Re: [PATCH v2] arm, am335x: add support for the bosch shc board

[Dave Gerlach <d-gerlach-l0cyMroinI0@public.gmane.org>]

Hi,
On 11/17/2015 02:24 AM, Heiko Schocher wrote:
> add support for the am335x based shc board.
>
> UART: 0-2 and 4
> DRAM: 512 MiB
> MMC:  OMAP SD/MMC: 0 @ 26 MHz
>        OMAP SD/MMC: 1 @ 26 MHz
> I2C:  at24 eeprom, pcf8563
> USB:  USB1 (host)
>
> Signed-off-by: Heiko Schocher <hs-ynQEQJNshbs@public.gmane.org>
> ---
> The following patches are needed to get all working
> for the shc board:
> - disable clkout on pcf8563
>    accepted.
>    http://www.spinics.net/lists/devicetree/msg98542.html
>
> - leds: leds-gpio: add shutdown function
>    accepted.
>    https://lkml.org/lkml/2015/10/13/169
>
> - net: phy: smsc: disable energy detect mode
>    accepted
>    [PATCH v2 2/2] net: phy: smsc: disable energy detect mode
>    https://lkml.org/lkml/2015/10/17/2
>    [PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing
>    https://lkml.org/lkml/2015/10/17/4
>
> - ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
>    http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328204.html
>    @Dave: What is the current state of this patch?
>    I have the same problem here on this am335x based board
>

A different approach is being taken for resolving the issue of rtc hwmod 
on am43x epos evm [1], which is what I was attempting to solve with the 
patch you have linked. We decided to avoid changing omap_hwmod code and 
I haven't been pursuing the ti,no-init flag anymore.

