* [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model
@ 2015-11-14 4:19 Simon Glass
2015-11-14 4:19 ` [U-Boot] [PATCH v4 1/8] dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig Simon Glass
` (8 more replies)
0 siblings, 9 replies; 13+ messages in thread
From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw)
To: u-boot
This series converts all Tegra boards to use driver model for PCI. The net
effect should be no change in functionality.
A few additional features are added to make this possible:
- Helper functions to support accessing 8- and 16-bit values within a 32-bit
word
- Fixing a build error for CONFIG_CMD_PCI_ENUM
- Decoding the PCI ranges property such that configuration ranges are
ignored
- Supporting bus-master devices on boards where RAM does not start at 0
This series is tested on beaver. It is available at u-boot-dm/tegra-working.
Changes in v4:
- Fix Kconig typo in commit message
- Drop CONFIG_CMD_PCI_ENUM for p2371-2180 also
- Fix merge conflict resolution error in v3
- Add compatible string for T210 (from Stephen Warren)
Changes in v3:
- Rebase onto tegra/master
- Enable DM_PCI for Tegra 210 family too
Changes in v2:
- Update commit message to explain that the feature is not important
- Drop the feature from tegra boards
- Rename 'addr' to 'size'
- Correct logic for use of gd->pci_ram_top
- Update commit message to mention future work
- Use the device_is_on_pci_bus() API
- Leave pci_skip_dev() at the bottom of the file to reduce the diff size
Simon Glass (8):
dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig
dm: pci: Avoid a driver model build error with CONFIG_CMD_PCI_ENUM
dm: pci: Set up the SDRAM mapping correctly
dm: pci: Support decoding ranges with duplicate entries
dm: pci: Add functions to emulate 8- and 16-bit access
dm: pci: Add a function to get the controller for a bus
dm: pci: Add a function to find the regions for a PCI bus
dm: tegra: pci: Convert tegra boards to driver model for PCI
arch/arm/mach-tegra/Kconfig | 2 +
common/cmd_pci.c | 4 +
configs/apalis_t30_defconfig | 1 +
configs/beaver_defconfig | 1 +
configs/cardhu_defconfig | 1 +
configs/jetson-tk1_defconfig | 1 +
configs/p2371-2180_defconfig | 1 +
configs/trimslice_defconfig | 1 +
drivers/pci/Kconfig | 10 +
drivers/pci/pci-uclass.c | 105 +++++++++-
drivers/pci/pci_tegra.c | 467 ++++++++++++++-----------------------------
include/configs/apalis_t30.h | 2 -
include/configs/beaver.h | 2 -
include/configs/cardhu.h | 2 -
include/configs/jetson-tk1.h | 2 -
include/configs/p2371-2180.h | 2 -
include/configs/trimslice.h | 2 -
include/fdtdec.h | 4 -
include/pci.h | 51 +++++
lib/fdtdec.c | 4 -
20 files changed, 319 insertions(+), 346 deletions(-)
--
2.6.0.rc2.230.g3dd15c0
^ permalink raw reply [flat|nested] 13+ messages in thread* [U-Boot] [PATCH v4 1/8] dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass @ 2015-11-14 4:19 ` Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 2/8] dm: pci: Avoid a driver model build error with CONFIG_CMD_PCI_ENUM Simon Glass ` (7 subsequent siblings) 8 siblings, 0 replies; 13+ messages in thread From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw) To: u-boot Move this option to Kconfig and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v4: - Fix Kconig typo in commit message Changes in v3: None Changes in v2: None configs/apalis_t30_defconfig | 1 + configs/beaver_defconfig | 1 + configs/cardhu_defconfig | 1 + configs/jetson-tk1_defconfig | 1 + configs/p2371-2180_defconfig | 1 + configs/trimslice_defconfig | 1 + drivers/pci/Kconfig | 10 ++++++++++ include/configs/apalis_t30.h | 1 - include/configs/beaver.h | 1 - include/configs/cardhu.h | 1 - include/configs/jetson-tk1.h | 1 - include/configs/p2371-2180.h | 1 - include/configs/trimslice.h | 1 - 13 files changed, 16 insertions(+), 6 deletions(-) diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 8971d29..871dc43 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="Apalis T30 # " # CONFIG_CMD_NFS is not set CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_PCI_TEGRA=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 4a6f6e4..dfc9adf 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="Tegra30 (Beaver) # " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y +CONFIG_PCI_TEGRA=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index 722bbeb..9e4a123 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y +CONFIG_PCI_TEGRA=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index 6df5c7e..7b1992b 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y +CONFIG_PCI_TEGRA=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index 8cd2fcc..4c37cdc 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -12,5 +12,6 @@ CONFIG_SYS_PROMPT="Tegra210 (P2371-2180) # " # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y CONFIG_TEGRA114_SPI=y +CONFIG_PCI_TEGRA=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index 18292e2..08e1b62 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y +CONFIG_PCI_TEGRA=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 167d405..c219c19 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -19,4 +19,14 @@ config PCI_SANDBOX the device tree but the normal PCI scan technique is used to find then. +config PCI_TEGRA + bool "Tegra PCI support" + depends on TEGRA + help + Enable support for the PCIe controller found on some generations of + Tegra. Tegra20 has 2 root ports with a total of 4 lanes, Tegra30 has + 3 root ports with a total of 6 lanes and Tegra124 has 2 root ports + with a total of 5 lanes. Some boards require this for Ethernet + support to work (e.g. beaver, jetson-tk1). + endmenu diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index fe1ef9d..7552a80 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -49,7 +49,6 @@ /* PCI host support */ #define CONFIG_PCI -#define CONFIG_PCI_TEGRA #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 1790f60..9e8dcf3f7 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -73,7 +73,6 @@ /* PCI host support */ #define CONFIG_PCI -#define CONFIG_PCI_TEGRA #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index ce6b158..174bb48 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -75,7 +75,6 @@ /* PCI host support */ #define CONFIG_PCI -#define CONFIG_PCI_TEGRA #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index f63957a..08cf563 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -59,7 +59,6 @@ /* PCI host support */ #define CONFIG_PCI -#define CONFIG_PCI_TEGRA #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 94f8085..56b169f 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -55,7 +55,6 @@ /* PCI host support */ #define CONFIG_PCI -#define CONFIG_PCI_TEGRA #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index 2ab5511..bdf1bd4 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -58,7 +58,6 @@ /* PCI host support */ #define CONFIG_PCI -#define CONFIG_PCI_TEGRA #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM -- 2.6.0.rc2.230.g3dd15c0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 2/8] dm: pci: Avoid a driver model build error with CONFIG_CMD_PCI_ENUM 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 1/8] dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig Simon Glass @ 2015-11-14 4:19 ` Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 3/8] dm: pci: Set up the SDRAM mapping correctly Simon Glass ` (6 subsequent siblings) 8 siblings, 0 replies; 13+ messages in thread From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw) To: u-boot This is not supported with driver model, so print a message instead of generating a build error. Rescanning PCI is not yet implemented. This function will be implemented later once some additional PCI driver model improvements are merged. It was confirmed on the mailing list that no one on the tegra side will miss this feature, so it is disabled for tegra. