[U-Boot] [GIT PULL] Zynq changes

[Michal Simek <monstr@monstr.eu>]

Hi Tom,

please pull these changes to your tree. Network patches have been Ack by
Joe. mkimage, mii patches were reviewed by you.

There is one problem with U-Boot SPL for Zynq because one patch break it
(not compilation)
"board_init: Change the logic to setup malloc_base"
(sha1: 9ac4fc82071ce346e3885118242ff45d22f69b82)

There is also one compilation warning from gem driver. I will send the
patch to fix it.

Thanks,
Michal



The following changes since commit 736d1746fb7b8f7cd70657a4a72db2b6bd8de40e:

  itest: add missing break statements to evalexp() (2015-11-18 15:29:00
-0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to bdaeb8f23c6d5d11829072baaf0c0fe37c09f26a:

  common: mii: Do not allow to exceed max phy limit (2015-11-19 14:03:05
+0100)

----------------------------------------------------------------
Edgar E. Iglesias (2):
      net: phy: Add support for Texas Instruments DP83867
      net: zynq: Disable secondary queues

Michal Simek (17):
      zynqmp: mp: Add support for booting R5 from any address
      ARM: zynq: Choose boot image based on OF_SEPARATE macro
      ARM64: zynqmp: Enable TI phy by default
      net: zynq: Add debug message to phyread/phywrite
      net: zynq: Add support for different PHY interface types
      net: zynq: Extend register description with offsets
      net: zynq: Fix clearing statistic
      net: zynq: Allocate BD_SPACE in connection to RX_BUF
      net: zynq: Setup BD when structures are filled
      net: zynq: Do not report TX underrun
      net: zynq: Add dummy packet to fix packet duplication issue
      net: zynq: Wait till packet is sent
      net: zynq: Fix mdc clock division setting for 100Mbit/s
      net: zynq: Remove unused MDCCLKDIV2 macro
      net: zynq: Fix MDC setting for zynq
      zynq: sdhci: Define max clock by macro
      common: mii: Do not allow to exceed max phy limit

Nathan Rossi (2):
      tools: zynqimage: Add Xilinx Zynq boot header generation to mkimage
      ARM: zynq: Add target for building bootable SPL image for Zynq

 Makefile                           |   3 +++
 arch/arm/cpu/armv8/zynqmp/mp.c     |  38 ++++++++++++++++++++++++++---
 common/cmd_mii.c                   |   5 ++++
 common/image.c                     |   1 +
 drivers/mmc/zynq_sdhci.c           |   2 +-
 drivers/net/phy/Makefile           |   1 +
 drivers/net/phy/phy.c              |   3 +++
 drivers/net/phy/ti.c               | 200
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/zynq_gem.c             | 143
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------
 include/configs/xilinx_zynqmp.h    |   4 +++
 include/configs/xilinx_zynqmp_ep.h |   1 +
 include/configs/zynq-common.h      |   3 ++-
 include/image.h                    |   3 ++-
 include/phy.h                      |   1 +
 scripts/Makefile.spl               |  11 +++++++++
 tools/Makefile                     |   1 +
 tools/zynqimage.c                  | 257
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 17 files changed, 638 insertions(+), 39 deletions(-)
 create mode 100644 drivers/net/phy/ti.c
 create mode 100644 tools/zynqimage.c



-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151119/cc5892f4/attachment.sig>