* [PATCH v2 1/4] pinctrl/lantiq: updating devicetree binding description @ 2015-11-25 10:18 ` Martin Schiller 0 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-25 10:18 UTC (permalink / raw) To: linux-gpio, devicetree, linux-mips Cc: linus.walleij, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck, Martin Schiller This patch adds the new dedicated "lantiq,<chip>-pinctrl" compatible strings to the devicetree bindings Documentation, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or "xrx300" and marks the "lantiq,pinctrl-xway", "lantiq,pinctrl-ase" and "lantiq,pinctrl-xr9" compatible strings as DEPRECATED. Signed-off-by: Martin Schiller <mschiller@tdt.de> --- .../bindings/pinctrl/lantiq,pinctrl-xway.txt | 110 +++++++++++++++++++-- 1 file changed, 102 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt index e89b467..8e5216b 100644 --- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt @@ -1,7 +1,16 @@ Lantiq XWAY pinmux controller Required properties: -- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" +- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube") + "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or + "lantiq,xrx200-pinctrl") + "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl") + "lantiq,<chip>-pinctrl", where <chip> is: + "ase" (XWAY AMAZON Family) + "danube" (XWAY DANUBE Family) + "xrx100" (XWAY xRX100 Family) + "xrx200" (XWAY xRX200 Family) + "xrx300" (XWAY xRX300 Family) - reg: Should contain the physical address and length of the gpio/pinmux register range @@ -36,19 +45,87 @@ Required subnode-properties: Valid values for group and function names: +XWAY: (DEPRECATED: Use DANUBE) mux groups: exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, - spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, req3 - additional mux groups (XR9 only): - mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu + +XR9: ( DEPRECATED: Use xRX100/xRX200) + mux groups: + exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25, + ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, + nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, + asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy + +AMAZON: + mux groups: + exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, + spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0, + clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe + +DANUBE: + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1, + spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, + gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, + req1, req2, req3, dfe led0, dfe led1 functions: - spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe +xRX100: + mux groups: + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, + spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, + dfe led0, dfe led1 + + functions: + spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe + +xRX200: + mux groups: + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, + spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts, + usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di, + usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2, + stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, + gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1, + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 + + functions: + spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy + +xRX300: + mux groups: + exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle, + nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5, + nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do, + spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx, + usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2, + mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1 + + functions: + spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy Definition of pin configurations: @@ -62,15 +139,32 @@ Optional subnode-properties: 0: none, 1: down, 2: up. - lantiq,open-drain: Boolean, enables open-drain on the defined pin. -Valid values for XWAY pin names: +Valid values for XWAY pin names: (DEPRECATED: Use DANUBE) Pinconf pins can be referenced via the names io0-io31. -Valid values for XR9 pin names: +Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200) Pinconf pins can be referenced via the names io0-io55. +Valid values for AMAZON pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for DANUBE pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for xRX100 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Valid values for xRX200 pin names: + Pinconf pins can be referenced via the names io0-io49. + +Valid values for xRX300 pin names: + Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11, + io13-io19,io23-io27,io34-io36, + io42-io43,io48-io61. + Example: gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; + compatible = "lantiq,danube-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; -- 2.1.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 1/4] pinctrl/lantiq: updating devicetree binding description @ 2015-11-25 10:18 ` Martin Schiller 0 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-25 10:18 UTC (permalink / raw) To: linux-gpio, devicetree, linux-mips Cc: linus.walleij, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck, Martin Schiller This patch adds the new dedicated "lantiq,<chip>-pinctrl" compatible strings to the devicetree bindings Documentation, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or "xrx300" and marks the "lantiq,pinctrl-xway", "lantiq,pinctrl-ase" and "lantiq,pinctrl-xr9" compatible strings as DEPRECATED. Signed-off-by: Martin Schiller <mschiller@tdt.de> --- .../bindings/pinctrl/lantiq,pinctrl-xway.txt | 110 +++++++++++++++++++-- 1 file changed, 102 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt index e89b467..8e5216b 100644 --- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt @@ -1,7 +1,16 @@ Lantiq XWAY pinmux controller Required properties: -- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" +- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube") + "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or + "lantiq,xrx200-pinctrl") + "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl") + "lantiq,<chip>-pinctrl", where <chip> is: + "ase" (XWAY AMAZON Family) + "danube" (XWAY DANUBE Family) + "xrx100" (XWAY xRX100 Family) + "xrx200" (XWAY xRX200 Family) + "xrx300" (XWAY xRX300 Family) - reg: Should contain the physical address and length of the gpio/pinmux register range @@ -36,19 +45,87 @@ Required subnode-properties: Valid values for group and function names: +XWAY: (DEPRECATED: Use DANUBE) mux groups: exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, - spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, req3 - additional mux groups (XR9 only): - mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu + +XR9: ( DEPRECATED: Use xRX100/xRX200) + mux groups: + exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25, + ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, + nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, + asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy + +AMAZON: + mux groups: + exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, + spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0, + clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe + +DANUBE: + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1, + spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, + gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, + req1, req2, req3, dfe led0, dfe led1 functions: - spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe +xRX100: + mux groups: + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, + spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, + dfe led0, dfe led1 + + functions: + spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe + +xRX200: + mux groups: + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, + spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts, + usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di, + usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2, + stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, + gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1, + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 + + functions: + spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy + +xRX300: + mux groups: + exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle, + nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5, + nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do, + spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx, + usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2, + mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1 + + functions: + spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy Definition of pin configurations: @@ -62,15 +139,32 @@ Optional subnode-properties: 0: none, 1: down, 2: up. - lantiq,open-drain: Boolean, enables open-drain on the defined pin. -Valid values for XWAY pin names: +Valid values for XWAY pin names: (DEPRECATED: Use DANUBE) Pinconf pins can be referenced via the names io0-io31. -Valid values for XR9 pin names: +Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200) Pinconf pins can be referenced via the names io0-io55. +Valid values for AMAZON pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for DANUBE pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for xRX100 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Valid values for xRX200 pin names: + Pinconf pins can be referenced via the names io0-io49. + +Valid values for xRX300 pin names: + Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11, + io13-io19,io23-io27,io34-io36, + io42-io43,io48-io61. + Example: gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; + compatible = "lantiq,danube-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; -- 2.1.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 2/4] pinctrl/lantiq: introduce new dedicated devicetree bindings 2015-11-25 10:18 ` Martin Schiller @ 2015-11-25 10:18 ` Martin Schiller -1 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-25 10:18 UTC (permalink / raw) To: linux-gpio, devicetree, linux-mips Cc: linus.walleij, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck, Martin Schiller This patch introduces new dedicated "lantiq,<chip>-pinctrl" devicetree bindings, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or "xrx300" and marks the "lantiq,pinctrl-xway", "lantiq,pinctrl-ase" and "lantiq,pinctrl-xr9" bindings as DEPRECATED. Based on the newest Lantiq Hardware Description it turend out, that there are some differences in the GPIO alternative functions of the Danube, xRX100 and xRX200 families, which makes it impossible to use only one xway_mfp table. This patch also adds support for the xRX300 family. Signed-off-by: Martin Schiller <mschiller@tdt.de> --- drivers/pinctrl/pinctrl-lantiq.h | 8 + drivers/pinctrl/pinctrl-xway.c | 1181 +++++++++++++++++++++++++++++++++----- 2 files changed, 1059 insertions(+), 130 deletions(-) diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h index eb89ba0..e137d13 100644 --- a/drivers/pinctrl/pinctrl-lantiq.h +++ b/drivers/pinctrl/pinctrl-lantiq.h @@ -162,6 +162,14 @@ enum ltq_pin { GPIO53, GPIO54, GPIO55, + GPIO56, + GPIO57, + GPIO58, + GPIO59, + GPIO60, /* 60 */ + GPIO61, + GPIO62, + GPIO63, GPIO64, GPIO65, diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index ae724bd..a064962 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -7,6 +7,7 @@ * publishhed by the Free Software Foundation. * * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + * Copyright (C) 2015 Martin Schiller <mschiller@tdt.de> */ #include <linux/err.h> @@ -24,7 +25,7 @@ #include <lantiq_soc.h> -/* we have 3 1/2 banks of 16 bit each */ +/* we have up to 4 banks of 16 bit each */ #define PINS 16 #define PORT3 3 #define PORT(x) (x / PINS) @@ -35,7 +36,7 @@ #define MUX_ALT1 0x2 /* - * each bank has this offset apart from the 1/2 bank that is mixed into the + * each bank has this offset apart from the 4th bank that is mixed into the * other 3 ranges */ #define REG_OFF 0x30 @@ -51,7 +52,7 @@ #define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c) #define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20) -/* the 1/2 port needs special offsets for some registers */ +/* the 4th port needs special offsets for some registers */ #define GPIO3_OD (GPIO_BASE(0) + 0x24) #define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28) #define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C) @@ -80,17 +81,18 @@ #define FUNC_MUX(f, m) \ { .func = f, .mux = XWAY_MUX_##m, } -#define XWAY_MAX_PIN 32 -#define XR9_MAX_PIN 56 - enum xway_mux { XWAY_MUX_GPIO = 0, XWAY_MUX_SPI, XWAY_MUX_ASC, + XWAY_MUX_USIF, XWAY_MUX_PCI, + XWAY_MUX_CBUS, XWAY_MUX_CGU, XWAY_MUX_EBU, + XWAY_MUX_EBU2, XWAY_MUX_JTAG, + XWAY_MUX_MCD, XWAY_MUX_EXIN, XWAY_MUX_TDM, XWAY_MUX_STP, @@ -103,9 +105,15 @@ enum xway_mux { XWAY_MUX_DFE, XWAY_MUX_SDIO, XWAY_MUX_GPHY, + XWAY_MUX_SSI, + XWAY_MUX_WIFI, XWAY_MUX_NONE = 0xffff, }; +/* --------- DEPRECATED: xr9 related code --------- */ +/* ---------- use xrx100/xrx200 instead ---------- */ +#define XR9_MAX_PIN 56 + static const struct ltq_mfp_pin xway_mfp[] = { /* pin f0 f1 f2 f3 */ MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM), @@ -113,7 +121,7 @@ static const struct ltq_mfp_pin xway_mfp[] = { MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY), MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI), MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC), - MFP_XWAY(GPIO5, GPIO, STP, NONE, GPHY), + MFP_XWAY(GPIO5, GPIO, STP, GPHY, NONE), MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), MFP_XWAY(GPIO7, GPIO, CGU, PCI, GPHY), MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), @@ -152,7 +160,7 @@ static const struct ltq_mfp_pin xway_mfp[] = { MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), - MFP_XWAY(GPIO44, GPIO, NONE, GPHY, SIN), + MFP_XWAY(GPIO44, GPIO, NONE, SIN, GPHY), MFP_XWAY(GPIO45, GPIO, NONE, GPHY, SIN), MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), MFP_XWAY(GPIO47, GPIO, NONE, GPHY, SIN), @@ -166,42 +174,6 @@ static const struct ltq_mfp_pin xway_mfp[] = { MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), }; -static const struct ltq_mfp_pin ase_mfp[] = { - /* pin f0 f1 f2 f3 */ - MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), - MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), - MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), - MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), - MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), - MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), - MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), - MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), - MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), - MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), - MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), - MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), - MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), - MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), - MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), - MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), - MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), - MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII), - MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), - MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII), - MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), - MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), - MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), -}; - static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35}; static const unsigned pins_asc0[] = {GPIO11, GPIO12}; static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10}; @@ -231,6 +203,8 @@ static const unsigned pins_nand_cle[] = {GPIO24}; static const unsigned pins_nand_rdy[] = {GPIO48}; static const unsigned pins_nand_rd[] = {GPIO49}; +static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; + static const unsigned pins_exin0[] = {GPIO0}; static const unsigned pins_exin1[] = {GPIO1}; static const unsigned pins_exin2[] = {GPIO2}; @@ -240,7 +214,7 @@ static const unsigned pins_exin5[] = {GPIO9}; static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18}; static const unsigned pins_spi_cs1[] = {GPIO15}; -static const unsigned pins_spi_cs2[] = {GPIO21}; +static const unsigned pins_spi_cs2[] = {GPIO22}; static const unsigned pins_spi_cs3[] = {GPIO13}; static const unsigned pins_spi_cs4[] = {GPIO10}; static const unsigned pins_spi_cs5[] = {GPIO9}; @@ -264,25 +238,6 @@ static const unsigned pins_pci_req2[] = {GPIO31}; static const unsigned pins_pci_req3[] = {GPIO3}; static const unsigned pins_pci_req4[] = {GPIO37}; -static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; -static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; -static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; -static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4}; -static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2}; - -static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; -static const unsigned ase_pins_spi_cs1[] = {GPIO7}; -static const unsigned ase_pins_spi_cs2[] = {GPIO15}; -static const unsigned ase_pins_spi_cs3[] = {GPIO14}; - -static const unsigned ase_pins_exin0[] = {GPIO6}; -static const unsigned ase_pins_exin1[] = {GPIO29}; -static const unsigned ase_pins_exin2[] = {GPIO0}; - -static const unsigned ase_pins_gpt1[] = {GPIO5}; -static const unsigned ase_pins_gpt2[] = {GPIO4}; -static const unsigned ase_pins_gpt3[] = {GPIO25}; - static const struct ltq_pin_group xway_grps[] = { GRP_MUX("exin0", EXIN, pins_exin0), GRP_MUX("exin1", EXIN, pins_exin1), @@ -338,24 +293,6 @@ static const struct ltq_pin_group xway_grps[] = { GRP_MUX("gphy1 led2", GPHY, pins_gphy1_led2), }; -static const struct ltq_pin_group ase_grps[] = { - GRP_MUX("exin0", EXIN, ase_pins_exin0), - GRP_MUX("exin1", EXIN, ase_pins_exin1), - GRP_MUX("exin2", EXIN, ase_pins_exin2), - GRP_MUX("jtag", JTAG, ase_pins_jtag), - GRP_MUX("stp", STP, ase_pins_stp), - GRP_MUX("asc", ASC, ase_pins_asc), - GRP_MUX("gpt1", GPT, ase_pins_gpt1), - GRP_MUX("gpt2", GPT, ase_pins_gpt2), - GRP_MUX("gpt3", GPT, ase_pins_gpt3), - GRP_MUX("ephy", EPHY, ase_pins_ephy), - GRP_MUX("dfe", DFE, ase_pins_dfe), - GRP_MUX("spi", SPI, ase_pins_spi), - GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), - GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), - GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), -}; - static const char * const xway_pci_grps[] = {"gnt1", "gnt2", "gnt3", "req1", "req2", "req3"}; @@ -395,30 +332,6 @@ static const char * const xrx_pci_grps[] = {"gnt1", "gnt2", "req1", "req2", "req3", "req4"}; -/* ase */ -static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; -static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; -static const char * const ase_dfe_grps[] = {"dfe"}; -static const char * const ase_ephy_grps[] = {"ephy"}; -static const char * const ase_asc_grps[] = {"asc"}; -static const char * const