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v4: - Drop CONFIG_CMD_PCI_ENUM for p2371-2180 also Changes in v3: None Changes in v2: - Update commit message to explain that the feature is not important - Drop the feature from tegra boards common/cmd_pci.c | 4 ++++ include/configs/apalis_t30.h | 1 - include/configs/beaver.h | 1 - include/configs/cardhu.h | 1 - include/configs/jetson-tk1.h | 1 - include/configs/p2371-2180.h | 1 - include/configs/trimslice.h | 1 - 7 files changed, 4 insertions(+), 6 deletions(-) diff --git a/common/cmd_pci.c b/common/cmd_pci.c index dcecef8..69c5332 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -457,7 +457,11 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return pci_cfg_display(bdf, addr, size, value); #ifdef CONFIG_CMD_PCI_ENUM case 'e': +# ifdef CONFIG_DM_PCI + printf("This command is not yet supported with driver model\n"); +# else pci_init(); +# endif return 0; #endif case 'n': /* next */ diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index 7552a80..e1eb700 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -51,7 +51,6 @@ #define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM /* PCI networking support */ #define CONFIG_E1000_NO_NVM diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 9e8dcf3f7..a2c9622 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -75,7 +75,6 @@ #define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM /* PCI networking support */ #define CONFIG_RTL8169 diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 174bb48..0d857bb 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -77,7 +77,6 @@ #define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM /* PCI networking support */ #define CONFIG_RTL8169 diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index 08cf563..5da360f 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -61,7 +61,6 @@ #define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM /* PCI networking support */ #define CONFIG_RTL8169 diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 56b169f..6194c7e 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -57,7 +57,6 @@ #define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM /* PCI networking support */ #define CONFIG_RTL8169 diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index bdf1bd4..add5d40 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -60,7 +60,6 @@ #define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM /* PCI networking support */ #define CONFIG_RTL8169 -- 2.6.0.rc2.230.g3dd15c0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 3/8] dm: pci: Set up the SDRAM mapping correctly 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 1/8] dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 2/8] dm: pci: Avoid a driver model build error with CONFIG_CMD_PCI_ENUM Simon Glass @ 2015-11-14 4:19 ` Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 4/8] dm: pci: Support decoding ranges with duplicate entries Simon Glass ` (5 subsequent siblings) 8 siblings, 0 replies; 13+ messages in thread From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw) To: u-boot SDRAM doesn't always start at 0. Adjust the region mapping so that it works on platforms where SDRAM is somewhere else. This needs testing on other platforms. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v4: None Changes in v3: None Changes in v2: - Rename 'addr' to 'size' - Correct logic for use of gd->pci_ram_top drivers/pci/pci-uclass.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 1d93194..6d860c4 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -680,8 +680,8 @@ static int decode_regions(struct pci_controller *hose, const void *blob, int parent_node, int node) { int pci_addr_cells, addr_cells, size_cells; + phys_addr_t base = 0, size; int cells_per_record; - phys_addr_t addr; const u32 *prop; int len; int i; @@ -732,11 +732,14 @@ static int decode_regions(struct pci_controller *hose, const void *blob, } /* Add a region for our local memory */ - addr = gd->ram_size; - if (gd->pci_ram_top && gd->pci_ram_top < addr) - addr = gd->pci_ram_top; - pci_set_region(hose->regions + hose->region_count++, 0, 0, addr, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + size = gd->ram_size; +#ifdef CONFIG_SYS_SDRAM_BASE + base = CONFIG_SYS_SDRAM_BASE; +#endif + if (gd->pci_ram_top && gd->pci_ram_top < base + size) + size = gd->pci_ram_top - base; + pci_set_region(hose->regions + hose->region_count++, base, base, + size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); return 0; } -- 2.6.0.rc2.230.g3dd15c0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 4/8] dm: pci: Support decoding ranges with duplicate entries 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass ` (2 preceding siblings ...) 2015-11-14 4:19 ` [U-Boot] [PATCH v4 3/8] dm: pci: Set up the SDRAM mapping correctly Simon Glass @ 2015-11-14 4:19 ` Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 5/8] dm: pci: Add functions to emulate 8- and 16-bit access Simon Glass ` (4 subsequent siblings) 8 siblings, 0 replies; 13+ messages in thread From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw) To: u-boot At present we add a new resource entry for every range entry. But some range entries refer to configuration regions. To make this work, avoid adding two regions of the same type. The later ranges will overwrite the earlier (configuration) ones. There does not seem to be a way to distinguish the configuration ranges other than by ordering (as per the device tree binding). We could perhaps instead just store one region of each type in a simple array. Once we are sure that we don't need to support multiple regions, we could change this. It would be easier to do it when all drivers are converted to use driver model for PCI. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v4: None Changes in v3: None Changes in v2: - Update commit message to mention future work drivers/pci/pci-uclass.