All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Leilk Liu <leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v2] spi: mediatek: revise mtk_spi_probe() failure flow
Date: Tue, 24 Nov 2015 19:12:42 +0100	[thread overview]
Message-ID: <5654A89A.3090202@gmail.com> (raw)
In-Reply-To: <1448332712-29039-1-git-send-email-leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>



On 24/11/15 03:38, Leilk Liu wrote:
> This patch revises failure flow while pm_runtime_enable().

Please write a proper commit message explaining what this patch does.

>
> Signed-off-by: Leilk Liu <leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
>   drivers/spi/spi-mt65xx.c |   15 ++++++++-------
>   1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
> index 6c1a96e..00a36da 100644
> --- a/drivers/spi/spi-mt65xx.c
> +++ b/drivers/spi/spi-mt65xx.c
> @@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   	ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
>   	if (ret < 0) {
>   		dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret);
> -		goto err_disable_clk;
> +		clk_disable_unprepare(mdata->spi_clk);
> +		goto err_put_master;
>   	}
>
>   	clk_disable_unprepare(mdata->spi_clk);
> @@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   	ret = devm_spi_register_master(&pdev->dev, master);
>   	if (ret) {
>   		dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
> -		goto err_put_master;
> +		goto err_disable_runtime_pm;
>   	}
>
>   	if (mdata->dev_comp->need_pad_sel) {
> @@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   				"pad_num does not match num_chipselect(%d != %d)\n",
>   				mdata->pad_num, master->num_chipselect);
>   			ret = -EINVAL;
> -			goto err_put_master;
> +			goto err_disable_runtime_pm;
>   		}
>
>   		if (!master->cs_gpios && master->num_chipselect > 1) {
>   			dev_err(&pdev->dev,
>   				"cs_gpios not specified and num_chipselect > 1\n");
>   			ret = -EINVAL;
> -			goto err_put_master;
> +			goto err_disable_runtime_pm;
>   		}
>
>   		if (master->cs_gpios) {
> @@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   				if (ret) {
>   					dev_err(&pdev->dev,
>   						"can't get CS GPIO %i\n", i);
> -					goto err_put_master;
> +					goto err_disable_runtime_pm;
>   				}
>   			}
>   		}
> @@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
>
>   	return 0;
>
> -err_disable_clk:
> -	clk_disable_unprepare(mdata->spi_clk);
> +err_disable_runtime_pm:
> +	pm_runtime_disable(&pdev->dev);
>   err_put_master:
>   	spi_master_put(master);
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] spi: mediatek: revise mtk_spi_probe() failure flow
Date: Tue, 24 Nov 2015 19:12:42 +0100	[thread overview]
Message-ID: <5654A89A.3090202@gmail.com> (raw)
In-Reply-To: <1448332712-29039-1-git-send-email-leilk.liu@mediatek.com>



On 24/11/15 03:38, Leilk Liu wrote:
> This patch revises failure flow while pm_runtime_enable().

Please write a proper commit message explaining what this patch does.

>
> Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
> ---
>   drivers/spi/spi-mt65xx.c |   15 ++++++++-------
>   1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
> index 6c1a96e..00a36da 100644
> --- a/drivers/spi/spi-mt65xx.c
> +++ b/drivers/spi/spi-mt65xx.c
> @@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   	ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
>   	if (ret < 0) {
>   		dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret);
> -		goto err_disable_clk;
> +		clk_disable_unprepare(mdata->spi_clk);
> +		goto err_put_master;
>   	}
>
>   	clk_disable_unprepare(mdata->spi_clk);
> @@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   	ret = devm_spi_register_master(&pdev->dev, master);
>   	if (ret) {
>   		dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
> -		goto err_put_master;
> +		goto err_disable_runtime_pm;
>   	}
>
>   	if (mdata->dev_comp->need_pad_sel) {
> @@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   				"pad_num does not match num_chipselect(%d != %d)\n",
>   				mdata->pad_num, master->num_chipselect);
>   			ret = -EINVAL;
> -			goto err_put_master;
> +			goto err_disable_runtime_pm;
>   		}
>
>   		if (!master->cs_gpios && master->num_chipselect > 1) {
>   			dev_err(&pdev->dev,
>   				"cs_gpios not specified and num_chipselect > 1\n");
>   			ret = -EINVAL;
> -			goto err_put_master;
> +			goto err_disable_runtime_pm;
>   		}
>
>   		if (master->cs_gpios) {
> @@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   				if (ret) {
>   					dev_err(&pdev->dev,
>   						"can't get CS GPIO %i\n", i);
> -					goto err_put_master;
> +					goto err_disable_runtime_pm;
>   				}
>   			}
>   		}
> @@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
>
>   	return 0;
>
> -err_disable_clk:
> -	clk_disable_unprepare(mdata->spi_clk);
> +err_disable_runtime_pm:
> +	pm_runtime_disable(&pdev->dev);
>   err_put_master:
>   	spi_master_put(master);
>
>