ase_jtag_grps[] = {"jtag"}; -static const char * const ase_stp_grps[] = {"stp"}; -static const char * const ase_spi_grps[] = {"spi", "spi_cs1", - "spi_cs2", "spi_cs3"}; - -static const struct ltq_pmx_func danube_funcs[] = { - {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, - {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, - {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, - {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, - {"exin", ARRAY_AND_SIZE(xway_exin_grps)}, - {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, - {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, - {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, - {"pci", ARRAY_AND_SIZE(xway_pci_grps)}, - {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)}, -}; - static const struct ltq_pmx_func xrx_funcs[] = { {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, @@ -434,17 +347,991 @@ static const struct ltq_pmx_func xrx_funcs[] = { {"gphy", ARRAY_AND_SIZE(xrx_gphy_grps)}, }; +/* --------- ase related code --------- */ +#define ASE_MAX_PIN 32 + +static const struct ltq_mfp_pin ase_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), + MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), + MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), + MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), + MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), + MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), + MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), + MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), + MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), + MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), + MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO21, GPIO, EBU, MII, EBU2), + MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO24, GPIO, EBU, EBU2, MDIO), + MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), + MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO27, GPIO, EBU, NONE, MDIO), + MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), + MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), + MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), +}; + +static const unsigned ase_exin_pin_map[] = {GPIO6, GPIO29, GPIO0}; + +static const unsigned ase_pins_exin0[] = {GPIO6}; +static const unsigned ase_pins_exin1[] = {GPIO29}; +static const unsigned ase_pins_exin2[] = {GPIO0}; + +static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; +static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; +static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; +static const unsigned ase_pins_mdio[] = {GPIO24, GPIO27}; +static const unsigned ase_pins_ephy_led0[] = {GPIO2}; +static const unsigned ase_pins_ephy_led1[] = {GPIO3}; +static const unsigned ase_pins_ephy_led2[] = {GPIO4}; +static const unsigned ase_pins_dfe_led0[] = {GPIO1}; +static const unsigned ase_pins_dfe_led1[] = {GPIO2}; + +static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; /* DEPRECATED */ +static const unsigned ase_pins_spi_di[] = {GPIO8}; +static const unsigned ase_pins_spi_do[] = {GPIO9}; +static const unsigned ase_pins_spi_clk[] = {GPIO10}; +static const unsigned ase_pins_spi_cs1[] = {GPIO7}; +static const unsigned ase_pins_spi_cs2[] = {GPIO15}; +static const unsigned ase_pins_spi_cs3[] = {GPIO14}; + +static const unsigned ase_pins_gpt1[] = {GPIO5}; +static const unsigned ase_pins_gpt2[] = {GPIO4}; +static const unsigned ase_pins_gpt3[] = {GPIO25}; + +static const unsigned ase_pins_clkout0[] = {GPIO23}; +static const unsigned ase_pins_clkout1[] = {GPIO22}; +static const unsigned ase_pins_clkout2[] = {GPIO14}; + +static const struct ltq_pin_group ase_grps[] = { + GRP_MUX("exin0", EXIN, ase_pins_exin0), + GRP_MUX("exin1", EXIN, ase_pins_exin1), + GRP_MUX("exin2", EXIN, ase_pins_exin2), + GRP_MUX("jtag", JTAG, ase_pins_jtag), + GRP_MUX("spi", SPI, ase_pins_spi), /* DEPRECATED */ + GRP_MUX("spi_di", SPI, ase_pins_spi_di), + GRP_MUX("spi_do", SPI, ase_pins_spi_do), + GRP_MUX("spi_clk", SPI, ase_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), + GRP_MUX("asc", ASC, ase_pins_asc), + GRP_MUX("stp", STP, ase_pins_stp), + GRP_MUX("gpt1", GPT, ase_pins_gpt1), + GRP_MUX("gpt2", GPT, ase_pins_gpt2), + GRP_MUX("gpt3", GPT, ase_pins_gpt3), + GRP_MUX("clkout0", CGU, ase_pins_clkout0), + GRP_MUX("clkout1", CGU, ase_pins_clkout1), + GRP_MUX("clkout2", CGU, ase_pins_clkout2), + GRP_MUX("mdio", MDIO, ase_pins_mdio), + GRP_MUX("dfe led0", DFE, ase_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, ase_pins_dfe_led1), + GRP_MUX("ephy led0", EPHY, ase_pins_ephy_led0), + GRP_MUX("ephy led1", EPHY, ase_pins_ephy_led1), + GRP_MUX("ephy led2", EPHY, ase_pins_ephy_led2), +}; + +static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const ase_cgu_grps[] = {"clkout0", "clkout1", + "clkout2"}; +static const char * const ase_mdio_grps[] = {"mdio"}; +static const char * const ase_dfe_grps[] = {"dfe led0", "dfe led1"}; +static const char * const ase_ephy_grps[] = {"ephy led0", "ephy led1", + "ephy led2"}; +static const char * const ase_asc_grps[] = {"asc"}; +static const char * const ase_jtag_grps[] = {"jtag"}; +static const char * const ase_stp_grps[] = {"stp"}; +static const char * const ase_spi_grps[] = {"spi", /* DEPRECATED */ + "spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs2", "spi_cs3"}; + static const struct ltq_pmx_func ase_funcs[] = { {"spi", ARRAY_AND_SIZE(ase_spi_grps)}, {"asc", ARRAY_AND_SIZE(ase_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(ase_cgu_grps)}, {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)}, {"exin", ARRAY_AND_SIZE(ase_exin_grps)}, {"stp", ARRAY_AND_SIZE(ase_stp_grps)}, {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)}, + {"mdio", ARRAY_AND_SIZE(ase_mdio_grps)}, {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)}, {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)}, }; +/* --------- danube related code --------- */ +#define DANUBE_MAX_PIN 32 + +static const struct ltq_mfp_pin danube_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, MII), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, MII), + MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), + MFP_XWAY(GPIO4, GPIO, STP, DFE, ASC), + MFP_XWAY(GPIO5, GPIO, STP, MII, DFE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), + MFP_XWAY(GPIO7, GPIO, CGU, CBUS, MII), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, MII), + MFP_XWAY(GPIO9, GPIO, ASC, SPI, MII), + MFP_XWAY(GPIO10, GPIO, ASC, SPI, MII), + MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI), + MFP_XWAY(GPIO12, GPIO, ASC, CBUS, MCD), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, MII), + MFP_XWAY(GPIO14, GPIO, CGU, CBUS, MII), + MFP_XWAY(GPIO15, GPIO, SPI, SDIO, JTAG), + MFP_XWAY(GPIO16, GPIO, SPI, SDIO, JTAG), + MFP_XWAY(GPIO17, GPIO, SPI, SDIO, JTAG), + MFP_XWAY(GPIO18, GPIO, SPI, SDIO, JTAG), + MFP_XWAY(GPIO19, GPIO, PCI, SDIO, MII), + MFP_XWAY(GPIO20, GPIO, JTAG, SDIO, MII), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, MCD, MII), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, SDIO, ASC), + MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), + MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC), + MFP_XWAY(GPIO28, GPIO, GPT, MII, SDIO), + MFP_XWAY(GPIO29, GPIO, PCI, CBUS, MII), + MFP_XWAY(GPIO30, GPIO, PCI, CBUS, MII), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, MII), +}; + +static const unsigned danube_exin_pin_map[] = {GPIO0, GPIO1, GPIO2}; + +static const unsigned danube_pins_exin0[] = {GPIO0}; +static const unsigned danube_pins_exin1[] = {GPIO1}; +static const unsigned danube_pins_exin2[] = {GPIO2}; + +static const unsigned danube_pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO18, GPIO20}; +static const unsigned danube_pins_asc0[] = {GPIO11, GPIO12}; +static const unsigned danube_pins_asc0_cts_rts[] = {GPIO9, GPIO10}; +static const unsigned danube_pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned danube_pins_nmi[] = {GPIO8}; + +static const unsigned danube_pins_dfe_led0[] = {GPIO4}; +static const unsigned danube_pins_dfe_led1[] = {GPIO5}; + +static const unsigned danube_pins_ebu_a24[] = {GPIO13}; +static const unsigned danube_pins_ebu_clk[] = {GPIO21}; +static const unsigned danube_pins_ebu_cs1[] = {GPIO23}; +static const unsigned danube_pins_ebu_a23[] = {GPIO24}; +static const unsigned danube_pins_ebu_wait[] = {GPIO26}; +static const unsigned danube_pins_ebu_a25[] = {GPIO31}; + +static const unsigned danube_pins_nand_ale[] = {GPIO13}; +static const unsigned danube_pins_nand_cs1[] = {GPIO23}; +static const unsigned danube_pins_nand_cle[] = {GPIO24}; + +static const unsigned danube_pins_spi[] = {GPIO16, GPIO17, GPIO18}; /* DEPRECATED */ +static const unsigned danube_pins_spi_di[] = {GPIO16}; +static const unsigned danube_pins_spi_do[] = {GPIO17}; +static const unsigned danube_pins_spi_clk[] = {GPIO18}; +static const unsigned danube_pins_spi_cs1[] = {GPIO15}; +static const unsigned danube_pins_spi_cs2[] = {GPIO21}; +static const unsigned danube_pins_spi_cs3[] = {GPIO13}; +static const unsigned danube_pins_spi_cs4[] = {GPIO10}; +static const unsigned danube_pins_spi_cs5[] = {GPIO9}; +static const unsigned danube_pins_spi_cs6[] = {GPIO11}; + +static const unsigned danube_pins_gpt1[] = {GPIO28}; +static const unsigned danube_pins_gpt2[] = {GPIO21}; +static const unsigned danube_pins_gpt3[] = {GPIO6}; + +static const unsigned danube_pins_clkout0[] = {GPIO8}; +static const unsigned danube_pins_clkout1[] = {GPIO7}; +static const unsigned danube_pins_clkout2[] = {GPIO3}; +static const unsigned danube_pins_clkout3[] = {GPIO2}; + +static const unsigned danube_pins_pci_gnt1[] = {GPIO30}; +static const unsigned danube_pins_pci_gnt2[] = {GPIO23}; +static const unsigned danube_pins_pci_gnt3[] = {GPIO19}; +static const unsigned danube_pins_pci_req1[] = {GPIO29}; +static const unsigned danube_pins_pci_req2[] = {GPIO31}; +static const unsigned danube_pins_pci_req3[] = {GPIO3}; + +static const struct ltq_pin_group danube_grps[] = { + GRP_MUX("exin0", EXIN, danube_pins_exin0), + GRP_MUX("exin1", EXIN, danube_pins_exin1), + GRP_MUX("exin2", EXIN, danube_pins_exin2), + GRP_MUX("jtag", JTAG, danube_pins_jtag), + GRP_MUX("ebu a23", EBU, danube_pins_ebu_a23), + GRP_MUX("ebu a24", EBU, danube_pins_ebu_a24), + GRP_MUX("ebu a25", EBU, danube_pins_ebu_a25), + GRP_MUX("ebu clk", EBU, danube_pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, danube_pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, danube_pins_ebu_wait), + GRP_MUX("nand ale", EBU, danube_pins_nand_ale), + GRP_MUX("nand cs1", EBU, danube_pins_nand_cs1), + GRP_MUX("nand cle", EBU, danube_pins_nand_cle), + GRP_MUX("spi", SPI, danube_pins_spi), /* DEPRECATED */ + GRP_MUX("spi_di", SPI, danube_pins_spi_di), + GRP_MUX("spi_do", SPI, danube_pins_spi_do), + GRP_MUX("spi_clk", SPI, danube_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, danube_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, danube_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, danube_pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, danube_pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, danube_pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, danube_pins_spi_cs6), + GRP_MUX("asc0", ASC, danube_pins_asc0), + GRP_MUX("asc0 cts rts", ASC, danube_pins_asc0_cts_rts), + GRP_MUX("stp", STP, danube_pins_stp), + GRP_MUX("nmi", NMI, danube_pins_nmi), + GRP_MUX("gpt1", GPT, danube_pins_gpt1), + GRP_MUX("gpt2", GPT, danube_pins_gpt2), + GRP_MUX("gpt3", GPT, danube_pins_gpt3), + GRP_MUX("clkout0", CGU, danube_pins_clkout0), + GRP_MUX("clkout1", CGU, danube_pins_clkout1), + GRP_MUX("clkout2", CGU, danube_pins_clkout2), + GRP_MUX("clkout3", CGU, danube_pins_clkout3), + GRP_MUX("gnt1", PCI, danube_pins_pci_gnt1), + GRP_MUX("gnt2", PCI, danube_pins_pci_gnt2), + GRP_MUX("gnt3", PCI, danube_pins_pci_gnt3), + GRP_MUX("req1", PCI, danube_pins_pci_req1), + GRP_MUX("req2", PCI, danube_pins_pci_req2), + GRP_MUX("req3", PCI, danube_pins_pci_req3), + GRP_MUX("dfe led0", DFE, danube_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, danube_pins_dfe_led1), +}; + +static const char * const danube_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "req1", + "req2", "req3"}; +static const char * const danube_spi_grps[] = {"spi", /* DEPRECATED */ + "spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const danube_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const danube_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle"}; +static const char * const danube_dfe_grps[] = {"dfe led0", "dfe led1"}; +static const char * const danube_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const danube_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const danube_asc_grps[] = {"asc0", "asc0 cts rts"}; +static const char * const danube_jtag_grps[] = {"jtag"}; +static const char * const danube_stp_grps[] = {"stp"}; +static const char * const danube_nmi_grps[] = {"nmi"}; + +static const struct ltq_pmx_func danube_funcs[] = { + {"spi", ARRAY_AND_SIZE(danube_spi_grps)}, + {"asc", ARRAY_AND_SIZE(danube_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(danube_cgu_grps)}, + {"jtag", ARRAY_AND_SIZE(danube_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(danube_exin_grps)}, + {"stp", ARRAY_AND_SIZE(danube_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(danube_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(danube_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(danube_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(danube_ebu_grps)}, + {"dfe", ARRAY_AND_SIZE(danube_dfe_grps)}, +}; + +/* --------- xrx100 related code --------- */ +#define XRX100_MAX_PIN 56 + +static const struct ltq_mfp_pin xrx100_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE), + MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), + MFP_XWAY(GPIO4, GPIO, STP, DFE, ASC), + MFP_XWAY(GPIO5, GPIO, STP, NONE, DFE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), + MFP_XWAY(GPIO7, GPIO, CGU, CBUS, NONE), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), + MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN), + MFP_XWAY(GPIO10, GPIO, ASC, SPI, EXIN), + MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI), + MFP_XWAY(GPIO12, GPIO, ASC, CBUS, MCD), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, NONE, NONE), + MFP_XWAY(GPIO15, GPIO, SPI, SDIO, MCD), + MFP_XWAY(GPIO16, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO17, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO18, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO19, GPIO, PCI, SDIO, CGU), + MFP_XWAY(GPIO20, GPIO, NONE, SDIO, EBU), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, NONE, EBU), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, SDIO, ASC), + MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), + MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC), + MFP_XWAY(GPIO28, GPIO, GPT, NONE, SDIO), + MFP_XWAY(GPIO29, GPIO, PCI, CBUS, NONE), + MFP_XWAY(GPIO30, GPIO, PCI, CBUS, NONE), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), + MFP_XWAY(GPIO32, GPIO, MII, NONE, EBU), + MFP_XWAY(GPIO33, GPIO, MII, NONE, EBU), + MFP_XWAY(GPIO34, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO35, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO36, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO39, GPIO, NONE, EXIN, NONE), + MFP_XWAY(GPIO40, GPIO, MII, TDM, NONE), + MFP_XWAY(GPIO41, GPIO, MII, TDM, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, GPIO, MII, SIN, NONE), + MFP_XWAY(GPIO45, GPIO, MII, NONE, SIN), + MFP_XWAY(GPIO46, GPIO, MII, NONE, EXIN), + MFP_XWAY(GPIO47, GPIO, MII, NONE, SIN), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), +}; + +static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9}; + +static const unsigned xrx100_pins_exin0[] = {GPIO0}; +static const unsigned xrx100_pins_exin1[] = {GPIO1}; +static const unsigned xrx100_pins_exin2[] = {GPIO2}; +static const unsigned xrx100_pins_exin3[] = {GPIO39}; +static const unsigned xrx100_pins_exin4[] = {GPIO10}; +static const unsigned xrx100_pins_exin5[] = {GPIO9}; + +static const unsigned xrx100_pins_asc0[] = {GPIO11, GPIO12}; +static const unsigned xrx100_pins_asc0_cts_rts[] = {GPIO9, GPIO10}; +static const unsigned xrx100_pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned xrx100_pins_nmi[] = {GPIO8}; +static const unsigned xrx100_pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned xrx100_pins_dfe_led0[] = {GPIO4}; +static const unsigned xrx100_pins_dfe_led1[] = {GPIO5}; + +static const unsigned xrx100_pins_ebu_a24[] = {GPIO13}; +static const unsigned xrx100_pins_ebu_clk[] = {GPIO21}; +static const unsigned xrx100_pins_ebu_cs1[] = {GPIO23}; +static const unsigned xrx100_pins_ebu_a23[] = {GPIO24}; +static const unsigned xrx100_pins_ebu_wait[] = {GPIO26}; +static const unsigned xrx100_pins_ebu_a25[] = {GPIO31}; + +static const unsigned xrx100_pins_nand_ale[] = {GPIO13}; +static const unsigned xrx100_pins_nand_cs1[] = {GPIO23}; +static const unsigned xrx100_pins_nand_cle[] = {GPIO24}; +static const unsigned xrx100_pins_nand_rdy[] = {GPIO48}; +static const unsigned xrx100_pins_nand_rd[] = {GPIO49}; + +static const unsigned xrx100_pins_spi_di[] = {GPIO16}; +static const unsigned xrx100_pins_spi_do[] = {GPIO17}; +static const unsigned xrx100_pins_spi_clk[] = {GPIO18}; +static const unsigned xrx100_pins_spi_cs1[] = {GPIO15}; +static const unsigned xrx100_pins_spi_cs2[] = {GPIO22}; +static const unsigned xrx100_pins_spi_cs3[] = {GPIO13}; +static const unsigned xrx100_pins_spi_cs4[] = {GPIO10}; +static const unsigned xrx100_pins_spi_cs5[] = {GPIO9}; +static const unsigned xrx100_pins_spi_cs6[] = {GPIO11}; + +static const unsigned xrx100_pins_gpt1[] = {GPIO28}; +static const unsigned xrx100_pins_gpt2[] = {GPIO21}; +static const unsigned xrx100_pins_gpt3[] = {GPIO6}; + +static const unsigned xrx100_pins_clkout0[] = {GPIO8}; +static const unsigned xrx100_pins_clkout1[] = {GPIO7}; +static const unsigned xrx100_pins_clkout2[] = {GPIO3}; +static const unsigned xrx100_pins_clkout3[] = {GPIO2}; + +static const unsigned xrx100_pins_pci_gnt1[] = {GPIO30}; +static const unsigned xrx100_pins_pci_gnt2[] = {GPIO23}; +static const unsigned xrx100_pins_pci_gnt3[] = {GPIO19}; +static const unsigned xrx100_pins_pci_gnt4[] = {GPIO38}; +static const unsigned xrx100_pins_pci_req1[] = {GPIO29}; +static const unsigned xrx100_pins_pci_req2[] = {GPIO31}; +static const unsigned xrx100_pins_pci_req3[] = {GPIO3}; +static const unsigned xrx100_pins_pci_req4[] = {GPIO37}; + +static const struct ltq_pin_group xrx100_grps[] = { + GRP_MUX("exin0", EXIN, xrx100_pins_exin0), + GRP_MUX("exin1", EXIN, xrx100_pins_exin1), + GRP_MUX("exin2", EXIN, xrx100_pins_exin2), + GRP_MUX("exin3", EXIN, xrx100_pins_exin3), + GRP_MUX("exin4", EXIN, xrx100_pins_exin4), + GRP_MUX("exin5", EXIN, xrx100_pins_exin5), + GRP_MUX("ebu a23", EBU, xrx100_pins_ebu_a23), + GRP_MUX("ebu a24", EBU, xrx100_pins_ebu_a24), + GRP_MUX("ebu a25", EBU, xrx100_pins_ebu_a25), + GRP_MUX("ebu clk", EBU, xrx100_pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, xrx100_pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, xrx100_pins_ebu_wait), + GRP_MUX("nand ale", EBU, xrx100_pins_nand_ale), + GRP_MUX("nand