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 6d860c4..7b48879 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -704,6 +704,7 @@ static int decode_regions(struct pci_controller *hose, const void *blob, int space_code; u32 flags; int type; + int pos; if (len < cells_per_record) break; @@ -726,9 +727,15 @@ static int decode_regions(struct pci_controller *hose, const void *blob, } else { continue; } - debug(" - type=%d\n", type); - pci_set_region(hose->regions + hose->region_count++, pci_addr, - addr, size, type); + pos = -1; + for (i = 0; i < hose->region_count; i++) { + if (hose->regions[i].flags == type) + pos = i; + } + if (pos == -1) + pos = hose->region_count++; + debug(" - type=%d, pos=%d\n", type, pos); + pci_set_region(hose->regions + pos, pci_addr, addr, size, type); } /* Add a region for our local memory */ -- 2.6.0.rc2.230.g3dd15c0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 5/8] dm: pci: Add functions to emulate 8- and 16-bit access 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass ` (3 preceding siblings ...) 2015-11-14 4:19 ` [U-Boot] [PATCH v4 4/8] dm: pci: Support decoding ranges with duplicate entries Simon Glass @ 2015-11-14 4:19 ` Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 6/8] dm: pci: Add a function to get the controller for a bus Simon Glass ` (3 subsequent siblings) 8 siblings, 0 replies; 13+ messages in thread From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw) To: u-boot Provide a few functions to support using 32-bit access to emulate 8- and 16-bit access. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> --- Changes in v4: None Changes in v3: None Changes in v2: None drivers/pci/pci-uclass.c | 39 +++++++++++++++++++++++++++++++++++++++ include/pci.h | 31 +++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 7b48879..e38e0b2 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -927,6 +927,45 @@ int pci_find_first_device(struct udevice **devp) return skip_to_next_device(bus, devp); } +ulong pci_conv_32_to_size(ulong value, uint offset, enum pci_size_t size) +{ + switch (size) { + case PCI_SIZE_8: + return (value >> ((offset & 3) * 8)) & 0xff; + case PCI_SIZE_16: + return (value >> ((offset & 2) * 8)) & 0xffff; + default: + return value; + } +} + +ulong pci_conv_size_to_32(ulong old, ulong value, uint offset, + enum pci_size_t size) +{ + uint off_mask; + uint val_mask, shift; + ulong ldata, mask; + + switch (size) { + case PCI_SIZE_8: + off_mask = 3; + val_mask = 0xff; + break; + case PCI_SIZE_16: + off_mask = 2; + val_mask = 0xffff; + break; + default: + return value; + } + shift = (offset & off_mask) * 8; + ldata = (value & val_mask) << shift; + mask = val_mask << shift; + value = (old & ~mask) | ldata; + + return value; +} + UCLASS_DRIVER(pci) = { .id = UCLASS_PCI, .name = "pci", diff --git a/include/pci.h b/include/pci.h index ed135a5..ec2d104 100644 --- a/include/pci.h +++ b/include/pci.h @@ -1092,6 +1092,37 @@ static inline int pci_read_config_byte(pci_dev_t pcidev, int offset, } /** + * pci_conv_32_to_size() - convert a 32-bit read value to the given size + * + * Some PCI buses must always perform 32-bit reads. The data must then be + * shifted and masked to reflect the required access size and offset. This + * function performs this transformation. + * + * @value: Value to transform (32-bit value read from @offset & ~3) + * @offset: Register offset that was read + * @size: Required size of the result + * @return the value that would have been obtained if the read had been + * performed@the given offset with the correct size + */ +ulong pci_conv_32_to_size(ulong value, uint offset, enum pci_size_t size); + +/** + * pci_conv_size_to_32() - update a 32-bit value to prepare for a write + * + * Some PCI buses must always perform 32-bit writes. To emulate a smaller + * write the old 32-bit data must be read, updated with the required new data + * and written back as a 32-bit value. This function performs the + * transformation from the old value to the new value. + * + * @value: Value to transform (32-bit value read from @offset & ~3) + * @offset: Register offset that should be written + * @size: Required size of the write + * @return the value that should be written as a 32-bit access to @offset & ~3. + */ +ulong pci_conv_size_to_32(ulong old, ulong value, uint offset, + enum pci_size_t size); + +/** * struct dm_pci_emul_ops - PCI device emulator operations */ struct dm_pci_emul_ops { -- 2.6.0.rc2.230.g3dd15c0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 6/8] dm: pci: Add a function to get the controller for a bus 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass ` (4 preceding siblings ...) 2015-11-14 4:19 ` [U-Boot] [PATCH v4 5/8] dm: pci: Add functions to emulate 8- and 16-bit access Simon Glass @ 2015-11-14 4:19 ` Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 7/8] dm: pci: Add a function to find the regions for a PCI bus Simon Glass ` (2 subsequent siblings) 8 siblings, 0 replies; 13+ messages in thread From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw) To: u-boot A PCI bus may be a bridge device where the controller is the bridge's parent. Add a function to return the controller device, given a PCI device. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> --- Changes in v4: None Changes in v3: None Changes in v2: - Use the device_is_on_pci_bus() API drivers/pci/pci-uclass.c | 8 ++++++++ include/pci.h | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index e38e0b2..f3f5f00 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -53,6 +53,14 @@ struct pci_controller *pci_bus_to_hose(int busnum) return dev_get_uclass_priv(bus); } +struct udevice *pci_get_controller(struct udevice *dev) +{ + while (device_is_on_pci_bus(dev)) + dev = dev->parent; + + return dev; +} + pci_dev_t pci_get_bdf(struct udevice *dev) { struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); diff --git a/include/pci.h b/include/pci.h index ec2d104..f3dda70 100644 --- a/include/pci.h +++ b/include/pci.h @@ -1123,6 +1123,14 @@ ulong pci_conv_size_to_32(ulong old, ulong value, uint offset, enum pci_size_t size); /** + * pci_get_controller() - obtain the controller to use for a bus + * + * @dev: Device to check + * @return pointer to the controller device for this bus + */ +struct udevice *pci_get_controller(struct udevice *dev); + +/** * struct dm_pci_emul_ops - PCI device emulator operations */ struct dm_pci_emul_ops { -- 2.6.0.rc2.230.g3dd15c0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 7/8] dm: pci: Add a function to find the regions for a PCI bus 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass ` (5 preceding siblings ...) 2015-11-14 4:19 ` [U-Boot] [PATCH v4 6/8] dm: pci: Add a function to get the controller for a bus Simon Glass @ 2015-11-14 4:19 ` Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 8/8] dm: tegra: pci: Convert tegra boards to driver model for PCI Simon Glass 2015-11-16 19:12 ` [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Stephen Warren 8 siblings, 0 replies; 13+ messages in thread From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw) To: u-boot This function looks up the controller and returns a pointer to each region type. