Re: [PATCH 05/10] Input: synaptics-rmi4: Add device tree support for 2d sensors and F11

[Andrew Duggan <aduggan@synaptics.com>]

Hi Rob,

Thanks for reviewing! I will incorporate your feedback into the next 
version.

Andrew

On 11/27/2015 01:10 PM, Rob Herring wrote:
> On Wed, Nov 25, 2015 at 04:09:13PM -0800, Andrew Duggan wrote:
>> 2D sensors have several parameter which can be set in the platform data.
>> This patch adds support for getting those values from devicetree.
>>
>> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
>> ---
>>   .../bindings/input/rmi4/rmi_2d_sensor.txt          |  54 +++++++++++
>>   drivers/input/rmi4/rmi_2d_sensor.c                 | 103 +++++++++++++++++++++
>>   drivers/input/rmi4/rmi_2d_sensor.h                 |   3 +
>>   drivers/input/rmi4/rmi_f11.c                       |   7 +-
>>   4 files changed, 166 insertions(+), 1 deletion(-)
>>   create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
>>
>> diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
>> new file mode 100644
>> index 0000000..bbff31b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
>> @@ -0,0 +1,54 @@
>> +Synaptics RMI4 2D Sensor Device Binding
>> +
>> +The Synaptics RMI4 core is able to support RMI4 devices using differnet
> s/differnet/different/
>
>> +transports and differnet functions. This file describes the device tree
> ditto.
>
>> +bindings for devices which contain 2D sensors using Function 11 or
>> +Function 12. Complete documentation for transports and other functions
>> +can be found in:
>> +Documentation/devicetree/bindings/input/rmi4.
>> +
>> +RMI4 Function 11 and Function 12 are for 2D touch position sensing.
>> +Additional documentation for F11 can be found at:
>> +http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
>> +
>> +Optional Properties:
>> +- syna,swap-axes: Swap X and Y positions when reporting (boolean).
>> +- syna,flip-x: Reverse the direction of X (boolean).
>> +- syna,flip-y: Reverse the direction of Y (boolean).
> We already have similar, generic properties for these.
>
>> +- syna,clip-x-low: Sets a minimum value for X.
>> +- syna,clip-y-low: Sets a minimum value for Y.
>> +- syna,clip-x-high: Sets a maximum value for X.
>> +- syna,clip-y-high: Sets a maximum value for Y.
>> +- syna,offset-x: Add an offset to X.
>> +- syna,offset_y: Add an offset to Y.
> Don't use "_".
>
>> +- syna,delta-x-threshold: Set the minimum distance on the X axis required
>> +				to generate an interrupt in reduced reporting
>> +				mode.
>> +- syna,delta-y-threshold: Set the minimum distance on the Y axis required
>> +				to generate an interrupt in reduced reporting
>> +				mode.
>> +- syna,type-a: Report type A multitouch events.
>> +- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad.
>> +- syna,x-mm: The length in millimeters of the X axis.
>> +- syna,y-mm: The length in millimeters of the Y axis.
> I think some of these have common properties defined too. If not, we
> should add them.
>
>> +- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to
>> +				disable reporing absolute position data.
>> +- syna,rezero-wait: Time in miliseconds to wait after issuing a rezero
>> +				command.
> Add -msec suffix.