cs1", EBU, xrx100_pins_nand_cs1), + GRP_MUX("nand cle", EBU, xrx100_pins_nand_cle), + GRP_MUX("nand rdy", EBU, xrx100_pins_nand_rdy), + GRP_MUX("nand rd", EBU, xrx100_pins_nand_rd), + GRP_MUX("spi_di", SPI, xrx100_pins_spi_di), + GRP_MUX("spi_do", SPI, xrx100_pins_spi_do), + GRP_MUX("spi_clk", SPI, xrx100_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, xrx100_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, xrx100_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, xrx100_pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, xrx100_pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, xrx100_pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, xrx100_pins_spi_cs6), + GRP_MUX("asc0", ASC, xrx100_pins_asc0), + GRP_MUX("asc0 cts rts", ASC, xrx100_pins_asc0_cts_rts), + GRP_MUX("stp", STP, xrx100_pins_stp), + GRP_MUX("nmi", NMI, xrx100_pins_nmi), + GRP_MUX("gpt1", GPT, xrx100_pins_gpt1), + GRP_MUX("gpt2", GPT, xrx100_pins_gpt2), + GRP_MUX("gpt3", GPT, xrx100_pins_gpt3), + GRP_MUX("clkout0", CGU, xrx100_pins_clkout0), + GRP_MUX("clkout1", CGU, xrx100_pins_clkout1), + GRP_MUX("clkout2", CGU, xrx100_pins_clkout2), + GRP_MUX("clkout3", CGU, xrx100_pins_clkout3), + GRP_MUX("gnt1", PCI, xrx100_pins_pci_gnt1), + GRP_MUX("gnt2", PCI, xrx100_pins_pci_gnt2), + GRP_MUX("gnt3", PCI, xrx100_pins_pci_gnt3), + GRP_MUX("gnt4", PCI, xrx100_pins_pci_gnt4), + GRP_MUX("req1", PCI, xrx100_pins_pci_req1), + GRP_MUX("req2", PCI, xrx100_pins_pci_req2), + GRP_MUX("req3", PCI, xrx100_pins_pci_req3), + GRP_MUX("req4", PCI, xrx100_pins_pci_req4), + GRP_MUX("mdio", MDIO, xrx100_pins_mdio), + GRP_MUX("dfe led0", DFE, xrx100_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, xrx100_pins_dfe_led1), +}; + +static const char * const xrx100_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "gnt4", + "req1", "req2", + "req3", "req4"}; +static const char * const xrx100_spi_grps[] = {"spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const xrx100_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const xrx100_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd"}; +static const char * const xrx100_exin_grps[] = {"exin0", "exin1", "exin2", + "exin3", "exin4", "exin5"}; +static const char * const xrx100_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const xrx100_asc_grps[] = {"asc0", "asc0 cts rts"}; +static const char * const xrx100_stp_grps[] = {"stp"}; +static const char * const xrx100_nmi_grps[] = {"nmi"}; +static const char * const xrx100_mdio_grps[] = {"mdio"}; +static const char * const xrx100_dfe_grps[] = {"dfe led0", "dfe led1"}; + +static const struct ltq_pmx_func xrx100_funcs[] = { + {"spi", ARRAY_AND_SIZE(xrx100_spi_grps)}, + {"asc", ARRAY_AND_SIZE(xrx100_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(xrx100_cgu_grps)}, + {"exin", ARRAY_AND_SIZE(xrx100_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xrx100_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xrx100_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xrx100_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xrx100_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx100_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx100_mdio_grps)}, + {"dfe", ARRAY_AND_SIZE(xrx100_dfe_grps)}, +}; + +/* --------- xrx200 related code --------- */ +#define XRX200_MAX_PIN 50 + +static const struct ltq_mfp_pin xrx200_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY), + MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), + MFP_XWAY(GPIO4, GPIO, STP, DFE, USIF), + MFP_XWAY(GPIO5, GPIO, STP, GPHY, DFE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, USIF), + MFP_XWAY(GPIO7, GPIO, CGU, CBUS, GPHY), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), + MFP_XWAY(GPIO9, GPIO, USIF, SPI, EXIN), + MFP_XWAY(GPIO10, GPIO, USIF, SPI, EXIN), + MFP_XWAY(GPIO11, GPIO, USIF, CBUS, SPI), + MFP_XWAY(GPIO12, GPIO, USIF, CBUS, MCD), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, CBUS, USIF), + MFP_XWAY(GPIO15, GPIO, SPI, SDIO, MCD), + MFP_XWAY(GPIO16, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO17, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO18, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO19, GPIO, PCI, SDIO, CGU), + MFP_XWAY(GPIO20, GPIO, NONE, SDIO, EBU), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, CGU, EBU), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, SDIO, USIF), + MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), + MFP_XWAY(GPIO27, GPIO, TDM, SDIO, USIF), + MFP_XWAY(GPIO28, GPIO, GPT, PCI, SDIO), + MFP_XWAY(GPIO29, GPIO, PCI, CBUS, EXIN), + MFP_XWAY(GPIO30, GPIO, PCI, CBUS, NONE), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), + MFP_XWAY(GPIO32, GPIO, MII, NONE, EBU), + MFP_XWAY(GPIO33, GPIO, MII, NONE, EBU), + MFP_XWAY(GPIO34, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO35, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO36, GPIO, SIN, SSI, EXIN), + MFP_XWAY(GPIO37, GPIO, USIF, NONE, PCI), + MFP_XWAY(GPIO38, GPIO, PCI, USIF, NONE), + MFP_XWAY(GPIO39, GPIO, USIF, EXIN, NONE), + MFP_XWAY(GPIO40, GPIO, MII, TDM, NONE), + MFP_XWAY(GPIO41, GPIO, MII, TDM, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, GPIO, MII, SIN, GPHY), + MFP_XWAY(GPIO45, GPIO, MII, GPHY, SIN), + MFP_XWAY(GPIO46, GPIO, MII, NONE, EXIN), + MFP_XWAY(GPIO47, GPIO, MII, GPHY, SIN), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), +}; + +static const unsigned xrx200_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9}; + +static const unsigned xrx200_pins_exin0[] = {GPIO0}; +static const unsigned xrx200_pins_exin1[] = {GPIO1}; +static const unsigned xrx200_pins_exin2[] = {GPIO2}; +static const unsigned xrx200_pins_exin3[] = {GPIO39}; +static const unsigned xrx200_pins_exin4[] = {GPIO10}; +static const unsigned xrx200_pins_exin5[] = {GPIO9}; + +static const unsigned xrx200_pins_usif_uart_rx[] = {GPIO11}; +static const unsigned xrx200_pins_usif_uart_tx[] = {GPIO12}; +static const unsigned xrx200_pins_usif_uart_rts[] = {GPIO9}; +static const unsigned xrx200_pins_usif_uart_cts[] = {GPIO10}; +static const unsigned xrx200_pins_usif_uart_dtr[] = {GPIO4}; +static const unsigned xrx200_pins_usif_uart_dsr[] = {GPIO6}; +static const unsigned xrx200_pins_usif_uart_dcd[] = {GPIO25}; +static const unsigned xrx200_pins_usif_uart_ri[] = {GPIO27}; + +static const unsigned xrx200_pins_usif_spi_di[] = {GPIO11}; +static const unsigned xrx200_pins_usif_spi_do[] = {GPIO12}; +static const unsigned xrx200_pins_usif_spi_clk[] = {GPIO38}; +static const unsigned xrx200_pins_usif_spi_cs0[] = {GPIO37}; +static const unsigned xrx200_pins_usif_spi_cs1[] = {GPIO39}; +static const unsigned xrx200_pins_usif_spi_cs2[] = {GPIO14}; + +static const unsigned xrx200_pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned xrx200_pins_nmi[] = {GPIO8}; +static const unsigned xrx200_pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned xrx200_pins_dfe_led0[] = {GPIO4}; +static const unsigned xrx200_pins_dfe_led1[] = {GPIO5}; + +static const unsigned xrx200_pins_gphy0_led0[] = {GPIO5}; +static const unsigned xrx200_pins_gphy0_led1[] = {GPIO7}; +static const unsigned xrx200_pins_gphy0_led2[] = {GPIO2}; +static const unsigned xrx200_pins_gphy1_led0[] = {GPIO44}; +static const unsigned xrx200_pins_gphy1_led1[] = {GPIO45}; +static const unsigned xrx200_pins_gphy1_led2[] = {GPIO47}; + +static const unsigned xrx200_pins_ebu_a24[] = {GPIO13}; +static const unsigned xrx200_pins_ebu_clk[] = {GPIO21}; +static const unsigned xrx200_pins_ebu_cs1[] = {GPIO23}; +static const unsigned xrx200_pins_ebu_a23[] = {GPIO24}; +static const unsigned xrx200_pins_ebu_wait[] = {GPIO26}; +static const unsigned xrx200_pins_ebu_a25[] = {GPIO31}; + +static const unsigned xrx200_pins_nand_ale[] = {GPIO13}; +static const unsigned xrx200_pins_nand_cs1[] = {GPIO23}; +static const unsigned xrx200_pins_nand_cle[] = {GPIO24}; +static const unsigned xrx200_pins_nand_rdy[] = {GPIO48}; +static const unsigned xrx200_pins_nand_rd[] = {GPIO49}; + +static const unsigned xrx200_pins_spi_di[] = {GPIO16}; +static const unsigned xrx200_pins_spi_do[] = {GPIO17}; +static const unsigned xrx200_pins_spi_clk[] = {GPIO18}; +static const unsigned xrx200_pins_spi_cs1[] = {GPIO15}; +static const unsigned xrx200_pins_spi_cs2[] = {GPIO22}; +static const unsigned xrx200_pins_spi_cs3[] = {GPIO13}; +static const unsigned xrx200_pins_spi_cs4[] = {GPIO10}; +static const unsigned xrx200_pins_spi_cs5[] = {GPIO9}; +static const unsigned xrx200_pins_spi_cs6[] = {GPIO11}; + +static const unsigned xrx200_pins_gpt1[] = {GPIO28}; +static const unsigned xrx200_pins_gpt2[] = {GPIO21}; +static const unsigned xrx200_pins_gpt3[] = {GPIO6}; + +static const unsigned xrx200_pins_clkout0[] = {GPIO8}; +static const unsigned xrx200_pins_clkout1[] = {GPIO7}; +static const unsigned xrx200_pins_clkout2[] = {GPIO3}; +static const unsigned xrx200_pins_clkout3[] = {GPIO2}; + +static const unsigned xrx200_pins_pci_gnt1[] = {GPIO28}; +static const unsigned xrx200_pins_pci_gnt2[] = {GPIO23}; +static const unsigned xrx200_pins_pci_gnt3[] = {GPIO19}; +static const unsigned xrx200_pins_pci_gnt4[] = {GPIO38}; +static const unsigned xrx200_pins_pci_req1[] = {GPIO29}; +static const unsigned xrx200_pins_pci_req2[] = {GPIO31}; +static const unsigned xrx200_pins_pci_req3[] = {GPIO3}; +static const unsigned xrx200_pins_pci_req4[] = {GPIO37}; + +static const struct ltq_pin_group xrx200_grps[] = { + GRP_MUX("exin0", EXIN, xrx200_pins_exin0), + GRP_MUX("exin1", EXIN, xrx200_pins_exin1), + GRP_MUX("exin2", EXIN, xrx200_pins_exin2), + GRP_MUX("exin3", EXIN, xrx200_pins_exin3), + GRP_MUX("exin4", EXIN, xrx200_pins_exin4), + GRP_MUX("exin5", EXIN, xrx200_pins_exin5), + GRP_MUX("ebu a23", EBU, xrx200_pins_ebu_a23), + GRP_MUX("ebu a24", EBU, xrx200_pins_ebu_a24), + GRP_MUX("ebu a25", EBU, xrx200_pins_ebu_a25), + GRP_MUX("ebu clk", EBU, xrx200_pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, xrx200_pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, xrx200_pins_ebu_wait), + GRP_MUX("nand ale", EBU, xrx200_pins_nand_ale), + GRP_MUX("nand cs1", EBU, xrx200_pins_nand_cs1), + GRP_MUX("nand cle", EBU, xrx200_pins_nand_cle), + GRP_MUX("nand rdy", EBU, xrx200_pins_nand_rdy), + GRP_MUX("nand rd", EBU, xrx200_pins_nand_rd), + GRP_MUX("spi_di", SPI, xrx200_pins_spi_di), + GRP_MUX("spi_do", SPI, xrx200_pins_spi_do), + GRP_MUX("spi_clk", SPI, xrx200_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, xrx200_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, xrx200_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, xrx200_pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, xrx200_pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6), + GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx), + GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx), + GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts), + GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts), + GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr), + GRP_MUX("usif uart_dsr", USIF, xrx200_pins_usif_uart_dsr), + GRP_MUX("usif uart_dcd", USIF, xrx200_pins_usif_uart_dcd), + GRP_MUX("usif uart_ri", USIF, xrx200_pins_usif_uart_ri), + GRP_MUX("usif spi_di", USIF, xrx200_pins_usif_spi_di), + GRP_MUX("usif spi_do", USIF, xrx200_pins_usif_spi_do), + GRP_MUX("usif spi_clk", USIF, xrx200_pins_usif_spi_clk), + GRP_MUX("usif spi_cs0", USIF, xrx200_pins_usif_spi_cs0), + GRP_MUX("usif spi_cs1", USIF, xrx200_pins_usif_spi_cs1), + GRP_MUX("usif spi_cs2", USIF, xrx200_pins_usif_spi_cs2), + GRP_MUX("stp", STP, xrx200_pins_stp), + GRP_MUX("nmi", NMI, xrx200_pins_nmi), + GRP_MUX("gpt1", GPT, xrx200_pins_gpt1), + GRP_MUX("gpt2", GPT, xrx200_pins_gpt2), + GRP_MUX("gpt3", GPT, xrx200_pins_gpt3), + GRP_MUX("clkout0", CGU, xrx200_pins_clkout0), + GRP_MUX("clkout1", CGU, xrx200_pins_clkout1), + GRP_MUX("clkout2", CGU, xrx200_pins_clkout2), + GRP_MUX("clkout3", CGU, xrx200_pins_clkout3), + GRP_MUX("gnt1", PCI, xrx200_pins_pci_gnt1), + GRP_MUX("gnt2", PCI, xrx200_pins_pci_gnt2), + GRP_MUX("gnt3", PCI, xrx200_pins_pci_gnt3), + GRP_MUX("gnt4", PCI, xrx200_pins_pci_gnt4), + GRP_MUX("req1", PCI, xrx200_pins_pci_req1), + GRP_MUX("req2", PCI, xrx200_pins_pci_req2), + GRP_MUX("req3", PCI, xrx200_pins_pci_req3), + GRP_MUX("req4", PCI, xrx200_pins_pci_req4), + GRP_MUX("mdio", MDIO, xrx200_pins_mdio), + GRP_MUX("dfe led0", DFE, xrx200_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, xrx200_pins_dfe_led1), + GRP_MUX("gphy0 led0", GPHY, xrx200_pins_gphy0_led0), + GRP_MUX("gphy0 led1", GPHY, xrx200_pins_gphy0_led1), + GRP_MUX("gphy0 led2", GPHY, xrx200_pins_gphy0_led2), + GRP_MUX("gphy1 led0", GPHY, xrx200_pins_gphy1_led0), + GRP_MUX("gphy1 led1", GPHY, xrx200_pins_gphy1_led1), + GRP_MUX("gphy1 led2", GPHY, xrx200_pins_gphy1_led2), +}; + +static const char * const xrx200_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "gnt4", + "req1", "req2", + "req3", "req4"}; +static const char * const xrx200_spi_grps[] = {"spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const xrx200_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const xrx200_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd"}; +static const char * const xrx200_exin_grps[] = {"exin0", "exin1", "exin2", + "exin3", "exin4", "exin5"}; +static const char * const xrx200_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const xrx200_usif_grps[] = {"usif uart_rx", "usif uart_tx", + "usif uart_rts", "usif uart_cts", + "usif uart_dtr", "usif uart_dsr", + "usif uart_dcd", "usif uart_ri", + "usif spi_di", "usif spi_do", + "usif spi_clk", "usif spi_cs0", + "usif spi_cs1", "usif spi_cs2"}; +static const char * const xrx200_stp_grps[] = {"stp"}; +static const char * const xrx200_nmi_grps[] = {"nmi"}; +static const char * const xrx200_mdio_grps[] = {"mdio"}; +static const char * const xrx200_dfe_grps[] = {"dfe led0", "dfe led1"}; +static const char * const xrx200_gphy_grps[] = {"gphy0 led0", "gphy0 led1", + "gphy0 led2", "gphy1 led0", + "gphy1 led1", "gphy1 led2"}; + +static const struct ltq_pmx_func xrx200_funcs[] = { + {"spi", ARRAY_AND_SIZE(xrx200_spi_grps)}, + {"usif", ARRAY_AND_SIZE(xrx200_usif_grps)}, + {"cgu", ARRAY_AND_SIZE(xrx200_cgu_grps)}, + {"exin", ARRAY_AND_SIZE(xrx200_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xrx200_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xrx200_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xrx200_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xrx200_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx200_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx200_mdio_grps)}, + {"dfe", ARRAY_AND_SIZE(xrx200_dfe_grps)}, + {"gphy", ARRAY_AND_SIZE(xrx200_gphy_grps)}, +}; + +/* --------- xrx300 related code --------- */ +#define XRX300_MAX_PIN 64 + +static const struct ltq_mfp_pin xrx300_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, EPHY, NONE), + MFP_XWAY(GPIO1, GPIO, NONE, EXIN, NONE), + MFP_XWAY(GPIO2, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO3, GPIO, CGU, NONE, NONE), + MFP_XWAY(GPIO4, GPIO, STP, DFE, NONE), + MFP_XWAY(GPIO5, GPIO, STP, EPHY, DFE), + MFP_XWAY(GPIO6, GPIO, STP, NONE, NONE), + MFP_XWAY(GPIO7, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO8, GPIO, CGU, GPHY, EPHY), + MFP_XWAY(GPIO9, GPIO, WIFI, NONE, EXIN), + MFP_XWAY(GPIO10, GPIO, USIF, SPI, EXIN), + MFP_XWAY(GPIO11, GPIO, USIF, WIFI, SPI), + MFP_XWAY(GPIO12, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO13, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, USIF, EPHY), + MFP_XWAY(GPIO15, GPIO, SPI, NONE, MCD), + MFP_XWAY(GPIO16, GPIO, SPI, EXIN, NONE), + MFP_XWAY(GPIO17, GPIO, SPI, NONE, NONE), + MFP_XWAY(GPIO18, GPIO, SPI, NONE, NONE), + MFP_XWAY(GPIO19, GPIO, USIF, NONE, EPHY), + MFP_XWAY(GPIO20, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO21, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO22, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO23, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO24, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO25, GPIO, TDM, NONE, NONE), + MFP_XWAY(GPIO26, GPIO, TDM, NONE, NONE), + MFP_XWAY(GPIO27, GPIO, TDM, NONE, NONE), + MFP_XWAY(GPIO28, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO29, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO30, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO31, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO32, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO33, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO34, GPIO, NONE, SSI, NONE), + MFP_XWAY(GPIO35, GPIO, NONE, SSI, NONE), + MFP_XWAY(GPIO36, GPIO, NONE, SSI, NONE), + MFP_XWAY(GPIO37, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO38, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO39, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO40, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO41, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO45, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO46, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO47, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO50, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO51, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO52, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO53, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO54, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO55, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO56, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO57, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO58, GPIO, EBU, TDM, NONE), + MFP_XWAY(GPIO59, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO60, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO61, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO62, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO63, NONE, NONE, NONE, NONE), +}; + +static const unsigned xrx300_exin_pin_map[] = {GPIO0, GPIO1, GPIO16, GPIO10, GPIO9}; + +static const unsigned xrx300_pins_exin0[] = {GPIO0}; +static const unsigned xrx300_pins_exin1[] = {GPIO1}; +static const unsigned xrx300_pins_exin2[] = {GPIO16}; +/* EXIN3 is not available on xrX300 */ +static const unsigned xrx300_pins_exin4[] = {GPIO10}; +static const unsigned xrx300_pins_exin5[] = {GPIO9}; + +static const unsigned xrx300_pins_usif_uart_rx[] = {GPIO11}; +static const unsigned xrx300_pins_usif_uart_tx[] = {GPIO10}; + +static const unsigned xrx300_pins_usif_spi_di[] = {GPIO11}; +static const unsigned xrx300_pins_usif_spi_do[] = {GPIO10}; +static const unsigned xrx300_pins_usif_spi_clk[] = {GPIO19}; +static const unsigned xrx300_pins_usif_spi_cs0[] = {GPIO14}; + +static const unsigned xrx300_pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned xrx300_pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned xrx300_pins_dfe_led0[] = {GPIO4}; +static const unsigned xrx300_pins_dfe_led1[] = {GPIO5}; + +static const unsigned xrx300_pins_ephy0_led0[] = {GPIO5}; +static const unsigned xrx300_pins_ephy0_led1[] = {GPIO8}; +static const unsigned xrx300_pins_ephy1_led0[] = {GPIO14}; +static const unsigned xrx300_pins_ephy1_led1[] = {GPIO19}; + +static const unsigned xrx300_pins_nand_ale[] = {GPIO13}; +static const unsigned xrx300_pins_nand_cs1[] = {GPIO23}; +static const unsigned xrx300_pins_nand_cle[] = {GPIO24}; +static const unsigned xrx300_pins_nand_rdy[] = {GPIO48}; +static const unsigned