Regards,
Dave

[1] http://www.spinics.net/lists/linux-omap/msg121987.html

> - [PATCH v2] regulator: tps65217: remove tps65217.dtsi file
>    http://www.kernelhub.org/?msg=868907&p=2
>
> - bootlog and automated tests:
>    http://xeidos.ddns.net/buildbot/waterfall
>
> Changes in v2:
> - Use IOPAD pinmux macro as Robert Nelson
>    suggested.
>
>   arch/arm/boot/dts/Makefile       |   3 +-
>   arch/arm/boot/dts/am335x-shc.dts | 577 +++++++++++++++++++++++++++++++++++++++
>   2 files changed, 579 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/boot/dts/am335x-shc.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 30bbc37..65d750f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -466,7 +466,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \
>   	am335x-pepper.dtb \
>   	am335x-lxm.dtb \
>   	am335x-chiliboard.dtb \
> -	am335x-wega-rdk.dtb
> +	am335x-wega-rdk.dtb \
> +	am335x-shc.dtb
>   dtb-$(CONFIG_ARCH_OMAP4) += \
>   	omap4-duovero-parlor.dtb \
>   	omap4-panda.dtb \
> diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
> new file mode 100644
> index 0000000..1b5b044
> --- /dev/null
> +++ b/arch/arm/boot/dts/am335x-shc.dts
> @@ -0,0 +1,577 @@
> +/*
> + * support for the bosch am335x based shc c3 board
> + *
> + * Copyright, C) 2015 Heiko Schocher <hs-ynQEQJNshbs@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +#include "am33xx.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "Bosch SHC";
> +	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
> +
> +	aliases {
> +		mmcblk0 = &mmc1;
> +		mmcblk1 = &mmc2;
> +	};
> +
> +	cpus {
> +		cpu@0 {
> +			/*
> +			 * To consider voltage drop between PMIC and SoC,
> +			 * tolerance value is reduced to 2% from 4% and
> +			 * voltage value is increased as a precaution.
> +			 */
> +			operating-points = <
> +				/* kHz    uV */
> +				594000  1225000
> +				294000  1125000
> +			>;
> +			voltage-tolerance = <2>; /* 2 percentage */
> +			cpu0-supply = <&dcdc2_reg>;
> +		};
> +	};
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +
> +		back_button {
> +			label = "Back Button";
> +			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
> +			linux,code = <KEY_BACK>;
> +			debounce-interval = <1000>;
> +			gpio-key,wakeup;
> +		};
> +
> +		front_button {
> +			label = "Front Button";
> +			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
> +			linux,code = <KEY_FRONT>;
> +			debounce-interval = <1000>;
> +			gpio-key,wakeup;
> +		};
> +	};
> +
> +	leds {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&user_leds_s0>;
> +
> +		compatible = "gpio-leds";
> +
> +		led@1 {
> +			label = "shc:power:red";
> +			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led@2 {
> +			label = "shc:power:bl";
> +			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "timer";
> +			default-state = "on";
> +		};
> +
> +		led@3 {
> +			label = "shc:lan:red";
> +			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led@4 {
> +			label = "shc:lan:bl";
> +			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led@5 {
> +			label = "shc:cloud:red";
> +			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led@6 {
> +			label = "shc:cloud:bl";
> +			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>; /* 512 MB */
> +	};
> +
> +	vmmcsd_fixed: fixedregulator@0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vmmcsd_fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&aes {
> +	status = "okay";
> +};
> +
> +&cppi41dma  {
> +	status = "okay";
> +};
> +
> +&davinci_mdio {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&davinci_mdio_default>;
> +	pinctrl-1 = <&davinci_mdio_sleep>;
> +	status = "okay";
> +
> +	ethernetphy0: ethernet-phy@0 {
> +		reg = <0>;
> +		smsc,disable-energy-detect;
> +	};
> +};
> +
> +&epwmss1 {
> +	status = "okay";
> +
> +	ehrpwm1: ehrpwm@48302200 {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ehrpwm1_pins>;
> +		status = "okay";
> +	};
> +};
> +
> +&gpio1 {
> +	hmtc_rst {
> +		gpio-hog;
> +		gpios = <24 GPIO_ACTIVE_LOW>;
> +		output-high;
> +		line-name = "homematic_reset";
> +	};
> +
> +	hmtc_prog {
> +		gpio-hog;
> +		gpios = <27 GPIO_ACTIVE_LOW>;
> +		output-high;
> +		line-name = "homematic_program";
> +	};
> +};
> +
> +&gpio3 {
> +	zgb_rst {
> +		gpio-hog;
> +		gpios = <18 GPIO_ACTIVE_LOW>;
> +		output-low;
> +		line-name = "zigbee_reset";
> +	};
> +
> +	zgb_boot {
> +		gpio-hog;
> +		gpios = <19 GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "zigbee_boot";
> +	};
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins>;
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	tps: tps@24 {
> +		reg = <0x24>;
> +	};
> +
> +	at24@50 {
> +		compatible = "at24,24c32";
> +		pagesize = <32>;
> +		reg = <0x50>;
> +	};
> +
> +	pcf8563@51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};
> +};
> +
> +&mac {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&cpsw_default>;
> +	pinctrl-1 = <&cpsw_sleep>;
> +	status = "okay";
> +	slaves = <1>;
> +	cpsw_emac0: slave@4a100200  {
> +		phy_id = <&davinci_mdio>, <0>;
> +		phy-mode = "mii";
> +		phy-handle = <&ethernetphy0>;
> +	};
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins>;
> +	bus-width = <0x4>;
> +	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
> +	cd-inverted;
> +	max-frequency = <26000000>;
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	status = "okay";
> +};
> +
> +&mmc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emmc_pins>;
> +	bus-width = <8>;
> +	max-frequency = <26000000>;
> +	sd-uhs-sdr25;
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	status = "okay";
> +};
> +
> +&mmc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc3_pins>;
> +	bus-width = <4>;
> +	cap-power-off-card;
> +	max-frequency = <26000000>;
> +	sd-uhs-sdr25;
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	status = "okay";
> +};
> +
> +&rtc {
> +	ti,no-init;
> +};
> +
> +&sham {
> +	status = "okay";
> +};
> +
> +&tps {