WARNING: multiple messages have this Message-ID (diff)
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Leilk Liu <leilk.liu@mediatek.com>, Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org,
	linux-mediatek@lists.infradead.org
Subject: Re: [PATCH v2] spi: mediatek: revise mtk_spi_probe() failure flow
Date: Tue, 24 Nov 2015 19:12:42 +0100	[thread overview]
Message-ID: <5654A89A.3090202@gmail.com> (raw)
In-Reply-To: <1448332712-29039-1-git-send-email-leilk.liu@mediatek.com>



On 24/11/15 03:38, Leilk Liu wrote:
> This patch revises failure flow while pm_runtime_enable().

Please write a proper commit message explaining what this patch does.

>
> Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
> ---
>   drivers/spi/spi-mt65xx.c |   15 ++++++++-------
>   1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
> index 6c1a96e..00a36da 100644
> --- a/drivers/spi/spi-mt65xx.c
> +++ b/drivers/spi/spi-mt65xx.c
> @@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   	ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
>   	if (ret < 0) {
>   		dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret);
> -		goto err_disable_clk;
> +		clk_disable_unprepare(mdata->spi_clk);
> +		goto err_put_master;
>   	}
>
>   	clk_disable_unprepare(mdata->spi_clk);
> @@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   	ret = devm_spi_register_master(&pdev->dev, master);
>   	if (ret) {
>   		dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
> -		goto err_put_master;
> +		goto err_disable_runtime_pm;
>   	}
>
>   	if (mdata->dev_comp->need_pad_sel) {
> @@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   				"pad_num does not match num_chipselect(%d != %d)\n",
>   				mdata->pad_num, master->num_chipselect);
>   			ret = -EINVAL;
> -			goto err_put_master;
> +			goto err_disable_runtime_pm;
>   		}
>
>   		if (!master->cs_gpios && master->num_chipselect > 1) {
>   			dev_err(&pdev->dev,
>   				"cs_gpios not specified and num_chipselect > 1\n");
>   			ret = -EINVAL;
> -			goto err_put_master;
> +			goto err_disable_runtime_pm;
>   		}
>
>   		if (master->cs_gpios) {
> @@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
>   				if (ret) {
>   					dev_err(&pdev->dev,
>   						"can't get CS GPIO %i\n", i);
> -					goto err_put_master;
> +					goto err_disable_runtime_pm;
>   				}
>   			}
>   		}
> @@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev)
>
>   	return 0;
>
> -err_disable_clk:
> -	clk_disable_unprepare(mdata->spi_clk);
> +err_disable_runtime_pm:
> +	pm_runtime_disable(&pdev->dev);
>   err_put_master:
>   	spi_master_put(master);
>
>

  parent reply	other threads:[~2015-11-24 18:12 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-24  2:38 [PATCH v2] spi: mediatek: revise mtk_spi_probe() failure flow Leilk Liu
2015-11-24  2:38 ` Leilk Liu
2015-11-24  2:38 ` Leilk Liu
2015-11-24  2:38 ` Leilk Liu
     [not found] ` <1448332712-29039-1-git-send-email-leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-11-24 13:05   ` Mark Brown
2015-11-24 13:05     ` Mark Brown
2015-11-24 13:05     ` Mark Brown
2015-11-24 18:12   ` Matthias Brugger [this message]
2015-11-24 18:12     ` Matthias Brugger
2015-11-24 18:12     ` Matthias Brugger
     [not found]     ` <5654A89A.3090202-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-25  9:14       ` lei liu
2015-11-25  9:14         ` lei liu
2015-11-25  9:14         ` lei liu
2015-11-25  9:14         ` lei liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5654A89A.3090202@gmail.com \
    --to=matthias.bgg-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.