xrx300_pins_nand_rd[] = {GPIO49}; +static const unsigned xrx300_pins_nand_d1[] = {GPIO50}; +static const unsigned xrx300_pins_nand_d0[] = {GPIO51}; +static const unsigned xrx300_pins_nand_d2[] = {GPIO52}; +static const unsigned xrx300_pins_nand_d7[] = {GPIO53}; +static const unsigned xrx300_pins_nand_d6[] = {GPIO54}; +static const unsigned xrx300_pins_nand_d5[] = {GPIO55}; +static const unsigned xrx300_pins_nand_d4[] = {GPIO56}; +static const unsigned xrx300_pins_nand_d3[] = {GPIO57}; +static const unsigned xrx300_pins_nand_cs0[] = {GPIO58}; +static const unsigned xrx300_pins_nand_wr[] = {GPIO59}; +static const unsigned xrx300_pins_nand_wp[] = {GPIO60}; +static const unsigned xrx300_pins_nand_se[] = {GPIO61}; + +static const unsigned xrx300_pins_spi_di[] = {GPIO16}; +static const unsigned xrx300_pins_spi_do[] = {GPIO17}; +static const unsigned xrx300_pins_spi_clk[] = {GPIO18}; +static const unsigned xrx300_pins_spi_cs1[] = {GPIO15}; +/* SPI_CS2 is not available on xrX300 */ +/* SPI_CS3 is not available on xrX300 */ +static const unsigned xrx300_pins_spi_cs4[] = {GPIO10}; +/* SPI_CS5 is not available on xrX300 */ +static const unsigned xrx300_pins_spi_cs6[] = {GPIO11}; + +/* CLKOUT0 is not available on xrX300 */ +/* CLKOUT1 is not available on xrX300 */ +static const unsigned xrx300_pins_clkout2[] = {GPIO3}; + +static const struct ltq_pin_group xrx300_grps[] = { + GRP_MUX("exin0", EXIN, xrx300_pins_exin0), + GRP_MUX("exin1", EXIN, xrx300_pins_exin1), + GRP_MUX("exin2", EXIN, xrx300_pins_exin2), + GRP_MUX("exin4", EXIN, xrx300_pins_exin4), + GRP_MUX("exin5", EXIN, xrx300_pins_exin5), + GRP_MUX("nand ale", EBU, xrx300_pins_nand_ale), + GRP_MUX("nand cs1", EBU, xrx300_pins_nand_cs1), + GRP_MUX("nand cle", EBU, xrx300_pins_nand_cle), + GRP_MUX("nand rdy", EBU, xrx300_pins_nand_rdy), + GRP_MUX("nand rd", EBU, xrx300_pins_nand_rd), + GRP_MUX("nand d1", EBU, xrx300_pins_nand_d1), + GRP_MUX("nand d0", EBU, xrx300_pins_nand_d0), + GRP_MUX("nand d2", EBU, xrx300_pins_nand_d2), + GRP_MUX("nand d7", EBU, xrx300_pins_nand_d7), + GRP_MUX("nand d6", EBU, xrx300_pins_nand_d6), + GRP_MUX("nand d5", EBU, xrx300_pins_nand_d5), + GRP_MUX("nand d4", EBU, xrx300_pins_nand_d4), + GRP_MUX("nand d3", EBU, xrx300_pins_nand_d3), + GRP_MUX("nand cs0", EBU, xrx300_pins_nand_cs0), + GRP_MUX("nand wr", EBU, xrx300_pins_nand_wr), + GRP_MUX("nand wp", EBU, xrx300_pins_nand_wp), + GRP_MUX("nand se", EBU, xrx300_pins_nand_se), + GRP_MUX("spi_di", SPI, xrx300_pins_spi_di), + GRP_MUX("spi_do", SPI, xrx300_pins_spi_do), + GRP_MUX("spi_clk", SPI, xrx300_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, xrx300_pins_spi_cs1), + GRP_MUX("spi_cs4", SPI, xrx300_pins_spi_cs4), + GRP_MUX("spi_cs6", SPI, xrx300_pins_spi_cs6), + GRP_MUX("usif uart_rx", USIF, xrx300_pins_usif_uart_rx), + GRP_MUX("usif uart_tx", USIF, xrx300_pins_usif_uart_tx), + GRP_MUX("usif spi_di", USIF, xrx300_pins_usif_spi_di), + GRP_MUX("usif spi_do", USIF, xrx300_pins_usif_spi_do), + GRP_MUX("usif spi_clk", USIF, xrx300_pins_usif_spi_clk), + GRP_MUX("usif spi_cs0", USIF, xrx300_pins_usif_spi_cs0), + GRP_MUX("stp", STP, xrx300_pins_stp), + GRP_MUX("clkout2", CGU, xrx300_pins_clkout2), + GRP_MUX("mdio", MDIO, xrx300_pins_mdio), + GRP_MUX("dfe led0", DFE, xrx300_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, xrx300_pins_dfe_led1), + GRP_MUX("ephy0 led0", GPHY, xrx300_pins_ephy0_led0), + GRP_MUX("ephy0 led1", GPHY, xrx300_pins_ephy0_led1), + GRP_MUX("ephy1 led0", GPHY, xrx300_pins_ephy1_led0), + GRP_MUX("ephy1 led1", GPHY, xrx300_pins_ephy1_led1), +}; + +static const char * const xrx300_spi_grps[] = {"spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs4", "spi_cs6"}; +static const char * const xrx300_cgu_grps[] = {"clkout2"}; +static const char * const xrx300_ebu_grps[] = {"nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd", "nand d1", + "nand d0", "nand d2", + "nand d7", "nand d6", + "nand d5", "nand d4", + "nand d3", "nand cs0", + "nand wr", "nand wp", + "nand se"}; +static const char * const xrx300_exin_grps[] = {"exin0", "exin1", "exin2", + "exin4", "exin5"}; +static const char * const xrx300_usif_grps[] = {"usif uart_rx", "usif uart_tx", + "usif spi_di", "usif spi_do", + "usif spi_clk", "usif spi_cs0"}; +static const char * const xrx300_stp_grps[] = {"stp"}; +static const char * const xrx300_mdio_grps[] = {"mdio"}; +static const char * const xrx300_dfe_grps[] = {"dfe led0", "dfe led1"}; +static const char * const xrx300_gphy_grps[] = {"ephy0 led0", "ephy0 led1", + "ephy1 led0", "ephy1 led1"}; + +static const struct ltq_pmx_func xrx300_funcs[] = { + {"spi", ARRAY_AND_SIZE(xrx300_spi_grps)}, + {"usif", ARRAY_AND_SIZE(xrx300_usif_grps)}, + {"cgu", ARRAY_AND_SIZE(xrx300_cgu_grps)}, + {"exin", ARRAY_AND_SIZE(xrx300_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xrx300_stp_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx300_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx300_mdio_grps)}, + {"dfe", ARRAY_AND_SIZE(xrx300_dfe_grps)}, + {"ephy", ARRAY_AND_SIZE(xrx300_gphy_grps)}, +}; + /* --------- pinconf related code --------- */ static int xway_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin, @@ -695,10 +1582,7 @@ static struct gpio_chip xway_chip = { /* --------- register the pinctrl layer --------- */ -static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; -static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0}; - -static struct pinctrl_xway_soc { +struct pinctrl_xway_soc { int pin_count; const struct ltq_mfp_pin *mfp; const struct ltq_pin_group *grps; @@ -707,22 +1591,54 @@ static struct pinctrl_xway_soc { unsigned int num_funcs; const unsigned *exin; unsigned int num_exin; -} soc_cfg[] = { - /* legacy xway */ - {XWAY_MAX_PIN, xway_mfp, - xway_grps, ARRAY_SIZE(xway_grps), - danube_funcs, ARRAY_SIZE(danube_funcs), - xway_exin_pin_map, 3}, - /* xway xr9 series */ - {XR9_MAX_PIN, xway_mfp, - xway_grps, ARRAY_SIZE(xway_grps), - xrx_funcs, ARRAY_SIZE(xrx_funcs), - xway_exin_pin_map, 6}, - /* xway ase series */ - {XWAY_MAX_PIN, ase_mfp, - ase_grps, ARRAY_SIZE(ase_grps), - ase_funcs, ARRAY_SIZE(ase_funcs), - ase_exin_pins_map, 3}, +}; + +/* xway xr9 series (DEPRECATED: Use XWAY xRX100/xRX200 Family) */ +static struct pinctrl_xway_soc xr9_pinctrl = { + XR9_MAX_PIN, xway_mfp, + xway_grps, ARRAY_SIZE(xway_grps), + xrx_funcs, ARRAY_SIZE(xrx_funcs), + xway_exin_pin_map, 6 +}; + +/* XWAY AMAZON Family */ +static struct pinctrl_xway_soc ase_pinctrl = { + ASE_MAX_PIN, ase_mfp, + ase_grps, ARRAY_SIZE(ase_grps), + ase_funcs, ARRAY_SIZE(ase_funcs), + ase_exin_pin_map, 3 +}; + +/* XWAY DANUBE Family */ +static struct pinctrl_xway_soc danube_pinctrl = { + DANUBE_MAX_PIN, danube_mfp, + danube_grps, ARRAY_SIZE(danube_grps), + danube_funcs, ARRAY_SIZE(danube_funcs), + danube_exin_pin_map, 3 +}; + +/* XWAY xRX100 Family */ +static struct pinctrl_xway_soc xrx100_pinctrl = { + XRX100_MAX_PIN, xrx100_mfp, + xrx100_grps, ARRAY_SIZE(xrx100_grps), + xrx100_funcs, ARRAY_SIZE(xrx100_funcs), + xrx100_exin_pin_map, 6 +}; + +/* XWAY xRX200 Family */ +static struct pinctrl_xway_soc xrx200_pinctrl = { + XRX200_MAX_PIN, xrx200_mfp, + xrx200_grps, ARRAY_SIZE(xrx200_grps), + xrx200_funcs, ARRAY_SIZE(xrx200_funcs), + xrx200_exin_pin_map, 6 +}; + +/* XWAY xRX300 Family */ +static struct pinctrl_xway_soc xrx300_pinctrl = { + XRX300_MAX_PIN, xrx300_mfp, + xrx300_grps, ARRAY_SIZE(xrx300_grps), + xrx300_funcs, ARRAY_SIZE(xrx300_funcs), + xrx300_exin_pin_map, 5 }; static struct pinctrl_gpio_range xway_gpio_range = { @@ -731,9 +1647,14 @@ static struct pinctrl_gpio_range xway_gpio_range = { }; static const struct of_device_id xway_match[] = { - { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]}, - { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]}, - { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]}, + { .compatible = "lantiq,pinctrl-xway", .data = &danube_pinctrl}, /*DEPRECATED*/ + { .compatible = "lantiq,pinctrl-xr9", .data = &xr9_pinctrl}, /*DEPRECATED*/ + { .compatible = "lantiq,pinctrl-ase", .data = &ase_pinctrl}, /*DEPRECATED*/ + { .compatible = "lantiq,ase-pinctrl", .data = &ase_pinctrl}, + { .compatible = "lantiq,danube-pinctrl", .data = &danube_pinctrl}, + { .compatible = "lantiq,xrx100-pinctrl", .data = &xrx100_pinctrl}, + { .compatible = "lantiq,xrx200-pinctrl", .data = &xrx200_pinctrl}, + { .compatible = "lantiq,xrx300-pinctrl", .data = &xrx300_pinctrl}, {}, }; MODULE_DEVICE_TABLE(of, xway_match); @@ -755,7 +1676,7 @@ static int pinmux_xway_probe(struct platform_device *pdev) if (match) xway_soc = (const struct pinctrl_xway_soc *) match->data; else - xway_soc = &soc_cfg[0]; + xway_soc = &danube_pinctrl; /* find out how many pads we have */ xway_chip.ngpio = xway_soc->pin_count; -- 2.1.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 2/4] pinctrl/lantiq: introduce new dedicated devicetree bindings @ 2015-11-25 10:18 ` Martin Schiller 0 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-25 10:18 UTC (permalink / raw) To: linux-gpio, devicetree, linux-mips Cc: linus.walleij, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck, Martin Schiller This patch introduces new dedicated "lantiq,<chip>-pinctrl" devicetree bindings, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or "xrx300" and marks the "lantiq,pinctrl-xway", "lantiq,pinctrl-ase" and "lantiq,pinctrl-xr9" bindings as DEPRECATED. Based on the newest Lantiq Hardware Description it turend out, that there are some differences in the GPIO alternative functions of the Danube, xRX100 and xRX200 families, which makes it impossible to use only one xway_mfp table. This patch also adds support for the xRX300 family. Signed-off-by: Martin Schiller <mschiller@tdt.de> --- drivers/pinctrl/pinctrl-lantiq.h | 8 + drivers/pinctrl/pinctrl-xway.c | 1181 +++++++++++++++++++++++++++++++++----- 2 files changed, 1059 insertions(+), 130 deletions(-) diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h index eb89ba0..e137d13 100644 --- a/drivers/pinctrl/pinctrl-lantiq.h +++ b/drivers/pinctrl/pinctrl-lantiq.h @@ -162,6 +162,14 @@ enum ltq_pin { GPIO53, GPIO54, GPIO55, + GPIO56, + GPIO57, + GPIO58, + GPIO59, + GPIO60, /* 60 */ + GPIO61, + GPIO62, + GPIO63, GPIO64, GPIO65, diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index ae724bd..a064962 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -7,6 +7,7 @@ * publishhed by the Free Software Foundation. * * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + * Copyright (C) 2015 Martin Schiller <mschiller@tdt.de> */ #include <linux/err.h> @@ -24,7 +25,7 @@ #include <lantiq_soc.h> -/* we have 3 1/2 banks of 16 bit each */ +/* we have up to 4 banks of 16 bit each */ #define PINS 16 #define PORT3 3 #define PORT(x) (x / PINS) @@ -35,7 +36,7 @@ #define MUX_ALT1 0x2 /* - * each bank has this offset apart from the 1/2 bank that is mixed into the + * each bank has this offset apart from the 4th bank that is mixed into the * other 3 ranges */ #define REG_OFF 0x30 @@ -51,7 +52,7 @@ #define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c) #define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20) -/* the 1/2 port needs special offsets for some registers */ +/* the 4th port needs special offsets for some registers */ #define GPIO3_OD (GPIO_BASE(0) + 0x24) #define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28) #define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C) @@ -80,17 +81,18 @@ #define FUNC_MUX(f, m) \ { .func = f, .mux = XWAY_MUX_##m, } -#define XWAY_MAX_PIN 32 -#define XR9_MAX_PIN 56 - enum xway_mux { XWAY_MUX_GPIO = 0, XWAY_MUX_SPI, XWAY_MUX_ASC, + XWAY_MUX_USIF, XWAY_MUX_PCI, + XWAY_MUX_CBUS, XWAY_MUX_CGU, XWAY_MUX_EBU, + XWAY_MUX_EBU2, XWAY_MUX_JTAG, + XWAY_MUX_MCD, XWAY_MUX_EXIN, XWAY_MUX_TDM, XWAY_MUX_STP, @@ -103,9 +105,15 @@ enum xway_mux { XWAY_MUX_DFE, XWAY_MUX_SDIO, XWAY_MUX_GPHY, + XWAY_MUX_SSI, + XWAY_MUX_WIFI, XWAY_MUX_NONE = 0xffff, }; +/* --------- DEPRECATED: xr9 related code --------- */ +/* ---------- use xrx100/xrx200 instead ---------- */ +#define XR9_MAX_PIN 56 + static const struct ltq_mfp_pin xway_mfp[] = { /* pin f0 f1 f2 f3 */ MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM), @@ -113,7 +121,7 @@ static const struct ltq_mfp_pin xway_mfp[] = { MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY), MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI), MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC), - MFP_XWAY(GPIO5, GPIO, STP, NONE, GPHY), + MFP_XWAY(GPIO5, GPIO, STP, GPHY, NONE), MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), MFP_XWAY(GPIO7, GPIO, CGU, PCI, GPHY), MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), @@ -152,7 +160,7 @@ static const struct ltq_mfp_pin xway_mfp[] = { MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), - MFP_XWAY(GPIO44, GPIO, NONE, GPHY, SIN), + MFP_XWAY(GPIO44, GPIO, NONE, SIN, GPHY), MFP_XWAY(GPIO45, GPIO, NONE, GPHY, SIN), MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), MFP_XWAY(GPIO47, GPIO, NONE, GPHY, SIN), @@ -166,42 +174,6 @@ static const struct ltq_mfp_pin xway_mfp[] = { MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), }; -static const struct ltq_mfp_pin ase_mfp[] = { - /* pin f0 f1 f2 f3 */ - MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), - MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), - MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), - MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), - MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), - MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), - MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), - MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), - MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), - MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), - MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), - MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), - MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), - MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), - MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), - MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), - MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), - MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII), - MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), - MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), - MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII), - MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), - MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), - MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), -}; - static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35}; static const unsigned pins_asc0[] = {GPIO11, GPIO12}; static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10}; @@ -231,6 +203,8 @@ static const unsigned pins_nand_cle[] = {GPIO24}; static const unsigned pins_nand_rdy[] = {GPIO48}; static const unsigned pins_nand_rd[] = {GPIO49}; +static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; + static const unsigned pins_exin0[] = {GPIO0}; static const unsigned pins_exin1[] = {GPIO1}; static const unsigned pins_exin2[] = {GPIO2}; @@ -240,7 +214,7 @@ static const unsigned pins_exin5[] = {GPIO9}; static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18}; static const unsigned pins_spi_cs1[] = {GPIO15}; -static const unsigned pins_spi_cs2[] = {GPIO21}; +static const unsigned pins_spi_cs2[] = {GPIO22}; static const unsigned pins_spi_cs3[] = {GPIO13}; static const unsigned pins_spi_cs4[] = {GPIO10}; static const unsigned pins_spi_cs5[] = {GPIO9}; @@ -264,25 +238,6 @@ static const unsigned pins_pci_req2[] = {GPIO31}; static const unsigned pins_pci_req3[] = {GPIO3}; static const unsigned pins_pci_req4[] = {GPIO37}; -static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; -static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; -static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; -static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4}; -static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2}; - -static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; -static const unsigned ase_pins_spi_cs1[] = {GPIO7}; -static const unsigned ase_pins_spi_cs2[] = {GPIO15}; -static const unsigned ase_pins_spi_cs3[] = {GPIO14}; - -static const unsigned ase_pins_exin0[] = {GPIO6}; -static const unsigned ase_pins_exin1[] = {GPIO29}; -static const unsigned ase_pins_exin2[] = {GPIO0}; - -static const unsigned ase_pins_gpt1[] = {GPIO5}; -static const unsigned ase_pins_gpt2[] = {GPIO4}; -static const unsigned ase_pins_gpt3[] = {GPIO25}; - static const struct ltq_pin_group xway_grps[] = { GRP_MUX("exin0", EXIN, pins_exin0), GRP_MUX("exin1", EXIN, pins_exin1), @@ -338,24 +293,6 @@ static const struct ltq_pin_group xway_grps[] = { GRP_MUX("gphy1 led2", GPHY, pins_gphy1_led2), }; -static const struct ltq_pin_group ase_grps[] = { - GRP_MUX("exin0", EXIN, ase_pins_exin0), - GRP_MUX("exin1", EXIN, ase_pins_exin1), - GRP_MUX("exin2", EXIN, ase_pins_exin2), - GRP_MUX("jtag", JTAG, ase_pins_jtag), - GRP_MUX("stp", STP, ase_pins_stp), - GRP_MUX("asc", ASC, ase_pins_asc), - GRP_MUX("gpt1", GPT, ase_pins_gpt1), - GRP_MUX("gpt2", GPT, ase_pins_gpt2), - GRP_MUX("gpt3", GPT, ase_pins_gpt3), - GRP_MUX("ephy", EPHY, ase_pins_ephy), - GRP_MUX("dfe", DFE, ase_pins_dfe), - GRP_MUX("spi", SPI, ase_pins_spi), - GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), - GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), - GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), -}; - static const char * const xway_pci_grps[] = {"gnt1", "gnt2", "gnt3", "req1", "req2", "req3"}; @@ -395,30 +332,6 @@ static const char * const xrx_pci_grps[] = {"gnt1", "gnt2", "req1", "req2", "req3", "req4"}; -/* ase */ -static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; -static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; -static const char * const ase_dfe_grps[] = {"dfe"}; -static const char * const ase_ephy_grps[] = {"ephy"}; -static const char * const ase_asc_grps[] = {"asc"}; -static const char * const ase_jtag_grps[] = {"jtag"}; -static const char * const ase_stp_grps[] = {"stp"}; -static const char * const ase_spi_grps[] = {"spi", "spi_cs1", - "spi_cs2", "spi_cs3"}; - -static const struct ltq_pmx_func danube_funcs[] = { - {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, - {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, - {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, - {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, - {"exin", ARRAY_AND_SIZE(xway_exin_grps)}, - {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, - {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, - {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, - {"pci", ARRAY_AND_SIZE(xway_pci_grps)}, - {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)}, -}; - static const struct ltq_pmx_func xrx_funcs[] = { {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, @@ -434,17 +347,991 @@ static const struct ltq_pmx_func xrx_funcs[] = { {"gphy", ARRAY_AND_SIZE(xrx_gphy_grps)}, }; +/* --------- ase related code --------- */ +#define ASE_MAX_PIN 32 + +static const struct ltq_mfp_pin