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> --- Changes in v4: None Changes in v3: None Changes in v2: None drivers/pci/pci-uclass.c | 30 ++++++++++++++++++++++++++++++ include/pci.h | 12 ++++++++++++ 2 files changed, 42 insertions(+) diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index f3f5f00..5fe3072 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -974,6 +974,36 @@ ulong pci_conv_size_to_32(ulong old, ulong value, uint offset, return value; } +int pci_get_regions(struct udevice *dev, struct pci_region **iop, + struct pci_region **memp, struct pci_region **prefp) +{ + struct udevice *bus = pci_get_controller(dev); + struct pci_controller *hose = dev_get_uclass_priv(bus); + int i; + + *iop = NULL; + *memp = NULL; + *prefp = NULL; + for (i = 0; i < hose->region_count; i++) { + switch (hose->regions[i].flags) { + case PCI_REGION_IO: + if (!*iop || (*iop)->size < hose->regions[i].size) + *iop = hose->regions + i; + break; + case PCI_REGION_MEM: + if (!*memp || (*memp)->size < hose->regions[i].size) + *memp = hose->regions + i; + break; + case (PCI_REGION_MEM | PCI_REGION_PREFETCH): + if (!*prefp || (*prefp)->size < hose->regions[i].size) + *prefp = hose->regions + i; + break; + } + } + + return (*iop != NULL) + (*memp != NULL) + (*prefp != NULL); +} + UCLASS_DRIVER(pci) = { .id = UCLASS_PCI, .name = "pci", diff --git a/include/pci.h b/include/pci.h index f3dda70..9c19482 100644 --- a/include/pci.h +++ b/include/pci.h @@ -1131,6 +1131,18 @@ ulong pci_conv_size_to_32(ulong old, ulong value, uint offset, struct udevice *pci_get_controller(struct udevice *dev); /** + * pci_get_regions() - obtain pointers to all the region types + * + * @dev: Device to check + * @iop: Returns a pointer to the I/O region, or NULL if none + * @memp: Returns a pointer to the memory region, or NULL if none + * @prefp: Returns a pointer to the pre-fetch region, or NULL if none + * @return the number of non-NULL regions returned, normally 3 + */ +int pci_get_regions(struct udevice *dev, struct pci_region **iop, + struct pci_region **memp, struct pci_region **prefp); + +/** * struct dm_pci_emul_ops - PCI device emulator operations */ struct dm_pci_emul_ops { -- 2.6.0.rc2.230.g3dd15c0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 8/8] dm: tegra: pci: Convert tegra boards to driver model for PCI 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass ` (6 preceding siblings ...) 2015-11-14 4:19 ` [U-Boot] [PATCH v4 7/8] dm: pci: Add a function to find the regions for a PCI bus Simon Glass @ 2015-11-14 4:19 ` Simon Glass 2015-11-16 23:13 ` Stephen Warren 2015-11-16 19:12 ` [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Stephen Warren 8 siblings, 1 reply; 13+ messages in thread From: Simon Glass @ 2015-11-14 4:19 UTC (permalink / raw) To: u-boot Adjust the Tegra PCI driver to support driver model and move all boards over at the same time. This can make use of some generic driver model code, such as the range-decoding logic. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v4: - Fix merge conflict resolution error in v3 - Add compatible string for T210 (from Stephen Warren) Changes in v3: - Rebase onto tegra/master - Enable DM_PCI for Tegra 210 family too Changes in v2: - Leave pci_skip_dev() at the bottom of the file to reduce the diff size arch/arm/mach-tegra/Kconfig | 2 + drivers/pci/pci_tegra.c | 467 ++++++++++++++------------------------------ include/fdtdec.h | 4 - lib/fdtdec.c | 4 - 4 files changed, 152 insertions(+), 325 deletions(-) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index a5b7e0d..e5215ab 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -12,6 +12,7 @@ config TEGRA_ARMV7_COMMON select DM_I2C select DM_SPI select DM_GPIO + select DM_PCI choice prompt "Tegra SoC select" @@ -43,6 +44,7 @@ config TEGRA210 select DM_I2C select DM_SPI select DM_GPIO + select DM_PCI endchoice diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c index 690896f..ed363e4 100644 --- a/drivers/pci/pci_tegra.c +++ b/drivers/pci/pci_tegra.c @@ -10,10 +10,10 @@ * SPDX-License-Identifier: GPL-2.0 */ -#define DEBUG #define pr_fmt(fmt) "tegra-pcie: " fmt #include <common.h> +#include <dm.h> #include <errno.h> #include <fdtdec.h> #include <malloc.h> @@ -177,7 +177,12 @@ DECLARE_GLOBAL_DATA_PTR; #define RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE 0x20000000 #define RP_LINK_CONTROL_STATUS_LINKSTAT_MASK 0x3fff0000 -struct tegra_pcie; +enum tegra_pci_id { + TEGRA20_PCIE, + TEGRA30_PCIE, + TEGRA124_PCIE, + TEGRA210_PCIE, +}; struct tegra_pcie_port { struct tegra_pcie *pcie; @@ -207,10 +212,6 @@ struct tegra_pcie { struct fdt_resource afi; struct fdt_resource cs; - struct fdt_resource prefetch; - struct fdt_resource mem; - struct fdt_resource io; - struct list_head ports; unsigned long xbar; @@ -218,11 +219,6 @@ struct tegra_pcie { struct tegra_xusb_phy *phy; }; -static inline struct tegra_pcie *to_tegra_pcie(struct pci_controller *hose) -{ - return container_of(hose, struct tegra_pcie, hose); -} - static void afi_writel(struct tegra_pcie *pcie, unsigned long value, unsigned long offset) { @@ -284,46 +280,54 @@ static int tegra_pcie_conf_address(struct tegra_pcie *pcie, pci_dev_t bdf, return 0; } - return -1; + return -EFAULT; } -static int tegra_pcie_read_conf(struct pci_controller *hose, pci_dev_t bdf, - int where, u32 *value) +static int pci_tegra_read_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) { - struct tegra_pcie *pcie = to_tegra_pcie(hose); - unsigned long address; + struct tegra_pcie *pcie = dev_get_priv(bus); + unsigned long address, value; int err; - err = tegra_pcie_conf_address(pcie, bdf, where, &address); + err = tegra_pcie_conf_address(pcie, bdf, offset, &address); if (err < 0) { - *value = 0xffffffff; - return 1; + value = 0xffffffff; + goto done; } - *value = readl(address); + value = readl(address); /* fixup root port class */ if (PCI_BUS(bdf) == 0) { - if (where == PCI_CLASS_REVISION) { - *value &= ~0x00ff0000; - *value |= PCI_CLASS_BRIDGE_PCI << 16; + if (offset == PCI_CLASS_REVISION) { + value &= ~0x00ff0000; + value |= PCI_CLASS_BRIDGE_PCI << 16; } } +done: + *valuep = pci_conv_32_to_size(value, offset, size); + return 0; } -static int tegra_pcie_write_conf(struct pci_controller *hose, pci_dev_t bdf, - int where, u32 value) +static int pci_tegra_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) { - struct tegra_pcie *pcie = to_tegra_pcie(hose); + struct tegra_pcie *pcie = dev_get_priv(bus); unsigned long address; + ulong old; int err; - err = tegra_pcie_conf_address(pcie, bdf, where, &address); + err = tegra_pcie_conf_address(pcie, bdf, offset, &address); if (err < 0) - return 1; + return 0; + old = readl(address); + value = pci_conv_size_to_32(old, value, offset, size); writel(value, address); return 0; @@ -348,12 +352,10 @@ static int tegra_pcie_port_parse_dt(const void *fdt, int node, } static int tegra_pcie_get_xbar_config(const void *fdt, int node, u32 lanes, - unsigned long *xbar) + enum tegra_pci_id id, unsigned long *xbar) { - enum fdt_compat_id id = fdtdec_lookup(fdt, node); - switch (id) { - case COMPAT_NVIDIA_TEGRA20_PCIE: + case TEGRA20_PCIE: switch (lanes) { case 0x00000004: debug("single-mode configuration\n"); @@ -366,8 +368,7 @@ static int tegra_pcie_get_xbar_config(const void *fdt, int node, u32 lanes, return 0; } break; - - case COMPAT_NVIDIA_TEGRA30_PCIE: + case TEGRA30_PCIE: switch (lanes) { case 0x00000204: debug("4x1, 2x1 