), [z] "r" (0)
>>>>> +	: "cc");
>>>>> +}
>>>>>  #elif defined(__aarch64__)
>>>>>  static inline uint32_t get_pmcr(void)
>>>>>  {
>>>>> @@ -64,6 +81,23 @@ static inline unsigned long get_pmccntr(void)
>>>>>  	asm volatile("mrs %0, pmccntr_el0" : "=r" (cycles));
>>>>>  	return cycles;
>>>>>  }
>>>>> +
>>>>> +/*
>>>>> + * Extra instructions inserted by the compiler would be difficult to compensate
>>>>> + * for, so hand assemble everything between, and including, the PMCR accesses
>>>>> + * to start and stop counting.
>>>>> + */
>>>>> +static inline void loop(int i, uint32_t pmcr)
>>>>> +{
>>>>> +	asm volatile(
>>>>> +	"	msr	pmcr_el0, %[pmcr]\n"
>>>>> +	"1:	subs	%[i], %[i], #1\n"
>>>>> +	"	b.gt	1b\n"
>>>>> +	"	msr	pmcr_el0, xzr\n"
>>>>> +	: [i] "+r" (i)
>>>>> +	: [pmcr] "r" (pmcr)
>>>>> +	: "cc");
>>>>> +}
>>>>>  #endif
>>>>>  
>>>>>  struct pmu_data {
>>>>> @@ -131,12 +165,79 @@ static bool check_cycles_increase(void)
>>>>>  	return true;
>>>>>  }
>>>>>  
>>>>> -int main(void)
>>>>> +/*
>>>>> + * Execute a known number of guest instructions. Only odd instruction counts
>>>>> + * greater than or equal to 3 are supported by the in-line assembly code. The
>>>>> + * control register (PMCR_EL0) is initialized with the provided value (allowing
>>>>> + * for example for the cycle counter or event counters to be reset). At the end
>>>>> + * of the exact instruction loop, zero is written to PMCR_EL0 to disable
>>>>> + * counting, allowing the cycle counter or event counters to be read at the
>>>>> + * leisure of the calling code.
>>>>> + */
>>>>> +static void measure_instrs(int num, uint32_t pmcr)
>>>>> +{
>>>>> +	int i = (num - 1) / 2;
>>>>> +
>>>>> +	assert(num >= 3 && ((num - 1) % 2 == 0));
>>>>> +	loop(i, pmcr);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Measure cycle counts for various known instruction counts. Ensure that the
>>>>> + * cycle counter progresses (similar to check_cycles_increase() but with more
>>>>> + * instructions and using reset and stop controls). If supplied a positive,
>>>>> + * nonzero CPI parameter, also strictly check that every measurement matches
>>>>> + * it. Strict CPI checking is used to test -icount mode.
>>>>> + */
>>>>> +static bool check_cpi(int cpi)
>>>>> +{
>>>>> +	struct pmu_data pmu = {0};
>>>>> +
>>>>> +	pmu.cycle_counter_reset = 1;
>>>>> +	pmu.enable = 1;
>>>>> +
>>>>> +	if (cpi > 0)
>>>>> +		printf("Checking for CPI=%d.\n", cpi);
>>>>> +	printf("instrs : cycles0 cycles1 ...\n");
>>>>> +
>>>>> +	for (int i = 3; i < 300; i += 32) {
>>>>> +		int avg, sum = 0;
>>>>> +
>>>>> +		printf("%d :", i);
>>>>> +		for (int j = 0; j < NR_SAMPLES; j++) {
>>>>> +			int cycles;
>>>>> +
>>>>> +			measure_instrs(i, pmu.pmcr_el0);
>>>>> +			cycles = get_pmccntr();
>>>>> +			printf(" %d", cycles);
>>>>> +
>>>>> +			if (!cycles || (cpi > 0 && cycles != i * cpi)) {
>>>>> +				printf("\n");
>>>>> +				return false;
>>>>> +			}
>>>>> +
>>>>> +			sum += cycles;
>>>>> +		}
>>>>> +		avg = sum / NR_SAMPLES;
>>>>> +		printf(" sum=%d avg=%d avg_ipc=%d avg_cpi=%d\n",
>>>>> +			sum, avg, i / avg, avg / i);
>>>>> +	}
>>>>> +
>>>>> +	return true;
>>>>> +}
>>>>> +
>>>>> +int main(int argc, char *argv[])
>>>>>  {
>>>>> +	int cpi = 0;
>>>>> +
>>>>> +	if (argc >= 1)
>>>>> +		cpi = atol(argv[0]);
>>>>> +
>>>>>  	report_prefix_push("pmu");
>>>>>  
>>>>>  	report("Control register", check_pmcr());
>>>>>  	report("Monotonically increasing cycle count", check_cycles_increase());
>>>>> +	report("Cycle/instruction ratio", check_cpi(cpi));
>>>>>  
>>>>>  	return report_summary();
>>>>>  }
>>>>
>>>> I applied and tested this (by adding -icount 1 -append 1 to the cmdline),
>>>
>>> Thanks for giving this a spin. For whatever reason the -icount argument is the
>>> exponent n in 2^n. I could match that logic if you prefer, but the pmu.c code
>>
>> Oh yeah, I forgot how you had that in your earlier posts. So in that
>> case
>>
>> Reviewed-by: Andrew Jones <drjones@redhat.com>
>>
>> I've applied these three patches to 
>>
>> https://github.com/rhdrjones/kvm-unit-tests/commits/staging
>>
>> I'll send a pull request to Paolo for that branch soon.
> 
> Hi Christopher,
> 
> I still have these queued on staging, but before we ask Paolo to commit,
> I think we should try them with Shannon's patches for KVM in order to
> make sure they work there, as well as with TCG (I have a feeling we'll
> need to initialize a couple more registers). Also, now that we've got
> the 'ACCEL' patch in master, we can take the unittests.cfg -icount patch
> as well. Can you please resubmit with any changes needed for KVM, and
> also with a unittests.cfg patch enabling both KVM and TCG tests?

Sure I'll do the additional testing and resubmit with any necessary modifications.

Christopher Covington

-- 
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project