ase_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), + MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), + MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), + MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), + MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), + MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), + MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), + MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), + MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), + MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), + MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO21, GPIO, EBU, MII, EBU2), + MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO24, GPIO, EBU, EBU2, MDIO), + MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), + MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO27, GPIO, EBU, NONE, MDIO), + MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), + MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), + MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), +}; + +static const unsigned ase_exin_pin_map[] = {GPIO6, GPIO29, GPIO0}; + +static const unsigned ase_pins_exin0[] = {GPIO6}; +static const unsigned ase_pins_exin1[] = {GPIO29}; +static const unsigned ase_pins_exin2[] = {GPIO0}; + +static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; +static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; +static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; +static const unsigned ase_pins_mdio[] = {GPIO24, GPIO27}; +static const unsigned ase_pins_ephy_led0[] = {GPIO2}; +static const unsigned ase_pins_ephy_led1[] = {GPIO3}; +static const unsigned ase_pins_ephy_led2[] = {GPIO4}; +static const unsigned ase_pins_dfe_led0[] = {GPIO1}; +static const unsigned ase_pins_dfe_led1[] = {GPIO2}; + +static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; /* DEPRECATED */ +static const unsigned ase_pins_spi_di[] = {GPIO8}; +static const unsigned ase_pins_spi_do[] = {GPIO9}; +static const unsigned ase_pins_spi_clk[] = {GPIO10}; +static const unsigned ase_pins_spi_cs1[] = {GPIO7}; +static const unsigned ase_pins_spi_cs2[] = {GPIO15}; +static const unsigned ase_pins_spi_cs3[] = {GPIO14}; + +static const unsigned ase_pins_gpt1[] = {GPIO5}; +static const unsigned ase_pins_gpt2[] = {GPIO4}; +static const unsigned ase_pins_gpt3[] = {GPIO25}; + +static const unsigned ase_pins_clkout0[] = {GPIO23}; +static const unsigned ase_pins_clkout1[] = {GPIO22}; +static const unsigned ase_pins_clkout2[] = {GPIO14}; + +static const struct ltq_pin_group ase_grps[] = { + GRP_MUX("exin0", EXIN, ase_pins_exin0), + GRP_MUX("exin1", EXIN, ase_pins_exin1), + GRP_MUX("exin2", EXIN, ase_pins_exin2), + GRP_MUX("jtag", JTAG, ase_pins_jtag), + GRP_MUX("spi", SPI, ase_pins_spi), /* DEPRECATED */ + GRP_MUX("spi_di", SPI, ase_pins_spi_di), + GRP_MUX("spi_do", SPI, ase_pins_spi_do), + GRP_MUX("spi_clk", SPI, ase_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), + GRP_MUX("asc", ASC, ase_pins_asc), + GRP_MUX("stp", STP, ase_pins_stp), + GRP_MUX("gpt1", GPT, ase_pins_gpt1), + GRP_MUX("gpt2", GPT, ase_pins_gpt2), + GRP_MUX("gpt3", GPT, ase_pins_gpt3), + GRP_MUX("clkout0", CGU, ase_pins_clkout0), + GRP_MUX("clkout1", CGU, ase_pins_clkout1), + GRP_MUX("clkout2", CGU, ase_pins_clkout2), + GRP_MUX("mdio", MDIO, ase_pins_mdio), + GRP_MUX("dfe led0", DFE, ase_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, ase_pins_dfe_led1), + GRP_MUX("ephy led0", EPHY, ase_pins_ephy_led0), + GRP_MUX("ephy led1", EPHY, ase_pins_ephy_led1), + GRP_MUX("ephy led2", EPHY, ase_pins_ephy_led2), +}; + +static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const ase_cgu_grps[] = {"clkout0", "clkout1", + "clkout2"}; +static const char * const ase_mdio_grps[] = {"mdio"}; +static const char * const ase_dfe_grps[] = {"dfe led0", "dfe led1"}; +static const char * const ase_ephy_grps[] = {"ephy led0", "ephy led1", + "ephy led2"}; +static const char * const ase_asc_grps[] = {"asc"}; +static const char * const ase_jtag_grps[] = {"jtag"}; +static const char * const ase_stp_grps[] = {"stp"}; +static const char * const ase_spi_grps[] = {"spi", /* DEPRECATED */ + "spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs2", "spi_cs3"}; + static const struct ltq_pmx_func ase_funcs[] = { {"spi", ARRAY_AND_SIZE(ase_spi_grps)}, {"asc", ARRAY_AND_SIZE(ase_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(ase_cgu_grps)}, {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)}, {"exin", ARRAY_AND_SIZE(ase_exin_grps)}, {"stp", ARRAY_AND_SIZE(ase_stp_grps)}, {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)}, + {"mdio", ARRAY_AND_SIZE(ase_mdio_grps)}, {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)}, {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)}, }; +/* --------- danube related code --------- */ +#define DANUBE_MAX_PIN 32 + +static const struct ltq_mfp_pin danube_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, MII), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, MII), + MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), + MFP_XWAY(GPIO4, GPIO, STP, DFE, ASC), + MFP_XWAY(GPIO5, GPIO, STP, MII, DFE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), + MFP_XWAY(GPIO7, GPIO, CGU, CBUS, MII), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, MII), + MFP_XWAY(GPIO9, GPIO, ASC, SPI, MII), + MFP_XWAY(GPIO10, GPIO, ASC, SPI, MII), + MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI), + MFP_XWAY(GPIO12, GPIO, ASC, CBUS, MCD), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, MII), + MFP_XWAY(GPIO14, GPIO, CGU, CBUS, MII), + MFP_XWAY(GPIO15, GPIO, SPI, SDIO, JTAG), + MFP_XWAY(GPIO16, GPIO, SPI, SDIO, JTAG), + MFP_XWAY(GPIO17, GPIO, SPI, SDIO, JTAG), + MFP_XWAY(GPIO18, GPIO, SPI, SDIO, JTAG), + MFP_XWAY(GPIO19, GPIO, PCI, SDIO, MII), + MFP_XWAY(GPIO20, GPIO, JTAG, SDIO, MII), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, MCD, MII), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, SDIO, ASC), + MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), + MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC), + MFP_XWAY(GPIO28, GPIO, GPT, MII, SDIO), + MFP_XWAY(GPIO29, GPIO, PCI, CBUS, MII), + MFP_XWAY(GPIO30, GPIO, PCI, CBUS, MII), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, MII), +}; + +static const unsigned danube_exin_pin_map[] = {GPIO0, GPIO1, GPIO2}; + +static const unsigned danube_pins_exin0[] = {GPIO0}; +static const unsigned danube_pins_exin1[] = {GPIO1}; +static const unsigned danube_pins_exin2[] = {GPIO2}; + +static const unsigned danube_pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO18, GPIO20}; +static const unsigned danube_pins_asc0[] = {GPIO11, GPIO12}; +static const unsigned danube_pins_asc0_cts_rts[] = {GPIO9, GPIO10}; +static const unsigned danube_pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned danube_pins_nmi[] = {GPIO8}; + +static const unsigned danube_pins_dfe_led0[] = {GPIO4}; +static const unsigned danube_pins_dfe_led1[] = {GPIO5}; + +static const unsigned danube_pins_ebu_a24[] = {GPIO13}; +static const unsigned danube_pins_ebu_clk[] = {GPIO21}; +static const unsigned danube_pins_ebu_cs1[] = {GPIO23}; +static const unsigned danube_pins_ebu_a23[] = {GPIO24}; +static const unsigned danube_pins_ebu_wait[] = {GPIO26}; +static const unsigned danube_pins_ebu_a25[] = {GPIO31}; + +static const unsigned danube_pins_nand_ale[] = {GPIO13}; +static const unsigned danube_pins_nand_cs1[] = {GPIO23}; +static const unsigned danube_pins_nand_cle[] = {GPIO24}; + +static const unsigned danube_pins_spi[] = {GPIO16, GPIO17, GPIO18}; /* DEPRECATED */ +static const unsigned danube_pins_spi_di[] = {GPIO16}; +static const unsigned danube_pins_spi_do[] = {GPIO17}; +static const unsigned danube_pins_spi_clk[] = {GPIO18}; +static const unsigned danube_pins_spi_cs1[] = {GPIO15}; +static const unsigned danube_pins_spi_cs2[] = {GPIO21}; +static const unsigned danube_pins_spi_cs3[] = {GPIO13}; +static const unsigned danube_pins_spi_cs4[] = {GPIO10}; +static const unsigned danube_pins_spi_cs5[] = {GPIO9}; +static const unsigned danube_pins_spi_cs6[] = {GPIO11}; + +static const unsigned danube_pins_gpt1[] = {GPIO28}; +static const unsigned danube_pins_gpt2[] = {GPIO21}; +static const unsigned danube_pins_gpt3[] = {GPIO6}; + +static const unsigned danube_pins_clkout0[] = {GPIO8}; +static const unsigned danube_pins_clkout1[] = {GPIO7}; +static const unsigned danube_pins_clkout2[] = {GPIO3}; +static const unsigned danube_pins_clkout3[] = {GPIO2}; + +static const unsigned danube_pins_pci_gnt1[] = {GPIO30}; +static const unsigned danube_pins_pci_gnt2[] = {GPIO23}; +static const unsigned danube_pins_pci_gnt3[] = {GPIO19}; +static const unsigned danube_pins_pci_req1[] = {GPIO29}; +static const unsigned danube_pins_pci_req2[] = {GPIO31}; +static const unsigned danube_pins_pci_req3[] = {GPIO3}; + +static const struct ltq_pin_group danube_grps[] = { + GRP_MUX("exin0", EXIN, danube_pins_exin0), + GRP_MUX("exin1", EXIN, danube_pins_exin1), + GRP_MUX("exin2", EXIN, danube_pins_exin2), + GRP_MUX("jtag", JTAG, danube_pins_jtag), + GRP_MUX("ebu a23", EBU, danube_pins_ebu_a23), + GRP_MUX("ebu a24", EBU, danube_pins_ebu_a24), + GRP_MUX("ebu a25", EBU, danube_pins_ebu_a25), + GRP_MUX("ebu clk", EBU, danube_pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, danube_pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, danube_pins_ebu_wait), + GRP_MUX("nand ale", EBU, danube_pins_nand_ale), + GRP_MUX("nand cs1", EBU, danube_pins_nand_cs1), + GRP_MUX("nand cle", EBU, danube_pins_nand_cle), + GRP_MUX("spi", SPI, danube_pins_spi), /* DEPRECATED */ + GRP_MUX("spi_di", SPI, danube_pins_spi_di), + GRP_MUX("spi_do", SPI, danube_pins_spi_do), + GRP_MUX("spi_clk", SPI, danube_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, danube_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, danube_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, danube_pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, danube_pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, danube_pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, danube_pins_spi_cs6), + GRP_MUX("asc0", ASC, danube_pins_asc0), + GRP_MUX("asc0 cts rts", ASC, danube_pins_asc0_cts_rts), + GRP_MUX("stp", STP, danube_pins_stp), + GRP_MUX("nmi", NMI, danube_pins_nmi), + GRP_MUX("gpt1", GPT, danube_pins_gpt1), + GRP_MUX("gpt2", GPT, danube_pins_gpt2), + GRP_MUX("gpt3", GPT, danube_pins_gpt3), + GRP_MUX("clkout0", CGU, danube_pins_clkout0), + GRP_MUX("clkout1", CGU, danube_pins_clkout1), + GRP_MUX("clkout2", CGU, danube_pins_clkout2), + GRP_MUX("clkout3", CGU, danube_pins_clkout3), + GRP_MUX("gnt1", PCI, danube_pins_pci_gnt1), + GRP_MUX("gnt2", PCI, danube_pins_pci_gnt2), + GRP_MUX("gnt3", PCI, danube_pins_pci_gnt3), + GRP_MUX("req1", PCI, danube_pins_pci_req1), + GRP_MUX("req2", PCI, danube_pins_pci_req2), + GRP_MUX("req3", PCI, danube_pins_pci_req3), + GRP_MUX("dfe led0", DFE, danube_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, danube_pins_dfe_led1), +}; + +static const char * const danube_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "req1", + "req2", "req3"}; +static const char * const danube_spi_grps[] = {"spi", /* DEPRECATED */ + "spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const danube_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const danube_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle"}; +static const char * const danube_dfe_grps[] = {"dfe led0", "dfe led1"}; +static const char * const danube_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const danube_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const danube_asc_grps[] = {"asc0", "asc0 cts rts"}; +static const char * const danube_jtag_grps[] = {"jtag"}; +static const char * const danube_stp_grps[] = {"stp"}; +static const char * const danube_nmi_grps[] = {"nmi"}; + +static const struct ltq_pmx_func danube_funcs[] = { + {"spi", ARRAY_AND_SIZE(danube_spi_grps)}, + {"asc", ARRAY_AND_SIZE(danube_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(danube_cgu_grps)}, + {"jtag", ARRAY_AND_SIZE(danube_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(danube_exin_grps)}, + {"stp", ARRAY_AND_SIZE(danube_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(danube_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(danube_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(danube_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(danube_ebu_grps)}, + {"dfe", ARRAY_AND_SIZE(danube_dfe_grps)}, +}; + +/* --------- xrx100 related code --------- */ +#define XRX100_MAX_PIN 56 + +static const struct ltq_mfp_pin xrx100_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE), + MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), + MFP_XWAY(GPIO4, GPIO, STP, DFE, ASC), + MFP_XWAY(GPIO5, GPIO, STP, NONE, DFE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), + MFP_XWAY(GPIO7, GPIO, CGU, CBUS, NONE), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), + MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN), + MFP_XWAY(GPIO10, GPIO, ASC, SPI, EXIN), + MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI), + MFP_XWAY(GPIO12, GPIO, ASC, CBUS, MCD), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, NONE, NONE), + MFP_XWAY(GPIO15, GPIO, SPI, SDIO, MCD), + MFP_XWAY(GPIO16, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO17, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO18, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO19, GPIO, PCI, SDIO, CGU), + MFP_XWAY(GPIO20, GPIO, NONE, SDIO, EBU), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, NONE, EBU), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, SDIO, ASC), + MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), + MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC), + MFP_XWAY(GPIO28, GPIO, GPT, NONE, SDIO), + MFP_XWAY(GPIO29, GPIO, PCI, CBUS, NONE), + MFP_XWAY(GPIO30, GPIO, PCI, CBUS, NONE), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), + MFP_XWAY(GPIO32, GPIO, MII, NONE, EBU), + MFP_XWAY(GPIO33, GPIO, MII, NONE, EBU), + MFP_XWAY(GPIO34, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO35, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO36, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO39, GPIO, NONE, EXIN, NONE), + MFP_XWAY(GPIO40, GPIO, MII, TDM, NONE), + MFP_XWAY(GPIO41, GPIO, MII, TDM, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, GPIO, MII, SIN, NONE), + MFP_XWAY(GPIO45, GPIO, MII, NONE, SIN), + MFP_XWAY(GPIO46, GPIO, MII, NONE, EXIN), + MFP_XWAY(GPIO47, GPIO, MII, NONE, SIN), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), +}; + +static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9}; + +static const unsigned xrx100_pins_exin0[] = {GPIO0}; +static const unsigned xrx100_pins_exin1[] = {GPIO1}; +static const unsigned xrx100_pins_exin2[] = {GPIO2}; +static const unsigned xrx100_pins_exin3[] = {GPIO39}; +static const unsigned xrx100_pins_exin4[] = {GPIO10}; +static const unsigned xrx100_pins_exin5[] = {GPIO9}; + +static const unsigned xrx100_pins_asc0[] = {GPIO11, GPIO12}; +static const unsigned xrx100_pins_asc0_cts_rts[] = {GPIO9, GPIO10}; +static const unsigned xrx100_pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned xrx100_pins_nmi[] = {GPIO8}; +static const unsigned xrx100_pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned xrx100_pins_dfe_led0[] = {GPIO4}; +static const unsigned xrx100_pins_dfe_led1[] = {GPIO5}; + +static const unsigned xrx100_pins_ebu_a24[] = {GPIO13}; +static const unsigned xrx100_pins_ebu_clk[] = {GPIO21}; +static const unsigned xrx100_pins_ebu_cs1[] = {GPIO23}; +static const unsigned xrx100_pins_ebu_a23[] = {GPIO24}; +static const unsigned xrx100_pins_ebu_wait[] = {GPIO26}; +static const unsigned xrx100_pins_ebu_a25[] = {GPIO31}; + +static const unsigned xrx100_pins_nand_ale[] = {GPIO13}; +static const unsigned xrx100_pins_nand_cs1[] = {GPIO23}; +static const unsigned xrx100_pins_nand_cle[] = {GPIO24}; +static const unsigned xrx100_pins_nand_rdy[] = {GPIO48}; +static const unsigned xrx100_pins_nand_rd[] = {GPIO49}; + +static const unsigned xrx100_pins_spi_di[] = {GPIO16}; +static const unsigned xrx100_pins_spi_do[] = {GPIO17}; +static const unsigned xrx100_pins_spi_clk[] = {GPIO18}; +static const unsigned xrx100_pins_spi_cs1[] = {GPIO15}; +static const unsigned xrx100_pins_spi_cs2[] = {GPIO22}; +static const unsigned xrx100_pins_spi_cs3[] = {GPIO13}; +static const unsigned xrx100_pins_spi_cs4[] = {GPIO10}; +static const unsigned xrx100_pins_spi_cs5[] = {GPIO9}; +static const unsigned xrx100_pins_spi_cs6[] = {GPIO11}; + +static const unsigned xrx100_pins_gpt1[] = {GPIO28}; +static const unsigned xrx100_pins_gpt2[] = {GPIO21}; +static const unsigned xrx100_pins_gpt3[] = {GPIO6}; + +static const unsigned xrx100_pins_clkout0[] = {GPIO8}; +static const unsigned xrx100_pins_clkout1[] = {GPIO7}; +static const unsigned xrx100_pins_clkout2[] = {GPIO3}; +static const unsigned xrx100_pins_clkout3[] = {GPIO2}; + +static const unsigned xrx100_pins_pci_gnt1[] = {GPIO30}; +static const unsigned xrx100_pins_pci_gnt2[] = {GPIO23}; +static const unsigned xrx100_pins_pci_gnt3[] = {GPIO19}; +static const unsigned xrx100_pins_pci_gnt4[] = {GPIO38}; +static const unsigned xrx100_pins_pci_req1[] = {GPIO29}; +static const unsigned xrx100_pins_pci_req2[] = {GPIO31}; +static const unsigned xrx100_pins_pci_req3[] = {GPIO3}; +static const unsigned xrx100_pins_pci_req4[] = {GPIO37}; + +static const struct ltq_pin_group xrx100_grps[] = { + GRP_MUX("exin0", EXIN, xrx100_pins_exin0), + GRP_MUX("exin1", EXIN, xrx100_pins_exin1), + GRP_MUX("exin2", EXIN, xrx100_pins_exin2), + GRP_MUX("exin3", EXIN, xrx100_pins_exin3), + GRP_MUX("exin4", EXIN, xrx100_pins_exin4), + GRP_MUX("exin5", EXIN, xrx100_pins_exin5), + GRP_MUX("ebu a23", EBU, xrx100_pins_ebu_a23), + GRP_MUX("ebu a24", EBU, xrx100_pins_ebu_a24), + GRP_MUX("ebu a25", EBU, xrx100_pins_ebu_a25), + GRP_MUX("ebu clk", EBU, xrx100_pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, xrx100_pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, xrx100_pins_ebu_wait), + GRP_MUX("nand ale", EBU, xrx100_pins_nand_ale), + GRP_MUX("nand cs1", EBU, xrx100_pins_nand_cs1), + GRP_MUX("nand cle", EBU, xrx100_pins_nand_cle), + GRP_MUX("nand rdy", EBU, xrx100_pins_nand_rdy), + GRP_MUX("nand rd", EBU, xrx100_pins_nand_rd), + GRP_MUX("spi_di", SPI, xrx100_pins_spi_di), + GRP_MUX("spi_do", SPI, xrx100_pins_spi_do), + GRP_MUX("spi_clk", SPI, xrx100_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, xrx100_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, xrx100_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, xrx100_pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, xrx100_pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, xrx100_pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, xrx100_pins_spi_cs6), + GRP_MUX("asc0", ASC, xrx100_pins_asc0), + GRP_MUX("asc0 cts rts", ASC, xrx100_pins_asc0_cts_rts), + GRP_MUX("stp", STP, xrx100_pins_stp), + GRP_MUX("nmi", NMI, xrx100_pins_nmi), + GRP_MUX("gpt1", GPT, xrx100_pins_gpt1), + GRP_MUX("gpt2", GPT, xrx100_pins_gpt2), + GRP_MUX("gpt3", GPT, xrx100_pins_gpt3), + GRP_MUX("clkout0", CGU, xrx100_pins_clkout0), + GRP_MUX("clkout1", CGU, xrx100_pins_clkout1), + GRP_MUX("clkout2", CGU, xrx100_pins_clkout2), + GRP_MUX("clkout3", CGU, xrx100_pins_clkout3), + GRP_MUX("gnt1", PCI, xrx100_pins_pci_gnt1), + GRP_MUX("gnt2", PCI, xrx100_pins_pci_gnt2), + GRP_MUX("gnt3", PCI, xrx100_pins_pci_gnt3), + GRP_MUX("gnt4", PCI, xrx100_pins_pci_gnt4), + GRP_MUX("req1", PCI, xrx100_pins_pci_req1), + GRP_MUX("req2", PCI, xrx100_pins_pci_req2), + GRP_MUX("req3", PCI, xrx100_pins_pci_req3), + GRP_MUX("req4", PCI, xrx100_pins_pci_req4), + GRP_MUX("mdio", MDIO, xrx100_pins_mdio), + GRP_MUX("dfe