configuration\n"); @@ -385,9 +386,8 @@ static int tegra_pcie_get_xbar_config(const void *fdt, int node, u32 lanes, return 0; } break; - - case COMPAT_NVIDIA_TEGRA124_PCIE: - case COMPAT_NVIDIA_TEGRA210_PCIE: + case TEGRA124_PCIE: + case TEGRA210_PCIE: switch (lanes) { case 0x0000104: debug("4x1, 1x1 configuration\n"); @@ -400,7 +400,6 @@ static int tegra_pcie_get_xbar_config(const void *fdt, int node, u32 lanes, return 0; } break; - default: break; } @@ -408,84 +407,6 @@ static int tegra_pcie_get_xbar_config(const void *fdt, int node, u32 lanes, return -FDT_ERR_NOTFOUND; } -static int tegra_pcie_parse_dt_ranges(const void *fdt, int node, - struct tegra_pcie *pcie) -{ - int parent, na_parent, na_pcie, ns_pcie; - const u32 *ptr, *end; - int len; - - parent = fdt_parent_offset(fdt, node); - if (parent < 0) { - error("Can't find PCI parent node\n"); - return -FDT_ERR_NOTFOUND; - } - - na_parent = fdt_address_cells(fdt, parent); - if (na_parent < 1) { - error("bad #address-cells for PCIE parent\n"); - return -FDT_ERR_NOTFOUND; - } - - na_pcie = fdt_address_cells(fdt, node); - if (na_pcie < 1) { - error("bad #address-cells for PCIE\n"); - return -FDT_ERR_NOTFOUND; - } - - ns_pcie = fdt_size_cells(fdt, node); - if (ns_pcie < 1) { - error("bad #size-cells for PCIE\n"); - return -FDT_ERR_NOTFOUND; - } - - ptr = fdt_getprop(fdt, node, "ranges", &len); - if (!ptr) { - error("missing \"ranges\" property"); - return -FDT_ERR_NOTFOUND; - } - - end = ptr + len / 4; - - while (ptr < end) { - struct fdt_resource *res = NULL; - u32 space = fdt32_to_cpu(*ptr); - - switch ((space >> 24) & 0x3) { - case 0x01: - res = &pcie->io; - break; - - case 0x02: /* 32 bit */ - case 0x03: /* 64 bit */ - if (space & (1 << 30)) - res = &pcie->prefetch; - else - res = &pcie->mem; - - break; - } - - if (res) { - int start_low = na_pcie + (na_parent - 1); - int size_low = na_pcie + na_parent + (ns_pcie - 1); - res->start = fdt32_to_cpu(ptr[start_low]); - res->end = res->start + fdt32_to_cpu(ptr[size_low]); - } - - ptr += na_pcie + na_parent + ns_pcie; - } - - debug("PCI regions:\n"); - debug(" I/O: %pa-%pa\n", &pcie->io.start, &pcie->io.end); - debug(" non-prefetchable memory: %pa-%pa\n", &pcie->mem.start, - &pcie->mem.end); - debug(" prefetchable memory: %pa-%pa\n", &pcie->prefetch.start, - &pcie->prefetch.end); - - return 0; -} - static int tegra_pcie_parse_port_info(const void *fdt, int node, unsigned int *index, unsigned int *lanes) @@ -512,7 +433,7 @@ static int tegra_pcie_parse_port_info(const void *fdt, int node, return 0; } -static int tegra_pcie_parse_dt(const void *fdt, int node, +static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id, struct tegra_pcie *pcie) { int err, subnode; @@ -548,12 +469,6 @@ static int tegra_pcie_parse_dt(const void *fdt, int node, } } - err = tegra_pcie_parse_dt_ranges(fdt, node, pcie); - if (err < 0) { - error("failed to parse \"ranges\" property"); - return err; - } - fdt_for_each_subnode(fdt, subnode, node) { unsigned int index = 0, num_lanes = 0; struct tegra_pcie_port *port; @@ -588,7 +503,7 @@ static int tegra_pcie_parse_dt(const void *fdt, int node, port->pcie = pcie; } - err = tegra_pcie_get_xbar_config(fdt, node, lanes, &pcie->xbar); + err = tegra_pcie_get_xbar_config(fdt, node, lanes, id, &pcie->xbar); if (err < 0) { error("invalid lane configuration"); return err; @@ -619,6 +534,8 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie) return err; } + tegra_pcie_board_init(); + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, PERIPH_ID_PCIE); if (err < 0) { @@ -788,9 +705,12 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie) return 0; } -static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) +static int tegra_pcie_setup_translations(struct udevice *bus) { + struct tegra_pcie *pcie = dev_get_priv(bus); unsigned long fpci, axi, size; + struct pci_region *io, *mem, *pref; + int count; /* BAR 0: type 1 extended configuration space */ fpci = 0xfe100000; @@ -801,28 +721,32 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) afi_writel(pcie, size >> 12, AFI_AXI_BAR0_SZ); afi_writel(pcie, fpci, AFI_FPCI_BAR0); + count = pci_get_regions(bus, &io, &mem, &pref); + if (count != 3) + return -EINVAL; + /* BAR 1: downstream I/O */ fpci = 0xfdfc0000; - size = fdt_resource_size(&pcie->io); - axi = pcie->io.start; + size = io->size; + axi = io->phys_start; afi_writel(pcie, axi, AFI_AXI_BAR1_START); afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ); afi_writel(pcie, fpci, AFI_FPCI_BAR1); /* BAR 2: prefetchable memory */ - fpci = (((pcie->prefetch.start >> 12) & 0x0fffffff) << 4) | 0x1; - size = fdt_resource_size(&pcie->prefetch); - axi = pcie->prefetch.start; + fpci = (((pref->phys_start >> 12) & 0x0fffffff) << 4) | 0x1; + size = pref->size; + axi = pref->phys_start; afi_writel(pcie, axi, AFI_AXI_BAR2_START); afi_writel(pcie, size >> 12, AFI_AXI_BAR2_SZ); afi_writel(pcie, fpci, AFI_FPCI_BAR2); /* BAR 3: non-prefetchable memory */ - fpci = (((pcie->mem.start >> 12) & 0x0fffffff) << 4) | 0x1; - size = fdt_resource_size(&pcie->mem); - axi = pcie->mem.start; + fpci = (((mem->phys_start >> 12) & 0x0fffffff) << 4) | 0x1; + size = mem->size; + axi = mem->phys_start; afi_writel(pcie, axi, AFI_AXI_BAR3_START); afi_writel(pcie, size >> 12, AFI_AXI_BAR3_SZ); @@ -848,6 +772,8 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) afi_writel(pcie, 0, AFI_MSI_BAR_SZ); afi_writel(pcie, 0, AFI_MSI_AXI_BAR_ST); afi_writel(pcie, 0, AFI_MSI_BAR_SZ); + + return 0; } static unsigned long tegra_pcie_port_get_pex_ctrl(struct tegra_pcie_port *port) @@ -1001,209 +927,116 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie) return 0; } -static const struct tegra_pcie_soc tegra20_pcie_soc = { - .num_ports = 2, - .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, - .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, - .has_pex_clkreq_en = false, - .has_pex_bias_ctrl = false, - .has_cml_clk = false, - .has_gen2 = false, - .force_pca_enable = false, -}; - -static const struct tegra_pcie_soc tegra30_pcie_soc = { - .num_ports = 3, - .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, - .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, - .has_pex_clkreq_en = true, - .has_pex_bias_ctrl = true, - .has_cml_clk = true, - .has_gen2 = false, - .force_pca_enable = false, -}; - -static const struct tegra_pcie_soc tegra124_pcie_soc = { - .num_ports = 2, - .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, - .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, - .has_pex_clkreq_en = true, - .has_pex_bias_ctrl = true, - .has_cml_clk = true, - .has_gen2 = true, - .force_pca_enable = false, -}; - -static const struct tegra_pcie_soc tegra210_pcie_soc = { - .num_ports = 2, - .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, - .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, - .has_pex_clkreq_en = true, - .has_pex_bias_ctrl = true, - .has_cml_clk = true, - .has_gen2 = true, - .force_pca_enable = true, +static const struct tegra_pcie_soc pci_tegra_soc[] = { + [TEGRA20_PCIE] = { + .num_ports = 2, + .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, + .