All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xinwei Kong <kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	pawel.moll-5wv7dgnIgG8@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	catalin.marinas-5wv7dgnIgG8@public.gmane.org,
	will.deacon-5wv7dgnIgG8@public.gmane.org,
	tyler.baker-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	arnd-r2nGTMty4D4@public.gmane.org,
	bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
	liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
	w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH 1/1] arm64: dts: add all hi6220 i2c nodes
Date: Wed, 25 Nov 2015 18:35:05 +0800	[thread overview]
Message-ID: <56558ED9.2010802@hisilicon.com> (raw)
In-Reply-To: <1448444942-5780-1-git-send-email-kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>

+to linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org

On 2015/11/25 17:49, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
> 
> Signed-off-by: Xinwei Kong <kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..6b591a9 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,42 @@
>  			clock-names = "uartclk", "apb_pclk";
>  			status = "disabled";
>  		};
> +
> +		i2c0: i2c@f7100000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7100000 0x0 0x1000>;
> +			interrupts = <0 44 4>;
> +			clocks = <&sys_ctrl HI6220_I2C0_CLK>;
> +			clock-names = "clk_i2c0";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> +			status = "ok";
> +		};
> +
> +		i2c1: i2c@f7101000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7101000 0x0 0x1000>;
> +			interrupts = <0 45 4>;
> +			clocks = <&sys_ctrl HI6220_I2C1_CLK>;
> +			clock-names = "clk_i2c1";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> +			status = "ok";
> +		};
> +
> +		i2c2: i2c@f7102000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7102000 0x0 0x1000>;
> +			interrupts = <0 46 4>;
> +			clocks = <&sys_ctrl HI6220_I2C2_CLK>;
> +			clock-names = "clk_i2c2";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> +			status = "ok";
> +		};
> +
>  	};
>  };
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: kong.kongxinwei@hisilicon.com (Xinwei Kong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] arm64: dts: add all hi6220 i2c nodes
Date: Wed, 25 Nov 2015 18:35:05 +0800	[thread overview]
Message-ID: <56558ED9.2010802@hisilicon.com> (raw)
In-Reply-To: <1448444942-5780-1-git-send-email-kong.kongxinwei@hisilicon.com>

+to linux-i2c at vger.kernel.org

On 2015/11/25 17:49, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
> 
> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..6b591a9 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,42 @@
>  			clock-names = "uartclk", "apb_pclk";
>  			status = "disabled";
>  		};
> +
> +		i2c0: i2c at f7100000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7100000 0x0 0x1000>;
> +			interrupts = <0 44 4>;
> +			clocks = <&sys_ctrl HI6220_I2C0_CLK>;
> +			clock-names = "clk_i2c0";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> +			status = "ok";
> +		};
> +
> +		i2c1: i2c at f7101000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7101000 0x0 0x1000>;
> +			interrupts = <0 45 4>;
> +			clocks = <&sys_ctrl HI6220_I2C1_CLK>;
> +			clock-names = "clk_i2c1";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> +			status = "ok";
> +		};
> +
> +		i2c2: i2c at f7102000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7102000 0x0 0x1000>;
> +			interrupts = <0 46 4>;
> +			clocks = <&sys_ctrl HI6220_I2C2_CLK>;
> +			clock-names = "clk_i2c2";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> +			status = "ok";
> +		};
> +
>  	};
>  };
> 

WARNING: multiple messages have this Message-ID (diff)
From: Xinwei Kong <kong.kongxinwei@hisilicon.com>
To: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
	<mark.rutland@arm.com>, <galak@codeaurora.org>,
	<catalin.marinas@arm.com>, <will.deacon@arm.com>,
	<tyler.baker@linaro.org>, <arnd@arndb.de>,
	<bintian.wang@huawei.com>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-i2c@vger.kernel.org>
Cc: <puck.chen@hisilicon.com>, <liguozhu@hisilicon.com>, <w.f@huawei.com>
Subject: Re: [PATCH 1/1] arm64: dts: add all hi6220 i2c nodes
Date: Wed, 25 Nov 2015 18:35:05 +0800	[thread overview]
Message-ID: <56558ED9.2010802@hisilicon.com> (raw)
In-Reply-To: <1448444942-5780-1-git-send-email-kong.kongxinwei@hisilicon.com>

+to linux-i2c@vger.kernel.org

On 2015/11/25 17:49, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
> 
> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..6b591a9 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,42 @@
>  			clock-names = "uartclk", "apb_pclk";
>  			status = "disabled";
>  		};
> +
> +		i2c0: i2c@f7100000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7100000 0x0 0x1000>;
> +			interrupts = <0 44 4>;
> +			clocks = <&sys_ctrl HI6220_I2C0_CLK>;
> +			clock-names = "clk_i2c0";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> +			status = "ok";
> +		};
> +
> +		i2c1: i2c@f7101000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7101000 0x0 0x1000>;
> +			interrupts = <0 45 4>;
> +			clocks = <&sys_ctrl HI6220_I2C1_CLK>;
> +			clock-names = "clk_i2c1";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> +			status = "ok";
> +		};
> +
> +		i2c2: i2c@f7102000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7102000 0x0 0x1000>;
> +			interrupts = <0 46 4>;
> +			clocks = <&sys_ctrl HI6220_I2C2_CLK>;
> +			clock-names = "clk_i2c2";
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> +			status = "ok";
> +		};
> +
>  	};
>  };
> 


  parent reply	other threads:[~2015-11-25 10:35 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-25  9:49 [PATCH 1/1] arm64: dts: add all hi6220 i2c nodes Xinwei Kong
2015-11-25  9:49 ` Xinwei Kong
2015-11-25  9:49 ` Xinwei Kong
     [not found] ` <1448444942-5780-1-git-send-email-kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-11-25 10:35   ` Xinwei Kong [this message]
2015-11-25 10:35     ` Xinwei Kong
2015-11-25 10:35     ` Xinwei Kong
2015-11-25 12:24 ` Shawn Guo
2015-11-25 12:24   ` Shawn Guo
2015-11-26  3:16   ` Xinwei Kong
2015-11-26  3:16     ` Xinwei Kong
2015-11-26  3:16     ` Xinwei Kong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56558ED9.2010802@hisilicon.com \
    --to=kong.kongxinwei-c8/m+/jpzteamjb+lgu22q@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
    --cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=tyler.baker-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
    --cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.