led0", DFE, xrx100_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, xrx100_pins_dfe_led1), +}; + +static const char * const xrx100_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "gnt4", + "req1", "req2", + "req3", "req4"}; +static const char * const xrx100_spi_grps[] = {"spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const xrx100_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const xrx100_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd"}; +static const char * const xrx100_exin_grps[] = {"exin0", "exin1", "exin2", + "exin3", "exin4", "exin5"}; +static const char * const xrx100_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const xrx100_asc_grps[] = {"asc0", "asc0 cts rts"}; +static const char * const xrx100_stp_grps[] = {"stp"}; +static const char * const xrx100_nmi_grps[] = {"nmi"}; +static const char * const xrx100_mdio_grps[] = {"mdio"}; +static const char * const xrx100_dfe_grps[] = {"dfe led0", "dfe led1"}; + +static const struct ltq_pmx_func xrx100_funcs[] = { + {"spi", ARRAY_AND_SIZE(xrx100_spi_grps)}, + {"asc", ARRAY_AND_SIZE(xrx100_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(xrx100_cgu_grps)}, + {"exin", ARRAY_AND_SIZE(xrx100_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xrx100_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xrx100_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xrx100_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xrx100_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx100_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx100_mdio_grps)}, + {"dfe", ARRAY_AND_SIZE(xrx100_dfe_grps)}, +}; + +/* --------- xrx200 related code --------- */ +#define XRX200_MAX_PIN 50 + +static const struct ltq_mfp_pin xrx200_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY), + MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), + MFP_XWAY(GPIO4, GPIO, STP, DFE, USIF), + MFP_XWAY(GPIO5, GPIO, STP, GPHY, DFE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, USIF), + MFP_XWAY(GPIO7, GPIO, CGU, CBUS, GPHY), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), + MFP_XWAY(GPIO9, GPIO, USIF, SPI, EXIN), + MFP_XWAY(GPIO10, GPIO, USIF, SPI, EXIN), + MFP_XWAY(GPIO11, GPIO, USIF, CBUS, SPI), + MFP_XWAY(GPIO12, GPIO, USIF, CBUS, MCD), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, CBUS, USIF), + MFP_XWAY(GPIO15, GPIO, SPI, SDIO, MCD), + MFP_XWAY(GPIO16, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO17, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO18, GPIO, SPI, SDIO, NONE), + MFP_XWAY(GPIO19, GPIO, PCI, SDIO, CGU), + MFP_XWAY(GPIO20, GPIO, NONE, SDIO, EBU), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, CGU, EBU), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, SDIO, USIF), + MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), + MFP_XWAY(GPIO27, GPIO, TDM, SDIO, USIF), + MFP_XWAY(GPIO28, GPIO, GPT, PCI, SDIO), + MFP_XWAY(GPIO29, GPIO, PCI, CBUS, EXIN), + MFP_XWAY(GPIO30, GPIO, PCI, CBUS, NONE), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), + MFP_XWAY(GPIO32, GPIO, MII, NONE, EBU), + MFP_XWAY(GPIO33, GPIO, MII, NONE, EBU), + MFP_XWAY(GPIO34, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO35, GPIO, SIN, SSI, NONE), + MFP_XWAY(GPIO36, GPIO, SIN, SSI, EXIN), + MFP_XWAY(GPIO37, GPIO, USIF, NONE, PCI), + MFP_XWAY(GPIO38, GPIO, PCI, USIF, NONE), + MFP_XWAY(GPIO39, GPIO, USIF, EXIN, NONE), + MFP_XWAY(GPIO40, GPIO, MII, TDM, NONE), + MFP_XWAY(GPIO41, GPIO, MII, TDM, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, GPIO, MII, SIN, GPHY), + MFP_XWAY(GPIO45, GPIO, MII, GPHY, SIN), + MFP_XWAY(GPIO46, GPIO, MII, NONE, EXIN), + MFP_XWAY(GPIO47, GPIO, MII, GPHY, SIN), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), +}; + +static const unsigned xrx200_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9}; + +static const unsigned xrx200_pins_exin0[] = {GPIO0}; +static const unsigned xrx200_pins_exin1[] = {GPIO1}; +static const unsigned xrx200_pins_exin2[] = {GPIO2}; +static const unsigned xrx200_pins_exin3[] = {GPIO39}; +static const unsigned xrx200_pins_exin4[] = {GPIO10}; +static const unsigned xrx200_pins_exin5[] = {GPIO9}; + +static const unsigned xrx200_pins_usif_uart_rx[] = {GPIO11}; +static const unsigned xrx200_pins_usif_uart_tx[] = {GPIO12}; +static const unsigned xrx200_pins_usif_uart_rts[] = {GPIO9}; +static const unsigned xrx200_pins_usif_uart_cts[] = {GPIO10}; +static const unsigned xrx200_pins_usif_uart_dtr[] = {GPIO4}; +static const unsigned xrx200_pins_usif_uart_dsr[] = {GPIO6}; +static const unsigned xrx200_pins_usif_uart_dcd[] = {GPIO25}; +static const unsigned xrx200_pins_usif_uart_ri[] = {GPIO27}; + +static const unsigned xrx200_pins_usif_spi_di[] = {GPIO11}; +static const unsigned xrx200_pins_usif_spi_do[] = {GPIO12}; +static const unsigned xrx200_pins_usif_spi_clk[] = {GPIO38}; +static const unsigned xrx200_pins_usif_spi_cs0[] = {GPIO37}; +static const unsigned xrx200_pins_usif_spi_cs1[] = {GPIO39}; +static const unsigned xrx200_pins_usif_spi_cs2[] = {GPIO14}; + +static const unsigned xrx200_pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned xrx200_pins_nmi[] = {GPIO8}; +static const unsigned xrx200_pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned xrx200_pins_dfe_led0[] = {GPIO4}; +static const unsigned xrx200_pins_dfe_led1[] = {GPIO5}; + +static const unsigned xrx200_pins_gphy0_led0[] = {GPIO5}; +static const unsigned xrx200_pins_gphy0_led1[] = {GPIO7}; +static const unsigned xrx200_pins_gphy0_led2[] = {GPIO2}; +static const unsigned xrx200_pins_gphy1_led0[] = {GPIO44}; +static const unsigned xrx200_pins_gphy1_led1[] = {GPIO45}; +static const unsigned xrx200_pins_gphy1_led2[] = {GPIO47}; + +static const unsigned xrx200_pins_ebu_a24[] = {GPIO13}; +static const unsigned xrx200_pins_ebu_clk[] = {GPIO21}; +static const unsigned xrx200_pins_ebu_cs1[] = {GPIO23}; +static const unsigned xrx200_pins_ebu_a23[] = {GPIO24}; +static const unsigned xrx200_pins_ebu_wait[] = {GPIO26}; +static const unsigned xrx200_pins_ebu_a25[] = {GPIO31}; + +static const unsigned xrx200_pins_nand_ale[] = {GPIO13}; +static const unsigned xrx200_pins_nand_cs1[] = {GPIO23}; +static const unsigned xrx200_pins_nand_cle[] = {GPIO24}; +static const unsigned xrx200_pins_nand_rdy[] = {GPIO48}; +static const unsigned xrx200_pins_nand_rd[] = {GPIO49}; + +static const unsigned xrx200_pins_spi_di[] = {GPIO16}; +static const unsigned xrx200_pins_spi_do[] = {GPIO17}; +static const unsigned xrx200_pins_spi_clk[] = {GPIO18}; +static const unsigned xrx200_pins_spi_cs1[] = {GPIO15}; +static const unsigned xrx200_pins_spi_cs2[] = {GPIO22}; +static const unsigned xrx200_pins_spi_cs3[] = {GPIO13}; +static const unsigned xrx200_pins_spi_cs4[] = {GPIO10}; +static const unsigned xrx200_pins_spi_cs5[] = {GPIO9}; +static const unsigned xrx200_pins_spi_cs6[] = {GPIO11}; + +static const unsigned xrx200_pins_gpt1[] = {GPIO28}; +static const unsigned xrx200_pins_gpt2[] = {GPIO21}; +static const unsigned xrx200_pins_gpt3[] = {GPIO6}; + +static const unsigned xrx200_pins_clkout0[] = {GPIO8}; +static const unsigned xrx200_pins_clkout1[] = {GPIO7}; +static const unsigned xrx200_pins_clkout2[] = {GPIO3}; +static const unsigned xrx200_pins_clkout3[] = {GPIO2}; + +static const unsigned xrx200_pins_pci_gnt1[] = {GPIO28}; +static const unsigned xrx200_pins_pci_gnt2[] = {GPIO23}; +static const unsigned xrx200_pins_pci_gnt3[] = {GPIO19}; +static const unsigned xrx200_pins_pci_gnt4[] = {GPIO38}; +static const unsigned xrx200_pins_pci_req1[] = {GPIO29}; +static const unsigned xrx200_pins_pci_req2[] = {GPIO31}; +static const unsigned xrx200_pins_pci_req3[] = {GPIO3}; +static const unsigned xrx200_pins_pci_req4[] = {GPIO37}; + +static const struct ltq_pin_group xrx200_grps[] = { + GRP_MUX("exin0", EXIN, xrx200_pins_exin0), + GRP_MUX("exin1", EXIN, xrx200_pins_exin1), + GRP_MUX("exin2", EXIN, xrx200_pins_exin2), + GRP_MUX("exin3", EXIN, xrx200_pins_exin3), + GRP_MUX("exin4", EXIN, xrx200_pins_exin4), + GRP_MUX("exin5", EXIN, xrx200_pins_exin5), + GRP_MUX("ebu a23", EBU, xrx200_pins_ebu_a23), + GRP_MUX("ebu a24", EBU, xrx200_pins_ebu_a24), + GRP_MUX("ebu a25", EBU, xrx200_pins_ebu_a25), + GRP_MUX("ebu clk", EBU, xrx200_pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, xrx200_pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, xrx200_pins_ebu_wait), + GRP_MUX("nand ale", EBU, xrx200_pins_nand_ale), + GRP_MUX("nand cs1", EBU, xrx200_pins_nand_cs1), + GRP_MUX("nand cle", EBU, xrx200_pins_nand_cle), + GRP_MUX("nand rdy", EBU, xrx200_pins_nand_rdy), + GRP_MUX("nand rd", EBU, xrx200_pins_nand_rd), + GRP_MUX("spi_di", SPI, xrx200_pins_spi_di), + GRP_MUX("spi_do", SPI, xrx200_pins_spi_do), + GRP_MUX("spi_clk", SPI, xrx200_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, xrx200_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, xrx200_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, xrx200_pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, xrx200_pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6), + GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx), + GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx), + GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts), + GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts), + GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr), + GRP_MUX("usif uart_dsr", USIF, xrx200_pins_usif_uart_dsr), + GRP_MUX("usif uart_dcd", USIF, xrx200_pins_usif_uart_dcd), + GRP_MUX("usif uart_ri", USIF, xrx200_pins_usif_uart_ri), + GRP_MUX("usif spi_di", USIF, xrx200_pins_usif_spi_di), + GRP_MUX("usif spi_do", USIF, xrx200_pins_usif_spi_do), + GRP_MUX("usif spi_clk", USIF, xrx200_pins_usif_spi_clk), + GRP_MUX("usif spi_cs0", USIF, xrx200_pins_usif_spi_cs0), + GRP_MUX("usif spi_cs1", USIF, xrx200_pins_usif_spi_cs1), + GRP_MUX("usif spi_cs2", USIF, xrx200_pins_usif_spi_cs2), + GRP_MUX("stp", STP, xrx200_pins_stp), + GRP_MUX("nmi", NMI, xrx200_pins_nmi), + GRP_MUX("gpt1", GPT, xrx200_pins_gpt1), + GRP_MUX("gpt2", GPT, xrx200_pins_gpt2), + GRP_MUX("gpt3", GPT, xrx200_pins_gpt3), + GRP_MUX("clkout0", CGU, xrx200_pins_clkout0), + GRP_MUX("clkout1", CGU, xrx200_pins_clkout1), + GRP_MUX("clkout2", CGU, xrx200_pins_clkout2), + GRP_MUX("clkout3", CGU, xrx200_pins_clkout3), + GRP_MUX("gnt1", PCI, xrx200_pins_pci_gnt1), + GRP_MUX("gnt2", PCI, xrx200_pins_pci_gnt2), + GRP_MUX("gnt3", PCI, xrx200_pins_pci_gnt3), + GRP_MUX("gnt4", PCI, xrx200_pins_pci_gnt4), + GRP_MUX("req1", PCI, xrx200_pins_pci_req1), + GRP_MUX("req2", PCI, xrx200_pins_pci_req2), + GRP_MUX("req3", PCI, xrx200_pins_pci_req3), + GRP_MUX("req4", PCI, xrx200_pins_pci_req4), + GRP_MUX("mdio", MDIO, xrx200_pins_mdio), + GRP_MUX("dfe led0", DFE, xrx200_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, xrx200_pins_dfe_led1), + GRP_MUX("gphy0 led0", GPHY, xrx200_pins_gphy0_led0), + GRP_MUX("gphy0 led1", GPHY, xrx200_pins_gphy0_led1), + GRP_MUX("gphy0 led2", GPHY, xrx200_pins_gphy0_led2), + GRP_MUX("gphy1 led0", GPHY, xrx200_pins_gphy1_led0), + GRP_MUX("gphy1 led1", GPHY, xrx200_pins_gphy1_led1), + GRP_MUX("gphy1 led2", GPHY, xrx200_pins_gphy1_led2), +}; + +static const char * const xrx200_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "gnt4", + "req1", "req2", + "req3", "req4"}; +static const char * const xrx200_spi_grps[] = {"spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const xrx200_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const xrx200_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd"}; +static const char * const xrx200_exin_grps[] = {"exin0", "exin1", "exin2", + "exin3", "exin4", "exin5"}; +static const char * const xrx200_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const xrx200_usif_grps[] = {"usif uart_rx", "usif uart_tx", + "usif uart_rts", "usif uart_cts", + "usif uart_dtr", "usif uart_dsr", + "usif uart_dcd", "usif uart_ri", + "usif spi_di", "usif spi_do", + "usif spi_clk", "usif spi_cs0", + "usif spi_cs1", "usif spi_cs2"}; +static const char * const xrx200_stp_grps[] = {"stp"}; +static const char * const xrx200_nmi_grps[] = {"nmi"}; +static const char * const xrx200_mdio_grps[] = {"mdio"}; +static const char * const xrx200_dfe_grps[] = {"dfe led0", "dfe led1"}; +static const char * const xrx200_gphy_grps[] = {"gphy0 led0", "gphy0 led1", + "gphy0 led2", "gphy1 led0", + "gphy1 led1", "gphy1 led2"}; + +static const struct ltq_pmx_func xrx200_funcs[] = { + {"spi", ARRAY_AND_SIZE(xrx200_spi_grps)}, + {"usif", ARRAY_AND_SIZE(xrx200_usif_grps)}, + {"cgu", ARRAY_AND_SIZE(xrx200_cgu_grps)}, + {"exin", ARRAY_AND_SIZE(xrx200_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xrx200_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xrx200_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xrx200_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xrx200_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx200_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx200_mdio_grps)}, + {"dfe", ARRAY_AND_SIZE(xrx200_dfe_grps)}, + {"gphy", ARRAY_AND_SIZE(xrx200_gphy_grps)}, +}; + +/* --------- xrx300 related code --------- */ +#define XRX300_MAX_PIN 64 + +static const struct ltq_mfp_pin xrx300_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, EPHY, NONE), + MFP_XWAY(GPIO1, GPIO, NONE, EXIN, NONE), + MFP_XWAY(GPIO2, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO3, GPIO, CGU, NONE, NONE), + MFP_XWAY(GPIO4, GPIO, STP, DFE, NONE), + MFP_XWAY(GPIO5, GPIO, STP, EPHY, DFE), + MFP_XWAY(GPIO6, GPIO, STP, NONE, NONE), + MFP_XWAY(GPIO7, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO8, GPIO, CGU, GPHY, EPHY), + MFP_XWAY(GPIO9, GPIO, WIFI, NONE, EXIN), + MFP_XWAY(GPIO10, GPIO, USIF, SPI, EXIN), + MFP_XWAY(GPIO11, GPIO, USIF, WIFI, SPI), + MFP_XWAY(GPIO12, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO13, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, USIF, EPHY), + MFP_XWAY(GPIO15, GPIO, SPI, NONE, MCD), + MFP_XWAY(GPIO16, GPIO, SPI, EXIN, NONE), + MFP_XWAY(GPIO17, GPIO, SPI, NONE, NONE), + MFP_XWAY(GPIO18, GPIO, SPI, NONE, NONE), + MFP_XWAY(GPIO19, GPIO, USIF, NONE, EPHY), + MFP_XWAY(GPIO20, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO21, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO22, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO23, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO24, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO25, GPIO, TDM, NONE, NONE), + MFP_XWAY(GPIO26, GPIO, TDM, NONE, NONE), + MFP_XWAY(GPIO27, GPIO, TDM, NONE, NONE), + MFP_XWAY(GPIO28, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO29, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO30, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO31, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO32, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO33, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO34, GPIO, NONE, SSI, NONE), + MFP_XWAY(GPIO35, GPIO, NONE, SSI, NONE), + MFP_XWAY(GPIO36, GPIO, NONE, SSI, NONE), + MFP_XWAY(GPIO37, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO38, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO39, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO40, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO41, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO45, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO46, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO47, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO50, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO51, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO52, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO53, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO54, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO55, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO56, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO57, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO58, GPIO, EBU, TDM, NONE), + MFP_XWAY(GPIO59, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO60, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO61, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO62, NONE, NONE, NONE, NONE), + MFP_XWAY(GPIO63, NONE, NONE, NONE, NONE), +}; + +static const unsigned xrx300_exin_pin_map[] = {GPIO0, GPIO1, GPIO16, GPIO10, GPIO9}; + +static const unsigned xrx300_pins_exin0[] = {GPIO0}; +static const unsigned xrx300_pins_exin1[] = {GPIO1}; +static const unsigned xrx300_pins_exin2[] = {GPIO16}; +/* EXIN3 is not available on xrX300 */ +static const unsigned xrx300_pins_exin4[] = {GPIO10}; +static const unsigned xrx300_pins_exin5[] = {GPIO9}; + +static const unsigned xrx300_pins_usif_uart_rx[] = {GPIO11}; +static const unsigned xrx300_pins_usif_uart_tx[] = {GPIO10}; + +static const unsigned xrx300_pins_usif_spi_di[] = {GPIO11}; +static const unsigned xrx300_pins_usif_spi_do[] = {GPIO10}; +static const unsigned xrx300_pins_usif_spi_clk[] = {GPIO19}; +static const unsigned xrx300_pins_usif_spi_cs0[] = {GPIO14}; + +static const unsigned xrx300_pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned xrx300_pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned xrx300_pins_dfe_led0[] = {GPIO4}; +static const unsigned xrx300_pins_dfe_led1[] = {GPIO5}; + +static const unsigned xrx300_pins_ephy0_led0[] = {GPIO5}; +static const unsigned xrx300_pins_ephy0_led1[] = {GPIO8}; +static const unsigned xrx300_pins_ephy1_led0[] = {GPIO14}; +static const unsigned xrx300_pins_ephy1_led1[] = {GPIO19}; + +static const unsigned xrx300_pins_nand_ale[] = {GPIO13}; +static const unsigned xrx300_pins_nand_cs1[] = {GPIO23}; +static const unsigned xrx300_pins_nand_cle[] = {GPIO24}; +static const unsigned xrx300_pins_nand_rdy[] = {GPIO48}; +static const unsigned xrx300_pins_nand_rd[] = {GPIO49}; +static const unsigned xrx300_pins_nand_d1[] = {GPIO50}; +static const unsigned xrx300_pins_nand_d0[] = {GPIO51}; +static const unsigned xrx300_pins_nand_d2[] = {GPIO52}; +static const unsigned xrx300_pins_nand_d7[] = {GPIO53}; +static const unsigned xrx300_pins_nand_d6[] = {GPIO54}; +static const unsigned xrx300_pins_nand_d5[] = {GPIO55}; +static const unsigned xrx300_pins_nand_d4[] = {GPIO56}; +static const unsigned xrx300_pins_nand_d3[] = {GPIO57}; +static const unsigned xrx300_pins_nand_cs0[] = {GPIO58}; +static const unsigned xrx300_pins_nand_wr[] = {GPIO59}; +static const unsigned xrx300_pins_nand_wp[] = {GPIO60}; +static const unsigned xrx300_pins_nand_se[] = {GPIO61}; + +static const unsigned xrx300_pins_spi_di[] = {GPIO16}; +static const unsigned xrx300_pins_spi_do[] = {GPIO17}; +static const unsigned xrx300_pins_spi_clk[] = {GPIO18}; +static const unsigned xrx300_pins_spi_cs1[] = {GPIO15}; +/* SPI_CS2 is not available on xrX300 */ +/* SPI_CS3 is not available on xrX300 */ +static const unsigned xrx300_pins_spi_cs4[] = {GPIO10}; +/* SPI_CS5 is not available on xrX300 */ +static const unsigned xrx300_pins_spi_cs6[] = {GPIO11}; + +/* CLKOUT0 is not available on xrX300 */ +/* CLKOUT1 is not available on xrX300 */ +static const unsigned xrx300_pins_clkout2[] = {GPIO3}; + +static const struct ltq_pin_group xrx300_grps[] = { + GRP_MUX("exin0", EXIN, xrx300_pins_exin0), + GRP_MUX("exin1", EXIN, xrx300_pins_exin1), + GRP_MUX("exin2", EXIN, xrx300_pins_exin2), + GRP_MUX("exin4", EXIN, xrx300_pins_exin4), + GRP_MUX("exin5", EXIN, xrx300_pins_exin5), + GRP_MUX("nand ale", EBU, xrx300_pins_nand_ale), + GRP_MUX("nand cs1", EBU, xrx300_pins_nand_cs1), + GRP_MUX("nand cle", EBU, xrx300_pins_nand_cle), + GRP_MUX("nand rdy", EBU, xrx300_pins_nand_rdy), + GRP_MUX("nand rd", EBU, xrx300_pins_nand_rd), + GRP_MUX("nand d1", EBU, xrx300_pins_nand_d1), + GRP_MUX("nand d0", EBU, xrx300_pins_nand_d0), + GRP_MUX("nand d2", EBU, xrx300_pins_nand_d2), + GRP_MUX("nand d7", EBU, xrx300_pins_nand_d7), + GRP_MUX("nand d6", EBU, xrx300_pins_nand_d6), + GRP_MUX("nand d5", EBU, xrx300_pins_nand_d5), + GRP_MUX("nand d4", EBU, xrx300_pins_nand_d4), + GRP_MUX("nand d3", EBU, xrx300_pins_nand_d3), + GRP_MUX("nand cs0", EBU, xrx300_pins_nand_cs0), + GRP_MUX("nand wr", EBU, xrx300_pins_nand_wr), + GRP_MUX("nand wp", EBU, xrx300_pins_nand_wp), + GRP_MUX("nand se", EBU, xrx300_pins_nand_se), + GRP_MUX("spi_di", SPI, xrx300_pins_spi_di), + GRP_MUX("spi_do", SPI, xrx300_pins_spi_do), + GRP_MUX("spi_clk", SPI, xrx300_pins_spi_clk), + GRP_MUX("spi_cs1", SPI, xrx300_pins_spi_cs1), + GRP_MUX("spi_cs4", SPI, xrx300_pins_spi_cs4), + GRP_MUX("spi_cs6", SPI, xrx300_pins_spi_cs6), + GRP_MUX("usif uart_rx", USIF, xrx300_pins_usif_uart_rx), + GRP_MUX("usif uart_tx", USIF, xrx300_pins_usif_uart_tx), + GRP_MUX("usif spi_di", USIF, xrx300_pins_usif_spi_di), + GRP_MUX("usif spi_do", USIF, xrx300_pins_usif_spi_do), + GRP_MUX("usif spi_clk", USIF, xrx300_pins_usif_spi_clk), + GRP_MUX("usif spi_cs0", USIF, xrx300_pins_usif_spi_cs0), + GRP_MUX("stp", STP, xrx300_pins_stp), + GRP_MUX("clkout2", CGU, xrx300_pins_clkout2), + GRP_MUX("mdio", MDIO, xrx300_pins_mdio), + GRP_MUX("dfe led0", DFE, xrx300_pins_dfe_led0), + GRP_MUX("dfe led1", DFE, xrx300_pins_dfe_led1), + GRP_MUX("ephy0 led0", GPHY, xrx300_pins_ephy0_led0), + GRP_MUX("ephy0 led1", GPHY, xrx300_pins_ephy0_led1), + GRP_MUX("ephy1 led0", GPHY, xrx300_pins_ephy1_led0), + GRP_MUX("ephy1 led1", GPHY, xrx300_pins_ephy1_led1), +}; + +static const char * const xrx300_spi_grps[] = {"spi_di", "spi_do", + "spi_clk", "spi_cs1", + "spi_cs4", "spi_cs6"}; +static const char * const xrx300_cgu_grps[] = {"clkout2"}; +static const char * const xrx300_ebu_grps[] = {"nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd", "nand d1", + "nand d0", "nand d2", + "nand d7", "nand d6", + "nand d5", "nand d4", + "nand d3", "nand cs0", + "nand wr", "nand wp", + "nand se"}; +static const char * const xrx300_exin_grps[] = {"exin0", "exin1", "exin2", + "exin4", "exin5"}; +static const char * const xrx300_usif_grps[] = {"usif uart_rx", "usif uart_tx", + "usif spi_di", "usif spi_do", + "usif spi_clk", "usif spi_cs0"}; +static const char * const xrx300_stp_grps[] = {"stp"}; +static const char * const xrx300_mdio_grps[] = {"mdio"}; +static const char * const xrx300_dfe_grps[] = {"dfe led0", "dfe led1"}; +static const char * const xrx300_gphy_grps[] = {"ephy0 led0", "ephy0 led1", + "ephy1 led0", "ephy1 led1"}; + +static const struct ltq_pmx_func xrx300_funcs[] = { + {"spi", ARRAY_AND_SIZE(xrx300_spi_grps)}, + {"usif", ARRAY_AND_SIZE(xrx300_usif_grps)}, + {"cgu", ARRAY_AND_SIZE(xrx300_cgu_grps)}, + {"exin", ARRAY_AND_SIZE(xrx300_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xrx300_stp_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx300_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx300_mdio_grps)}, + {"dfe", ARRAY_AND_SIZE(xrx300_dfe_grps)}, + {"ephy", ARRAY_AND_SIZE(xrx300_gphy_grps)}, +}; + /* --------- pinconf related code --------- */ static int xway_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin, @@ -695,10 +1582,7 @@ static struct gpio_chip xway_chip = { /* --------- register the pinctrl layer --------- */ -static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; -static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0}; - -static struct pinctrl_xway_soc { +struct pinctrl_xway_soc { int pin_count; const struct ltq_mfp_pin *mfp; const struct ltq_pin_group *grps; @@ -707,22 +1591,54 @@ static struct pinctrl_xway_soc { unsigned int num_funcs; const unsigned *exin; unsigned int num_exin; -} soc_cfg[] = { - /* legacy xway */ - {XWAY_MAX_PIN, xway_mfp, - xway_grps, ARRAY_SIZE(xway_grps), - danube_funcs, ARRAY_SIZE(danube_funcs), - xway_exin_pin_map, 3}, - /* xway xr9 series */ - {XR9_MAX_PIN, xway_mfp, - xway_grps, ARRAY_SIZE(xway_grps), - xrx_funcs, ARRAY_SIZE(xrx_funcs), - xway_exin_pin_map, 6}, - /* xway ase series */ - {XWAY_MAX_PIN, ase_mfp, - ase_grps, ARRAY_SIZE(ase_grps), - ase_funcs, ARRAY_SIZE(ase_funcs), - ase_exin_pins_map, 3}, +}; + +/* xway xr9 series (DEPRECATED: Use XWAY xRX100/xRX200 Family) */ +static struct pinctrl_xway_soc xr9_pinctrl = { + XR9_MAX_PIN, xway_mfp, + xway_grps, ARRAY_SIZE(xway_grps), + xrx_funcs, ARRAY_SIZE(xrx_funcs), + xway_exin_pin_map, 6 +}; + +/* XWAY AMAZON Family */ +static struct pinctrl_xway_soc ase_pinctrl = { + ASE_MAX_PIN, ase_mfp, + ase_grps, ARRAY_SIZE(ase_grps), + ase_funcs, ARRAY_SIZE(ase_funcs), + ase_exin_pin_map, 3 +}; + +/* XWAY DANUBE Family */ +static struct pinctrl_xway_soc danube_pinctrl = { + DANUBE_MAX_PIN, danube_mfp, + danube_grps, ARRAY_SIZE(danube_grps), + danube_funcs, ARRAY_SIZE(danube_funcs), + danube_exin_pin_map, 3 +}; + +/* XWAY xRX100 Family */ +static struct pinctrl_xway_soc xrx100_pinctrl = { + XRX100_MAX_PIN, xrx100_mfp, + xrx100_grps, ARRAY_SIZE(xrx100_grps), + xrx100_funcs, ARRAY_SIZE(xrx100_funcs), + xrx100_exin_pin_map, 6 +}; + +/* XWAY xRX200 Family */ +static struct pinctrl_xway_soc xrx200_pinctrl = { + XRX200_MAX_PIN, xrx200_mfp, + xrx200_grps, ARRAY_SIZE(xrx200_grps), + xrx200_funcs, ARRAY_SIZE(xrx200_funcs), + xrx200_exin_pin_map, 6 +}; + +/* XWAY xRX300 Family */ +static struct pinctrl_xway_soc xrx300_pinctrl = { + XRX300_MAX_PIN, xrx300_mfp, + xrx300_grps, ARRAY_SIZE(xrx300_grps), + xrx300_funcs, ARRAY_SIZE(xrx300_funcs), + xrx300_exin_pin_map, 5 }; static struct pinctrl_gpio_range xway_gpio_range = { @@ -731,9 +1647,14 @@ static struct pinctrl_gpio_range xway_gpio_range = { }; static const struct of_device_id xway_match[] = { - { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]}, - { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]}, - { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]}, + { .compatible = "lantiq,pinctrl-xway", .data = &danube_pinctrl}, /*DEPRECATED*/ + { .compatible = "lantiq,pinctrl-xr9", .data = &xr9_pinctrl}, /*DEPRECATED*/ + { .compatible = "lantiq,pinctrl-ase", .data = &ase_pinctrl}, /*DEPRECATED*/ + { .compatible = "lantiq,ase-pinctrl", .data = &ase_pinctrl}, + { .compatible = "lantiq,danube-pinctrl", .data = &danube_pinctrl}, + { .compatible = "lantiq,xrx100-pinctrl", .data = &xrx100_pinctrl}, + { .compatible = "lantiq,xrx200-pinctrl", .data = &xrx200_pinctrl}, + { .compatible = "lantiq,xrx300-pinctrl", .data = &xrx300_pinctrl}, {}, }; MODULE_DEVICE_TABLE(of, xway_match); @@ -755,7 +1676,7 @@ static int pinmux_xway_probe(struct platform_device *pdev) if (match) xway_soc = (const struct pinctrl_xway_soc *) match->data; else - xway_soc = &soc_cfg[0]; + xway_soc = &danube_pinctrl; /* find out how many pads we have */ xway_chip.ngpio = xway_soc->pin_count; -- 2.1.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 3/4] pinctrl/lantiq: update devicetree binding in dts file 2015-11-25 10:18 ` Martin Schiller @ 2015-11-25 10:18 ` Martin Schiller -1 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-25 10:18 UTC (permalink / raw) To: linux-gpio, devicetree, linux-mips Cc: linus.walleij, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck, Martin Schiller This patch updates the compatible string in the easy50712.dts file to the new "lantiq,danube-pinctrl". Signed-off-by: Martin Schiller <mschiller@tdt.de> --- arch/mips/boot/dts/lantiq/easy50712.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts index 143b8a3..b599625 100644 --- a/arch/mips/boot/dts/lantiq/easy50712.dts +++ b/arch/mips/boot/dts/lantiq/easy50712.dts @@ -52,7 +52,7 @@ }; gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; + compatible = "lantiq,danube-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; -- 2.1.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 3/4] pinctrl/lantiq: update devicetree binding in dts file @ 2015-11-25 10:18 ` Martin Schiller 0 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-25 10:18 UTC (permalink / raw) To: linux-gpio, devicetree, linux-mips Cc: linus.walleij, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck, Martin Schiller This patch updates the compatible string in the easy50712.dts file to the new "lantiq,danube-pinctrl". Signed-off-by: Martin Schiller <mschiller@tdt.de> --- arch/mips/boot/dts/lantiq/easy50712.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts index 143b8a3..b599625 100644 --- a/arch/mips/boot/dts/lantiq/easy50712.dts +++ b/arch/mips/boot/dts/lantiq/easy50712.dts @@ -52,7 +52,7 @@ }; gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; + compatible = "lantiq,danube-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; -- 2.1.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux 2015-11-25 10:18 ` Martin Schiller @ 2015-11-25 10:18 ` Martin Schiller -1 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-25 10:18 UTC (permalink / raw) To: linux-gpio, devicetree, linux-mips Cc: linus.walleij, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck, Martin Schiller From: John Crispin <blogic@openwrt.org> This patch is included in the openwrt patchset for several years now and needs to go upstream as well. It includes the following changes: 1. Fix up inline function call to xway_mux_apply 2. Fix GPIO Setup of GPIO Port3 3. Implement gpio_chip.to_irq Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Martin Schiller <mschiller@tdt.de> --- drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index a064962..f0b1b48 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -1496,10 +1496,9 @@ static struct pinctrl_desc xway_pctrl_desc = { .confops = &xway_pinconf_ops, }; -static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, +static int mux_apply(struct ltq_pinmux_info *info, int pin, int mux) { - struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); int port = PORT(pin); u32 alt1_reg = GPIO_ALT1(pin); @@ -1519,6 +1518,14 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, return 0; } +static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, + int pin, int mux) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + return mux_apply(info, pin, mux); +} + static const struct ltq_cfg_param xway_cfg_params[] = { {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, @@ -1563,12 +1570,28 @@ static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val) { struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + if (PORT(pin) == PORT3) + gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin)); + else + gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin)); gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); xway_gpio_set(chip, pin, val); return 0; } +static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + int i; + + for (i = 0; i < info->num_exin; i++) + if (info->exin[i] == offset) + return ltq_eiu_get_irq(i); + + return -1; +} + static struct gpio_chip xway_chip = { .label = "gpio-xway", .direction_input = xway_gpio_dir_in, @@ -1577,6 +1600,7 @@ static struct gpio_chip xway_chip = { .set = xway_gpio_set, .request = gpiochip_generic_request, .free = gpiochip_generic_free, + .to_irq = xway_gpio_to_irq, .base = -1, }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux @ 2015-11-25 10:18 ` Martin Schiller 0 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-25 10:18 UTC (permalink / raw) To: linux-gpio, devicetree, linux-mips Cc: linus.walleij, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck, Martin Schiller From: John Crispin <blogic@openwrt.org> This patch is included in the openwrt patchset for several years now and needs to go upstream as well. It includes the following changes: 1. Fix up inline function call to xway_mux_apply 2. Fix GPIO Setup of GPIO Port3 3. Implement gpio_chip.to_irq Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Martin Schiller <mschiller@tdt.de> --- drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index a064962..f0b1b48 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -1496,10 +1496,9 @@ static struct pinctrl_desc xway_pctrl_desc = { .confops = &xway_pinconf_ops, }; -static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, +static int mux_apply(struct ltq_pinmux_info *info, int pin, int mux) { - struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); int port = PORT(pin); u32 alt1_reg = GPIO_ALT1(pin); @@ -1519,6 +1518,14 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, return 0; } +static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, + int pin, int mux) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + return mux_apply(info, pin, mux); +} + static const struct ltq_cfg_param xway_cfg_params[] = { {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, @@ -1563,12 +1570,28 @@ static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val) { struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + if (PORT(pin) == PORT3) + gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin)); + else + gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin)); gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); xway_gpio_set(chip, pin, val); return 0; } +static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + int i; + + for (i = 0; i < info->num_exin; i++) + if (info->exin[i] == offset) + return ltq_eiu_get_irq(i); + + return -1; +} + static struct gpio_chip xway_chip = { .label = "gpio-xway", .direction_input = xway_gpio_dir_in, @@ -1577,6 +1600,7 @@ static struct gpio_chip xway_chip = { .set = xway_gpio_set, .request = gpiochip_generic_request, .free = gpiochip_generic_free, + .to_irq = xway_gpio_to_irq, .base = -1, }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux 2015-11-25 10:18 ` Martin Schiller (?) @ 2015-11-25 10:40 ` Jonas Gorski 2015-11-26 6:40 ` Martin Schiller -1 siblings, 1 reply; 15+ messages in thread From: Jonas Gorski @ 2015-11-25 10:40 UTC (permalink / raw) To: Martin Schiller Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, MIPS Mailing List, Linus Walleij, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ralf Baechle, John Crispin, Hauke Mehrtens, daniel.schwierzeck Hi On Wed, Nov 25, 2015 at 11:18 AM, Martin Schiller <mschiller@tdt.de> wrote: > From: John Crispin <blogic@openwrt.org> > > This patch is included in the openwrt patchset for several years now and needs > to go upstream as well. It includes the following changes: > 1. Fix up inline function call to xway_mux_apply This really needs an explanation what is being fixed here. > 2. Fix GPIO Setup of GPIO Port3 This change looks fine. > 3. Implement gpio_chip.to_irq These are three different changes (two fixes, one new feature) and therefore should be split up into three patches. > Signed-off-by: John Crispin <blogic@openwrt.org> > Signed-off-by: Martin Schiller <mschiller@tdt.de> > --- Also please provide a changelog for your patches here. > drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- > 1 file changed, 26 insertions(+), 2 deletions(-) > Jonas ^ permalink raw reply [flat|nested] 15+ messages in thread
* RE: [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux 2015-11-25 10:40 ` Jonas Gorski @ 2015-11-26 6:40 ` Martin Schiller 2015-11-26 7:04 ` John Crispin 0 siblings, 1 reply; 15+ messages in thread From: Martin Schiller @ 2015-11-26 6:40 UTC (permalink / raw) To: Jonas Gorski Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, MIPS Mailing List, Linus Walleij, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ralf Baechle, John Crispin, Hauke Mehrtens, daniel.schwierzeck@gmail.com On 11/25/2015 at 11:40 AM, Jonas Gorski wrote: > Hi > > On Wed, Nov 25, 2015 at 11:18 AM, Martin Schiller <mschiller@tdt.de> > wrote: > > From: John Crispin <blogic@openwrt.org> > > > > This patch is included in the openwrt patchset for several years now > and needs > > to go upstream as well. It includes the following changes: > > 1. Fix up inline function call to xway_mux_apply > > This really needs an explanation what is being fixed here. I hope John - as the original author of this patch - can explain why this change is necessary. > > > 2. Fix GPIO Setup of GPIO Port3 > > This change looks fine. > > > 3. Implement gpio_chip.to_irq > > These are three different changes (two fixes, one new feature) and > therefore should be split up into three patches. As I'm not the author of this patch, I decided to leave it as it is. But per se you are right, it would be better to split it up. > > > Signed-off-by: John Crispin <blogic@openwrt.org> > > Signed-off-by: Martin Schiller <mschiller@tdt.de> > > --- > > Also please provide a changelog for your patches here. OK. > > > drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- > > 1 file changed, 26 insertions(+), 2 deletions(-) > > > > > Jonas Martin ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux 2015-11-26 6:40 ` Martin Schiller @ 2015-11-26 7:04 ` John Crispin 2015-11-26 7:15 ` Martin Schiller 0 siblings, 1 reply; 15+ messages in thread From: John Crispin @ 2015-11-26 7:04 UTC (permalink / raw) To: Martin Schiller, Jonas Gorski Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, MIPS Mailing List, Linus Walleij, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ralf Baechle, Hauke Mehrtens, daniel.schwierzeck@gmail.com On 26/11/2015 07:40, Martin Schiller wrote: > On 11/25/2015 at 11:40 AM, Jonas Gorski wrote: >> Hi >> >> On Wed, Nov 25, 2015 at 11:18 AM, Martin Schiller <mschiller@tdt.de> >> wrote: >>> From: John Crispin <blogic@openwrt.org> >>> >>> This patch is included in the openwrt patchset for several years now >> and needs >>> to go upstream as well. It includes the following changes: >>> 1. Fix up inline function call to xway_mux_apply >> >> This really needs an explanation what is being fixed here. > > I hope John - as the original author of this patch - can explain > why this change is necessary. what change? why am I in Cc: and not To: if an action is required ? John > >> >>> 2. Fix GPIO Setup of GPIO Port3 >> >> This change looks fine. >> >>> 3. Implement gpio_chip.to_irq >> >> These are three different changes (two fixes, one new feature) and >> therefore should be split up into three patches. > > As I'm not the author of this patch, I decided to leave it as it is. > But per se you are right, it would be better to split it up. > >> >>> Signed-off-by: John Crispin <blogic@openwrt.org> >>> Signed-off-by: Martin Schiller <mschiller@tdt.de> >>> --- >> >> Also please provide a changelog for your patches here. > > OK. > >> >>> drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- >>> 1 file changed, 26 insertions(+), 2 deletions(-) >>> >> >> >> Jonas > > Martin > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* RE: [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux 2015-11-26 