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, + .has_pex_clkreq_en = false, + .has_pex_bias_ctrl = false, + .has_cml_clk = false, + .has_gen2 = false, + }, + [TEGRA30_PCIE] = { + .num_ports = 3, + .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, + .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, + .has_pex_clkreq_en = true, + .has_pex_bias_ctrl = true, + .has_cml_clk = true, + .has_gen2 = false, + }, + [TEGRA124_PCIE] = { + .num_ports = 2, + .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, + .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, + .has_pex_clkreq_en = true, + .has_pex_bias_ctrl = true, + .has_cml_clk = true, + .has_gen2 = true, + }, + [TEGRA210_PCIE] = { + .num_ports = 2, + .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, + .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, + .has_pex_clkreq_en = true, + .has_pex_bias_ctrl = true, + .has_cml_clk = true, + .has_gen2 = true, + .force_pca_enable = true, + } }; -static int process_nodes(const void *fdt, int nodes[], unsigned int count) +static int pci_tegra_ofdata_to_platdata(struct udevice *dev) { - unsigned int i; - uint64_t dram_end; - uint32_t pci_dram_size; - - /* Clip PCI-accessible DRAM to 32-bits */ - dram_end = ((uint64_t)NV_PA_SDRAM_BASE) + gd->ram_size; - if (dram_end > 0x100000000) - dram_end = 0x100000000; - pci_dram_size = dram_end - NV_PA_SDRAM_BASE; - - for (i = 0; i < count; i++) { - const struct tegra_pcie_soc *soc; - struct tegra_pcie *pcie; - enum fdt_compat_id id; - int err; - - if (!fdtdec_get_is_enabled(fdt, nodes[i])) - continue; - - id = fdtdec_lookup(fdt, nodes[i]); - switch (id) { - case COMPAT_NVIDIA_TEGRA20_PCIE: - soc = &tegra20_pcie_soc; - break; - - case COMPAT_NVIDIA_TEGRA30_PCIE: - soc = &tegra30_pcie_soc; - break; + struct tegra_pcie *pcie = dev_get_priv(dev); + enum tegra_pci_id id; - case COMPAT_NVIDIA_TEGRA124_PCIE: - soc = &tegra124_pcie_soc; - break; - - case COMPAT_NVIDIA_TEGRA210_PCIE: - soc = &tegra210_pcie_soc; - break; - - default: - error("unsupported compatible: %s", - fdtdec_get_compatible(id)); - continue; - } - - pcie = malloc(sizeof(*pcie)); - if (!pcie) { - error("failed to allocate controller"); - continue; - } + id = dev_get_driver_data(dev); + pcie->soc = &pci_tegra_soc[id]; - memset(pcie, 0, sizeof(*pcie)); - pcie->soc = soc; + INIT_LIST_HEAD(&pcie->ports); - INIT_LIST_HEAD(&pcie->ports); + if (tegra_pcie_parse_dt(gd->fdt_blob, dev->of_offset, id, pcie)) + return -EINVAL; - err = tegra_pcie_parse_dt(fdt, nodes[i], pcie); - if (err < 0) { - free(pcie); - continue; - } - - err = tegra_pcie_power_on(pcie); - if (err < 0) { - error("failed to power on"); - continue; - } - - err = tegra_pcie_enable_controller(pcie); - if (err < 0) { - error("failed to enable controller"); - continue; - } - - tegra_pcie_setup_translations(pcie); - - err = tegra_pcie_enable(pcie); - if (err < 0) { - error("failed to enable PCIe"); - continue; - } - - pcie->hose.first_busno = 0; - pcie->hose.current_busno = 0; - pcie->hose.last_busno = 0; - - pci_set_region(&pcie->hose.regions[0], NV_PA_SDRAM_BASE, - NV_PA_SDRAM_BASE, pci_dram_size, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - pci_set_region(&pcie->hose.regions[1], pcie->io.start, - pcie->io.start, fdt_resource_size(&pcie->io), - PCI_REGION_IO); - - pci_set_region(&pcie->hose.regions[2], pcie->mem.start, - pcie->mem.start, fdt_resource_size(&pcie->mem), - PCI_REGION_MEM); - - pci_set_region(&pcie->hose.regions[3], pcie->prefetch.start, - pcie->prefetch.start, - fdt_resource_size(&pcie->prefetch), - PCI_REGION_MEM | PCI_REGION_PREFETCH); + return 0; +} - pcie->hose.region_count = 4; +static int pci_tegra_probe(struct udevice *dev) +{ + struct tegra_pcie *pcie = dev_get_priv(dev); + int err; - pci_set_ops(&pcie->hose, - pci_hose_read_config_byte_via_dword, - pci_hose_read_config_word_via_dword, - tegra_pcie_read_conf, - pci_hose_write_config_byte_via_dword, - pci_hose_write_config_word_via_dword, - tegra_pcie_write_conf); + err = tegra_pcie_power_on(pcie); + if (err < 0) { + error("failed to power on"); + return err; + } - pci_register_hose(&pcie->hose); + err = tegra_pcie_enable_controller(pcie); + if (err < 0) { + error("failed to enable controller"); + return err; + } -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Enumerating devices...\n"); - printf("---------------------------------------\n"); - printf(" Device ID Description\n"); - printf(" ------ -- -----------\n"); -#endif + err = tegra_pcie_setup_translations(dev); + if (err < 0) { + error("failed to decode ranges"); + return err; + } - pcie->hose.last_busno = pci_hose_scan(&pcie->hose); + err = tegra_pcie_enable(pcie); + if (err < 0) { + error("failed to enable PCIe"); + return err; } return 0; } -void pci_init_board(void) -{ - const void *fdt = gd->fdt_blob; - int count, nodes[1]; +static const struct dm_pci_ops pci_tegra_ops = { + .read_config = pci_tegra_read_config, + .write_config = pci_tegra_write_config, +}; - tegra_pcie_board_init(); +static const struct udevice_id pci_tegra_ids[] = { + { .compatible = "nvidia,tegra20-pcie", .data = TEGRA20_PCIE }, + { .compatible = "nvidia,tegra30-pcie", .data = TEGRA30_PCIE }, + { .compatible = "nvidia,tegra124-pcie", .data = TEGRA124_PCIE }, + { .compatible = "nvidia,tegra210-pcie", .data = TEGRA210_PCIE }, + { } +}; - count = fdtdec_find_aliases_for_id(fdt, "pcie-controller", - COMPAT_NVIDIA_TEGRA210_PCIE, - nodes, ARRAY_SIZE(nodes)); - if (process_nodes(fdt, nodes, count)) - return; - - count = fdtdec_find_aliases_for_id(fdt, "pcie-controller", - COMPAT_NVIDIA_TEGRA124_PCIE, - nodes, ARRAY_SIZE(nodes)); - if (process_nodes(fdt, nodes, count)) - return; - - count = fdtdec_find_aliases_for_id(fdt, "pcie-controller", - COMPAT_NVIDIA_TEGRA30_PCIE, - nodes, ARRAY_SIZE(nodes)); - if (process_nodes(fdt, nodes, count)) - return; - - count = fdtdec_find_aliases_for_id(fdt, "pcie-controller", - COMPAT_NVIDIA_TEGRA20_PCIE, - nodes, ARRAY_SIZE(nodes)); - if (process_nodes(fdt, nodes, count)) - return; -} +U_BOOT_DRIVER(pci_tegra) = { + .name = "pci_tegra", + .id = UCLASS_PCI, + .of_match = pci_tegra_ids, + .ops = &pci_tegra_ops, + .ofdata_to_platdata = pci_tegra_ofdata_to_platdata, + .probe = pci_tegra_probe, + .priv_auto_alloc_size = sizeof(struct tegra_pcie), +}; int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) { diff --git a/include/fdtdec.h b/include/fdtdec.h index 3a6ff1f..8e0f592 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -129,10 +129,6 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */ COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */ - COMPAT_NVIDIA_TEGRA124_PCIE, /* Tegra 124 PCIe controller */ - COMPAT_NVIDIA_TEGRA210_PCIE, /* Tegra 210 PCIe controller */ - COMPAT_NVIDIA_TEGRA30_PCIE, /* Tegra 30 PCIe controller */ - COMPAT_NVIDIA_TEGRA20_PCIE, /* Tegra 20 PCIe controller */ COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL, /* Tegra124 XUSB pad controller */ COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL, diff --git a/lib/fdtdec.c b/lib/fdtdec.c index f1849bc..4534177 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -35,10 +35,6 