> +	compatible = "ti,tps65217";
> +	ti,pmic-shutdown-controller;
> +
> +	regulators {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		dcdc1_reg: regulator@0 {
> +			reg = <0>;
> +			regulator-name = "vdds_dpr";
> +			regulator-compatible = "dcdc1";
> +			regulator-min-microvolt = <1300000>;
> +			regulator-max-microvolt = <1450000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		dcdc2_reg: regulator@1 {
> +			reg = <1>;
> +			/*
> +			 * VDD_MPU voltage limits 0.95V - 1.26V with
> +			 * +/-4% tolerance
> +			 */
> +			regulator-compatible = "dcdc2";
> +			regulator-name = "vdd_mpu";
> +			regulator-min-microvolt = <925000>;
> +			regulator-max-microvolt = <1375000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +			regulator-ramp-delay = <70000>;
> +		};
> +
> +		dcdc3_reg: regulator@2 {
> +			reg = <2>;
> +			/*
> +			 * VDD_CORE voltage limits 0.95V - 1.1V with
> +			 * +/-4% tolerance
> +			 */
> +			regulator-name = "vdd_core";
> +			regulator-compatible = "dcdc3";
> +			regulator-min-microvolt = <925000>;
> +			regulator-max-microvolt = <1125000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		ldo1_reg: regulator@3 {
> +			reg = <3>;
> +			regulator-name = "vio,vrtc,vdds";
> +			regulator-compatible = "ldo1";
> +			regulator-min-microvolt = <1000000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-always-on;
> +		};
> +
> +		ldo2_reg: regulator@4 {
> +			reg = <4>;
> +			regulator-name = "vdd_3v3aux";
> +			regulator-compatible = "ldo2";
> +			regulator-min-microvolt = <900000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		ldo3_reg: regulator@5 {
> +			reg = <5>;
> +			regulator-name = "vdd_1v8";
> +			regulator-compatible = "ldo3";
> +			regulator-min-microvolt = <900000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-always-on;
> +		};
> +
> +		ldo4_reg: regulator@6 {
> +			reg = <6>;
> +			regulator-name = "vdd_3v3a";
> +			regulator-compatible = "ldo4";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart1_pins>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2_pins>;
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart4_pins>;
> +	status = "okay";
> +};
> +
> +&usb {
> +	status = "okay";
> +};
> +
> +&usb_ctrl_mod {
> +	status = "okay";
> +};
> +
> +&usb1_phy {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +&am33xx_pinmux {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&clkout2_pin>;
> +
> +	clkout2_pin: pinmux_clkout2_pin {
> +		pinctrl-single,pins = <
> +			/* xdma_event_intr1.clkout2 */
> +			AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
> +		>;
> +	};
> +
> +	cpsw_default: cpsw_default {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
> +			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +		>;
> +	};
> +
> +	cpsw_sleep: cpsw_sleep {
> +		pinctrl-single,pins = <
> +			/* Slave 1 reset value */
> +			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +		>;
> +	};
> +
> +	davinci_mdio_default: davinci_mdio_default {
> +		pinctrl-single,pins = <
> +			/* mdio_data.mdio_data */
> +			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
> +			/* mdio_clk.mdio_clk */
> +			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
> +		>;
> +	};
> +
> +	davinci_mdio_sleep: davinci_mdio_sleep {
> +		pinctrl-single,pins = <
> +			/* MDIO reset value */
> +			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +		>;
> +	};
> +
> +	ehrpwm1_pins: pinmux_ehrpwm1 {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
> +		>;
> +	};
> +
> +	emmc_pins: pinmux_emmc_pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
> +			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
> +			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
> +			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
> +			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
> +			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
> +			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
> +			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
> +			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
> +			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
> +		>;
> +	};
> +
> +	i2c0_pins: pinmux_i2c0_pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
> +			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
> +		>;
> +	};
> +
> +	mmc1_pins: pinmux_mmc1_pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
> +		>;
> +	};
> +
> +	mmc3_pins: pinmux_mmc3_pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
> +			AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
> +			AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
> +			AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
> +			AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
> +			AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
> +		>;
> +	};
> +
> +	uart0_pins: pinmux_uart0_pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
> +			AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
> +		>;
> +	};
> +
> +	uart1_pins: pinmux_uart1 {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
> +			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
> +			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
> +		>;
> +	};
> +
> +	uart2_pins: pinmux_uart2_pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
> +			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
> +		>;
> +	};
> +
> +	uart4_pins: pinmux_uart4_pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
> +			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
> +		>;
> +	};
> +
> +	user_leds_s0: user_leds_s0 {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
> +			AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
> +			AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
> +			AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
> +			AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
> +		>;
> +	};
> +};
>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html