7:04 ` John Crispin @ 2015-11-26 7:15 ` Martin Schiller 2015-11-26 7:20 ` John Crispin 0 siblings, 1 reply; 15+ messages in thread From: Martin Schiller @ 2015-11-26 7:15 UTC (permalink / raw) To: John Crispin, Jonas Gorski Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, MIPS Mailing List, Linus Walleij, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ralf Baechle, Hauke Mehrtens, daniel.schwierzeck@gmail.com On 11/26/2015 at 8:04 AM, John Crispin wrote: > > > On 26/11/2015 07:40, Martin Schiller wrote: > > On 11/25/2015 at 11:40 AM, Jonas Gorski wrote: > >> Hi > >> > >> On Wed, Nov 25, 2015 at 11:18 AM, Martin Schiller <mschiller@tdt.de> > >> wrote: > >>> From: John Crispin <blogic@openwrt.org> > >>> > >>> This patch is included in the openwrt patchset for several years > now > >> and needs > >>> to go upstream as well. It includes the following changes: > >>> 1. Fix up inline function call to xway_mux_apply > >> > >> This really needs an explanation what is being fixed here. > > > > I hope John - as the original author of this patch - can explain > > why this change is necessary. > > what change? why am I in Cc: and not To: if an action is required ? > > John That change is meant: ######################################################################## > diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl- > xway.c > index a064962..f0b1b48 100644 > --- a/drivers/pinctrl/pinctrl-xway.c > +++ b/drivers/pinctrl/pinctrl-xway.c > @@ -1496,10 +1496,9 @@ static struct pinctrl_desc xway_pctrl_desc = { > .confops= &xway_pinconf_ops, > }; > > -static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, > +static int mux_apply(struct ltq_pinmux_info *info, > int pin, int mux) > { > -struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); > int port = PORT(pin); > u32 alt1_reg = GPIO_ALT1(pin); > > @@ -1519,6 +1518,14 @@ static inline int xway_mux_apply(struct > pinctrl_dev *pctrldev, > return 0; > } > > +static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, > +int pin, int mux) > +{ > +struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); > + > +return mux_apply(info, pin, mux); > +} > + > static const struct ltq_cfg_param xway_cfg_params[] = { > {"lantiq,pull",LTQ_PINCONF_PARAM_PULL}, > {"lantiq,open-drain",LTQ_PINCONF_PARAM_OPEN_DRAIN}, ####################################################################### > > > > >> > >>> 2. Fix GPIO Setup of GPIO Port3 > >> > >> This change looks fine. > >> > >>> 3. Implement gpio_chip.to_irq > >> > >> These are three different changes (two fixes, one new feature) and > >> therefore should be split up into three patches. > > > > As I'm not the author of this patch, I decided to leave it as it is. > > But per se you are right, it would be better to split it up. > > > >> > >>> Signed-off-by: John Crispin <blogic@openwrt.org> > >>> Signed-off-by: Martin Schiller <mschiller@tdt.de> > >>> --- > >> > >> Also please provide a changelog for your patches here. > > > > OK. > > > >> > >>> drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- > >>> 1 file changed, 26 insertions(+), 2 deletions(-) > >>> > >> > >> > >> Jonas > > > > Martin > > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux 2015-11-26 7:15 ` Martin Schiller @ 2015-11-26 7:20 ` John Crispin 2015-11-26 7:47 ` Martin Schiller 0 siblings, 1 reply; 15+ messages in thread From: John Crispin @ 2015-11-26 7:20 UTC (permalink / raw) To: Martin Schiller, Jonas Gorski Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, MIPS Mailing List, Linus Walleij, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ralf Baechle, Hauke Mehrtens, daniel.schwierzeck@gmail.com On 26/11/2015 08:15, Martin Schiller wrote: > On 11/26/2015 at 8:04 AM, John Crispin wrote: >> >> >> On 26/11/2015 07:40, Martin Schiller wrote: >>> On 11/25/2015 at 11:40 AM, Jonas Gorski wrote: >>>> Hi >>>> >>>> On Wed, Nov 25, 2015 at 11:18 AM, Martin Schiller <mschiller@tdt.de> >>>> wrote: >>>>> From: John Crispin <blogic@openwrt.org> >>>>> >>>>> This patch is included in the openwrt patchset for several years >> now >>>> and needs >>>>> to go upstream as well. It includes the following changes: >>>>> 1. Fix up inline function call to xway_mux_apply >>>> >>>> This really needs an explanation what is being fixed here. >>> >>> I hope John - as the original author of this patch - can explain >>> why this change is necessary. >> >> what change? why am I in Cc: and not To: if an action is required ? >> >> John > > That change is meant: > ######################################################################## >> diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl- >> xway.c >> index a064962..f0b1b48 100644 >> --- a/drivers/pinctrl/pinctrl-xway.c >> +++ b/drivers/pinctrl/pinctrl-xway.c >> @@ -1496,10 +1496,9 @@ static struct pinctrl_desc xway_pctrl_desc = { >> .confops= &xway_pinconf_ops, >> }; >> >> -static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, >> +static int mux_apply(struct ltq_pinmux_info *info, >> int pin, int mux) >> { >> -struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); >> int port = PORT(pin); >> u32 alt1_reg = GPIO_ALT1(pin); >> >> @@ -1519,6 +1518,14 @@ static inline int xway_mux_apply(struct >> pinctrl_dev *pctrldev, >> return 0; >> } >> >> +static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, >> +int pin, int mux) >> +{ >> +struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); >> + >> +return mux_apply(info, pin, mux); >> +} >> + >> static const struct ltq_cfg_param xway_cfg_params[] = { >> {"lantiq,pull",LTQ_PINCONF_PARAM_PULL}, >> {"lantiq,open-drain",LTQ_PINCONF_PARAM_OPEN_DRAIN}, > ####################################################################### > ok so you picked up a patch and sent it upstream without looking at what it really does. the patch is simply not ready for upstream. the problem here is copy & paste inconsistency. however if we want to resolve this we should either keep the inlines and just stick to the current code pattern used or we could just assume that the compiler will be smart enough to to know when to inline and remove all of them. i'll leave it up to you to decide and propose your solution as a patch with an explanation. John >> >>> >>>> >>>>> 2. Fix GPIO Setup of GPIO Port3 >>>> >>>> This change looks fine. >>>> >>>>> 3. Implement gpio_chip.to_irq >>>> >>>> These are three different changes (two fixes, one new feature) and >>>> therefore should be split up into three patches. >>> >>> As I'm not the author of this patch, I decided to leave it as it is. >>> But per se you are right, it would be better to split it up. >>> >>>> >>>>> Signed-off-by: John Crispin <blogic@openwrt.org> >>>>> Signed-off-by: Martin Schiller <mschiller@tdt.de> >>>>> --- >>>> >>>> Also please provide a changelog for your patches here. >>> >>> OK. >>> >>>> >>>>> drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- >>>>> 1 file changed, 26 insertions(+), 2 deletions(-) >>>>> >>>> >>>> >>>> Jonas >>> >>> Martin >>> >>> > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* RE: [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux 2015-11-26 7:20 ` John Crispin @ 2015-11-26 7:47 ` Martin Schiller 0 siblings, 0 replies; 15+ messages in thread From: Martin Schiller @ 2015-11-26 7:47 UTC (permalink / raw) To: John Crispin, Jonas Gorski Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, MIPS Mailing List, Linus Walleij, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Ralf Baechle, Hauke Mehrtens, daniel.schwierzeck@gmail.com On 11/26/2015 at 8:20 AM, John Crispin wrote: > > > On 26/11/2015 08:15, Martin Schiller wrote: > > On 11/26/2015 at 8:04 AM, John Crispin wrote: > >> > >> > >> On 26/11/2015 07:40, Martin Schiller wrote: > >>> On 11/25/2015 at 11:40 AM, Jonas Gorski wrote: > >>>> Hi > >>>> > >>>> On Wed, Nov 25, 2015 at 11:18 AM, Martin Schiller > <mschiller@tdt.de> > >>>> wrote: > >>>>> From: John Crispin <blogic@openwrt.org> > >>>>> > >>>>> This patch is included in the openwrt patchset for several years > >> now > >>>> and needs > >>>>> to go upstream as well. It includes the following changes: > >>>>> 1. Fix up inline function call to xway_mux_apply > >>>> > >>>> This really needs an explanation what is being fixed here. > >>> > >>> I hope John - as the original author of this patch - can explain > >>> why this change is necessary. > >> > >> what change? why am I in Cc: and not To: if an action is required ? > >> > >> John > > > > That change is meant: > > > ####################################################################### > # > >> diff --git a/drivers/pinctrl/pinctrl-xway.c > b/drivers/pinctrl/pinctrl- > >> xway.c > >> index a064962..f0b1b48 100644 > >> --- a/drivers/pinctrl/pinctrl-xway.c > >> +++ b/drivers/pinctrl/pinctrl-xway.c > >> @@ -1496,10 +1496,9 @@ static struct pinctrl_desc xway_pctrl_desc = > { > >> .confops= &xway_pinconf_ops, > >> }; > >> > >> -static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, > >> +static int mux_apply(struct ltq_pinmux_info *info, > >> int pin, int mux) > >> { > >> -struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); > >> int port = PORT(pin); > >> u32 alt1_reg = GPIO_ALT1(pin); > >> > >> @@ -1519,6 +1518,14 @@ static inline int xway_mux_apply(struct > >> pinctrl_dev *pctrldev, > >> return 0; > >> } > >> > >> +static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, > >> +int pin, int mux) > >> +{ > >> +struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); > >> + > >> +return mux_apply(info, pin, mux); > >> +} > >> + > >> static const struct ltq_cfg_param xway_cfg_params[] = { > >> {"lantiq,pull",LTQ_PINCONF_PARAM_PULL}, > >> {"lantiq,open-drain",LTQ_PINCONF_PARAM_OPEN_DRAIN}, > > > ####################################################################### > > > > ok so you picked up a patch and sent it upstream without looking at > what > it really does. the patch is simply not ready for upstream. the problem > here is copy & paste inconsistency. Of course I analyzed the whole patch and - as you may have noticed - added a description for the 3 changes which were made in this patch. I also know that this first part of the patch changes the scope of the inline code, but I did not know why this change was done. > > however if we want to resolve this we should either keep the inlines > and > just stick to the current code pattern used or we could just assume > that > the compiler will be smart enough to to know when to inline and remove > all of them. > > i'll leave it up to you to decide and propose your solution as a patch > with an explanation. > > John So I think it would be the best for now to leave this code as it is and make two separate patches from the remaining two changes: - Fix GPIO Setup of GPIO Port3 - Implement gpio_chip.to_irq Martin > > > >> > >>> > >>>> > >>>>> 2. Fix GPIO Setup of GPIO Port3 > >>>> > >>>> This change looks fine. > >>>> > >>>>> 3. Implement gpio_chip.to_irq > >>>> > >>>> These are three different changes (two fixes, one new feature) and > >>>> therefore should be split up into three patches. > >>> > >>> As I'm not the author of this patch, I decided to leave it as it > is. > >>> But per se you are right, it would be better to split it up. > >>> > >>>> > >>>>> Signed-off-by: John Crispin <blogic@openwrt.org> > >>>>> Signed-off-by: Martin Schiller <mschiller@tdt.de> > >>>>> --- > >>>> > >>>> Also please provide a changelog for your patches here. > >>> > >>> OK. > >>> > >>>> > >>>>> drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- > >>>>> 1 file changed, 26 insertions(+), 2 deletions(-) > >>>>> > >>>> > >>>> > >>>> Jonas > >>> > >>> Martin > >>> > >>> > > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 1/4] pinctrl/lantiq: updating devicetree binding description 2015-11-25 10:18 ` Martin Schiller ` (3 preceding siblings ...) (?) @ 2015-11-25 20:05 ` Rob Herring -1 siblings, 0 replies; 15+ messages in thread From: Rob Herring @ 2015-11-25 20:05 UTC (permalink / raw) To: Martin Schiller Cc: linux-gpio, devicetree, linux-mips, linus.walleij, pawel.moll, mark.rutland, ijc+devicetree, galak, ralf, blogic, hauke, jogo, daniel.schwierzeck On Wed, Nov 25, 2015 at 11:18:56AM +0100, Martin Schiller wrote: > This patch adds the new dedicated "lantiq,<chip>-pinctrl" compatible strings > to the devicetree bindings Documentation, where <chip> is one of "ase", > "danube", "xrx100", "xrx200" or "xrx300" and marks the "lantiq,pinctrl-xway", > "lantiq,pinctrl-ase" and "lantiq,pinctrl-xr9" compatible strings as DEPRECATED. > > Signed-off-by: Martin Schiller <mschiller@tdt.de> Acked-by: Rob Herring <robh@kernel.org> > --- > .../bindings/pinctrl/lantiq,pinctrl-xway.txt | 110 +++++++++++++++++++-- > 1 file changed, 102 insertions(+), 8 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt > index e89b467..8e5216b 100644 > --- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt > +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt > @@ -1,7 +1,16 @@ > Lantiq XWAY pinmux controller > > Required properties: > -- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" > +- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube") > + "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or > + "lantiq,xrx200-pinctrl") > + "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl") > + "lantiq,<chip>-pinctrl", where <chip> is: > + "ase" (XWAY AMAZON Family) > + "danube" (XWAY DANUBE Family) > + "xrx100" (XWAY xRX100 Family) > + "xrx200" (XWAY xRX200 Family) > + "xrx300" (XWAY xRX300 Family) > - reg: Should contain the physical address and length of the gpio/pinmux > register range > > @@ -36,19 +45,87 @@ Required subnode-properties: > > Valid values for group and function names: > > +XWAY: (DEPRECATED: Use DANUBE) > mux groups: > exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, > ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, > - spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, > + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, > gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, > req3 > > - additional mux groups (XR9 only): > - mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 > + functions: > + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu > + > +XR9: ( DEPRECATED: Use xRX100/xRX200) > + mux groups: > + exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25, > + ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, > + nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, > + asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, > + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, > + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 > + > + functions: > + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy > + > +AMAZON: > + mux groups: > + exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, > + spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0, > + clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2 > + > + functions: > + spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe > + > +DANUBE: > + mux groups: > + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, > + ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1, > + spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, > + gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, > + req1, req2, req3, dfe led0, dfe led1 > > functions: > - spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio > + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe > > +xRX100: > + mux groups: > + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, > + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, > + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, > + spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, > + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, > + dfe led0, dfe led1 > + > + functions: > + spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe > + > +xRX200: > + mux groups: > + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, > + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, > + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, > + spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts, > + usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di, > + usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2, > + stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, > + gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1, > + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 > + > + functions: > + spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy > + > +xRX300: > + mux groups: > + exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle, > + nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5, > + nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do, > + spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx, > + usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2, > + mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1 > + > + functions: > + spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy > > > Definition of pin configurations: > @@ -62,15 +139,32 @@ Optional subnode-properties: > 0: none, 1: down, 2: up. > - lantiq,open-drain: Boolean, enables open-drain on the defined pin. > > -Valid values for XWAY pin names: > +Valid values for XWAY pin names: (DEPRECATED: Use DANUBE) > Pinconf pins can be referenced via the names io0-io31. > > -Valid values for XR9 pin names: > +Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200) > Pinconf pins can be referenced via the names io0-io55. > > +Valid values for AMAZON pin names: > + Pinconf pins can be referenced via the names io0-io31. > + > +Valid values for DANUBE pin names: > + Pinconf pins can be referenced via the names io0-io31. > + > +Valid values for xRX100 pin names: > + Pinconf pins can be referenced via the names io0-io55. > + > +Valid values for xRX200 pin names: > + Pinconf pins can be referenced via the names io0-io49. > + > +Valid values for xRX300 pin names: > + Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11, > + io13-io19,io23-io27,io34-io36, > + io42-io43,io48-io61. > + > Example: > gpio: pinmux@E100B10 { > - compatible = "lantiq,pinctrl-xway"; > + compatible = "lantiq,danube-pinctrl"; > pinctrl-names = "default"; > pinctrl-0 = <&state_default>; > > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2015-11-26 7:47 UTC | newest] Thread overview: 15+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-11-25 10:18 [PATCH v2 1/4] pinctrl/lantiq: updating devicetree binding description Martin Schiller 2015-11-25 10:18 ` Martin Schiller 2015-11-25 10:18 ` [PATCH v2 2/4] pinctrl/lantiq: introduce new dedicated devicetree bindings Martin Schiller 2015-11-25 10:18 ` Martin Schiller 2015-11-25 10:18 ` [PATCH v2 3/4] pinctrl/lantiq: update devicetree binding in dts file Martin Schiller 2015-11-25 10:18 ` Martin Schiller 2015-11-25 10:18 ` [PATCH v2 4/4] pinctrl/lantiq: fix up pinmux Martin Schiller 2015-11-25 10:18 ` Martin Schiller 2015-11-25 10:40 ` Jonas Gorski 2015-11-26 6:40 ` Martin Schiller 2015-11-26 7:04 ` John Crispin 2015-11-26 7:15 ` Martin Schiller 2015-11-26 7:20 ` John Crispin 2015-11-26 7:47 ` Martin Schiller 2015-11-25 20:05 ` [PATCH v2 1/4] pinctrl/lantiq: updating devicetree binding description Rob Herring
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.