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(NVIDIA_TEGRA124_SDMMC, "nvidia,tegra124-sdhci"), COMPAT(NVIDIA_TEGRA30_SDMMC, "nvidia,tegra30-sdhci"), COMPAT(NVIDIA_TEGRA20_SDMMC, "nvidia,tegra20-sdhci"), - COMPAT(NVIDIA_TEGRA124_PCIE, "nvidia,tegra124-pcie"), - COMPAT(NVIDIA_TEGRA210_PCIE, "nvidia,tegra210-pcie"), - COMPAT(NVIDIA_TEGRA30_PCIE, "nvidia,tegra30-pcie"), - COMPAT(NVIDIA_TEGRA20_PCIE, "nvidia,tegra20-pcie"), COMPAT(NVIDIA_TEGRA124_XUSB_PADCTL, "nvidia,tegra124-xusb-padctl"), COMPAT(NVIDIA_TEGRA210_XUSB_PADCTL, "nvidia,tegra210-xusb-padctl"), COMPAT(SMSC_LAN9215, "smsc,lan9215"), -- 2.6.0.rc2.230.g3dd15c0 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 8/8] dm: tegra: pci: Convert tegra boards to driver model for PCI 2015-11-14 4:19 ` [U-Boot] [PATCH v4 8/8] dm: tegra: pci: Convert tegra boards to driver model for PCI Simon Glass @ 2015-11-16 23:13 ` Stephen Warren 2015-11-16 23:20 ` Simon Glass 0 siblings, 1 reply; 13+ messages in thread From: Stephen Warren @ 2015-11-16 23:13 UTC (permalink / raw) To: u-boot On 11/13/2015 09:19 PM, Simon Glass wrote: > Adjust the Tegra PCI driver to support driver model and move all boards over > at the same time. This can make use of some generic driver model code, such > as the range-decoding logic. To make this series work on Jetson TX1, two things need to happen. First, this patch reverts a change I made earlier to move the call to tegra_pcie_board_init() to an earlier point in the initialization process, i.e. before /any/ part of the PCIe or pad HW is accessed. To solve that, apply the following: > diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c > index ed363e4220c4..8f089b3f6bbe 100644 > --- a/drivers/pci/pci_tegra.c > +++ b/drivers/pci/pci_tegra.c > @@ -433,6 +435,11 @@ static int tegra_pcie_parse_port_info(const void *fdt, int node, > return 0; > } > > +int __weak tegra_pcie_board_init(void) > +{ > + return 0; > +} > + > static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id, > struct tegra_pcie *pcie) > { > @@ -460,6 +467,8 @@ static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id, > return err; > } > > + tegra_pcie_board_init(); > + > pcie->phy = tegra_xusb_phy_get(TEGRA_XUSB_PADCTL_PCIE); > if (pcie->phy) { > err = tegra_xusb_phy_prepare(pcie->phy); > @@ -512,11 +521,6 @@ static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id, > return 0; > } > > -int __weak tegra_pcie_board_init(void) > -{ > - return 0; > -} > - > static int tegra_pcie_power_on(struct tegra_pcie *pcie) > { > const struct tegra_pcie_soc *soc = pcie->soc; > @@ -534,8 +538,6 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie) > return err; > } > > - tegra_pcie_board_init(); > - > err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, > PERIPH_ID_PCIE); > if (err < 0) { Second, the removal of the following piece of code: > diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c > -static int process_nodes(const void *fdt, int nodes[], unsigned int count) > { > - unsigned int i; > - uint64_t dram_end; > - uint32_t pci_dram_size; > - > - /* Clip PCI-accessible DRAM to 32-bits */ > - dram_end = ((uint64_t)NV_PA_SDRAM_BASE) + gd->ram_size; > - if (dram_end > 0x100000000) > - dram_end = 0x100000000; > - pci_dram_size = dram_end - NV_PA_SDRAM_BASE; ... means that the PCI resource structure that represents system memory ends up with size=0 rather than the expected size=0x80000000. That's because gd->ram_size is 4GB and sizeof(res->size)==4. Perhaps I could solve this by defining CONFIG_SYS_PCI_64BIT, which changes the size of res->size to 8 bytes. However: a) I'm a bit worried that changing the size of that type will lead to other unexpected behavioural changes, e.g. interactions with DT parsing due to cell count differences. b) This only solves the integer overflow issue. In fact, res->base+res->size should fit inside 32-bits since IIRC the PCIe controller can only access 32-bit addresses, and hence we need to clip the RAM size to acknowledge that, which the code above was doing. Doing such a clipping operation in the generic/shared decode_regions() doesn't feel like a good idea, at least not unconditionally. In practice, (a) doesn't seem to be a problem, and perhaps we can ignore (b), since board_get_usable_ram_top() (in arch/arm/mach-tegra/board2.c) limits usable RAM size to fit within 32 bits for similar reasons. So, I know that no allocated memory buffer will ever be above 32 bits, so it doesn't matter in practice whether a PCI region's base+size fits into 32 bits or not. What are your thoughts on this? BTW, your V4 plus these fixes is available at: git://github.com/swarren/u-boot.git test-pci-dm-v4 ^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 8/8] dm: tegra: pci: Convert tegra boards to driver model for PCI 2015-11-16 23:13 ` Stephen Warren @ 2015-11-16 23:20 ` Simon Glass 2015-11-16 23:27 ` Stephen Warren 0 siblings, 1 reply; 13+ messages in thread From: Simon Glass @ 2015-11-16 23:20 UTC (permalink / raw) To: u-boot Hi Stephen, On 16 November 2015 at 16:13, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 11/13/2015 09:19 PM, Simon Glass wrote: >> >> Adjust the Tegra PCI driver to support driver model and move all boards >> over >> at the same time. This can make use of some generic driver model code, >> such >> as the range-decoding logic. > Thanks for looking at this. > > To make this series work on Jetson TX1, two things need to happen. > > First, this patch reverts a change I made earlier to move the call to > tegra_pcie_board_init() to an earlier point in the initialization process, > i.e. before /any/ part of the PCIe or pad HW is accessed. To solve that, > apply the following: > >> diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c >> index ed363e4220c4..8f089b3f6bbe 100644 >> --- a/drivers/pci/pci_tegra.c >> +++ b/drivers/pci/pci_tegra.c >> @@ -433,6 +435,11 @@ static int tegra_pcie_parse_port_info(const void >> *fdt, int node, >> return 0; >> } >> >> +int __weak tegra_pcie_board_init(void) >> +{ >> + return 0; >> +} >> + >> static int tegra_pcie_parse_dt(const void *fdt, int node, enum >> tegra_pci_id id, >> struct tegra_pcie *pcie) >> { >> @@ -460,6 +467,8 @@ static int tegra_pcie_parse_dt(const void *fdt, int >> node, enum tegra_pci_id id, >> return err; >> } >> >> + tegra_pcie_board_init(); >> + >> pcie->phy = tegra_xusb_phy_get(TEGRA_XUSB_PADCTL_PCIE); >> if (pcie->phy) { >> err = tegra_xusb_phy_prepare(pcie->phy); >> @@ -512,11 +521,6 @@ static int tegra_pcie_parse_dt(const void *fdt, int >> node, enum tegra_pci_id id, >> return 0; >> } >> >> -int __weak tegra_pcie_board_init(void) >> -{ >> - return 0; >> -} >> - >> static int tegra_pcie_power_on(struct tegra_pcie *pcie) >> { >> const struct tegra_pcie_soc *soc = pcie->soc; >> @@ -534,8 +538,6 @@ static int tegra_pcie_power_on(struct tegra_pcie >> *pcie) >> return err; >> } >> >> - tegra_pcie_board_init(); >> - >> err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, >> PERIPH_ID_PCIE); >> if (err < 0) { > OK > > Second, the removal of the following piece of code: > >> diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c > > >> -static int process_nodes(const void *fdt, int nodes[], unsigned int >> count) >> { >> - unsigned int i; >> - uint64_t dram_end; >> - uint32_t pci_dram_size; >> - >> - /* Clip PCI-accessible DRAM to 32-bits */ >> - dram_end = ((uint64_t)NV_PA_SDRAM_BASE) + gd->ram_size; >> - if (dram_end > 0x100000000) >> - dram_end = 0x100000000; >> - pci_dram_size = dram_end - NV_PA_SDRAM_BASE; > > > ... means that the PCI resource structure that represents system memory ends > up with size=0 rather than the expected size=0x80000000. That's because > gd->ram_size is 4GB and sizeof(res->size)==4. > > Perhaps I could solve this by defining CONFIG_SYS_PCI_64BIT, which changes > the size of res->size to 8 bytes. However: > > a) I'm a bit worried that changing the size of that type will lead to other > unexpected behavioural changes, e.g. interactions with DT parsing due to > cell count differences. > > b) This only solves the integer overflow issue. In fact, res->base+res->size > should fit inside 32-bits since IIRC the PCIe controller can only access > 32-bit addresses, and hence we need to clip the RAM size to acknowledge > that, which the code above was doing. Doing such a clipping operation in the > generic/shared decode_regions() doesn't feel like a good idea, at least not > unconditionally. > > In practice, (a) doesn't seem to be a problem, and perhaps we can ignore > (b), since board_get_usable_ram_top() (in arch/arm/mach-tegra/board2.c) > limits usable RAM size to fit within 32 bits for similar reasons. So, I know > that no allocated memory buffer will ever be above 32 bits, so it doesn't > matter in practice whether a PCI region's base+size fits into 32 bits or > not. > > What are your thoughts on this? Does gd->pci_ram_top in decode_regions() do what you want? > > BTW, your V4 plus these fixes is available at: > > git://github.com/swarren/u-boot.git test-pci-dm-v4 Thanks! Regards, Simon ^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 8/8] dm: tegra: pci: Convert tegra boards to driver model for PCI 2015-11-16 23:20 ` Simon Glass @ 2015-11-16 23:27 ` Stephen Warren 0 siblings, 0 replies; 13+ messages in thread From: Stephen Warren @ 2015-11-16 23:27 UTC (permalink / raw) To: u-boot On 11/16/2015 04:20 PM, Simon Glass wrote: > On 16 November 2015 at 16:13, Stephen Warren <swarren@wwwdotorg.org> wrote: >> On 11/13/2015 09:19 PM, Simon Glass wrote: >>> Adjust the Tegra PCI driver to support driver model and move all boards over >>> at the same time. This can make use of some generic driver model code, such >>> as the range-decoding logic. > > Thanks for looking at this. > >> To make this series work on Jetson TX1, two things need to happen. ... >>> diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c >> >>> -static int process_nodes(const void *fdt, int nodes[], unsigned int >>> count) >>> { >>> - unsigned int i; >>> - uint64_t dram_end; >>> - uint32_t pci_dram_size; >>> - >>> - /* Clip PCI-accessible DRAM to 32-bits */ >>> - dram_end = ((uint64_t)NV_PA_SDRAM_BASE) + gd->ram_size; >>> - if (dram_end > 0x100000000) >>> - dram_end = 0x100000000; >>> - pci_dram_size = dram_end - NV_PA_SDRAM_BASE; >> >> >> ... means that the PCI resource structure that represents system memory ends >> up with size=0 rather than the expected size=0x80000000. That's because >> gd->ram_size is 4GB and sizeof(res->size)==4. >> >> Perhaps I could solve this by defining CONFIG_SYS_PCI_64BIT, which changes >> the size of res->size to 8 bytes. However: >> >> a) I'm a bit worried that changing the size of that type will lead to other >> unexpected behavioural changes, e.g. interactions with DT parsing due to >> cell count differences. >> >> b) This only solves the integer overflow issue. In fact, res->base+res->size >> should fit inside 32-bits since IIRC the PCIe controller can only access >> 32-bit addresses, and hence we need to clip the RAM size to acknowledge >> that, which the code above was doing. Doing such a clipping operation in the >> generic/shared decode_regions() doesn't feel like a good idea, at least not >> unconditionally. >> >> In practice, (a) doesn't seem to be a problem, and perhaps we can ignore >> (b), since board_get_usable_ram_top() (in arch/arm/mach-tegra/board2.c) >> limits usable RAM size to fit within 32 bits for similar reasons. So, I know >> that no allocated memory buffer will ever be above 32 bits, so it doesn't >> matter in practice whether a PCI region's base+size fits into 32 bits or >> not. >> >> What are your thoughts on this? > > Does gd->pci_ram_top in decode_regions() do what you want? Ah of course; the following does solve the problem: > diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c > index 8ba143d996ca..d2c957a2a426 100644 > --- a/arch/arm/mach-tegra/board2.c > +++ b/arch/arm/mach-tegra/board2.c > @@ -377,6 +377,8 @@ void dram_init_banksize(void) > gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; > gd->bd->bi_dram[0].size = usable_ram_size_below_4g(); > > + gd->pci_ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; > + > #ifdef CONFIG_PHYS_64BIT > if (gd->ram_size > SZ_2G) { > gd->bd->bi_dram[1].start = 0x100000000; ^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass ` (7 preceding siblings ...) 2015-11-14 4:19 ` [U-Boot] [PATCH v4 8/8] dm: tegra: pci: Convert tegra boards to driver model for PCI Simon Glass @ 2015-11-16 19:12 ` Stephen Warren 8 siblings, 0 replies; 13+ messages in thread From: Stephen Warren @ 2015-11-16 19:12 UTC (permalink / raw) To: u-boot On 11/13/2015 09:19 PM, Simon Glass wrote: > This series converts all Tegra boards to use driver model for PCI. The net > effect should be no change in functionality. In v4, Jetson TK1 now works as expected. However, the issues on p2371-2180 (Jetson TX1) still remain. I'll try and look into these. ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2015-11-16 23:27 UTC | newest] Thread overview: 13+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-11-14 4:19 [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 1/8] dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 2/8] dm: pci: Avoid a driver model build error with CONFIG_CMD_PCI_ENUM Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 3/8] dm: pci: Set up the SDRAM mapping correctly Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 4/8] dm: pci: Support decoding ranges with duplicate entries Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 5/8] dm: pci: Add functions to emulate 8- and 16-bit access Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 6/8] dm: pci: Add a function to get the controller for a bus Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 7/8] dm: pci: Add a function to find the regions for a PCI bus Simon Glass 2015-11-14 4:19 ` [U-Boot] [PATCH v4 8/8] dm: tegra: pci: Convert tegra boards to driver model for PCI Simon Glass 2015-11-16 23:13 ` Stephen Warren 2015-11-16 23:20 ` Simon Glass 2015-11-16 23:27 ` Stephen Warren 2015-11-16 19:12 ` [U-Boot] [PATCH v4 0/8] dm: pci: tegra: Convert Tegra PCI to driver model Stephen Warren
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.